Natural clay-supported palladium catalysts for methane oxidation reaction: effect of alloying

Transfer hydrogenation of ketone; an in situ approach toward an eco-friendly reduction

The use of water as a solvent in chemical reactions has recently been brought to public attention, especially in the exploration of eco-friendly procedures. It is readily available, abundantly accessible, non-toxic, non-flammable, and at a low cost. As opposed to the previous limitation of reactant solubilities associated with aqueous media, a hydrogel such as a hydroxypropyl methylcellulose (HPMC) solution can significantly improve the reactant solubility. This investigation employed water and HPMC as the reaction solvent, and the reaction medium viscosity was impressively enhanced. Silica-supported Pd particles (Pd@SiO₂) were synthesized and effectively catalyzed the reduction of acetophenone in the presence of sodium borohydride (NaBH₄) as the hydrogen source. The conversion of acetophenone to 1-phenyl ethanol remained at a very high value of >99.34% with 100% selectivity towards 1-phenyl ethanol.

The use of water as a solvent in chemical reactions has recently been brought to public attention, especially in the exploration of eco-friendly procedures.

A sustainable gateway to access 1,8-dioxo-octahydroxanthene scaffolds via a surface-engineered halloysite-based magnetically responsive catalyst

A covalently modified, surface-engineered Cu(ii)@DCH@CPTMS@MHNT nanocatalyst is synthesized, which showed incredible catalytic activity in accessing a library of xanthene scaffolds.

Clay nanotube-metal core/shell catalysts for hydroprocesses

Catalytic hydroprocesses play a significant role in oil refining and petrochemistry. The tailored design of new metal nanosystems and optimization of their support, composition, and structure is a prospective strategy for enhancing the efficiency of catalysts. Mesoporous support impacts the active component by binding it to the surface, which leads to the formation of tiny highly dispersed catalytic particles stabilized from aggregation and with minimized leaching. The structural and acidic properties of the support are crucial and determine the size and dispersion of the active metal phase. Currently, research efforts are shifted toward the design of nanoscale porous materials, where homogeneous catalysts are displaced by heterogeneous. Ceramic materials, such as 50 nm diameter natural halloysite nanotubes, are of special interest for this. Much attention to halloysite clay is due to its tubular structure with a hollow 10-15 nm diameter internal cavity, textural characteristics, and different chemical compositions of the outer/inner surfaces, allowing selective nanotube modification. Loading halloysite with metal particles or placing them outside the tubes provides stable and efficient mesocatalysts. The low cost of this abundant nanoclay makes it a good choice for the scaled-up architectural design of core-shell catalysts, containing active metal sites (Au, Ag, Pt, Ru, Co, Mo, Fe₂O₃, CdS, CdZnS, Cu-Ni) located inside or outside the tubular template. These alumosilicate nanotubes are environment-friendly and are available in thousands of tons. Herein, we summarized the advances of halloysite-based composite materials for hydroprocesses, focusing on the selective binding of metal particles. We analyze the tubes' morphology adjustments and size selection, the physicochemical properties of pristine and modified halloysite (e.g., acid-etched or silanized), the methods of metal clusters formation, and their localization. We indicate prospective routes for the architectural design of stable and efficient nanocatalysts based on this safe and natural clay material.

Nanoparticles Supported on Sub-Nanometer Oxide Films: Scaling Model Systems to Bulk Materials

Ultrathin layers of oxides deposited on atomically flat metal surfaces have been shown to significantly influence the electronic structure of the underlying metal, which in turn alters the catalytic performance. Upscaling of the specifically designed architectures as required for technical utilization of the effect has yet not been achieved. Here, we apply liquid crystalline phases of fluorohectorite nanosheets to fabricate such architectures in bulk. Synthetic sodium fluorohectorite, a layered silicate, when immersed into water spontaneously and repulsively swells to produce nematic suspensions of individual negatively charged nanosheets separated to more than 60 nm, while retaining parallel orientation. Into these galleries oppositely charged palladium nanoparticles were intercalated whereupon the galleries collapse. Individual and separated Pd nanoparticles were thus captured and sandwiched between nanosheets. As suggested by the model systems, the resulting catalyst performed better in the oxidation of carbon monoxide than the same Pd nanoparticles supported on external surfaces of hectorite or on a conventional Al2 O3 support. XPS confirmed a shift of Pd 3d electrons to higher energies upon coverage of Pd nanoparticles with nanosheets to which we attribute the improved catalytic performance. DFT calculations showed increasing positive charge on Pd weakened CO adsorption and this way damped CO poisoning.

Nanopartikel auf subnanometer dünnen oxidischen Filmen: Skalierung von Modellsystemen

Durch die Abscheidung von ultradünnen Oxidschichten auf atomar‐flachen Metalloberflächen konnte die elektronische Struktur des Metalls und hierdurch dessen katalytische Aktivität beeinflusst werden. Die Skalierung dieser Architekturen für eine technische Nutzbarkeit war bisher aber kaum möglich. Durch die Verwendung einer flüssigkristallinen Phase aus Fluorhectorit‐Nanoschichten, können wir solche Architekturen in skalierbarem Maßstab imitieren. Synthetischer Natriumfluorhectorit (NaHec) quillt spontan und repulsiv in Wasser zu einer nematischen flüssigkristallinen Phase aus individuellen Nanoschichten. Diese tragen eine permanente negative Schichtladung, sodass selbst bei einer Separation von über 60 nm eine parallele Anordnung der Schichten behalten wird. Zwischen diesen Nanoschichten können Palladium‐Nanopartikel mit entgegengesetzter Ladung eingelagert werden, wodurch die nematische Phase kollabiert und separierte Nanopartikel zwischen den Schichten fixiert werden. Die Aktivität zur CO‐Oxidation des so entstandenen Katalysators war höher als z. B. die der gleichen Nanopartikel auf konventionellem Al2O3 oder der externen Oberfläche von NaHec. Durch Röntgenphotoelektronenspektroskopie konnte eine Verschiebung der Pd‐3d‐Elektronen zu höheren Bindungsenergien beobachtet werden, womit die erhöhte Aktivität erklärt werden kann. Berechnungen zeigten, dass mit erhöhter positiver Ladung des Pd die Adsorptionsstärke von CO erniedrigt und damit auch die Vergiftung durch CO vermindert wird.

Enhancing the Catalytic Activity of Palladium Nanoparticles via Sandwich-Like Confinement by Thin Titanate Nanosheets

As atomically thin oxide layers deposited on flat (noble) metal surfaces have been proven to have a significant influence on the electronic structure and thus the catalytic activity of the metal, we sought to mimic this architecture at the bulk scale. This could be achieved by intercalating small positively charged Pd nanoparticles of size 3.8 nm into a nematic liquid crystalline phase of lepidocrocite-type layered titanate. Upon intercalation the galleries collapsed and Pd nanoparticles were captured in a sandwichlike mesoporous architecture showing good accessibility to Pd nanoparticles. On the basis of X-ray photoelectron spectroscopy (XPS) and CO diffuse reflectance Fourier transform infrared spectroscopy (DRIFTS) Pd was found to be in a partially oxidized state, while a reduced Ti species indicated an electronic interaction between nanoparticles and nanosheets. The close contact of titanate sandwiching Pd nanoparticles, moreover, allows for the donation of a lattice oxygen to the noble metal (inverse spillover). Due to the metal-support interactions of this peculiar support, the catalyst exhibited the oxidation of CO with a turnover frequency as high as 0.17 s-1 at a temperature of 100 °C.

A Sustainable Palladium-Intercalated Montmorillonite Clay Catalytic System for Imine Hydrogenation under Mild Conditions

A series of palladium nanoparticles (Pd NPs) intercalated montmorillonite clay catalysts is reported for hydrogenation of 3-diphenyl prop-2-en-1-imine under mild reaction conditions. Pd/clay catalyst was prepared by a simple wet-impregnation method, and the physicochemical properties were characterized extensively by various techniques including N₂ adsorption, XRD, TEM, XPS and TPR etc., which showed the intercalation of active Pd NPs between the clay layers. The effect of reaction conditions such as catalyst loading, reaction time, temperature and H₂ pressure is explored, and thereby a plausible mechanism is proposed. The optimum amount of 6 wt % Pd/clay catalyst showed significant catalytic activity to yield 3-phenyl propyl aniline with 100 % conversion and selectivity under 5 bar pressure and a shorter reaction period of 3.5 h at 100 °C. The developed catalytic system unveiled excellent reusability over five cycles and hence paved the way for industrial applications.