Use of nanotechnology-based nanomaterial as a substitute for antibiotics in monogastric animals

Nanotechnology has emerged as a promising solution for tackling antibiotic resistance in monogastric animals, providing innovative methods to enhance animal health and well-being. This review explores the novel use of nanotechnology-based nanomaterials as substitutes for antibiotics in monogastric animals. With growing global concerns about antibiotic resistance and the need for sustainable practices in animal husbandry, nanotechnology offers a compelling avenue to address these challenges. The objectives of this review are to find out the potential of nanomaterials in improving animal health while reducing reliance on conventional antibiotics. We examine various forms of nanomaterials and their roles in promoting gut health and also emphasize fresh perspectives brought by integrating nanotechnology into animal healthcare. Additionally, we delve into the mechanisms underlying the antibacterial properties of nanomaterials and their effectiveness in combating microbial resistance. By shedding light on the transformative role of nanotechnology in animal production systems. This review contributes to our understanding of how nanotechnology can provide safer and more sustainable alternatives to antibiotics.

Bioactive Dental Resin Composites with MgO Nanoparticles

Photoactivating dental resin composites have been the most prevailing material for repairing dental defects in various clinical scenarios due to their multiple advantages. However, compared to other restorative materials, the surface of resin-based composites is more susceptible to plaque biofilm accumulation, which can lead to secondary caries and restoration failure. This study introduced different weight fractions (1, 2, 5, 10, and 15%) of magnesium oxide nanoparticles (MgONPs) as antibacterial fillers into dental resin composites. Multifarious properties of the material were investigated, including antibacterial activity against a human salivary plaque-derived biofilm, cytotoxicity on human gingival fibroblasts, mechanical and physicochemical properties as well as the performance when subjected to thermocycling aging treatment. Results showed that the incorporation of MgONPs significantly improved the composites' anti-biofilm capability even at a low amount of 2 wt % without compromising the mechanical, physicochemical, and biocompatibility performances. The results of the thermocycling test suggested certain of aging resistance. Moreover, a small amount of MgONPs possibly made a difference in enhancing photoactivated polymerization and increasing the curing depth of experimental resin composites. Overall, this study highlights the potential of MgONPs as an effective strategy for developing antibacterial resin composites, which may help mitigating cariogenic biofilm-associated secondary caries.

Effects of Different Nanoparticles on Microbes

Nanoparticles widely exist in nature and may be formed through inorganic or organic pathways, exhibiting unique physical and chemical properties different from those of bulk materials. However, little is known about the potential consequences of nanomaterials on microbes in natural environments. Herein, we investigated the interactions between microbes and nanoparticles by performing experiments on the inhibition effects of gold, ludox and laponite nanoparticles on Escherichia coli in liquid Luria–Bertani (LB) medium at different nanoparticle concentrations. These nanoparticles were shown to be effective bactericides. Scanning electron microscopy (SEM) images revealed the distinct aggregation of cells and nanoparticles. Transmission electron microscopy (TEM) images showed considerable cell membrane disruption due to nanoparticle accumulation on the cell surfaces, resulting in cell death. We hypothesized that this nanoparticle accumulation on the cell surfaces not only disrupted the cell membranes but also physically blocked the microbes from accessing nutrients. An iron-reducing bacterium, Shewanella putrefaciens, was tested for its ability to reduce the Fe (III) in solid ferrihydrite (HFO) or aqueous ferric citrate in the presence of laponite nanoparticles. It was found that the laponite nanoparticles inhibited the reduction of the Fe (III) in solid ferrihydrite. Moreover, direct contact between the cells and solid Fe (III) coated with the laponite nanoparticles was physically blocked, as confirmed by SEM images and particle size measurements. However, the laponite particles had an insignificant effect on the extent of aqueous Fe (III) bioreduction but slightly enhanced the rate of bioreduction of the Fe (III) in aqueous ferric citrate. The slightly increased rate of bioreduction by laponite nanoparticles may be due to the removal of inhibitory Fe (II) from the cell surface by its sorption onto the laponite nanoparticle surface. This result indicates that the scavenging of toxic heavy metals, such as Fe (II), by nanoparticles may be beneficial for microbes in the environment. On the other hand, microbial cells are also capable of detoxifying nanoparticles by coagulating nanoparticles with extracellular polymeric substances or by changing nanoparticle morphologies. Hence, the interactions between microbes and nanoparticles in natural environments should receive more attention.

Facile Green Synthesis of Ni(OH)2@Mn3O4 Cactus-Type Nanocomposite: Characterization and Cytotoxicity Properties

In the present work, the facile eco-friendly synthesis and evaluation of the anti-tumor activity of Ni(OH)₂@Mn₃O₄ nanocomposite were carried out. The synthesis of Ni(OH)₂@Mn₃O₄ nanocomposite from chia-seed extract was mediated by sonication. The obtained materials were characterized by different spectroscopic techniques such as transmission electron microscopy (TEM), scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), ultraviolet-visible (UV-Vis), and Fourier transform infrared (FT-IR) spectroscopies. The results of XRD, SEM, EDS, TEM, FT-IR, and UV-Vis analysis indicate the successful manufacturing of a crystalline, cactus-type Ni(OH)₂@Mn₃O₄ nanocomposite of 10.10 nm average particle size. XPS analysis confirms that the synthesized materials consist mainly of Ni²⁺, Mn²⁺, and Mn³⁺. The antitumor activity of the nanocomposite was tested against a breast cancer (MCF-7) cell line. The results showed Ni(OH)₂@Mn₃O₄ nanocomposite possesses insignificant cytotoxicity. The cell-death percentage was 34% at a 100 ppm concentration of Ni(OH)₂@Mn₃O₄ nanocomposite. The obtained results imply that the synthesized nanocomposite could be suitable and safe for drug delivery and water treatment.

A Study on the Effect of Nanoscale MgO and Hydrogen Bonding in Nanofiber Mats for the Controlled Drug Release along with In Vitro Breast Cancer Cell Line and Antimicrobial Studies

Nanosized metal oxide-incorporated drug carriers have received significant attention due to their biocompatibility, mechanical strength, controlled drug release, and biodegradability. Herein, an attempt was made to fabricate polycaprolactone-based electrospun nanofiber mats involving the 5-fluorouracil (5Fu) drug, MgO nanoparticle, methyl cellulose, and polyethylene glycol. The chemical interactions, surface wettability, mechanical properties, structural and morphological changes, and thermal stability were studied by the respective analyses. The ionic interaction between 5Fu, MgO, and polymers were found to be responsible for the controlled drug release. Zero-order kinetic and model data also revealed that a controlled drug release pattern was observed in a period of 16 days. Furthermore, the nanofiber mats were subjected to cytotoxicity studies against MDA-MB-231 cancer cell line and the results showed higher cytotoxicity in a short time of 24 h and less toxicity to normal L929 fibroblast cell line. The apoptosis in cancer cell lines was also tested by AO/PI staining assay and confirmed by fluorescence microscopy. In addition, the growth inhibition of several bacterial and fungal strains was tested for the mats and the results exhibited good inhibition activity. Hence, the reported nanofiber drug carrier was found to be an efficient implant for the controlled release of anticancer drug along with other significant properties.

Dual regulation of osteoclastogenesis and osteogenesis for osteoporosis therapy by iron oxide hydroxyapatite core/shell nanocomposites

Osteoporosis is a skeletal disorder resulted in significant structural and functional changes, arousing a wide concern for the high prevalence and cost. Imbalance between osteoclastogenesis and osteogenesis have been verified as a main pathology etiology and considered an efficient therapy target in both clinical and pre-clinical studies. In recent years, inorganic nanomaterials have shown provable activities on osteoclastogenesis inhibition and osteogenesis promotion, respectively. Hence, in this study, a class of hydroxyapatite coated superparamagnetic iron oxide nanoparticles (SPIO@HA) were developed with a core-shell structure for targeting both osteoclastogenesis and osteogenesis. The optimal ratio of SPIO@15HA (Fe/Ca = 1:15, mol/mol) was screened to obtain dual function for inducing both bone formation and preventing bone resorption. The obtained nanocomposites significantly prevented the bone loss of ovariectomized (OVX) mice and increased bone mineral density (BMD) by 9.4%, exhibiting high bone accumulation in magnetic resonance imaging evaluation and reasonable biosafety profile. The mechanism study revealed that SPIO@15HA can suppress bone marrow monocyte derived osteoclast differentiation through TRAF6-p62-CYLD signaling complex regulation. Meanwhile, it could activate MSC osteogenic differentiation by TGF-β, PI3K-AKT and calcium signaling pathway regulation. Moreover, incubation of SPIO@15HA with MSC resulted in several cytokines overexpression such as osteoprotegerin (OPG), CSF2, CCL2 etc., which are responsible for maintaining the bone remodeling balance. The dual function of as-prepared SPIO@15HA may find a new way for designing of inorganic components containing core/shell nanomaterials for osteoporosis treatment.

Graphene Oxide-Doped MgO Nanostructures for Highly Efficient Dye Degradation and Bactericidal Action

Various concentrations (0.01, 0.03 and 0.05 wt ratios) of graphene oxide (GO) nanosheets were doped into magnesium oxide (MgO) nanostructures using chemical precipitation technique. The objective was to study the effect of GO dopant concentrations on the catalytic and antibacterial behavior of fixed amount of MgO. XRD technique revealed cubic phase of MgO, while its crystalline nature was confirmed through SAED profiles. Functional groups presence and Mg-O (443 cm-1) in fingerprint region was evident with FTIR spectroscopy. Optical properties were recorded via UV-visible spectroscopy with redshift pointing to a decrease in band gap energy from 5.0 to 4.8 eV upon doping. Electron-hole recombination behavior was examined through photoluminescence (PL) spectroscopy. Raman spectra exhibited D band (1338 cm-1) and G band (1598 cm-1) evident to GO doping. Formation of nanostructure with cubic and hexagon morphology was confirmed with TEM, whereas interlayer average d-spacing of 0.23 nm was assessed using HR-TEM. Dopants existence and evaluation of elemental constitution Mg, O were corroborated using EDS technique. Catalytic activity against methyl blue ciprofloxacin (MBCF) was significantly reduced (45%) for higher GO dopant concentration (0.05), whereas bactericidal activity of MgO against E. coli was improved significantly (4.85 mm inhibition zone) upon doping with higher concentration (0.05) of GO, owing to the formation of nanorods.

Mn3O4 nanoparticles: Synthesis, characterization and their antimicrobial and anticancer activity against A549 and MCF-7 cell lines

Due to their inexpensive and eco-friendly nature, and existence of manganese in various oxidation states and their natural abundance have attained significant attention for the formation of Mn₃O₄ nanoparticles (Mn₃O₄ NPs). Herein, we report the preparation of Mn₃O₄ nanoparticles using manganese nitrate as a precursor material by utilization of a precipitation technique. The as-prepared Mn₃O₄ nanoparticles (Mn₃O₄ NPs) were characterized by using X-ray powder diffraction (XRD), UV-Visible spectroscopy (UV-Vis), High-Resolution Transmission electron microscopy (HRTEM), Field emission scanning electron microscopy (FESEM), Thermal gravimetric analysis (TGA) and Fourier-transform infrared spectroscopy (FT-IR). The antimicrobial properties of the as-synthesized Mn₃O₄ nanoparticles were investigated against numerous bacterial and fungal strains including S. aureus, E. coli, B. subtilis, P. aeruginosa, A. flavus and C. albicans. The Mn₃O₄ NPs inhibited the growth of S. aureus with a minimum inhibitory concentration (MIC) of 40 μg/ml and C. albicans with a MIC of 15 μg/ml. Furthermore, the Mn₃O₄ NPs anti-cancer activity was examined using MTT essay against A549 lung and MCF-7 breast cancer cell lines. The Mn₃O₄ NPs revealed significant activity against the examined cancer cell lines A549 and MCF-7. The IC₅₀ values of Mn₃O₄ NPs with A549 cell line was found at concentration of 98 µg/mL and MCF-7 cell line was found at concentration of 25 µg/mL.

Biodegradable Poly(butylene adipate-co-terephthalate) Antibacterial Nanocomposites Reinforced with MgO Nanoparticles

Antibacterial packaging materials can reduce the microbial contamination of food surfaces. In this study, magnesium oxide (MgO) nanoparticles were synthesized and then coated with cetrimonium bromide (CTAB). CTAB-modified MgO (MgO@CTAB) was characterized by Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and thermogravimetric analysis. Then, different loadings of MgO@CTAB were mixed with poly(butylene adipate-co-terephthalate) (PBAT) by melt compounding. The results showed that the addition of MgO@CTAB deteriorated the thermal stability of PBAT due to MgO serving as a catalyst to promote the thermal degradation of PBAT. In addition, MgO@CTAB could serve as a nucleating agent to improve the crystallinity of PBAT. With the optimal 3 wt% of MgO@CTAB, the tensile strength of PBAT/MgO@CTAB increased from 26.66 to 29.90 MPa, with a slight enhancement in elongation at break. SEM observations and dynamical rheological measurements revealed that aggregation occurred when the content of MgO@CTAB exceeded 5 wt%. The presence of MgO@CTAB endowed PBAT with antibacterial properties. The bacterial inhibition zone increased with the increasing content of MgO@CTAB. In addition, MgO@CTAB had a better antibacterial efficiency against Gram-positive bacterial S. aureus than Gram-negative bacterial E. coli.

An insight into the mechanism of antibacterial activity by magnesium oxide nanoparticles

The exact mechanism behind the antibacterial efficacy of nanoparticles has remained unexplored to date. This study aims to shed light the mechanism adopted using magnesium oxide nanoparticles prepared in ethyl alcohol against gram-negative and gram-positive bacterial cells, and the generation of reactive oxygen species (ROS) is proposed to be the dominant mechanism. This paradigm is supported by the quantification of the hydroxyl radical and superoxide anions produced in the nanoparticle treated and untreated bacterial solutions, and by the reduction of the antibacterial efficiency after the addition of a radical scavenger. The production of free Mg2+ ions from the nanoparticle is supposed to be the causative agent behind this uncontrolled ROS generation, resulting in excessive oxidative stress, which the antioxidants of the bacterial cells are unable to nullify, leading to cell damage. The amount of proteins, carbohydrates and lipids leaked due to the distortion of the cellular membrane is also quantified, and it is observed that their leakage trend varies on the structure of the bacterial cell. FESEM images taken at certain time intervals show the gradual internalization of the nanoparticles, and increasing rupture of bacterial cell membranes, leading to cell necrosis.

Cardanol-derived cationic surfactants enabling the superior antibacterial activity of single-walled carbon nanotubes

Single-walled carbon nanotubes (SWCNTs) are potential antibacterial material, and their antibacterial activity in aqueous solutions depends on efficient surfactants to create strong interactions between well-dispersed SWCNTs and bacterial cells. Here, we designed and synthesized a new family of cationic surfactants by introducing different positively charged hydrophilic heads, i.e. -(CH₂)₆N⁺(CH₃)₃Br^-, -(CH₂)₂N⁺(CH₃)₃Br^- and -(CH₂)₂N⁺PyridineBr^-, to cardanol obtained from cashew nut shell liquid. These surfactants can efficiently disperse SWCNTs in aqueous solutions because benzene rings and olefin chains in cardanol enable their strong π-stacking on SWCNTs. A much higher fraction of SWCNTs can be dispersed individually compared to the commonly used surfactant, dodecylbenzene-sulfonate sodium (SDBS). SWCNTs dispersed in the cardanol-derived surfactants demonstrate significantly improved antibacterial activity. At the concentration of 0.5 wt%, their minimum inhibitory concentration is 0.33 and 0.02 μg ml^-1 against E. coli and S. aureus, respectively, which is only 0.8%-1.5% of that of SDBS-dispersed SWCNTs. The strong antibacterial activity can be attributed to both better dispersion of SWCNTs and positive charges introduced by hydrophilic heads, which are attracted to negatively charged bacterial cell surfaces. These cardanol-derived surfactants are promising as sustainable surfactants for enabling various SWCNT applications.