Three-dimensional microspheric g-C3N4 coupled by Broussonetia papyrifera biochar: facile sodium alginate immobilization and excellent photocatalytic Cr(iv) reduction

Adsorption and catalytic reduction of hexavalent chromium based on nanomaterials: A review on metal, metallic oxide, metallic sulfide and carbon-based catalyst

Chromium (Cr) is widely recognized as a significant environmental contaminant and a major contributor to global pollution. As a result, there is a strong emphasis on developing effective methods for the removal and reduction of Cr(VI). This review examines various applications of nanomaterial catalysts, including metallic oxides, metals, metallic sulfides, and carbon-based materials. These materials encompass naturally occurring substances, synthetically produced compounds, and artificially modified forms, all of which typically exhibit favorable adsorption properties and catalytic activity. We systematically summarize the mechanisms of adsorption and catalytic reduction associated with these nanomaterials, including photocatalysis, electrocatalysis, and direct catalysis. Finally, we explore the future directions and prospects of nanomaterials in environmental remediation, highlighting the key challenges that must be addressed in this field.

Biochar supported Pseudomonas putida based globules for effective removal of Bisphenol A with a practical approach

The widespread and inevitable use of plastic has led to prospective ecological problems through Bisphenol A (BPA), a synthetic chemical in plastic manufacturing. The present study addresses a unique methodology for eliminating BPA using the assistance of Pseudomonas putida. In the present work, biomass was torrefied to generate biochar with highly porous networks that could accommodate the bacterial species for effective colonization and multiplication. The designed biochar-bacterial globules demonstrated the ability to effectively remove BPA (96.88%) at a concentration of up to 2 g/L. The biochar-bacterial globules could effectively adsorb BPA at a low concentration of 20 mg/L. The alteration in pH did not impact the globule's performance, providing additional support for the practical utilization of these globules in polluted water bodies. In addition, the biochar-bacterial globules exhibited superior effectiveness in degradation compared to the standard levels, particularly in saline conditions. The simplicity and effectiveness of the approach make it promising for real-world implementation in addressing ecological problems associated with BPA contamination.

Preparation of environmental remediation material based on manganese-slag and sewage sludge as a strategy for remediation of cadmium pollution

Both manganese-slag and sewage sludge are typical solid wastes, but their utilization is limited. Based on the soil properties, the abovementioned pollutants were combined with Broussonetia papyrifera to treat soil cadmium (Cd) pollution. Three materials (sewage sludge-derived biochar (SSB), Mn-SSB, and Mn-slag (Slag)) were prepared using oxygen-limited pyrolysis technology with Slag and sewage sludge, and the effects of the three materials on the phytoremediation of Cd-polluted soil were investigated. All three materials had distinct morphological characteristics, good functional group structure, specific surface area, and porosity. The adsorption and leaching experiments in the solution indicated that the three materials could not only directly absorb Cd2+ but also release nutrients, such as nitrogen and phosphorus. The soil pH increased significantly (p < 0.05) with the addition of the above environmental remediation materials. Furthermore, the contents of soil organic carbon, available nitrogen, and available phosphorus in soil increased significantly, whereas the electrical conductivity of the soil decreased significantly (p < 0.05). During remediation of Cd-polluted soil by integrating the above materials with B. papyrifera, Slag significantly increased the B. papyrifera biomass, but the effects of SSB and Mn-SSB were not significant. SSB, Mn-SSB, and Slag significantly increased the protein content of B. papyrifera leaves, with Mn-SSB having the most significant effect (p < 0.05). The applications of SSB, Mn-SSB, and Slag reduced the malondialdehyde content and increased the activities of superoxide dismutase and peroxidase, reducing the damage to B. papyrifera. Mn-SSB significantly reduced the Cd content in the roots, stems, and leaves of B. papyrifera, and SSB and Slag promoted Cd enrichment in B. papyrifera. This study realized the comprehensive utilization of Mn-slag and sewage sludge and established a recycling system from solid waste to the treatment of waste soil.

Fabrication of a Nanosized g-C3N4-Loaded Cellulose Microfiber Bundle to Induce Highly Efficient Water Treatment via Photodegradation

Graphite carbon nitride (g-C3N4) with a suitable structure and strong amine activity is designed and prepared to serve as a hydrogen bond donor for the microfibrilization of corncob cellulose to form a cellulose microfiber (CMF) bundle. Simultaneously, well-dispersed nanosized g-C3N4 is loaded into the bundle to form a photocatalyst for efficient photodegradation of rhodamine B (Rh B) in water. Under the optimal preparation conditions at 165 °C, 10 min, and 0.08 mol/L H2SO4, the yield of g-C3N4-functionalized cellulose microfibers (CMF-g-C3N4) reaches to the highest over 70%. The catalytic rate of CMF-g-C3N4 is 3.3 times larger than that of pure g-C3N4. The degradation rate of Rh B is maintained at over 90% in 10 cycles of photocatalytic degradation. The obtained CMF-g-C3N4 also has good thermal stability and mechanical properties. This research suggests a particularly simple way to transform cellulose into a highly efficient photocatalyst for water treatment.

Comprehensive review on advanced reusability of g-C3N4 based photocatalysts for the removal of organic pollutants

Graphitic carbon nitride (g-C₃N₄) has attained significant research attention in energy and environmental remediation due to its excellent electronic structure, greater physical and chemical properties, and abundance. However, graphitic carbon nitride faces severe problems because of its high recombination rate and higher mass loss of the catalyst during recovery operations. This review emphasizes the methods to overcome the difficulties associated with recovery and reusability of the g-C₃N₄ based photocatalyst towards the redemption of pollutants present in wastewater. Different strategies like magnetic g-C₃N₄ based photocatalysts, immobilized photocatalytic systems, and photocatalytic membranes and their usage in photocatalytic applications are well described. Different preparation strategies of the graphic carbon nitride-based composites are elucidated. The key challenges and future perspectives of adopting these methods for photocatalytic applications are also mentioned.

Core-shell P-laden biochar/ZnO/g-C3N4 composite for enhanced photocatalytic degradation of atrazine and improved P slow-release performance

Technologies that can effectively address the environmental issues arisen from the use of agrochemicals and P fertilizers are needed for the development of green agriculture. Here, we reporta new core-shell P-laden biochar/ZnO/g-C₃N₄ composite (Pbi-ZnO-g-C₃N₄) used both as an efficient photocatalyst for degrading atrazine and a promising slow-release fertilizer for improving the P utilization efficiency. In comparison with P-laden biochar/ZnO (Pbi-ZnO), Pbi-ZnO-g-C₃N₄ exhibits enhanced photocatalytic activity with the maximum atrazine degradation efficiency of 85.3% after 260 min. Pbi-ZnO-g-C₃N₄ also shows superior P slow-release performance with the cumulative P release concentration of 216.40 g/L in 260 min. Besides, it is found that the coating of g-C₃N₄ on the surface of Pbi-ZnO improves the utilization of visible light and separation of photoinduced electron-hole pairs, producing more radicals (•OH and •O₂^-) under visible light irradiation. The mechanistic study reveals that Z-shaped heterojunction is formed between ZnO and g-C₃N₄ in Pbi-ZnO-g-C₃N₄, and biochar serves as an electron-transfer bridge that promotes the separation of electron-hole pairs. Finally, pot experiments reveal that the P utilization efficiency for pepper seedlings fertilized by Pbi-ZnO-g-C₃N₄ is higher than that by Pbi-ZnO. The application of Pbi-ZnO-g-C₃N₄ is beneficial for the growth of native soil microorganism.

In-situ synthesis of biochar modified PbMoO4: An efficient visible light-driven photocatalyst for tetracycline removal

For highly efficient photocatalytic remediation of organic pollutants, broad-spectrum light response and effective charge separation are two key goals. To achieve these goals, a novel biochar (BC) modified PbMoO₄ composite catalyst was successfully synthesized in situ by combining coprecipitation with pyrolysis treatment of poplar sawdust and the technical feasibility of degradation of tetracycline (TC) with compound photocatalyst prepared from recovered agricultural and forestry residues was preliminarily demonstrated. The characterization demonstrated that the presence of BC narrowed the bandgap, enhanced visible light absorption as well as facilitated charge separation. Three composites (with the mass ratio of PbMoO₄ to BC = 1:4; 1:1; and 4:1, respectively) displayed higher activity than pure PbMoO₄. The results showed that the composite with the PbMoO₄ to BC ratio of 1:4 exhibited the best photocatalytic activity, for 150 mg L^-1 TC the removal rate was 61.0%, and the rate constant was 8.1 × 10^-3 min^-1, while the photocatalytic activity of PbMoO₄ was 26.0% and 3.9 × 10^-3 min^-1. The reactions in the presence of radical quenchers indicated that holes (h⁺) and superoxide radicals (O₂^-) were the dominant active species for photodegradation. In different water matrices, for 150 mg L^-1 TC solution the photocatalytic activity of optimal photocatalyst decreased as follows: ultrapure water > artificial sewage > farm sewage > municipal sewage. Moreover, the catalyst exhibited good stability over five cycles. Therefore, BC doped PbMoO₄ provides a useful strategy for improving the photocatalytic ability of PbMoO₄-based photocatalysts and offers a promising method for water purification.

Polysaccharide-based (nano)materials for Cr(VI) removal

Chromium is a potentially poisonous and carcinogenic species, which originates from human activities and various industries such as leather, steel, iron, and electroplating industries. Chromium is present in various oxidation states, among which hexavalent chromium (Cr(VI)) is highly toxic as a natural contaminant. Therefore, chromium, particularly Cr(VI), must be eliminated from the environment, soil, and water to overcome significant problems due to its accumulation in the environment. There are different approaches such as adsorption, ion exchange, photocatalytic reduction, etc. for removing Cr(VI) from the environment. By converting Cr(VI) to Cr(III), its toxicity is reduced. Cr(III) is essential for the human diet, even in small amounts. Today, biopolymers such as alginate, cellulose, gum, pectin, starch, chitin, and chitosan have received much attention for the removal of environmental pollutants. Biopolymers, particularly polysaccharides, are very useful compounds due to their OH and NH₂ functional groups and some advantages such as biodegradability, biocompatibility, and accessibility. Therefore, they can be widely applied in catalytic applications and as efficient adsorbents for the removal of toxic compounds from the environment. This review briefly investigates the application of polysaccharide-based (nano)materials for efficient Cr(VI) removal from the environment using adsorption/reduction, photocatalytic, and chemical reduction mechanisms.

Boosting charge separation and nitrogen vacancies in graphitic carbon nitride by implanted strontium vanadate for highly efficient photocatalytic reduction of hexavalent chromium

Strontium vanadate nanoparticles embedded graphitic carbon nitride (g-C₃N₄/Sr₂V₂O₇) was facilely prepared in situ via a hydrothermal method. It was shown that the Sr₂V₂O₇ nanoparticles implanted into g-carbon nitride had a small size and high distribution. Importantly, compared with some other photocatalysts, the as-prepared g-C₃N₄/Sr₂V₂O₇ nanohybrid showed excellent photocatalytic activity for reduction of Cr(vi), and as high as 99% efficiency for Cr(vi) reduction (100 mg L⁻¹) was reached within 8 min. Moreover, its activity was hardly changed after five cycles, demonstrating that the developed g-C₃N₄/Sr₂V₂O₇ nanohybrid was highly stable and promising an efficacious disposal of Cr(vi) in water. It was confirmed that the improved charge separation owing to more nitrogen vacancies in the hybrid was the main reason for the improved performance of the g-C₃N₄-Sr₂V₂O₇ nanohybrid.

A well-dispersed strontium vanadate implanted into graphitic carbon nitride showed excellent photocatalytic activity for Cr(vi) reduction. The improved charge separation owing to more nitrogen vacancies was the main reason for its enhanced activity.

A 3D nitrogen-doped graphene aerogel for enhanced visible-light photocatalytic pollutant degradation and hydrogen evolution

The synergistic effect of the 3D structure and N-doping explain the high surface area of 536 m² g⁻¹ and excellent photocatalytic activity.