Near-infrared aggregation-induced enhanced electrochemiluminescence from tetraphenylethylene nanocrystals: a new generation of ECL emitters

Dual emitting aggregation-induced electrochemiluminescence from tetrastyrene derivative for chloramphenicol detection

Chloramphenicol (CAP) poses a threat to human health due to its toxicity and bioaccumulation, and it is very important to measure it accurately and sensitively. This work explored a host-guest recognition strategy to mediate dual aggregation-induced electrochemiluminescence (AIECL) of 1,1,2,2-tetrakis(4-(pyridin-4-yl) phenyl)-ethene (TPPE) for ratio detection of CAP, in which, cucurbit[8]uril (CB[8]) served as host to assemble guest TPPE. The resulting supramolecular complex CB[8]-TPPE exhibited excellent dual-AIECL-emission with signal strength approximately four times that of TPPE aggregates and black hole quencher-1 (BHQ1) could efficiently quench dual-AIECL signal. CB[8]-TPPE coupled dual-function quencher BHQ1 and high-efficiency DNA reactor to achieve ultra-sensitive detection of CAP, exhibiting a linearity range of 10 fmol·L-1-100 nmol·L-1 and limit of detection of 1.81 fmol·L-1. CB[8]-TPPE provides a novel way to improve the dual-emission of TPE derivatives and sets up a promising platform for CAP detection, demonstrating a good practical application potential.

Aggregation-induced electrochemiluminescence based on intramolecular charge transfer and twisted molecular conformation for label-free Immunoassay

Organic emitters with exceptional properties exhibit significant potential in the field of aggregation-induced electrochemiluminescence (AIECL); however, their practicality is impeded by limited ECL efficiency (ΦECL). This paper investigates a novel type of AIECL emitter (BDPPA NPs), where an efficient intramolecular charge transfer (ICT) effect and highly twisted conformation contribute to a remarkable enhancement of ECL. The ICT effect reduces the electron transfer path, while the twisted conformation effectively restricts π-π stacking and intramolecular motions. Intriguingly, compared to the standard system of [Ru(bpy)32+]/TPrA, bright emissions with up to 54 % ΦECL were achieved, enabling direct visual observation of ECL through the co-reactant route. The label-free immunosensor exhibited distinguished performance in detecting SARS-CoV-2 N protein across an exceptionally wide linear range of 0.001-500 ng mL-1, with a remarkably low detection limit of 0.28 pg mL-1. Furthermore, this developed ECL platform exhibited excellent sensitivity, specificity, and stability characteristics, providing an efficient avenue for constructing platforms for bioanalysis and clinical diagnosis analysis.

Near infra-red luminescent osmium labelled gold nanoparticles for cellular imaging and singlet oxygen generation

Osmium(II) complexes have attractive properties for potential theranostic agents given their anticancer activitiy, their redox potentials favourable for biological transformations within cancer cells and their luminescence in the near infrared (NIR) region. To achieve localised detection and delivery, gold nanoparticles (AuNP) provide an attractive scaffold to attach multiple luminescent agents on a single particle and provide a multimodal platform for detection and loaclaised delivery. We have developed 13 nm and 25 nm AuNP decorated with an osmium complex based on 1,10-phenantholine and surface active bipyridine ligands, OsPhenSS for live cell imaging and singlet oxygen generation, notated as OsPhenSS·AuNP13 and OsPhenSS·AuNP25. The AuNP designs not only allow versatile modalities for localisation of the probe but also water solubility for the osmium metal complex. The osmium decorated nanoparticles OsPhenSS·AuNP13 and OsPhenSS·AuNP25 display characteristic NIR luminescence from the osmium(II) 3MLCT at 785 nm in aqueous solutions with visible excitation. Upon incubation of the nanoparticles in lung cancer and breast carcinoma the luminescence signature of osmium and the gold reflectance reveal localisation in the cytoplasmic and perinuclear compartments. Excitation of the nanoparticles at 552 nm in the presence of a ROS indicator revealed a marked increase in the green fluorescence from the indicator, consistent with photo-induced ROS generation. The detection of singlet oxygen by time-resolved luminescence studies of the osmium and the nanoparticle probes further demonstrates the dual activity of the osmium-based nanoprobes for imaging and therapy. The introduction of gold nanoparticles for carrying osmium imaging probes allows a novel versatile strategy combining detection and localised therapies at the nanoscale.

Highly Electroactive Co2+-Based Metal-Organic Frameworks as an Efficient Coreaction Accelerator for Amplifying Near-Infrared Electrochemiluminescence of Gold Nanoclusters in Biomarkers Immunoassay

Metal nanoclusters (NCs) as a new kind of luminophore have acquired sufficient interest, but their widespread application is restricted on account of their relatively low electrochemiluminescence (ECL) efficiency. Then, aqueous metal NCs with high ECL efficiency were strongly anticipated, especially for the ultrasensitive analysis of biomarkers. Herein, a near-infrared (NIR) ECL biosensing strategy for the test of neuron-specific enolase (NSE) was proposed by utilizing N-acetyl-l-cysteine (NAC)- and cysteamine (Cys)-stabilized gold NCs (NAC/Cys-AuNCs) as ECL emitters with the NIR ECL emission around 860 nm and a metal-organic framework/palladium nanocubes (ZIF-67/PdNCs) hybrid as the coreaction accelerator through their admirable electrocatalytic activity. The NIR emission would reduce photochemical injury to the samples and even realize nondestructive analysis with highly strong susceptibility and suitability. Furthermore, the utilization of ZIF-67/PdNCs could improve the ECL response of NAC/Cys-AuNCs by facilitating the oxidation of the coreactant triethylamine (TEA), leading to the production of a larger quantity of reducing intermediate radical TEA•+. Consequently, NAC/Cys-AuNCs with ZIF-67/PdNCs displayed 2.7 fold enhanced ECL emission compared with the single NAC/Cys-AuNCs using TEA as the coreactant. In addition, HWRGWVC (HWR), a heptapeptide, was introduced to immobilize antibodies for the specially binding Fc fragment of the antibodies, which improved the binding efficiency and sensitivity. As a result, a "signal-on" immunosensor for NSE analysis was obtained with an extensive linear range of 0.1 to 5 ng/mL and a low limit of detection (0.033 fg/mL) (S/N = 3). This study provides a wonderful method for the development of an efficient nondestructive immunoassay.

Solvent Regulation Induced Cathode Aggregation-Induced Electrochemiluminescence of Tetraphenylethylene Nanoaggregates for Ultrasensitive Zearalenone Analysis

Zearalenone (ZEN) is an extremely hazardous chemical widely existing in cereals, and its high-sensitivity detection possesses significant significance to human health. Here, the cathodic aggregation-induced electrochemiluminescence (AIECL) performance of tetraphenylethylene nanoaggregates (TPE NAs) was modulated by solvent regulation, based on which an electrochemiluminescence (ECL) aptasensor was constructed for sensitive detection of ZEN. The aggregation state and AIECL of TPE NAs were directly and simply controlled by adjusting the type of organic solvent and the fraction of water, which solved the current shortcomings of low strength and weak stability of the cathode ECL signal for TPE. Impressively, in a tetrahydrofuran-water mixed solution (volume ratio, 6:4), the relative ECL efficiency of TPE NAs reached 16.03%, which was 9.2 times that in pure water conditions, and the maximum ECL spectral wavelength was obviously red-shifted to 617 nm. In addition, "H"-shape DNA structure-mediated dual-catalyzed hairpin self-assembly (H-D-CHA) with higher efficiency by the synergistic effect between the two CHA reactions was utilized to construct a sensitive ECL aptasensor for ZEN analysis with a low detection limit of 0.362 fg/mL. In conclusion, solvent regulation was a simple and efficient method for improving the performance of AIECL materials, and the proposed ECL aptasensor had great potential for ZEN monitoring in food safety.

Synthesis of silica-encapsulated tetraphenylethylene with aggregation-induced electrochemiluminescence resonance energy transfer for sensitively sensing microcystin-LR

The reported organic electrochemiluminescence (ECL) luminophors for the detection of various markers often suffer from intermolecular π-π stacking-induced luminophore quenching. Herein, we demonstrate one-pot synthesis of a new aggregation-induced electrochemiluminescence (AIECL) emitter (i.e., TPE@SiO2/rGO composite) for sensitive measurement of microcystin-leucine arginine (MC-LR). The TPE@SiO2/rGO composite is constructed by embedding the silica-encapsuled 1,1,2,2-tetra(4-carboxylphenyl)ethylene (TPE) in the reduced graphene oxide. In comparison with the monomer TPE, this composite exhibit high luminescence efficiency and strong ECL emission, because the AIECL phenomenon triggered by the spatial confinement effect in the SiO2 cage induces the restriction of the internal motion and vibration of molecules. Notably, this composite has distinct advantages of easy preparation, simple functionalization, and stable luminescence. Especially, the TPE@SiO2/rGO-based ECL-RET system exhibits a high quenching efficiency (ΦET) of 69.7%. When target MC-LR is present, it triggers DNA strand displacement reaction (SDR), inducing the quenching of the ECL signal of TPE@SiO2/rGO composite due to ECL resonance energy transfer between TPE@SiO2/rGO composite and methylene blue (MB). The proposed biosensor enables highly sensitive, low-cost, and robust measurement of MC-LR with a large dynamic range of 7 orders of magnitude and a detection limit of 3.78 fg/mL, and it displays excellent detection performance in complex biological matrices, holding potential applications in food safety and water monitoring.

Near-infrared electrochemiluminescence biosensors facilitated by thermally activated delayed fluorescence (TADF) emitters for ctDNA analysis

The near-infrared electrochemiluminescence technique (NIR ECL) has gained significant attention as a powerful analytical tool in biomedicine and clinical diagnosis due to its inherent advantages. In this work, we successfully synthesized a novel NIR ECL emitter of TPA-DCPP nanoparticles (NPs) with a D-π-A-π-D configuration. By utilizing the thermally activated delayed fluorescence (TADF) property, we achieved enhanced electrochemiluminescence (ECL) emission through complete exciton harvesting for radiative decay. Specifically, when BDEA was used as a co-reactant, the TPA-DCPP NPs exhibited strong bandgap ECL emission. Additionally, they demonstrated an exceptionally higher ECL efficiency compared to conventional near-infrared fluorescence organic nanomaterials (BSeT-BT NPs). By integrating the efficient anodic ECL performance of TPA-DCPP NPs with Exo III-assisted polymerase enzyme reaction cascade amplification, a highly efficient ECL resonance energy transfer (ECL-RET) platform was developed for ultrasensitive detection of circulating tumor DNA (ctDNA). The established biosensor demonstrated an exceptional linear dynamic range and achieved attomolar-level detection limit. This study highlights the immense potential of TADF emitters in enhancing ECL efficiency and extends the emission wavelength of organic nanomaterials to the NIR region, thereby expanding their applications in biological analysis.

Host-Guest Recognition-Mediated Supramolecular Aggregation-Induced Electrochemiluminescence of Iridium(III) Complexes for Nucleic Acid Bioassay

Currently reported aggregation-induced electroluminescence (AIECL) is usually based on the electrostatic integration of luminous monomers, and its application is still limited by the low ECL efficiency and poor structural stability of electrostatic integration-based AIECL emitters. Herein, host-guest recognition-mediated supramolecular AIECL was creatively developed to overcome the defects of electrostatic-integration-based AIECL. Cucurbit[8]uril (CB[8]) as the host recognized tris (2-phenylpyridine) iridium(III) [Ir(ppy)3] as the guest to form a novel supramolecular complex Ir-CB[8]. CB[8] can not only provide a large hydrophobic cavity to efficiently load Ir(ppy)3 and enrich coreactant tripropylamine but also utilize its carbonyl-laced portals to form intramolecular hydrogen bonds to stabilize the supramolecular structure, so Ir-CB[8] revealed excellent AIECL performance. The AIECL emitter Ir-CB[8] coupled the efficient DNA walker to construct a sensing system for miRNA-16 detection. Au nanoparticles@norepinephrine (AuNPs@NE) trapped by single-strand S1 was developed to significantly quench the ECL emission of Ir-CB[8]. When the target microRNA-16 (miRNA-16) existed, H1 was opened and the sequential assembly from H2 to H7 was triggered, forming "windmill"-like DNA walker with six Pb2+-dependent leg DNA. The assembled DNA walker, which was centered on DNA structure, had high efficiency and biocompatibility and can cut S1 to keep the DNA fragment-carrying quencher AuNPs@NE away from the electrode surface, thus restoring the ECL emission of Ir-CB[8] and realizing ultrasensitive detection of miRNA-16. Supramolecular AIECL mediated by host-guest recognition provides a new way for constructing AIECL emitters with excellent structural stability and AIECL efficiency, and an Ir-CB[8] coupling "windmill"-like DNA walker builds a promising ECL-sensing system for bioassay.

Self-Assembled Tetraphenylethene-Based Nanoaggregates with Tunable Electrochemiluminescence for the Ultrasensitive Detection of E. coli

As an effective ECL emitter, tetraphenylethene (TPE)-based molecules have recently been reported with aggregation-induced electrochemiluminescence (AIECL) property, while it is still a big challenge to control its aggregation states and obtain uniform aggregates with intense ECL emission. In this study, we develop three TPE derivatives carrying a pyridinium group, an alkyl chain, and a quaternary ammonium group via the Menschutkin reaction. The resulting molecules exhibit significantly red-shifted FL and enhanced ECL emissions due to the tunable reduction of the energy gap between the highest occupied molecular orbitals (HOMOs) and the lowest unoccupied molecular orbitals (LUMOs). More importantly, the amphiphilicity of the as-developed molecules enables their spontaneous self-assembly into well-controlled spherical nanoaggregates, and the ECL intensity of nanoaggregates with 3 -CH2- (named as C3) is 17.0-fold higher compared to that of the original 4-(4-(1,2,2-triphenylvinyl)phenyl)pyridine (TPP) molecule. These cationic nanoaggregates demonstrate a high affinity toward bacteria, and an ECL sensor for the profiling of Escherichia coli (E. coli) was developed with a broad linear range and good selectivity in the presence of an E. coli-specific aptamer. This study provides an effective way to enhance the ECL emission of TPE molecules through their derivatization and a simple way to prepare well-controlled AIECL nanoaggregates for ECL application.

Rigidifying AIEgens in covalent organic framework nanosheets for electrochemiluminescence enhancement: TABE-PZ-CON as a novel emitter for microRNA-21 detection

Enhancing electrochemiluminescence (ECL) properties of luminophores is a hot direction in the current ECL field. Herein, we found that covalent rigidification of the aggregation-induced emission luminogens (AIEgens) TABE (TABE = tetra-(4-aldehyde-(1,1-biphenyl))ethylene) into covalent organic framework nanosheets (TABE-PZ-CON, PZ = piperazine) could result in stronger ECL emission than those of TABE aggregates and TABE monomers. We termed the interesting phenomenon "covalent rigidification-triggered electrochemiluminescence (CRT-ECL) enhancement". The superior ECL performance of TABE-PZ-CON not only because massive TABE luminogens were covalently assembled into the rigid TABE-PZ-CON network, which limited the intramolecular motions of TABE and hampered the radiationless transition, but also because the ultrathin porous TABE-PZ-CON significantly reduced the transportation distance of ions, electrons, and coreactants, which enabled the electrochemical excitation of more TABE luminogens and thus enhanced the ECL efficiency. Bearing in mind the exceptional ECL performance of TABE-PZ-CON, it was utilized as a high-efficient ECL indicator in combination with the DNA walker and duplex-specific nuclease-assisted target recycling amplification strategies to design an "off-on" ECL biosensor for the ultrasensitive assay of microRNA-21, exhibiting a favorable response range (100 aM-1 nM) with an ultralow detection limit of 17.9 aM. Overall, this work offers a valid way to inhibit the intramolecular motions of AIEgens for ECL enhancement, which gives a new vision for building high-performance AIEgen-based ECL materials, thus offering more chances for assembling hypersensitive ECL biosensors.

Nanoscale Luminescence Imaging/Detection of Single Particles: State-of-the-Art and Future Prospects

Single-particle-level measurements, during the reaction, avoid averaging effects that are inherent limitations of conventional ensemble strategies. It allows revealing structure-activity relationships beyond averaged properties by considering crucial particle-selective descriptors including structure/morphology dynamics, intrinsic heterogeneity, and dynamic fluctuations in reactivity (kinetics, mechanisms). In recent years, numerous luminescence (optical) techniques such as chemiluminescence (CL), electrochemiluminescence (ECL), and fluorescence (FL) microscopies have been emerging as dominant tools to achieve such measurements, owing to their diversified spectroscopy principles, noninvasive nature, higher sensitivity, and sufficient spatiotemporal resolution. Correspondingly, state-of-the-art methodologies and tools are being used for probing (real-time, operando, in situ) diverse applications of single particles in sensing, medicine, and catalysis. Herein, we provide a concise and comprehensive perspective on luminescence-based detection and imaging of single particles by putting special emphasis on their basic principles, mechanistic pathways, advances, challenges, and key applications. This Perspective focuses on the development of emission intensities and imaging based individual particle detection. Moreover, several key examples in the areas of sensing, motion, catalysis, energy, materials, and emerging trends in related areas are documented. We finally conclude with the opportunities and remaining challenges to stimulate further developments in this field.

Co-Reactive Ligand In Situ Engineered Gold Nanoclusters with Ultra-Bright Near-Infrared Electrochemiluminescence for Ultrasensitive and Label-Free Detection of Carboxylesterase Activity

Ultrasensitive and accurate monitoring of carboxylesterase (CE) activity is extremely crucial for the early diagnosis of hepatocellular carcinoma (HCC), which is still a considerable challenge. Herein, using a co-reactive ligand engineering strategy, ultra-bright near-infrared (λmax = 830 nm) and self-enhanced electrochemiluminescence (ECL) Au nanoclusters (NCs) were in situ prepared with 2-(diethylamino) ethanethiol (DEAET) as a co-reactive ligand. Remarkably, the co-reactive ligand not only acts as a stabilizer like traditional ligands but also plays a crucial role as a co-reactant to ensure a confinement effect to shorten the charge transfer distance and increase the local concentration, significantly improving the collision efficiency between the electrogenerated free radicals. Consequently, the DEAET Au NCs exhibited a record and stable anodal ECL without the addition of an exogenous co-reactant, dramatically superior to classical Au NCs and Ru(bpy)32+ with a certain amount of the co-reactant. As a proof of concept, a convenient and label-free CE biosensor was innovatively constructed using 1-naphthyl acetate as a selective substrate, achieving ultrasensitive detection for CE activity with a low limit of detection of 9.1 × 10-7 U/L. Therefore, this work not only paves a co-reactive ligand engineering strategy for in situ preparation of high-efficiency metal NCs but also provides an ultrasensitive and convenient platform for the early diagnosis of HCC.

Dual-Mechanism-Driven Ratiometric Electrochemiluminescent Biosensor for Methicillin-Resistant Staphylococcus aureus

Design of a ratiometric method is a promising pathway to improve the sensitivity and reliability of electrochemiluminescent (ECL) assay, for which the signals produced at two distinct potentials change reversely as it is applied to the target analyte. Herein, a biosensor for ECL assay of methicillin-resistant Staphylococcus aureus (MRSA) was constructed by immobilizing porcine IgG for capturing MRSA onto an electrode that was precoated with β-cyclodextrin-conjugated luminol nanoparticles (β-CD-Lu NPs) as an anodic luminophore. MOF PCN 224 loaded with an atomically distributed Zn element (PCN 224/Zn) was conjugated with phage recombinant cellular-binding domain (CBD) to act as a cathodic luminophore for tracing MRSA. After the formation of the sandwich complex of β-CD-Lu NPs-porcine IgG/MRSA/PCN 224/Zn-CBD on the biosensor, two ECL reactions were triggered with cyclic voltammetry. The anodic process of the β-CD-Lu NPs-H2O2 system and the cathodic process of the PCN 224/Zn-S2O82- system competed to react with reactive oxygen species (ROS) for producing ECL emission, which led to a reverse change of the two signals. Meanwhile, the overlap of the β-CD-Lu NPs emission spectrum and PCN 224/Zn absorption spectrum effectively triggered ECL resonance energy transfer between the donor (β-CD-Lu NPs) and the acceptor (PCN 224/Zn). Thus, a ratiometric ECL method was proposed for assaying MRSA with a dual-mechanism-driven mode. The detection limit for assaying MRSA is as low as 12 CFU/mL. The biosensor was applied to assay MRSA in various biological samples with recoveries ranging from 84.9 to 111.3%.

Near-infrared II aggregation-induced electrochemiluminescence of organic dots

For the first time, we report novel aggregation-induced electrochemiluminescence (AIECL) of organic dots in aqueous media, with near-infrared II (NIR-II) luminescence peaked at 906 nm. Furthermore, a hybrid mechanism of ECL generation is revealed by various experiments in conjunction with theoretical calculations. This work opens a window for exploring efficient organic dye-based NIR-II AIECL emitters.

Electrochemiluminescence enhanced by isolating ACQphores in imine-linked covalent organic framework for organophosphorus pesticide assay

Most of covalent organic frameworks (COFs) are non or weakly emissive due to either the molecular thermal motion-mediated energy dissipation or the aggregation-caused quenching (ACQ) effect. Herein, we synthesize an imine-linked COF (TFPPy-TPh-COF) with high electrochemiluminescence (ECL) emission and the capability of eliminating the ACQ effect and further construct an ECL sensor for malathion detection. The imine-linked COF is obtained by the condensation reaction of (1,1':3',1″-terphenyl)-4,4″-diamine (TPh) and 1,3,6,8-tetrakis(p-formylphenyl)pyrene (TFPPy), and it has higher ECL efficiency than TFPPy aggregates due to the separation of ACQ luminophores (i.e., TFPPy) from each other by TPh and the restriction of intramolecular motions of TFPPy and TPh to reduce the nonradiative decay. The efficient quenching of ECL is achieved by electrochemiluminescence resonance energy transfer (ERET) from the excited state of the TFPPy-TPh-COF to zeolite imidazolate framework-8 (ZIF-8) and the steric hindrance of ZIF-8. Acetylcholinesterase (AChE) can enzymatically hydrolyze acetylcholine (ACh) to generate acetic acid. The resultant acetic acid can trigger the dissolution of ZIF-8 to produce an enhanced ECL signal. Malathion as an organophosphorus pesticide serves as an AChE inhibitor to prevent the production of acetic acid, inducing the decrease of ECL signal. This sensor displays a limit of detection (LOD) of 2.44 pg/mL and a wide dynamic detection range of 0.01-1000 ng/mL. Furthermore, it can be used to detect other organophosphates pesticides (e.g., methidathion, chlorpyrifos, and paraoxon) and measure malathion in real samples (i.e., pakchoi, lettuce, and apples).

Precise Modulation of Intramolecular Aggregation-induced Electrochemiluminescence by Tetraphenylethylene-based Supramolecular Architectures

The precisely modulated synthesis of programmable light-emitting materials remains a challenge. To address this challenge, we construct four tetraphenylethylene-based supramolecular architectures (SA, SB, SC, and SD), revealing that they exhibit higher electrochemiluminescence (ECL) intensities and efficiencies than the tetraphenylethylene monomer and can be classified as highly efficient and precisely modulated intramolecular aggregation-induced electrochemiluminescence (PI-AIECL) systems. The best-performing system (SD) shows a high ECL cathodic efficiency exceeding that of the benchmark tris(2,2'-bipyridyl)ruthenium(II) chloride in aqueous solution by nearly six-fold. The electrochemical characterization of these architectures in an organic solvent provides deeper mechanistic insights, revealing that SD features the lowest electrochemical band gap. Density functional theory calculations indicate that the band gap of the guest ligand in the SD structure is the smallest and most closely matched to that of the host scaffold. Finally, the SD system is used to realize ECL-based cysteine detection (detection limit=14.4 nM) in real samples. Thus, this study not only provides a precisely modulated supramolecular strategy allowing chromophores to be controllably regulated on a molecular scale, but also inspires the programmable synthesis of high-performance aggregation-induced electrochemiluminescence emitters.

Copper nanoclusters electrochemiluminescence with tunable near-infrared emission wavelength for ultrasensitive detection of matrix metalloproteinase-2

Herein, the methionine (Met)/N-acetyl-L-cysteine (NAC) templated copper nanoclusters (Met/NAC-Cu NCs) with tunable near-infrared region (NIR) electrochemiluminescence (ECL) emission wavelength was firstly synthesized as emitter for the ultrasensitive detection of matrix metalloproteinase-2 (MMP-2). Significantly, the NAC played the role of template and reductant of cupric to acquire Cu NCs, and the surface defect regulator Met was used to connect NAC through -S-S- bond, which could heighten the surface defect of Cu NCs to continuously regulate the maximum ECL emission by successively controlling the molar ratio of Met and NAC, leading to the ECL emission wavelength of Cu NCs ranged from 680 nm to 750 nm. In addition, a rapid target triggered catalyst hairpin assembly (CHA) recycling amplification strategy was constructed through orderly and equidistantly arranging hairpin to increase its local concentration, resulting in greatly accelerated signal amplification efficiency and reaction rate. As a proof of concept, based on Met/NAC-Cu NCs as NIR ECL emitter and effective signal amplification tactic, a super-sensitive ECL biosensor was fabricated to detect target MMP-2 with the detection limit (LOD) as low as 1.65 fg/mL and successfully utilized for detecting of MMP-2 that from Hela and MCF-7 cancer cells. This research provided a wonderful avenue for regulating the optical performance of metal nanoclusters-based ECL emitters, and the developed neoteric NIR ECL emitter with the merits of less photochemical damage and deeper tissue penetration exhibited great potential in ultrasensitive biosensing and high-definition ECL imaging.

Cascade Reaction Regulated Electrochemiluminescence via Dual-Atomic-Site Catalysts

Single-atom catalysts (SACs), a novel kind of electrocatalysts with full metal utilization, have been developed as unique signal amplifiers in several sensing platforms. Herein, based on theoretical prediction of the oxygen reduction reaction (ORR) mechanism on different atom sites, we constructed dual-atomic-site catalysts (DACs), Fe/Mn-N-C, to catalyze luminol-dissolved oxygen electrochemiluminescence (ECL). Computational simulation indicated that the weak adsorption of OH* on a single Fe site was overcome by introducing Mn as the secondary metallic active site, resulting in a synergic dual-site cascade mechanism. The superior catalytic activity of Fe/Mn-N-C DACs for the ORR was proven by the highly efficient cathodic luminol ECL, surpassing the performance of single-site catalysts (SACs), Fe-N-C and Mn-N-C. Furthermore, the ECL system, enhanced by a cascade reaction, exhibited remarkable sensitivity to ascorbic acid, with a detection limit of 0.02 nM. This research opens up opportunities for enhancing both the ECL efficiency and sensing performance by employing a rational atomic-scale design for DACs.

Newly Developed Electrochemiluminescence Based on Bipolar Electrochemistry for Multiplex Biosensing Applications: A Consolidated Review

Recently, there has been an upsurge in the extent to which electrochemiluminescence (ECL) working in synergy with bipolar electrochemistry (BPE) is being applied in simple biosensing devices, especially in a clinical setup. The key objective of this particular write-up is to present a consolidated review of ECL-BPE, providing a three-dimensional perspective incorporating its strengths, weaknesses, limitations, and potential applications as a biosensing technique. The review encapsulates critical insights into the latest and novel developments in the field of ECL-BPE, including innovative electrode designs and newly developed, novel luminophores and co-reactants employed in ECL-BPE systems, along with challenges, such as optimization of the interelectrode distance, electrode miniaturization and electrode surface modification for enhancing sensitivity and selectivity. Moreover, this consolidated review will provide an overview of the latest, novel applications and advances made in this field with a bias toward multiplex biosensing based on the past five years of research. The studies reviewed herein, indicate that the technology is rapidly advancing at an outstanding purse and has an immense potential to revolutionize the general field of biosensing. This perspective aims to stimulate innovative ideas and inspire researchers alike to incorporate some elements of ECL-BPE into their studies, thereby steering this field into previously unexplored domains that may lead to unexpected, interesting discoveries. For instance, the application of ECL-BPE in other challenging and complex sample matrices such as hair for bioanalytical purposes is currently an unexplored area. Of great significance, a substantial fraction of the content in this review article is based on content from research articles published between the years 2018 and 2023.

Self-Assembly of the Tetraphenylethylene-Capped Diserine through a Hierarchical Assembly Process

We report a new peptide-based urchin-shaped structure prepared through two-step self-assembly of tetraphenylethylene-diserine (TPE-SS). Hydrogelation generated nanobelts through the first stage of self-assembly of TPE-SS; these nanobelts further transformed on silicon wafers into urchin-like microstructures featuring nanosized spines. The presence of the TPE moiety in the hydrogelator resulted in aggregation-induced emission characteristics both in the solution and in the gel phases. TPE-SS has the lowest molecular weight of any TPE-capped hydrogelator with β-sheet-like structures under physiological pH. This new design strategy appears to be useful for generating three-dimensional self-assembled microstructures and multifunctional biomaterials. We found that TPE-SS is biocompatible with human mesenchymal stem cells and breast cancer cells, making them potential applications in tissue engineering and biomedical research.

In situ coordination interactions between metal-organic framework nanoemitters and coreactants for enhanced electrochemiluminescence in biosensing

Coreactant electrochemiluminescence (ECL) is one of the most popular pathways in commercial analysis, which can provide simplicity and convenience for getting intense ECL emission. However, the low efficiency of intermolecular electron transfer could weaken ECL intensity. In this work, we developed an enhanced ECL strategy through in situ coordination interactions between metal-organic framework emitters and coreactants. First, a metal-organic framework (MOF) emitter was synthesized with 1,1,2,2-tetrakis(4-(pyridin-4-yl)phenyl)ethane (TPPE) as aggregation-induced emission linkers and Zn as nodes. Interestingly, compared to TPPE ligand, the resulted MOF nanoemitters demonstrated 49.5 folds enhancement of ECL emission in the presence of 1,4-diazabicyclo[2.2.2]octane (DABCO) as the coreactant. More significantly, different from the constant ECL intensity using TPrA coreactant, DABCO exhibited time-dependent ECL intensity due to the intrareticular electron transfer through coordination interaction between DABCO and Zn²⁺, which was confirmed by X-ray photoelectron spectroscopy and Fourier transform infrared spectral experiments. The enhanced ECL was then applied to construct a sensitive ECL method to detect dopamine in serum samples. The coordination interaction between emitters and coreactants not only provides a universal way to enhance ECL, but also expands the applications of coreactant ECL system in convenience route.

Photoredox-Catalyzed Cascade sp2 C-H Bond Functionalization to Construct Substituted Acridine with Diarylamine and Hypervalent Iodine(III) Reagents

A photocatalyzed cascade double C-C formation via sp² C-H bond activation of diarylamines with hypervalent iodine diazo reagents was developed. A variety of diarylamines and hypervalent iodine(III) reagents were tolerated well, and a range of substituted acridines with yields ranging from moderate to excellent was provided efficiently. The protocol introduces diazo groups onto diarylamines and enables subsequent late-stage assembly point functionalization with the diazonium structure, forming two new C-C bonds in a sequential fashion.

Electrochemiluminescence nanoemitters for immunoassay of protein biomarkers

The family of electrochemiluminescent luminophores has witnessed quick development since the electrochemiluminescence (ECL) phenomenon of silicon nanoparticles was first reported in 2002. Moreover, these developed ECL nanoemitters have extensively been applied in sensitive detection of protein biomarker by combining with immunological recognition. This review firstly summarized the origin and development of various ECL nanoemitters including inorganic and organic nanomaterials, with an emphasis on metal-organic frameworks (MOFs)-based ECL nanoemitters. Several effective strategies to amplify the ECL response of nanoemitters and improve the sensitivity of immunosensing were discussed. The application of ECL nanoemitters in immunoassay of protein biomarkers for diagnosis of cancers and other diseases, especially lung cancer and heart diseases, was comprehensively presented. The recent development of ECL imaging with the nanoemitters as ECL tags for detection of multiplex protein biomarkers on single cell membrane also attracted attention. Finally, the future opportunities and challenges in the ECL biosensing field were highlighted.

Curved π-Conjugated Helical Carbon Frameworks: Syntheses, Structural Analyses, and Properties

Two enantiomers with helical carbon frameworks (M-HCFa and P-HCFa) and their conformational isomers (M-HCFb and P-HCFb) have been synthesized and characterized. The single-crystal analysis revealed the novel structures in which three propeller blades spiro-fused on two central benzene rings. The optical properties were further investigated, and stable bipolar electrochemiluminescence emissions were discovered for the first time existing in helical carbon frameworks, which provide new insights into the future development of high-performance molecular luminescent devices.

Study on the Electrochemiluminescence of Pentaphenylpyrrole in the Aqueous Phase Based on Structure-Regulated Strategy

Heterocyclic nitrogen compounds play a vital role in luminescent materials, but most of them face the challenges of aggregation-caused quenching (ACQ) and poor water solubility. In this work, we present the nitrogen heterocyclic pentaphenylpyrrole (PentaPP) with an excellent aggregation-induced electrochemiluminescence (AIE-ECL) performance in the aqueous phase through the comparison of the elegant ECL luminophore 5,10,15,20-tetraphenylporphyrin (TPP). Further studies suggest that such unique AIE-ECL arises from its propeller-like noncoplanar structure and the large conjugation from the phenyl groups on the ring. In addition, the new ECL analysis could feature some advantages of AIE characteristic, water compatibility, and strong signal and finally achieve the ultrasensitive detection toward the explosive 2,4,6-trinitrophenol (TNP) with a lower detection limit (1.1 nM). This study does not only benefit to solve the two key problems mentioned before but also enriches the fundamentals and applications for ECL and pyrrole research.

Studies on Annihilation and Coreactant Electrochemiluminescence of Thermally Activated Delayed Fluorescent Molecules in Organic Medium

Very recently, there is a great research interest in electrochemiluminescence (ECL) featuring thermally activated delayed fluorescence (TADF) properties, i.e., TADF-ECL. It is appealing since the earlier reports in this topic well-confirmed that this strategy has a great potential in achieving all-exciton-harvesting ECL efficiency under electrochemical excitation, which is a breakthrough in the topic of organic ECL. However, organic phase electrochemistry and ECL studies surrounding TADF-ECL are still extremely rare. Especially, the ECL spectra of previous reported TADF emitters are still very different from their PL spectra. In this work, we systematically measure and discuss the liquid electrochemistry and ECL behavior of two typical TADF molecules in organic medium. Most importantly, we verify for the first time that the ECL spectra of them (coreactant ECL mode) are identical to their PL spectra counterparts, which confirms the effectiveness of TADF photophysical properties in the coreactant ECL mode in practice.

Electrochemiluminescence covalent organic framework coupling with CRISPR/Cas12a-mediated biosensor for pesticide residue detection

The trace detection of pesticide residue becomes particularly important since increasing attentions have been attached to food safety. Herein, we developed an electrochemiluminescence (ECL) covalent organic framework (COF) based-biosensor for trace pesticide detection coupling with CRISPR/Cas12a-mediated signal accumulation strategy. Firstly, the target conversion was carried out with an aptamer-assembled magnetic spherical nucleic acids, which can convert acetamiprid to activator DNA, triggering the CRISPR/Cas12a to make quenching probes far away from electrode for signal accumulation. The COF with stable and strong ECL was synthesized by a condensation reaction between the perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA) and melamine (MA), due to the highly ordered arrangement of the PTCDA luminescence units among COF structure and the pore confinement effect. Moreover, the designed assay method was successfully employed to detect the residual level of acetamiprid in real sample and expected to be widely used in pesticide-related food safety.

Rigid Enhanced Electrochemiluminescence of 1,2,3-Triaryl Indenes as an Ultrasensitive Sensor for D2O in H2O

The intriguing aggregation-induced emission has recently been applied in the electrochemiluminescence, called aggregation-induced electrochemiluminescence (AIE-ECL), which is conducive to solving the water insolubility and aggregation-caused quenching for most organic luminescence probes. However, AIE-ECL still has the problems of low luminous efficiency and limited practical application. In this work, we disclosed the AIE-ECL properties of 1,2,3-triaryl-substituted indenes containing rigid structures. Experimental and theoretical investigations demonstrated that such a rigid structure could significantly enhance the aromaticity and stability and thereby the luminescence performance of these indenes. Moreover, according to the finding of hydrogen/deuterium exchange for active hydrogen in indene under electrical excitation, ultrasensitive detection for D₂O in H₂O was realized by such an indene-based AIE-ECL system. Our research not only provided an attractive strategy to enhance the luminescence property for an AIE-active luminophore but also established a superior sensor toward D₂O.

Electrochemiluminescence Systems for the Detection of Biomarkers: Strategical and Technological Advances

Electrochemiluminescence (ECL)-based sensing systems rely on light emissions from luminophores, which are generated by high-energy electron transfer reactions between electrogenerated species on an electrode. ECL systems have been widely used in the detection and monitoring of diverse, disease-related biomarkers due to their high selectivity and fast response times, as well as their spatial and temporal control of luminance, high controllability, and a wide detection range. This review focuses on the recent strategic and technological advances in ECL-based biomarker detection systems. We introduce several sensing systems for medical applications that are classified according to the reactions that drive ECL signal emissions. We also provide recent examples of sensing strategies and technologies based on factors that enhance sensitivity and multiplexing abilities as well as simplify sensing procedures. This review also discusses the potential strategies and technologies for the development of ECL systems with an enhanced detection ability.

Construction of an aggregation-induced electrochemiluminescent sensor based on an aminal-linked covalent organic framework for sensitive detection of glutathione in human serum

We demonstrate the construction of an aggregation-induced electrochemiluminescent (AIECL) sensor for glutathione (GSH) assay by integrating an aminal-linked covalent organic framework (A-COF) with manganese dioxide (MnO₂) nanosheets. The AIECL of the A-COF is quenched by the MnO₂ nanosheets via electrochemiluminescent resonance energy transfer (ERET) from the excited A-COF to MnO₂. The presence of GSH can reduce the MnO₂ nanosheets into Mn²⁺, restoring the AIECL emission of the A-COF. This AIECL sensor has the characteristics of fast response, high sensitivity, and good selectivity toward GSH, and it can accurately measure GSH in human serum.

Highly Efficient Aggregation-Induced Electrochemiluminescence of Al(III)-Cbatpy Metal-Organic Gels Obtained by Ultrarapid Self-Assembly for a Biosensing Application

Aggregation-induced electrochemiluminescence (AIECL) has attracted extensive interest due to the significant increase in ECL response by restricting free intramolecular rotation and torsion, but traditional AIECL emitters suffer from limited ECL efficiency, high cost, and complex synthetic steps, dramatically limiting their applications. Herein, novel Al(III)-Cbatpy metal-organic gels (Al(III)-Cbatpy-MOGs) with nanofiber morphology and ultrarapid coordination of Al³⁺ and 4'-carboxylic acid-2,2':6',2″-terpyridine (Cbatpy) are developed, which demonstrates an excellent AIECL enhancement behavior far beyond that reported in ECL supramolecular gels. In view of the strong affinity of N and O atoms in Cbatpy toward Al³⁺, Al(III)-Cbatpy-MOGs with high viscosity and stability can be assembled in one step within about 15 s, easily conquering the main predicaments of current AIECL emitters: complicated synthesis steps and poor film formation. Impressively, the ECL efficiency of Al(III)-Cbatpy-MOGs with superemission is about 20 times higher than that of individual Cbatpy molecules, which is attributed to the aggregation of the organic ligand Cbatpy restricting intramolecular rotation and torsion to reduce nonradiative relaxation. Furthermore, compared with traditional metal complexes, Al(III)-Cbatpy-MOGs show the benefits of remarkable biocompatibility and low cost without the involvement of any organic solvents, noble metals, and rare metals. As proof, a "signal-off" sensing platform based on an Al(III)-Cbatpy-MOGs/S₂O₈^2- system was constructed for the sensitive detection of dopamine (DA) with a low detection limit of 0.34 nM. This strategy provides a novel method to prepare cheap metal-organic gels as a highly efficient AIECL emitter, which is promising as a luminescent molecular device and biosensor for clinical diagnostic applications.

Polythionine-mediated AgNWs-AuNPs aggregation conductive network: Fabrication of molecularly imprinted electrochemiluminescence sensors for selective capture of kanamycin

A molecularly imprinted electrochemiluminescence (ECL) sensor was developed for the specific detection of kanamycin in food using silver nanowires-gold nanoparticles (AgNWs-AuNPs) as a luminophore. Polythionine (pThi), another key component of the luminescent layer, can be used as an accelerator of the coreactant and can promote the formation of the AgNWs-AuNPs conductive network. In addition, molecularly imprinted polymers (MIPs) were polymerized on the AgNWs-AuNPs/pThi conductive network, which laid the foundation for the specific capture of kanamycin. The preparation and testing conditions of the sensor were optimized, and the performance was characterized. Under optimal conditions, the ECL intensity of AgNWs-AuNPs/pThi/MIP/GCE showed a good linear relationship (R² = 0.9956) with kanamycin concentration (1 × 10^-10-1 × 10^-6 M) and a low detection limit (3.14 × 10^-11 M, S/N = 3), showing satisfactory selectivity and stability. As proof, AgNWs-AuNPs/pThi/MIP/GCE was successfully used to detect kanamycin in actual samples with satisfactory recovery (83.27-94.13%), which was in good agreement with the results of HPLC-MS/MS (82.26-95.82%). The successful preparation of AgNWs-AuNPs/pThi/MIP/GCE in this experiment provided a new pathway for designing ECL components and constructing an ultrasensitive sensing platform in the field of hazardous substance detection.

Dual-potential electrochemiluminescent film constructed from single AIE luminogens for the sensitive detection of malachite green

Exploiting efficient electrochemiluminescent (ECL) luminogens is crucial for the development of high-performance ECL sensors. Herein, a kind of efficient luminogen (BTPEBT) consisting of benzothiadiazole (BTD) as an electron acceptor and tetraphenylethylene (TPE) as an electron donor was facilely synthesized through a one-step Suzuki reaction. BTPEBT showed typical aggregation-induced emission (AIE) effects with a high solid-state quantum yield of 69.8%. The fabricated solid-state ECL film that is based on single AIE luminogens presented unique dual-potential ECL properties for the first time. The bright ECL of this film could be observed by the naked eye with a satisfactory ECL efficiency of 22.8%. The dense ECL film showed a low electron-transfer resistance, which favors electron transfer among AIE luminogens, electrolytes and the electrode, giving rise to bright ECL emission. The bright ECL film was developed as an ECL sensor for the sensitive and selective detection of malachite green (MG) in a broad linear range from 10^-10 to 10^-5 M. The limit of detection (LOD) was as low as 7.6 × 10^-11 M. Moreover, the ECL sensing platform was further employed to detect MG in a real fish tissue sample with high sensitivity and good specificity. More importantly, the recycled BTPEBT film had good reproducibility for MG detection. The novel dual-potential ECL film constructed from single AIE luminogens provides a promising platform for the sensitive detection of MG in the food industry.

Pyrenecarboxaldehyde encapsulated porous TiO2 nanoreactors for monitoring cellular GSH levels

Recently, ternary electrochemiluminescence (ECL) system has become a hot research topic due to its great potential for improving ECL efficiency by promoting the generation of intermediates. However, it is still a great challenge to increase the utilization rate of intermediates in a ternary ECL system. Herein, we propose a strategy to increase the utilization rate of intermediates by designing pyrenecarboxaldehyde (Pyc) encapsulated porous titania (pTiO₂) nanospheres (Pyc@pTiO₂) as ECL nanoreactors for an integrated ternary (luminophore/coreactant/co-reaction accelerator, Pyc/S₂O₈^2-/TiO₂) ECL system construction. Specifically, pTiO₂ acted as an ECL co-reaction accelerator, in which Pyc could obtain electrons from the conduction band of TiO₂ to produce more SO₄˙^-, increasing its emissions. Simultaneously, pTiO₂ could provide confined reaction spaces to effectively shorten the diffusion distance, extend the lifetime of free radicals, increase the utilization rate of intermediates and improve the efficiency of the ternary ECL system. As a proof of concept, the Pyc@pTiO₂ nanoreactors-based sensing platform was successfully constructed to sensitively monitor cellular GSH levels. Overall, this work for the first time proposed an avenue to increase the utilization rate of intermediates in a ternary ECL system, which opened a new route for ECL biosensing in cell analysis applications.

Aromaticity-Enhanced pH-Responsive Electrochemiluminescence of Cyclopentadienols

Due to significantly tackling the problems of aggregation-caused quenching and water insolubility, aggregation-induced emission electrochemiluminescence (AIE-ECL) has emerged as a research highlight in aqueous detection and sensing. Herein, we reported a series of cyclopentadienols featuring excellent AIE-ECL properties on the basis of an enhanced aromaticity strategy. In detail, substituents profoundly determined ECL emission by affecting the characteristic absorption peak intensity ratio in UV-vis spectra and lowest unoccupied molecular orbital (LUMO)-highest occupied molecular orbital (HOMO) energies. It was found that 1,2,3,4,5-pentafluorophenyl cyclopentadienol (PFCD) containing an electron-withdrawing fluorine substituent, the maximum R/B band ratio, and a smaller LUMO-HOMO band gap demonstrated the best ECL performance. Meanwhile, such an AIE-ECL system displayed a wide response range toward pH (4-12) with a good linear relationship. Our research not only enriched polycyclic aromatic hydrocarbon-based AIE-ECL systems but also established an efficient pH sensor in the aqueous phase.

Highly Efficient Aggregation-Induced Enhanced Electrochemiluminescence of Cyanophenyl-Functionalized Tetraphenylethene and Its Application in Biothiols Analysis

Exploring new electrochemiluminescence (ECL) luminophores with high ECL efficiency and good stability in aqueous solution is in great demand for biological sensing. In this work, highly efficient aggregation-induced enhanced ECL of cyanophenyl-functionalized tetraphenylethene (tetra[4-(4-cyanophenyl)phenyl]ethene, TCPPE) and its application in biothiols analysis were reported. TCPPE contains four 4-cyanophenyl groups covalently attached to the tetraphenylethene (TPE) core, generating a nonplanar three-dimensional twisted conformation structure. TCPPE nanoparticles (NPs) with an average size of 15.84 nm were prepared by a precipitation method. High ECL efficiency (593%, CdS as standard) and stable ECL emission (over one month) were obtained for TCPPE NPs in aqueous solution. The unique properties of TCPPE NPs could be ascribed to the efficient suppression of nonradiative transition, the decrease of the energy gap, and the increase of anionic radical stability, which were proved by theoretical calculation and electrochemical and fluorescence methods. Contrasting aggregation-induced ECL chromic emission was first observed for TCPPE NPs. As a proof-of-methodology, an ECL method was developed for three biothiol assays with detection limits of 6, 7, and 300 nM for cysteine, homocysteine, and glutathione, respectively. This work demonstrates that TCPPE NPs are promising ECL luminophores, and the incorporation of appropriate substituents into luminophores can improve ECL efficiency and radical stability.

Near-Infrared Electrogenerated Chemiluminescence from Simple Copper Nanoclusters for Sensitive Alpha-Fetoprotein Sensing

Exploiting low cost, water-soluble, and near-infrared (NIR) emissive electrochemiluminophores (ECLphores) is significantly important for biological applications. In this study, bright and NIR electrogenerated chemiluminescence (ECL) emissive copper nanoclusters (Cu NCs) were synthesized through a facile one-pot wet chemical reduction method. ECL properties of obtained Cu NCs were examined in the presence of potassium persulfate, resulting in maximum intensity at 735 nm, at least 135 nm red-shifted with respect to all other Cu NCs. Electrochemistry, photoluminescence (PL), and spooling ECL spectroscopies were used to track NIR ECL emission of Cu NCs ascribed to the monomeric excited states. Due to the abundant binding sites of bovine serum albumin (BSA) to anchor target biomolecules, a sandwich-type ECL immunosensor was thus fabricated using such BSA-templated Cu NCs as tags and alpha fetoprotein antigen (AFP) as a model protein for the first time. Without assisting any signal amplification strategies, the proposed NIR ECL biosensor exhibited a wide linear range (1-400 ng mL^-1) and low detection limit (0.02 ng mL^-1) as well as superior selectivity and reproducibility and was successfully applied in real human serum sample determination. This work sets the stage for the development of novel non-noble metal nanoclusters for large-scale and emerging nanotechnology applications.

Cysteine Modification of Glutathione-Stabilized Au Nanoclusters to Red-Shift and Enhance the Electrochemiluminescence for Sensitive Bioanalysis

Screening new electrochemiluminescence (ECL) emitters for the design of sensitive detection strategies with even long emission wavelength is intensively anticipated in ECL evolution. Herein, a promising modification strategy for improving the ECL performance of Au nanoclusters (AuNCs) as a water-soluble luminophore was proposed. Upon the introduction of l-cysteine (l-Cys) onto the surface of glutathione (GSH)-stabilized AuNCs (GSH-AuNCs), the dual-thiol bond between l-Cys and GSH was formed to limit the intramolecular motion and nonradiative relaxation of the excited state from the capping agents, which resulted in the enhancement of monochromatic ECL emission of GSH-AuNCs with a red-shifted wavelength. By utilizing triethylamine as a coreactant, the ECL of l-Cys/GSH-AuNCs was about 1.5-fold stronger than that of GSH-AuNCs, and the emission wavelength red-shifted from 660 to 780 nm at a relatively low potential, which could decrease the interference in bioassay and the photochemical damage in nondestructive detection. As a proof of application, a sandwich-type immunosensing method for CYFRA 21-1 was proposed with l-Cys/GSH-AuNCs as the signal tag, which displayed a wide linear ranging from 0.2 fg/mL to 2 ng/mL and a limit of detection down to 0.067 fg/mL at 3S/N. This work provides a wonderful strategy for promoting the performance of ECL emitters.

A scaffold of thermally activated delayed fluorescent polymer dots towards aqueous electrochemiluminescence and biosensing applications

Thermally activated delayed fluorescent (TADF) polymer dots were prepared, which enables aqueous electrochemiluminescence of TADF polymer emitters and its biosensor application for the first time.