A two-dimensional CdO/CdS heterostructure used for visible light photocatalysis

Electrical field and biaxial strain tunable electronic properties of the PtSe2/Hf2CO2 heterostructure

The structure and electronic properties of two-dimensional vertical van der Waals PtSe2/Hf2CO2 heterostructure have been investigated based on first-principles calculations. The results show that the PtSe2 and Hf2CO2 monolayers form a type-I heterostructure with both the conduction band minimum (CBM) and valence band maximum (VBM) located at the Hf2CO2 layer. The electronic properties of PtSe2/Hf2CO2 heterostructure can be effectively adjusted by applying external electric field or biaxial strain. The transition in band alignment from type-I to type-II can be manipulated by controlling the strength and direction of the electric field. Additionally, the transition from type-I to type-II have also taken place under the strains, and the band gap of the PtSe2/Hf2CO2 heterostructure decreases with increasing the compressive or tensible strain. Under a strong strain of -8%, the PtSe2/Hf2CO2 heterostructure can transform from semiconductor to metal. These findings provide a promising method to tune the electronic properties of PtSe2/Hf2CO2 heterostructure and design a new vdW heterostructure in the applications for electronic and optoelectronic devices.

Ultrahigh Carrier Mobility in Two-Dimensional IV-VI Semiconductors for Photocatalytic Water Splitting

Two-dimensional materials have been developed as novel photovoltaic and photocatalytic devices because of their excellent properties. In this work, four δ-IV-VI monolayers, GeS, GeSe, SiS and SiSe, are investigated as semiconductors with desirable bandgaps using the first-principles method. These δ-IV-VI monolayers exhibit exceptional toughness; in particular, the yield strength of the GeSe monolayer has no obvious deterioration at 30% strain. Interestingly, the GeSe monolayer also possesses ultrahigh electron mobility along the x direction of approximately 32,507 cm²·V^-1·s^-1, which is much higher than that of the other δ-IV-VI monolayers. Moreover, the calculated capacity for hydrogen evolution reaction of these δ-IV-VI monolayers further implies their potential for applications in photovoltaic and nano-devices.

Half-metallic and magnetic semiconductor behavior in CdO monolayer induced by acceptor impurities

In this work, a doping approach is explored as a possible method to induce novel features in the CdO monolayer for spintronic applications. Monolayer CdO is a two-dimensional (2D) non-magnetic semiconductor material with a band gap of 0.82 eV. In monolayer CdO, a single Cd vacancy leads to magnetization of the monolayer with a total magnetic moment of -2μ_B, whereas its non-magnetic nature is preserved upon creating a single O vacancy. Doping the Cd sublattice with Cu-Ag and Au induces half-metallic character with a total magnetic moment of -1 and 1μ_B, respectively. Dopants and their neighboring O atoms produce mainly magnetic properties. By contrast, doping with N, P, and As at the O sublattice leads to the emergence of magnetic semiconductor behavior with a total magnetic moment of 1μ_B. Herein, magnetism originates mainly from the spin-asymmetric charge distribution in the outermost orbitals of the dopants. Bader charge analysis and charge density difference calculations indicate charge transfer from Cu, Ag and Au dopants to the host monolayer, whereas the N, P and As dopants exhibit important charge gains. These results suggest that doping with acceptor impurities is an efficient approach to functionalize the CdO monolayer to generate spin currents in spintronic devices.

Excellent photocatalytic properties in 2D ZnO/SiC van der Waals hetero-bilayers: water-splitting H2-fuel production

This research unravels the photocatalytic properties of a 2D ZnO/SiC van der Waals hetero-bilayer for potential water-splitting applications by first-principles calculations. Four unique stacking patterns are considered in studying the electronic and optical properties in the presence and absence of biaxial external strain. For pattern-I and II, large negative binding energy and positive phonon frequencies are observed, denoting chemical and mechanical stabilities. Under the HSE-06 pseudo potential, the calculated bandgap value for pattern-I and II reaches 2.86 eV and 2.74 eV, respectively. 2D ZnO/SiC shows a high absorption coefficient (∼10⁵ cm^-1). The absorption peak under biaxial strain could reach ∼3.5 times the peak observed under unstrained conditions. Under strain, a shift from compressive to tensile biaxial strain (-6% to 6%) results in a bandgap decrease from 3.18 eV to 2.52 eV and 3.09 eV to 2.43 eV, for pattern-I and II, respectively. The observed strain-driven kinetic overpotential for 2D ZnO/SiC pattern-I and II easily engenders photocatalytic redox reactions. The excellent mechanical durability and strain-driven large kinetic overpotential suggest 2D ZnO/SiC heterobilayers as a prospective material for water-splitting H₂-fuel production.

Two-dimensional SiC/AlN based type-II van der Waals heterobilayer as a promising photocatalyst for overall water disassociation

Two-dimensional (2D) van der Waals (vdW) heterostructures made by vertical assembling of two different layers have drawn immense attention in the photocatalytic water disassociation process. Herein, we suggest a novel 2D/2D vdW heterobilayer consisting of silicon carbide (SiC) and aluminum nitride (AlN) as an exciting photocatalyst for solar-to-hydrogen conversion reactions using first-principles calculations. Notably, the heterostructure presents an inherent type-II band orientation wherein the photogenic holes and electrons are spatially separated in the SiC layer and the AlN layer, respectively. Our results indicate that the SiC/AlN heterostructure occupies a suitable band-gap of 2.97 eV which straddles the kinetic overpotentials of the hydrogen production reaction and oxygen production reaction. Importantly, the built-in electric field at the interface created by substantial charge transfer prohibits carrier recombination and further improves the photocatalytic performance. The heterostructure has an ample absorption profile ranging from the ultraviolet to the near-infrared regime, while the intensity of the absorption reaches up to 2.16 × 10⁵ cm^-1. In addition, external strain modulates the optical absorption of the heterostructure effectively. This work provides an intriguing insight into the important features of the SiC/AlN heterostructure and renders useful information on the experimental design of a novel vdW heterostructure for solar energy-driven water disassociation with superior efficiency.

The First-Principles Study of External Strain Tuning the Electronic and Optical Properties of the 2D MoTe2/PtS2 van der Waals Heterostructure

Two-dimensional van der Waals (vdW) heterostructures reveal novel properties due to their unique interface, which have attracted extensive focus. In this work, the first-principles methods are explored to investigate the electronic and the optical abilities of the heterostructure constructed by monolayered MoTe₂ and PtS₂. Then, the external biaxial strain is employed on the MoTe₂/PtS₂ heterostructure, which can persist in the intrinsic type-II band structure and decrease the bandgap. In particular, the MoTe₂/PtS₂ vdW heterostructure exhibits a suitable band edge energy for the redox reaction for water splitting at pH 0, while it is also desirable for that at pH 7 under decent compressive stress. More importantly, the MoTe₂/PtS₂ vdW heterostructure shows a classy solar-to-hydrogen efficiency, and the light absorption properties can further be enhanced by the strain. Our results showed an effective theoretical strategy to tune the electronic and optical performances of the 2D heterostructure, which can be used in energy conversion such as the automotive battery system.

Promoted photocarrier separation by dipole engineering in two-dimensional perovskite/C2N van der Waals heterostructures

Due to the aggravation of environmental pollution and the energy crisis, it is urgent to develop and design environment-friendly and efficient photocatalysts for water splitting. van der Waals heterostructures composed of different two-dimensional materials offer an easily accessible way to combine properties of individual materials for applications. Herein, a novel Cs₃Bi₂I₉/C₂N heterostructure is proposed through first-principles calculations. The structural, electronic, and optical properties, as well as the charge transfer mechanism at the interface of Cs₃Bi₂I₉/C₂N are systematically investigated. Due to the difference between the work functions of Cs₃Bi₂I₉ and C₂N monolayers, when they are constructed into heterostructures, redistribution of charge occurs in the whole structure, and some of the charge transfer occurs at the interface due to the formation of an internal electric field. The band structure of Cs₃Bi₂I₉/C₂N has type-II band alignment, and the band edge position as well as the band-gap value of the heterostructure are suitable for visible light water splitting. The in-plane biaxial strain, interfacial spacing, and external electric field can effectively modulate the electronic structure and photocatalytic performance of the heterostructure. Under certain conditions, the heterostructure can be changed from type-II to type-I band alignment, accompanied by the transition from an indirect band-gap semiconductor to a direct band-gap semiconductor. Moreover, the intrinsic anion defect (I vacancy) at different positions, as donor defects, can introduce defect levels near the conduction band edge, which affects the transition of photogenerated carriers in these systems. Our findings provide a theoretical design for strategies to improve the performance of two-dimensional perovskites/C₂N in photocatalytic and optoelectronic applications.

Photodegradation of Rhodamine-B Dye under Natural Sunlight using CdO

The present study includes synthesis of CdO thin film by simple and cost effective chemical bath deposition method. Cadmium monochloroaceatate were used for preparation of CdO thin film.  The structural, optical properties of CdO thin film were investigated with the help of X-ray diffraction (XRD) and UV-Vis NIR double beam spectrometry. The XRD studies revealed that annealed thin film shows crystalline in nature having 48.4 nm in size. The optical band gap of thin film was found to be 2.13 eV. Scanning Electron Microscopy (SEM) images shows sphere like structure which is closely arranged with each other. The presence of functional group was confirmed by Fourier Transform Infra Red (FTIR). Brunauer–Emmett–Teller (BET) surface area analysis confirm formation of a mesoporous CdO with 6.01 m2/g surface area and 31.96 nm average pore diameter. The photocatalytic activity of prepared thin film was checked by using Rhodamine-B as a model dye under natural sunlight and found to be 48%. Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

Puckered Penta-like PdPX (X = O, S, Te) Semiconducting Nanosheets: First-Principles Study of the Mechanical, Electro-Optical, and Photocatalytic Properties

The atomic, electronic, optical, and mechanical properties of penta-like two-dimensional PdPX (X = O, S, Te) nanosheets have been systematically investigated using density functional theory calculations. All three PdPX nanosheets exhibit dynamic and mechanical stability on the basis of an analysis of phonon dispersions and the Born criteria, respectively. The PdPX monolayers are found to be brittle structures. Our calculations demonstrate that the PdPX nanosheets exhibit semiconducting characteristics with indirect band gaps of 0.93 (1.99), 1.34 (2.11), and 0.74 (1.51) eV for X = O, S, Te, respectively, using the PBE (HSE06) functional, where PdPTe is the best material for visible-light photocatalytic water splitting. Our findings give important basic characteristics of penta-like two-dimensional PdPX materials and should motivate further theoretical and experimental investigations of these interesting materials.

First-Principles Calculations of Two-Dimensional CdO/HfS2 Van der Waals Heterostructure: Direct Z-Scheme Photocatalytic Water Splitting

Using two-dimensional (2D) heterostructure as photocatalyst for water splitting is a popular strategy for the generation of hydrogen. In this investigation, the first-principles calculations are explored to address the electronic performances of the 2D CdO/HfS₂ heterostructure formed by van der Waals (vdW) forces. The CdO/HfS₂ vdW heterostructure has a 1.19 eV indirect bandgap with type-II band alignment. Importantly, the CdO/HfS₂ vdW heterostructure possesses an intrinsic Z-scheme photocatalytic characteristic for water splitting by obtaining decent band edge positions. CdO donates 0.017 electrons to the HfS₂ layer in the heterostructure, inducing a potential drop to further separate the photogenerated electrons and holes across the interface. The CdO/HfS₂ vdW heterostructure also has excellent optical absorption capacity, showing a promising role as a photocatalyst to decompose the water.

Two-Dimensional PtS2/MoTe2 van der Waals Heterostructure: An Efficient Potential Photocatalyst for Water Splitting

Recently, the energy shortage has become increasingly prominent, and hydrogen (H₂) energy has attracted extensive attention as a clean resource. Two-dimensional (2D) materials show excellent physical and chemical properties, which demonstrates considerable advantages in the application of photocatalysis compared with traditional materials. In this investigation, based on first-principles methods, 2D PtS₂ and MoTe₂ are selected to combine a heterostructure using van der Waals (vdW) forces, which suggests a type-II band structure to prevent the recombination of the photogenerated charges. Then, the calculated band edge positions reveal the decent ability to develop the redox reaction for water splitting at pH 0. Besides, the potential drop between the PtS₂/MoTe₂ vdW heterostructure interface also can separate the photogenerated electrons and holes induced by the charge density difference of the PtS₂ and MoTe₂ layers. Moreover, the fantastic optical performances of the PtS₂/MoTe₂ vdW heterostructure further explain the promising advanced usage for photocatalytic decomposition of water.

Two-dimensional CdS/SnS2 heterostructure: a highly efficient direct Z-scheme water splitting photocatalyst

A desired water splitting photocatalyst should not only possess a suitable bandgap and band edge position, but also host the spontaneous progress for overall water splitting without the aid of any sacrificial agents. In this work, we propose a two-dimensional CdS/SnS₂ heterostructure (CSHS) as a possible water splitting photocatalyst by first-principles calculations. The CSHS enhances the absorption of visible and infrared light, and the type-II band alignment guarantees the spatial separation of the photoinduced carriers. The induced built-in electric field across the CSHS interface efficiently separates the photoexcited carriers and extends their carrier lifetimes. All these properties make the CSHS a direct Z-scheme system with the hydrogen and oxygen evolution reactions occurring, respectively, at the CdS and SnS₂ layers. More encouragingly, the introduction of a S-vacancy into SnS₂ could effectively lower the overpotential of the oxygen evolution reaction, thus ensuring the overall water redox reaction to be achieved spontaneously under light irradiation. Our findings suggest that the CSHS is a promising water splitting photocatalyst.

MoSSe/Hf(Zr)S2 heterostructures used for efficient Z-scheme photocatalytic water-splitting

HfS2/SMoSe, HfS2/SeMoS, ZrS2/SMoSe, and ZrS2/SeMoS heterostructures are promising overall water-splitting photocatalysts.

Band Bending Mechanism in CdO/Arsenene Heterostructure: A Potential Direct Z-scheme Photocatalyst

For the few years, two-dimensional (2D) materials have aroused general focus. In order to expand the properties and application range of 2D materials, two different layered materials are usually combined into heterostructure through van der Waals (vdW) interaction. In this research, based on first-principles simulation, we propose CdO/Arsenene (CdO/As) vdW heterostructure as a semiconductor possessing a direct bandgap by 2.179 eV. Besides, the CdO/As vdW heterostructure presents type-II band alignment, which can be used as a remarkable photocatalyst. Importantly, the CdO/As heterostructure demonstrates a direct Z-type principle photocatalyst by exploring the band bending mechanism in the heterostructure. Furthermore, we calculated the light absorption characteristics of CdO/As vdW heterostructure by optical absorption spectrum and conversion efficiency of a novel solar-to-hydrogen efficiency (η STH) about 11.67%, which is much higher than that of other 2D photocatalysts. Our work can provide a theoretical guidance for the designing of Z-scheme photocatalyst.

Ab Initio Calculations for the Electronic, Interfacial and Optical Properties of Two-Dimensional AlN/Zr2CO2 Heterostructure

Recently, expanding the applications of two-dimensional (2D) materials by constructing van der Waals (vdW) heterostructures has become very popular. In this work, the structural, electronic and optical absorption performances of the heterostructure based on AlN and Zr2CO2 monolayers are studied by first-principles simulation. It is found that AlN/Zr2CO2 heterostructure is a semiconductor with a band gap of 1.790 eV. In the meanwhile, a type-I band structure is constructed in AlN/Zr2CO2 heterostructure, which can provide a potential application of light emitting devices. The electron transfer between AlN and Zr2CO2 monolayer is calculated as 0.1603 |e| in the heterostructure, and the potential of AlN/Zr2CO2 heterostructure decreased by 0.663 eV from AlN layer to Zr2CO2 layer. Beisdes, the AlN/Zr2CO2 vdW heterostructure possesses excellent light absorption ability of in visible light region. Our research provides a theoretical guidance for the designing of advanced functional heterostructures.

Superior tunable photocatalytic properties for water splitting in two dimensional GeC/SiC van der Waals heterobilayers

The photocatalytic characteristics of two-dimensional (2D) GeC-based van der Waals heterobilayers (vdW-HBL) are systematically investigated to determine the amount of hydrogen (H2) fuel generated by water splitting. We propose several vdW-HBL structures consisting of 2D-GeC and 2D-SiC with exceptional and tunable optoelectronic properties. The structures exhibit a negative interlayer binding energy and non-negative phonon frequencies, showing that the structures are dynamically stable. The electronic properties of the HBLs depend on the stacking configuration, where the HBLs exhibit direct bandgap values of 1.978 eV, 2.278 eV, and 2.686 eV. The measured absorption coefficients for the HBLs are over ~ 105 cm-1, surpassing the prevalent conversion efficiency of optoelectronic materials. In the absence of external strain, the absorption coefficient for the HBLs reaches around 1 × 106 cm-1. With applied strain, absorption peaks are increased to ~ 3.5 times greater in value than the unstrained HBLs. Furthermore, the HBLs exhibit dynamically controllable bandgaps via the application of biaxial strain. A decrease in the bandgap occurs for both the HBLs when applied biaxial strain changes from the compressive to tensile strain. For + 4% tensile strain, the structure I become unsuitable for photocatalytic water splitting. However, in the biaxial strain range of - 6% to + 6%, both structure II and structure III have a sufficiently higher kinetic potential for demonstrating photocatalytic water-splitting activity in the region of UV to the visible in the light spectrum. These promising properties obtained for the GeC/SiC vdW heterobilayers suggest an application of the structures could boost H2 fuel production via water splitting.

The Band-Gap Studies of Short-Period CdO/MgO Superlattices

Trends in the behavior of band gaps in short-period superlattices (SLs) composed of CdO and MgO layers were analyzed experimentally and theoretically for several thicknesses of CdO sublayers. The optical properties of the SLs were investigated by means of transmittance measurements at room temperature in the wavelength range 200-700 nm. The direct band gap of {CdO/MgO} SLs were tuned from 2.6 to 6 eV by varying the thickness of CdO from 1 to 12 monolayers while maintaining the same MgO layer thickness of 4 monolayers. Obtained values of direct and indirect band gaps are higher than those theoretically calculated by an ab initio method, but follow the same trend. X-ray measurements confirmed the presence of a rock salt structure in the SLs. Two oriented structures (111 and 100) grown on c- and r-oriented sapphire substrates were obtained. The measured lattice parameters increase with CdO layer thickness, and the experimental data are in agreement with the calculated results. This new kind of SL structure may be suitable for use in visible, UV and deep UV optoelectronics, especially because the energy gap can be precisely controlled over a wide range by modulating the sublayer thickness in the superlattices.

The van der Waals CdO/PtS2 heterostructures for photocatalytic water splitting with excellent carrier separation and light absorption

The creation of hydrogen by photocatalytic water splitting is a core research area in the worldwide attempts to discover a valid substitute for fossil fuels.

Two dimensional CdS/ZnO type-II heterostructure used for photocatalytic water-splitting

The electronic structures of two dimensional (2D) CdS/ZnO heterostructure (CdZnHT) consisting of CdS singlelayer (SL) and ZnO SL are explored based on hybrid density functional calculation. The negative interface formation energies suggest the formation of CdZnHT is exothermic. The bandgap of CdZnHT is favorable for absorbing visible light, and the decent band edge position makes it thermodynamically feasible for spontaneous generation of oxygen and hydrogen. The formed electric field across the interface induced by charge transfer will reduce photogenerated carrier recombination and promote carrier migration. Particularly, CdZnHT is a type-II heterostructure. Oxygen generation takes place at ZnO layer and hydrogen production occurs at CdS layer, which will also promote the effective separation and migration of phogogenerated carriers and enhance photocatalytic performance. These findings suggest that 2D CdZnHTs are possible candidates as water-splitting photocatalysts.

Two-dimensional van der Waals heterostructure CdO/PtSe2: promising visible light photocatalyst for overall water splitting

Due to the gradual depletion of fossil fuels and the serious environmental pollution, hydrogen generation by photocatalytic water splitting has been considered as an alternative strategy for clean energy. Herein, using hybrid density functional calculations, we systematically study the structural, electronic and optical properties of van der Waals heterostructure CdO/PtSe₂ with different stacking patterns. The heterostructure is found to be dynamically stable, and has type-II band alignment with a large built-in electric field, which is favorable for the efficient spatial separation of photogenerated charge carriers. By revealing the intrinsic interface dipoles dependent photocatalytic mechanisms, we find the band edges of all patterns straddle the water redox levels despite the AB-1 pattern having a bandgap less than 1.23 eV. Moreover, the heterostructure shows globally improved optical absorptions with a large absorption coefficient (10⁵ cm^-1) compared to the single layers, demonstrating the enhanced photocatalytic activity. Comparing with widely discussed bilayer systems like graphene/C₃N₄ and MoS₂/C₃N₄, the CdO/PtSe₂ simultaneously has several advantages or peculiarities such as the more favorable absorption of visible light, therefore CdO/PtSe₂ is a promising candidate and a unique system for photocatalytic water splitting.

A two-dimensional h-BN/C2N heterostructure as a promising metal-free photocatalyst for overall water-splitting

The construction of a heterostructure (HS) is an effective strategy to modulate the desired properties of two-dimensional (2D) materials and to extend their applications. In this paper, based on the density functional theory, we predict a metal-free type-II HS formed by h-BN and C₂N single layers. The h-BN/C₂N HS possesses a smaller bandgap than individual h-BN and C₂N single layers, and it exhibits excellent visible light absorption. Importantly, its band edge positions satisfy the requirements for spontaneous water-splitting. With the assistance of the built-in electric field across the HS and the band offset, the photoinduced carriers can be readily spatially separated. Free energy calculations indicate the high catalytic activity for water oxidation and reduction reactions. The performance can be further enhanced by strain, which modulates the bandgap and the band edge positions of the HS. The band alignment may undergo a transition from type-I to type-II under strain, offering an effective switch for the reaction. The appropriate bandgap, suitable band edge positions, and effective carrier separation make the h-BN/C₂N HS a promising candidate for use as a photocatalyst in water-splitting.