Macroscopic two-dimensional monolayer films of gold nanoparticles: fabrication strategies, surface engineering and functional applications

Mechanistic understanding of nanoparticle interactions to achieve highly-ordered arrays through self-assembly for sensitive surface-enhanced Raman scattering detection of trace thiram

Over the last few decades, there is increasing worldwide concern over human health risks associated with extensive use of pesticides in agriculture. Developing excellent SERS substrate materials to achieve highly sensitive detection of pesticide residues in the food is very necessary owing to their serious threat to human health through food chains. Self-assembled metallic nanoparticles have been demonstrated to be excellent SERS substrate materials. Hence, alkanethiols-protected gold nanoparticles have been successfully prepared for forming larger-scale two-dimensional monolayer films. These films can be disassembled into a fluid state and re-assembled back to crystallized structure by controlling surface pressure. Further investigations reveal that their self-assembled structures are mainly dependent on the diameter of gold nanoparticles and ligand length. These results suggest that the size ratio of nanoparticle diameter/ligand length within the range of 4.45-2.35 facilitates the formation of highly ordered 2D arrays. Furthermore, these arrays present excellent Surface-Enhanced Raman Scattering performances in the detection of trace thiram, which can cause environmental toxicity to the soil, water, animals and result in severe damage to human health. Therefore, the current study provides an effective way for preparing monodispersed hydrophobic gold nanoparticles and forming highly ordered 2D close-packed SERS substrate materials via self-assembly to detect pesticide residues in food. We believe that, our research provides not only advanced SERS substrate materials for excellent detection performance of thiram in food, but also novel fundamental understandings of self-assembly, manipulation of nanoparticle interactions, and controllable synthesis.

Salt-Assisted, In Situ Current Nanowelding of an Interfacial Au Nanoparticle Film for a High-Performance Electrocatalyst

Interfacial self-assembly is a well-established method for the preparation of a two-dimensional (2D) metal nanofilm from nanoscale building blocks. However, the as-prepared nanofilm exhibits limited conductivity because of the large contact resistance at the junctions among its building blocks. Here, we report a salt-assisted, in situ current nanowelding strategy to weld an interfacial Au nanoparticle (NP) film for downstream applications, such as high-performance electrocatalysts. Particularly, we found that salt-assisted interfacial assembly can reduce the size of the nanogaps among neighboring Au NPs and, in turn, greatly improve the conductivity of the resultant Au NP film. Consequently, the Au NP film can be readily welded using current, and the welding extent can be monitored in real-time by looking at the passing current. The welding finally produces a nanoporous Au film (NPGF) with a network nanostructure, high conductivity, and abundant active sites so that it delivers a large current density of 86.96 μA·cm-2 (1.81 times higher than that from the pristine Au NP film) and shows improved cycling stability for methanol electrooxidation. Thus, these results offer a low-cost, solution-processable approach for the fabrication of a large-area, interconnected nanofilm from nanoscale building blocks beyond Au NPs, which may find diverse downstream applications.

Interfacing Langmuir-Blodgett and Pickering Emulsions for the Synthesis of 2D Nanostructured Films: Applications in Copper Ion Adsorption

This research focuses on developing a 2D thin film comprising a monolayer of silica nanoparticles functionalized with polyethyleneimine (PEI), achieved through a novel integration of Langmuir-Blodgett (L-B) and Pickering emulsion techniques. The primary aim was to create a nanostructured film that exhibits dual functionality: iridescence and efficient metal ion adsorption, specifically Cu(II) ions. The methodology combined L-B and Pickering emulsion polymerization to assemble and stabilize a nanoparticle monolayer at an oil/water interface, which was then polymerized under UV radiation to form an asymmetrically structured film. The results demonstrate that the film possesses a high adsorption efficiency for Cu(II) ions, with the enhanced mechanical durability provided by a reinforcing layer of polyvinyl alcohol/glycerol. The advantage of combining L-B and Pickering emulsion technology is the ability to generate 2D films from functional nanoparticle monolayers that are sufficiently sturdy to be deployed in applications. The 2D film's practical applications in environmental remediation were confirmed through its ability to adsorb and recover Cu(II) ions from aqueous solutions effectively. We thus demonstrate the film's potential as a versatile tool in water treatment applications owing to its combined photonic and adsorptive properties. This work paves the way for future research on the use of nanoengineered films in environmental and possibly photonic applications focusing on enhancing the film's structural robustness and exploring its broader applicability to other pollutants and metal ions.

3D hotspot engineering and analytes strategy enabled ultrasensitive SERS platform for biosensing of depression biomarker

Nowadays, the diagnose of depression mainly relies on clinical examination while impossible to accurately evaluate the occurrence of depression. Chemical approaches are captivating to analyze stress biomarkers for feedbacking body's endocrine response to stress stimuli. However, it remains challenging in exploring accurate, reliable and sensitive approaches. Herein, we rationally design a newly SERS platform with integrated hotspots engineering and analyte strategy to achieve highly sensitive analysis for estrogen, a typical depression biomarker in adolescent female. On the one hand, the 3D micro/nano plasmonic substrate containing Au-Ag Alloy Nanourchins (AAA-NUs) and arrays-based monolayer films of Au nanoparticles (Au NSs) was constructed to achieve high density and availability of hotspots. On the other hand, the analyte strategy was designed via rapid azotizing reaction to further enhance the scattering cross-section of estrogen in the form of azido compounds. With the synergism of them, the proposed SERS platform displayed high sensitivity for estrogen with a limit of detection down to 10-11 mg/mL. More importantly, the blood estrogen levels of depressed patients were evaluated via the proposed SERS platform and presented high consistence with clinical diagnostic results. This integrated SERS platform paves the way for universal and ultrasensitive biosensing and possess great potential for applying in multi-target detection and disease prediction.

"On-site" analysis of pesticide residues in complex sample matrix by plasmonic SERS nanostructure hybridized hydrogel

BACKGROUND

Surface-enhanced Raman spectroscopy (SERS) has been extensively used in biomedical and food safety detection due to its advantages of label-free, in situ and fingerprint spectrum. However, it is challenging to develop an excellent SERS substrate that possesses all three of these characteristics including sensitivity, repeatability and stability.

RESULTS

In this work, a specific sodium alginate hydrogel flexible SERS substrate encapsulated gold-silver core-shell nanoparticles (Au@Ag NPs) was developed to address the aforementioned issue. The Au@Ag NPs with SERS "hot spot" structure were evenly dispersed in the hydrogel, which achieved the direct and high efficiency detection of the pesticide residues from complex sample matrix. Taking thiram as objective, this SERS substrates exhibit high sensitivity (detection limit of approximately 1 × 10-10 mol/L), excellent stability (maintain above 78.35 % of SERS activity after 7 weeks) and outstanding repeatability (RSD in one substrate as low as 3.56 %). Furthermore, the flexible hydrogel SERS substrates can be used to analyze a variety of small molecules in real samples (juices, vegetables and fruits), without the need for a laborious pretreatment process.

SIGNIFICANCE

In light of the aforementioned benefits, the functional flexible hydrogel SERS substrates present a reliable platform for the accurate and on-site measurement of chemical contaminants from complex samples.

Chemical and Physical Properties of Photonic Noble-Metal Nanomaterials

Colloidal noble metal nanoparticles (NPs) are composed of metal cores and organic or inorganic ligand shells. These NPs support size- and shape-dependent plasmonic resonances. They can be assembled from dispersions into artificial metamolecules which have collective plasmonic resonances originating from coupled bright and dark optical electric and magnetic modes that form depending on the size and shape of the constituent NPs and their number, arrangement, and interparticle distance. NPs can also be assembled into extended 2D and 3D metamaterials that are glassy thin films or ordered thin films or crystals, also known as superlattices and supercrystals. The metamaterials have tunable optical properties that depend on the size, shape, and composition of the NPs, and on the number of NP layers and their interparticle distance. Interestingly, strong light-matter interactions in superlattices form plasmon polaritons. Tunable interparticle distances allow designer materials with dielectric functions tailorable from that characteristic of an insulator to that of a metal, and serve as strong optical absorbers or scatterers, respectively. In combination with lithography techniques, these extended assemblies can be patterned to create subwavelength NP superstructures and form large-area 2D and 3D metamaterials that manipulate the amplitude, phase, and polarization of transmitted or reflected light.

Enhanced charge transport across molecule-nanoparticle-molecule sandwiches

The electrical properties of large area molecular devices consisting of gold nanoparticles (GNPs) sandwiched between a double layer of alkanedithiol linkers have been examined. These devices have been fabricated by a facile bottom-up assembly in which an alkanedithiol monolayer is first self-assembled on an underlying gold substrate followed by nanoparticle adsorption and then finally assembly of the top alkanedithiol layer. These devices are then sandwiched between the bottom gold substrates and a top eGaIn probe contact and current-voltage (I-V) curves recorded. Devices have been fabricated with 1,5-pentanedithiol, 1,6-hexanedithiol, 1,8-octanedithiol and 1,10-decanedithiol linkers. In all cases the electrical conductance of the double SAM junctions with GNPs is higher than the corresponding and much thinner single alkanedithiol SAM. Competing models for this enhanced conductance are discussed and it is suggested to have a topological origin arising from how the devices assemble or structure during the fabrication, which gives more efficient cross device electron transport pathways without the GNPs producing short circuits.

In Situ Self-Assembly of Nanoscale Particles into Macroscale Ordered Monolayers with Enhanced Memory Performance

In situ fabrication of macroscale ordered monolayers of nanoparticles (NPs) on targeted substrates is highly desirable for precision electronic and optical devices, while it remains a great challenge. In this study, a solution is provided to address this challenge by developing a colloidal ink formulation and employing the direct-ink-writing (DIW) technique, where on-demand delivery of ink at a targeted location and directional evaporation with controllable rate are leveraged to precisely guide the deposition of polystyrene-grafted gold NPs (Au@PS NPs) into a macroscale monolayer with an ordered Au NP array embedded in a PS thin film. A 2D steady-state diffusion-controlled evaporation model, which explains the parameter dependence of the experimental results and gives semiquantitative agreement with the experimental evaporation kinetics is proposed. The ordered monolayer is used as both nanocrystal floating gates and the tunneling layer for nonvolatile memory devices. It shows significantly enhanced performance compared with a disordered NP film prepared by spin coating. This approach allows for fine control of NP self-assembly to print macroscaleordered monolayers directly onto substrates, which has great promise for application in broad fields, including microelectronic and photoelectronic devices, sensors, and functional coatings.

Silver Nanocrystal Array with Precise Control via Star-like Copolymer Nanoreactors

Silver nanocrystal arrays had attracted much attention due to the unique plasmonic effect of their ordered nanostructure and the synergy among adjacent nanocrystals. Conventional preparation methods had several limitations, such as high cost, harsh preparation conditions, and complicated influencing factors, which could not be employed to fabricate the nanocrystal arrays in highly controlled fashion. To solve these issues, we reported ordered arrays of different Ag nanocrystals with precise control prepared by utilizing amphiphilic star-like poly(4-vinylpyridine)-block-polystyrene diblock copolymers as nanoreactors synthesized by sequential atom transfer radical polymerization. Moreover, this unimolecular nanoreactor method based on star-like copolymers with stable and predesigned nanostructures was proved to be a universal approach to prepare other nanocrystal arrays. This strategy had low cost, simple process flow, wide applicability, and structural stability that could fabricate nanocrystal array with precise control and continuously prepare more complex nanostructure units in a large scale to meet different functions and applications.

Plasmon-Tuned Particles for the Amplification of Surface-Enhanced Raman Scattering from Analytes

Inelastic scattering from molecules because of vibrational modes produces unique Raman shifts, allowing these analytes to be detected with high specificity. Because Raman scattering is weak, surface-enhanced Raman scattering (SERS) has been used as a label-free technique for the detection of a variety of analytes at low concentrations. Using simple solution-based colloidal processing techniques, we have fabricated gold-coated carbon-black nanoparticles that show enhanced Raman activity. By varying the fabrication conditions, we create particles of different surface morphologies, allowing control over the peak wavelength for localized surface plasmon resonance (LSPR). By matching the LSPR wavelength to the incident laser wavelength, we get the highest signal from two model analytes, 4-nitrobenzenethiol (4-NBT) and Congo Red (CR). Our straightforward room-temperature-solution-based approach for making tunable SERS-active particles expands the range of incident radiation wavelengths that can be used for the detection of analytes using Raman scattering.

Ultrasensitive Sandwich-Type SERS-Biosensor-Based Dual Plasmonic Superstructure for Detection of Tacrolimus in Patients

Tacrolimus (FK506) is widely used in the prevention of organ transplant rejection and the treatment of autoimmune diseases, but it is difficult to detect within the low and narrow concentration range in practical clinical fields. A magnetic plasmonic superstructure-targets-plasmonic superstructure-based sandwich-type SERS biosensor is presented here to ultrasensitively detect FK506 in the blood of organ transplant patients. The spiky Fe₃O₄@SiO₂@Ag flower magnetic superstructure and hollow Ag@Au superstructure enhanced the SERS signals by providing rich sharp tips, cavities, and abundant hot spot gaps. And the magnetic feature makes it easy to concentrate and separate the biological target. Using the designed sandwich-type SERS biosensor, FK506 could be detected within a range of 0.5-20 ng/mL with a detection limit of 0.33 ng/mL. All results indicated that the sandwich-type SERS biosensor has good stability, sensitivity, and anti-interference properties. It is noteworthy that this allowed us to successfully analyze FK506 in the blood of transplant patients, which is in strong agreement with the clinical results. Consequently, the attractive sandwich-type SERS biosensor can be used for the detection of FK506 in real samples, which is promising for clinical diagnosis.

Thermal-annealing-regulated plasmonic enhanced fluorescence platform enables accurate detection of antigen/antibody against infectious diseases

Plasmonic enhanced fluorescence (PEF) technology is a powerful strategy to improve the sensitivity of immunofluorescence microarrays (IFMA), however, current approaches to constructing PEF platforms are either expensive/time-consuming or reliant on specialized instruments. Here, we develop a completely alternative approach relying on a two-step protocol that includes the self-assembly of gold nanoparticles (GNPs) at the water-oil interface and subsequent annealing-assisted regulation of gold nanogap. Our optimized thermal-annealing GNPs (TA-GNP) platform generates adequate hot spots, and thus produces high-density electromagnetic coupling, eventually enabling 240-fold fluorescence enhancement of probed dyes in the near-infrared region. For clinical detection of human samples, TA-GNP provides super-high sensitivity and low detection limits for both hepatitis B surface antigen and SARS-CoV-2 binding antibody, coupled with a much-improved detection dynamic range up to six orders of magnitude. With fast detection, high sensitivity, and low detection limit, TA-GNP could not only substantially improve the outcomes of IFMA-based precision medicine but also find applications in fields of proteomic research and clinical pathology.

ELECTRONIC SUPPLEMENTARY MATERIAL

Supplementary material (UV-Vis absorption and transmission spectra of GNPs, SEM, microscopy and digital images of PEF platforms, and fluorescence images of IFMA on PEF platforms) is available in the online version of this article at 10.1007/s12274-022-5035-6.

Large emergent optoelectronic enhancement in molecularly cross-linked gold nanoparticle nanosheets

A central goal in molecular electronics and optoelectronics is to translate tailorable molecular properties to larger materials and to the device level. Here, we present a method to fabricate molecularly cross-linked, self-assembled 2D nanoparticle sheets (X-NS). Our method extends a Langmuir approach of self-assembling gold nanoparticle (NP) arrays at an air-water interface by replacing the liquid sub-phase to an organic solvent to enable cross-linking with organic molecules, and then draining the sub-phase to deposit films. Remarkably, X-NS comprising conjugated oligophenylene dithiol cross-linkers (HS-(C₆H₄)_n-SH, 1 ≤ n ≤ 3) exhibit increasing conductance with molecule length, ~6 orders of magnitude enhancement in UV-Vis extinction coefficients, and photoconductivity with molecule vs. NP contributions varying depending on the excitation wavelength. Finite difference time domain (FDTD) analyses and control measurements indicate that these effects can be modeled provided the local complex dielectric constant is strongly modified upon cross-linking. This suggests quantum hybridization at a molecule-band (q-MB) level. Given the vast number of molecules and nano-building blocks available, X-NS have potential to significantly increase the range of available 2D nanosheets and associated quantum properties.

Self-assembly of anisotropy gold nanocubes into large area two-dimensional monolayer superlattices

The spontaneous self-assembly of metal nanocrystals into two-dimensional (2D) monolayer superlattices with highly ordered symmetry and configuration paves the way towards the fabrication of functional materials. However, there remains great challenge for anisotropic nanocrystals to self-assembly into high quality superlattice because of the orientation and configuration consistency. Here, a facile yet universal solvent annealing driven 2D interfacial assembly of synthetic dried metal nanocrystals is firstly developed to realize the construction of the non-close-packing 2D monolayer gold nanocube (AuNC) superlattice with tunable interparticle distance and internal configurations (i.e. face-to-face and hexagonally-packed arrangement), which is achieved by precisely controlling molecular weight of polymer ligands tethered on AuNCs and the van der Waals forces between the adjacent AuNCs. In addition, the scale of the generated 2D monolayer AuNC superlattice with highly ordered internal arrangement and orientation can reach up to hundreds of micrometers, thus acquiring significant surface-enhanced Raman scattering performance of the large scale superlattice due to the strong plasma coupling effect. This strategy not only provides a robust route to fabricate nanocrystal superlattice structures but also offers a promising platform for preparing diverse functional materials with potential applications in electronics, photonics, detections, and others.

Gap controlled self-assembly Au@Ag@Au NPs for SERS assay of thiram

Thiram (TRM), one dithiocarbamate fungicide, is hazardous due to its ever-growing threat to our production and living. In order to detecting TRM more sensitively, a subtle surface-enhanced Raman scattering (SERS) substrate was reported to achieve TRM detection based on oil-water biphasic self-assembly interface of multi-interstitial Au@Ag@Au NPs crosslinking with 4,4' -Diamino-p-Terphenyl (DATP). This Au@Ag@Au@DATP array shows a noteworthy enhanced Raman signal and stability by controlling the inter-particle spacing of Au@Ag@Au NPs, which overcomes problems of traditional randomly self-assembly methods without cross linker. The Au@Ag@Au@DATP array attained the limit of detection (LOD) of 7.56 × 10^-3 ppb for TRM. In addition, this work gives a new approach for controlling gap of SERS hot spot, which have distinct potential in rapid assessment and identification of pesticides on foods.

Etched-spiky Au@Ag plasmonic-superstructure monolayer films for triple amplification of surface-enhanced Raman scattering signals

Generally, a high quality surface-enhanced Raman spectroscopy (SERS) substrate often requires a highly-tailorable electromagnetic (EM) field generated at nanoparticle (NP) surfaces by the regulation of the morphologies, components and roughness of NPs. However, most recent universal approaches are restricted to single components, and integrating these key factors into one system to achieve the theoretically maximum signal amplification is still challenging. Herein, we design a triple SERS signal amplification platform by the coordination of spiky Au NPs with rich-tip nanostructures, controllable silver nanoshell, as well as tailorable surface roughness into one nano-system. As a result, the theoretical electromagnetic field of the interfacial self-assembled 2D substrate can be improved by nearly 5 orders of magnitude, and the ideal tracing capability for the model SERS molecule can be achieved at levels of 5 × 10^-11 M. Finally, diverse analytes in pesticide residues, environmental pollutants as well as medically diagnose down to 10^-11 M and can be fingerprinted by the proposed SERS nano-platform. Our integrated triple amplification platform not only provides an effective SERS sensing strategy, but also makes it possible to simultaneously achieve high sensitivity, stability as well as universality into one plasmonic-based SERS sensing system.

Large-Area Monolayer Films of Hexagonal Close-Packed Au@Ag Nanoparticles as Substrates for SERS-Based Quantitative Determination

In this work, quasi-spherical, small-sized, citrate-stabilized, core-shell (CS)-structured Au_5.5@Ag_m nanoparticles (NPs) with Ag shells of controlled thicknesses (m = 0, 1.25, 3.25, and 5.25) were successfully synthesized by using Au NPs with sizes of 5.5 nm as seeds. The as-prepared Au@Ag NPs after the phase transfer process were further used for the fabrication of high-quality large-area monolayer films of hexagonal close-packed Au@Ag nanoparticles (LAMF-HCP-Au@Ag NPs) by our improved self-assembly at the interface of toluene-DEG containing a proper amount of water (10% v/v). Moreover, after transferring the as-prepared LAMF-HCP-Au@Ag NPs onto polydimethylsiloxane (PDMS) substrates (LAMF-HCP-Au@Ag NP@PDMS substrates), the resulting LAMF-HCP-Au@Ag NP@PDMS substrates can exhibit uniformity in the intensity of the surface-enhanced Raman scattering signals. Furthermore, taking LAMF-HCP-Au_5.5@Ag_5.25 NP@PDMS substrates as an example, they can achieve quantitative detection with high sensitivity for crystal violet (CV) and 4-aminothiophenol (4-ATP) in the range from 10^-12 to 10^-7 M and from 10^-13 to 10^-7 M, respectively. Also, their limit of detection (LOD) for CV and 4-ATP are 10^-12 and 10^-13 M, respectively. Especially, the LOD for CV can also be as low as 10^-13 M by extending the immersing time.

A Reversible Moisture-Responsive Plasmonic Color-Raman and Transmittance Modulation Device by Dispersing Hyaluronan-Functionalized Ag into Nanofibers

Plasmonic physical color generation, which mostly depends on selective absorption, creates unique colors by light transmission and scattering. Based on this, regulating plasmon and transparency with external stimulation is a promising approach for fabricating optical devices with enhanced visual displays; however, few studies have addressed the implementation of dual-optical modulation. In addition, developing a color response to environmental stimuli through the highly shape-sensitive plasmon depth modulation has long remained a significant challenge once the nanostructure is determined. Some stimulations also require high amounts of electricity, which can be costly. In this study, strategically designed hyaluronan-functionalized triangular silver nanoparticles (AgNPs) were embedded in polyvinyl alcohol-polyethylene nanofiber films to achieve a breakthrough in the moisture-responsive dual-optical modulation of the plasmonic color-Raman and transparency. Switchable colors that are reversible were induced in plasmon-resonance-modulation AgNPs via moisture stimulation, adjusting the expansion-tunable dielectric constant of hyaluronan-functionalized AgNPs and varying the electron density due to electron transfer. Furthermore, a moisture gradient was used to decrease the Raman scattering and increase the photoluminescence, which is a significant demonstration of smart-plasmonic evolution. This effect occurred due to the gradual transition from plasmon-driven photoluminescence quenching to photoluminescence enhancement as the interval of the Ag and hyaluronic acid molecules was increased. The transparency of the composite film was also dynamically regulated by turning moisture on/off. This occurred because of the significant difference in hygroscopic expansion between hyaluronan and the nanofibers, which generated a large variation in the total refractive index and caused changes in the surface roughness.

Flexible Plasmonic Biosensors for Healthcare Monitoring: Progress and Prospects

The noble metal nanoparticle has been widely utilized as a plasmonic unit to enhance biosensors, by leveraging its electric and/or optical properties. Integrated with the "flexible" feature, it further enables opportunities in developing healthcare products in a conformal and adaptive fashion, such as wrist pulse tracers, body temperature trackers, blood glucose monitors, etc. In this work, we present a holistic review of the recent advance of flexible plasmonic biosensors for the healthcare sector. The technical spectrum broadly covers the design and selection of a flexible substrate, the process to integrate flexible and plasmonic units, the exploration of different types of flexible plasmonic biosensors to monitor human temperature, blood glucose, ions, gas, and motion indicators, as well as their applications for surface-enhanced Raman scattering (SERS) and colorimetric detections. Their fundamental working principles and structural innovations are scoped and summarized. The challenges and prospects are articulated regarding the critical importance for continued progress of flexible plasmonic biosensors to improve living quality.

How gap distance between gold nanoparticles in dimers and trimers on metallic and non-metallic SERS substrates can impact signal enhancement

The impact of variation in the interparticle gaps in dimers and trimers of gold nanoparticles (AuNPs), modified with Raman reporter (2-MOTP), on surface-enhanced Raman scattering (SERS) intensity, relative to the SERS intensity of a single AuNP, is investigated in this paper. The dimers, trimers, and single particles are investigated on the surfaces of four substrates: gold (Au), aluminium (Al), silver (Ag) film, and silicon (Si) wafer. The interparticle distance between AuNPs was tuned by selecting mercaptocarboxylic acids of various carbon chain lengths when each acid forms a mixed SAM with 2-MOTP. The SERS signal quantification was accomplished by combining maps of SERS intensity from a Raman microscope, optical microscope images (×100), and maps/images from AFM or SEM. In total, we analysed 1224 SERS nanoantennas (533 dimers, 648 monomers, and 43 trimers). The average interparticle gaps were measured using TEM. We observed inverse exponential trends for the Raman intensity ratio and enhancement factor ratio versus gap distance on all substrates. Gold substrate, followed by silicon, showed the highest Raman intensity ratio (9) and dimer vs. monomer enhancement factor ratio (up to 4.5), in addition to the steepest inverse exponential curve. The results may help find a balance between SERS signal reproducibility and signal intensity that would be beneficial for future agglomerated NPs in SERS measurements. The developed method of 3 to 1 map combination by an increase in image transparency can be used to study structure-activity relationships on various substrates in situ, and it can be applied beyond SERS microscopy.

Laying down of gold nanorods monolayers on solid surfaces for surface enhanced Raman spectroscopy applications

Laying-down gold nanorods (GNRs) of a monolayer immobilized on a solid substrate was realized with a hybrid method, a combination of three elemental technologies: surface modification, electrophoresis, and solvent evaporation. The self-assembly of CTAB-protected GNRs in the solution was induced by 0.05 mM of EDTA. The assembled GNRs were deposited in a laying-down form on the solid surface during the hybrid method. The final coverage was over 71% on the substrate with an area larger than 0.6 cm². The spacing between the sides of the GNRs was fixed to be 4.6 ± 0.9 nm by the thermal annealing-promoted crystalline packing of the bilayer of CTAB salt-bridged with EDTA. The obtained laying-down GNRs of a monolayer on the gold substrate show a small shift of the transverse LSPR around 550-570 nm (with a width of around 100 nm) and a large red shift of the longitudinal LSPR to be 900-1050 nm (with a width of 500 nm), because of the strong electromagnetic coupling between the GNRs and gold substrate. Therefore it can be used in a wide range of wavelengths for surface enhanced Raman spectroscopy (SERS) applications. The film has a high enhancement factor with 10⁵ for R6G.

Fabrication of Stabilized Gold Nanoparticle Oligomers for Surface-Enhanced Spectroscopies

Various time-resolved spectroscopies that take advantage of surface-enhancement have been developed. Only the most robust substrates can withstand the high-intensity laser pulses used by time-resolved methods. We present a simple and reliable stabilization procedure that uses polyvinyl alcohol for the formation of robust gold nanoparticle oligomers that can withstand different hydration and temperature levels. This procedure can be used to produce oligomers with varying and reproducible plasmon resonance conditions. Results show that gold nanoparticle oligomers stabilized in this way are sufficiently sturdy to be used in 3D printing, opening the door for easy production and integration of plasmonic substrates.

A universal strategy for the incorporation of internal standards into SERS substrates to improve the reproducibility of Raman signals

The uneven distribution of metal nanoparticles is a vital influencing factor in the poor uniformity of surface-enhanced Raman scattering (SERS) substrates, which is a challenge in SERS quantitative analysis. Recent reports showed that the reproducibility of a nonuniform SERS substrate can be effectively improved by the use of an internal standard (IS). However, most of these approaches require the investment of time for precise regulation, and those approaches based on the addition of an IS are specific to a certain substrate. In this work, we proposed a simple, rapid and universal method to incorporate an IS into a SERS substrate for improving the reproducibility of Raman signals based on the systematic evaluation of the influencing factors of the competitive adsorption between the IS and the target analytes. Following the proposed pressure drop-coating (PDC) method, an IS-modified gold nanobipyramids (Au NBPs)/anodic aluminum oxide (AAO) SERS substrate was fabricated within 1 min, showing high reproducibility of Raman signals. In addition, the IS-modified Au NBPs/AAO SERS substrate was successfully applied to analyze thiram in freshly squeezed apple juice and the result showed a stable Raman signal with a relative standard deviation of less than 6.00%. What is more, three different commercial SERS chips were modified with an IS molecule using the PDC method. Compared to the traditional SERS chips, the Raman signal reproducibility of the functionalized SERS chips was improved significantly. Since the addition of an IS is not based on a certain substrate, the proposed approach could be useful for all the researchers working in the field of SERS.

Au Nanoflowers for Catalyzing and In Situ Surface-Enhanced Raman Spectroscopy Monitoring of the Dimerization of p-Aminothiophenol

In this work, we demonstrated a facile approach for fabrication of Au nanoflowers (Au NFs) using an amino-containing organosilane, 3-aminopropyltriethoxysilane (APTES), as a shape-directing agent. In this approach, the morphology of the Au particles evolved from sphere-like to flower-like with increasing the concentration of APTES, accompanied by a red shift in the localized surface plasmon resonance peak from 520 to 685 nm. It was identified that the addition of APTES is profitable to direct the preferential growth of the (111) plane of face-centered cubic gold and promote the formation of anisotropic Au NFs. The as-prepared Au NFs, with APTES on their surface, presented effective catalytic and surface-enhanced Raman scattering (SERS) performances, as evidenced by their applications in catalyzing the dimerization of p-aminothiophenol and monitoring the reaction process via in situ SERS analysis.

Strain sensors fabricated by surface assembly of nanoparticles

Harnessing interparticle spatial properties of surface assembly of nanoparticles (SAN) on flexible substrates is a rapidly emerging front of research in the design and fabrication of highly-sensitive strain sensors. It has recently shown promising potentials for applications in wearable sensors and skin electronics. SANs feature 3D structural tunability of the interparticle spatial properties at both molecular and nanoscale levels, which is transformative for the design of intriguing strain sensors. This review will present a comprehensive overview of the recent research development in exploring SAN-structured strain sensors for wearable applications. It starts from the basic principle governing the strain sensing characteristics of SANs on flexible substrates in terms of thermally-activated interparticle electron tunneling and conductive percolation. This discussion is followed by descriptions of the fabrication of the sensors and the proof-of-concept demonstrations of the strain sensing characteristics. The nanoparticles in the SANs are controllable in terms of size, shape, and composition, whereas the interparticle molecules enable the tunability of the electrical properties in terms of interparticle spatial properties. The design of SAN-derived strain sensors is further highlighted by describing several recent examples in the explorations of their applications in wearable biosensor and bioelectronics. Fundamental understanding of the role of interparticle spatial properties within SANs at both molecular and device levels is the focal point. The future direction of the SAN-derived wearable sensors will also be discussed, shining lights on a potential paradigm shift in materials design in exploring the emerging opportunities in wearable sensors and skin electronics.

From Nanoparticle Heteroclusters to Filament Networks by Self-Assembly at the Water-Oil Interface of Reverse Microemulsions

Surface self-assembly of spherical nanoparticles of sizes below 10 nm into hierarchical heterostructures is under arising development despite the inherent difficulties of obtaining complex ordering patterns on a larger scale. Due to template-mediated interactions between oil-dispersible superparamagnetic nanoparticles (MNPs) and polyethylenimine-stabilized gold nanoparticles (Au(PEI)NPs) at the water-oil interface of microemulsions, complex nanostructured films can be formed. Characterization of the reverse microemulsion phase by UV-vis absorption revealed the formation of heteroclusters from Winsor type II phases (WPII) using Aerosol-OT (AOT) as the surfactant. SAXS measurements verify the mechanism of initial nanoparticle clustering in defined dimensions. XPS suggested an influence of AOT at the MNP surface. Further, cryo-SEM and TEM visualization demonstrated the elongation of the reverse microemulsions into cylindrical, wormlike structures, which subsequently build up larger nanoparticle superstructure arrangements. Such WPII phases are thus proven to be a new form of soft template, mediating the self-assembly of different nanoparticles in hierarchical network-like filaments over a substrate during solvent evaporation.

Gold nanomaterials for optical biosensing and bioimaging

Gold nanoparticles (AuNPs) are highly compelling nanomaterials for biomedical studies due to their unique optical properties. By leveraging the versatile optical properties of different gold nanostructures, the performance of biosensing and biomedical imaging can be dramatically improved in terms of their sensitivity, specificity, speed, contrast, resolution and penetration depth. Here we review recent advances of optical biosensing and bioimaging techniques based on three major optical properties of AuNPs: surface plasmon resonance, surface enhanced Raman scattering and luminescence. We summarize the fabrication methods and optical properties of different types of AuNPs, highlight the emerging applications of these AuNPs for novel optical biosensors and biomedical imaging innovations, and discuss the future trends of AuNP-based optical biosensors and bioimaging as well as the challenges of implementing these techniques in preclinical and clinical investigations.

A simple method to estimate the mean number of lipophilic molecules on nanoparticle surfaces by fluorescence measurements

Measurements of fluorescence intensity of the hydrophobic pyridinium salt (DTPSH) remaining in the organic phase after partition experiments in the DCM/H₂O system allowed an approximate method to be developed to estimate the mean number of molecules (N = 942) on the surface of 22.8 nm gold nanoparticles and the separation (1.89 nm) between these organic molecules. This protocol is based on the ability that the organic molecules possess to coat the surface of the nanoparticle, which can migrate from the organic to the aqueous phase as a result of the driving force of the strong binding of sulfur to gold. To validate our estimation, we used a projection of the results obtained by Wales and Ulker to solve the Thomson problem, a mathematicians' challenge, used as a model to calculate the mean distance (1.82 nm) separating particles on the surface, in excellent agreement with the results obtained by our method. The quality of results, the simplicity of calculations, the low fluorescence detection limit, and the inexpensive materials, recommend this procedure for rapid estimates of the mean number of molecules on the surface of nanoparticles.

Synthesis of Uniform Gold Nanorods with Large Width to Realize Ultralow SERS Detection

In this work, we successfully demonstrate high-yield synthesis of high-quality gold nanorods (Au NRs) with width ranging from 6.5 nm to 175 nm by introducing heptanol molecules as secondary templating agents during cetyltrimethylammonium bromide-templated, seeded growth method. The results show that an appropriate concentration of heptanol molecules not only alter the micellization behavior of CTAB in water, but also help silver ions impact the symmetry-breaking efficiency of additional Au-NP seeds in addition to enhancing the utilization of gold precursors. Moreover, the generality and versatility of the present strategy for synthesis of Au NRs with flexible controlled dimensions are further demonstrated by successful synthesis of Au NRs with the assistance of other fatty alcohols with properly long alkyl chains. Furthermore, when arrays of vertically aligned Au NRs with large width (AVA-Au_120×90 NRs) are used as SERS substrates, they can achieve the ultralow limit of detection for crystal violet (10^-16  M) with good reliability and reproducibility, and the rapid detection and identification of residual harmful substances.

Self-assembly of colloidal nanoparticles into 2D arrays at water-oil interfaces: rational construction of stable SERS substrates with accessible enhancing surfaces and tailored plasmonic response

Self-assembly at water-oil interfaces has been shown to be a cheap, convenient and efficient route to obtain densely packed layers of plasmonic nanoparticles which have small interparticle distances. This creates highly plasmonically active materials that can be used to give strong SERS enhancement and whose structure means that they are well suited to creating the highly stable, reproducible and uniform substrates that are needed to allow routine and accurate quantitative SERS measurements. A variety of methods have been developed to induce nanoparticle self-assembly at water-oil interfaces, fine tune the surface chemistry and adjust the position of the nanoparticles at the interface but only some of these are compatible with eventual use in SERS, where it is important that target molecules can access the active surface unimpeded. Similarly, it is useful to transform liquid plasmonic arrays into easy-to-handle free-standing solid films but these can only be used as solid SERS substrates if the process leaves the surface nanoparticles exposed. Here, we review the progress made in these research areas and discuss how these developments may lead towards achieving rational construction of tailored SERS substrates for sensitive and quantitative SERS analysis.

Self-assembly of anisotropic nanoparticles into functional superstructures

Self-assembly of colloidal nanoparticles (NPs) into superstructures offers a flexible and promising pathway to manipulate the nanometer-sized particles and thus make full use of their unique properties. This bottom-up strategy builds a bridge between the NP regime and a new class of transformative materials across multiple length scales for technological applications. In this field, anisotropic NPs with size- and shape-dependent physical properties as self-assembly building blocks have long fascinated scientists. Self-assembly of anisotropic NPs not only opens up exciting opportunities to engineer a variety of intriguing and complex superlattice architectures, but also provides access to discover emergent collective properties that stem from their ordered arrangement. Thus, this has stimulated enormous research interests in both fundamental science and technological applications. This present review comprehensively summarizes the latest advances in this area, and highlights their rich packing behaviors from the viewpoint of NP shape. We provide the basics of the experimental techniques to produce NP superstructures and structural characterization tools, and detail the delicate assembled structures. Then the current understanding of the assembly dynamics is discussed with the assistance of in situ studies, followed by emergent collective properties from these NP assemblies. Finally, we end this article with the remaining challenges and outlook, hoping to encourage further research in this field.