A paper-based conductive immunosensor for the determination of Salmonella Typhimurium

A comprehensive review of aptamer screening and application for lateral flow strip: Current status and future perspectives

The detection of biomarkers is of great significance for medical diagnosis, food safety, environmental monitoring, and agriculture. However, bio-detection technology at present often necessitates complex instruments, expensive reagents, specialized expertise, and prolonged procedures, making it challenging to fulfill the demand for rapid, sensitive, user-friendly, and economical testing. In contrast, lateral flow strip (LFS) technology offers simple, fast, and visually accessible detection modality, allowing real-time analysis of clinical specimens, thus finding widespread utility across various domains. Within the realm of LFS, the application of aptamers as molecular recognition probes presents distinct advantages over antibodies, including cost-effectiveness, smaller size, ease of synthesis, and chemical stability. In recent years, aptamer-based LFS has found extensive application in qualitative, semi-quantitative, and quantitative detection across food safety, environmental surveillance, clinical diagnostics, and other domains. This review provided a concise overview of different aptamer screening methodologies, selection strategies, underlying principles, and procedural, elucidating their respective advantages, limitations, and applications. Additionally, we summarized recent strategies and mechanisms for aptamer-based LFS, such as the sandwich and competitive methods. Furthermore, we classified LFSs constructed based on aptamers, considering the rapid advancements in this area, and discussed their applications in biological and chemical detection. Finally, we delved into the current challenges and future directions in the development of aptamer and aptamer-based LFS. Although this review was not thoroughly, it would serve as a valuable reference for understanding the research progress of aptamer-based LFS and aid in the development of new types of aptasensors.

An electrochemical ratiometric immunosensor for the detection of NMP22 based on ZIF-8@MWCNTs@Chit@Fc@AuNPs and AuPt-MB

Nuclear matrix protein 22 (NMP22) is one of the most important tumor markers of bladder cancer and is significantly elevated in the urine of bladder cancer patients. Therefore, in this work, a highly sensitive ratiometric electrochemical immunosensor was constructed to detect NMP22 based on ZIF-8@MWCNTs@Chit@Fc@AuNPs composites. ZIF-8 had a large surface area and good adsorption ability. Multi-Walled Carbon Nanotubes (MWCNTs) can optimize the electrical conductivity of ZIF-8, so that the electrode surface of ferrocene (Fc) obtains a stable and strong electrochemical signal. In addition, AuPt-MB provided another strong detection signal methylene blue (MB) while immobilizing the secondary antibody (Ab2) through Au-N and Pt-N bonds. A ratiometric electrochemical sensor was formed based on ZIF-8@MWCNTs@Chit@Fc@AuNPs and AuPt-MB, which showed a great linear connection between IMB/IFc and the logarithmic concentration of NMP22 with a detection limit of 3.33 fg mL-1 (S/N = 3) under optimized specifications in the concentration interval of 0.01 pg mL-1 to 1000 ng mL-1. In addition, the ratiometric immunosensor showed good selectivity and stability.

Rapid detection of Salmonella in milk by labeling-free electrochemical immunosensor based on an Fe3O4-ionic liquid-modified electrode

Electrochemical sensors show distinct advantages over other types of sensors in the rapid detection of microorganisms. Here, we attempted to construct a label-free electrochemical immunosensor based on an Fe3O4-ionic liquid (IL)-modified electrode to rapidly detect Salmonella in milk. The excellent ionic conductivity of the IL facilitated sensor construction, and the large surface area of nano-Fe3O4 provided numerous sites for subsequent experiments. An antibody was fixed on the Fe3O4-IL complex with polyglutamic acid modification by a simple infusion method. The microstructure of the Fe3O4-IL composites was investigated by scanning electron microscopy, and the elements and structures of the composites were analyzed by energy dispersive X-ray and Fourier transform infrared spectroscopy. Under optimized experimental conditions, the detection range of the constructed sensor was 3.65 × 102-3.65 × 108 CFU mL-1, and the LOD was 1.12 × 102 CFU mL-1 (S/N = 3). In addition, the prepared electrochemical immunosensor is convenient for detecting foodborne pathogens because of its outstanding stability, good selectivity, and repeatability.

Application of DNA-fueled molecular machines in food safety testing

Food is consumed by humans, which is indispensable to human life. Therefore, considerable attention of the whole society has been paid to food safety. Over the last few years, dramatic social development has brought new challenges to food safety, making developing new and quick methods for on-site food safety testing an important necessity. As a result, DNA-fueled molecular machines, characterized by high efficiency, accuracy, and sensitivity in testing, have come into the spotlight, based on which sensors can be constructed to detect toxic and harmful substances in food products. This study reviewed recent research on several DNA-fueled molecular machines, including DNA tweezers, DNA walkers, and DNA origami, for rapidly detecting toxic and harmful substances. Based on the above studies, the sensitivity and timeliness of several DNA molecular machines were summarized and compared, and the development prospect of DNA fuel molecular machines in the field of food safety detection was prospected.

Advances in paper-based electrochemical immunosensors: review of fabrication strategies and biomedical applications

Cellulose paper-based sensing devices have shown promise in addressing the accuracy, sensitivity, selectivity, analysis time and cost of current disease diagnostic tools owing to their excellent physical and physiochemical properties, high surface-area-to-volume ratio, strong adsorption capabilities, ease of chemical functionalization for immobilization, biodegradability, biocompatibility and liquid transport by simple capillary action. This review provides a comprehensive overview of recent advancements in the field of electrochemical immunosensing for various diseases, particularly in underdeveloped regions and globally. It highlights the significant progress in fabrication techniques, fluid control, signal transduction and paper substrates, shedding light on their respective advantages and disadvantages. The primary objective of this review article is to compile recent advances in the field of electrochemical immunosensing for the early detection of diseases prevalent in underdeveloped regions and globally, including cancer biomarkers, bacteria, proteins and viruses. Herein, the critical need for new, simplistic early detection strategies to combat future disease outbreaks and prevent global pandemics is addressed. Moreover, recent advancements in fabrication techniques, including lithography, printing and electrodeposition as well as device orientation, substrate type and electrode modification, have highlighted their potential for enhancing sensitivity and accuracy.

Highly Sensitive Photothermal Microfluidic Thread-Based Duplex Immunosensor for Point-of-Care Monitoring

Herein, we successfully developed a thread-based analytical device (μTAD) for simultaneous immunosensing of two biomolecules with attomolar sensitivity by using a photothermal effect. A photothermal effect exploits a strong light-to-heat energy conversion of plasmonic metallic nanoparticles at localized surface plasmon resonance. The key innovation is to utilize the cotton thread to realize this sensor and the use of chitosan modification for enhancing the microfluidic properties, for improving the efficiency of photothermal conversion, and for sensor stability. The developed μTAD sensor consists of (i) a sample zone, (ii) a conjugation zone coated with gold nanoparticles bound with an antibody (AuNPs-Ab2), and (iii) a test zone immobilized with a capture antibody (anti-Ab1). The prepared μTAD is assembled in a custom three-dimensional (3D) printed device which holds the laser for illumination and the thermometer for readout. The 3D-printed supportive device enhances signal response by focusing light and localizing the heat generated. For proof of concept, simultaneous sensing of two key stress and inflammation biomarkers, namely, cortisol and interleukin-6 (IL-6), are monitored using this technique. Under optimization, this device exhibited a detection linear range of 2.0-14.0 ag/mL (R2 = 0.9988) and 30.0-360.0 fg/mL (R2 = 0.9942) with a detection limit (LOD) of 1.40 ag/mL (∼3.86 amol/L) and 20.0 fg/mL (∼950.0 amol/L) for cortisol and IL-6, respectively. Furthermore, the analysis of both biomolecules in human samples indicated recoveries in the range of 98.8%-102.88% with the highest relative standard deviation being 3.49%, offering great accuracy and precision. These results are the highest reported sensitivity for these analytes using an immunoassay method. Our PT-μTAD strategy is therefore a promising approach for detecting biomolecules in resource-limited point-of-care settings.

Nanomaterials integrated with microfluidic paper-based analytical devices for enzyme-free glucose quantification

In this study, nanomaterials capable of enzyme-free glucose quantification and colorimetric readout are integrated into a microfluidic paper-based analytical devices (μPADs). Gold nanoparticles (AuNPs) and silver nanoparticles (AgNPs) were utilized as a peroxidase-like nanozyme and a colorimetric probe to achieve glucose monitoring. In this developed device, glucose is oxidized by AuNPs to generate hydrogen peroxide (H₂O₂), which flows in the paper microchannels toward detection zones. H₂O₂ then etches the immobilized AgNPs to induce a color change. The intensity of color change is easily monitored using a smartphone application. Following method optimization, we obtained a linear range from 0.50 to 10.0 mmol L^-1 (R² = 0.9921) and a detection limit (LOD) of 340.0 μmol L^-1. This falls in the clinically relevant range for glucose monitoring and diabetes diagnosis in humans. In addition, the total analysis time is just 20 min, which is significantly less than the same experiment performed in the solution phase. Also, our method is markedly selective; other substrates do not interfere. The recovery test in human control samples was in the range of 98.47-102.34% and the highest relative standard deviation (RSD) was 3.58%. The enzyme-free approach for glucose sensing is highly desirable for diabetes diagnosis as it replaces the more expensive enzyme with cheaper nanomaterials. Furthermore, since nanomaterials are more environmentally stable compared to enzymes, it has the potential for widespread deployment as point-of-care diagnostics (POC) in resource-limited settings.

Resistance-Based Lateral Flow Immunosensor with a NFC-Enabled Smartphone for Rapid Diagnosis of Leptospirosis in Clinical Samples

Leptospirosis is one of the most life-threatening tropical diseases caused by pathogenic Leptospira. To date, a diagnostic device that offers rapid and sensitive detection of leptospires has been still in demand for proper treatment to reduce the mortality rate. Herein, we create a resistance-based lateral flow immunosensor diagnosis device (R-LFI) that integrates near-field communication (NFC) with a portable smartphone for leptospiral detection in clinical samples. A specific monoclonal antibody against the pathogen was coated on a nitrocellulose membrane (NCM) where the test line was collocated. Two electrodes with a sandwich-like configuration were installed employing a conductive double-sided adhesive tape and connected with a NFC smartphone-based detection system. A half-sandwich immunocomplex formation induced high proton conduction, resulting in a considerable decrement in resistive response. The performance of the R-LFI sensor was evaluated using recombinant LipL32 (rLipL32), Leptospira interrogans, and clinical samples. The R-LFI device exhibited linear responses toward rLipL32 protein in phosphate buffer and L. interrogans-spiked healthy human serum samples within the concentration ranging from 1 to 1000 ng mL^-1 (limit of detection (LOD): 0.29 ng mL^-1) and from 10⁴ to 10⁶ cell mL^-1 (LOD: 4.89 × 10³ cell mL^-1), respectively. Our R-LFI sensor successfully detected L. interrogans-positive clinical samples as confirmed by polymerase chain reaction (PCR). This platform offers high specificity, selectivity, simplicity, miniscule sample volume, and no labeling element requirement. These desirable features make it particularly suitable for countries where medical facilities and resources are limited.

Automated Paper-Based Femtogram Sensing Device for Competitive Enzyme-Linked Immunosorbent Assay of Aflatoxin B1 Using Submicroliter Samples

Microfluidic paper-based analytical devices (μPADs) are promising biosensors that may be used in a variety of bioanalytical applications. A μPAD for automating the competitive enzyme-linked immunosorbent assay (ELISA) of small-sized target detection at the femtogram level using submicroliter samples is reported in this study. The proposed μPAD was integrated with a sucrose valve to automate the sequential delivery of reagents, providing simple control of reagent delivery time and simple operation. The use of a sample solution dropping location at the zones on the device that had been prepared with an antibody-conjugated enzyme before immersion in a running buffer allowed minimization of sample volume to 0.6 μL, while eliminating the possible loss of a target molecule by adsorption on the membrane, thus improving detection sensitivity. Furthermore, the proposed device was successfully applied to the automation of competitive ELISA for the detection of aflatoxin B₁ (AFB₁), a potent carcinogen that causes substantial health risks to humans worldwide, with a detection limit of 60 femtograms or 0.1 ng/mL. The method developed in this study provides high sensitivity, small sample volume, on-site and equipment-free measurements, low-cost operation, and user-friendliness. This approach could be used to analyze small-sized molecules in the fields of food safety and quality control, environmental monitoring, and clinical diagnostics.

A novel fluorescent platform of DNA-stabilized silver nanoclusters based on exonuclease III amplification-assisted detection of Salmonella Typhimurium

A novel fluorescent platform of DNA-stabilized silver nanoclusters (DNA-AgNCs) has been developed based on exonuclease III (Exo III) amplification-assisted for simple and sensitive detection of Salmonella Typhimurium (S. Typhimurium). The platform was designed by using magnetic beads, aptamer, its complementary DNA, hairpin probe (HP), Exo III, AgNO₃, and NaBH₄. The functionalized HP contained a cytosine-rich oligonucleotide loop (C-rich loop), which served as an effective template for the chemical reduction of Ag⁺ with NaBH₄ to synthesize DNA-AgNCs. In the presence of S. Typhimurium, the C-rich loop was converted into an open form of ssDNA by the recycle digestion of Exo III, leading to a corresponding decrease in fluorescence intensity. Based on the fluorescence changes of the formed DNA-AgNCs, the sensitive detection of S. Typhimurium was achieved. Under the optimal conditions, a wide linear relationship was observed in the concentration of S. Typhimurium ranging from 4.6 × 10² to 4.6 × 10⁷ cfu mL^-1 with the limit of detection (LOD) being 82 cfu mL^-1. The method showed good selectivity for detecting S. Typhimurium. In addition, the platform could be used for the detection of S. Typhimurium in milk samples. The LOD reached 6.6 × 10² cfu mL^-1 with a good linear range, indicating that the method had excellent practicability in complex food samples.

An Enhanced Lateral Flow Assay Based on Aptamer-Magnetic Separation and Multifold AuNPs for Ultrasensitive Detection of Salmonella Typhimurium in Milk

In this paper, a novel and ultrasensitive lateral flow assay (LFA) based on aptamer-magnetic separation, and multifold Au nanoparticles (AuNPs) was developed for visual detecting Salmonella enterica ser. Typhimurium (S. Typhimurium). The method realized magnetic enrichment and signal transduction via magnetic separation and achieved signal amplification through hybridizing AuNPs-capture probes and AuNPs-amplification probes to form multifold AuNPs. Two different thiolated single-strand DNA (ssDNA) on the AuNPs-capture probe played different roles. One was combined with the AuNPs-amplification probe on the conjugate pad to achieve enhanced signals. The other was connected to transduction ssDNA1 released by aptamer-magnetic capture of S. Typhimurium, and captured by the T-line, forming a positive signal. This method had an excellent linear relationship ranging from 8.6 × 102 CFU/mL to 8.6 × 107 CFU/mL with the limit of detection (LOD) as low as 8.6 × 100 CFU/mL in pure culture. In actual samples, the visual LOD was 4.1 × 102 CFU/mL, which did not carry out nucleic acid amplification and pre-enrichment, increasing three orders of magnitudes than unenhanced assays with single-dose AuNPs and no magnetic separation. Furthermore, the system showed high specificity, having no reaction with other nontarget strains. This visual signal amplificated system would be a potential platform for ultrasensitive monitoring S. Typhimurium in milk samples.

Gold Nanomaterials as a Promising Integrated Tool for Diagnosis and Treatment of Pathogenic Infections-A Review

This review summarizes research on functionalized gold nanomaterials as pathogen detection sensors and pathogen elimination integrated tools. After presenting the challenge of current severe threat from pathogenic bacteria and the increasingly serious growth rate of drug resistance, the first section mainly introduces the conspectus of gold nanostructures from synthesis, characterization, physicochemical properties and applications of gold nanomaterials. The next section deals with gold nanomaterials-based pathogen detection sensors such as colorimetric sensors, fluorescence sensors and Surface-Enhanced Raman Scattering sensors. We then discuss strategies based on gold nanomaterials for eliminating pathogenic infections, such as the dual sterilization strategy for grafting gold nanomaterials with antibacterial substances, photothermal antibacterial and photodynamic antibacterial methods. The fourth part briefly introduces the comprehensive strategy for diagnosis and sterilization of pathogen infection based on gold nanomaterials, such as the diagnosis and treatment strategy for pathogen infection using Roman signals real-time monitoring and photothermal sterilization. A concluding section that summarizes the current status and challenges of the novel diagnosis and treatment integrated strategy for pathogenic infections, gives an outlook on potential future perspectives.

Screen-Printed Electrode-Based Sensors for Food Spoilage Control: Bacteria and Biogenic Amines Detection

Food spoilage is caused by the development of microorganisms, biogenic amines, and other harmful substances, which, when consumed, can lead to different health problems. Foodborne diseases can be avoided by assessing the safety and freshness of food along the production and supply chains. The routine methods for food analysis usually involve long analysis times and complex instrumentation and are performed in centralized laboratories. In this context, sensors based on screen-printed electrodes (SPEs) have gained increasing importance because of their advantageous characteristics, such as ease of use and portability, which allow fast analysis in point-of-need scenarios. This review provides a comprehensive overview of SPE-based sensors for the evaluation of food safety and freshness, focusing on the determination of bacteria and biogenic amines. After discussing the characteristics of SPEs as transducers, the main bacteria, and biogenic amines responsible for important and common foodborne diseases are described. Then, SPE-based sensors for the analysis of these bacteria and biogenic amines in food samples are discussed, comparing several parameters, such as limit of detection, analysis time, and sample type.