Carbene metal amide photoemitters: tailoring conformationally flexible amides for full color range emissions including white-emitting OLED

Simultaneous Thermally Stimulated Delayed Phosphorescence (TSDP) and Thermally Activated Delayed Fluorescence (TADF) in a Two-Coordinated Au(I) Bimetallic Complex Featuring a Tandem Carbene Structure

A bimetallic, two-coordinated carbene-metal-amine (cMa) Au(I) complex featuring a twisted tandem carbene structure (NHC1-Au-NHC2-Au-carbazolyl) was synthesized. The molecular structure in single crystals revealed a large dihedral angle between the two carbene ligands, while the bridged carbene NHC2 and carbazolyl (Cz) ligands were coplanar. A bluish green thermally stimulated delayed phosphorescence (TSDP) was observed in crystals with an emission lifetime over 70 μs, which can be attributed to the spin allowed diabatic population of a high-lying emissive triplet state from the 3LE characterized low-lying ones. The small rotation energy barrier of Cz along the coordination bond allowed conformers with large dihedral angles between NHC2 and Cz. The ICT characterized S1 state was consequently stabilized to achieve a thermally accessible energy gap to facilitate ISC between triplets and the S1, leading to the thermally activated delayed fluorescence (TADF). Simultaneous TSDP and TADF dual emission can be recorded in its doped polymer film owing to the coexistence of these different conformers.

Synthesis of N-heterocyclic carbene (NHC)-Au/Ag/Cu benzotriazolyl complexes and their catalytic activity in propargylamide cycloisomerization and carbonyl hydrosilylation reactions

Carbene-metal-amide (CMA) complexes of gold, silver, and copper have been studied extensively for their photochemical/photocatalytic properties and as potential (pre-)catalysts in organic synthesis. Herein, the design, synthesis, and characterization of five bench-stable Au-, Ag-, and Cu-NHC complexes bearing the benzotriazolyl anion as an amide donor, are reported. All complexes are synthesized in a facile and straightforward manner, using mild conditions. The catalytic activity of the Ag and Cu complexes was studied in propargylamide cycloisomerization and carbonyl hydrosilylation reactions. Both CMA-catalyzed transformations proceed under mild conditions and are highly efficient for a range of propargylamides and carbonyl compounds, respectively, affording the desired corresponding products in good to excellent yields.

Activation of TADF in Photon Upconverting Crystals of Dinuclear Cu(I)-Iodide Complexes by Ligand Engineering

This work reports that ligand engineering can modulate the triplet harvesting mechanism in iodide-bridged rhombic Cu2I2 complexes. Complex-1, with a smaller Cu-Cu distance, exhibits phosphorescence from 3(M+X)LCT and 3CC states with 66% quantum yield, whereas an increased Cu-Cu distance in complex-2 results in a switch of the emission from phosphorescence to TADF, which occurs via 1/3(M+X)LCT states with 83% quantum yield. The TADF property of complex-2 has been utilized for the fabrication of a pc-LED emitting efficient warm white light. Moreover, the high charge-transfer nature of these complexes leads to the emergence of third-harmonic generation (THG). Interestingly, complex-1 exhibits efficient third-harmonic generation with a χ(3) value of 1.15 × 10-18 m2 V-2 and LIDT value of 14.73 GW/cm2. This work aims to provide a structure-property relationship to achieve effective harvestation of triplet excitons in iodide-bridged rhombic Cu2I2 complexes and their effective utilization in OLED device fabrication and nonlinear photon upconversion processes.

Two-Coordinate Thermally Activated Delayed Fluorescence Coinage Metal Complexes: Molecular Design, Photophysical Characters, and Device Application

Since the emergence of the first green light emission from a fluorescent thin-film organic light emitting diode (OLED) in the mid-1980s, a global consumer market for OLED displays has flourished over the past few decades. This growth can primarily be attributed to the development of noble metal phosphorescent emitters that facilitated remarkable gains in electrical conversion efficiency, a broadened color gamut, and vibrant image quality for OLED displays. Despite these achievements, the limited abundance of noble metals in the Earth's crust has spurred ongoing efforts to discover cost-effective electroluminescent materials. One particularly promising avenue is the exploration of thermally activated delayed fluorescence (TADF), a mechanism with the potential to fully harness excitons in OLEDs. Recently, investigations have unveiled TADF in a series of two-coordinate coinage metal (Cu, Ag, and Au) complexes. These organometallic TADF materials exhibit distinctive behavior in comparison to their organic counterparts. They offer benefits such as tunable emissive colors, short TADF emission lifetimes, high luminescent quantum yields, and reasonable stability. Impressively, both vacuum-deposited and solution-processed OLEDs incorporating these materials have achieved outstanding performance. This review encompasses various facets on two-coordinate TADF coinage metal complexes, including molecular design, photophysical characterizations, elucidation of structure-property relationships, and OLED applications.

Structural Engineering of Iridium(III) Phosphors with Imidazo[4,5-b]pyrazin-2-ylidene Cyclometalates for Efficient Blue Electroluminescence

Iridium(III) complexes are particularly noted for their excellent potentials in fabrication of blue organic light-emitting diodes (OLEDs), but the severe efficiency roll-off largely hampered their practical applications. To reveal the underlying characteristics, three Ir(III) complexes, namely f-ct5c, f-ct5d, and f-ct11, bearing imidazo[4,5-b]pyrazin-2-ylidene cyclometalates are prepared and characterized in detail. Both f-ct5c and f-ct5d (also their mixture f-ct5mix) gave intensive blue emissions peaking at ≈465 nm with short radiative lifetimes of 1.76 and 2.45 µs respectively, in degassed toluene. Alternatively, f-ct11 with two 4-tert-butylphenyl substituents on each imidazo[4,5-b]pyrazin-2-ylidene entity, possessed a bluish-green emission (508 nm) together with an extended radiative lifetime of 34.3 µs in the dispersed PMMA matrix. Consequently, the resulting solution-processed OLED with f-ct11 delivered a maximum external quantum efficiency (EQEmax ) of 6.5% with serious efficiency roll-offs. In contrast, f-ct5mix based device achieved a high EQEmax of 27.2% and the EQE maintained at 23.0% of 1000 cd m-2 . Furthermore, the hyper-OLEDs with f-ct5mix as the sensitizer and v-DABNA as the terminal emitter afford narrowed emission with a considerably high EQEmax exceeding 32%, affirming the potential of f-ct5mix to serve as both the emitter and sensitizer in OLEDs.

Achieving Long-Wavelength Electroluminescence Using Two-Coordinate Gold(I) Complexes: Overcoming the Energy Gap Law

Two-coordinate coinage metal complexes have emerged as promising emitters for highly efficient organic light-emitting devices (OLEDs). However, achieving efficient long-wavelength electroluminescence emission from these complexes remains as a daunting challenge. To address this challenge, molecular design strategies aimed at bolstering the photoluminescence quantum yield (Φ) of Au(I) complex emitters in low-energy emission regions are investigated. By varying amido ligands, a series of two-coordinate Au(I) complexes is developed that exhibit photoluminescence peak wavelengths over a broad range of 533-750 nm. These complexes, in particular, maintain Φ values up to 10% even in the near-infrared emission region, overcoming the constraints imposed by an energy gap. Quantum chemical calculations and photophysical analyses reveal the action of radiative control, which serves to overcome the energy gap law, becomes more pronounced as the overlap between hole and electron distributions (Sr (r)) in the excited state increases. It is further elucidated that Sr (r) increases with the distance between the hole-distribution centroid and the nitrogen atom in an amido ligand. Finally, multilayer OLEDs involving the Au(I) complex emitters exhibit performances beyond the borderline of the electroluminescence wavelength-external quantum efficiency space set by previous devices of coinage metal complexes.

Deep-red photoluminescent mechanoresponsive polymers with dynamic CuI-arylamide mechanophores

We demonstrate the use of copper arylamide complexes as efficient photoluminescent mechanophores to design deep-red/near-IR emissive polymers showing reversible changes in photoluminescence intensity in the red/near-IR region in response to mechanical stretching. The mechanoresponse was repeatable over 30 cycles, showing a measurable increase of photoluminescence intensity even at a small applied stress of ca. 0.01 MPa. We demonstrate the potential of using conformationally dynamic copper amide complexes as sensitive and reversible mechanophores for near-IR imaging; systematic control over the emission range was achieved using amide modification.

A Rising Star: Luminescent Carbene-Metal-Amide Complexes

Coinage metal (gold, silver, and copper) complexes are attractive candidates to substitute the widely studied noble metal complexes, such as, iridium(III) and platinum(II), as luminescent materials in organic light-emitting diodes (OLEDs). However, the development of coinage metal complexes exhibiting high emission quantum yields and short exciton lifetimes is still a formidable challenge. In the past few years, coinage metal complexes featuring a carbene-metal-amide (CMA) motif have emerged as a new class of luminescent materials in OLEDs. Thanks to the coinage metal-bridged linear geometry, coplanar conformation, and the formation of excited states with dominant ligand-to-ligand charge transfer character and reduced metal d-orbital participation, most CMA complexes have high radiative rates via thermally activated delayed fluorescence. Currently, the family of CMA complexes have rapidly evolved and remarkable progresses in CMA-based OLEDs have been made. Here, a Concept article on CMA complexes is presented, with a focus on molecular design principles, the correlation between molecular structure/conformation and optoelectronic properties, as well as OLED performance. The future prospects of CMA complexes are also discussed.

Gold(I)-N-Heterocyclic Carbene Synthons in Organometallic Synthesis

The prominent role of gold-N-heterocyclic carbene (NHC) complexes in numerous research areas such as homogeneous (photo)catalysis, medicinal chemistry and materials science has prompted organometallic chemists to design gold-based synthons that permit access to target complexes through simple synthetic steps under mild conditions. In this review, the main gold-NHC synthons employed in organometallic synthesis are discussed. Mechanistic aspects involved in their synthesis and reactivity as well as applications of gold-NHC synthons as efficient pre-catalysts, antitumor agents and/or photo-emissive materials are presented.

Highly phosphorescent carbene-metal-carboranyl complexes of copper(I) and gold(I)

New phosphorescent "carbene-metal-carboranyl" (CMC) Cu(I) and Au(I) complexes based on the diamidocarbene (DAC) ligand show up to 68% photoluminescence quantum yield and microsecond range lifetimes. CMC organic light emitting diodes (OLEDs) emit sky-blue and warm white electroluminescence.

Luminescent Bimetallic Two-Coordinate Gold(I) Complexes Utilizing Janus Carbenes

A series of bimetallic carbene-metal-amide (cMa) complexes have been prepared with bridging biscarbene ligands to serve as a model for the design of luminescent materials with large oscillator strengths and small energy differences between the singlet and triplet states (ΔEST). The complexes have a general structure (R2N)Au(:carbene─carbene:)Au(NR2). The bimetallic complexes show solvation-dependent absorption and emission that is analyzed in detail. It is found that the molar absorptivity of the bimetallic complexes is correlated with the energy barrier to rotation of the metal-ligand bond. The bimetallic cMa complexes also exhibit short emission lifetimes (τ = 200-300 ns) with high photoluminescence efficiencies (ΦPL > 95%). The radiative rates of bimetallic cMa complexes are 3-4 times faster than that of the corresponding monometallic complexes. Analysis of temperature-dependent luminescence data indicates that the lifetime for the singlet state (τS1) of bimetallic cMa complexes is near 12 ns with a ΔEST of 40-50 meV. The presented compounds provide a general design for cMa complexes to achieve small values for ΔEST while retaining high radiative rates. Solution-processed organic light-emitting devices (OLEDs) made using two of the complexes as luminescent dopants show high efficiency and low roll-off at high luminance.

Towards Fast Circularly Polarized Luminescence in 2-Coordinate Chiral Mechanochromic Copper(I) Carbene Complexes

A series of chiral mechanochromic copper(I) cAAC (cAAC=cyclic (alkyl)(amino)carbene) complexes with a variety of amide ligands have been studied with regard to their photophysical and chiroptical properties to elucidate structure-property relationships for the design of efficient triplet exciton emitters exhibiting circularly polarized luminescence. Depending on the environment, which determines the excited state energies, either thermally activated delayed fluorescence (TADF) from 1/3 LLCT states or phosphorescence from 3 LLCT/LC states occurs. However, neither chiral moieties at the carbene nor at the carbazolate ligands provide detectable luminescence dissymmetries glum . An exception is [Cu(phenoxazinyl)(cAAC)], showing orange to deep red TADF with λmax =601-715 nm in solution, powders and in PMMA. In this case, the amide ligand can undergo distortions in the excited state. This design motif leads to the first linear, non-aggregated CPL-active copper(I) complex with glum of -3.4 ⋅ 10-3 combined with a high radiative rate constant of 6.7 ⋅ 105  s-1 .

Two-Coordinate Coinage Metal Complexes as Solar Photosensitizers

Generating sustainable fuel from sunlight plays an important role in meeting the energy demands of the modern age. Herein, we report two-coordinate carbene-metal-amide (cMa, M = Cu(I) and Au(I)) complexes that can be used as sensitizers to promote the light-driven reduction of water to hydrogen. The cMa complexes studied here absorb visible photons (ε_vis > 10³ M^-1 cm^-1), maintain long excited-state lifetimes (τ ∼ 0.2-1 μs), and perform stable photoinduced charge transfer to a target substrate with high photoreducing potential (E^+/* up to -2.33 V vs Fc^+/0 based on a Rehm-Weller analysis). We pair these coinage metal complexes with a cobalt-glyoxime electrocatalyst to photocatalytically generate hydrogen and compare the performance of the copper- and gold-based cMa complexes. We also find that the two-coordinate complexes herein can perform photodriven hydrogen production from water without the addition of the cobalt-glyoxime electrocatalyst. In this "catalyst-free" system, the cMa sensitizer partially decomposes to give metal nanoparticles that catalyze water reduction. This work identifies two-coordinate coinage metal complexes as promising abundant metal, solar fuel photosensitizers that offer exceptional tunability and photoredox properties.

Tailoring Carbene-Metal-Amides for Thermally Activated Delayed Fluorescence: A Computationally Guided Study on the Effect of Cyclic (Alkyl)(amino)carbenes

Gold-centered carbene-metal-amides (CMAs) containing cyclic (alkyl)(amino)carbenes (CAACs) are promising emitters for thermally activated delayed fluorescence (TADF). Aiming at the design and optimization of new TADF emitters, we report a density functional theory study of over 60 CMAs with various CAAC ligands, systematically evaluating computed parameters in relation to photoluminescence properties. The CMA structures were primarily selected based on experimental synthesis prospects. We demonstrate that TADF efficiency of the CMA materials originates from a compromise between oscillator strength coefficients and exchange energy (ΔE_ST). The latter is governed by the overlap of HOMO and LUMO orbitals, where HOMO is localized on the amide and LUMO over the Au-carbene bond. The S₀ ground and excited T₁ states of the CMAs adopt approximately coplanar geometry of carbene and amide ligands, but rotate perpendicular in the excited S₁ states, resulting in degeneracy or near-degeneracy of S₁ and T₁, accompanied by a decrease in the S₁-S₀ oscillator strength from its maximum at coplanar geometries to near zero at rotated geometries. Based on the computations, promising new TADF emitters are proposed and synthesized. Bright CMA complex (^Et2CAAC)Au(carbazolide) is obtained and fully characterized in order to demonstrate that excellent stability and high radiative rates up to 10⁶ s^-1 can be obtained for the gold-CMA complexes with small CAAC-carbene ligands.

Donor, Acceptor, and Molecular Charge Transfer Emission All in One Molecule

The molecular photophysics in the thermally activated delayed fluorescence (TADF) spiro-acridine-anthracenone compound, ACRSA, is dominated by the rigid orthogonal spirocarbon bridging bond between the donor and acceptor. This critically decouples the donor and acceptor units, yielding photophysics, which includes (dual) phosphorescence and the molecular charge transfer (CT) states giving rise to TADF, that are dependent upon the excitation wavelength. The molecular singlet CT state can be directly excited, and we propose that supposed "spiro-conjugation" between acridine and anthracenone is more accurately an example of intramolecular through-space charge transfer. In addition, we show that the lowest local and CT triplet states are highly dependent upon spontaneous polarization of the environment, leading to energy reorganization of the triplet states, with the CT triplet becoming lowest in energy, profoundly affecting phosphorescence and TADF, as evident by a (thermally controlled) competition between reverse intersystem crossing and reverse internal conversion, i.e., dual delayed fluorescence (DF) mechanisms.

Mechano-Stimulus and Environment-Dependent Circularly Polarized TADF in Chiral Copper(I) Complexes and Their Application in OLEDs

Molecular emitters that combine circularly polarized luminescence (CPL) and high radiative rate constants of the triplet exciton decay are highly attractive for electroluminescent devices (OLEDs) or next-generation photonic applications, such as spintronics, quantum computing, cryptography, or sensors. However, the design of such emitters is a major challenge because the criteria for enhancing these two properties are mutually exclusive. In this contribution, we show that enantiomerically pure {Cu(Cbz^R)[(S/R)-BINAP]} [R = H (1), 3,6-tBu (2)] are efficient thermally activated delayed fluorescence (TADF) emitters with high radiative rate constants of k_TADF up to 3.1 × 10⁵ s^-1 from ^1/3LLCT states according to our temperature-dependent time-resolved luminescence studies. The efficiency of the TADF process and emission wavelengths are highly sensitive to environmental hydrogen bonding of the ligands, which can be disrupted by grinding of the crystalline materials. The origin of this pronounced mechano-stimulus photophysical behavior is a thermal equilibrium between the ^1/3LLCT states and a ³LC state of the BINAP ligand, which depends on the relative energetic order of the excited states and is prone to inter-ligand C-H···π interactions. The copper(I) complexes are also efficient CPL emitters displaying exceptional dissymmetry values g_lum of up to ±0.6 × 10^-2 in THF solution and ±2.1 × 10^-2 in the solid state. Importantly for application in electroluminescence devices, the C-H···π interactions can also be disrupted by employing sterically bulky matrices. Accordingly, we have investigated various matrix materials for successful implementation of the chiral copper(I) TADF emitters in proof-of-concept CP-OLEDs.

Light emission mechanism in dimers of carbene-metal-amide complexes

Recently an efficient dual electroluminescence from monomers and dimers was observed among the structural examples of the emerging emitter class of carbene-metal-amides (CMAs), allowing the preparation of simple design white organic light emitting diodes (wOLEDs). Here we investigate in detail the light emission mechanism in the dimeric species of CMA emitters on the basis of a copper(I) complex TCP bearing thiazoline carbene and 10H-phenothiazine 5,5-dioxide (Ptz) ligands. The X-ray structure for crystals with dimer-only emission was obtained, revealing that emissive aggregates consist of face-to-face stacked molecular pairs with an intermolecular distance of 3.673 Å. The close packing is aided by reduced sterical bulk at the carbene ligand, as well as by a torsional twist between the carbene and amide fragments. Experimental and computational data show that the emission mechanism in aggregates is related to the formation of a persistent dimer, not the excimer. Radiative relaxation proceeds through an intermolecular charge transfer process between the carbene and amide ligands of the neighbouring molecules. In comparison to the monomer, the thermally activated delayed fluorescence (TADF) process in the dimer is characterized with significantly higher energy gaps (ΔE_ST) between the lowest singlet (S₁) and triplet (T₁) excited states. At the same time the aggregated species exhibit a significantly increased phosphorescence rate (τ = 12 μs at 10 K temperature) due to the presence of two metal atoms, resulting in a sixfold increase in the spin-orbit coupling (SOC) matrix element in comparison to the monomer.

Luminescent Complexes of Platinum, Iridium, and Coinage Metals Containing N-Heterocyclic Carbene Ligands: Design, Structural Diversity, and Photophysical Properties

The employment of N-heterocyclic carbenes (NHCs) to design luminescent metal compounds has been the focus of recent intense investigations because of the strong σ-donor properties, which bring stability to the whole system and tend to push the d-d dark states so high in energy that they are rendered thermally inaccessible, thereby generating highly emissive complexes for useful applications such as organic light-emitting diodes (OLEDs), or featuring chiroptical properties, a field that is still in its infancy. Among the NHC complexes, those containing organic chromophores such as naphthalimide, pyrene, and carbazole exhibit rich emission behavior and thus have attracted extensive interest in the past five years, especially carbene coinage metal complexes with carbazolate ligands. In this review, the design strategies of NHC-based luminescent platinum and iridium complexes with large spin-orbit-coupling (SOC) are described first. Subsequent paragraphs illustrate the recent advances of luminescent coinage metal complexes with nucleophilic- and electrophilic-based carbenes based on silver, gold, and copper metal complexes that have the ability to display rich excited state emissions in particular via thermally activated delayed fluorescence (TADF). The luminescence mechanism and excited state dynamics are also described. We then summarize the advance of NHC-metal complexes in the aforementioned fields in recent years. Finally, we propose the development trend of this fast-growing field of luminescent NHC-metal complexes.

Photoactive Copper Complexes: Properties and Applications

Photocatalyzed and photosensitized chemical processes have seen growing interest recently and have become among the most active areas of chemical research, notably due to their applications in fields such as medicine, chemical synthesis, material science or environmental chemistry. Among all homogeneous catalytic systems reported to date, photoactive copper(I) complexes have been shown to be especially attractive, not only as alternative to noble metal complexes, and have been extensively studied and utilized recently. They are at the core of this review article which is divided into two main sections. The first one focuses on an exhaustive and comprehensive overview of the structural, photophysical and electrochemical properties of mononuclear copper(I) complexes, typical examples highlighting the most critical structural parameters and their impact on the properties being presented to enlighten future design of photoactive copper(I) complexes. The second section is devoted to their main areas of application (photoredox catalysis of organic reactions and polymerization, hydrogen production, photoreduction of carbon dioxide and dye-sensitized solar cells), illustrating their progression from early systems to the current state-of-the-art and showcasing how some limitations of photoactive copper(I) complexes can be overcome with their high versatility.

Thermo-, Mechano-, and Vapochromic Dinuclear Cuprous-Emissive Complexes with a Switchable CH3CN-Cu Bond

A thermo-, mechano-, and vapochromic bimetallic cuprous-emissive complex has been reported, and the origin and application of its tri-stimuli-responsive luminescence have been explored. As revealed by single-crystal structure analysis, thermo- and vapochromic luminescence adjusted by heating at 60 °C and CH₃CN vapor fuming, accompanied by a crystalline-to-crystalline transition, is due to the breaking and rebuilding of the CH₃CN-Cu bond, as supported by ¹H nuclear magnetic resonance (NMR), Fourier-transform infrared (FT-IR) spectroscopy, powder X-ray diffraction (PXRD), thermogravimetry (TG), and time-dependent density functional theory (TD-DFT) analyses of the CH₃CN-coordinated species [Cu₂(μ-dppa)₂(μ-η¹(N)η²(N,N)-fptz)(CH₃CN)](ClO₄)·H₂O (1) and its CH₃CN-removed derivative [Cu₂(μ-dppa)₂(μ-η¹(N)η²(N,N)-fptz)](ClO₄)·H₂O (2). Luminescence mechanochromism, mixed with a crystalline-to-amorphous transition where the initial crystalline is different for 1 and 2, is mainly assigned as the destruction of the CH₃CN-Cu bonding and/or the O···HN_dppa and OH···N_triazolyl hydrogen bonds. It is also suggested that a rational use of switchable coordination such as weak metal-solvent bonding is a feasible approach to develop multi-stimuli-responsive luminescent materials and devices.

π-Extended Ligands in Two-Coordinate Coinage Metal Complexes

Two-coordinate carbene-M^I-amide (cMa, M^I = Cu, Ag, Au) complexes have emerged as highly efficient luminescent materials for use in a variety of photonic applications due to their extremely fast radiative rates through thermally activated delayed fluorescence (TADF) from an interligand charge transfer (ICT) process. A series of cMa derivatives was prepared to examine the variables that affect the radiative rate, with the goal of understanding the parameters that control the radiative TADF process in these materials. We find that blue-emissive complexes with high photoluminescence efficiencies (Φ_PL > 0.95) and fast radiative rates (k_r = 4 × 10⁶ s^-1) can be achieved by selectively extending the π-system of the carbene and amide ligands. Of note is the role played by the increased separation between the hole and electron in the ICT excited state. Analysis of temperature-dependent luminescence data and theoretical calculations indicate that the hole-electron separation exerts a primary effect on the energy gap between the lowest-energy singlet and triplet states (ΔE_ST) while keeping the radiative rate for the singlet state relatively unchanged. This interpretation provides guidelines for the design of new cMa derivatives with even faster radiative rates in addition to those with slower radiative rates and thus extended excited state lifetimes.

Excited-State Lifetime Modulation by Twisted and Tilted Molecular Design in Carbene-Metal-Amide Photoemitters

Carbene-metal-amides (CMAs) are an emerging class of photoemitters based on a linear donor-linker-acceptor arrangement. They exhibit high flexibility about the carbene-metal and metal-amide bonds, leading to a conformational freedom which has a strong influence on their photophysical properties. Herein we report CMA complexes with (1) nearly coplanar, (2) twisted, (3) tilted, and (4) tilt-twisted orientations between donor and acceptor ligands and illustrate the influence of preferred ground-state conformations on both the luminescence quantum yields and excited-state lifetimes. The performance is found to be optimum for structures with partially twisted and/or tilted conformations, resulting in radiative rates exceeding 1 × 10⁶ s^-1. Although the metal atoms make only small contributions to HOMOs and LUMOs, they provide sufficient spin-orbit coupling between the low-lying excited states to reduce the excited-state lifetimes down to 500 ns. At the same time, high photoluminescence quantum yields are maintained for a strongly tilted emitter in a host matrix. Proof-of-concept organic light-emitting diodes (OLEDs) based on these new emitter designs were fabricated, with a maximum external quantum efficiency (EQE) of 19.1% with low device roll-off efficiency. Transient electroluminescence studies indicate that molecular design concepts for new CMA emitters can be successfully translated into the OLED device.

Inverse molecular design from first principles: tailoring organic chromophore spectra for optoelectronic applications

The discovery of molecules with tailored optoelectronic properties such as specific frequency and intensity of absorption or emission is a major challenge in creating next-generation organic light-emitting diodes (OLEDs) and photovoltaics. This raises the question: how can we predict a potential chemical structure from these properties? Approaches that attempt to tackle this inverse design problem include virtual screening, active machine learning and genetic algorithms. However, these approaches rely on a molecular database or many electronic structure calculations, and significant computational savings could be achieved if there was prior knowledge of (i) whether the optoelectronic properties of a parent molecule could easily be improved and (ii) what morphing operations on a parent molecule could improve these properties. In this perspective we address both of these challenges from first principles. We firstly adapt the Thomas-Reiche-Kuhn sum rule to organic chromophores and show how this indicates how easily the absorption and emission of a molecule can be improved. We then show how by combining electronic structure theory and intensity borrowing perturbation theory we can predict whether or not the proposed morphing operations will achieve the desired spectral alteration, and thereby derive widely-applicable design rules. We go on to provide proof-of-concept illustrations of this approach to optimizing the visible absorption of acenes and the emission of radical OLEDs. We believe this approach can be integrated into genetic algorithms by biasing morphing operations in favour of those which are likely to be successful, leading to faster molecular discovery and greener chemistry.

Thiazoline Carbene-Cu(I)-Amide complexes: Efficient White Electroluminescence from Combined Monomer and Excimer Emission

Luminescent carbene-metal-amide complexes bearing group 11 metals (Cu, Ag, Au) have recently attracted great attention due to their exceptional emission efficiency and high radiative decay rates (k_r). These materials provide a less costly alternative to organic light-emitting diode (OLED) emitters based on more scarce metals, such as Ir and Pt. Herein, a series of eight Cu(I) complexes bearing as yet unexplored 1,3-thiazoline carbenes have been investigated and analyzed with respect to their light emission properties and OLED application. For the first time among the class of copper-based organometallic compounds the formation of efficient electroluminescent excimers is demonstrated. The prevalence of electroluminescence (EL) from either the monomer (bluish green) or the excimer (orange-red) can be adjusted in vacuum-deposited emissive layers by altering the extent of steric encumbrance of the emitter or its concentration. Optimized conditions in terms of the emitter structure and mass fraction allowed a simultaneous EL from the monomer and excimer, which laid the basis for a preparation of a single-emitter white OLED (WOLED) with external quantum efficiency of 16.5% and a maximum luminance of over 40000 cd m^-2. Wide overlapping emission bands of the monomer and excimer ensure a device color rendering index (CRI) of above 80. In such a way the prospects of copper complexes as cost-effective materials for lighting devices are demonstrated, offering expense reduction through a cheaper emissive component and a simplified device architecture.

Conformational Engineering of Two-Coordinate Gold(I) Complexes: Regulation of Excited-State Dynamics for Efficient Delayed Fluorescence

Carbene-Au-amide (CMA) type complexes, in which the amide and carbene ligands act as an electron donor (D) and acceptor (A), respectively, can exhibit strong delayed fluorescence (DF) from a ligand to ligand charge transfer (LLCT) excited state. Although the coplanar donor-acceptor (D-A) conformation has been suggested to be a crucial factor favoring radiative decay of the charge-transfer excited state, the geometric structural factor underpinning the excited-state mechanism of CMA complexes remains an open question. We herein develop a new class of carbene-Au-carbazolate complexes by introducing large aromatic substituents onto the carbazolate ligand, the presence of which are conceived to restrict the rotation of the Au-N bond and thus confine a twisted D-A conformation in both ground and excited states. A highly twisted D-A orientation is found for the complexes in their crystal structures. Photophysical studies reveal that the twisted conformation induces a decrease in the gap (ΔE_ST) between the lowest singlet excited state (S₁) and the triplet manifold (T₁) and thus a faster reverse intersystem crossing (RISC) from T₁ to S₁ at the expense of oscillator strength for an S₁ radiative transition. In comparison with the coplanar analogue, the twisted complexes exhibit comparable or improved DF with quantum yields of up to 94% and short emission lifetimes down to sub-microseconds. The tuning of excited-state dynamics has been well interpreted by density functional theory (DFT) and time-dependent DFT (TDDFT) calculations, which unveil much faster RISC rates for twisted complexes. Solution-processed organic light-emitting diodes (OLEDs) based on the new CMA complexes show promising performances with almost negligible efficiency rolloff at a brightness of 1000 cd m^-2. This work implies that neither a coplanar ground-state D-A conformation nor a dynamic rotation of the M-N bond is the key to the realization of efficient DF for CMA complexes.

A Green Synthesis of Carbene-Metal-Amides (CMAs) and Carboline-Derived CMAs with Potent in vitro and ex vivo Anticancer Activity

The modularity and ease of synthesis of carbene-metal-amide (CMA) complexes based on the coinage metals (Au, Ag, Cu) and N-heterocyclic carbenes (NHCs) as ancillary ligands pave the way for the expansion of their applications beyond photochemistry and catalysis. Herein, we further improve the synthesis of such compounds by circumventing the use of toxic organic solvents which were previously required for their purification, and we expand their scope to include complexes incorporating carbolines as the amido fragments. The novel complexes are screened both in vitro and ex vivo, against several cancer cell lines and high-grade serous ovarian cancer (HGSOC) tumoroids, respectively. Excellent cytotoxicity values are obtained for most complexes, while the structural variety of the CMA library screened thus far, provides promising leads for future developments. Variations of all three components (NHC, metal, amido ligand), enable the establishment of trends regarding cytotoxicity and selectivity towards cancerous over normal cells.

Thermally Activated Delayed Fluorescence Mechanism of a Bicyclic "Carbene-Metal-Amide" Copper Compound: DFT/MRCI Studies and Roles of Excited-State Structure Relaxation

Herein we investigated the luminescence mechanism of one "carbene-metal-amide" copper compound with thermally activated delayed fluorescence (TADF) using density functional theory (DFT)/multireference configuration interaction, DFT, and time-dependent DFT methods with the polarizable continuum model. The experimentally observed low-energy absorption and emission peaks are assigned to the S₁ state, which exhibits clear interligand and partial ligand-to-metal charge-transfer character. Moreover, it was found that a three-state (S₀, S₁, and T₁) model is sufficient to describe the TADF mechanism, and the T₂ state should play a negligible role. The calculated S₁-T₁ energy gap of 0.10 eV and proper spin-orbit couplings facilitate the reverse intersystem crossing (rISC) from T₁ to S₁. At 298 K, the rISC rate of T₁ → S₁ (∼10⁶ s^-1) is more than 3 orders of magnitude larger than the T₁ phosphorescence rate (∼10³ s^-1), thereby enabling TADF. However, it disappears at 77 K because of a very slow rISC rate (∼10¹ s^-1). The calculated TADF rate, lifetime, and quantum yield agree very well with the experimental data. Methodologically, the present work shows that only considering excited-state information at the Franck-Condon point is insufficient for certain emitting systems and including excited-state structure relaxation is important.

Carbene-Metal Complexes As Molecular Scaffolds for Construction of through-Space Thermally Activated Delayed Fluorescence Emitters

The through-space charge transfer (CT) process is observed in Cu(I) carbene-metal-amide complexes, where conventional imidazole or imidazoline N-heterocyclic (NHC) carbene fragments act as inert linkers and CT proceeds between a metal-bound carbazole donor and a distantly situated carbene-bound phenylsulfonyl acceptor. The resulting electron transfer gives a rise to efficient thermally activated delayed fluorescence (TADF), characterized with high photoluminescence quantum yields (Φ_PL up to 90%) and radiative rates (k_r) up to 3.32 × 10⁵ s^-1. The TADF process is aided by fast reverse intersystem crossing (rISC) rates of up to 2.56 × 10⁷ s^-1. Such emitters can be considered as hybrids of two existing TADF emitter design strategies, combining low singlet-triplet energy gaps (ΔE_ST) met in all-organic exciplex-like emitters (0.0062-0.0075 eV) and small, but non-negligible spin-orbital coupling (SOC) provided by a Cu atom, like in TADF-active organometallic complexes.

Recent advances in the domain of Cyclic (alkyl)(amino) carbenes

Isolation of cyclic (alkyl) amino carbenes (cAACs) in 2005 has been a major achievement in the field of stable carbenes due to their better electronic properties. cAACs and bicyclic(alkyl)(amino)carbene (BicAAC) in essence are the most electrophilic as well as nucleophilic carbenes are known till date. Due to their excellent electronic properties in terms of nucleophilic and electrophilic character, cAACs have been utilized in different areas of chemistry, including stabilization of low valent main group and transition metal species, activation of small molecules, and catalysis. The applications of cAACs in catalysis have opened up new avenues of research in the field of cAAC chemistry. This review summarizes the major results of cAAC chemistry published until August 2021.

Tuning the luminescence of transition metal complexes with acyclic diaminocarbene ligands

Organometallics featuring acyclic diaminocarbene ligands have recently emerged as powerful emitters for use in electroluminescent technologies.

A simple synthetic entryway into new families of NHC-gold-amido complexes and their in vitro antitumor activity

A simple synthetic pathway to Au-NHC amido complexes is reported. Syntheses and isolation of [Au(NHC)(NR1R2)] complexes, bearing various NHC ligands and NH-containing heterocycles under mild conditions are described. The in...

Fabrication of a Solution-Processed White Light Emitting Diode Containing a Single Dimeric Copper(I) Emitter Featuring Combined TADF and Phosphorescence

Luminescent copper(I) complexes showing thermally activated delayed fluorescence (TADF) have developed to attractive emitter materials for organic light emitting diodes (OLEDs). Here, we study the brightly luminescent dimer Cu2Cl2(P∩N)2 (P∩N = diphenylphosphanyl-6-methyl-pyridine), which shows both TADF and phosphorescence at ambient temperature. A solution-processed OLED with a device structure ITO/PEDOT:PSS/PYD2: Cu2Cl2(P∩N)2/DPEPO (10 nm)/TPBi (40 nm)/LiF (1.2 nm)/Al (100 nm) shows warm white emission with moderate external quantum efficiency (EQE). Methods for EQE increase strategies are discussed.

Synthesis and photophysical properties of linear gold(I) complexes based on a CCC carbene

The reaction between allenylpyridine (L1) and (Me₂S)AuCl resulted in the quantitative formation of the (Indolizy)gold chloride complex 1 (Indolizy = indolizin-2-ylidene). The reaction of 1 with carbazole in the presence of KO^tBu affords the corresponding (Indolizy)Au(Cz) complex 2. Both compounds show high air- and temperature stability. The crystal structure of 2 confirmed the linear co-planar geometry. Complex 1 shows an intense low energy absorption of mixed character in the UV-vis spectrum, ascribed to intraligand and (M + Hal)L charge transfer processes, and exhibits bright yellow phosphorescence with an excited state lifetime of 62.8 μs in the crystal and a luminescence quantum yield up to 65%. On the other hand, the carbazolate complex 2 in a polystyrene matrix shows bright red delayed fluorescence at 617 nm with a sub-microsecond excited state lifetime and a quantum yield of 21.6%.

Highly Efficient Thermally Activated Delayed Fluorescence from Pyrazine-Fused Carbene Au(I) Emitters

Metal-based thermally activated delayed fluorescence (TADF) is conceived to inherit the advantages of both phosphorescent metal complexes and purely organic TADF compounds for high-performance electroluminescence. Herein a panel of new TADF Au(I) emitters has been designed and synthesized by using carbazole and pyrazine-fused nitrogen-heterocyclic carbene (NHC) as the donor and acceptor ligands, respectively. Single-crystal X-ray structures show linear molecular shape and coplanar arrangement of the donor and acceptor with small dihedral angles of <6.5°. The coplanar orientation and appropriate separation of the HOMO and LUMO in this type of molecules favour the formation of charge-transfer excited state with appreciable oscillator strength. Together with a minor but essential heavy atom effect of Au ion, the complexes in doped films exhibit highly efficient (Φ∼0.9) and short-lived (<1 μs) green emissions via TADF. Computational studies on this class of emitters have been performed to decipher the key reverse intersystem crossing (RISC) pathway. In addition to a small energy splitting between the lowest singlet and triplet excited states (ΔE_ST ), the spin-orbit coupling (SOC) effect is found to be larger at a specific torsion angle between the donor and acceptor planes which favours the RISC process the most. This work provides an alternative molecular design to TADF Au(I) carbene emitters for OLED application.

Recent advances in the synthesis and derivatization of N-heterocyclic carbene metal complexes

N-heterocyclic carbene (NHC) metal complexes have gained an incredible amount of attention in the course of the last two decades and have become indispensable as an intricate part of a plethora of applications. The areas of their synthesis and derivatization are constantly evolving and bring new, more sustainable, cost-effective and simpler approaches to the design of existing and next generation catalysts and materials. This article provides an overview of the latest developments, focusing on those which have appeared during the last two years.

Main Avenues in Gold Coordination Chemistry

In this contribution, we provide an overview of the main avenues that have emerged in gold coordination chemistry during the last years. The unique properties of gold have motivated research in gold chemistry, and especially regarding the properties and applications of gold compounds in catalysis, medicine, and materials chemistry. The advances in the synthesis and knowledge of gold coordination compounds have been possible with the design of novel ligands becoming relevant motifs that have allowed the preparation of elusive complexes in this area of research. Strong donor ligands with easily modulable electronic and steric properties, such as stable singlet carbenes or cyclometalated ligands, have been decisive in the stabilization of gold(0) species, gold fluoride complexes, gold hydrides, unprecedented π complexes, or cluster derivatives. These new ligands have been important not only from the fundamental structure and bonding studies but also for the synthesis of sophisticated catalysts to improve activity and selectivity of organic transformations. Moreover, they have enabled the facile oxidative addition from gold(I) to gold(III) and the design of a plethora of complexes with specific properties.

Simple Synthetic Routes to Carbene-M-Amido (M=Cu, Ag, Au) Complexes for Luminescence and Photocatalysis Applications

The development of novel and operationally simple synthetic routes to carbene‐metal‐amido (CMA) complexes of copper, silver and gold relevant for photonic applications are reported. A mild base and sustainable solvents allow all reactions to be conducted in air and at room temperature, leading to high yields of the targeted compounds even on multigram scales. The effect of various mild bases on the N−H metallation was studied in silico and experimentally, while a mechanochemical, solvent‐free synthetic approach was also developed. Our photophysical studies on [M(NHC)(Cbz)] (Cbz=carbazolyl) indicate that the occurrence of fluorescent or phosphorescent states is determined primarily by the metal, providing control over the excited state properties. Consequently, we demonstrate the potential of the new CMAs beyond luminescence applications by employing a selected CMA as a photocatalyst. The exemplified synthetic ease is expected to accelerate the applications of CMAs in photocatalysis and materials chemistry.

P∩N Bridged Cu(I) Dimers Featuring Both TADF and Phosphorescence. From Overview towards Detailed Case Study of the Excited Singlet and Triplet States

We present an overview over eight brightly luminescent Cu(I) dimers of the type Cu₂X₂(P∩N)₃ with X = Cl, Br, I and P∩N = 2-diphenylphosphino-pyridine (Ph₂Ppy), 2-diphenylphosphino-pyrimidine (Ph₂Ppym), 1-diphenylphosphino-isoquinoline (Ph₂Piqn) including three new crystal structures (Cu₂Br₂(Ph₂Ppy)₃ 1-Br, Cu₂I₂(Ph₂Ppym)₃ 2-I and Cu₂I₂(Ph₂Piqn)₃ 3-I). However, we mainly focus on their photo-luminescence properties. All compounds exhibit combined thermally activated delayed fluorescence (TADF) and phosphorescence at ambient temperature. Emission color, decay time and quantum yield vary over large ranges. For deeper characterization, we select Cu₂I₂(Ph₂Ppy)₃, 1-I, showing a quantum yield of 81%. DFT and SOC-TDDFT calculations provide insight into the electronic structures of the singlet S₁ and triplet T₁ states. Both stem from metal+iodide-to-ligand charge transfer transitions. Evaluation of the emission decay dynamics, measured from 1.2 ≤ T ≤ 300 K, gives ∆E(S₁-T₁) = 380 cm⁻¹ (47 meV), a transition rate of k(S₁→S₀) = 2.25 × 10⁶ s⁻¹ (445 ns), T₁ zero-field splittings, transition rates from the triplet substates and spin-lattice relaxation times. We also discuss the interplay of S₁-TADF and T₁-phosphorescence. The combined emission paths shorten the overall decay time. For OLED applications, utilization of both singlet and triplet harvesting can be highly favorable for improvement of the device performance.