The chemistry of Ce-based metal-organic frameworks

A Propeller-Like Ligand-Directed Construction of a Tetranuclear Cerium-Organic Framework for Single-Step Ethylene Purification from Ternary C2 Mixtures

The efficient single-step purification of ethylene from ternary C2 mixtures containing ethane and acetylene is challenging and demanding. Herein, we introduce a novel cerium-based metal-organic framework (MOF) of Ce-NTB-rtk synthesized via a ligand-conformer strategy. The Ce-NTB-rtk features a rare tetranuclear cerium cluster and 2D kgd layers pillared by a 3D rtl framework concomitant with an extraordinary (3,3,12)-c network. The compound encompasses microporous cavities replete with a nonpolar microenvironment. Gas sorption and breakthrough experiments demonstrate its superior affinity for C2H6 and C2H2 over C2H4, enabling effective single-step ethylene purification. Computational simulations reveal that preferential adsorptions are facilitated by different interaction strengths of C-H···O hydrogen bonds. The performance of Ce-NTB-rtk in separation selectivity and regeneration capacity makes it a promising candidate for sustainable and cost-effective ethylene purification, showcasing the potential of MOFs in advanced gas separation applications.

Cerium(III) and 5-methylisophthalate-based MOFs with slow relaxation of magnetization and photoluminescence emission

Two novel Ce(III) metal organic frameworks (MOFs) with formulas [Ce(5Meip)(H-5Meip)]nGR-MOF-17 and [CeCl(5Meip)(DMF)]nGR-MOF-18 (5Meip = 5-methylisophthalate, DMF = N,N-dimethylformamide) have been synthesized, forming 3-dimensional frameworks. Magnetic measurements show that both compounds present field-induced slow magnetic relaxation under a small applied dc field. For GR-MOF-17, the temperature dependence of relaxation times is best described by a Raman mechanism, whereas for GR-MOF-18, relaxation occurs through a combination of Raman and local-mode pathways. Moreover, when avoiding short Ce⋯Ce interactions by magnetic dilution in GR-MOF-17@La and GR-MOF-18@La, only the local-mode mechanism is responsible for magnetic relaxation. Photophysical studies show the occurrence of ligand-centred luminescence in both compounds and phosphorescence emission at low temperature for GR-MOF-17.

Urea production via photocatalytic coupling of mixed gases (CO2/NH3) using Mo(MnO4)5 supported on Ce-BTC as nano-composite catalyst

Urea used in fertilization and feed supplement, as well as a starting material for the manufacture of plastics and drugs. Urea is most commonly produced by reacting carbon dioxide with ammonia at high temperature. Photocatalysis has gained attention as a sustainable pathway for performing urea. This work focus on designing very active photocatalysts based on cerium organic framework (Ce-BTC) doped with metal oxide nanoparticles (molybdenum permanganate, Mo(MnO4)5) for production of urea from coupling of ammonia with carbon dioxide. The prepared materials were characterized using different spectral analysis and the morphology was analysed using microscopic data. The effect of catalyst loading on the production rate of urea was investigated and the obtained results showed speed rate of urea production with high production yield at low temperature. The recyclability tests confirmed the sustainability of the prepared photocatlysts (Mo(MnO4)5@Ce-BTC) which supported the beneficial of the photocatalysis process in urea production.

Applications of cerium-based materials in food monitoring

With the rapid development of society, food safety to public health has been a topic that cannot be ignored. In recent years, lanthanide-based materials are studied to be potential candidates in the detection of food samples. Cerium (Ce)-based materials (such as Ce ions, CeO2, Ce-metal organic framework (Ce-MOF), etc.) have also attracted more attention in food detection by virtue of colorimetric, fluorescence, sensing, and other methods. This is because the mixed valence of Ce (Ce3+ and Ce4+), the formation of oxygen vacancies, and their optical and electrochemical properties. In this review, Ce-based materials will be introduced and discussed in the field of food detection, including biogenesis, construction, catalytic mechanisms, combination, and applications. In addition, the current challenges and future development trend of these Ce-based materials in food safety detection are also proposed and discussed. Therefore, it is meaningful to explore the Ce-based materials for detection of biomarkers in food samples.

Synthesis, Structure and (Photo)Catalytic Behavior of Ce-MOFs Containing Perfluoroalkylcarboxylate Linkers: Experimental and Theoretical Insights

Cerium-based Metal-Organic frameworks (Ce-MOFs) are attracting increasing interest due to their similar structural features to zirconium MOFs. The redox behavior of Ce(III/IV) adds a range of properties to the compounds. Recently, perfluorinated linkers have been used in the synthesis of MOFs to introduce new characteristic into the structure. We report the synthesis and structural characterization of Ce(IV)-based MOFs constructed using two perfluorinated alkyl linkers. Their structure, based on hexanuclear Ce6O4(OH)4 12+ clusters linked to each other by the dicarboxylate ions, has been solved ab-initio from X-ray powder diffraction data and refined by the Rietveld method. The crystallization kinetics and the MOF formation mechanism was also invesitigated by Synchrotron radiation with XAS spectroscopies (EXAFS and XANES). The MOFs present the same fcu cubic topology as observed in MOF-801 and UiO-66, and they showed good stability in water at different pH conditions. The electronic structure of these MOFs has been studied by DFT calculations in order to obtain insights into the density of states structure of the reported compounds, resulting in band gaps in the range of 2.8-3.1 eV. Their catalytic properties were tested both thermally and under visible light irradiation for the degradation of methyl orange (MO) dye.

Evaluation of Ce-MOFs as Photoanode Materials for the Water Oxidation Reaction: The Effect of Doping with [Ru(bpy)(dcbpy)(H2O)2]2+ Catalyst

Artificial photosynthesis stands out as a highly effective method for harnessing sunlight to produce clean and renewable energy. The light-absorbing properties, chemical stability, and high redox activity of Ce-based metal-organic frameworks (MOFs) make them attractive materials for visible-light-driven water splitting. Currently, Ce-based MOFs remain a relatively underexplored system for photocatalytic water oxidation in acidic media. In this study, we synthesized a Ce-MOF with different linkers (1,4-benzenedicarboxylic acid, tetrafluoroterephthalic acid, 2-nitroterephthalic acid, 2,2'-bipyridine-5,5'-dicarboxylic acid, and 4,4'-biphenyldicarboxylic acid), which exhibit light-absorbing capability. Ce-based MOFs doped with [Ru(bpy)(dcbpy)(H2O)2]2+ (MOF-1 and MOF-2) water oxidation catalyst showed an enhanced photoelectrocatalytic current of ∼10-4 A·cm-2 at pH = 1, which is comparable with the [Ru(bpy)(dcbpy)(H2O)2]2+-doped MIL-126 Fe-based MOF. We also demonstrated the long-term durability of Ru-doped Ce-MOFs for photoelectrocatalytic water oxidation under acidic conditions. The as-synthesized MOFs were analyzed with powder X-ray diffraction (PXRD), Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), UV-visible diffuse reflectance spectroscopy, scanning electron microscopy (SEM), and electric conductivity measurements. This study contributes to the development of cost-effective materials for sustainable photocatalytic water splitting processes.

Self-Cascade Ce-MOF-818 Nanozyme for Sequential Hydrolysis and Oxidation

Mimicking efficient biocatalytic cascades using nanozymes has gained enormous attention in catalytic chemistry, but it remains challenging to develop a nanozyme-based cascade system to sequentially perform the desired reactions. Particularly, the integration of sequential hydrolysis and oxidation reactions into nanozyme-based cascade systems has not yet been achieved, despite their significant roles in various domains. Herein, a self-cascade Ce-MOF-818 nanozyme for sequential hydrolysis and oxidation reactions is developed. Ce-MOF-818 is the first Ce(IV)-based heterometallic metal-organic framework constructed through the coordination of Ce and Cu to distinct groups. It is successfully synthesized using an improved solvothermal method, overcoming the challenge posed by the significant difference in the binding speeds of Ce and Cu to ligands. With excellent organophosphate hydrolase-like (Km = 42.3 µM, Kcat = 0.0208 min-1 ) and catechol oxidase-like (Km = 2589 µM, Kcat = 1.25 s-1 ) activities attributed to its bimetallic active centers, Ce-MOF-818 serves as a promising self-cascade platform for sequential hydrolysis and oxidation. Notably, its catalytic efficiency surpasses that of physically mixed nanozymes by approximately fourfold, owning to the close integration of active sites. The developed hydrolysis-oxidation self-cascade nanozyme has promising potential applications in catalytic chemistry and provides valuable insights into the rational design of nanozyme-based cascade systems.

Bimetallic metal organic framework/Ni doped ZnO nanomaterials modified carbon paste electrode for selective electrochemical determination of ciprofloxacin

In this work, an efficient and sensitive electrochemical sensor for the determination of ciprofloxacin (CIP) is reported. The sensor was prepared by using a carbon paste electrode (CPE) modified with a combination of bimetallic copper/cerium-based metal organic framework (Cu/Ce-MOF) and nickel doped zinc oxide nanoparticles (NZP). The modifiers were characterized by Brunauer-Emmett-Teller (BET) analysis, Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), and elemental mapping analysis (EDS). The electrochemical behavior of the modified electrode was studied by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The developed electrode was employed for the detection of CIP by differential pulse voltammetry (DPV). Under optimal conditions, the anodic peak current response of the electrode was linearly correlated with CIP concentration in the range of 0.75-100 μmol L-1 with a sensitivity of 1.29 μA μmol-1 L-1. The limit of detection and reproducibility of the method were 0.142 μmol L-1 and 2.7%, respectively. The developed sensor showed good selectivity to CIP against possible interferents. The method was applied to determine CIP in water, milk and urine samples. The results indicated that this method has potential to be applied in the analysis of residue CIP in complex matrices with high selectivity, and good reproducibility.

Discovery and In Situ Crystallization Studies of Cerium-Based Metal-Organic Frameworks with V-Shaped Linker Molecules

We report the discovery and characterization of two porous Ce(III)-based metal-organic frameworks (MOFs) with the V-shaped linker molecules 4,4'-sulfonyldibenzoate (SDB2-) and 4,4'-(hexafluoroisopropylidene)bis(benzoate) (hfipbb2-). The compounds of framework composition [Ce2(H2O)(SDB)3] (1) and [Ce2(hfipbb)3] (2) were obtained by using a synthetic approach in acetonitrile that we recently established. Structure determination of 1 was accomplished from 3D electron diffraction (3D ED) data, while 2 could be refined against powder X-ray diffraction (PXRD) data using the crystal structure of an isostructural La-MOF as the starting model. Their framework structures consist of chain-like inorganic building units (IBUs) or hybrid-BUs that are interconnected by the V-shaped linker molecules to form framework structures with channel-type pores. The composition of both compounds was confirmed by PXRD, elemental analysis, as well as NMR and IR spectroscopy. Interestingly, despite the use of (NH4)2[CeIV(NO3)6] in the synthesis, cerium ions in both MOFs occur exclusively in the + III oxidation state as determined by X-ray absorption near edge structure (XANES) and X-ray photoelectron spectroscopy (XPS). Thermal analyses reveal remarkably high thermal stabilities of ≥400 °C for the MOFs. Initial N2 sorption measurements revealed the peculiar sorption behavior of 2 which prompted a deeper investigation by Ar and CO2 sorption experiments. The combination with nonlocal density functional theory (NL-DFT) calculations adds to the understanding of the nature of the different pore diameters in 2. An extensive quasi-simultaneous in situ XANES/XRD investigation was carried out to unveil the formation of Ce-MOFs during the solvothermal syntheses in acetonitrile. The crystallization of the two Ce(III)-MOFs presented herein as well as two previously reported Ce(IV)-MOFs, all obtained by a similar synthetic approach, were studied. While the XRD patterns show time-dependent MOF crystallization, the XANES data reveal the presence of Ce(III) intermediates and their subsequent conversion to the MOFs. The addition of acetic acid in combination with the V-shaped linker molecule was identified as the crucial factor for the formation of the crystalline Ce(III/IV)-MOFs.

Tuning the Cerium-Based Metal-Organic Framework Formation by Template Effect and Precursor Selection

The novel metal-organic framework [(CH3)2NH2]2[Ce2(bdc)4(DMF)2]·2H2O (Ce-MOF, H2bdc-terephthalic acid, DMF-N,N-dimethylformamide) was synthesized by a simple solvothermal method. Ce-MOF has 3D connectivity of bcu type with a dinuclear fragment connected with eight neighbors, while three types of guest species are residing in its pores: water, DMF, and dimethylammonium cations. Dimethylamine was demonstrated to have a decisive templating effect on the formation of Ce-MOF, as its deliberate addition to the solvothermal reaction allows the reproducible synthesis of the new framework. Otherwise, the previously reported MOF Ce5(bdc)7.5(DMF)4 (Ce5) or its composite with nano-CeO2 (CeO2@Ce5) was obtained. Various Ce carboxylate precursors and synthetic conditions were explored to evidence the major stability of Ce-MOF and Ce5 within the Ce carboxylate-H2bdc-DMF system. The choice of precursor impacts the surface area of Ce-MOF and thus its reactivity in an oxidative atmosphere. The in situ PXRD and TG-DTA-MS study of Ce-MOF in a nonoxidative atmosphere demonstrates that it eliminates H2O and DMF along with (CH3)2NH guest species in two distinct stages at 70 and 250 °C, respectively, yielding [Ce2(bdc)3(H2bdc)]. The H2bdc molecule is removed at 350 °C with the formation of novel modification of Ce2(bdc)3, which is stable at least up to 450 °C. According to the total X-ray scattering study with pair distribution function analysis, the most pronounced local structure transformation occurs upon departure of DMF and (CH3)2NH guest species, which is in line with the in situ PXRD experiment. In an oxidative atmosphere, Ce-MOF undergoes combustion to CeO2 at a temperature as low as 390 °C. MOF-derived CeO2 from Ce-MOF, Ce5, and CeO2@Ce5 exhibits catalytic activity in the CO oxidation reaction.

Efficient Exciton Dissociation on Ceria Chelated Cerium-Based MOF Isogenous S-Scheme Photocatalyst for Acetaldehyde Purification

Long-term exposure to low concentration indoor VOCs of acetaldehyde (CH3 CHO) is harmful to human health. Thus, a novel isogenous heterojunction CeO2 /Ce-MOF photocatalyst is synthesized via a one-step hydrothermal method for the effective elimination of CH3 CHO in this work. This CeO2 /Ce-MOF photocatalyst performs well in CH3 CHO removal and achieves an apparent quantum efficiency of 7.15% at 420 nm, which presents ≈6.7 and 3.4 times superior to those generated by CeO2 and Ce-MOF, respectively. The enhanced efficiency is due to two main aspects including i) an effective photocarrier separation ability and the prolonged reaction lifetime of excitons play crucial roles and ii) the formation of an internal electric field (IEF) is sufficient to overcome the considerable exciton binding energy, and increases the exciton dissociation efficiency by up to 50.4%. Moreover, the reasonable pathways and mechanisms of CH3 CHO degradation are determined by in situ DRIFTS analysis and simulated DFT calculations. Those results demonstrated that S-scheme heterojunction successfully increases the efficiency of harmful volatile organic compounds elimination, and it offers essential guidance for designing rare earth-based MOF photocatalysts.

Aggregation behaviour of pyrene-based luminescent materials, from molecular design and optical properties to application

Molecular aggregates are self-assembled from multiple molecules via weak intermolecular interactions, and new chemical and physical properties can emerge compared to their individual molecule. With the development of aggregate science, much research has focused on the study of the luminescence behaviour of aggregates rather than single molecules. Pyrene as a classical fluorophore has attracted great attention due to its diverse luminescence behavior depending on the solution state, molecular packing pattern as well as morphology, resulting in wide potential applications. For example, pyrene prefers to emit monomer emission in dilute solution but tends to form a dimer via π-π stacking in the aggregation state, resulting in red-shifted emission with quenched fluorescence and quantum yield. Over the past two decades, much effort has been devoted to developing novel pyrene-based fluorescent molecules and determining the luminescence mechanism for potential applications. Since the concept of "aggregation-induced emission (AIE)" was proposed by Tang et al. in 2001, aggregate science has been established, and the aggregated luminescence behaviour of pyrene-based materials has been extensively investigated. New pyrene-based emitters have been designed and synthesized not only to investigate the relationships between the molecular structure and properties and advanced applications but also to examine the effect of the aggregate morphology on their optical and electronic properties. Indeed, new aggregated pyrene-based molecules have emerged with unique properties, such as circularly polarized luminescence, excellent fluorescence and phosphorescence and electroluminescence, ultra-high mobility, etc. These properties are independent of their molecular constituents and allow for a number of cutting-edge technological applications, such as chemosensors, organic light-emitting diodes, organic field effect transistors, organic solar cells, Li-batteries, etc. Reviews published to-date have mainly concentrated on summarizing the molecular design and multi-functional applications of pyrene-based fluorophores, whereas the aggregation behaviour of pyrene-based luminescent materials has received very little attention. The majority of the multi-functional applications of pyrene molecules are not only closely related to their molecular structures, but also to the packing model they adopt in the aggregated state. In this review, we will summarize the intriguing optoelectronic properties of pyrene-based luminescent materials boosted by aggregation behaviour, and systematically establish the relationship between the molecular structure, aggregation states, and optoelectronic properties. This review will provide a new perspective for understanding the luminescence and electronic transition mechanism of pyrene-based materials and will facilitate further development of pyrene chemistry.

Rapid synthesis of cerium-UiO-66 MOF nanoparticles for photocatalytic dye degradation

An unprecedented synthesis method is used to form a series of Ce-UiO-66-X (X = NH2, OH, H, NO2, COOH) metal-organic frameworks by precipitation from mixed solvents, with instantaneous crystallisation on combining separate solutions of ligands and metal precursors. This allows the first direct synthesis of Ce-UiO-66-OH. Powder X-ray diffraction (PXRD) shows that all materials are pure phase with a broadened profile that indicates nano-scale crystallite domain size. The effect of different functional groups on the benzene-1,4-dicarboxylate linker within the UiO-66 structure has been investigated on degradation of two cationic (methylene blue and rhodamine B) and two anionic (Congo red, and Alizarin red S) dyes under UV and visible light irradiation at room temperature. Analysis of the dye adsorption in the absence of light is accounted for using pseudo-first order kinetics, and the Ce-UiO-66-NH2, Ce-UiO-66-OH, and Ce-UiO-66-H materials display a considerable photocatalytic activity to degrade Alizarin red S and Congo red rapidly between 1 and 3 minutes. The materials show excellent photostability and recyclability under UV and visible light, with no loss of crystallinity seen by PXRD and activity maintained over 5 cycles, with 16 hours photostability for Ce-UiO-66-NH2.

Ce(IV)-Based Metal-Organic Gel for Ultrafast Removal of Trace Arsenate from Water

As a potential replacement for metal-organic frameworks (MOFs), constructing metal-organic gels (MOGs) is an appealing but challenging topic since MOGs are a kind of shapeable MOF gels. Also, the rapid adsorption of trace heavy metal ions in aqueous media remains a serious challenge. Herein, a simple strategy for the synthesis of Ce(IV)-based metal-organic gel (Ce-MOG) was first developed for the rapid adsorption of trace As(V). The (NH₄)₂Ce(NO₃)₆ obtains hydroxide bridges after adding apposite NaOH, leading to [Ce₆O₄(OH)₄]¹²⁺ clustering and inducing fast and excessive nucleation rates, which also leads to coordination disturbance of MOF nanocrystals to obtain Ce-MOG. The Ce-OH groups are the key to gel formation through hydrogen bonding and are the active site for the ultrafast adsorption of As(V). As expected, the resultant Ce-MOG has an excellent adsorption rate, making it possible to effectively decontaminate 500 ppb of As(V) to below the World Health Organization (WHO) recommended threshold for drinking water (10 ppb) within 1 min. It achieves equilibrium adsorption in 10 min, and the final arsenate-removing efficiency reaches 99.8%. For Ce-MOF, the effluent concentration of As(V) is higher than the drinking water standard, while equilibrium adsorption takes 60 min. The initial adsorption rate of Ce-MOG, h(k₂q_e²) is calculated and indicated to be 67.67 mg g^-1 min^-1, about 19.96 times that of Ce-MOF (3.39 mg g^-1 min^-1). As such, the excellent As(V) decontamination rate, selectivity, and reusability of Ce-MOG indicate its great potential for practical drinking water purification.

Engineering Dynamic Defect of CeIII /CeIV -Based Metal-Organic Framework through Ultrasound-Triggered Au Electron Trapper for Sonodynamic Therapy of Osteomyelitis

Defect engineering is an important way to tune the catalytic properties of metal-organic framework (MOF), yet precise control of defects is difficult to achieve. Herein, a cerium-based MOF (CeTCPP) is decorated with Au nanoparticles. Under ultrasound irradiation, Au nanoparticles can precisely turn 1/3 of the pristine Ce³⁺ nodes into Ce⁴⁺ . With the stable existence of Ce⁴⁺ , the coordination of Ce nodes changed, causing the structural irregularity in CeTCPP-Au, so that the electron-hole recombination is obviously hindered, facilitating the generation of reactive oxygen species. Therefore, under 20 min of ultrasound irradiation, the CeTCPP-Au showed superior antibacterial efficacy of over 99% against Staphylococcus aureus and Escherichia coli with good biocompatibility, which is further used for effective therapy of osteomyelitis. Overall, this work provides a dynamic defect formation strategy of MOF through the electron trapping of Au nanoparticles, which also sheds light on sonodynamic therapy in curing deep-seated lesions.

Fenton-like Cerium Metal–Organic Frameworks (Ce-MOFs) for Catalytic Oxidation of Olefins, Alcohol, and Dyes Degradation

A metal–organic framework (MOF) of cerium (Ce) ions and 4,4′,4′′-nitrilotribenzoic acid linker was synthesized via a hydrothermal method. Ce-MOF consists of a Lewis acid moiety, i.e. Ce3+ and triphenylamine cores. It showed Fenton-like properties with excellent catalytic oxidation activity for olefins, primary/secondary alcohols, and water pollutants e.g., organic dyes. It displayed high oxidation conversion of cinnamyl alcohol and styrene of 100% and 53%, respectively. It offered good selectivity towards styrene oxide and benzaldehyde (i.e. 75% and 100%, respectively). It was applied for the oxidative degradation of dyes e.g. rhodamine B (RhB), methyl blue (MeB), Congo red (CR), and direct blue (DB) using hydrogen peroxide (H2O2) as an oxidant. It exhibited high efficiency in the oxidative degradation of these water pollutants. The mechanistic study of oxidation involves the formation of radical hydroxyl (•OH) species. This study revealed the possibility of enhancing the oxidative catalytic performance, including oxidative degradation of organic pollutants, by employing advanced oxidation processes (AOPs) using Ce-MOF. The catalyst is recyclable five times without significantly decreasing of the material’s catalytic performance.

Room temperature design of Ce(iv)-MOFs: from photocatalytic HER and OER to overall water splitting under simulated sunlight irradiation

A new synthetic approach is reported to synthesize redox-active Ce(iv) MOFs at room temperature for efficient and reusable photo-induced overall water splitting.

Design of Monovalent Cerium-Based Metal Organic Frameworks as Bioinspired Superoxide Dismutase Mimics for Ionizing Radiation Protection

Superoxide dismutase (SOD) is one of the major antioxidants in vivo and is expected to play critical roles on the defense against reactive oxygen species (ROS)-mediated damages, such as ionizing radiation damages. Herein, inspired by the function and structure of natural SODs and cerium oxide nanozymes, two monovalent cerium-based metal organic frameworks (Ce-MOFs), Ce^IIIBTC and Ce^IVBTC, were designed for superoxide radical (O₂^•-) elimination and ionizing radiation protection. These two Ce-MOFs selectively scavenge O₂^•- and are excellent SOD mimics. Like natural SODs and cerium oxide nanozymes, the SOD-like catalytic mechanism of Ce-MOFs involves a cycle between Ce(IV) and Ce(III). Furthermore, by constructing monovalent Ce-MOFs, we found that high-valent Ce^IVBTC are more effective SOD-like nanozymes compared to Ce^IIIBTC. With smaller size, better monodispersity, and more effective SOD-like activity, Ce^IVBTC nanozymes were further applied for ionizing radiation protection. Both in vitro and in vivo results demonstrated that Ce^IVBTC nanozymes could efficiently scavenge ROS, prevent cells from γ-ray radiation-induced cell viability decrease and DNA damages, and improve the survival rate of irradiated mice by recovering the bone marrow DNA damage and alleviating oxidative stress of tissues. The protective effect and good biocompatibility of Ce^IVBTC nanozymes will enable the development of Ce-MOFs-based radioprotectants and facilitate treatment of other ROS-related diseases.

Tuning the structure of cerium-based metal-organic frameworks for efficient removal of arsenic species: The role of organic ligands

The ability of organic ligands to change the structure of metal-organic frameworks (MOFs) in nature and influence their adsorption efficiency for arsenic species is enormous. The current work was designed to investigate the adsorption performance of cerium-based MOFs with tunable structures through the use of organic ligands (Ce-MOF-66 and Ce-MOF-808) towards arsenic species from water. The structural features of Ce-MOF-66 and Ce-MOF-808 with varying crystallinity, morphology, particle size, and surface area are considerably altered by organic ligands tuning, resulting in clearly distinct arsenate (As (V)) and arsenite (As (III)) adsorption capabilities. The experimental results showed that the Langmuir adsorption capacities of As (V) by Ce-MOF-66 and Ce-MOF-808 reached 355.67 and 217.80 mg/g, respectively, while for As (III) were 5.52 and 402.10 mg/g for Ce-MOF-66 and Ce-MOF-808, respectively. Except for the impact of PO₄^3- on As (V), co-existing ions had no significant influence on adsorption, illustrating the high selectivity. Furthermore, to understand the structure and adsorption mechanism, two adsorbents were characterized by powder X-ray diffraction, scanning electron microscopy, thermogravimetric analysis, specific surface area, Fourier transform infrared and X-ray photoelectron spectroscopy, in which identified that unsaturated sites and ligand exchange were the main adsorption mechanisms of As (V) and As (III). Overall, this research presents a novel approach for developing high-performance Ce-derived MOFs adsorbents to capture arsenic species.

Hierarchical large-pore MOFs templated from poly(ethylene oxide)-b-polystyrene diblock copolymer with tuneable pore sizes

Diblock copolymer poly(ethylene oxide)-b-poly(styrene) (PEO-b-PS) was adopted to template the synthesis of hierarchically porous Ce-based metal-organic frameworks (MOFs) for the first time. By extending the synergistic effect of Hofmeister ions and soft templates into the water-rich system, UiO-66 type Ce-MOFs with a mesopore size of about 15 nm were achieved. Mesopore size could be further tuned up to approximately 23 nm upon introducing 1,3,5-trimethylbenzene to the micelle core of PEO-b-PS.

The role of MOF based nanocomposites in the detection of phenolic compounds for environmental remediation- A review

Phenolic compounds would be the emerging pollutant by 2050, because of their wide spread applicability in daily life and therefore the adoption of suitable detection methods in which identification and separation of isomers is highly desirable. Owing to the fascinating features, Metal-organic framework (MOF), a class of reticular materials holds a large surface area with tunable shape and adjustable porosity will provide strong interaction with analytes through abundant functional groups resulting in high selectivity towards electrochemical determination of phenolic isomers. Nevertheless, the sensing performance can still be further improved by building MOF network (intrinsic resistance) with functional (conducting) materials, resulting in MOF based nanocomposite. Herein, this review provides the summary of MOF based nanocomposites for electrochemical sensing of phenolic compounds developed from 2015. In this review, we discussed the demerits of pristine MOF as electrode materials, and the requirement of new class of MOF with functional materials such as nanomaterials, carbon nanotubes, graphene and MXene. The history and evolution of MOF nanocomposite-based materials are discussed and also featured the impressive physical and chemical properties. Besides this review discusses the factors influencing the conducting pathway and mass transport of MOF based nanocomposite for enhanced sensing performance of phenolic compounds with suitable mechanistic illustrations. Finally, the major challenges governing the determination of phenolic compounds and the future advancements required for the development of MOF based electrodes for various applications are highlighted.

Probing the electronic and ionic transport in topologically distinct redox-active metal-organic frameworks in aqueous electrolytes

Three topologically distinct zirconium-based metal-organic frameworks (Zr-MOFs) constructed from redox-innocent linkers, MOF-808, defective UiO-66, and CAU-24, are synthesized, and the spatially dispersed redox-active manganese sites are post-synthetically immobilized on the hexa-zirconium nodes of these Zr-MOFs. The crystallinity, morphology, porosity, manganese loading, and bulk electrical conductivity of each material are studied. The redox-hopping-based electrochemical reaction between the installed Mn(III) and Mn(IV) occurring within the thin films of these MOFs in aqueous electrolytes is investigated, in the presence of various concentrations of Na₂SO₄ in the electrolytes. Cyclic voltammetry is used to qualitatively study the redox-hopping process, and chronoamperometry is used to quantify the electrochemically active fractions of manganese sites within the MOF thin film as well as the values of apparent diffusivity for the redox-hopping process. By adjusting the concentration of Na₂SO₄ in the electrolyte, the rate-determining step for the redox-hopping process can be tuned from ionic transport to electronic transport, and the Mn-decorated MOF-808, which possesses the largest pore size, can achieve the highest value of apparent diffusivity. Findings here shed light on the selection of Zr-MOF as well as the choice of electrolyte concentration for the applications of MOFs in supercapacitors and electrocatalysis relying on such redox-hopping processes in aqueous electrolytes.

A Novel Cerium(IV)-Based Metal-Organic Framework for CO2 Chemical Fixation and Photocatalytic Overall Water Splitting

Cerium (IV)-based metal-organic frameworks (MOFs) are highly desirable due to their unique potential in fields such as redox catalysis and photocatalysis. However, due to the high reduction potential of Ce^IV species in solution, it is still a great challenge to synthesize Ce^IV -MOFs with novel structures, which are extremely dominated by the hexanuclear Ce-O cluster inorganic building units (IBUs). Herein, a Ce-O IBU chain containing Ce^IV -MOF, CSUST-3 (CSUST: Changsha University of Science and Technology), was successfully prepared using the kinetic stabilization study of UiO-66(Ce)-NDC (H₂ NDC=2,6-naphthalenedicarboxylic acid). Furthermore, owing to the superior redox activity, Lewis acidity and semiconductor-like behavior owing to Ce⁴⁺ , activated CSUST-3 was demonstrated to be an excellent catalyst for CO₂ chemical fixation. One-pot synthesis of styrene carbonate from styrene and CO₂ was achieved under mild conditions (1 atm CO₂ , 80 °C, and solvent free). Moreover, activated CSUST-3 was shown to be a remarkable co-catalyst-free photocatalyst for overall water splitting (OWS), rendering 59 μmol g^-1  h^-1 of H₂ and 22 μmol g^-1  h^-1 of O₂ under simulated sunlight irradiation (Na₂ S-Na₂ SO₃ as sacrificial agent).

MOF-enabled confinement and related effects for chemical catalyst presentation and utilization

A defining characteristic of nearly all catalytically functional MOFs is uniform, molecular-scale porosity. MOF pores, linkers and nodes that define them, help regulate reactant and product transport, catalyst siting, catalyst accessibility, catalyst stability, catalyst activity, co-catalyst proximity, composition of the chemical environment at and beyond the catalytic active site, chemical intermediate and transition-state conformations, thermodynamic affinity of molecular guests for MOF interior sites, framework charge and density of charge-compensating ions, pore hydrophobicity/hydrophilicity, pore and channel rigidity vs. flexibility, and other features and properties. Collectively and individually, these properties help define overall catalyst functional behaviour. This review focuses on how porous, catalyst-containing MOFs capitalize on molecular-scale confinement, containment, isolation, environment modulation, energy delivery, and mobility to accomplish desired chemical transformations with potentially superior selectivity or other efficacy, especially in comparison to catalysts in homogeneous solution environments.

Nitrogen and sulfur co-doped CeO2 nanorods for efficient photocatalytic VOCs degradation

Nitrogen and sulfur-co-doped ceria with a regular nanorod morphology was prepared by one-step calcination treatment. N and S dopants can generate new impurity level states and promote the photocatalytic performance of CeO2 for VOCs degradation.

Cerium versus zirconium UiO66 metal–organic frameworks coupled with CdS for H2 evolution under visible light

Metal–organic frameworks (MOFs) as highly porous photocatalysts have received increasing attention.

Highly sensitive colorimetric detection and effective adsorption of phosphate based on MOF-808(Zr/Ce)

MOF-808(Zr/Ce) has been successfully used for the sensitive and rapid detection of phosphate and phosphate removal by effective adsorption.

Exploring novel heterojunctions based on the cerium metal–organic framework family and CAU-1, as dissimilar structures, for the sake of photocatalytic activity enhancement

Ce-based metal–organic frameworks (Ce-MOFs) are excellent photocatalysts due to their high efficiency in charge transportation.

The chemistry behind room temperature synthesis of hafnium and cerium UiO-66 derivatives

RT formation of Hf and Ce UiO-66 derivatives is investigated using a one-step method where the linker and metal salt are simply combined, and a two-step method where the inorganic component is pre-heated to form metal clusters.

Atomic / Molecular Layer Deposition of Cerium (III) Hybrid Thin Films using Rigid Organic Precursors

Atomic / molecular layer deposition (ALD/MLD) process for the fabrication of cerium-based metal-organic hybrid films is demonstrated for the first time. The highly reactive cerium (III) guanidinate precursor [Ce(dpdmg)3] was...

Bimetallic Ordered Large-Pore MesoMOFs for Simultaneous Enrichment and Dephosphorylation of Phosphopeptides

Despite the fact that bimetallic metal-organic frameworks (MOFs) could afford multiple functionalities by a synergistic effect of individual metallic centers, their intrinsic microporous structure frequently restricts their wide applications with bulky molecules involved. An urgent need is consequently triggered to design bimetallic hierarchical mesoporous MOFs (mesoMOFs). Herein, Zr/Ce mesoMOFs with a uniform pore size of up to 8 nm was successfully synthesized by a copolymer template strategy with the aid of a Hoffmeister ion. The obtained Zr/Ce mesoMOFs feature high porosity, good chemical and thermal stabilities, and tunable element components, and up to 70% Zr could be incorporated into the mesoporous Ce-based framework without deteriorating its crystallinity. Thanks to the synergistic effect of inherent Ce and Zr as well as the large and open pore channels, a broad range of phosphopeptides with different molecule sizes could be effectively checked out, thanks to their simultaneous enrichment and dephosphorylation capabilities. Such an ability to efficiently concentrate phosphopeptides remained intact even in the presence of abundant non-phosphorylated species. The practical detection of phosphopeptides from human serum was also verified, prefiguring the great potentials of bimetallic large-pore mesoMOFs for the proteome applications.

Investigation of the preparation and reactivity of metal-organic frameworks of cerium and pyridine-2,4,6-tricarboxylate

The synthesis of three coordination polymers of cerium(III) and the ligand pyridine-2,4,6-tricarboxylate (PTC) is reported. Two of the materials crystallise under hydrothermal conditions at 180 °C, with [Ce(PTC)(H₂O)₂]·1.5H₂O, (1), being formed on extended periods of reaction time, 3 days or longer, and Ce(PTC)(H₂O)₃, (2), crystallising after 1 day. Both phases contain Ce(III) but are prepared using the Ce(IV) salt Ce(SO₄)₂·4H₂O as reagent. Under solvothermal conditions (mixed water-N,N-dimethylformamide (DMF)), the phase [Ce(PTC)(H₂O)(DMF)]·H₂O (3) is crystallised. The structures of the three materials are resolved by single crystal X-ray diffraction, with the phase purity of the samples determined by powder X-ray diffraction and thermogravimetric analysis. (1) is constructed from helical chains cross-linked by the PTC linkers to give a three-dimensional structure that contains clusters of water molecules in channels that are hydrogen-bonded to each other and to additional waters that are coordinated to cerium. (2) also contains nine-coordinate cerium but these are linked to give a dense framework, in which water is directly coordinated to cerium. (3) contains corner-shared nine-coordinate cerium centres, linked to give a framework in which Ce-coordinated DMF fills space. Upon heating the material (1) in air all water is irreversibly lost to give a poorly crystalline anhydrous phase Ce(PTC), as deduced from X-ray thermodiffractometry and thermogravimetric analysis. The material (1), however, is hydrothermally stable, and is also stable under oxidising conditions, where immersion in 30% H₂O₂ gives no loss in crystallinity. Oxidation of around 50% of surface Ce to the +4 oxidation state is thus possible, as evidenced by X-ray photoelectron spectroscopy, which is accompanied by a colour change from yellow to orange. Photocatalytic activity of (1) is screened and the material shows effective degradation of methyl orange.

Proton-Conductive Cerium-Based Metal-Organic Frameworks

In this study, proton-conducting behaviors of a cerium-based metal-organic framework (MOF), Ce-MOF-808, its zirconium-based isostructural MOF, and bimetallic MOFs with various Zr-to-Ce ratios are investigated. The significantly increased proton conductivity (σ) and decreased activation energy (E_a) are obtained by substituting Zr with Ce in the nodes of MOF-808. Ce-MOF-808 achieves a σ of 4.4 × 10^-3 S/cm at 25 °C under 99% relative humidity and an E_a of 0.14 eV; this value is among the lowest-reported E_a of proton-conductive MOFs. Density functional theory calculations are utilized to probe the proton affinities of these MOFs. As the first study reporting the proton conduction in cerium-based MOFs, the finding here suggests that cerium-based MOFs should be a better platform for the design of proton conductors compared to the commonly reported zirconium-based MOFs in future studies on energy-related applications.

Group 4 Metal-Based Metal—Organic Frameworks for Chemical Sensors

Metal-organic frameworks (MOFs) have attracted great attention for their applications in chemical sensors mainly due to their high porosity resulting in high density of spatially accessible active sites, which can interact with the aimed analyte. Among various MOFs, frameworks constructed from group 4 metal-based (e.g., zirconium, titanium, hafnium, and cerium) MOFs, have become especially of interest for the sensors requiring the operations in aqueous media owing to their remarkable chemical stability in water. Research efforts have been made to utilize these group 4 metal-based MOFs in chemosensors such as luminescent sensors, colorimetric sensors, electrochemical sensors, and resistive sensors for a range of analytes since 2013. Though several studies in this subfield have been published especially over the past 3–5 years, some challenges and concerns are still there and sometimes they might be overlooked. In this review, we aim to highlight the recent progress in the use of group 4 metal-based MOFs in chemical sensors, and focus on the challenges, potential concerns, and opportunities in future studies regarding the developments of such chemically robust MOFs for sensing applications.

Cerium-Based Metal-Organic Framework Nanocrystals Interconnected by Carbon Nanotubes for Boosting Electrochemical Capacitor Performance

In this study, nanocrystals of a cerium-based metal-organic framework (Ce-MOF), Ce-MOF-808, are directly grown on the surface of carboxylic acid-functionalized carbon nanotubes (CNTs) by a facile one-step solvothermal synthesis method. Ce-MOF-CNT nanocomposites with various Ce-MOF-to-CNT ratios are synthesized, and their crystallinity, morphology, porosity, and electrical conductivity are examined. The redox-hopping and electrochemical behaviors of the pristine Ce-MOF in aqueous electrolytes are investigated, suggesting that the pristine Ce-MOF is electrochemically active but possesses a limited charge-transport behavior. As a demonstration, all the Ce-MOF, CNT, and nanocomposites are used as active materials for application in aqueous-based supercapacitors. The capacitive performance of the CNT can be significantly boosted with the help of redox-active Ce-MOF-808 nanocrystals.

In Situ X-ray Diffraction Investigation of the Crystallisation of Perfluorinated CeIV -Based Metal-Organic Frameworks with UiO-66 and MIL-140 Architectures*

We report on the results of an in situ synchrotron powder X-ray diffraction study of the crystallisation in aqueous medium of two recently discovered perfluorinated Ce^IV -based metal-organic frameworks (MOFs), analogues of the already well investigated Zr^IV -based UiO-66 and MIL-140A, namely, F4_UiO-66(Ce) and F4_MIL-140A(Ce). The two MOFs were originally obtained in pure form in similar conditions, using ammonium cerium nitrate and tetrafluoroterephthalic acid as reagents, and small variations of the reaction parameters were found to yield mixed phases. Here, we investigate the crystallisation of these compounds, varying parameters such as temperature, amount of the protonation modulator nitric acid and amount of the coordination modulator acetic acid. When only HNO₃ is present in the reaction environment, only F4_MIL-140A(Ce) is obtained. Heating preferentially accelerates nucleation, which becomes rate determining below 57 °C. Upon addition of AcOH to the system, alongside HNO₃ , mixed-phased products are obtained. F4_UiO-66(Ce) is always formed faster, and no interconversion between the two phases occurs. In the case of F4_UiO-66(Ce), crystal growth is always the rate-determining step. A higher amount of HNO₃ favours the formation of F4_MIL-140A(Ce), whereas increasing the amount of AcOH favours the formation of F4_UiO-66(Ce). Based on the in situ results, a new optimised route to achieving a pure, high-quality F4_MIL-140A(Ce) phase in mild conditions (60 °C, 1 h) is also identified.

Lanthanide metal–organic frameworks for catalytic oxidation of olefins

Two isostructural metal–organic frameworks (MOFs), termed Ln-MOF-589 (Ln = La, Ce), were developed for the catalytic oxidation of olefins.