Dendrite-free Zn anodes enabled by functional nitrogen-doped carbon protective layers for aqueous zinc-ion batteries

Towards Superior Aqueous Zinc-Ion Batteries: The Insights of Artificial Protective Interfaces

Aqueous zinc ion batteries (AZIBs) with metallic Zn anode have the potential for large-scale energy storage application due to their cost-effectiveness, safety, environmental-friendliness, and ease of preparation. However, the concerns regarding dendrite growth and side reactions on Zn anode surface hamper the commercialization of AZIBs. This review aims to give a comprehensive evaluation of the protective interphase construction and provide guidance to further improve the electrochemical performance of AZIBs. The failure behaviors of the Zn metal anode including dendrite growth, corrosion, and hydrogen evolution are analyzed. Then, the applications and mechanisms of the constructed interphases are introduced, which are classified by the material species. The fabrication methods of the artificial interfaces are summarized and evaluated, including the in-situ strategy and ex-situ strategy. Finally, the characterization means are discussed to give a full view for the study of Zn anode protection. Based on the analysis of this review, a stable and high-performance Zn anode could be designed by carefully choosing applied material, corresponding protective mechanism, and appropriate construction technique. Additionally, this review for Zn anode modification and construction techniques for anode protection in AZIBs may be helpful in other aqueous metal batteries with similar problems.

Achieving Long Cycle Life of Zn-Ion Batteries through Three-Dimensional Copper Foam

Metallic zinc anodes in aqueous zinc-ion batteries (ZIBs) suffer from dendritic growth, low Coulombic efficiency, and high polarization during cycling. To mitigate these challenges, current collectors based on three-dimensional (3D) commercial copper foam (CCuF) are generally preferred. However, their utilization is constrained by their thickness, low electroactive surface area, and increased manufacturing expenses. In this study, the synthesis of cost-effective current collectors with exceptionally large surface areas designed for ZIBs that can be cycled hundreds of times is reported. A zinc-coated CuF anode (Zn/CuF) was prepared with a 3D porous CuF current collector produced by the dynamic hydrogen bubble template (DHBT) method. Electrochemically generated copper foam could be obtained within seconds while offering a thickness as low as 30-40 μm (CuF5 achieved a thickness of ∼38 μm in 5 s) via the DHBT method. The excellent electrical conductivity and open pore structure of the 3D porous copper scaffold ensured the uniform deposition/stripping of Zn during cycling. During the 500 h Zn deposition/stripping process, the as-synthesized CuF5 current collector offered fast electrochemical kinetics and low polarization as well as a relatively high average Coulombic efficiency of 99% (at a current density of 5 mA cm-2 and a capacity of 1 mAh cm-2). Furthermore, the symmetric cell exhibited low voltage polarization and a stable voltage profile for 1000 h at a current density of 0.1 mA cm-2. In addition, full cells containing the Zn/CuF anode coupled with an as-synthesized α-MnO2 nanoneedle cathode in aqueous electrolyte were also prepared. Capacities of 266 mAh g-1 at 0.1 A g-1 and 94 mAh g-1 at 2 A g-1 were achieved after 200 charge/discharge cycles with a stable Coulombic efficiency value close to 99.9%.

Highly stable and reversible Zn anodes enabled by an electrolyte additive of sucrose

Aqueous zinc-ion batteries (ZIBs) are one of the most promising candidates for electric energy storage devices due to their merits of low cost and high safety. However, the notorious side reactions and dendrite formation on zinc anodes impede the commercialization of ZIBs. In this work, a cheap and edible electrolyte additive sucrose is applied to address the above issues. Sucrose with hydroxyl groups can react as zincophilic sites to adsorb Zn2+. As verified by Raman and FT-IR spectroscopy, the solvation structure of Zn2+ and the hydrogen bonds can be regulated by the sucrose molecule. The weakened solvated structure of Zn2+ and lowered coupling degree between Zn2+ and SO42- can inhibit the hydrogen evolution reaction (HER) and the generation of the sulfate by-product. Furthermore, a solid electrolyte interphase (SEI)-like ion buffer layer is formed because of the preferentially adsorbed sucrose, which can increase the nucleation overpotential and equalize the ion distribution. The enriched Zn nucleation sites and inhibited 2D diffusion of Zn2+ resulting from the sucrose additive enable uniform Zn deposition. Thus, improved performances of symmetric Zn||Zn, asymmetric Zn||Cu and Zn||VO2 cells are realized. The Zn||Zn cell exhibits a highly reversible cycling performance for 1200 h and 400 h at 5 mA cm-2/1 mA h cm-2 and 10 mA cm-2/5 mA h cm-2, respectively. This work provides a readily available and edible additive to improve the performance of ZIBs.

Li, Na, K, Mg, Zn, Al, and Ca Anode Interface Chemistries Developed by Solid-State Electrolytes

Solid-state batteries (SSBs) have received significant attention due to their high energy density, reversible cycle life, and safe operations relative to commercial Li-ion batteries using flammable liquid electrolytes. This review presents the fundamentals, structures, thermodynamics, chemistries, and electrochemical kinetics of desirable solid electrolyte interphase (SEI) required to meet the practical requirements of reversible anodes. Theoretical and experimental insights for metal nucleation, deposition, and stripping for the reversible cycling of metal anodes are provided. Ion transport mechanisms and state-of-the-art solid-state electrolytes (SEs) are discussed for realizing high-performance cells. The interface challenges and strategies are also concerned with the integration of SEs, anodes, and cathodes for large-scale SSBs in terms of physical/chemical contacts, space-charge layer, interdiffusion, lattice-mismatch, dendritic growth, chemical reactivity of SEI, current collectors, and thermal instability. The recent innovations for anode interface chemistries developed by SEs are highlighted with monovalent (lithium (Li+ ), sodium (Na+ ), potassium (K+ )) and multivalent (magnesium (Mg2+ ), zinc (Zn2+ ), aluminum (Al3+ ), calcium (Ca2+ )) cation carriers (i.e., lithium-metal, lithium-sulfur, sodium-metal, potassium-ion, magnesium-ion, zinc-metal, aluminum-ion, and calcium-ion batteries) compared to those of liquid counterparts.

Adjusting zinc deposition behaviors by a modified separator to acquire zinc anodes for aqueous rechargeable zinc-ion batteries

Aqueous rechargeable zinc ion batteries (ARZIBs) are ideal for massive and longstanding energy storage applications because of their excellent security and low operation cost. Nevertheless, ARZIBs are subject to the severe corrosion reaction of zinc metal anodes that is derived from the thermodynamic unsteadiness of the zinc anodes in aqueous solution, as well as zinc dendrite growth originating from uncontrolled zinc deposition. Herein, we created a separator by coating a thin piece of polypropylene (PP) with a compound consisting of zinc trifluoromethanesulfonate [Zn(OTf)2] and poly(vinylidene fluoride-hexafluoropropylene (PVDF-HFP). Consequently, the severe corrosion reaction of the zinc metal anodes and the profuse formation of zinc dendrites were effectively mitigated by the novel PP separator, which prolonged the lifetime of the zinc metal anodes. When a zinc metal plating layer was used with preferential (002) crystallographic orientation, the cyclic performance over 1100 h of the symmetrical Zn∥Zn battery based on the novel separator was steady. Additionally, the Zn∥MnO2 batteries exhibited an impressive specific capacity and competitive long durability of 75.5% over 500 cycles at a current density of 0.1 A g-1. With this work, we intend to set the standard for designing novel separators in the construction of advanced zinc anodes for high-performance ARZIBs.

Zn and N co-doped three-dimensional honeycomb-like carbon featured with interconnected nano-pools for dendrite-free zinc anode

The zinc-ion battery (ZIB) has been extensively researched as one of the promising electrochemical power sources. However, the problem of Zn-dendrite formation during repeated plating and stripping process seriously hinders the development of ZIBs. Herein, three-dimensional (3D) honeycomb-like porous carbon (HPC) with co-doping of zinc and nitrogen is prepared through confining growth of nanoscale zeolite imidazole framework-8 (ZIF-8) on the well-designed nano-pools walls of HPC followed by pyrolysis at 600 ℃ to obtain the final product ZnN/HPC-600, which exhibits large surface area and abundant zincophilic interfaces, ensuring homogeneous distribution of electronic field and low polarization during cycling process. Importantly, ZnN/HPC-600 facilitates the uniform distribution and migration of Zn²⁺ in this nano-pools structure, avoiding the growth of dendritic Zn crystal during charging stage. The symmetric and asymmetric cells with Zn/ZnN/HPC-600 anodes are assembled, demonstrating excellent cycling reversibility, good rate performance and long-term stability. Besides, a Zn||MnO₂ full cell with Zn/ZnN/HPC-600 anode also exhibits robust cycling stability, fast reaction kinetics and almost 100 % coulombic efficiency. This work offers a novel and efficient carbonaceous nano-pools strategy to realize dendrite-free zinc anode in ZIBs.

Melamine Foam-Derived Carbon Scaffold for Dendrite-Free and Stable Zinc Metal Anode

Aqueous Zn-ion batteries (AZIBs) are one of the most promising large-scale energy storage devices due to the excellent characteristics of zinc metal anode, including high theoretical capacity, high safety and low cost. Nevertheless, the large-scale applications of AZIBs are mainly limited by uncontrollable Zn deposition and notorious Zn dendritic growth, resulting in low plating/stripping coulombic efficiency and unsatisfactory cyclic stability. To address these issues, herein, a carbon foam (CF) was fabricated via melamine-foam carbonization as a scaffold for a dendrite-free and stable Zn anode. Results showed that the abundant zincophilicity functional groups and conductive three-dimensional network of this carbon foam could effectively regulate Zn deposition and alleviate the Zn anode's volume expansion during cycling. Consequently, the symmetric cell with CF@Zn electrode exhibited lower voltage hysteresis (32.4 mV) and longer cycling performance (750 h) than the pure Zn symmetric cell at 1 mA cm^-2 and 1 mAh cm^-2. Furthermore, the full battery coupling CF@Zn anode with MnO₂ cathode can exhibit a higher initial capacity and better cyclic performance than the one with the bare Zn anode. This work brings a new idea for the design of three-dimensional (3D) current collectors for stable zinc metal anode toward high-performance AZIBs.

Inhibition of Zinc Dendrites Realized by a β-P(VDF-TrFE) Nanofiber Layer in Aqueous Zn-Ion Batteries

Uncontrollable Zn dendrite formations and parasitic side reactions on Zn electrodes induce poor cycling stability and safety issues, preventing the large-scale commercialization of Zn-ion batteries. Herein, to achieve uniform Zn deposition and suppress side reactions, an electrospun ferroelectric poly(vinylidene fluoride-co-trifluoroethylene) copolymer, a P(VDF-TrFE) nanofiber layer, is introduced as an artificial solid-electrolyte interface on a Cu substrate acting as a current collector. The aligned molecular structure of β-P(VDF-TrFE) can effectively suppress localized current density on the Cu surface, lead to uniform Zn deposition, and suppress side reactions by preventing direct contact between electrodes and aqueous electrolytes. The half-cell configuration formed by the newly fabricated electrode can achieve an average coulombic efficiency of 99.2% over 300 cycles without short-circuiting at a current density of 1 mA cm^-2 and areal capacity of 1 mAh cm^-2. Stable cycling stability is also maintained for 200 cycles at a current density of 0.5 A g^-1 in a full-cell test using MnO₂ as a cathode.

Artificial Interphase Layer for Stabilized Zn Anodes: Progress and Prospects

The burgeoning Li-ion battery is regarded as a powerful energy storage system by virtue of its high energy density. However, inescapable issues concerning safety and cost aspects retard its prospect in certain application scenarios. Accordingly, strenuous efforts have been devoted to the development of the emerging aqueous Zn-ion battery (AZIB) as an alternative to inflammable organic batteries. In particular, the instability from the anode side severely impedes the commercialization of AZIB. Constructing an artificial interphase layer (AIL) has been widely employed as an effective strategy to stabilize the Zn anode. This review specializes in the state-of-the-art of AIL design for Zn anode protection, encompassing the preparation methods, mechanism investigations, and device performances based on the classification of functional materials. To begin with, the origins of Zn instability are interpreted from the perspective of electrical field, mass transfer, and nucleation process, followed by a comprehensive summary with respect to functions of AIL and its designing criteria. In the end, current challenges and future outlooks based upon theoretical and experimental considerations are included.

Suppressing the Exacerbated Hydrogen Evolution of Porous Zn Anode with an Artificial Solid-Electrolyte Interphase Layer

Rechargeable Zn batteries are widely studied as aqueous, safe, and environmentally friendly alternatives to Li-ion batteries. The 3D porous Zn anode has been extensively reported for suppressing Zn dendrite growth and accelerating the electrode kinetics. However, we demonstrate herein that the undesirable hydrogen evolution reaction (HER) is also exacerbated for porous Zn electrode. Therefore, a polytetrafluoroethylene (PTFE) coating is further applied on the porous Zn serving as the artificial solid-electrolyte interphase (SEI), which is demonstrated to effectively inhibit the hydrogen evolution and maintain the Zn plating kinetics. By utilizing the synergistic effects of the porous morphology and artificial SEI layer, better performances are obtained over porous Zn or bare Zn foil, including dendrite-free Zn plating/stripping up to 2000 h at 2 mA cm^-2 and extended cycling in the Zn||V₂O₅ cell. This work suggests two complementary strategies for achieving simultaneously dendrite-free and side-reaction-suppressed Zn batteries.

Recent Advances of Carbon Materials in Anodes for Aqueous Zinc Ion Batteries

Carbon-based materials have been successfully applied in the zinc ion batteries to improve the energy storage capability and durability of zinc anodes. In this review, four types of carbon materials (conventional carbons, fiber-like carbons, carbon nanotubes, graphene and other 2D carbon materials) are introduced based on the electrode preparation, physicochemical property and battery performance. Several modification strategies are also illustrated, such as heteroatom doping, hierarchical design and metal/carbon composites. Besides the discussion of existing issues of zinc anodes, the structure-performance relationships are analyzed in depth. Finally, conclusive remarks of this review are summarized and prospects of the future improvement are proposed.

Improving the Performance of Aqueous Zinc-ion Batteries by Inhibiting Zinc Dendrite Growth: Recent Progress

Aqueous zinc-ion batteries (ZIBs) are promising candidates for the next-generation high-energy storage devices, owing to their resource availability, low cost, eco-friendliness, and high safety. The zinc (Zn) metal anode in a suitable battery system, including an electrolyte and a high-performance cathode electrode, can deliver an excellent electrochemical performance. However, several obstacles must be overcome to utilize aqueous ZIBs. Among these, Zn dendrite growth, corrosion, and side reactions severely impair the performance of rechargeable ZIBs. To deal with these issues, a profound understanding of the mechanism of the matter occurring in electrochemical cycles is essential to thoroughly solve the challenges. Instead of focusing solely on techniques for improving the performance of Zn metal anodes, this review delves into and summarizes the causes of side reactions and dendrite formation, thereby establishing a logical system of methodologies for improving the electrochemical performance of mild aqueous ZIBs. The correlation between the Zn metal anode, aqueous electrolyte, separators and the performance of ZIBs is also discussed in detail. There is also a brief perspective on the future development of Zn metal anodes in aqueous solutions. This study sheds a light on the challenges associated with the construction of high-performance ZIBs, which will significantly aid in their practical implementation.

Zinc Anodes Modified by One-Molecular-Thick Self-Assembled Monolayers for Simultaneous Suppression of Side-Reactions and Dendrite-Formation in Aqueous Zinc-Ion Batteries

Repeated charge/discharge in aqueous zinc-ion batteries (ZIBs) commonly results in surface corrosion/passivation and dendrite formation on zinc anodes, which is a major challenge for the commercialization of zinc-based batteries. In this work, metallic Zn modified by self-assembled monolayers is described as a viable anode for ZIBs. ω-mercaptoundecanoic acid that is spontaneously adsorbed on Zn (MUDA/Zn) contributes to the simultaneous suppression of side reactions and dendrite formation in ZIBs. Though one-molecular-thick, densely packed alkyl chains prohibit H₂ O and H⁺ from making direct contact with the underlying Zn, and surface carboxylate moieties (-COO^- ) effectively repel anionic species (OH^- ) in a solution, which renders a Zn anode inert against zincate formation within a wide range of pH. In contrast, the electrostatic attraction between surface-carboxylates and cations increases the concentration of Zn²⁺ on the surface of MUDA/Zn to facilitate Zn plating/stripping with less overpotentials. The high concentration of Zn²⁺ also results in an increased number of nucleation sites, which enhances the lateral growth of Zn with no formation of dendrites. As a result, MUDA/Zn shows excellent stability during prolonged Zn plating/stripping within a wide range of pH. The advantageous properties of MUDA/Zn are also retained in full-cells coupled with δ-MnO₂ cathodes.

Dendrites-Free Zn Metal Anodes Enabled by an Artificial Protective Layer Filled with 2D Anionic Nanosheets

Metallic zinc (Zn) has been considered to be an ideal anode material for aqueous batteries, but is impeded by the growth of Zn dendrites and its side reactions with an aqueous electrolyte. Here, it is reported that an artificial protective layer filled with novel 2D Zn²⁺ adsorbed Sb₃ P₂ O₁₄ ^3- (denoted as Zn-Sb₃ P₂ O₁₄ ) nanosheets provide an effective route to mitigate the above challenging problems. The Zn-Sb₃ P₂ O₁₄ protection layer not only avoids the direct contact with the aqueous electrolyte to suppress the side reactions but also allows for Zn-ions to pass through the protection layer rapidly. Moreover, the 2D Sb₃ P₂ O₁₄ ^3- skeleton with negative charge also confines the 2D diffusion of Zn-ion along the lateral surface of Zn anode, resulting in a uniform electron-deposition. This unique protection layer not only enables dendrite-free Zn plating/stripping with an average Coulombic efficiency of 99.2% for 200 cycles, but also sustains the symmetric Zn||Zn cell over 1300 h at 1 mA cm^-2 and 1 mAh cm^-2 as well as for 450 h at 10 mA cm^-2 and 10 mAh cm^-2 . Such advantages bring high reversibility to full Zn batteries with MnO₂ cathodes, which deliver a discharge capacity of 111.7 mAh g^-1 after 1000 cycles.

Carbon Nanomaterials With Hollow Structures: A Mini-Review

Carbon nanomaterials with high electrical conductivity, good chemical, and mechanical stability have attracted increasing attentions and shown wide applications in recent years. In particularly, hollow carbon nanomaterials, which possess ultrahigh specific surface area, large surface-to-volume ratios, and controllable pore size distribution, will benefit to provide abundant active sites, and mass loading vacancy, accelerate electron/ion transfer as well as contribute to the specific density of energy storage systems. In this mini-review, we summarize the recent progresses of hollow carbon nanomaterials by focusing on the synthesis approaches and corresponding nanostructures, including template-free and hard-template carbon hollow structures, metal organic framework-based hollow carbon structures, bowl-like and cage-like structures, as well as hollow fibers. The design and synthesis strategies of these hollow carbon nanomaterials have been systematically discussed. Finally, the emerging challenges and future prospective for developing advanced hollow carbon structures were outlined.