Paper-based analytical devices for colorimetric detection of S. aureus and E. coli and their antibiotic resistant strains in milk

β-Galactosidase-triggered in situ synthesis of yellow emitting silicon nanoparticle and its application in visual detection of E. coli O157:H7 and drug susceptibility test

The sensitive detection of foodborne pathogenic and rapid antibiotic susceptibility testing (AST) is of great significance. This paper reports the enzyme-triggered in situ synthesis of yellow emitting silicon nanoparticles (SiNPs) and the detection of Escherichia coli (E. coli) O157:H7 in food samples and the rapid AST. The rapid counting of E. coli O157:H7 has been achieved through direct visual observation, equipment detection, and smartphone digitalization. A simple detection platform based on smartphone senses and cotton swabs has been established. Meanwhile, rapid AST based on enzyme-catalyzed SiNPs can intuitively obtain colorimetric samples. This paper established a system for bacterial enzyme-triggered in situ synthesis of SiNPs, with high responsiveness, luminescence ratio, and specificity. The detection limit for E. coli O157:H7 can reach 100 CFU/mL during 5 h, and the recovery efficiency ranges from 90.14% to 110.16%, which makes it a promising strategy for the rapid detection of E. coli O157:H7 and AST.

Paper-based sensors: affordable, versatile, and emerging analyte detection platforms

Paper-based sensors, often referred to as paper-based analytical devices (PADs), stand as a transformative technology in the field of analytical chemistry. They offer an affordable, versatile, and accessible solution for diverse analyte detection. These sensors harness the unique properties of paper substrates to provide a cost-effective and adaptable platform for rapid analyte detection, spanning chemical species, biomolecules, and pathogens. This review highlights the key attributes that make paper-based sensors an attractive choice for analyte detection. PADs demonstrate their versatility by accommodating a wide range of analytes, from ions and gases to proteins, nucleic acids, and more, with customizable designs for specific applications. Their user-friendly operation and minimal infrastructure requirements suit point-of-care diagnostics, environmental monitoring, food safety, and more. This review also explores various fabrication methods such as inkjet printing, wax printing, screen printing, dip coating, and photolithography. Incorporating nanomaterials and biorecognition elements promises even more sophisticated and sensitive applications.

A simple and sensitive colorimetric approach for mecA gene analysis via exonuclease-III catalyzed signal cascade

Analysis of mecA gene in Staphylococcus aureus (S. aureus) is essential for controlling infections in intensive care units (ICU) and preventing the use of ineffectual empirical treatments. However, quantitative determination of the mecA gene remains difficult. Herein, we propose a simple and sensitive colorimetric approach by integrating exonuclease-III (Exo-III) assisted signal cascade and G-quadruplex/hemin DNAzymes (G4 DNAzymes) catalyzed 2,2'-azino-bis (3-ethylben-zothiazoline-6-sulfonic acid) (ABTS) based color reaction. In this method, signal amplification does not necessitate the use of complex experimental components, such as multiple enzymes and primer design, while still maintaining a high signal amplifying efficiency. Therefore, the method has a broad mecA gene detection range from 10 fM to 1 nM and a low limit of detection down to 3.4 fM level. Taking the merit of simplicity and high sensitivity, the approach is promising in analyzing mecA gene in S. aureus and diagnosing infections.

Selective optical sensing of iron(III) ions in an aqueous medium by benzochromone-based Schiff base and its application on test strips

In this work, we designed and synthesized a novel, simple, low-cost, and effective chromone-based Schiff base ligand (HL) and its application as a chemosensor for Fe3+ detection. The structure of the synthesized sensor bears carboxylic, azomethine, and carbonyl groups which act as chelating sites for the detection of Fe3+ ions. The chemosensor HL exhibited highly selective detection of Fe3+ via a significant colour change from yellow to brown. The colour change is due to the ligand-to-metal charge-transfer (LMCT) mechanism. The sensor (HL) was characterized using UV-Vis, FTIR, NMR (1H- and 13C), and mass spectroscopy. The ligand solubility, detection condition, and sensitivity assessment suggested optimal use of DMF-water (9:1 v/v) as a working solvent at pH 7.0. Among a list of 15 metal ions screened, HL was highly selective, with instant response, towards Fe3+ ions without significant interferences with the other metal ions. The complexation ratio and association constants of HL to Fe3+ was determined by Job's plot and Benesi-Hildebrand methods, and were 2:1 and 2.24 × 103 M-1, respectively, with a detection limit of 2.86 μM. The HL probe was also applied to detect Fe3+ in real samples with acceptable performance. The simple test strips have been successfully developed and applied to the visual monitoring of Fe3+ ions with a detection limit of 68 µM. The DFT was used to examine the best interaction mode of HL with Fe metal to be Fe(III)-L or Fe(III)-2L. The chemical-reactivity and molecular electrostatic optional were figured to predict the interaction behaviour of the tested compounds.

Dilution Reduces Sample Matrix Effects for Rapid, Direct, and Miniaturised Phenotypic Antibiotic Susceptibility Tests for Bovine Mastitis

The time-consuming nature of current methods for detecting antimicrobial resistance (AMR) to guide mastitis treatment and for surveillance, drives innovation towards faster, easier, and more portable technology. Rapid on-farm testing could guide antibiotic selection, reducing misuse that contributes to resistance. We identify challenges that arise when developing miniaturized antibiotic susceptibility tests (AST) for rapid on-farm use directly in milk. We experimentally studied three factors: sample matrix (specifically milk or spoiled milk); the commensal bacteria found in fresh bovine milk; and result time on the performance of miniaturised AST. Microfluidic "dip-and-test" devices made from microcapillary film (MCF) were able to monitor Gram-negative bacterial growth colourimetrically even in the presence of milk and yoghurt (used to simulate spoiled milk samples), as long as this sample matrix was diluted 1:5 or more in growth medium. Growth detection kinetics using resazurin was not changed by milk at final concentrations of 20% or lower, but a significant delay was seen with yoghurt above 10%. The minimum inhibitory concentration (MIC) for ciprofloxacin and gentamicin was increased in the presence of higher concentrations of milk and yoghurt. When diluted to 1% all observed MIC were within range, indicating dilution may be sufficient to avoid milk matrix interfering with microfluidic AST. We found a median commensal cell count of 6 × 105 CFU/mL across 40 healthy milk samples and tested if these bacteria could alter microfluidic AST. We found that false susceptibility may be observed at early endpoint times if testing some pathogen and commensal mixtures. However, such errors are only expected to occur when a susceptible commensal organism is present at higher cell density relative to the resistant pathogen, and this can be avoided by reading at later endpoints, leading to a trade-off between accuracy and time-to-result. We conclude that with further optimisation, and additional studies of Gram-positive organisms, it should be possible to obtain rapid results for microfluidic AST, but a trade-off is needed between time-to-result, sample dilution, and accuracy.

Polymeric and Paper-Based Lab-on-a-Chip Devices in Food Safety: A Review

Food quality and safety are important to protect consumers from foodborne illnesses. Currently, laboratory scale analysis, which takes several days to complete, is the main way to ensure the absence of pathogenic microorganisms in a wide range of food products. However, new methods such as PCR, ELISA, or even accelerated plate culture tests have been proposed for the rapid detection of pathogens. Lab-on-chip (LOC) devices and microfluidics are miniaturized devices that can enable faster, easier, and at the point of interest analysis. Nowadays, methods such as PCR are often coupled with microfluidics, providing new LOC devices that can replace or complement the standard methods by offering highly sensitive, fast, and on-site analysis. This review's objective is to present an overview of recent advances in LOCs used for the identification of the most prevalent foodborne and waterborne pathogens that put consumer health at risk. In particular, the paper is organized as follows: first, we discuss the main fabrication methods of microfluidics as well as the most popular materials used, and then we present recent literature examples for LOCs used for the detection of pathogenic bacteria found in water and other food samples. In the final section, we summarize our findings and also provide our point of view on the challenges and opportunities in the field.

Paper based microfluidic devices: a review of fabrication techniques and applications

A wide range of applications are possible with paper-based analytical devices, which are low priced, easy to fabricate and operate, and require no specialized equipment. Paper-based microfluidics offers the design of miniaturized POC devices to be applied in the health, environment, food, and energy sector employing the ASSURED (Affordable, Sensitive, Specific, User-friendly, Rapid and Robust, Equipment free and Deliverable to end users) principle of WHO. Therefore, this field is growing very rapidly and ample research is being done. This review focuses on fabrication and detection techniques reported to date. Additionally, this review emphasises on the application of this technology in the area of medical diagnosis, energy generation, environmental monitoring, and food quality control. This review also presents the theoretical analysis of fluid flow in porous media for the efficient handling and control of fluids. The limitations of PAD have also been discussed with an emphasis to concern on the transformation of such devices from laboratory to the consumer.

Recent developments in microfluidic paper-based analytical devices for pharmaceutical analysis

In the last decade, due to the global increase in diseases, drugs for biomedical applications have increased dramatically. Therefore, there is an urgent need for analytical tools to monitor, treat, investigate, and control drug compounds in diverse matrices. The new and challenging task has been looking for simple, low-cost, rapid, and portable analytical platforms. The development of microfluidic paper-based analytical devices (µPADs) has garnered immense attention in many analytical applications due to the benefit of cellulose structure. It can be functionalized and serves as an ideal channel and scaffold for the transportation and immobilization of various substances. Microfluidic technology has been considered an effective tool in pharmaceutical analysis that facilitates the quantitative measurement of several parameters on cells or other biological systems. The µPADs represent unique advantages over conventional microfluidics, such as the self-pumping capability. They have low material costs, are easy to fabricate, and do not require external power sources. This review gives an overview of the current designs in this decade for µPADs and their respective application in pharmaceutical analysis. These include device designs, choice of paper material, and fabrication techniques with their advantages and drawbacks. In addition, the strategies for improving analytical performance in terms of simplicity, high sensitivity, and selectivity are highlighted, followed by the application of µPADs design for the detection of drug compounds for various purposes. Moreover, we present recent advances involving µPAD technologies in the field of pharmaceutical applications. Finally, we discussed the challenges and potential of µPADs for the transition from laboratory to commercialization.

A review on urinary tract infections diagnostic methods: Laboratory-based and point-of-care approaches

Urinary tract infections (UTIs) are among the most common infectious diseases worldwide. This type of infections can be healthcare-associated or community-acquired and affects millions of people every year. Different diagnostic procedures are available to detect pathogens in urine and they can be divided into two main categories: laboratory-based and point-of-care (POC) detection techniques. Traditional methodologies are often time-consuming, thus, achieving a rapid and accurate identification of pathogens is a challenging feature that has been pursued by many research groups and companies operating in this area. The purpose of this review is to compare and highlight advantages and disadvantages of the traditional and currently most used detection methods, as well as the emerging POC approaches and the relevant advances in on-site detection of pathogens´ mechanisms, suitable to be adapted to UTI diagnosis. Lately, the commercially available UTI self-testing kits and devices are helping in the diagnosis of urinary infections as patients or care givers are able to perform the test, easily and comfortably at home and, upon the result, decide when to attend an appointment/Urgent Health Care Unit.

Comparison of paper-based nucleic acid extraction materials for point-of-care testing applications

Cheap, rapid, simple and equipment-free nucleic acid extraction (NAE) is highly preferred for implementing nucleic acid detection at point-of-care (POC). Paper-based NAE materials have been extensively utilized due to their low cost, abundance, portability, biocompatibility and ease of chemical modification. However, it is challenging for users to choose the proper one from existing paper-based NAE materials for specific POC applications, which is determined by their physical and chemical properties. Additionally, building the relationship between the physical and chemical properties and the NAE efficiency of paper-based materials is instructive for development of new paper-based NAE materials. In this study, we first systematically compared the physical and chemical properties of six widely used paper-based NAE materials (namely Whatman filter paper #1, FTA card, FTA elute card, Fusion 5, silica membrane and polyethersulfone (PES) membrane), and then evaluated their NAE efficiency. The obtained results indicated that pore uniformity, wet strength, porosity and functional groups are key parameters to affect the efficiency of NAE. The NAE performance of FTA card is the best with high concentration and purity. Finally, we envision that more cost-effective paper-based NAE materials will be developed for POCT application in the future.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10570-022-04444-6.

Progressing Antimicrobial Resistance Sensing Technologies across Human, Animal, and Environmental Health Domains

The spread of antimicrobial resistance (AMR) is a rapidly growing threat to humankind on both regional and global scales. As countries worldwide prepare to embrace a One Health approach to AMR management, which is one that recognizes the interconnectivity between human, animal, and environmental health, increasing attention is being paid to identifying and monitoring key contributing factors and critical control points. Presently, AMR sensing technologies have significantly progressed phenotypic antimicrobial susceptibility testing (AST) and genotypic antimicrobial resistance gene (ARG) detection in human healthcare. For effective AMR management, an evolution of innovative sensing technologies is needed for tackling the unique challenges of interconnected AMR across various and different health domains. This review comprehensively discusses the modern state-of-play for innovative commercial and emerging AMR sensing technologies, including sequencing, microfluidic, and miniaturized point-of-need platforms. With a unique view toward the future of One Health, we also provide our perspectives and outlook on the constantly changing landscape of AMR sensing technologies beyond the human health domain.

Enhanced electrochemiluminescence bioassay triggered by intracellular leakage for detection of Escherichia coli

An intracellular leakage-trigged signal-on solid-state electrochemiluminescent (ECL) assay is developed for the detection of Escherichia coli (E. coli). A self-assembled multilayer ensemble of N, S co-doped carbon dots -poly dimethyl diallylammonium chloride grafted carbon nanospheres is used as ECL luminophores with peroxydisulfate (PS) ions as coreactants. The incorporation of molecularly imprinted electrospun nanofibers with the multilayer ensemble enables a robust, highly selective solid-state ECL probe without using any expensive and fragile biological receptor. Upon the imprinted E. coli exposed to the assay, under bactericidal effects of PS ions by destroying the integrity of E. coli cell membrane, intracellular leakage K⁺-triggered ECL enhancement is first disclosed via prompting the involved ¹O₂-mediated ECL process. Benefiting from the ECL enhancement upon increasing the concentration of E. coli, a unique intracellular leakage-trigged signal-on ECL system is created for sensing E. coli. Such a assay is proved to be highly specific and sensitive for sensing E. coli in the concentration range from 5 to 10⁷ cfu mL^-1, achieving a detection limit of 1 cfu mL^-1 (S/N = 3). This label-free, simple and facile assay provides a promising point-of-care diagnostic tool for pathogen detection.

Sensory materials for microfluidic paper based analytical devices - A review

The microfluidic paper-based analytical devices (μPADs) have grown-up swiftly over the decade due to its low cost, simple fabrication procedure, resource-limitedness, non-toxicity and their environmentally benign nature. The μPADs, also identified as point-of-care devices or health care devices have successfully applied in several fields such as diagnostics, biological, food safety, environmental, electrochemical and most importantly colorimetric/fluorimetric sensors, owing to the attractive passive motions of analyte without any external forces. In recent years, a large number of colorimetric and fluorimetric probes have been reported that can selectively recognize the analytes in μPADs. However, there is no organized review on its structure-activity relationship. In this review, we have focused to summarize the colorimetric and fluorimetric probes utilized in μPADs. This review discuss about the relationships between the structure and functions of various probes as signaling units of the efficient μPADs. The probes including nanomaterials, nanozymes, polymers and organic molecules, their structural activity with regard to sensing performances along with their limit of detection are also discussed. This review is expected to assist readers for better understanding of the sensing mechanisms of various chemo and bio-probes utilized in μPADs, as well as promote their advancement in the field. On the other hand, this review also helps the researchers for enhancement of μPADs and paves way for synergistic application of existing molecular probes as an effective diagnostic tool for the worldwide pandemic novel corona virus COVID-19.

Naked-eye sensing and target-guiding treatment of bacterial infection using pH-tunable multicolor luminescent lanthanide-based hydrogel

In this work, a pH-tunable multicolor luminescent lanthanide-based hydrogel (CS/DEX/CP) was prepared based on lanthanide coordination polymer (CP), dextran aldehyde (DEX) and chitosan (CS). The CP was obtained by the self-assembly of guanosine acid (GMP), ciprofloxacin (CIP), Eu³⁺, and Tb³⁺. As-prepared CS/DEX/CP hydrogel could emit blue, green, and red luminescence of CIP, Tb³⁺, and Eu³⁺, respectively. It was also found that the luminescence of CS/DEX/CP hydrogel exhibited visual color change in the pH range of 5.5 to 8. Such pH-sensitive hydrogel was multicolor-responsive to protons produced by bacterial growth, therefore, it could provide early warning of bacterial infection by naked-eye. In addition, the increased acidity resulted in not only the degradation of acid-labile Schiff base linkages between DEX and CS, but also the fracture of coordination between CIP and lanthanide ions. As a result, the released CIP and CS showed significantly antibacterial activity against both S. aureus and E. coli.

Simultaneous analysis of multiple adulterants in milk using microfluidic paper-based analytical devices

This study reports the simultaneous colorimetric detection of urea, H₂O₂, and pH in milk samples using microfluidic paper-based analytical devices (μPADs) fabricated through a craft cutter printer. Paper-based devices were designed to contain three detection zones interconnected to a sampling zone by microfluidic channels. Colorimetric analysis was performed using images digitalized through an office scanner. The volumes of chromogenic and sample solutions were optimized, and the best colorimetric performance was achieved by adding 0.5 and 10 μL into detection and sampling zones, respectively. Simultaneous assays were then carried out, and the recorded responses revealed a linear behavior in the concentration ranges from 0-30.0 mmol L^-1, 0-10.0 mmol L^-1 and 6.0-9.0 for urea, H₂O₂ and pH, respectively. The limit of detection values obtained for urea and H₂O₂ were 2.4 mmol L^-1 and 0.1 mmol L^-1, respectively. For pH measurements, colorimetric assay allowed the monitoring of solution pH with a resolution of 0.25 units. The use of μPADs to detect target adulterants exhibited suitable reproducibility (RSD ≤ 6.0%), accuracy (91-102%) and no cross-reaction occurrence. When compared to reference techniques, colorimetric assays did not reveal a significant difference at a confidence level of 95%. As a proof-of-concept, the feasibility of the proposed approach was successfully demonstrated through the analysis of potential adulterants in sixteen milk samples, which were tested without any pretreatment requirement. Based on the achievements, μPADs in conjunction with colorimetric measurements emerge as a powerful tool for rapid screening of potential adulterants in milk.

Microfluidic Colorimetric Biosensors Based on MnO2 Nanozymes and Convergence-Divergence Spiral Micromixers for Rapid and Sensitive Detection of Salmonella

In-field screening of foodborne pathogens plays an important role in ensuring food safety. Thus, a microfluidic biosensor was developed for rapid and sensitive detection of Salmonella using manganese dioxide nanoflowers (MnO₂ NFs) for amplifying the biological signal, a microfluidic chip with a convergence-divergence spiral micromixer for performing automatic operations, and a smartphone app with a saturation calculation algorithm for processing the image. First, immune magnetic nanoparticles (MNPs), the sample, and immune MnO₂ NFs were fully mixed and sufficiently incubated in the spiral micromixer to form MNP-bacteria-MnO₂ sandwich complexes, which were magnetically captured in a separation chamber in the microfluidic chip. Then, a 3,3',5,5'-tetramethylbenzidine (TMB) substrate was injected and catalyzed by a MnO₂ NF nanomimetic enzyme on the complexes, resulting in the production of yellow catalysate. Finally, the catalysate was transferred into a detection chamber and its image was measured and processed using the smartphone app to determine the number of bacteria. This biosensor was able to detect Salmonella from 4.4 × 10¹ to 4.4 × 10⁶ CFU/mL in 45 min with a detection limit of 44 CFU/mL, and has the potential to provide a promising platform for on-site detection of foodborne bacteria.

Recent Advances in Microfluidic Devices for Contamination Detection and Quality Inspection of Milk

Milk is a necessity for human life. However, it is susceptible to contamination and adulteration. Microfluidic analysis devices have attracted significant attention for the high-throughput quality inspection and contaminant analysis of milk samples in recent years. This review describes the major proposals presented in the literature for the pretreatment, contaminant detection, and quality inspection of milk samples using microfluidic lab-on-a-chip and lab-on-paper platforms in the past five years. The review focuses on the sample separation, sample extraction, and sample preconcentration/amplification steps of the pretreatment process and the determination of aflatoxins, antibiotics, drugs, melamine, and foodborne pathogens in the detection process. Recent proposals for the general quality inspection of milk samples, including the viscosity and presence of adulteration, are also discussed. The review concludes with a brief perspective on the challenges facing the future development of microfluidic devices for the analysis of milk samples in the coming years.