Ultrathin tin monosulfide nanosheets with the exposed (001) plane for efficient electrocatalytic conversion of CO2 into formate

Gas Sensing Properties of PLD Grown 2D SnS Film: Effect of Film Thickness, Metal Nanoparticle Decoration, and In Situ KPFM Investigation

This study employs novel growth methodologies and surface sensitization with metal nanoparticles to enhance and manipulate gas sensing behavior of two-dimensional (2D)SnS film. Growth of SnS films is optimized by varying substrate temperature and laser pulses during pulsed laser deposition (PLD). Thereafter, palladium (Pd), gold (Au), and silver (Ag) nanoparticles are decorated on as-grown film using gas-phase synthesis techniques. X-ray diffraction (XRD), Raman spectroscopy, and Field-emission scanning electron microscopy (FESEM) elucidate the growth evolution of SnS and the effect of nanoparticle decoration. X-ray photoelectron spectroscopy (XPS) analyses the chemical state and composition. Pristine SnS, Ag, and Au decorated SnS films are sensitive and selective toward NO2 at room temperature (RT). Ag nanoparticle increases the response of pristine SnS from 48 to 138% toward 2 ppm NO2, which indicates electronic and chemical sensitization effect of Ag. Pd decoration on SnS tunes its selectivity toward H2 gas with a response of 55% toward 70 ppm H2 and limit of detection (LOD) < 1 ppm. In situ Kelvin probe force microscopy (KPFM) maps the work function changes, revealing catalytic effect of Ag toward NO2 in Ag-decorated SnS and direct charge transfer between Pd and SnS during H2 exposure in Pd-decorated SnS.

Metal-Organic Framework Derived Bi-O-Sn/C Nanostructure: Tailoring the Adsorption Site of Dominant Intermediate for Highly Efficient CO2 Electroreduction to Formate

Electrochemical CO2 reduction into high-value-added formic acid/formate is an attractive strategy to mitigate global warming and achieve energy sustainability. However, the adsorption energy of most catalysts for the key intermediate *OCHO is usually weak, and how to rationally optimize the adsorption of *OCHO is challenging. Here, an effective Bi-Sn bimetallic electrocatalyst (Bi1 -O-Sn1 @C) where a Bi-O-Sn bridge-type nanostructure is constructed with O as an electron bridge is reported. The electronic structure of Sn is precisely tuned by electron transfer from Bi to Sn through O bridge, resulting in the optimal adsorption energy of intermediate *OCHO on the surface of Sn and the enhanced activity for formate production. Thus, the Bi1 -O-Sn1 @C exhibits an excellent Faradaic efficiency (FE) of 97.7% at -1.1 V (vs RHE) for CO2 reduction to formate (HCOO- ) and a high current density of 310 mA cm-2 at -1.5 V, which is one of the best results catalyzed by Bi- and Sn-based catalysts reported previously. Impressively, the FE exceeds 93% at a wide potential range from -0.9 to -1.4 V. In-situ ATR-FTIR, in-situ Raman, and DFT calculations confirm the unique role of the bridge-type structure of Bi-O-Sn in highly efficient electrocatalytic reduction of CO2 into formate.

Advances in the Stability of Catalysts for Electroreduction of CO2 to Formic Acid

The electroreduction of CO2 to high-value products is a promising approach for achieving carbon neutrality. Among these products, formic acid stands out as having the most potential for industrialization due to its optimal economic value in terms of consumption and output. In recent years, the Faraday efficiency of formic acid from CO2 electroreduction has reached 90~100 %. However, this high selectivity cannot be maintained for extended periods under high currents to meet industrial requirements. This paper reviews excellent work from the perspective of catalyst stability, summarizing and discussing the performance of typical catalysts. Strategies for preparing stable and highly active catalysts are also briefly described. This review may offer a useful data reference and valuable guidance for the future design of long-stability catalysts.

Designing N-Confused Metalloporphyrin-Based Covalent Organic Frameworks for Enhanced Electrocatalytic Carbon Dioxide Reduction

Electrochemical conversion of carbon dioxide (CO2 ) into value-added products is promising to alleviate greenhouse gas emission and energy demands. Metalloporphyrin-based covalent organic frameworks (MN4 -Por-COFs) provide a platform for rational design of electrocatalyst for CO2 reduction reaction (CO2 RR). Herein, through systematic quantum-chemical studies, the N-confused metallo-Por-COFs are reported as novel catalysts for CO2 RR. For MN4 -Por-COFs, among the ten 3d metals, M = Co/Cr stands out in catalyzing CO2 RR to CO or HCOOH; hence, N-confused Por-COFs with Co/CrN3 C1 and Co/CrN2 C2 centers are designed. Calculations indicate CoNx Cy -Por-COFs exhibit lower limiting potential (-0.76 and -0.60 V) for CO2 -to-CO reduction than its parent CoN4 -Por-COFs (-0.89 V) and make it feasible to yield deep-reduction degree C1 products CH3 OH and CH4 . Electronic structure analysis reveals that substituting CoN4 to CoN3 C1 /CoN2 C2 increases the electron density on Co-atom and raises the d-band center, thus stabilizing the key intermediates of the potential determining step and lowering the limiting potential. For similar reason, changing the core from CrN4 to CrN3 C1 /CrN2 C2 lowers the limiting potential for CO2 -to-HCOOH reduction. This work predicts N-confused Co/CrNx Cy -Por-COFs to be high-performance CO2 RR catalyst candidates. Inspiringly, as a proof-of-concept study, it provides an alternative strategy for coordination regulation and theoretical guidelines for rational design of catalysts.

Copper-based catalysts for the electrochemical reduction of carbon dioxide: progress and future prospects

There is an urgent need for the development of high performance electrocatalysts for the CO₂ reduction reaction (CO₂RR) to address environmental issues such as global warming and achieve carbon neutral energy systems. In recent years, Cu-based electrocatalysts have attracted significant attention in this regard. The present review introduces fundamental aspects of the electrocatalytic CO₂RR process together with a systematic examination of recent developments in Cu-based electrocatalysts for the electroreduction of CO₂ to various high-value multicarbon products. Current challenges and future trends in the development of advanced Cu-based CO₂RR electrocatalysts providing high activity and selectivity are also discussed.

Nanostructure Engineering of Sn-Based Catalysts for Efficient Electrochemical CO2 Reduction

Excessive anthropogenic CO₂ emission has caused a series of ecological and environmental issues, which threatens mankind's sustainable development. Mimicking the natural photosynthesis process (i.e., artificial photosynthesis) by electrochemically converting CO₂ into value-added products is a promising way to alleviate CO₂ emission and relieve the dependence on fossil fuels. Recently, Sn-based catalysts have attracted increasing research attentions due to the merits of low price, abundance, non-toxicity, and environmental benignancy. In this review, the paradigm of nanostructure engineering for efficient electrochemical CO₂ reduction (ECO₂ R) on Sn-based catalysts is systematically summarized. First, the nanostructure engineering of size, composition, atomic structure, morphology, defect, surficial modification, catalyst/substrate interface, and single-atom structure, are systematically discussed. The influence of nanostructure engineering on the electronic structure and adsorption property of intermediates, as well as the performance of Sn-based catalysts for ECO₂ R are highlighted. Second, the potential chemical state changes and the role of surface hydroxides on Sn-based catalysts during ECO₂ R are introduced. Third, the challenges and opportunities of Sn-based catalysts for ECO₂ R are proposed. It is expected that this review inspires the further development of highly efficient Sn-based catalysts, meanwhile offer protocols for the investigation of Sn-based catalysts.

Highly selective electrocatalytic reduction of CO2 to HCOOH over an in situ derived hydrocerussite thin film on a Pb substrate

A metal oxide electrode has been developed for the electrochemical CO₂ reduction reaction (eCO₂RR). It exhibits superior activity and product selectivity towards eCO₂RR by circumventing the previously encountered problem of self-reduction with high-valence metals. Specifically, a hydrocerussite [Pb₃(CO₃)₂(OH)₂] thin film has been synthesized in situ on a Pb substrate (denoted as ER-HC) by an electroreduction method using a lead-based metal-organic framework (Pb-MOF) as a precursor. The ER-HC electrode exhibits a high selectivity of 96.8% towards HCOOH production with a partial current density of 1.9 mA cm^-2 at -0.88 V vs. the reversible hydrogen electrode (RHE). A higher HCOOH partial current density of 7.3 mA cm^-2 has been achieved at -0.98 V vs. RHE. Physicochemical and electrochemical characterization results demonstrate that the defective hydrocerussite surface exhibits appropriate adsorption free energy of formate (HCOO^-) and a lower reaction free energy for HCOOH production from CO₂, which greatly boosts the eCO₂RR activity and HCOOH production selectivity. The structure and eCO₂RR performance of the hydrocerussite thin film remain stable in 0.1 M KHCO₃ as electrolyte, ensuring its durability. Overall, this work not only provides a metal oxide electrode (metal hydroxide, to be more precise) with excellent eCO₂RR performance, but also expands the in situ electrochemical derivatization strategy for the fabrication of metal oxide electrodes.

Lattice-dislocated Bi nanosheets for electrocatalytic reduction of carbon dioxide to formate over a wide potential window

Electrochemical reduction of CO₂ to HCOOH (ERC-HCOOH) is one of the most feasible and economically valuable ways to achieve carbon neutrality. Unfortunately, achieving optimal activity and selectivity for ERC-HCOOH remains a challenge. Herein, ultrathin Bi nanosheets (NS) with lattice dislocations (LD-Bi) were prepared by the topological transformation of Bi₂O₂CO₃ NS under high current conditions. LD-Bi exhibited excellent activity and selectivity as well as stability in ERC-HCOOH. Electrochemical tests and DFT calculations revealed that the excellent performance of LD-Bi was attributed to lattice dislocations, which can induce the production of more active sites on the catalyst surface and improve the electronic transfer ability. In addition, LD-Bi was beneficial to enhance the adsorption of CO₂ and key reaction intermediates (OCHO*), thus improving the reaction kinetics. The result provides a unique perspective on the crucial role of lattice dislocations, which may have a significant impact on highly selective electrochemical conversion of CO₂.

In Situ Phase Separation into Coupled Interfaces for Promoting CO2 Electroreduction to Formate over a Wide Potential Window

Bimetallic sulfides are expected to realize efficient CO₂ electroreduction into formate over a wide potential window, however, they will undergo in situ structural evolution under the reaction conditions. Therefore, clarifying the structural evolution process, the real active site and the catalytic mechanism is significant. Here, taking Cu₂ SnS₃ as an example, we unveiled that Cu₂ SnS₃ occurred self-adapted phase separation toward forming the stable SnO₂ @CuS and SnO₂ @Cu₂ O heterojunction during the electrochemical process. Calculations illustrated that the strongly coupled interfaces as real active sites driven the electron self-flow from Sn⁴⁺ to Cu⁺ , thereby promoting the delocalized Sn sites to combine HCOO* with H*. Cu₂ SnS₃ nanosheets achieve over 83.4 % formate selectivity in a wide potential range from -0.6 V to -1.1 V. Our findings provide insight into the structural evolution process and performance-enhanced origin of ternary sulfides under the CO₂ electroreduction.

Electronic Tuning of SnS2 Nanosheets by Hydrogen Incorporation for Efficient CO2 Electroreduction

Surface functionalization with atoms serves as an important strategy to modulate the catalytic activities of low-dimensional nanomaterials. Herein, we developed a facile hydrogen incorporation strategy for improving the catalytic activities of SnS₂ nanosheets toward CO₂ electroreduction. Compared with SnS₂ nanosheets, the hydrogen-incorporated SnS₂ (denoted as H-SnS₂) nanosheets exhibited high current density and Faradaic efficiency (FE) for formate. At -0.9 V vs RHE, H-SnS₂ nanosheets displayed a maximum FE of 93% for carbonaceous product, which rivals the activities of most Sn-based catalysts in CO₂ electroreduction. Mechanistic studies disclosed that the incorporation of surface hydrogen induced the electron injection into the structures of H-SnS₂ nanosheets, which largely facilitates the process of CO₂ activation. Density functional theory (DFT) calculations further revealed that hydrogen incorporation decreased the energy barrier for the formation of HCOO* intermediates, thus contributing to the CO₂-to-formate conversion on H-SnS₂ nanosheets.

Large-Area Vertically Aligned Bismuthene Nanosheet Arrays from Galvanic Replacement Reaction for Efficient Electrochemical CO2 Conversion

There is a lack of straightforward methods to prepare high-quality bismuthene nanosheets, or, even more challengingly, to grow their arrays due to the low melting point and high oxophilicity of bismuth. This synthetic obstacle has hindered their potential applications. In this work, it is demonstrated that the galvanic replacement reaction can do the trick. Under well-controlled conditions, large-area vertically aligned bismuthene nanosheet arrays are grown on Cu substrates of various shapes and sizes. The product features small nanosheet thickness of two to three atomic layers, large surface areas, and abundant porosity between nanosheets. Most remarkably, bismuthene nanosheet arrays grown on Cu foam can enable efficient CO₂ reduction to formate with high Faradaic efficiency of >90%, large current density of 50 mA cm^-2 , and great stability.

An Investigation of Active Sites for electrochemical CO2 Reduction Reactions: From In Situ Characterization to Rational Design

The electrochemical carbon dioxide (CO2) reduction reaction (CO2RR) is among the most promising approaches used to transform greenhouse gas into useful fuels and chemicals. However, the reaction suffers from low selectivity, high overpotential, and low reaction rate. Active site identification in the CO2RR is vital for the understanding of the reaction mechanism and the rational development of new electrocatalysts with both high selectivity and stability. Herein, in situ characterization monitoring of active sites during the reaction is summarized and a general understanding of active sites on the various catalysts in the CO2RR, including metal-based catalysts, carbon-based catalysts, and metal-organic frameworks-based electrocatalysts is updated. For each type of electrocatalysts, the reaction pathway and real active sites are proposed based on in situ characterization techniques and theoretical calculations. Finally, the key limitations and challenges observed for the electrochemical fixation of CO2 is presented. It is expected that this review will provide new insights and directions into further scientific development and practical applicability of CO2 electroreduction.

Three-dimensional porous copper-decorated bismuth-based nanofoam for boosting the electrochemical reduction of CO2 to formate

A Cu-decorated Bi/Bi₂O₃ nanofoam with a 3D porous network structure was assembled, which exhibits excellent electrocatalytic performance toward electrocatalytic CO₂ reduction owing to the optimized morphology and electronic structure.

Formate-Selective CO2 Electrochemical Reduction with a Hydrogen-Reduction-Suppressing Bronze Alloy Hollow-Fiber Electrode

Electroreduction carbon dioxide into formate has been regarded as a hopeful measure to relieve global warming. Copper-based hollow fibers demonstrated good performances on converting carbon dioxide in previous researches. Herein Cu-Sn alloy hollow fibers were synthesized in an innovative way, combining the structure advantages of hollow fiber and high selectivity towards formate on η' bronze. Tests under different gas injection conditions were conducted to analyze the contribution of the hollow fiber structure on suppression of hydrogen evolution and promotion on kinetics. Strikingly, Cu-Sn_45 % hollow fiber, the optimal catalyst in this work, achieved a highest faradaic efficiency towards formate of 90.96 % at a lower potential of -0.75 V vs. RHE than most non-noble catalysts, and the FE of H₂ was below 4 %.