Tip and heterogeneous effects co-contribute to a boosted performance and stability in zinc air battery

The zinc-air battery (ZAB) performance and stability strongly depend on the structure of bifunctional electrocatalyst for oxygen reduction/evolution reaction (ORR/OER). In this work, we combine the tip and heterogeneous effects to construct cobalt/cobalt oxide heterostructure nanoarrays (Co/CoO-NAs). Due to the formed heterostructure, more oxygen vacancies are found for Co/CoO-NAs resulting in a 1.4-fold higher ORR intrinsic activity than commercial carbon supported platinum electrocatalyst (Pt/C) at 0.8 V versus reversible hydrogen electrode (vs. RHE). Moreover, a fast surface reconstruction is observed for Co/CoO-NAs during OER catalysis evidenced by in-situ electrochemical impedance spectroscopy and Raman tests. In addition, the tip effect efficiently lowers the mass transfer resistance triggering a low overpotential of 347 mV at 200 mA cm-2 for Co/CoO-NAs. The strong electronic interplay between cobalt (Co) and cobalt oxide (CoO) contributes to a stable battery performance during 1200 h galvanostatic charge-discharge test at 5 mA cm-2. This work offers a new avenue to construct high-performance and stable oxygen electrocatalyst for rechargeable ZAB.

Construction of amorphous/crystalline Fe doped CoSe for effective electrocatalytic oxygen evolution

Herein, amorphous/crystalline Fe-doped CoSe was synthesized (Fe-CoSe/NF), and it exhibited high oxygen evolution reaction (OER) performance. The synergistic effect of the Fe dopant and the amorphous/crystalline structure is conducive to the formation of high valence Co3+ and Fe3+ active sites. Fe-CoSe/NF shows low overpotentials of 269 mV@50 mA cm-2 and 280 mV@100 mA cm-2.

Supporting Trimetallic Metal-Organic Frameworks on S/N-Doped Carbon Macroporous Fibers for Highly Efficient Electrocatalytic Oxygen Evolution

Hybrid materials, integrating the merits of individual components, are ideal structures for efficient oxygen evolution reaction (OER). However, the rational construction of hybrid structures with decent physical/electrochemical properties is yet challenging. Herein, a promising OER electrocatalyst composed of trimetallic metal-organic frameworks supported over S/N-doped carbon macroporous fibers (S/N-CMF@Fe_x Co_y Ni_1-x-y -MOF) via a cation-exchange strategy is delicately fabricated. Benefiting from the trimetallic composition with improved intrinsic activity, hollow S/N-CMF matrix facilitating exposure of active sites, as well as their robust integration, the resultant S/N-CMF@Fe_x Co_y Ni_1-x-y -MOF electrocatalyst delivers outstanding activity and stability for alkaline OER. Specifically, it needs an overpotential of 296 mV to reach the benchmark current density of 10 mA cm^-2 with a small Tafel slope of 53.5 mV dec^-1 . In combination with X-ray absorption fine structure spectroscopy and density functional theory calculations, the post-formed Fe/Co-doped γ-NiOOH during the OER operation is revealed to account for the high OER performance of S/N-CMF@Fe_x Co_y Ni_1-x-y -MOF.

Volcano relationships and a new activity descriptor of 2D transition metal-Fe layered double hydroxides for efficient oxygen evolution reaction

Iron (Fe) sites play a critical role in boosting the catalytic activity of transition metal layered double hydroxide (LDH) electrocatalysts for the oxygen evolution reaction (OER), but the contribution of the Fe content to the catalysis of Fe-doped LDHs is still not well understood. Herein, a series of two-dimensional (2D) Fe-doped MFe-LDHs (M = Co, Ni, Cu, and Mn) was synthesized via a general molecular self-assembly method to track the role of Fe in their electrocatalytic OER activities. Besides the revelation of the intrinsic activity trend of NiFe > CoFe > MnFe > CuFe, volcano-shaped relationships among the catalytic activity descriptors, i.e., overpotential, Tafel slope, and turnover frequency (TOF), and the Fe-content in MFe-LDHs, were identified. Specifically, a ∼20% Fe content resulted in the highest OER performance for the LDH, while excess Fe compromised its activity. A similar volcano relationship was determined between the intermediate adsorption and Fe content via operando impedance spectroscopy (EIS) measurements, and it was shown that the intermediate adsorption capacitance (CPE_ad) can be a new activity descriptor for electrocatalysts. In this work, we not only performed a systematic study on the role of Fe in 2D Fe-doped LDHs but also offer some new insights into the activity descriptors for electrocatalysts.

Facile Synthesis of CoOOH Nanorings over Reduced Graphene Oxide and Their Application in the Reduction of p-Nitrophenol

A facile and one-step route has been employed for the synthesis of highly uniform CoOOH nanorings assembled on the surface of reduced graphene oxide (CoOOH/rGO nanocomposite). The physicochemical properties of the obtained CoOOH/rGO nanocomposite were characterized using X-ray diffraction pattern (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), N₂ physical adsorption (BET) and X-ray photoelectron spectroscopy (XPS). The TEM and SEM results confirmed that CoOOH nanorings (edge length ∼ 95 nm) were uniformly decorated on reduced graphene oxide nanosheets using the simple precipitation-oxidation-reduction method. When used as a catalyst for the reduction of p-nitrophenol to p-aminophenol in the presence of excess NaBH₄, the resulting CoOOH/rGO nanocomposite exhibited good activity and stability. When the initial concentration of p-nitrophenol was 1.25 × 10^-4 mol·L^-1, p-nitrophenol could be fully reduced within 3.25 min at room temperature. The apparent rate constant was estimated to be 1.77 min^-1, which is higher than that of pure CoOOH nanorings. Moreover, p-nitrophenol could still be completely reduced within 6 min in the fifth successive cycle. The superior catalytic performance of the nanocomposite is attributed to the synergistic effect between the highly dispersed CoOOH nanorings and the unique surface properties of the reduced graphene oxide nanosheets, which greatly increased the concentration of p-nitrophenol near CoOOH nanorings on reduced graphene oxide surface and improved the local electron density at the interface.

Modulation of inner filter effect between persistent luminescent particles and 2, 3-diaminophenazine for ratiometric fluorescent assay of ascorbic acid and ascorbate oxidase activity

Ascorbate oxidase (AAO) and ascorbic acid (AA) play an important role in delaying lives senescence and metabolism. In this study, a sensitive ratiometric fluorescence sensing system based on the inner filter effect (IFE) between persistent luminescent particles (PLPs) and 2, 3-diaminophenazine (DAP), was designed for the detection of AA and AAO activity. Wherein, PLPs emit blue fluorescence at 475 nm with an excitation wavelength of 370 nm. CoOOH nanosheets with oxidase-like activity can oxidize o-phenylenediamine (OPD) to produce 2, 3-diaminophenazine (DAP) with orange fluorescence at 558 nm. The generated DAP quenched the fluorescence of PLPs by an inner filter effect (IFE). When AA was introduced to the system, CoOOH nanosheets were destroyed and reduced to Co²⁺, thereby inhibiting the oxidization of OPD and effectively preserving the blue fluorescence of PLPs at 475 nm. Besides, AAO can catalyse AA to produce the oxided dehydroascorbic acid (DHA). The dissipative AA can recover orange fluorescence of DAP with weakening the blue fluorescence of PLPs. Therefore, a sensitive ratio fluorescence sensing strategy was established by using PLPs as the reference signal and DAP as a reported signal for the detection of AA and AAO activity. Under optimal conditions, the obtained linear ranges were 1-45 μM and 1-20 mU/mL, and detection limits were 0.2 μM and 0.25 mU/mL, respectively. Finally, this proposed ratiometric fluorescent analytical strategy was used to detect AA in real samples (lemon, orange, tomato), which exhibited satisfactory results comparing with commercial kit.

An inner filter effect-based nitrogen-doped carbon dots-CoOOH nanoflakes fluorescence probe for detection of ascorbic acid by chemical redox modulation

BACKGROUND

Ascorbic acid (AA) is an essential nutrient for humans, which must be obtained from vegetables, fruits, and other foods. The content of AA has become an important standard to evaluate the quality and nutritional value of food. The fluorescence sensing method based on nanomaterials is a good alternative for the rapid detection of AA. In this study, we developed an inner filter effect-based fluorescent probe that hybridized nitrogen-doped carbon dots (NCDs) with cobalt oxyhydroxide nanoflakes (CoOOH NFs).

RESULTS

An optimal NCDs was successfully selected because it has a strong fluorescence at 430 nm and the most significant quenching phenomenon with CoOOH NFs due to the inner filter effect. When adding AA into the NCDs-CoOOH NFs probe solution, a specific redox reaction will occur between the enediol group of AA and the CoOOH NFs to interfere with the quenching ability of CoOOH NFs and recover the fluorescence of NCDs. The recovered fluorescence intensities demonstrated a linear relationship with the concentrations of AA. The assay based on the NCDs-CoOOH NFs probe allows AA to be tested in a wide range of 5-200 μmol L^-1 with a detection limit of 2.31 nmol L^-1 . Furthermore, to evaluate its practical application, the NCDs-CoOOH NFs fluorescence probe was utilized to analyze AA in vegetable, fruit, and serum matrixes with satisfactory results.

CONCLUSION

An inner filter effect-based fluorescence probe for the rapid detection of AA was developed, and it has a good potential to be applied in both food and clinical testing. © 2022 Society of Chemical Industry.

Hydrothermal Synthesis and Formation Mechanism of Self-Assembled Strings of CoOOH Nanodiscs

The formation and self-assembly mechanisms of nanomaterials are of great significance for the preparation and application of materials. In this study, the orientationally aggregated CoOOH nanosheets and the self-assembled strings of CoOOH nanodiscs were prepared by hydrothermal method. The formation and self-assembly mechanisms of CoOOH nanodiscs were investigated by XRD, XPS, DLS, TEM, and SEM techniques, as well as DFT calculations. The results show that the formation process of the stacked CoOOH nanodiscs was driven by surface energy and can be divided into four steps: nucleation and growth of CoOOH primary nanosheets; oriented attachment of CoOOH nanosheets; self-assembly of CoOOH nanodiscs; and aggregation of strings of CoOOH nanodiscs. This study contributes meaningfully to the controllable preparation of CoOOH nanomaterials.

Role of External Stimuli in Engineering Magnetic Phases and Real-Time Spin Dynamics of Co/Mn Oxides

Magnetism in atomically thin two-dimensional (2D) materials can be easily manipulated by alloying, functionalization, external ultrafast laser pulse, strain, electric field, etc. In this work, we have performed a series of spin-resolved density functional theory calculations on 2D magnetic hexagonal transition-metal oxide alloys, CoMnO4. We have explored different alloy patterns and found the most stable magnetic phases in each pattern, resulting in a stable ferromagnetic (FM) ground state depending upon the pattern. We have used Janus functionalization in these materials to tune the magnetic nature of the system from FM to antiferromagnetic (AFM) states. To further control the spin dynamics, we have applied an ultrafast laser pulse to the Janus systems to explore an AFM-to-FM transition process. Finally, applying strain and electric field to the Janus alloys allows us to tune the structure-property relationship in the 2D layers to obtain desirable spin arrangements.

Ru/Rh Cation Doping and Oxygen-Vacancy Engineering of FeOOH Nanoarrays@Ti3 C2 Tx MXene Heterojunction for Highly Efficient and Stable Electrocatalytic Oxygen Evolution

Oxyhydroxides hold promise as highly-efficient non-noble electrocatalysts for the oxygen evolution reaction (OER), but their poor conductivity and structural instability greatly impede their progress. Herein, the authors develop a cation-doping and oxygenvacancy engineering strategy to fabricate Ru/Rh-doped FeOOH nanoarrays with abundant oxygen-vacancies in situ grown on Ti₃ C₂ T_x MXene (Ru/Rh-FeOOH@Ti₃ C₂ T_x ) as highly-efficient OER electrocatalysts. Benefiting from Ru/Rh-cation regulation, oxygenvacancy engineering, and heterojunction synergy between MXene and modulated FeOOH, the optimized Rh/Ru-FeOOH@Ti₃ C₂ T_x electrocatalysts exhibit excellent OER activities and remarkable stabilities with 100 h. Particularly, 3%Rh-FeOOH@Ti₃ C₂ T_x electrocatalyst only needs a 223 mV overpotential at 10 mA cm^-2 and 306 mV to reach 100 mA cm^-2 , which is superior to commercial IrO₂ catalyst and most reported oxyhydroxide-based electrocatalysts. Further, systematically theoretical caculation, kinetics, thermodynamics, and microstructural analysis verify that the integration of Ru/Rh-cation doping and oxygen vacancy obviously enhances the intrinsic conductivity and lattice defects of FeOOH and expose more active sites, thereby decreasing the adsorption/desorption energy barrier and activation energy, and improving the specific activity and catalytic kinetics of electrocatalysts, whereas in situ hybridization with MXene strengthens the structural stability. This work clearly confirms that cationdoping and oxygen-vacancy engineering offers a joint strategy for the electronic structure modulation and design of highly-efficient inexpensive OER electrocatalysts.

A universal synthesis of MOF-Hydroxyl for highly active oxygen evolution

Since of their adjustable pore structure and variety of metal sites, MOFs materials have infinite possibilities, but their low intrinsic activity hinders them from being employed in electrolytic water. The sulfurization and oxidation of MOFs has proven to be a feasible technique for producing highly active catalytic materials. Here, the MOFs are completely converted to hydroxide by treatment with alkaline solutions only. Electron microscopy demonstrates that hydroxides generated from various MOFs retain the complete profile of the precursor and contain a two-dimensional lamellar or mesoporous structure. Fe-MIL-88(A)-OH, a two-dimensional structural transformation product generated from Fe-MIL-88(A), demonstrates significant OER performance increase. At the same 300 mV overpotential, Fe-MIL-88(A)-OH delivers 83 times the current density of Fe-MIL-88(A) and 16 times that of commercial IrO₂ (22.56 mA cm^-2 vs. 0.27 mA cm^-2 vs. 1.37 mA cm^-2). The alkali treatment strategy proved to be a generally applicable treatment for MOFs, allowing the conversion of nickel- and cobalt-based MOFs to hydroxide with a significant boost in OER performance.

Engineering Sulfur Vacancies in Spinel-Phase Co3S4 for Effective Electrocatalysis of the Oxygen Evolution Reaction

Restricted by the sluggish kinetics of the oxygen evolution reaction (OER), efficient OER catalysis remains a challenge. Here, a facile strategy was proposed to prepare a hollow dodecahedron constructed by vacancy-rich spinel Co₃S₄ nanoparticles in a self-generated H₂S atmosphere of thiourea. The morphology, composition, and electronic structure, especially the sulfur vacancy, of the cobalt sulfides can be regulated by the dose of thiourea. Benefitting from the H₂S atmosphere, the anion exchange process and vacancy introduction can be accomplished simultaneously. The resulting catalyst exhibits excellent catalytic activity for the OER with a low overpotential of 270 mV to reach a current density of 10 mA cm^-2 and a small Tafel slope of 59 mV dec^-1. Combined with various characterizations and electrochemical tests, the as-proposed defect engineering method could delocalize cobalt neighboring electrons and expose more Co²⁺ sites in spinel Co₃S₄, which lowers the charge transfer resistance and facilitates the formation of Co³⁺ active sites during the preactivation process. This work paves a new way for the rational design of vacancy-enriched transition metal-based catalysts toward an efficient OER.

Reconstruction of bimetal CoFe0.13-MOF to enhance the catalytic performance in the oxygen evolution reaction

Oxygen evolution reaction (OER) is a key process in electrochemical energy conversion systems. This paper found that the solvothermal reconstruction could resume the original morphology and generate more oxygen vacancies on the surface of oxyhydroxide. The reconstructed electrocatalyst (re-CoFe_0.13O_xH_y) presents promising long-term stability (>85 h) under 1 M KOH condition without replacing the electrolyte.

Recent developments of Co3O4-based materials as catalysts for the oxygen evolution reaction

The demand for the development of clean and efficient energy is becoming increasingly pressing due to depleting fossil fuels and environmental concerns.

Ce-Substituted Spinel CuCo2O4 Quantum Dots with High Oxygen Vacancies and Greatly Improved Electrocatalytic Activity for Oxygen Evolution Reaction

Exploring effective electrocatalysts for oxygen evolution reaction (OER) is a crucial requirement of many energy storage and transformation systems, involving fuel cells, water electrolysis, and metal-air batteries. Transition-metal oxides (TMOs) have attracted much attention to OER catalysts because of their earth abundance, tunable electronic properties, and so forth. Defect engineering is a general and the most important strategy to tune the electronic structure and control size, and thus improve their intrinsic activities. Herein, OER performance on spinel CuCo₂O₄ was greatly enhanced through cation substitution and size reduction. Ce-substituted spinel CuCe_δCo_2-δO_x (δ = 0.45, 0.5 and 0.55) nanoparticles in the quantum dot scale (2-8 nm) were synthesized using a simple and facile phase-transfer coprecipitation strategy. The as-prepared samples were highly dispersed and have displayed a low overpotential of 294 mV at 10 mA·cm^-2 and a Tafel slope of 57.5 mV·dec^-1, which outperform commercial RuO₂ and the most high-performance analogous catalysts reported. The experimental and calculated results all confirm that Ce substitution with an appropriate content can produce rich oxygen vacancies, tune intermediate absorption, consequently lower the energy barrier of the determining step, and greatly enhance the OER activity of the catalysts. This work not only provides advanced OER catalysts but also opens a general avenue to understand the structure-activity relationship of pristine TMO catalysts deeply in the quantum dot scale and the rational design of more efficient OER catalysts.

Synergetic Cobalt-Copper-Based Bimetal-Organic Framework Nanoboxes toward Efficient Electrochemical Oxygen Evolution

The development of efficient oxygen electrocatalysts and understanding their underlying catalytic mechanism are of significant importance for the high-performance energy conversion and storage technologies. Herein, we report novel CoCu-based bimetallic metal-organic framework nanoboxes (CoCu-MOF NBs) as promising catalysts toward efficient electrochemical oxygen evolution reaction (OER), fabricated via a successive cation and ligand exchange strategy. With the highly exposed bimetal centers and the well-designed architecture, the CoCu-MOF NBs show excellent OER activity and stability, with a small overpotential of 271 mV at 10 mA cm^-2 and a high turnover frequency value of 0.326 s^-1 at an overpotential of 300 mV. In combination of quasi in situ X-ray absorption fine structure spectroscopy and density-functional theory calculations, the post-formed CoCu-based oxyhydroxide analogue during OER is believed to account for the high OER activity of CoCu-MOF NBs, where the electronic synergy between Co and neighbouring Cu atoms promotes the O-O bond coupling toward fast OER kinetics.

Recent Progress on Transition Metal Based Layered Double Hydroxides Tailored for Oxygen Electrode Reactions

The oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), namely, so-called oxygen electrode reactions, are two fundamental half-cell reactions in the energy storage and conversion devices, e.g., zinc–air batteries and fuel cells. However, the oxygen electrode reactions suffer from sluggish kinetics, large overpotential and complicated reaction paths, and thus require efficient and stable electrocatalysts. Transition-metal-based layered double hydroxides (LDHs) and their derivatives have displayed excellent catalytic performance, suggesting a major contribution to accelerate electrochemical reactions. The rational regulation of electronic structure, defects, and coordination environment of active sites via various functionalized strategies, including tuning the chemical composition, structural architecture, and topotactic transformation process of LDHs precursors, has a great influence on the resulting electrocatalytic behavior. In addition, an in-depth understanding of the structural performance and chemical-composition-performance relationships of LDHs-based electrocatalysts can promote further rational design and optimization of high-performance electrocatalysts. Finally, prospects for the design of efficient and stable LDHs-based materials, for mass-production and large-scale application in practice, are discussed.

Tuning Reconstruction Level of Precatalysts to Design Advanced Oxygen Evolution Electrocatalysts

Surface reconstruction engineering is an effective strategy to promote the catalytic activities of electrocatalysts, especially for water oxidation. Taking advantage of the physicochemical properties of precatalysts by manipulating their structural self-reconstruction levels provide a promising methodology for achieving suitable catalysts. In this review, we focus on recent advances in research related to the rational control of the process and level of surface transformation ultimately to design advanced oxygen evolution electrocatalysts. We start by discussing the original contributions to surface changes during electrochemical reactions and related factors that can influence the electrocatalytic properties of materials. We then present an overview of current developments and a summary of recently proposed strategies to boost electrochemical performance outcomes by the controlling structural self-reconstruction process. By conveying these insights, processes, general trends, and challenges, this review will further our understanding of surface reconstruction processes and facilitate the development of high-performance electrocatalysts beyond water oxidation.

ZIF-67-based catalysts for oxygen evolution reaction

As a new type of crystalline porous material, the imidazole zeolite framework (ZIF) has attracted widespread attention due to its ultra-high surface area, large pore volume, and unique advantage of easy functionalization. Developing different methods to control the shape and composition of ZIF is very important for its practical application as catalyst. In recent years, nano-ZIF has been considered an electrode material with excellent oxygen evolution reaction (OER) performance, which provides a new way to research electrolyzed water. This review focuses on the morphological engineering of the original ZIF-67 and its derivatives (core-shell, hollow, and array structures) through doping (cation doping, anion doping, and co-doping), derivative composition engineering (metal oxide, phosphide, sulfide, selenide, and telluride), and the corresponding single-atom catalysis. Besides, combined with DFT calculations, it emphasizes the in-depth understanding of actual active sites and provides insights into the internal mechanism of enhancing the OER and proposes the challenges and prospects of ZIF-67 based electrocatalysts. We summarize the application of ZIF-67 and its derivatives in the OER for the first time, which has significantly guided research in this field.

Boosting the charge transfer of FeOOH/Ni(OH)2 for excellent oxygen evolution reaction via Cr modification

For the electrocatalytic oxygen evolution reaction (OER) in alkaline media, there is an urgent need to optimize the adsorption strength of OH*. Here, a flower-like hybrid of Cr-doped FeOOH/Ni(OH)2 was used as an OER catalyst with a low overpotential of 291 mV at 50 mA cm-2. The results showed that faster charge transfer was achieved at the electrode/solution interface during the OER process after the FeOOH/Ni(OH)2 was modified by Cr, which facilitates the rate-determining step of the Volmer reaction. Furthermore, the results of faradaic efficiency and X-ray photoelectron spectroscopy (XPS) measurements confirmed that the synergistic effect between the ternary metal and oxygen vacancies led to excellent OER performance. This work provides a new strategy for the preparation of high-efficiency and low-cost oxygen evolution electrocatalysts.

Self-supported cobalt–nickel bimetallic telluride as an advanced catalyst for the oxygen evolution reaction

The Ni-doped Co@CoTe2 electrode exhibits an outstanding OER activity and excellent long-term stability and outperforms most of the well-studied Co-based dichalcogenides.