Designing triazatruxene-based donor materials with promising photovoltaic parameters for organic solar cells

Electronic structure, global reactivity descriptors and nonlinear optical properties of glycine interacted with ZnO, MgO and CaO for bacterial detection

Modern laboratory medicine relies on analytical instruments for bacterial detection, focusing on biosensors and optical sensors for early disease diagnosis and treatment. Thus, Density Functional Theory (DFT) was utilized to study the reactivity of glycine interacted with metal oxides (ZnO, MgO, and CaO) for bacterial detection. Total dipole moment (TDM), frontier molecular orbitals (FMOs), FTIR spectroscopic data, electronic transition states, chemical reactivity descriptors, nonlinear optical (NLO) characteristics, and molecular electrostatic potential (MESP) were all investigated at the B3LYP/6-31G(d, p) level using DFT and Time-Dependent DFT (TD-DFT). The Coulomb-attenuating approach (CAM-B3LYP) was utilized to obtain theoretical electronic absorption spectra with the 6-31G(d, p) basis set to be more accurate than alternative quantum chemical calculation approaches, showing good agreement with the experimental data. The TDM and FMO investigation showed that glycine/CaO model has the highest TDM (10.129Debye) and lowest band gap (1.643 eV). The DFT computed IR and the experimental FTIR are consistent. The calculated UV-vis spectra showed a red shift with an increase in polarity following an increase in the absorption wavelength due to the interaction with ZnO, MgO, and CaO. Among the five solvents of water, methanol, ethanol, DMSO and acetone, the water and DMSO enhances the UV-Vis absorption. Glycine/CaO model showed high linear polarizability (14.629 × 10-24esu) and first hyperpolarizability (23.117 × 10-30esu), indicating its potential for nonlinear optical applications. The results showed that all model molecules, particularly glycine/CaO, contribute significantly to the development of materials with potential NLO features for sensor and optoelectronic applications. Additionally, MESP confirmed the increased electronegativity of the studied structures. Additionally, glycine/ZnO nanocomposite was synthesized and characterized using IR and UV-visible spectroscopy to determine their structural and spectroscopic features. It was discovered that there was good agreement between the DFT computed findings and the related experimental data. The antibacterial activity of glycine/ZnO nanocomposites against Staphylococcus aureus (S. aureus) and Pseudomonas aeruginosa were studied in terms of concentration and time. The results showed that increasing the concentration of glycine/ZnO nanocomposite significantly enhanced its antibacterial efficacy by lowering optical density. Notably, Pseudomonas aeruginosa exhibited lower susceptibility to the nanocomposite compared to S. aureus, requiring higher concentrations for effective bactericidal action. In summary, this study contributes novel insights into the dual functionality of glycine-metal oxide complexes, with significant implications as optical biosensor for microbial detection.

Tuning optoelectronic properties of indandione-based D-A materials by malononitrile group acceptors: A DFT and TD-DFT approach

CONTEXT

Indandione-based materials are promising candidates for organic electronics, offering high electron mobility and tunable optoelectronic properties. In this study, we explore the optoelectronic and photovoltaic properties of indandione-based donor-acceptor (D-A) materials, specifically (R1) and (R2), by introducing malononitrile group acceptors into their molecular structure. These strong electron-withdrawing acceptors are designed to enhance charge transfer and overall material performance. The designed molecules (DM1-DM4) exhibit a low optical band gap of approximately 1.77 eV, significantly lower than the reference materials (R1 and R2) at around 2.24 eV in a solvent environment. Among the designed molecules, DM4 stands out with superior photovoltaic parameters, including a narrow optical band gap (1.77 eV), higher electron affinity (3.49 eV), an extended excited state lifetime (10.0 ns) owing to its low electron and hole reorganization energies (λe ~ 0.13 eV and λh ~ 0.24 eV), and improved short-circuit current density (Jsc) of ~ 15.73 mA/cm2. Notably, DM4 achieves a power conversion efficiency (PCE) of ~ 18.5%, making it an excellent candidate for device applications.

METHOD

A comprehensive computational investigation was carried out on indandione-based D-A materials with malononitrile group acceptors (DM1-DM4) using density functional theory (DFT) and time-dependent DFT (TD-DFT) methods, as implemented in Gaussian 16 software. We examined the electronic and optical properties of the proposed molecules through frontier molecular orbital (FMO) analysis, UV-Vis absorption spectra, density of states (DOS), exciton binding energy (Eb), and transition density matrix (TDM) analysis, utilizing GaussView 6.0 and Multiwfn 3.8 software. The photovoltaic parameters and power conversion efficiency (PCE) were evaluated using the Scharber and Alharbi models.

Unveiling peripheral symmetric acceptors coupling with tetrathienylbenzene core to promote electron transfer dynamics in organic photovoltaics

Non-fullerene organic compounds are promising materials for advanced photovoltaic devices. The photovoltaic and electronic properties of the derivatives (TTBR and TTB1-TTB6) were determined by employing density functional theory (DFT) and time-dependent density functional theory (TD-DFT) analyses using the M06/6-311G(d,p) functional. To enhance the effectiveness of fullerene-free organic photovoltaic cells, modifications were applied to end-capped acceptors by using strong electron-withdrawing moieties. The structural tailoring showed a significant electronic impact for HOMO and LUMO for all chromophores, resulting in decreased band gaps (3.184-2.540 eV). Interestingly, all the designed derivatives exhibited broader absorption spectra in the range of 486.365-605.895 nm in dichloromethane solvent. Among all derivatives, TTB5 was observed to be the promising candidate because of its lowest energy gap (2.54 eV) and binding energy (0.494 eV) values, along with the bathochromic shift (605.895 nm). These chromophores having an A-π-A framework might be considered promising materials for efficient organic cells.

Use of benzothiophene ring to improve the photovoltaic efficacy of cyanopyridinone-based organic chromophores: a DFT study

The benzothiophene based chromophores (A1D1-A1D5) with A-π-A configuration were designed via end-capped tailoring with benzothiophene type acceptors using reference compound (A1R). Quantum chemical calculations were accomplished at M06/6-311G(d,p) level to probe optoelectronic and photophysical properties of designed chromophores. Therefore, frontier molecular orbitals (FMOs), binding energy (Eb), open circuit voltage (Voc), transition density matrix (TDM), density of state (DOS) and UV-Vis analyses of A1R and A1D1-A1D5 were accomplished. The designed compounds (A1D1-A1D5) exhibited absorption values in the visible region as 616.316-649.676 nm and 639.753-665.508 nm in gas and chloroform phase, respectively, comparing with reference chromophore. An efficient charge transference from HOMO towards LUMO was found in A1D1-A1D5 chromophores which was further supported by TDM and DOS analyses. Among all chromophores, A1D2 exhibited unique characteristics such as reduced band gap (2.354 eV), higher softness (σ = 0.424 eV), lower exciton binding energy (0.491 eV) and maximum value of open circuit voltage (Voc = 1.981 V). Consequently, A1D2 may be considered as potential candidate for the development of optoelectronic devices. These analyses revealed that the studied compounds exhibited promising findings. They may be utilized in the realm of organic solar cells.

Simple Functionalization of a Donor Monomer to Enhance Charge Transfer in Porous Polymer Networks for Photocatalytic Hydrogen Evolution

Porous polymer networks (PPNs) are promising candidates as photocatalysts for hydrogen production. Constructing a donor-acceptor structure is known to be an effective approach for improving photocatalytic activity. However, the process of how a functional group of a monomer can ensure photoexcited charges transfer and improve the hydrogen evolution rate (HER) has not yet been studied on the molecular level. Herein, we design and synthesize two kinds of triazatruxene (TAT)-based PPNs: TATR-PPN with a hexyl (R) group and TAT-PPN without the hexyl group, to understand the relationship between the presence of the functional group and charge transfer. The hexyl group on the TAT unit was found to ensure the transfer of photoexcited electrons from a donor unit to an acceptor unit and endowed the TATR-PPN with stable hydrogen production.

End-capped engineering of Quinoxaline core-based non-fullerene acceptor materials with improved power conversion efficiency

Improving the light-harvesting efficiency and boosting open circuit voltage are crucial challenges for enhancing the efficiency of organic solar cells. This work introduces seven new molecules (SA1-SA7) to upgrade the optoelectronic and photovoltaic properties of Q-C-F molecule-based solar cells. All recently designed molecules have the same alkyl-substituted Quinoxaline core and CPDT donor but vary in the end-capped acceptor subunits. All the investigated molecules have revealed superior properties than the model (R) by having absorbance ranging from 681 nm to 782 nm in the gaseous medium while 726 nm-861 nm in chloroform solvent, with the lowest band gap ranging from 1.91 to 2.19 eV SA1 molecule demonstrated the highest λmax (861 nm) in chloroform solvent and the lowest band gap (1.91 eV). SA2 molecule has manifested highest dipole moment (4.5089 D), lower exciton binding energy in gaseous (0.33 eV) and chloroform solvent (0.47 eV), and lower charge mobility of hole (0.0077693) and electron (0.0042470). At the same time, SA7 showed the highest open circuit voltage (1.56 eV) and fill factor (0.9166) due to solid electron-pulling acceptor moieties. From these supportive outcomes, it is inferred that our computationally investigated molecules may be promising candidates to be used in advanced versions of OSCs in the upcoming period.

Exploration of nonlinear optical properties of 4-methyl-4H-1,2,4-triazol-3-yl)thio)-N-phenylpropanamide based derivatives: experimental and DFT approach

Triazoles, nitrogen-containing heterocycles, have gained attention for their applications in medicinal chemistry, drug discovery, agrochemicals, and material sciences. In the current study, we synthesized novel derivatives of N-substituted 2-((5-(3-bromophenyl)-4-methyl-4H-1,2,4-triazol-3-yl)thio)-N-phenylpropanamide and conducted a comprehensive investigation using density functional theory (DFT). These novel structural hybrids of 1,2,4-triazole were synthesized through the multi-step chemical modifications of 3-bromobenzoic acid (1). Initially, compound 1 was converted into its methyl-3-bromobenzoate (2) which was then transformed into 3-bromobenzohydrazide (3). The final step involved the cyclization of compound 3, producing its 1,2,4-triazole derivative (4). This intermediate was then coupled with different electrophiles, resulting in the formation of the final derivatives (7a-7c). Additionally, the characterization of these triazole-based compounds (7a, 7b, and 7c) were carried out using techniques such as IR, HNMR, and UV-visible spectroscopy to understand their structural and spectroscopic properties. The DFT study utilized M06/6-311G(d,p) functional to investigate geometrical parameters, HOMO-LUMO energies, natural bond orbital analyses, transition density matrix (TDM), density of states, and nonlinear optical (NLO) properties. The FMO analysis revealed that compound 7c exhibited the lowest band gap value (4.618 eV). Notably, compound 7c exhibited significant linear polarizability (4.195 >  × 10-23) and first and second hyperpolarizabilities (6.317 >  × 10-30, 4.314 × 10-35), signifying its potential for nonlinear optical applications. These NLO characteristics imply that each of our compounds, especially 7c, plays a crucial part in fabricating materials showing promising NLO properties for optoelectronic applications.

Effect of Benzothiadiazole-Based π-Spacers on Fine-Tuning of Optoelectronic Properties of Oligothiophene-Core Donor Materials for Efficient Organic Solar Cells: A DFT Study

In this work, five novel A-π-D-π-A type molecules D1-D5 were designed by adding unusual benzothiadiazole derivatives as π-spacer blocks to the efficient reference molecule DRCN5T for application as donor materials in organic solar cells (OSCs). Based on a density functional theory approach, a comprehensive theoretical study was performed with different functionals (B3LYP, B3LYP-GD3, B3LYP-GD3BJ, CAM-B3LYP, M06, M062X, and wB97XD) and with different solvent types (PCM and SMD) at the extended basis set 6-311+g(d,p) to evaluate the structural, optoelectronic, and intramolecular charge transfer properties of these molecules. The B3LYP-GD3BJ hybrid functional was used to optimize the studied molecules in CHCl3 solution with the SMD model solvent as it provided the best results compared to experimental data. Transition density matrix maps were simulated to examine the hole-electron localization and the electronic excitation processes in the excited state, and photovoltaic parameters including open-circuit photovoltage and fill factor were investigated to predict the efficiency of these materials. All the designed materials showed promising optoelectronic and photovoltaic characteristics, and for most of them, a red shift. Out of the proposed molecules, [1,2,5]thiadiazolo[3,4-d]pyridazine was selected as a promising π-spacer block to evaluate its interaction with PC61BM in a composite to understand the charge transfer between the donor and acceptor subparts. Overall, this study showed that adding π-spacer building blocks to the molecular structure is undoubtedly a potential strategy to further enhance the performance of donor materials for OSC applications.

Promising impact of push-pull configuration into designed octacyclic naphthalene-based organic scaffolds for nonlinear optical amplitudes: a quantum chemical approach

In opto-electronics, non-fullerene (NF) derivatives are regarded as efficient non-linear optical (NLO) materials. The present investigation was based on designing NF naphthalene-based derivatives (PCMD1-D9) with D-π-A configuration from PCMR. DFT analysis at M06/6-311G (d,p) level was accomplished to explore the photonic behavior of PCMD1-D9 compounds. Various kind of analysis like; UV-Vis, density of state (DOS), natural bond orbitals (NBOs), transition density matrix (TDM) and frontier molecular orbitals (FMOs) analyses were accomplished to understand the NLO properties of said chromophores. The configuration change led to considerable charge distribution over highest occupied and lowest unoccupied molecular orbitals with minimum band difference. The energy gap trend for all the entitled compounds was observed as; PCMD8 < PCMD5 = PCMD9 < PCMD6 < PCMD7 < PCMD4 < PCMD3 < PCMD2 < PCMD1 with the least band gap of 2.048 eV in PCMD8 among all the compounds. The UV-Visible spectrum of the entitled chromophores manifested high values of λmax in derivatives contrary to PCMR. Additionally, NBO findings explored effective intramolecular charge transfer and maximum energy of stabilization (34.31 kcal/mol) for PCMD8 chromophore. The highest linear polarizability (<α>) and dipole moment (µtot) values were exhibited by PCMD5 at 2.712 × 10-22. and 1.995 × 10-17 esu, respectively. PCMD8 push-pull configured molecular entity exhibited highest first hyper-polarizability (βtot) at 4.747 × 10-27 esu and second hyper-polarizability at 6.867 × 10-32 esu. Overall, all the formulated chromophores exhibited significant NLO results contrary to PCMR. Hence, through this structural tailoring via various acceptors, effective NLO materials were obtained for optoelectronic applications.

Synthesis and Antioxidant Studies of 2,4-Dioxothiazolidine-5-acetic Acid Based Organic Salts: SC-XRD and DFT Approach

In the current study, two organic salts (1 and 2) are synthesized, and then crystalline structures are characterized by FTIR, UV spectroscopy, and X-ray crystallographic studies. The organic salts 1 and 2 are optimized at the M06/6-311G(d,p)level of theory and further utilized for analysis of natural bond orbitals (NBOs), natural population, frontier molecular orbitals (FMOs), and global reactivity parameters, which confirmed the stability of the studied compounds and charge transfer phenomenon in the studied compounds. The studies further revealed that 1 and 2 are more stable than 3. The lowest energy merged monomer-coformer conformations were docked as flexible ligands with rigid fungal proteins and DNA receptors. The stagnant binding of the monomer through two H bonds with protein was observed for ligands 1 and 3 while different pattern was found with 2. The coformers formed a single H bond with the active site in 2 and 3 and a single pi-arene H interaction in 1. The two-point ligand-receptor interactions hooked the monomer between DNA base pairs for partial intercalation; pi stacking with additive hydrogen bonding with the base pair led to a strong benzimidazole interaction in 1 and 2, whereas ethylene diamine formed weak H bonding. Thus, the molecular docking predicted that the coformer exhibited DNA intercalation reinforced by its salt formation with benzimidazole 1 and methyl benzimidazole 2. Antioxidant studies depicted that 3 has a higher IC50 value than that of 2,4-D and also the largest value among the studied compounds, whereas 2 showed the lowest value among the studied compounds.

Tuning the optoelectronic properties of acridine-triphenylamine (ACR-TPA) based novel hole transporting material for high efficiency perovskite and organic solar cell

In this research, five distinct small donor molecules (designated as ACR-TPA-X1, ACR-TPA-X2, ACR-TPA-X3, ACR-TPA-X4, ACR-TPA-X5) are constructed by replacing the methoxy groups on both sides of the model molecule (ACR-TPA-R) with thiophene bridged acceptor moieties. We have used the B3LYP/6-31G (d,p) model for our computational studies. Our model molecule's morphological alteration has resulted in a lowered E_g of 1.77-2.51 eV as compared to model (ACR-TPA-R=3.84 eV). ACR-TPA-X2 investigated the λ_max at 776 nm. ACR-TPA-X4 was found to be most miscible with dichloromethane (DCM). The greatest V_OC(1.21 eV) was observed in ACR-TPA-X1. Among all of the variants, ACR-TPA-X1 had the highest PCE (23.42%). It was found that ACR-TPA-X4 had the highest electron mobility (0.00370 eV) and ACR-TPA-X5 had the highest hole mobility (0.00324 eV) of all the materials examined. The findings prove the worth of the methods used, paving the way for the development of effective small donors for OSCs and HTMs for PSCs.

Study of the Crystal Architecture, Optoelectronic Characteristics, and Nonlinear Optical Properties of 4-Amino Antipyrine Schiff Bases

Two Schiff bases, (E)-4-((2-chlorobenzylidene)amino)-1,5-dimethyl-2-phenyl-1,2-dihydro-3H-pyrazol-3-one (4AAPOCB) and (E)-4-((4-chlorobenzylidene)amino)-1,5-dimethyl-2-phenyl-1,2-dihydro-3H-pyrazol-3-one (4AAPPCB), have been synthesized and grown as single crystals. Single-crystal X-ray diffraction analysis was employed to determine the crystal structure of the compounds, and the results suggest that the compounds crystallized into an orthorhombic crystal system having P2₁2₁2₁ and Pbca space groups, respectively. Further, the crystallinity of the compounds was analyzed by the PXRD technique. The UV-vis-NIR spectra of the compounds demonstrate excellent transmittance in the entire visible region. The lower cutoff wavelengths of the compounds were determined to be 338 and 333 nm, respectively; additionally, optical band gaps of the compounds found were 4.60 and 4.35 eV. FTIR and NMR (¹H and ¹³C) spectral techniques were utilized to analyze the molecular structure of the compounds. The compounds emit photoluminescence with broad emission bands with centers at 401 and 418 nm. The thermal stability and phase transitions were assessed through thermogravimetric methods. The phase transition prior to melting was indicated by the endothermic event at around 190 °C in the DTA curves of both crystals, and the same was observed in the DSC curves. The second harmonic efficiencies of the powdered compounds I and II were found to be 3.52 and 1.13 times better than that of the standard reference KDP. The 4AAPOCB and 4AAPPCB compounds showed isotropic polarizability amplitudes of 46.02 × 10^-24 and 46.52 × 10^-24 esu, respectively. The calculation of linear polarizability and NLO second-order polarizability (β) along with other optical parameters was performed for optimized geometries. The nonzero amplitudes of the average β values for compounds 4AAPOCB and 4AAPPCB were found to be 14.74 × 10^-30 and 8.10 × 10^-30 esu, respectively, which show a decent potential of the synthesized molecules for NLO applications. The calculated β amplitudes were further explained based on calculated electronic parameters like molecular electrostatic potentials, frontier molecular orbitals, molecular orbital energies, transition energies, oscillator strengths, and unit spherical representation of NLO polarizability. The current analysis emphasizes the significance of synthesized compounds as prospective candidates for optical and NLO applications through the use of experiments and quantum computations.

The Electronic Properties of Cadmium Naphthalene Diimide Coordination Complex

The computational simulations for electronic properties of cadmium (Cd) coordinated L-alanine NDI ligand (H₂-l-ala NDI) based complex are the focus of this research. For the first time, the Cd-NDI complex (monomer) has been produced using water as the solvent; this is a new approach to synthesizing the Cd-NDI complex that has not been reported yet. Along with crystallography and Hirsch field analysis, CAM-B3LYP/LANL2DZ and B3LYP/LANL2MB basis sets were used, and in-depth characterisation of the Cd-NDI complex by following DFT and TD-DFT hypothetical simulations. Hyperpolarizabilities, frontier molecular orbitals (FMOs), the density of states (DOS), dipole moment (µ), electron density distribution map (EDDM), transition density matrix (TDM), molecular electrostatic potential (MEP), electron-hole analysis (EHA), and electrical conductivity (σ) have all been studied regarding the Cd-NDI complex. The vibrational frequencies and types of interaction are studied using infrared (IR) and non-covalent interaction (NCI) analysis with iso-surface. In comparison to the Cd-NDI complex with 2.61, 2.42 eV E_g (using CAM-B3LYP/LANL2DZ and B3LYP/LANL2MB basis sets, respectively) and 376 nm λ_max, (in case of B3LYP/LANL2MB λ_max is higher), H₂-l-ala NDI have 3.387 eV E_g and 375 nm λ_max, metal-ligand coordination in complex dramatically altered charge transfer properties, such as narrowing band gap (E_g). Based on the electronic properties analysis of Cd-NDI complex, it is predicted that the Cd-NDI complex will have a spectacular (nonlinear optical) NLO response. The Cd-NDI complex is discovered to be advantageous for the creation of future nanoscale devices due to the harmony between the Cd metal and H₂-l-ala NDI, in addition to their influences on NLO characteristics.

Designing of anthracene-arylamine hole transporting materials for organic and perovskite solar cells

This study focuses on the creation of 5 small donor molecules (A102W1-A102W5) by substituting the one-sided methoxy group of model (A102R) with different thiophene bridged acceptor moieties. B3LYP/6-31**G (d,p) model has been employed for computational analysis. The best miscibility was found for A102W3 in dichloromethane (DCM) solvent, where its λ_max was also found to be at 753 nm, its E_g was found to be 1.55 eV as well as dipole moment in DCM was 21.47 D. The percentage of PCE among all the variants was greatest for A102W2 (25.31%). The electron reorganization energy shown by A102W4 was 0.00470 eV, whereas the hole reorganization energy investigated in A102W2 was 0.00586 eV representing their maximum electron and hole mobility respectively amongst all. Results validate the value of specified techniques, opening a new door to create efficient small donors for OSCs and HTMs for PSCs.

Enhancing the Photovoltaic Properties via Incorporation of Selenophene Units in Organic Chromophores with A2-π2-A1-π1-A2 Configuration: A DFT-Based Exploration

Currently, polymer organic solar cells (POSCs) are widely utilized due to their significant application, such as low-cost power conversion efficiencies (PCEs). Therefore, we designed a series of photovoltaic materials (D1, D2, D3, D5 and D7) by the incorporation of selenophene units (n = 1-7) as π₁-spacers by considering the importance of POSCs. Density functional theory (DFT) calculations were accomplished at MPW1PW91/6-311G (d, p) functional to explore the impact of additional selenophene units on the photovoltaic behavior of the above-mentioned compounds. A comparative analysis was conducted for designed compounds and reference compounds (D1). Reduction in energy gaps (∆E = 2.399 - 2.064 eV) with broader absorption wavelength (λ_max = 655.480 - 728.376 nm) in chloroform along with larger charge transference rate was studied with the addition of selenophene units as compared to D1. A significantly higher exciton dissociation rate was studied as lower values of binding energy (E_b = 0.508 - 0.362 eV) were noted in derivatives than in the reference (E_b = 0.526 eV). Moreover, transition density matrix (TDM) and density of state (DOS) data also supported the efficient charge transition origination from HOMOs to LUMOs. Open circuit voltage (V_oc) was also calculated for all the aforesaid compounds to check the efficiency, and significant results were seen (1.633-1.549 V). All the analyses supported our compounds as efficient POSCs materials with significant efficacy. These compounds might encourage the experimental researchers to synthesize them due to proficient photovoltaic materials.

Exploring Probenecid Derived 1,3,4-Oxadiazole-Phthalimide Hybrid as α-Amylase Inhibitor: Synthesis, Structural Investigation, and Molecular Modeling

1,3,4-Oxadiazole moiety is a crucial pharmacophore in many biologically active compounds. In a typical synthesis, probenecid was subjected to a sequence of reactions to obtain a 1,3,4-oxadiazole–phthalimide hybrid (PESMP) in high yields. The NMR (1H and 13C) spectroscopic analysis initially confirmed the structure of PESMP. Further spectral aspects were validated based on a single-crystal XRD analysis. Experimental findings were confirmed afterwards by executing a Hirshfeld surface (HS) analysis and quantum mechanical computations. The HS analysis showed the role of the π⋯π stacking interactions in PESMP. PESMP was found to have a high stability and lower reactivity in terms of global reactivity parameters. α-Amylase inhibition studies revealed that the PESMP was a good inhibitor of α-amylase with an s value of 10.60 ± 0.16 μg/mL compared with that of standard acarbose (IC50 = 8.80 ± 0.21 μg/mL). Molecular docking was also utilized to reveal the binding pose and features of PESMP against the α-amylase enzyme. Via docking computations, the high potency of PESMP and acarbose towards the α-amylase enzyme was unveiled and confirmed by docking scores of −7.4 and −9.4 kcal/mol, respectively. These findings shine a new light on the potential of PESMP compounds as α-amylase inhibitors.

Synthesis, characterization and exploration of photovoltaic behavior of hydrazide based scaffolds: a concise experimental and DFT study

Solar energy being a non-depleting energy resource, has attracted scientists' attention to develop efficient solar cells to meet energy demands. Herein, a series of hydrazinylthiazole-4-carbohydrazide organic photovoltaic compounds (BDTC1-BDTC7) with an A1-D1-A2-D2 framework was synthesized with 48-62% yields, and their spectroscopic characterization was accomplished using FT-IR, HRMS, ¹H and ¹³C-NMR techniques. Density functional theory (DFT) and time dependent DFT analyses were performed utilizing the M06/6-31G(d,p) functional to calculate the photovoltaic and optoelectronic properties of BDTC1-BDTC7via numerous simulations of the frontier molecular orbitals (FMOs), transition density matrix (TDM), open circuit voltage (V _oc) and density of states (DOS). Moreover, the conducted analysis on the FMOs revealed efficient transference of charge from the highest occupied to the lowest unoccupied molecular orbitals (HOMO → LUMO), further supported by TDM and DOS analyses. Furthermore, the values of binding energy (E _b = 0.295 to 1.150 eV), as well as reorganization energy of the holes (-0.038-0.025 eV) and electrons (-0.023-0.00 eV), were found to be smaller for all the studied compounds, which suggests a higher exciton dissociation rate with greater hole mobility in BDTC1-BDTC7. V _oc analysis was accomplished with respect to HOMO_PBDB-T-LUMO_ACCEPTOR. Among all the synthesized molecules, BDTC7 was found to have a reduced band gap (3.583 eV), with a bathochromic shift and absorption maximum at 448.990 nm, and a promising V _oc (1.97 V), thus it is regarded as a potential candidate for high performance photovoltaic applications.

In Silico Designing of Thieno[2,3-b]thiophene Core-Based Highly Conjugated, Fused-Ring, Near-Infrared Sensitive Non-fullerene Acceptors for Organic Solar Cells

The performance of organic solar cells (OSCs) has been improving steadily over the last few years, owing to the optimization of device fabrication, fine-tuning of morphology, and thin-film processing. Thiophene core containing fused ring-type non-fullerene acceptors (NFAs) achieved significant proficiency for highly efficient OSCs. Quantum chemical computations are utilized herein with the motive of suggesting new NIR sensitive, highly efficient low-band gap materials for OSCs. A series of extended conjugated A-π-D-π-A architectured novel fused-ring NFAs (FUIC-1-FUIC-6) containing thieno[2,3-b]thiophene-based donor core are proposed by substituting the end-capped units of synthesized molecule F10IC. Different properties including frontier molecular orbital analysis, density of states analysis, transition density matrix analysis, excitation energy, reorganizational energies of both holes (λ_h) and electrons (λ_e), and open-circuit voltage (V _oc) were performed employing the density functional theory approach. Charge transfer analysis of the best-designed molecule with the donor complex was analyzed to comprehend the efficiency of novel constructed molecules (FUIC-1-FUIC-6) and compared with the reference. End-caped acceptor alteration induces the reduction of the energy gap between HOMO-LUMO (1.88 eV), tunes the energy levels, longer absorption in the visible and near-infrared regions, larger V _oc, smaller reorganizational energies, and binding energy values in designed structures (FUIC-1-FUIC-6) in comparison to reference (FUIC). The designed molecules show the best agreement with the PTBT-T donor polymer blend and cause the highest charge from the HOMO to the LUMO orbital. Our findings predicted that thieno[2,3-b] thiophene-based newly designed molecules would be efficient NFAs with outstanding photovoltaic characteristics and can be used in future applications of OSCs.

Effect of different end-capped donor moieties on non-fullerenes based non-covalently fused-ring derivatives for achieving high-performance NLO properties

A series of derivatives (DOCD2-DOCD6) with D-π-A configuration was designed by substituting various efficient donor moieties via the structural tailoring of o-DOC6-2F. Quantum-chemical approaches were used to analyze the optoelectronic properties of the designed chromophores. Particularly, M06/6-311G(d,p) functional was employed to investigate the non-linear optical (NLO) response (linear polarizability ⟨α⟩, first (β_tot) and second ([Formula: see text]_tot) order hyperpolarizabilities) of the designed derivatives. A variety of analyses such as frontier molecular orbital (FMO), absorption spectra, transition density matrix (TDMs), density of states (DOS), natural bond orbital (NBO) and global reactivity parameters (GRPs) were employed to explore the optoelectronic response of aforementioned chromophores. FMO investigation revealed that DOCD2 showed the least energy gap (1.657 eV) among all the compounds with an excellent transference of charge towards the acceptor from the donor. Further, DOS pictographs and TDMs heat maps also supported FMO results, corroborating the presence of charge separation states along with efficient charge transitions. NBO analysis showed that π-linker and donors possessed positive charges while acceptors retained negative charges confirming the D-π-A architecture of the studied compounds. The λ_max values of designed chromophores (659.070-717.875 nm) were found to have broader spectra. The GRPs were also examined utilizing energy band gaps of E_HOMO and E_LUMO for the entitled compounds. Among all the derivatives, DOCD2 showed the highest values of β_tot (7.184 × 10^-27 esu) and [Formula: see text]_tot (1.676 × 10^-31 esu), in coherence with the reduced band gap (1.657 eV), indicating future potentiality for NLO materials.

Computational Investigation of Near-Infrared-Absorbing Indeno[1,2-b]indole Analogues as Acceptors in Organic Photovoltaic Devices

Organic solar cells (OSCs) with fullerene-free acceptors have recently been in high demand in the solar cell market because OSCs are less expensive, more flexible, long-lasting, eco-friendly, and, most importantly, have better photovoltaic performance with a higher PCE. We used INTIC as our reference R molecule and designed five new molecules DF1-DF5 from this R molecule. We attempted to test the power conversion efficiencies of five designed novel molecules, DF1-DF5. Therefore, we compared the PCE values of DF1-DF5 with that of R. We used a variety of computational techniques on these molecules to achieve this goal. Among the designed molecules, DF5 proved to be the best due to its lowest H-L bandgap energy E _g (1.82 eV), the highest value of λ_max (844.58 nm) within dichloromethane, the lowest excitation energy (1.47 eV), and the lowest oscillator strength value. The newly designed molecule DF2 exhibited the highest dipole moment (21.98 D), while DF3 displayed the minimum binding energy (0.34 eV) and the highest V _oc value (1.37 V) with HOMO_donor-LUMO_acceptor. According to the partial density of states (PDOS) and transition density matrix (TDM) analysis, DF2 and DF5 exhibited the best results. Charge-transfer (CT) analysis of the blend DF5 and PTB7-Th confirmed the accepting nature of the DF5 molecule. These findings show that by modifying the end-capped units, we can create customized molecules with improved photovoltaic properties. These findings also show that when compared with R, all of the designed molecules DF1-DF5 have improved optoelectronic properties. As a result, it is strongly advised to employ these conceptualized molecules in the practical synthesis of organic solar cells (OSCs).

Synthesis of a Triazaisotruxene-Based Porous Organic Polymer and Its Application in Iodine Capture

A new triazaisotruxene-based porous organic polymer (POP) was designed and successfully synthesized by a FeCl3-promoted crosslinking reaction. As a result of its porosity and good thermal stability, the designed POP can be utilized as a promising adsorbent for iodine, not only in the gaseous phase, but also in organic and aqueous solutions. Compared to its triazatruxene (TN) analogue, the ITN-based POP shows equal iodine uptake in the gaseous phase and in hexane solution, and better uptake in aqueous solution.

First theoretical framework for highly efficient photovoltaic parameters by structural modification with benzothiophene-incorporated acceptors in dithiophene based chromophores

Now a days, researchers are constantly doing efforts to upgrade the performance of solar based devices with the aim of increasing the role of photovoltaic materials in modern hi-tech optoelectronic applications. Realizing the recent energy conditions across the globe, research is diverted from fullerene to non-fullerene electron acceptor moieties in this era, considering their remarkable contribution in organic solar cells (OSCs). Therefore, we designed seven novel non-fullerene fused ring electron acceptor chromophores (MD2-MD8) from DOC2C6-2F by structural tailoring with different acceptors at end-capped units. DFT study was performed at B3LYP functional to discover the opto-electronic characteristics of the newly tailored chromophores. Various analysis such as frontier molecular orbitals (FMOs), transition density matrix (TDM), density of states (DOS), binding energy (Eb), reorganization energy, open circuit voltage (Voc) was carried out to comprehend the photovoltaic response of MD2-MD8. Decrease in band gaps (1.940-1.571 eV) with wider absorption spectrum (725.690-939.844 nm in chloroform) along with greater charge transfer rate from HOMO towards LUMO were examined in derivatives as compared to MR1 (Egap = 1.976 eV, λmax = 738.221 nm) except MD7. Further, in all derivatives, smaller values of Eb (0.252-0.279 eV) were examined than that of reference (0.296 eV). These lower binding energy values of MD2-MD8 indicated the higher rate of excitation dissociation with lager charger transfer rate than MR1, which further supported by DOS and TDM analyses. Additionally, least reorganization energy in the aforesaid compounds for hole with electron was also inspected. Moreover, Voc a good photovoltaic response was noted for all studied compounds which indicated that these compounds are suitable to synthesize OSCs in future.

Exploration of the interesting photovoltaic behavior of the fused benzothiophene dioxide moiety as a core donor with modification in acceptors for high-efficacy organic solar cells

Non-fullerene-based chromophores with end-capped acceptor modification used in organic solar cells (OSCs) have proven to offer improved performance. Therefore, eight unique benzothiophene-based molecules (D2-D9) were designed by the end-capped acceptor manipulation of a reference molecule (R1). Density functional theory (DFT) and time-dependent density functional theory (TD-DFT) calculations at the B3LYP level were performed to investigate various parameters such as the optical properties, frontier molecular orbitals (FMOs), transition density matrix (TDM), binding energy, density of states (DOS), open-circuit voltage (V oc), and reorganization energies of electrons (λ e) and holes (λ h), to better understand the optoelectronic properties of the newly designed compounds. All the derivatives had broader absorption spectra of 737.562-700.555 nm with a reduced energy gap of 2.132-1.851 eV compared to those of the reference (719.082 nm), except for D8 and D9. A comparable value of V oc and lower reorganization energies were found in the derivatives compared to those of R1. Within the studied compounds, D3 was predicted to be a good optoelectronic material for environmentally friendly organic solar cells (EFOSCs) because of its superior optoelectronic capabilities, low-energy band gap (1.851 eV), highest λ max values of 794.516 and 744.784 nm in chloroform and the gas phase, respectively, and lowest transition energy (1.561 eV) than those of the reference and the other derivatives. Subsequently, end-capped acceptor modification was proven to be an effective method to achieve desired optoelectronic characteristics.

Spirothienoquinoline-based acceptor molecular systems for organic solar cell applications: DFT investigation

In this research, eight three-dimensional benzothiadiazole and spirothienoquinoline-based donor molecules of the A-D-A-D-A configuration were formulated by introducing new acceptor groups (A1-A4) to the terminal sites of recently synthesized potent donor molecule (^tBuSAF-Th-BT-Th-^tBuSAF). Frontier molecular orbital analysis, reorganization energies, the density of states analysis, transition density matrix analysis, dipole moment, open-circuit voltage, and some photophysical properties were all assessed using CAMB3LYP/LanL2DZ. The optoelectronic properties of freshly proposed compounds were compared to the reference molecule (SQR). Due to the existence of robust electron-attracting acceptor moiety, SQM3 and SQM7 had the greatest maximum absorption of all other investigated molecules, with the values of 534 and 536 nm, respectively. The maximum dipole moment, narrow bandgap (3.81 eV and 3.66 eV), and HOMO energies (- 5.92 eV, 5.95 eV) are also found in SQM3 and SQM7, respectively. The SQM3 molecule also possesses the least reorganization energy for hole mobility (0.007237 eV) than all other considered molecules. The open-circuit voltage of all the molecules considered to be donors, was calculated with respect to PC₆₁BM and it is estimated that except SQM7 and SQM3 all other newly developed molecules have improved open-circuit voltage. The findings show that most of the designed donor molecules can perform better experimentally and should be employed for practical implementations in the future.

M, Rehman MFU, Assiri MA, Mashhadi SMA, Akram MS, Lu C. Evaluating Zn-Porphyrin-Based Near-IR-Sensitive Non-Fullerene Acceptors for Efficient Panchromatic Organic Solar Cells

Porphyrin-based non-fullerene acceptors (NFAs) have shown pronounced potential for assembling low-bandgap materials with near-infrared (NIR) characteristics. Herein, panchromatic-type porphyrin-based molecules (POR1-POR5) are proposed by modulating end-capped acceptors of a highly efficient porphyrin-based NFA PORTFIC(POR) for organic solar cells (OSCs). Quantum chemical structure-property relationship has been studied to discover photovoltaic and optoelectronic characteristics of POR1-POR5. Results show that optoelectronic properties of the POR1-POR5 are better in all aspects when compared with the reference POR. All proposed NFAs particularly POR5 proved to be the preferable porphyrin-based NIR sensitive NFA for OSCs applications owing to lower energy gap (1.56 eV), transition energy (1.11 eV), binding energy (Eb =0.986 eV), electron mobility (λe =0.007013Eh ), hole mobility (λh =0.004686 Eh ), high λmax =1116.27 nm and open-circuit voltage (Voc =1.96 V) values in contrast to the reference POR and other proposed NFAs. This quantum chemical insight provides sufficient evidence about excellent potential of the proposed porphyrin-based NIR sensitive NFA derivatives for their use in OSCs.

Bithieno Thiophene-Based Small Molecules for Application as Donor Materials for Organic Solar Cells and Hole Transport Materials for Perovskite Solar Cells

This quantum mechanical study focuses on the designing of twelve (MPAM1-MPAM12) bithieno thiophene (BTTI) central core-based small molecules to explore optoelectronic properties as donor candidates for organic solar cells (OSCs) and hole transport materials (HTMs) accompanied by enhanced charge mobility for perovskite solar cells (PSCs). MPAM1-MPAM6 have been designed by the substitution of thiophene-bridged end-capped acceptors on both side terminals of reference (MPAR). MPAM7-MPAM12 are tailored by adopting the same tactic on one side terminal only. MPW1PW91/6-311G (d,p) has been employed for all computational simulations. MPAM12 revealed the highest λmax at 639 nm in dichloromethane (DCM) solvent with the lowest E g of 1.78 eV and dipole moment (20.74 D) in the solvent phase, showing excellent miscibility as compared to the reference. All designed chromophores (MPAM1-MPAM12) demonstrated higher estimated V OC and power conversion efficiency (PCE) when compared to MPAR, suggesting their prominent operational efficiency. Among all, MPAM4 manifested the highest PCE (47.86%). MPAM2 portrayed the highest electron mobility (0.0041573 eV) and MPAM3 exhibited the highest hole mobility (0.0047178 eV). The outcomes highlight the adequacy of the planned strategies, paving a new route for the development of small-molecule HTMs for PSCs and donor contributors for OSCs.

Novel Quinoline-Derived Chemosensors: Synthesis, Anion Recognition, Spectroscopic and Computational Study

Fluorescent-small molecules offer an excellent source of chemosensors when optimized for detection of anions with sensitivity and selectivity, low-cost and robust synthesis. In the present study we synthesized new quinoline-based...

Novel quad-rotor-shaped photovoltaic materials: first example of fused-ring non-fullerene acceptors with proficient photovoltaic properties for high-performance solar cells

Development of novel materials for organic solar cells is a booming area of current research. Fused-ring electron accepters are the potential agents of revolution in organic photovoltaic devices and revealing high efficiency in organic solar cells. This study highlights the novel quad-rotor-shaped molecules as first example of efficient fused-ring non-fullerene acceptor materials with proficient photovoltaic parameters for their utilization in high-performance organic solar cells. First time, eight quad-rotor-shaped fused-ring electron accepters (QRFR-1-QRFR-8) are developed via modulating end-caps of experimentally synthesized (BFTT-TN) molecule (QRFR). Optoelectronic properties of proposed molecules are determined using frontier molecular orbitals (FMO), UV-Visible, density of state (DOS), overlap DOS (ODOS), transition density matrix (TDM) heat maps, open circuit voltage (V_oc), binding energies (E_b), reorganization energy of electron (λ_e), hole (λ_h), charge transfer analysis, and compared with reference QRFR. All proposed fused-ring electron accepters disclose less energy gap and λ_max in near IR region than QRFR after end-capped engineering. Highest V_oc with respect to HOMO_PM6-LUMO_acceptor is found 1.66 V in QRFR-6 than QRFR (1.63 V). E_b values of QRFR-1-QRFR-8 are found better and comparable with QRFR. The λ_e is found smaller than QRFR in all molecules except QRFR-5. The proposed quad-rotor-shaped molecules exhibit proficient photovoltaic features and can serve as best candidate for organic solar cells when blended with PM6 film. This study not only enlightens the researchers to use end-capped reforms as effective tactic for designing materials, but also provides novel quad-rotor-shaped materials to experimentalist for synthesis and their usage in future application of organic solar cells.

Exploration of Photophysical and Nonlinear Properties of Salicylaldehyde-Based Functionalized Materials: A Facile Synthetic and DFT Approach

The current research presents the synthesis of novel salicylaldehyde thiosemicarbazones (1-6) and their spectroscopic characterization employing UV-visible, Fourier transform infrared spectroscopy, and NMR techniques. Experimental results are compared and validated with the results obtained theoretically by employing density functional theory at the M06 level with the 6-311G (d,p) basis set. Further, various parameters [natural bond orbital (NBO)], linear and nonlinear optical (NLO) properties, and global reactivity parameters (GRPs) are computationally calculated. The NBO approach has confirmed the stability of compounds on account of charge delocalization and hyper conjugative interaction network. Frontier molecular orbital analysis has explained the charge transfer and chemical reactivity capability, while GRPs have led to the analysis of kinetic stability of the studied molecules. Further, the probability of being NLO-active has been theoretically proved by the HOMO/LUMO energy difference (4.133-4.186 eV) and β values (192.778-501.709 a.u). These findings suggest that the studied compounds possess potential NLO applications as they have shown larger NLO values in comparison with that of the urea molecule, and such distinct properties prove their technological importance.

Exploration of promising optical and electronic properties of (non-polymer) small donor molecules for organic solar cells

Non-fullerene based organic compounds are considered promising materials for the fabrication of modern photovoltaic materials. Non-fullerene-based organic solar cells comprise of good photochemical and thermal stability along with longer device lifetimes as compared to fullerene-based compounds. Five new non-fullerene donor molecules were designed keeping in view the excellent donor properties of 3-bis(4-(2-ethylhexyl)-thiophen-2-yl)-5,7-bis(2ethylhexyl) benzo[1,2-:4,5-c']-dithiophene-4,8-dione thiophene-alkoxy benzene-thiophene indenedione (BDD-IN) by end-capped modifications. Photovoltaic and electronic characteristics of studied molecules were determined by employing density functional theory (DFT) and time dependent density functional theory (TD-DFT). Subsequently, obtained results were compared with the reference molecule BDD-IN. The designed molecules presented lower energy difference (ΔΕ) in the range of 2.17-2.39 eV in comparison to BDD-IN (= 2.72 eV). Moreover, insight from the frontier molecular orbital (FMO) analysis disclosed that central acceptors are responsible for the charge transformation. The designed molecules were found with higher λmax values and lower transition energies than BDD-IN molecule due to stronger end-capped acceptors. Open circuit voltage (Voc) was observed in the higher range (1.54-1.78 V) in accordance with HOMOdonor-LUMOPC61BM by designed compounds when compared with BDD-IN (1.28 V). Similarly, lower reorganization energy values were exhibited by the designed compounds in the range of λe(0.00285-0.00370 Eh) and λh(0.00847-0.00802 Eh) than BDD-IN [λe(0.00700 Eh) and λh(0.00889 Eh)]. These measurements show that the designed compounds are promising candidates for incorporation into solar cell devices, which would benefit from better hole and electron mobility.

Molecular engineering of indenoindene-3-ethylrodanine acceptors with A2-A1-D-A1-A2 architecture for promising fullerene-free organic solar cells

Considering the increased demand and potential of photovoltaic devices in clean, renewable electrical and hi-tech applications, non-fullerene acceptor (NFA) chromophores have gained significant attention. Herein, six novel NFA molecules IBRD1-IBRD6 have been designed by structural modification of the terminal moieties from experimentally synthesized A2-A1-D-A1-A2 architecture IBR for better integration in organic solar cells (OSCs). To exploit the electronic, photophysical and photovoltaic behavior, density functional theory/time dependent-density functional theory (DFT/TD-DFT) computations were performed at M06/6-311G(d,p) functional. The geometry, electrical and optical properties of the designed acceptor molecules were compared with reported IBR architecture. Interestingly, a reduction in bandgap (2.528-2.126 eV), with a broader absorption spectrum, was studied in IBR derivatives (2.734 eV). Additionally, frontier molecular orbital findings revealed an excellent transfer of charge from donor to terminal acceptors and the central indenoindene-core was considered responsible for the charge transfer. Among all the chromophores, IBRD3 manifested the lowest energy gap (2.126 eV) with higher λmax at 734 and 745 nm in gaseous phase and solvent (chloroform), respectively due to the strong electron-withdrawing effect of five end-capped cyano groups present on the terminal acceptor. The transition density matrix map revealed an excellent charge transfer from donor to terminal acceptors. Further, to investigate the charge transfer and open-circuit voltage (Voc), PBDBT donor polymer was blended with acceptor chromophores, and a significant Voc (0.696-1.854 V) was observed. Intriguingly, all compounds exhibited lower reorganization and binding energy with a higher exciton dissociation in an excited state. This investigation indicates that these designed chromophores can serve as excellent electron acceptor molecules in organic solar cells (OSCs) that make them attractive candidates for the development of scalable and inexpensive optoelectronic devices.

de la Torre A, Khan MU, Raza AR, Kamal GM, Rehman MF, Alam MM, Imran M, Braga AA, Pertino MW. Facile Synthesis of Diversely Functionalized Peptoids, Spectroscopic Characterization, and DFT-Based Nonlinear Optical Exploration

Compounds having nonlinear optical (NLO) characteristics have been proved to have a significant role in many academic and industrial areas; particularly, their leading role in surface interfaces, solid physics, materials, medicine, chemical dynamics, nuclear science, and biophysics is worth mentioning. In the present study, novel peptoids (1-4) were prepared in good yields via Ugi four-component reaction (Ugi-4CR). In addition to synthetic studies, computational calculations were executed to estimate the molecular electrostatic potential, natural bond orbital (NBO), frontier molecular orbital analysis, and NLO properties. The NBO analysis confirmed the stability of studied systems owing to containing intramolecular hydrogen bonding and hyperconjugative interactions. NLO analysis showed that investigated molecules hold noteworthy NLO response as compared to standard compounds that show potential for technology-related applications.

Exploration of efficient electron acceptors for organic solar cells: rational design of indacenodithiophene based non-fullerene compounds

The global need for renewable sources of energy has compelled researchers to explore new sources and improve the efficiency of the existing technologies. Solar energy is considered to be one of the best options to resolve climate and energy crises because of its long-term stability and pollution free energy production. Herein, we have synthesized a small acceptor compound (TPDR) and have utilized for rational designing of non-fullerene chromophores (TPD1-TPD6) using end-capped manipulation in A2-A1-D-A1-A2 configuration. The quantum chemical study (DFT/TD-DFT) was used to characterize the effect of end group redistribution through frontier molecular orbital (FMO), optical absorption, reorganization energy, open circuit voltage (Voc), photovoltaic properties and intermolecular charge transfer for the designed compounds. FMO data exhibited that TPD5 had the least ΔE (1.71 eV) with highest maximum absorption (λmax) among all compounds due to the four cyano groups as the end-capped acceptor moieties. The reorganization energies of TPD1-TPD6 hinted at credible electron transportation due to the lower values of λe than λh. Furthermore, open circuit voltage (Voc) values showed similar amplitude for all compounds including parent chromophore, except TPD4 and TPD5 compounds. These designed compounds with unique end group acceptors have the potential to be used as novel fabrication materials for energy devices.

Role of acceptor guests in tuning optoelectronic properties of benzothiadiazole core based non-fullerene acceptors for high-performance bulk-heterojunction organic solar cells

Recently, end-capped acceptors tailoring approach has attracted many researchers because of unceasing higher power conversion efficiencies (PCEs) of resulted compounds. By keeping in view, the crucial role of NFAs in bulk-heterojunction OSCs, herein, we molecularly engineered five new non-fullerene acceptor materials (Y6A1-Y6A5) by modifying a recently synthesized Y6 molecule (R), having 18% power conversion efficiency when combined with D18 donor polymer. The structural-elemental connection, physical-chemical, optoelectronic, and photovoltaic characteristics of novel deigned and reference material (R) are studied with advanced quantum-chemical modulations. Density functional theory and time dependent-density functional theory has been employed through various basis sets to investigate the designed molecules theoretically. Interestingly, all of the newly modeled materials displayed lower excitation energies with lower HOMO-LUMO energy-gaps in-contrast with R molecule. Moreover, a red-shifted absorption and lower reorganizational energies of electron and hole are also a novel feature of these designed materials. The lower binding energy values of modeled materials offers better charge separation and high photo-current density (J_sc) as compared to R. Transition density analysis, open circuit voltage, and molecular electrostatic potential analysis suggested that end-capped acceptors alteration of R molecule is an efficient approach for tuning the optoelectronic properties of non-fullerene-based acceptor molecules (Y6A1-Y6A5). In last, composite study of donor: acceptor (D18:Y6A2) complex has also been carried-out to realize the charge transfer process at the donor-acceptor interface. After all investigations, we hope that our theoretical modeled materials are superior than Y6 molecule, therefore, we endorse these materials for the synthesis to prepare highly-efficient BHJ-OSCs devices.

Key Electronic, Linear and Nonlinear Optical Properties of Designed Disubstituted Quinoline with Carbazole Compounds

Organic materials development, especially in terms of nonlinear optical (NLO) performance, has become progressively more significant owing to their rising and promising applications in potential photonic devices. Organic moieties such as carbazole and quinoline play a vital role in charge transfer applications in optoelectronics. This study reports and characterizes the donor-acceptor-donor-π-acceptor (D-A-D-π-A) configured novel designed compounds, namely, Q3D1-Q3D3, Q4D1-Q1D2, and Q5D1. We further analyze the structure-property relationship between the quinoline-carbazole compounds for which density functional theory (DFT) and time-dependent DFT (TDDFT) calculations were performed at the B3LYP/6-311G(d,p) level to obtain the optimized geometries, natural bonding orbital (NBO), NLO analysis, electronic properties, and absorption spectra of all mentioned compounds. The computed values of λmax, 364, 360, and 361 nm for Q3, Q4, and Q5 show good agreement of their experimental values: 349, 347, and 323 nm, respectively. The designed compounds (Q3D1-Q5D1) exhibited a smaller energy gap with a maximum redshift than the reference molecules (Q3-Q5), which govern their promising NLO behavior. The NBO evaluation revealed that the extended hyperconjugation stabilizes these systems and caused a promising NLO response. The dipole polarizabilities and hyperpolarizability (β) values of Q3D1-Q3D3, Q4D1-Q1D2, and Q5D1 exceed those of the reference Q3, Q4, and Q5 molecules. These data suggest that the NLO active compounds, Q3D1-Q3D3, Q4D1-Q1D2, and Q5D1, may find their place in future hi-tech optical devices.