Dual-mode optical biocompatible-sensor enabled by enzyme-like activity of UiO-66 (Zr) for ultra-sensitive ROS detection in vitro

The simple, effective and highly sensitive detection of hydrogen peroxide (H2O2), which belongs to the reactive oxygen species (ROS), at low concentrations plays an indispensable role in the field of environmental protection, biological research and safety. In this study, a dual-mode optical biosensor, UiO-66@OPD, was developed based on the inherent peroxidase mimicking activity of UiO-66 (Zr) and the optical reaction of ortho-phenylenediamine (OPD) by extending the π-system through oxidative coupling, prototropism and elimination to form OPDox, thereby exhibiting strong orangish absorbance and greenish fluorescence. The catalase-mimicking activity of UiO-66 (Zr) was demonstrated by the catalytic oxidation of methylene blue in the presence of H2O2. Moreover, the Michaelis-Menten kinetic model confirmed the intrinsic peroxidase-like activity of UiO-66@OPD as a modified MOFzyme. The synthesized UiO-66 (Zr) facilitated the oxidation of OPD to OPDox by degrading H2O2 to the hydroxyl radicals. During the oxidation process, the absorption peak at 415 nm and the fluorescence peak at 565 nm of the synthesized probe were significantly enhanced by increasing the H2O2 concentration. Moreover, a colorimetric and fluorometric ultrasensitive sensor shows a good linear relationship between the intensity enhancement and H2O2 concentration in the range of 0-600 nM for absorption and fluorescence spectra with R2 = 0.9772, and R2 = 0.9948, respectively. To demonstrate the biological performance and biocompatibility of UiO-66@OPD as a biosensor, MTT evaluation was performed for the three cell lines MCF-10 A, HEK293 and A549, indicating high biocompatibility and good cell viability for biological applications. Ultimately, this convenient, environmentally friendly, biocompatible and cost-effective catalase-mimicking-based sensor system will open a new perspective for the development of portable kite-based biosensors In vitro.

Sustainable chitosan-based materials as heterogeneous catalyst for application in wastewater treatment and water purification: An up-to-date review

Water pollution is one of serious environmental issues due to the rapid development of industrial and agricultural sectors, and clean water resources have been receiving increasing attention. Recently, more and more studies have witnessed significant development of catalysts (metal oxides, metal sulfides, metal-organic frameworks, zero-valent metal, etc.) for wastewater treatment and water purification. Sustainable and clean catalysts immobilized into chitosan-based materials (Cat@CSbMs) are considered one of the most appealing subclasses of functional materials due to their high catalytic activity, high adsorption capacities, non-toxicity and relative stability. This review provides a summary of various upgrading renewable Cat@CSbMs (such as cocatalyst, photocatalyst, and Fenton-like reagent, etc.). As for engineering applications, further researches of Cat@CSbMs should focus on treating complex wastewater containing both heavy metals and organic pollutants, as well as developing continuous flow treatment methods for industrial wastewater using Cat@CSbMs. In conclusion, this review abridges the gap between different approaches for upgrading renewable and clean Cat@CSbMs and their future applications. This will contribute to the development of cleaner and sustainable Cat@CSbMs for wastewater treatment and water purification.

Co-, Ni-, and Cu-Doped Fe-Based Catalysts for the Microwave-Assisted Catalytic Pyrolysis of Polyethylene

Environmental issues caused by waste polyethylene are becoming increasingly severe. Among potential treatment processes, microwave-assisted catalytic pyrolysis is promising for converting waste plastics into valuable products owing to its energy efficiency and environmental sustainability. Herein, a modified citric acid combustion method was used to prepare a series of metal oxide catalysts with loose porous structures. The prepared Fe-based catalysts doped with Co, Ni, or Cu were employed in the microwave-assisted catalytic pyrolysis of polyethylene. The bimetallic Co1Fe1Ox catalyst exhibited the best performance, yielding hydrogen at a rate of 60.7 mmol/gplastic. Further variation in the Co : Fe ratio revealed that the Co1Fe9Ox catalyst achieved the highest hydrogen production efficiency (63.64 mmol/gplastic). Similar oil-phase products were obtained over the various catalysts, as revealed by infrared spectroscopy and proton nuclear magnetic resonance spectroscopy. Furthermore, scanning electron microscopy (SEM) identified carbon nanotubes as the major solid product of pyrolysis, which were attached to the catalyst surface. Finally, a combination of thermogravimetric analysis, SEM, and energy-dispersive X-ray spectroscopy indicated that the reduction in catalytic activity following recycling was caused by the accumulation of carbonaceous products on the catalyst surface. Overall, Co1Fe9Ox catalysts were favorable for obtaining H2 and carbon nanotubes by the microwave-assisted pyrolysis of polyethylene.

Organic Covalent Interaction-based Frameworks as Emerging Catalysts for Environment and Energy Applications: Current Scenario and Opportunities

The term "covalent organic framework" (COF) refers to a class of porous organic polymeric materials made from organic building blocks that have been covalently bonded. The preplanned and predetermined bonding of the monomer linkers allow them to demonstrate directional flexibility in two- or three-dimensional spaces. COFs are modern materials, and the discovery of new synthesis and linking techniques has made it possible to prepare them with a variety of favorable features and use them in a range of applications. Additionally, they can be post-synthetically altered or transformed into other materials of particular interest to produce compounds with enhanced chemical and physical properties. Because of its tunability in different chemical and physical states, post-synthetic modifications, high stability, functionality, high porosity and ordered geometry, COFs are regarded as one of the most promising materials for catalysis and environmental applications. This study highlights the basic advancements in establishing the stable COFs structures and various post-synthetic modification approaches. Further, the photocatalytic applications, such as organic transformations, degradation of emerging pollutants and removal of heavy metals, production of hydrogen and Conversion of carbon dioxide (CO₂ ) to useful products have also been presented. Finally, the future research directions and probable outcomes have also been summarized, by focusing their promises for specialists in a variety of research fields.

Effect of magnetic field on the removal of copper from aqueous solution using activated carbon derived from rice husk

Adsorptive removal of copper by activated carbon derived from modified rice husk (ACRH) was studied in the presence and absence of magnetic field (MF). The ACRH was prepared from the normal rice husk treated by NaOH solution and subsequent pyrolysis at 450 °C in the absence of oxygen. The physicochemical properties of ACRH's were determined before and after the adsorption process to delineate the adsorption mechanism. The BET analysis confirmed that the fabricated ACRH has a specific surface area of 8.244 m²/g with a mesopore to micropore ratio of 0.974. It was observed that the micropore structure gradually replaced the mesopores, and the surface area of the micropore increased (from 0.9219 to 4.1764 m²/g), and the pore diameter was also decreased from 180.381 to 46.249 Å after pyrolysis. The CHNO/S test result reveals that the carbon content was increased from 42 to 67.8% in the ACRH after pyrolysis. The batch sorption studies were performed by varying the initial adsorbate concentration, temperature, agitation speed, pH, adsorbent dose and contact time for magnetic and non-magnetic conditions to analyze the effect of the magnetic field. The univariate studies show that the maximum experimental adsorption capacity was 4.522 mg/g and 3.855 mg/g, respectively, for these two conditions (representing the magnetic impact) at 25 °C with an adsorbent dose of 2 g/L and an agitation speed of 150 rpm. It was also observed that the removal efficiency was 94.55% and 77.96% (magnetic and non-magnetic condition) at pH 7 with a concentration of 10 mg/L in 2 h. The test result on the impact of exposure time on the magnetic field suggested that the magnetic memory influenced the removal efficiency; after 40 to 60 min, the maximum removal efficiency was achieved, around 80 to 90%. The pseudo-second-order kinetic model was best fitted with the experimental data with a rate constant as 0.1749 and 0.1006 g/mg/min for these two conditions. The Temkin model delineates the adsorption isotherm suggesting the heat generated during the adsorption process is linearly abate with the coverage of the surface area of the adsorbent. The thermodynamic model confirms that the copper adsorption is spontaneous (ΔG = - 3.91 kJ/mol and - 6.02 kJ/mol), wherein the negative enthalpy value (ΔH = - 36.74 kJ/mol and - 25.74 kJ/mol) suggested that the process is exothermic irrespective of magnetic interference. The significant enhancement of copper removal was observed by incorporating the magnetic field, showing an increase in sorption capacity by 17.48% and a reduction of reaction time by 88.12%.

Immobilized biogenic copper nanoparticles from metallic wastewater as catalyst for triazole synthesis by click reaction using water as solvent

In this study, biogenic copper nanoparticles from metallic wastewater were examined for triazoles synthesis by click reaction. The size of the copper nanoparticles obtained by biogenic sulfate reduction of synthetic...

Covalent organic frameworks-based smart materials for mitigation of pharmaceutical pollutants from aqueous solution

Covalent organic frameworks (COFs) are an emergent group of crystalline porous materials that have gained incredible interest in recent years. With foreseeable controllable functionalities and structural configurations, the constructions and catalytic properties of these organic polymeric materials can be controlled to fabricate targeted materials. The specified monomer linkers and pre-designed architecture of COFs facilitate the post-synthetic modifications for introducing novel functions and useful properties. By virtue of inherent porosity, robust framework, well-ordered geometry, functionality, higher stability, and amenability to functionalization, COFs and COFs-based composites are regarded as prospective nanomaterials for environmental clean-up and remediation. This report spotlights the state-of-the-art advances and progress in COFs-based materials to efficiently mitigate pharmaceutical-based environmental pollutants from aqueous solutions. Synthesis approaches, structure, functionalization, and sustainability aspects of COFs are discussed. Moreover, the adsorptive and photocatalytic potential of COFs and their derived nanocomposites for removal and degradation of pharmaceuticals are thoroughly vetted. In addition to deciphering adsorption mechanism/isotherms, the stability, regeneratability and reproducibility are also delineated. Lastly, the outcomes are summed up, and new directions are proposed to widen the promise of COF-based smart materials in diverse fields.

Cellulose-deconstruction potential of nano-biocatalytic systems: A strategic drive from designing to sustainable applications of immobilized cellulases

Nanostructured materials along with an added value of polymers-based support carriers have gained high interest and considered ideal for enzyme immobilization. The recently emerged nanoscience interface in the form of nanostructured materials combined with immobilized-enzyme-based bio-catalysis has now become research and development frontiers in advance and applied bio-catalysis engineering. With the involvement of nanoscience, various polymers have been thoroughly developed and exploited to nanostructured engineer constructs as ideal support carriers/matrices. Such nanotechnologically engineered support carriers/matrix possesses unique structural, physicochemical, and functional attributes which equilibrate principal factors and strengthen the biocatalysts efficacy for multipurpose applications. In addition, nano-supported catalysts are potential alternatives that can outstrip several limitations of conventional biocatalysts, such as reduced catalytic efficacy and turnover, low mass transfer efficiency, instability during the reaction, and most importantly, partial, or complete inhibition/deactivation. In this context, engineering robust and highly efficient biocatalysts is an industrially relevant prerequisite. This review comprehensively covered various biopolymers and nanostructured materials, including silica, hybrid nanoflower, nanotubes or nanofibers, nanomembranes, graphene oxide nanoparticles, metal-oxide frameworks, and magnetic nanoparticles as robust matrices for cellulase immobilization. The work is further enriched by spotlighting applied and industrially relevant considerations of nano-immobilized cellulases. For instance, owing to the cellulose-deconstruction features of nano-immobilized cellulases, the applications like lignocellulosic biomass conversion into industrially useful products or biofuels, improved paper sheet density and pulp beat in paper and pulp industry, fruit juice clarification in food industry are evident examples of cellulases, thereof are discussed in this work.

Hepatotoxicity of copper sulfide nanoparticles towards hepatocyte spheroids using a novel multi-concave agarose chip method

Aim: To explore the hepatotoxicity of copper sulfide nanoparticles (CuSNPs) toward hepatocyte spheroids. Materials & methods: Other than the traditional agarose method to generate hepatocyte spheroids, we developed a multi-concave agarose chip (MCAC) method to investigate changes in hepatocyte viability, morphology, mitochondrial membrane potential, reactive oxygen species and hepatobiliary transporter by CuSNPs. Results: The MCAC method allowed a large number of spheroids to be obtained per sample. CuSNPs showed hepatotoxicity in vitro through a decrease in spheroid viability, albumin/urea production and glycogen deposition. CuSNPs also introduced hepatocyte spheroid injury through alteration of mitochondrial membrane potential and reactive oxygen species, that could be reversed by N-acetyl-l-cysteine. CuSNPs significantly decreased the activity of BSEP transporter by downregulating its mRNA and protein levels. Activity of the MRP2 transporter remained unchanged. Conclusion: We observed the hepatotoxicity of CuSNPs in vitro with associated mechanisms in an advanced 3D culture system.

Lignin peroxidase in focus for catalytic elimination of contaminants - A critical review on recent progress and perspectives

Lignin peroxidase (LiP) seems to be a catalyst for cleaving high-redox potential non-phenolic compounds with an oxidative cleavage of CC and COC bonds. LiP has been picked to seek a practical and cost-effective alternative to the sustainable mitigation of diverse environmental contaminants. LiP has been an outstanding tool for catalytic cleaning and efficient mitigation of environmental pollutants, including lignin, lignin derivatives, dyes, endocrine-disrupting compounds (EDCs), and persistent organic pollutants (POPs) for the past couple of decades. The extended deployment of LiP has proved to be a promising method for catalyzing these environmentally related hazardous pollutants of supreme interest. The advantageous potential and capabilities to act at different pH and thermostability offer its working tendencies in extended environmental engineering applications. Such advantages led to the emerging demand for LiP and increasing requirements in industrial and biotechnological sectors. The multitude of the ability attributed to LiP is triggered by its stability in xenobiotic and non-phenolic compound degradation. However, over the decades, the catalytic activity of LiP has been continuing in focus enormously towards catalytic functionalities over the available physiochemical, conventional, catalyst mediated technology for catalyzing such molecules. To cover this literature gap, this became much more evident to consider the catalytic attributes of LiP. In this review, the existing capabilities of LiP and other competencies have been described with recent updates. Furthermore, numerous recently emerged applications, such as textile effluent treatment, dye decolorization, catalytic elimination of pharmaceutical and EDCs compounds, have been discussed with suitable examples.

Cationic zinc (II) phthalocyanine nanoemulsions for photodynamic inactivation of resistant bacterial strains

BACKGROUND

The growing emergence of microbial resistance to antibiotics represents a worldwide challenge. Antimicrobial photodynamic inactivation (aPDI) has been introduced as an alternative technique, especially when combined with nanotechnology. Therefore, this study was designed to investigate the therapeutic merits of combined aPDI and nanoemulsion in infections caused by resistant bacterial strains.

METHODS

Cationic zinc (II) phthalocyanine nanoemulsions (ZnPc-NE) were prepared using isopropyl myristate (IPM) as oil phase, egg phosphatidylcholine (egg PC) as emulsifier, and N-cetyl-N,N,N-trimethyl ammonium bromide (CTAB). Nanoemulsions were characterized for particle size, polydispersity, zeta potential, viscosity, and skin deposition. The in-vitro aPDI was investigated on human resistant pathogens; gram-positive methicillin-resistant Staphylococcus aureus (MRSA) and gram-negative Multidrug-resistant strain of Escherichia coli (MDR E. coli), under different experimental conditions. In addition, in-vivo model of abrasion wound infected by MDR E. coli was induced in rats to investigate the therapeutic potential of the selected formulation.

RESULTS

It was evident that the selected ZnPc formulation (20 % IPM, 2 % egg PC and 0.5 % CTAB) displayed a particle size of 209.9 nm, zeta potential +73.1 mV, and 23.66 % deposition of ZnPc in skin layers. Furthermore, the selected formulation combined with light achieved almost 100 % eradication of the two bacterial strains, with superior bacterial load reduction and wound healing propertiesin-vivo, compared to either the nanoemulsion formulation or laser alone.

CONCLUSION

ZnPc nanoemulsion improved antimicrobial photodynamic therapy in inactivating resistant bacterial infections and provided a promising therapeutic means of treating serious infections, and hence could be applied in diseases caused by other bacterial strains.

Facile synthesis of gold-silver/copper sulfide nanoparticles for the selective/sensitive detection of chromium, photochemical and bactericidal application

In this project, bimetallic Au-Agnanoparticles/CuS nanoparticles were prepared via simple hydrothermal methods, which were used as highly efficient material for Cr (III) detection, photocatalytic, and biological process. The Au-Ag/CuS nanoparticles was studied via UV-visible spectroscopy, field-emission scanning electron microscopy, Dynamic light scattering, and X-ray diffraction. The zeta potential and effective size of Au-Ag/CuS nanoparticles was -32.1 mV and 25 nm respectively. The response time of Cr (III) ions interaction was 2 min. The lowest detection of Cr (III) by Au-Ag/CuS nanoparticles was 0.5 nM. The Au-Ag/CuS nano catalyst was applied to decomposition of drug under visible lamp irradiation. The photo degradation response of drug was 100.0% in 30 min irradiation. The particles exhibited excellent antibacterial activities.

Triphenylphosphonium-functionalized nanocomposites as carriers of a platinum diimine complex for photodynamic therapy

The photodamage induced by PDT usually occurs at the site where the photosensitizers accumulate in the tumor cells, thus the modulation of intrinsic apoptosis by mitochondria-targeting PDT drugs might be a promising way to enhance the therapeutic efficacy of PDT drugs against tumor cells. Novel triphenylphosphonium-functionalized nanocomposites employed as carriers of a photoactive platinum diimine complex have been fabricated and characterized. Upon irradiation, the IC₅₀ value of photosensitizer-loaded triphenylphosphonium-functionalized nanocomposites was found to be 17.4 or 14.4 times lower than that of the photosensitizer studied alone against HCT116 cells or A549 cells, respectively. The results suggested that the triphenylphosphonium- functionalized nanocomposites as drug delivery vehicles could significantly enhance the photodynamic efficacy of the photosensitizer.

Kinetic and thermodynamic studies of novel acid phosphates extracted from Cichorium intybus seedlings

Herein for the first time a novel acid phosphatase from the seedlings of Cichorium intybus was purified to homogeneity by using various chromatographic techniques (salt precipitation, ion exchange, size exclusion and affinity chromatography) and thermodynamically characterized. The molecular mass of purified enzyme (66 kDa) was determined by SDS-PAGE under denaturing and non-denaturing conditions and by gel-filtration confirmed as dimer of molecular mass 130 kDa. The Michaelis-Menten (Km) constant for -p-NPP (0.3 mM) and (7.6 μmol/min/mg) Vmax. The enzyme was competitively inhibited by phosphate, molybdate and vanadate. Phenyl phosphate, ɑ and β-glycero-phosphate and-p-NPP were found to be good substrate. When temperature increased from (55 °C to 75 °C), the deactivation rate constant (kd) was increased (0.1 to 4.6 min-1) and half- life was decreased from 630 min to 15 min. Various thermal denaturation parameters; change in enthalpy (ΔH°), change in entropy (ΔS°) and change in free energy (ΔG°) were found 121.93 KJ·mol-1, 72.45 KJ·mol-1 and 98.08 KJ·mol-1 respectively, confirming that acid phosphatase undergoes a significant process of unfolding during deactivation. The biochemical properties of acid phosphatase from C. intybus on the behalf of biological activity and its relationship to pH variations, thermal deactivation and kinetics parameters provide an insight into its novel features.

Enzymatic degradation of ginkgolic acids by laccase immobilized on core/shell Fe3O4/nylon composite nanoparticles using novel coaxial electrospraying process

Enzyme immobilization can increase enzyme reusability to reduce cost of industrial production. Ginkgo biloba leaf extract is commonly used for medical purposes, but it contains ginkgolic acid, which has negative effects on human health. Here, we report a novel approach to solve the problem by degrading the ginkgolic acid with immobilized-laccase, where core/shell composite nanoparticles prepared by coaxial electrospraying might be first applied to enzyme immobilization. The core/shell Fe₃O₄/nylon 6,6 composite nanoparticles (FNCNs) were prepared using one-step coaxial electrospraying and can be simply recovered by magnetic force. The glutaraldehyde-treated FNCNs (FNGCNs) were used to immobilize laccase. As a result, thermal stability of the free laccase was significantly improved in the range of 60-90 °C after immobilization. The laccase-immobilized FNGCNs (L-FNGCNs) were applied to degrade the ginkgolic acids, and the rate constants (k) and times (τ₅₀) were ~0.02 min^-1 and lower than 39 min, respectively, showing good catalytic performance. Furthermore, the L-FNGCNs exhibited a relative activity higher than 0.5 after being stored for 21 days or reused for 5 cycles, showing good storage stability and reusability. Therefore, the FNGCNs carrier was a promising enzyme immobilization system and its further development and applications were of interest.

Tyrosinase-mediated melanogenesis in melanoma cells: Array comparative genome hybridization integrating proteomics and bioinformatics studies

We investigated the tyrosinase-associated melanogenesis in melanoma cells by using OMICS techniques. We characterized the chromosome copy numbers, including Chr 11q21 where the tyrosinase gene is located, from several melanoma cell lines (TXM13, G361, and SK-MEL-28) by using array CGH. We revealed that 11q21 is stable in TXM13 cells, which is directly related to a spontaneous high melanin pigment production. Meanwhile, significant loss of copy number of 11q21 was found in G361 and SK-MEL-28. We further profiled the proteome of TXM13 cells by LC-ESI-MSMS and detected more than 900 proteins, then predicted 11 hub proteins (YWHAZ; HSP90AA1; HSPA5; HSPA1L; HSPA9; HSP90B1; HSPA1A; HSPA8; FKSG30; ACTB; DKFZp686DQ972) by using an interactomic algorithm. YWHAZ (25% interaction in the network) is thought to be a most important protein as a linking factor between tyrosinase-triggered melanogenesis and melanoma growth. Bioinformatic tools were further applied for revealing various physiologic mechanisms and functional classification. The results revealed clues for the spontaneous pigmentation capability of TXM13 cells, contrary to G361 and SK-MEL-28 cells, which commonly have depigmentation properties during subculture. Our study comparatively conducted the genome-wide screening and proteomic profiling integrated interactomics prediction for TXM13 cells and suggests new insights for studying both melanogenesis and melanoma.

Utilization of the common functional groups in bioactive molecules: Exploring dual inhibitory potential and computational analysis of keto esters against α-glucosidase and carbonic anhydrase-II enzymes

Diabetes mellitus, a progressive chronic disease, characterized by the abnormal carbohydrate metabolism is associated with severe health complications including long term dysfunction or failure of several organs, cardiovascular and micro-angiopathic problems (neuropathy, nephropathy, retinopathy). Despite the existence of diverse chemical structural libraries of α-glucosidase inhibitors, the limited diabetic treatment due to the adverse side effects such as abdominal distention, flatulence, diarrhoea, and liver damage associated with these inhibitors encourage the medicinal research community to design and develop new and potent inhibitors of α-glucosidase with better pharmacokinetic properties. In this perspective, we demonstrate the successful integration of common functional groups (ketone & ester) in one combined pharmacophore which is favorable for the formation of hydrogen bonds and other weaker interactions with the target proteins. These keto ester derivatives were screened for their α-glucosidase inhibition potential and the in vitro results revealed compound 3c as the highly active inhibitor with an IC₅₀ value of 12.4 ± 0.16 μM compared to acarbose (IC₅₀ = 942 ± 0.74 μM). This inhibition potency was ~76-fold higher than acarbose. Other potent compounds were 3f (IC₅₀ = 28.0 ± 0.28 μM), 3h (IC₅₀ = 33.9 ± 0.09 μM), 3g (IC₅₀ = 34.1 ± 0.04 μM), and 3d (IC₅₀ = 76.5 ± 2.0 μM). In addition, the emerging use of carbonic anhydrase inhibitors for the treatment of diabetic retinopathy (a leading cause of vision loss) prompted us to screen the keto ester derivatives for the inhibition of carbonic anhydrase-II. Compound 3b was found significantly active against carbonic anhydrase-II with an IC₅₀ of 16.5 ± 0.92 μM (acetazolamide; IC₅₀ = 18.2 ± 1.23 μM). Compound 3a also exhibited comparable potency with an IC₅₀ value of 18.9 ± 1.08 μM. Several structure-activity relationship analyses depicted the influence of the substitution pattern on both the aromatic rings. Molecular docking analysis revealed the formation of several H-bonding interactions through the ester carbonyl and the nitro oxygens of 3c with the side chains of His348, Arg212 and His279 in the active pocket of α-glucosidase whereas 3b interacted with His95, -OH of Thr197, Thr198 and WAT462 in the active site of carbonic anhydrase-II. Furthermore, evaluation of ADME properties suggests the safer pharmacological profile of the tested derivatives.