Interplay between aggregation number, micelle charge and hydration of catanionic surfactants

Biomimetic protein structural transitions regulate activation and inhibition of the broad-spectrum bactericidal activity of cationic nanoparticles

The development of cationic polymers as alternative materials to antibiotics necessitates addressing the challenge of balancing their antimicrobial activity and toxicity. Here we propose a precise switching strategy inspired by biomimetic voltage-gated ion channels, enabling controlled activation and inhibition of cationic antimicrobial functions through protein conformational transitions in diverse physiological environments. Following thermodynamic studies on the specific recognition between mannose end groups on polycations and concanavalin A (ConA), we synthesized a type of ConA-polycation nanoparticle. The nanoparticle was inhibited under neutral conditions, with cationic moieties shielded by ConA's β-sheet. This shielding suppresses their antimicrobial activity, thereby ensuring satisfactory biocompatibility. In mildly acidic environments, however, the transition of a portion of ConA to an α-helix conformation exposed cations at the particle periphery, activating antibacterial functionality. Compared to inhibited nanoparticles, those in the activated state exhibited a 32-256 times reduction in the minimum bactericidal concentration against bacteria and fungi (2-16 µg/mL). In a murine acute pulmonary infection model, intravenous administration of inhibited nanoparticles effectively reduced bacterial counts by 4-log within 12 h. The biomimetic design, regulating cationic antimicrobial functionality through the alteration in protein secondary structure, significantly retards bacterial resistance development, holding great promise for intelligent antimicrobial materials. STATEMENT OF SIGNIFICANCE: Cationic antimicrobial polymers exhibit advantages distinct from antibiotics due to their lower propensity for resistance development. However, the presence of cationic moieties also poses a threat to healthy cells and tissues, significantly constraining their potential for clinical applications. To address this challenge, we propose a biomimetic strategy that mimics voltage-gated ion channels to activate the antimicrobial functionality of cations selectively in bacterial environments through the conformational transitions of proteins between β-sheets and α-helices. In healthy tissues, the antimicrobial functionality is inhibited, ensuring satisfactory biocompatibility. Antimicrobial cationic materials capable of intelligent switching between an activated state and an inhibited state in response to environmental changes offer an effective strategy to prevent the development of resistance and mitigate potential side effects.

Chemistry of Carbon-Substituted Derivatives of Cobalt Bis(dicarbollide)(1-) Ion and Recent Progress in Boron Substitution

The cobalt bis(dicarbollide)(1-) anion (1-), [(1,2-C2B9H11)2-3,3'-Co(III)](1-), plays an increasingly important role in material science and medicine due to its high chemical stability, 3D shape, aromaticity, diamagnetic character, ability to penetrate cells, and low cytotoxicity. A key factor enabling the incorporation of this ion into larger organic molecules, biomolecules, and materials, as well as its capacity for "tuning" interactions with therapeutic targets, is the availability of synthetic routes that enable easy modifications with a wide selection of functional groups. Regarding the modification of the dicarbollide cage, syntheses leading to substitutions on boron atoms are better established. These methods primarily involve ring cleavage of the ether rings in species containing an oxonium oxygen atom connected to the B(8) site. These pathways are accessible with a broad range of nucleophiles. In contrast, the chemistry on carbon vertices has remained less elaborated over the previous decades due to a lack of reliable methods that permit direct and straightforward cage modifications. In this review, we present a survey of methods based on metalation reactions on the acidic C-H vertices, followed by reactions with electrophiles, which have gained importance in only the last decade. These methods now represent the primary trends in the modifications of cage carbon atoms. We discuss the scope of currently available approaches, along with the stereochemistry of reactions, chirality of some products, available types of functional groups, and their applications in designing unconventional drugs. This content is complemented with a report of the progress in physicochemical and biological studies on the parent cobalt bis(dicarbollide) ion and also includes an overview of recent syntheses and emerging applications of boron-substituted compounds.

The correlation between the micelle morphology of surface-active ionic liquids with self-assembly and thermodynamic characteristics: coarse-grained MD simulation and experiment

Surface-active ionic liquids (SAILs) show great promise as novel green solvents due to their low vapor pressure, high thermal stability, high electrical conductivity, and bio-friendly nature to replace traditional volatile organic solvents in industrial processes. In the present work, the combination of coarse-grained (CG) molecular dynamics (MD) simulations with conductivity measurements was employed to explain the correlation between the micelle morphology and physicochemical and thermodynamic properties of self-assembly. A homologous series of SAIL molecules, 1-n-alkyl-3-methylimidazolium bromide [Cnmim][Br] (n = 4, 6, 8, 10, and 12), were chosen at various concentrations to shed light on this issue. Simultaneously two factors of concentration and alkyl chain length affected the morphology to control the physical and thermodynamic features. Moreover, the nature of the headgroup for two SAILs with the longest alkyl chain was assessed by shifting from imidazolium into ammonium. First, the critical micelle concentration (CMC), the degree of counterion dissociation of micelles, and the standard Gibbs energy of micellization of SAILs were determined using conductivity data. The micelle morphology such as the aggregation number, micelle radius, and moment of inertia was computed before, around, and after the CMC by MD simulation. Simulated results in accordance with the experimental measurements provide a quantitative understanding of the micellar properties. Increasing the alkyl chain length was associated with a non-spherical bigger micelle while the ammonium-based surfactant with a lower repulsion between neighboring monomers in micelles induced bigger and more spherical aggregates. Raising the SAIL concentration did not considerably influence the sphericity of the micelle except for the SAIL with the longest tail. The umbrella sampling method calculated the potential of mean force (PMF) for pulling a monomer of SAIL from a pre-assembled micelle into the solution. The dissociation energy of a SAIL monomer from a micelle increased with the tail length or with shifting into the ammonium head group and was substantially influenced by micelle morphology. Comparison between a sphere micelle with an oval one demonstrated that the dissociation of a SAIL monomer from a non-spherical shape needed a higher amount of energy. An improved understanding of how the shape of the SAIL micelles controls the physicochemical properties and stability helps to extend their application to different chemical processes.

Closo-dodecaborate-based dianionic surfactants with distorted classical morphology: Synthesis and atypical micellization in water

HYPOTHESIS

To challenge the classical concept of step-like micellization of ionic surfactants with singular critical micelle concentration, novel amphiphilic compounds with bulky dianionic head and the alkoxy tail connected via short linker, which can complex sodium cations, were synthesized in the form of disodium salts.

EXPERIMENT

The surfactants were synthesized by opening of a dioxanate ring attached to closo-dodecaborate by activated alcohol, which allows for attachment of alkyloxy tails of desired length to boron cluster dianion. The synthesis of the compounds with high cationic purity (sodium salt) is described. Self-assembly of the surfactant compound at air/water interface and in bulk water was studied by tensiometry, light and small angle X-ray scattering, electron microscopy, NMR spectroscopy, MD simulations and by isothermal titration calorimetry, ITC. The peculiarities in the micelle structure and formation were revealed by thermodynamic modelling and MD simulations of the micellization process.

FINDINGS

In an atypical process, the surfactants self-assemble in water to form relatively small micelles, where the aggregation number is decreasing with the surfactant concentration. The extensive counterion binding is a key characteristic of the micelles. The analysis strongly indicates complex compensation between the degree of bound sodium ions and the aggregation number. For the first time, a three-step thermodynamic model was used to estimate the thermodynamic parameters associated with micellization process. Diverse micelles differing in size and counterion binding can (co-)exist in the solution over the broad concentration and temperature range. Thus, the concept of step-like micellization was found inappropriate for these types of micelles.

Predicting the aggregation number of cationic surfactants based on ANN-QSAR modeling approaches: understanding the impact of molecular descriptors on aggregation numbers

In this work, a quantitative structure-activity relationship (QSAR) study is performed on some cationic surfactants to evaluate the relationship between the molecular structures of the compounds with their aggregation numbers (AGGNs) in aqueous solution at 25 °C. An artificial neural network (ANN) model is combined with the QSAR study to predict the aggregation number of the surfactants. In the ANN analysis, four out of more than 3000 molecular descriptors were used as input variables, and the complete set of 41 cationic surfactants was randomly divided into a training set of 29, a test set of 6, and a validation set of 6 molecules. After that, a multiple linear regression (MLR) analysis was utilized to build a linear model using the same descriptors and the results were compared statistically with those of the ANN analysis. The square of the correlation coefficient (R 2) and root mean square error (RMSE) of the ANN and MLR models (for the whole data set) were 0.9392, 7.84, and 0.5010, 22.52, respectively. The results of the comparison revealed the efficiency of ANN in detecting a correlation between the molecular structure of surfactants and their AGGN values with a high predictive power due to the non-linearity in the studied data. Based on the ANN algorithm, the relative importance of the selected descriptors was computed and arranged in the following descending order: H-047 > ESpm12x > JGI6> Mor20p. Then, the QSAR data was interpreted and the impact of each descriptor on the AGGNs of the molecules were thoroughly discussed. The results showed there is a correlation between each selected descriptor and the AGGN values of the surfactants.

N-Alkylimidazolium carboxylates as a new type of catanionic surface active ionic liquid: synthesis, thermotropic behavior and micellization in water

Aiming at a new type of salt-free CASAIL (Catanionic Surface Active IL) for electrochemical applications or emulsifiers, dispersants, and foaming or antifoaming agents, we combined mesogenic anions (carboxylate) and cations (imidazolium) of similar shape and size to synthesize a series of congruent ion pairs of 1-alkyl-3-methylimidazolium alkylcarboxylates [Cnmim][Cm-1COO] (n = 10-16, m = 10-16). With particular focus on alkyl chain length varieties in both, imidazolium cations and carboxylate anions (n/m), the self-assembly in the bulk phase and in solution was investigated by differential scanning calorimetry (DSC), polarized optical microscopy (POM), X-ray diffraction (XRD) experiments and surface tension measurements. Our results revealed that the presence of long alkyl chains on both the cation n and anion m leads to improved thermal stability of the bulk material while maintaining broad lamellar (SmA) mesophases. In water, we observed a strong and linear decrease of log(cmc) for increasing both the carboxylate anion and imidazolium cation chain length due to the increasing hydrophobic effect. Surprisingly, for both thermotropic behavior and micellization, the chain length of the carboxylate anion had a stronger impact than the chain length of the imidazolium cation, indicating its greater surface activity and tendency to form micelles.

Characterization of the Interactions between an Unassociated Cationic Pyrene-Labeled Gemini Surfactant and Anionic Sodium Dodecyl Sulfate

The gemini surfactant PyO-3-12, made of two dimethylammonium bromides joined by a propyl linker and bearing a dodecyl pendant on one side and a 1-pyrenemethoxyhexyl group on the other side, was employed to probe the interactions between positively charged PyO-3-12 and negatively charged sodium dodecyl sulfate (SDS). PyO-3-12 was selected for its ability to respond to the polarity of its local environment through the fluorescence intensity ratio I₁/I₃ of the first-to-third fluorescence peaks of the pyrene monomer and the local pyrene concentration [Py]_loc through the I_E/I_M ratio of the pyrene excimer-to-pyrene monomer fluorescence intensity. Furthermore, analysis of the fluorescence decays of aqueous solutions of PyO-3-12 and SDS yielded a measure of the internal dynamics, local concentration, and state (associated vs unassociated) of PyO-3-12 in solution. By following these parameters for aqueous solutions prepared with a constant PyO-3-12 concentration of either 1, 4, or 16 μM and SDS concentrations ranging from 0 to 200 mM, six SDS concentration regimes were identified to describe the interactions between PyO-3-12 and SDS in pure water. Sharp transitions of the parameters describing the fluorescence of pyrene marked the boundaries between the different regimes. Perhaps the most important transition was the one defining the formation of the PyO-3-12/SDS aggregates, which was completed at the equicharge point, implying that they were constituted of 1 meq of PyO-3-12 and 2 meq of SDS. The low I₁/I₃ ratio obtained for the PyO-3-12/SDS aggregates suggested that they were multilamellar aggregates, which would shield the pyrenyl labels from polar water. The formation of these multilamellar aggregates was confirmed by transmission electron microscopy (TEM), which demonstrated the existence of multilamellar vesicles, whose presence increased with decreasing PyO-3-12 concentration. This study suggests that the combination of pyrene excimer formation and TEM provides an interesting experimental means to probe the assemblies generated from oppositely charged surfactants at surfactant concentrations, which are much lower than their critical micelle concentration.

Simple ApproximaTion for Aggregation Number Determination by Isothermal Titration Calorimetry: STAND-ITC

A new proposal to obtain aggregation numbers from isothermal titration calorimetry dilution experiments is described and tested using dodecyl trimethyl ammonium bromide, dodecyl methylimidazolium chloride, dodecyl methylimidazolium sulfonate, and didecyl methylimidazolium chloride aqueous solutions at different temperatures. The results were compared to those obtained from fluorescence measurements and also with data from the literature. In addition to the aggregation number, the molar free energy to transfer a solute molecule from the aggregate to the bulk solution, the enthalpy corresponding to the formation of the self-assembled suprastructures, the molar heat corresponding to the dilution of monomers and aggregates, and an offset parameter to account for unpredictable external contributions are simultaneously obtained using the same method. The new equations are compared to those obtained from previous proposals, and they are also analyzed in detail to assess the impact of each fitting parameter in the profile of the calorimetric isotherm. This new approach has been implemented in a computational code that automatically determines the fitting parameters as well as the corresponding statistical uncertainties for the large variety of calorimetric profiles that have been tested. Given the high sensitivity of the dilution experiments to the aggregation number for relatively small assemblies, our approach is proposed also to quantify the oligomerization state of biomolecules such as proteins and peptides.

Efficient Photodynamic Therapy against Gram-Positive and Gram-Negative Bacteria Using Rose Bengal Encapsulated in Metallocatanionic Vesicles in the Presence of Visible Light

Significant consumption of antibiotics has generated multidrug resistance in bacteria, which is a major menace to human beings. Antibacterial photodynamic therapy (aPDT) is a progressing technique for inhibition of bacterial infection with minimal side effects. Metals and delivering agents play a major role in aPDT efficiency. Herein, we report a formulation to enrich the antibacterial photodynamic therapy utilizing metallocatanionic vesicles (MCVs) against both Gram-positive and Gram-negative bacteria. These MCVs were synthesized by utilizing iron-based double-chain metallosurfactant [FeCPC(II)] as a cationic surfactant and AOT, a double-chain anionic surfactant. These synthesized MCV fractions were characterized by distinct techniques like DLS, zeta potential, FE-SEM, confocal microscopy, SAXS, and UV-Visible spectroscopy. Polyhedral-shaped MCVs with a size of 200 nm were formed, wherein the charge and size of the catanionic vesicle can be controlled by varying the mixing ratios. Both Gram-positive bacteria, i.e., methicillin-resistant Staphylococcus aureus (MRSA), and Gram-negative bacteria, i.e., Escherichia coli (E. coli), were used for aPDT using Rose Bengal (RB) as a photosensitizer (PS) encapsulated in MCVs in the presence of a 532 nm wavelength laser. The aPDT against bacterial cells was evaluated for both dark and light toxicities. Pure MCVs also exhibited good antibacterial properties; however, much enhancement was observed in the presence of RB encapsulated in MCVs under light, where eradication of bacteria (E. coli and MRSA) was achieved in 30 min. The observations demonstrated that it is the presence of metal that enhances the singlet oxygen quantum yield of RB and MCVs help in retarding self-quenching and enhanced solubilization of RB. The cationic surfactant-rich fraction shows strong adhesion toward bacteria via electrostatic interactions. The outcome of this research shows that these newly fabricated metal-based metallocatanionic vesicles were effective against both Gram-positive and Gram-negative bacteria using aPDT and must be exploited for clinical applications as well as an alternative for antibiotics in the future.