An aqueous synthesis of porous PtPd nanoparticles with reversed bimetallic structures for highly efficient hydrogen generation from ammonia borane hydrolysis

Ratiometric electrochemical immunosensor for simultaneous detection of C-myc and Bcl-2 based on multi-role alloy composites

A ratiometric electrochemical immunosensor is proposed for simultaneous detection of cellular-myelocytomatosis oncoprotein (C-myc) and B-cell lymphoma 2 (Bcl-2) via the potential-resolved strategy. It relied on multi-role co-loaded alloy composites (CLACs) and poly(3,4-ethylenedioxythiophene) (PEDOT)-graphene oxide (GO)-multiwalled carbon nanotubes (MWCNTs) (PGM) modified electrodes. CLACs with good catalytic and enzyme-like properties were synthesized in one step by loading tetramethylbenzidine (TMB) or methylene blue (MB) into Pt-Pd alloy and used as label materials. After immunological reactions, CLACs showed distinguishable dual differential pulse voltammetry signals at  - 0.26 V and 0.38 V, corresponding to C-myc and Bcl-2, and the PGM had an electrochemical signal at 1.2 V, which could be used as a reference signal to construct a ratiometric sensor. CLACs had a satisfactory synergistic effect with the PGM, and eventually achieved quadruple signal amplification. Thus, benefiting from multiple magnification and ratiometric self-calibration functions, sensitive detections of C-myc and Bcl-2 were achieved, with detection limits as low as 0.5 and 2.5 pg mL-1, respectively. Additionally, when the designed method was applied to blood samples from lymphoma patients, results consistent with the ELISA kit were obtained. This will open avenues for constructing multiple protein detection sensors.

Highly electron-deficient ultrathin Co nanosheets supported on mesoporous Cr2O3 for catalytic hydrogen evolution from ammonia borane

The hydrolysis of ammonia borane (NH3BH3) on metal-based heterogeneous catalysts under light irradiation has been considered as an efficient technique for hydrogen (H2) generation, in which the activity of the catalyst can be improved by increasing the electron density of the active metal. However, studies focused on reducing the electron density of the active metal are rare. Here, we report an electron density manipulation strategy to prepare highly electron-deficient ultrathin Co nanosheets via transferring nanosheets to support mesoporous Cr2O3 by simple one-step in situ reduction (denoted as Co/Cr2O3). X-ray photoelectron spectroscopy (XPS) and X-ray absorption near-edge structure (XANES) spectra confirm the formation of electron-deficient Co nanosheets and the Co-O-Cr bond due to electron transfer from the nanosheets to mesoporous Cr2O3. Importantly, the Co-O-Cr bond can work as a bridge to accelerate the electron transfer under light irradiation and then improve the electron-deficiency degree of Co nanosheets. As a result, the optimal Co/Cr2O3 exhibits a high intrinsic catalytic performance with the turnover frequency (TOF) value of 106.8 min-1 and significantly reduces the activation energy (Ea) to 16.8 kJ mol-1 under visible light irradiation, which make it among the best ever recorded monometallic Co-based catalyst with enriched electrons. The density functional theory (DFT) calculation results suggest that the electron-deficient Co nanosheets are responsible for the greatly decreased H2O activation and dissociation energy barriers and then the acceleration of the evolution of H2. The work provides a new perspective for designing high efficiency catalysts for H2 production, which is beneficial for relative energy conversion and storage catalysis.

The Competition between 4-Nitrophenol Reduction and BH4- Hydrolysis on Metal Nanoparticle Catalysts

Assessing competitive environmental catalytic reduction processes via NaBH4 is essential, as BH4- is both an energy carrier (as H2) and a reducing agent. A comprehensive catalytic study of the competition between the borohydride hydrolysis reaction (BHR, releasing H2) and 4-nitrophenol reduction via BH4- on M0- and M/M' (alloy)-nanoparticle catalysts is reported. The results reveal an inverse correlation between the catalytic efficiency for BH4- hydrolysis and 4-nitrophenol reduction, indicating that catalysts performing well in one process exhibit lower activity in the other. Plausible catalytic mechanisms are discussed, focusing on the impact of reaction products such as 4-aminophenol and borate on the rate and yield of BH4- hydrolysis. The investigated catalysts were Ag0, Au0, Pt0, and Ag/Pt-alloy nanoparticles synthesized without any added stabilizer. Notably, the observed rate constants for the 4-nitrophenol reduction on Ag0, Ag-Pt (9:1), and Au0 are significantly higher than the corresponding rate constants for BH4- hydrolysis, suggesting that most reductions do not proceed through surface-adsorbed hydrogen atoms, as observed for Pt0 nanoparticles. This research emphasizes the conflicting nature of BH4- hydrolysis and reduction processes, provides insights for designing improved catalysts for competitive reactions, and sheds light on the catalyst properties required for each specific process.

Recent Advances and Perspectives on Supported Catalysts for Heterogeneous Hydrogen Production from Ammonia Borane

Ammonia borane (AB), a liquid hydrogen storage material, has attracted increasing attention for hydrogen utilization because of its high hydrogen content. However, the slow kinetics of AB hydrolysis and the indefinite catalytic mechanism remain significant problems for its large-scale practical application. Thus, the development of efficient AB hydrolysis catalysts and the determination of their catalytic mechanisms are significant and urgent. A summary of the preparation process and structural characteristics of various supported catalysts is presented in this paper, including graphite, metal-organic frameworks (MOFs), metal oxides, carbon nitride (CN), molybdenum carbide (MoC), carbon nanotubes (CNTs), boron nitride (h-BN), zeolites, carbon dots (CDs), and metal carbide and nitride (MXene). In addition, the relationship between the electronic structure and catalytic performance is discussed to ascertain the actual active sites in the catalytic process. The mechanism of AB hydrolysis catalysis is systematically discussed, and possible catalytic paths are summarized to provide theoretical considerations for the designing of efficient AB hydrolysis catalysts. Furthermore, three methods for stimulating AB from dehydrogenation by-products and the design of possible hydrogen product-regeneration systems are summarized. Finally, the remaining challenges and future research directions for the effective development of AB catalysts are discussed.

An environmental approach for the photodegradation of toxic pollutants from wastewater using Pt-Pd nanoparticles: Antioxidant, antibacterial and lipid peroxidation inhibition applications

BACKGROUND

Green synthesis is an effective and friendly method for the environment, especially in recent years has been used in many areas. It finds application opportunities in many fields such as physics, chemistry, electronics, food, and especially health and is the subject of intensive studies in this field.

OBJECTIVES

The synthesized Pt-Pd NPs were aimed to be used as a bio-based photocatalyst under sunlight to prevent wastewater pollution. In addition, it is aimed to use Pt-Pd NPs as biological agents in different applications in the future.

METHODS

In this study, the platinum-palladium nanoparticles were synthesized by the extract of Hibiscus sabdariffa, the characterization of the nanoparticles was carried out by different methods (ultraviolet-visible spectroscopy (UV-vis), transmission electron microscopy (TEM), infrared transform spectroscopy atomic force microscopy (AFM), and ray diffraction (XRD) analysis). And we discussed several different parameters related to human health by obtaining platinum-palladium bimetallic nanoparticles (Pt-Pd NPs) with a green synthesis method. These parameters are antioxidant properties (total phenolic, flavonoid, and DPPH scavenging activity), antibacterial activity, and lipid peroxidation inhibition activity. Gallic acid was used as standard phenolic, and quercetin was used as standard flavonoid reagents. The newly synthesized Hibiscus sabdariffa mediated green synthesized Pt-Pd NPs were compared with gram-positive and gram-negative bacteria, the high antibacterial activity was shown by gram-positive bacteria. The photodegradation of Pt-Pd NPs was carried out against MB dye for 180 min.

RESULTS

TEM results show that the average size of Pt-Pd NPs is around 4.40 nm. The total amount of phenolic compounds contained in 0.2 mg/ml of Pt-Pd NPs was equivalent to 14.962 ± 7.890 μg/ml gallic acid and the total amount of flavonoid component was found to be equal to 28.9986 ± 0.204 μg/ml quercetin. Hibiscus sabdariffa mediated green synthesized Pt-Pd NPs was found to have very effective for lipid peroxidation inhibition activity in the FeCl2-H2O2 system. The maximum DPPH scavenging activity was determined as 97.35% at 200 μg/ml. The photocatalytic activity of Pt-Pd NPs was analysed against Methylene blue (MB) and the maximum degradation percentage was observed to be 83.46% at 180 min.

CONCLUSIONS

The biogenic Pt-Pd NPs showed a high effective photocatalytic and biological activity.

Hybrid Plasmonic Nanomaterials for Hydrogen Generation and Carbon Dioxide Reduction

The successful development of artificial photosynthesis requires finding new materials able to efficiently harvest sunlight and catalyze hydrogen generation and carbon dioxide reduction reactions. Plasmonic nanoparticles are promising candidates for these tasks, due to their ability to confine solar energy into molecular regions. Here, we review recent developments in hybrid plasmonic photocatalysis, including the combination of plasmonic nanomaterials with catalytic metals, semiconductors, perovskites, 2D materials, metal-organic frameworks, and electrochemical cells. We perform a quantitative comparison of the demonstrated activity and selectivity of these materials for solar fuel generation in the liquid phase. In this way, we critically assess the state-of-the-art of hybrid plasmonic photocatalysts for solar fuel production, allowing its benchmarking against other existing heterogeneous catalysts. Our analysis allows the identification of the best performing plasmonic systems, useful to design a new generation of plasmonic catalysts.

Low-temperature and gram-scale synthesis of chemically stable covalent organic frameworks in an aqueous medium

A facile and green scalable approach for production of chemically stable covalent organic frameworks (COFs) in aqueous medium at room temperature was reported by exploring an ionic liquid ([Bmim][N(CN)2) as the superior catalyst.

Efficient Near-Infrared-Activated Photocatalytic Hydrogen Evolution from Ammonia Borane with Core-Shell Upconversion-Semiconductor Hybrid Nanostructures

In this work, the photocatalytic hydrogen evolution from ammonia borane under near-infrared laser irradiation at ambient temperature was demonstrated by using the novel core-shell upconversion-semiconductor hybrid nanostructures (NaGdF4:Yb3+/Er3+@NaGdF4@Cu2O). The particles were successfully synthesized in a final concentration of 10 mg/mL. The particles were characterized via high resolution transmission electron microscopy (HRTEM), photoluminescence, energy dispersive X-ray analysis (EDAX), and powder X-ray diffraction. The near-infrared-driven photocatalytic activities of such hybrid nanoparticles are remarkably higher than that with bare upconversion nanoparticles (UCNPs) under the same irradiation. The upconverted photoluminescence of UCNPs efficiently reabsorbed by Cu2O promotes the charge separation in the semiconducting shell, and facilitates the formation of photoinduced electrons and hydroxyl radicals generated via the reaction between H2O and holes. Both serve as reactive species on the dissociation of the weak B-N bond in an aqueous medium, to produce hydrogen under near-infrared excitation, resulting in enhanced photocatalytic activities. The photocatalyst of NaGdF4:Yb3+/Er3+@NaGdF4@Cu2O (UCNPs@Cu2O) suffered no loss of efficacy after several cycles. This work sheds light on the rational design of near-infrared-activated photocatalysts, and can be used as a proof-of-concept for on-board hydrogen generation from ammonia borane under near-infrared illumination, with the aim of green energy suppliers.

Rhodium nanoparticles confined in titania nanotubes for efficient Hydrogen evolution from Ammonia Borane

Designing efficient catalysts for hydrogen evolution from hydrolysis of ammonia borane (AB) have attracted considerable attention. Rhodium (Rh) based catalysts with rational design present remarkable catalytic performance for the reaction. Herein, we report the confined Rh@TiO₂ catalysts synthesized by atomic layer deposition combining with the sacrificial template approach, in which the Rh nanoparticles are uniformly confined on the inner surface of the porous titania nanotubes. The optimized catalysts show high catalytic activity with a turnover frequency value of 334.1 mol_H2·mol_Rh^-1·min^-1 and better durability. Mechanistic investigation demonstrates that the cleavage of OH bands in water should be the rate determining step, and the appropriate concentration of NaOH can further enhance the hydrogen evolution activity. The catalysts can also achieve the hydrogenation of various organic substrates using AB as the hydrogen source. In addition, our present strategy is general and can be extended to the synthesis of other confined catalysts for various catalytic reactions.

A PdMo bimetallene with precise wavelength adjustment and catalysis for synergistic photothermal ablation and hydrogen therapy of cancer at different depths

By delivering the idea of green and safe hydrogen energy and novel photothermal therapy to the biomedical field, engineering of therapeutic nanomaterials for treatment of major diseases (such as cancer) holds great significance. In this work, a novel PdMo bimetallene was synthesized by a solvothermal reduction method, and it was explored and applied in the field of anti-tumor therapy for the first time. The absorption peak of the PdMo bimetallene can be precisely adjusted in the NIR biological window (700-1350 nm) only by changing the synthesis time. At the same time, it also shows strong light absorption and high photothermal conversion efficiency. Specifically, the photothermal conversion efficiencies at 808 nm, 980 nm and 1064 nm are 43.1%, 51.7% and 69.15%, respectively. Surprisingly, a PdMo bimetallene is an efficient catalyst, which can effectively promote hydrogen production from the hydrolysis of ammonia borane (AB) under acidic and photothermal conditions. Benefitting from these excellent properties, a multifunctional composite nano therapeutic agent (PdMo@AB@HA) was developed via layer-by-layer surface modification with AB and hyaluronic acid (HA). In this way, the synergistic PTT/hydrogen therapy of PdMo@AB@HA composite nanosheets in the NIR-I and NIR-II windows (808 nm, 980 nm, and 1064 nm) on mouse tumor xenografts of different depths was realized. Furthermore, the controlled release of hydrogen, targeted endocytosis, efficient eradication of tumors of different depths and high biosafety were systematically proved in vitro and in vivo. This work not only provides a novel and efficient theranostic nanoplatform for efficient cancer theranostics, but also provides a new strategy for the development of safe and efficient new anti-tumor therapies.

The Ionic Liquid-H2O Interface: A New Platform for the Synthesis of Highly Crystalline and Molecular Sieving Covalent Organic Framework Membranes

Covalent organic frameworks (COFs) are highly porous crystalline polymers with uniform pores and large surface areas. Combined with their modular design principle and excellent properties, COFs are an ideal candidate for separation membranes. Liquid-liquid interfacial polymerization is a well-known approach to synthesize membranes by reacting two monomers at the interface. However, volatile organic solvents are usually used, which may disturb the liquid-liquid interface and affect the COF membrane crystallinity due to solvent evaporation. Simultaneously, the domain size of the organic solvent-water interface, named the reaction zone, can hardly be regulated, and the diffusion control of monomers for favorable crystallinity is only achieved in the water phase. These drawbacks may limit the widespread applications of liquid-liquid interfacial polymerization to synthesize diverse COF membranes with different functionalities. Here, we report a facile strategy to synthesize a series of imine-linked freestanding COF membranes with different thicknesses and morphologies at tunable ionic liquid (IL)-H₂O interfaces. Due to the H-bonding of the catalysts with amine monomers and the high viscosity of the ILs, the diffusion of the monomers was simultaneously controlled in water and in ILs. This resulted in the exceptionally high crystallinity of freestanding COF membranes with a Brunauer-Emmett-Teller (BET) surface area up to 4.3 times of that synthesized at a dichloromethane-H₂O interface. By varying the alkyl chain length of cations in the ILs, the interfacial region size and interfacial tension could be regulated to further improve the crystallinity of the COF membranes. As a result, the as-fabricated COF membranes exhibited ultrahigh permeance toward water and organic solvents and excellent selective rejection of dyes.

A review on platinum(0) nanocatalysts for hydrogen generation from the hydrolysis of ammonia borane

This review reports a survey on the progress in developing highly efficient platinum nanocatalysts for the hydrolytic dehydrogenation of ammonia borane (AB). After a short prelude emphasizing the importance of increasing the atom efficiency of high cost, precious platinum nanoparticles (NPs) which are known to be one of the highest activity catalysts for hydrogen generation from the hydrolysis of AB, this article reviews all the available reports on the use of platinum-based catalysts for this hydrolysis reaction covering (i) early tested platinum catalysts, (ii) platinum(0) NPs supported on oxides, (iii) platinum(0) NPs supported on carbonaceous materials, (iv) supported platinum single-atom catalysts, (v) bimetallic- and (vi) multimetallic-platinum NP nanocatalysts, and (vii) magnetically separable platinum-based catalysts. All the reported results are tabulated along with the important parameters used in the platinum-catalyzed hydrolysis of AB. In the section "Concluding remarks and a look towards the future" a discussion is devoted to the approaches for making high cost, precious platinum catalysts as efficient as possible, ultimately lowering the cost, including the suggestions for the future research in this field.

Adsorption and Purification of Baicalin from Scutellaria baicalensis Georgi Extract by Ionic Liquids (ILs) Grafted Silica

Baicalin which has multiple biological activities is the main active component of the root of Scutellaria baicalensis Georgi (SBG). Although its isolation and purification by adsorption methods have aroused much interest of the scientific community, it suffered from the poor selectivity of the adsorbents. In this work, an environmentally benign method was developed to prepare ionic liquids (ILs) grafted silica by using IL 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₄mim]NTf₂) and ethanol as reaction media. The IL 1-propyl-3-methylimidazolium chloride ([C₃mim]Cl) grafted silica ([C₃mim]⁺Cl⁻@SiO₂) was used to adsorb and purify baicalin from the root extract of Scutellaria baicalensis Georgi (SBG). Experimental results indicated that the adsorption equilibrium can be quickly achieved (within 10 min). The adsorption behavior of [C₃mim]⁺Cl⁻@SiO₂ for baicalin was in good agreement with Langmuir and Freundlich models and the adsorption was a physisorption process as suggested by Dubinin–Radushkevich model. Compared with commercial resins, [C₃mim]⁺Cl⁻@SiO₂ showed the strongest adsorption ability and highest selectivity. After desorption and crystallization, a purity of baicalin as high as 96.5% could be obtained. These results indicated that the ILs grafted silica materials were promising adsorbents for the adsorption and purification of baicalin and showed huge potential in the purification of other bioactive compounds from natural sources.

Recent developments of nanocatalyzed liquid-phase hydrogen generation

Hydrogen is the most effective and sustainable carrier of clean energy, and liquid-phase hydrogen storage materials with high hydrogen content, reversibility and good dehydrogenation kinetics are promising in view of "hydrogen economy". Efficient, low-cost, safe and selective hydrogen generation from chemical storage materials remains challenging, however. In this Review article, an overview of the recent achievements is provided, addressing the topic of nanocatalysis of hydrogen production from liquid-phase hydrogen storage materials including metal-boron hydrides, borane-nitrogen compounds, and liquid organic hydrides. The state-of-the-art catalysts range from high-performance nanocatalysts based on noble and non-noble metal nanoparticles (NPs) to emerging single-atom catalysts. Key aspects that are discussed include insights into the dehydrogenation mechanisms, regenerations from the spent liquid chemical hydrides, and tandem reactions using the in situ generated hydrogen. Finally, challenges, perspectives, and research directions for this area are envisaged.

Visible-Light Acceleration of H2 Evolution from Aqueous Solutions of Inorganic Hydrides Catalyzed by Gold-Transition-Metal Nanoalloys

Production of hydrogen (H₂) upon hydrolysis of inorganic hydrides potentially is a key step in green energy production. We find that visible-light irradiation of aqueous solutions of ammonia-borane (AB) or NaBH₄ containing "click"-dendrimer-stabilized alloyed nanocatalysts composed of nanogold and another late transition-metal nanoparticle (LTMNP) highly enhances catalytic activity for H₂ generation while also inducing alloy to Au core@M shell nanocatalyst restructuration. In terms of visible-light-induced acceleration of H₂ production from both AB and NaBH₄, the Au₁Ru₁ alloy catalysts show the most significant light-boosting effect. Au-Rh and Au-PtNPs are also remarkable with total H₂ release time from AB and NaBH₄ down to 1.3 min at 25 °C (AuRh), 3 times less than in the dark, and Co is the best earth-abundant metal alloyed with nanogold. This boosting effect is explained by the transfer of plasmon-induced hot electron from the Au atoms to the LTMNP atoms facilitating water O-H oxidative addition on the LTMNP surface, as shown by the large primary kinetic isotope effect k_H/k_D upon using D₂O obtained for both AB and NaBH₄. The second simultaneous and progressive effect of visible-light irradiation during these reactions, alloy to Au core@M shell restructuration, enhances the catalytic activity in the recycling, because, in the resulting Au core@M shell, the surface metal (such as Ru) is much more active than the original Au-containing alloy surface in dark reactions. There is no light effect on the rate of hydrogen production for the recycled nanocatalyst because of the absence of Au on the NP surface, but it is still very efficient in hydrogen release during four cycles because of the initial light-induced restructuration, although it is slightly less efficient than the original nanoalloy in the presence of light. The dendritic triazole coordination on each LTMNP surface appears to play a key role in these remarkable light-induced processes.

Recent Advances in Noble Metal Catalysts for Hydrogen Production from Ammonia Borane

Interest in chemical hydrogen storage has increased, because the supply of fossil fuels are limited and the harmful effects of burning fossil fuels on the environment have become a focus of public concern. Hydrogen, as one of the energy carriers, is useful for the sustainable development. However, it is widely known that controlled storage and release of hydrogen are the biggest barriers in large-scale application of hydrogen energy. Ammonia borane (NH3BH3, AB) is deemed as one of the most promising hydrogen storage candidates on account of its high hydrogen to mass ratio and environmental benignity. Development of efficient catalysts to further improve the properties of chemical kinetics in the dehydrogenation of AB under appropriate conditions is of importance for the practical application of this system. In previous studies, a variety of noble metal catalysts and their supported metal catalysts (Pt, Pd, Au, Rh, etc.) have presented great properties in decomposing the chemical hydride to generate hydrogen, thus, promoting their application in dehydrogenation of AB is urgent. We analyzed the hydrolysis of AB from the mechanism of hydrogen release reaction to understand more deeply. Based on these characteristics, we aimed to summarize recent advances in the development of noble metal catalysts, which had excellent activity and stability for AB dehydrogenation, with prospect towards realization of efficient noble metal catalysts.

TiN nanotube supported Ni catalyst Ni@TiN-NTs: experimental evidence of structure–activity relations in catalytically hydrolyzing ammonia borane for hydrogen evolution

With commercial TiO₂ as the precursor, titanium nitride nanotubes (TiN-NTs) were fabricated through a hydrothermal – ammonia nitriding route, and next non-noble metal nanosized Ni particles were evenly and firmly anchored on the surface of the TiN-NTs via a PVP-mediated non-aqueous phase reduction–deposition strategy, to obtain the supported catalyst Ni@TiN-NTs. The X-ray powder diffraction (PXRD), field emission scanning and transmission electron microscopy (FE-SEM/TEM) and specific surface area measurements were used to characterize and analyze the phase composition, surface microstructure and morphological features of the product. The catalytic activity of the Ni@TiN-NTs for hydrolyzing ammonia borane to generate hydrogen (H₂) under different conditions was evaluated systematically. The results reveal that the as-fabricated TiN-NTs are composed of TiN and a small amount of TiN_xO_y with the approximate molar atomic ratio of Ti to N at 1 : 1, existing as hollow microtubules with mean tube diameter of 130 nm and length of about 1 μm. Via in situ reduction and deposition, Ni nanoparticles can be uniformly anchored on the surface of TiN-NTs. The catalytic activities of Ni(x)@TiN-NTs with different Ni loading amounts are all higher than that of single metal Ni nanoparticles. The temperature has a positive effect on the catalytic activity of Ni(20)@TiN-NTs, and its total turnover frequency for hydrolyzing ammonia borane is 11.73 mol(H₂) (mol Ni)⁻¹ min⁻¹, with an apparent activation energy of 52.05 kJ mol⁻¹ at 303 K. After 5 cycles, the Ni(20)@TiN-NTs catalyst still maintains 87% of the initial catalytic activity. It could be suggested that these tactics can also be extended to the fabrication of other metal or alloy catalysts supported by TiN-NTs, with great application potential and development prospects.

Titanium nitride nanotubes (TiN-NTs) were fabricated using a hydrothermal – ammonia nitriding route, and non-noble metal nanosized Ni particles were anchored on the surface via a non-aqueous phase reduction–deposition strategy, to obtain the supported catalyst Ni@TiN-NTs.

Ionic Liquid-Modulated Synthesis of Porous Worm-Like Gold with Strong SERS Response and Superior Catalytic Activities

Porous gold with well-defined shape and size have aroused extensive research enthusiasm due to their prominent properties in various applications. However, it is still a great challenge to explore a simple, green, and low-cost route to fabricate porous gold with a “clean” surface. In this work, porous worm-like Au has been easily synthesized in a one-step procedure from aqueous solution at room temperature under the action of ionic liquid tetrapropylammonium glycine ([N₃₃₃₃][Gly]). It is shown that the as-prepared porous worm-like Au has the length from 0.3 to 0.6 μm and the width of approximately 100–150 nm, and it is composed of lots of small nanoparticles about 6–12 nm in diameter. With rhodamine 6G (R6G) as a probe molecule, porous worm-like Au displays remarkable surface enhanced Raman scattering (SERS) sensitivity (detection limit is lower than 10⁻¹³ M), and extremely high reproducibility (average relative standard deviations is less than 2%). At the same time, owing to significantly high specific surface area, various pore sizes and plenty of crystal defects, porous worm-like Au also exhibits excellent catalytic performance in the reduction of nitroaromatics, such as p-nitrophenol and p-nitroaniline, which can be completely converted within only 100 s and 150 s, respectively. It is expected that the as-prepared porous worm-like Au with porous and self-supported structures will also present the encouraging advances in electrocatalysis, sensing, and many others.