PFAS soil and groundwater contamination via industrial airborne emission and land deposition in SW Vermont and Eastern New York State, USA

Current trends and patterns of PFAS in agroecosystems and environment: A review

Per- and polyfluoroalkyl substances (PFASs) are one of the more well-known highly persistent organic pollutants with potential risks to agroecological systems. These compounds are of global concern due to their persistence and mobility, and they often lead to serious impacts on environmental, agricultural, and human health. In the past 20 years, the number of science publications on PFAS has risen; despite this, certain fundamental questions about PFAS occurrence, sources, mechanism of transport, and impacts on agroecosystems and the societies dependent on them are still open and evolving. There is a lack of systematic and comprehensive analysis of these concerns in agroecosystems. Therefore, we reviewed the current literature on PFAS with a focus on agroecosystems; our review suggests that PFASs are nearly ubiquitous in agricultural systems. We found the current research has limitations in analyzing PFAS in complex matrices because of their small size, distribution, and persistence within various environmental systems. There is consistency in the properties and composition of PFAS in and around agroecosystems, suggesting evidence of shared sources and similar components within different tropic levels. The introduction of new and varied sources of PFAS appear to be growing, adding to their residual accumulation in environmental matrices and leading to possible new types of chemical compounds that are difficult to assess accurately. This review determines existing research trends, understands mechanisms and incidence of PFAS within agroecosystems and their impact on human health, and thereby recommends further studies to remedy research gaps.

Emerging eco-friendly technologies for remediation of Per- and poly-fluoroalkyl substances (PFAS) in water and wastewater: A pathway to environmental sustainability

Per- and polyfluoroalkyl substances (PFAS) are rampant, toxic contaminants from anthropogenic sources, called forever chemicals for their recalcitrance. Although banned in several parts of the world for public health implications, including liver, kidney, and testicular diseases, PFAS are abundant in water sources due to easy dispersion. With chemical properties resulting from strong hydrophobic bonds, they defile many physicochemical removal methods. Though adsorption processes such as granular activated carbon (GAC) are widely used, they are marred by several limitations, including cost and secondary contamination. Thus, eco-friendly methods involving a synergy of the removal principles have been preferred for ease of use, cost-effectiveness, and near-zero effect on the environment. We present novel eco-friendly methods as the solution to PFAS remediation towards environmental sustainability. Current eco-friendly methods of PFAS removal from water sources, including electrocoagulation, membrane/filtration, adsorption, and phytoremediation methods, were highlighted, although with limitations. Novel eco-friendly methods such as microbial fuel cells, photoelectrical cells, and plasma treatment offer solutions to PFAS remediation and are quite efficient in terms of cost, result, and environmental sustainability. Overall, the successful integration of eco-friendly techniques in a seamless manner ensures the desired result. We also present a balanced position on the ecosystem impact of these ecofriendly methods, noting the successes towards environmental sustainability while exposing the gaps for further research.

Adapting to PFAS contamination of private drinking water wells near a PFAS production facility in the US Atlantic Coastal Plain of North Carolina

Perfluoroalkyl and polyfluoroalkyl substances (PFAS) are widespread groundwater contaminants and are present in over 7000 drinking water wells near a North Carolina (NC) PFAS plant (Chemours). To understand options available to affected residents, we used new and previously existing water quality data to investigate deeper aquifers as alternate drinking water supplies and compared the regulatory responses near Chemours and three other PFAS production facilities with nearby contaminated wells. Data from >100 wells show that GenX concentrations decrease with increasing depth through the four aquifers in the study area: surficial, Black Creek, Upper Cape Fear, and bedrock. This illustrates the extent of vertical PFAS penetration through the aquifer sequence following roughly 40 years of atmospheric emissions. Detailed data on 143 water quality parameters in nine deep wells (two Upper Cape Fear, seven bedrock) revealed only eight exceedances of drinking water standards (one each for arsenic, perfluorooctanoic acid [PFOA], iron, chloride, and gross alpha, and three for manganese) and nine exceedances of health advisories (all for sodium). Regulatory responses to PFAS contamination of wells in four states included mention of deeper wells as an alternate water source only for nonresidential users in NC and residential users in Vermont. The bedrock aquifer is currently used by some residents and may be a viable alternative to shallower groundwater, though arsenic treatment may be beneficial at some deep wells and long-term sustainability of the aquifer should be evaluated. PRACTITIONER POINTS: GenX concentrations decreased with increasing depth in four aquifers near a PFAS plant. A few exceedances of drinking water standards and health advisories were found in deep bedrock wells. New bedrock wells could be part of the response to PFAS issues in shallower wells. In the long term, deep bedrock wells might be a less expensive option for some residents.

Understanding the role of atmospheric deposition on the environmental load of per- and polyfluoroalkyl substances: A case study in Three Gorges Reservoir, China

Sixty-nine total suspended particle (TSP) samples, paired with forty-eight surface soil samples, covering four seasons from January 2021 to November 2021, were collected from the Three Gorges Reservoir Region (TGRR). Twenty per- and poly-fluoroalkyl substances (PFASs) were analyzed to evaluate their contamination characteristics and understand the role of atmospheric deposition on the environmental loads in TGRR. The annual average concentrations of PFASs in TSP and soil were 37.2 ± 1.22 pg·m-3 and 0.798 ± 0.134 ng·g-1, respectively. For TSP, concentrations were highest in spring and lowest in summer. For soil, it was in autumn and winter, respectively. The seasonality was more influenced by anthropogenic activities than by meteorological conditions or physicochemical parameters of the soil. Positive matrix fractionation (PMF) indicated that, based on annual averages, PFOA-based products (40.2 %) were the major sources of PFASs in TSP, followed by PFOS-based products (25.2 %) and precursor degradation (34.6 %). The highest source contributor for PFASs in spring was precursor degradation (40.9 %), while in other three seasons, it was PFOA-based products (39.9 %, 40.9 % and 52.0 %, respectively). The mean atmospheric dry and wet deposition fluxes of PFASs were estimated at 4.38 ng·m-2·day-1 and 23.5 ng·m-2·day-1, respectively. The contribution of atmospheric deposition to the inventory mass of PFASs in the surface soil was 22.3 %. These findings fill a gap in knowledge regarding the processes and mechanisms of the occurrence, sources and atmospheric deposition of PFASs in the TGRR.

Fluorine mass balance analysis in wild boar organs from the Bohemian Forest National Park

Wild boars have been reported as bioindicators for per- and polyfluoroalkyl substances (PFAS) in a variety of studies. However, data about PFAS levels in wild boars from sites with limited industrial and general human activity is scarce. In this study, wild boar (Sus scrofa) organs from the Bohemian Forest National Park (Czech Republic) were used as bioindicators for PFAS pollution. In this work, 29 livers and 24 kidneys from 30 wild boars (0.5-5 years) were investigated using a fluorine mass balance approach. For this, the samples were measured using high performance liquid chromatography with electrospray ionisation tandem mass spectrometry (HPLC-ESI-MS/MS), targeting 30 PFAS, including legacy and replacement PFAS, direct total oxidisable precursor assay (dTOPA) and combustion ion chromatography (CIC). Perfluorocarboxylic acids (PFCAs) from C7 to C14 and perfluorooctanesulfonic acid (PFOS) were detected in >50 % of samples. In the livers, PFCAs dominated the profile with median concentrations of 230 μg/kg for perfluorononanoic acid (PFNA) and 75 μg/kg perfluorooctanoic acid (PFOA). PFOA and PFNA concentrations in the livers were one order of magnitude higher than in livers from wild boars caught in rural NE Germany considered as background concentration. PFOS in liver contributed only 30 % to the Σc(PFASTarget) with a median concentration of 170 μg/kg. Kidneys and livers contain an average of 2460 μg F/kg and 6800 μg F/kg extractable organic fluorine (EOF) respectively. Σc(PFASTarget) add up to a maximum of 10 % of the extractable organic fluorine. After oxidisation of the samples, PFOA, PFNA and Σc(PFASdTOPA) increased in livers, but could not explain the EOF. The elevated concentration of PFOA and PFNA may indicate differences in biomagnification for different habitats or an unidentified PFAS source in proximity to the national park.

Rapid detection of per- and polyfluoroalkyl substances (PFAS) using paper spray-based mass spectrometry

Traditional PFAS analysis by mass spectrometry (MS) is time-consuming, as laborious sample preparation (e.g., extraction and desalting) is necessary. Herein, we report fast detection of PFAS by paper spray (PS)-based MS techniques, which employs a triangular-shaped filter paper for sample loading and ionization (≤ 3 min per sample). In this study, PS-MS was first used for direct PFAS analysis of drinking water, tap water, and wastewater. Interestingly, food package paper materials can be directly cut and examined with PS-MS for possible PFAS contamination. For samples containing salt matrices which would suppress PFAS ion signal, desalting paper spray mass spectrometry (DPS-MS), was shown to be capable of rapidly desalting, ionizing and detecting PFAS species such as per-fluorooctanoic acid (PFOA) and per-fluorosulphonic acid (PFOS). The retention of PFAS on paper substrate while salts being washed away by water is likely due to hydrophilic interaction between the PFAS polar head (e.g., carboxylic acid, sulfonic acid) with the polar filter paper cellulose surface. The DPS-MS method is highly sensitive (limits of detection:1.2-4.5 ppt) and can be applicable for directly analyzing soil extract and soil samples. These results suggest the high potential of PS-MS and the related DPS-MS technique in real-world environmental analysis of PFAS.

PFAS remediation in soil: An evaluation of carbon-based materials for contaminant sequestration

The presence of per- and poly-fluoroalkyl substances (PFAS) in soils is a global concern as these emerging contaminants are highly resistant to degradation and cause adverse effects on human and environmental health at very low concentrations. Sequestering PFAS in soils using carbon-based materials is a low-cost and effective strategy to minimize pollutant bioavailability and exposure, and may offer potential long-term remediation of PFAS in the environment. This paper provides a comprehensive evaluation of current insights on sequestration of PFAS in soil using carbon-based sorbents. Hydrophobic effects originating from fluorinated carbon (C-F) backbone "tail" and electrostatic interactions deriving from functional groups on the molecules' "head" are the two driving forces governing PFAS sorption. Consequently, varying C-F chain lengths and polar functional groups significantly alter PFAS availability and leachability. Furthermore, matrix parameters such as soil organic matter, inorganic minerals, and pH significantly impact PFAS sequestration by sorbent amendments. Materials such as activated carbon, biochar, carbon nanotubes, and their composites are the primary C-based materials used for PFAS adsorption. Importantly, modifying the carbon structural and surface chemistry is essential for increasing the active sorption sites and for strengthening interactions with PFAS. This review evaluates current literature, identifies knowledge gaps in current remediation technologies and addresses future strategies on the sequestration of PFAS in contaminated soil using sustainable novel C-based sorbents.

Application of Gaussian mixture models to quantify the upper background threshold for perfluorooctane sulfonate (PFOS) in U.S. surface soil

Studies on the occurrence and environmental distribution of per- and polyfluoroalkyl substances (PFAS) have clearly demonstrated their ubiquity in surface soil as a result of historic and ongoing emissions from various manufacturing and industrial activities worldwide. Given global efforts to characterize and mitigate risk from point source-impacted sites, there is, thus, an urgent need to quantify nonpoint source threshold concentrations (i.e., background) to support site management decisions particularly for perfluorooctane sulfonate (PFOS) as a top priority. Accordingly, this study evaluated the application of Gaussian mixture models (GMMs) fitted to log-transformed PFOS concentrations using nation-wide metadata consisting of thousands of surface soil samples representative of both background and aqueous film-forming foam (AFFF) impacts with unknown proportion. Multiple GMMs were fitted for a given number of components using different methods to account for bias associated with a marginal non-detect fraction (n = 8%) including exclusion, substitution, and imputation. Careful evaluation of the rate of change among multiple goodness-of-fit measures universally justified fitting a 2-component GMM; thus, discriminating between background and AFFF-impacted samples among the metadata. Background threshold PFOS concentrations were defined as the intersection of the probability density functions and ranged between 1.9 and 13.8 µg/kg within a broader concentration range extending up to ~ 50,000 µg/kg reflecting AFFF impacts. By demonstrating an innovative statistical approach that intelligently incorporates different criteria for model selection, this research makes significant contributions to risk mitigation efforts at point source-impacted sites and lays the groundwork for future targeted regulatory actions.

Factors affecting the occurrence and accumulation of perfluoroalkyl acids in indoor dust in Tainan, Taiwan

Perfluoroalkyl acids (PFAAs) are environmentally and biologically persistent chemicals. In this study, we investigated the concentrations of six PFAAs in dust samples collected from different indoor environments in a college campus in Tainan, Taiwan, and assessed the health risk of PFAAs exposure to college students. We also analyzed the effects of dust characteristics (total organic carbon, moisture content, and dust content) on PFAAs levels. With regard to the space type, the median of total PFAAs concentrations were in the order of laboratories (528.9 μg kg-1) > offices (304.2 μg kg-1) > dormitories (180.1 μg kg-1) > classrooms (105.1 μg kg-1). With regard to the height from the ground, the median total PFAAs concentrations were in the order of dust near the floors (>2 m; 383.6 μg kg-1) > near the ceiling (0-2 m; 202.5 μg kg-1) > on the ground (0 m; 145.6 μg kg-1). The main species of PFAAs, perfluorooctane sulfonate and short-chain perfluoroalkyl carboxylates, accounted for respectively 30%-60% and ∼20%-37% of total PFAAs pollution in the indoor space types and sampling heights under consideration. The average daily intake (ADI) values of six PFAAs for college students were found to be 0.059-0.126 ng kg-1 BW day-1 (BW: body weight), with dormitories and workplaces (i.e., laboratories and offices) accounting for over 40% and ∼50% of the ADI, respectively. The estimated hazard quotient ranged from 0.0029 to 0.0063, three orders of magnitude lower than 1, suggesting relatively low risks for college students exposed to the six PFAAs monitored in indoor dust. The analysis of dust characteristics revealed that total organic carbon did not have a significant effect on PFAAs levels as we expected. In contrast, dust moisture and cation content dominated PFAAs accumulation.

In vitro modeling of the post-ingestion bioaccessibility of per- and polyfluoroalkyl substances sorbed to soil and house dust

Per- and polyfluoroalkyl substances (PFAS) are regularly found in soils and dusts, both of which can be consumed by children at relatively high amounts. However, there is little data available to model the bioaccessibility of PFAS in soils and dusts when consumed or to describe how the physiochemical properties of PFAS and soils/dusts might affect bioaccessibility of these chemicals. Because bioaccessibility is an important consideration in estimating absorbed dose for exposure and risk assessments, in the current study, in vitro assays were used to determine bioaccessibility of 14 PFAS in 33 sets of soils and dusts. Bioaccessibility assays were conducted with and without a sink, which was used to account for the removal of PFAS due to their movement across the human intestine. Multiple linear regression with backward elimination showed that a segmented model using PFAS chain length, number of branches, and percent total organic carbon explained 78.0%-88.9% of the variability in PFAS bioaccessibility. In general, PFAS had significantly greater bioaccessibility in soils relative to dusts and the addition of a sink increased bioaccessibility in the test system by as much as 10.8% for soils and 20.3% for dusts. The results from this study indicate that PFAS bioaccessibility in soils and dusts can be predicted using a limited set of physical chemical characteristics and could be used to inform risk assessment models.

Prevalence and Source Tracing of PFAS in Shallow Groundwater Used for Drinking Water in Wisconsin, USA

Samples from 450 homes with shallow private wells throughout the state of Wisconsin (USA) were collected and analyzed for 44 individual per- and polyfluoroalkyl substances (PFAS), general water quality parameters, and indicators of human waste as well as agricultural influence. At least one PFAS was detected in 71% of the study samples, and 22 of the 44 PFAS analytes were detected in one or more samples. Levels of PFOA and/or PFOS exceeded the proposed Maximum Contaminant Levels of 4 ng/L, put forward by the U.S. Environmental Protection Agency (EPA) in March 2023, in 17 of the 450 samples, with two additional samples containing PFHxS ≳ 9 ng/L (the EPA-proposed hazard index reference value). Those samples above the referenced PFAS levels tend to be associated with developed land and human waste indicators (artificial sweeteners and pharmaceuticals), which can be released to groundwater via septic systems. For a few samples with levels of PFOA, PFOS, and/or PFHxS > 40 ng/L, application of wastes to agricultural land is a possible source. Overall, the study suggests that human waste sources, septic systems in particular, are important sources of perfluoroalkyl acids, especially ones with ≤8 perfluorinated carbons, in shallow groundwater.

Investigation of Sources of Fluorinated Compounds in Private Water Supplies in an Oil and Gas-Producing Region of Northern West Virginia

Per- and polyfluoroalkyl substances (PFASs) are a class of toxic organic compounds that have been widely used in consumer applications and industrial activities, including oil and gas production. We measured PFAS concentrations in 45 private wells and 8 surface water sources in the oil and gas-producing Doddridge, Marshall, Ritchie, Tyler, and Wetzel Counties of northern West Virginia and investigated relationships between potential PFAS sources and drinking water receptors. All surface water samples and 60% of the water wells sampled contained quantifiable levels of at least one targeted PFAS compound, and four wells (8%) had concentrations above the proposed maximum contaminant level (MCL) for perfluorooctanoic acid (PFOA). Individual concentrations of PFOA and perfluorobutanesulfonic acid exceeded those measured in finished public water supplies. Total targeted PFAS concentrations ranged from nondetect to 36.8 ng/L, with surface water concentrations averaging 4-fold greater than groundwater. Semiquantitative, nontargeted analysis showed concentrations of emergent PFAS that were potentially higher than targeted PFAS. Results from a multivariate latent variable hierarchical Bayesian model were combined with insights from analyses of groundwater chemistry, topographic characteristics, and proximity to potential PFAS point sources to elucidate predictors of PFAS concentrations in private wells. Model results reveal (i) an increased vulnerability to contamination in upland recharge zones, (ii) geochemical controls on PFAS transport likely driven by adsorption, and (iii) possible influence from nearby point sources.

Maternal Serum Concentrations of Per- and Polyfluoroalkyl Substances in Early Pregnancy and Small for Gestational Age in Southern Sweden

Small for gestational age (SGA) is considered an adverse birth outcome. Per- and polyfluoralkyl substances (PFAS) have become increasingly investigated as contributing environmental factors, thus far with inconclusive results. The current study aimed to investigate the hypothesized association between increased maternal PFAS levels in early pregnancy and an increased risk for SGA birth. This population-based study used data from a sample of children born in Scania, Southern Sweden, between 1995 and 2009. Two groups were compared: cases born with SGA (n = 298) and non-SGA controls (n = 580). The cases consisted of two subgroups: one included women whose children's growth in late pregnancy was in the lowest quartile, and another included women from the remaining growth quartiles. Corresponding maternal serum samples were collected from a biobank and analyzed for concentrations of four types of PFAS: perfluorooctanoic acid (PFOA), perfluorononanoic acid (PFNA), perfluorohexane sulfonic acid (PFHxS), and perfluorooctane sulfonic acid (PFOS) using liquid chromatography-tandem mass spectrometry (LC/MS/MS). The results were combined with information from birth registers and analyzed using Mann-Whitney U-tests and logistic regression-unadjusted as well as adjusted for potential confounders. In conclusion, elevated maternal concentrations of PFAS were not associated with an increased risk of SGA birth. However, significant ORs were observed in a subgroup analysis restricted to women of Nordic origin (unadjusted OR 3.2 and adjusted OR 2.4) for PFHxS.

PFAS soil concentrations surrounding a hazardous waste incinerator in East Liverpool, Ohio, an environmental justice community

Per- and polyfluoroalkyl substances (PFAS) are a class of synthetic compounds widely used in industrial and consumer products. While PFAS provide product durability, these chemicals are ubiquitous, persistent, bioaccumulative, and toxic. These characteristics make the ultimate disposal of PFAS a challenge. One current disposal method is incineration; however, little research has been conducted on the safety and effectiveness of PFAS incineration. The characteristics of communities with hazardous waste incinerators that have received PFAS shipments indicate that more individuals with lower incomes and individuals with less education than the US average are at higher risk of exposure, which presents important environmental justice and health equity concerns of PFAS incineration. Situated in eastern Ohio, East Liverpool is an Appalachian community that is home to a large hazardous-waste incinerator, operated by Heritage WTI, that began accepting PFAS in 2019. Residents are concerned that the disposal lacks the research necessary to assure safety for the residents. Due to both community interest and data gaps regarding PFAS incineration, our research team conducted a pilot study to examine the distribution and concentration of PFAS in soil samples surrounding the incinerator. All 35 soil samples had measurable amounts of PFAS including perfluorobutanesulfonic acid (PFBS), perfluorooctanesulfonic acid (PFOS), perfluorooctanoic acid (PFOA), and hexafluoropropylene oxide dimer acid (HFPO-DA)/GenX. PFOS was measured in the majority of soil samples (97%) with a range of 50-8,300 ng/kg. PFOA was measured in 94% of soil samples with a range of 51 ng/kg to 1300 ng/kg. HFPO-DA/GenX was measurable in 12 soil samples with concentrations of ranging from 150 ng/kg to 1500 ng/kg. Further research on PFAS disposal will advance knowledge and action related to regulatory requirements and exposure prevention, ultimately improving individual and community protections and health equity.

Perfluorooctanoic acid (PFOA) and hexafluoropropylene oxide-dimer acid (GenX): Hepatic stress and bile acid metabolism with different pathways

Per- and polyfluoroalkyl substances (PFASs) and perfluoroalkyl ether carboxylic acids (PFECAs) are organic chemicals that are widely used in the manufacture of a wide range of human-made products. Many monitoring findings revealed the presence of PFASs and PFECAs in numerous environmental sources, including water, soil, and air, which drew more attention to both chemicals. Because of their unknown toxicity, the discovery of PFASs and PFECAs in a variety of environmental sources was viewed as a cause for concern. In the present study, male mice were given orally one of the typical PFASs, perfluorooctanoic acid (PFOA), and one of the representative PFECAs, hexafluoropropylene oxide-dimer acid (HFPO-DA). The liver index showing hepatomegaly rose significantly after 90 d of exposure to PFOA and HFPO-DA, respectively. While sharing similar suppressor genes, both chemicals demonstrated unique hepatotoxic mechanisms. In different ways, these two substances altered the expression of hepatic stress-sensing genes as well as the regulation of nuclear receptors. Not only are bile acid metabolism-related genes in the liver altered, but cholesterol metabolism-related genes as well. These results indicate that PFOA and HFPO-DA both cause hepatotoxicity and bile acid metabolism impairment with distinct mechanisms.

Firefighters' exposure to per-and polyfluoroalkyl substances (PFAS) as an occupational hazard: A review

The term "firefighter" and "cancer" have become so intertwined in the past decade that they are now nearly inseparable. Occupational exposure of firefighters to carcinogenic chemicals may increase their risk of developing different types of cancer. PFAS are one of the major classes of carcinogenic chemicals that firefighters are exposed to as occupational hazard. Elevated levels of PFAS have been observed in firefighters' blood serum in recent studies. Possible sources of occupational exposure to PFAS include turnout gear, aqueous film-forming foam, and air and dust at both the fire scene and fire station. Preliminary discussion on PFAS includes definition, classification, and chemical structure. The review is then followed by identifying the sources of PFAS that firefighters may encounter as an occupational hazard. The structural properties of the PFAS used in identified sources, their degradation, and exposure pathways are reviewed. The elevated level of PFAS in the blood serum and how this might associate with an increased risk of cancer is discussed. Our review shows a significant amount of PFAS on turnout gear and their migration to untreated layers, and how turnout gear itself might be a potential source of PFAS exposure. PFAS from aqueous film-forming foams (AFFF), air, and dust of fire stations have been already established as potential exposure sources. Studies on firefighters' cancer suggest that firefighters have a higher cancer risk compared to the general population. This review suggests that increased exposure to PFAS as an occupational hazard could be a potential cancer risk for firefighters.

Per- and polyfluoroalkyl substances (PFAS) exposure through munitions in the Russia-Ukraine conflict

Considered contaminants of emerging concern, per- and polyfluoroalkyl substances (PFAS) are a class of toxic, manufactured chemicals found in commercial and consumer products such as nonstick cookware, food packaging, and firefighting foams. Human exposure to PFAS through inhalation and ingestion can cause a variety of harmful effects and negative health outcomes. Per- and polyfluoroalkyl substances possess high polarity and chemical stability, enabling them to resist degradation in most environmental conditions. These characteristics allow PFAS to be mobile in soil, air, and water, and bioaccumulate in living organisms. Due to their thermally resistant chemical properties, PFAS are used as binders in polymer-bonded explosives (PBX) and in various components of munitions. Thus, when munitions are detonated, PFAS are released into the environment as aerosols and can deposit in the soil, surface water, or biota. Air emission modeling suggests that ground-level and airborne detonation of munitions can increase PFAS deposition both locally and long range. Further, if industrial facilities with PFAS are damaged or destroyed, there is greater potential for environmental degradation from increased release of PFAS into the environment. As a consequence of their persistent nature, PFAS can remain in an environment long after armed conflict, indirectly affecting ecosystems, food sources, and human health. The toxic contamination from munitions could present a greater hazard to a larger population over time than acute detonation events. This article discusses methods for estimating war-related damage from PFAS by exploring predictive modeling approaches and postwar ground validation techniques. Integr Environ Assess Manag 2023;19:376-381. © 2022 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Spatial distribution, compositional profile, sources, ecological and human health risks of legacy and emerging per- and polyfluoroalkyl substances (PFASs) in freshwater reservoirs of Punjab, Pakistan

Per- and polyfluoroalkyl substances (PFASs) are a large group of chemicals reported in global environment and are responsible for various adverse impacts on humans and environment. We report a comprehensive study on occurrence of PFASs, including legacy, substitute and emerging ones, from Pakistan. Surface water samples were collected from five ecologically important freshwater reservoirs in Pakistan, namely, Head Panjnad (HP), Head Trimmu (HT), Chashma Barrage (CB), Head Blloki (HB), and Head Qadirabad (HQ). The detection frequencies of PFASs ranged between 37 %-100 %. The highest concentration of ∑₁₅PFASs was detected at HP (114.1 ng L^-1), whereas the lowest at HQ (19.9 ng L^-1). Among the analyzed PFASs, 6:2 fluorotelomer sulfonic acid (6:2 FTS) and perfluorooctanoic acid (PFOA) showed maximum mean concentrations of 9.1 ng L^-1 and 7 ng L^-1 at HP, followed by Perfluorooctane sulfonic acid (PFOS) with level of 0.99 ng L^-1 at HT. The ecological risk assessment for selected species i.e., daphnid, mysid, fish and green algae showed that PFOS, perfluorononanoic acid (PFNA), perfluorodecanoic acid (PFDA) exhibited moderate risk i.e., Hazard Quotients (HQs) < 1 to the modeled organisms, whereas perfluorobutane sulfonic acid (PFBS) showed the high risk to green algae (HQs = 8.6) and PFOA presented a high risk to all the organisms (HQs ranged between 1.04 and 7.38). The level of ∑PFASs at HP (114.1 ng L^-1) exceed the EU guideline value of ∑PFASs in water (100 ng L^-1), however the risk quotient (RQ_mix) values of all age groups were < 1 implying that the detected PFASs in water do not pose risk to human health. Source apportionment through Positive Matrix Factorization (PMF) showed that industrial effluent is the main source of PFASs in freshwater reservoirs. Comparable concentrations of legacy and substitute PFASs in this study indicate that legacy PFASs are still in use adjacent to ecologically important water reservoirs.

Association between per- and polyfluoroalkyl substances exposure and risk of diabetes: a systematic review and meta-analysis

BACKGROUND

Emerging evidence suggests that per- and polyfluoroalkyl substances (PFAS) are endocrine disruptors and may contribute to the etiology of diabetes.

OBJECTIVES

This study aimed to systematically review the epidemiological evidence on the associations of PFAS with mortality and morbidity of diabetes and to quantitatively evaluate the summary effect estimates of the existing literature.

METHODS

We searched three electronic databases for epidemiological studies concerning PFAS and diabetes published before April 1, 2022. Summary odds ratio (OR), hazard ratio (HR), or β and their 95% confidence intervals (CIs) were respectively calculated to evaluate the association between PFAS and diabetes using random-effects model by the exposure type, and dose-response meta-analyses were also performed when possible. We also assessed the risk of bias of the studies included and the confidence in the body of evidence.

RESULTS

An initial literature search identified 1969 studies, of which 22 studies were eventually included. The meta-analyses indicated that the observed statistically significant PFAS-T2DM associations were consistent in cohort studies, while the associations were almost non-significant in case-control and cross-sectional studies. Dose-response meta-analysis showed a "parabolic-shaped" association between perfluorooctanoate acid (PFOA) exposure and T2DM risk. Available evidence was rated with "low" risk of bias, and the level of evidence for PFAS and incident T2DM was considered "moderate".

CONCLUSIONS

Our findings suggest that PFAS exposure may increase the risk of incident T2DM, and that PFOA may exert non-monotonic dose-response effect on T2DM risk. Considering the widespread exposure, persistence, and potential for adverse health effects of PFAS, further cohort studies with improvements in expanding the sample size, adjusting the covariates, and considering different types of PFAS exposure at various doses, are needed to elucidate the putative causal associations and potential mode of action of different PFAS on diabetes.

IMPACT STATEMENT

A growing body of evidence suggests that per- and polyfluoroalkyl substances (PFAS) are endocrine disruptors and may contribute to the development of diabetes. However, epidemiological evidence on the associations of PFAS and diabetes is inconsistent. We performed this comprehensive systematic review and meta-analysis to quantitatively synthesize the evidence. The findings of this study suggest that exposure to PFAS may increase diabetes risk among the general population. Reduced exposure to these "forever and everywhere chemicals" may be an important preventative approach to reducing the risk of diabetes across the population.

Poly- and Perfluoroalkyl Substances (PFAS) in Landfills: Occurrence, Transformation and Treatment

Landfills have served as the final repository for > 50 % municipal solid wastes in the United States. Because of their widespread uses and persistence in the environment, per- and polyfluoroalkyl substances (PFAS) (>4000 on the global market) are ubiquitously present in everyday consumer, commercial and industrial products, and have been widely detected in both closed (tens ng/L) and active (thousands to ten thousands ng/L) landfills due to disposal of PFAS-containing materials. Along with the decomposition of wastes in-place, PFAS can be transformed and released from the wastes into leachate and landfill gas. Consequently, it is critical to understand the occurrence and transformation of PFAS in landfills and the effectiveness of landfills, as a disposal alternative, for long-term containment of PFAS. This article presents a state-of-the-art review on the occurrence and transformation of PFAS in landfills, and possible effect of PFAS on the integrity of modern liner systems. Based on the data published from 10 countries (250 + landfills), C4-C7 perfluoroalkyl carboxylic acids were found predominant in the untreated landfill leachate and neutral PFAS, primarily fluorotelomer alcohols, in landfill air. The effectiveness and limitations of the conventional leachate treatment technologies and emerging technologies were also evaluated to address PFAS released into the leachate. Among conventional technologies, reverse osmosis (RO) may achieve a high removal efficiency of 90-100 % based on full-scale data, which, however, is vulnerable to the organic fouling and requires additional disposal of the concentrate. Implications of these knowledge on PFAS management at landfills are discussed and major knowledge gaps are identified.

Vermont-wide assessment of anthropogenic background concentrations of perfluoroalkyl substances in surface soils

Shallow surface soils from 66 suburban sampling locations across Vermont were analyzed for 17 different perfluoroalkyl acids (PFAA). PFAA were detected in all 66 surface soils, with a total concentration of PFAA ranging from 540 to 36,000 ng/kg dry soil weight (dw). Despite the complexity of site-specific factors, some general trends and correlations in PFAA concentrations were observed. For instance, perfluoro-1-octanesulfonate (PFOS) dominated in all soil samples while seven other PFAA, including perfluoro-n-nonanoic acid, perfluoro-n-octanoic acid, perfluoro-n-hexanoic acid, perfluoro-n-heptanoic acid, perfluoro-n-decanoic acid, perfluoro-n-undecanoic acid, perfluoro-1-butanesulfonate, and perfluoro-1-hexanesulfonate (PFNA, PFOA, PFHxA, PFHpA, PFDA, PFUnDA, and PFBS, respectively), were identified at more than 50 % of the locations. Perfluoroalkyl carboxylic acids (PFCA) showed a positive correlation with total organic carbon, whereas no clear correlation was observed for perfluoroalkyl sulfonate acids (PFSA). In addition, variations in geographical distributions of PFAA were observed, with relatively higher total PFAA in northern regions when compared to Southern Vermont. Moreover, PFHxA, PFNA, PFDA, PFUnDA, PFOS, and total PFAA were positively correlated to land-use types in Northern Vermont. These results are useful for understanding unique behaviors of PFCA vs. PFSA in geospatially distributed surface soils and for providing anthropogenic background data for setting PFAS cleanup standards for surface soils.

Perfluoroalkyl and polyfluoroalkyl substances (PFASs) in groundwater: current understandings and challenges to overcome

Perfluoroalkyl and polyfluoroalkyl substances (PFASs) have been frequently detected in groundwater globally. With the phase-out of perfluorooctane sulfonate (PFOS) and perfluorooctanate (PFOA) due to their risk to the ecosystem and human population, various novel PFASs have been used as replacements and detected in groundwater. In order to summarize the current understanding and knowledge gaps on PFASs in groundwater, we reviewed the studies about environmental occurrence, transport, and risk of legacy and novel PFASs in groundwater published from 1999 to 2021. Our review suggests that PFOS and PFOA could still be detected in groundwater due to the long residence time and the retention in the soil-groundwater system. Firefighting training sites, industrial parks, and landfills were commonly hotspots of PFASs in groundwater. More novel PFASs have been detected via nontarget analysis using high-resolution mass spectrometry. Some novel PFASs had concentrations comparable to that of PFOS and PFOA. Both legacy and novel PFASs can pose a risk to human population who rely on contaminated groundwater as drinking water. Transport of PFASs to groundwater is influenced by various factors, i.e., the compound structure, the hydrochemical condition, and terrain. The exchange of PFASs between groundwater and surface water needs to be better characterized. Field monitoring, isotope tracing, nontarget screening, and modeling are useful approaches and should be integrated to get a comprehensive understanding of PFASs sources and behaviors in groundwater.

Fate of Per- and Polyfluoroalkyl Substances from Durable Water-Repellent Clothing during Use

To make outdoor clothing water- or dirt-repellent, durable water-repellent (DWR) coatings based on side-chain fluorinated polymers (SFPs) are used. During use of outdoor clothing, per- and polyfluoroalkyl substances (PFASs) can be emitted from the DWR to the environment. In this study, the effects of aging, washing, and tumble drying on the concentration of extractable PFASs in the DWR of perfluorohexane-based short-chain SFPs (FC-6 chemistry) and of perfluorooctane-based long-chain SFPs (FC-8 chemistry) were assessed. For this purpose, polyamide (PA) and polyester (PES) fabrics were coated with FC-6- and FC-8-based DWRs. Results show that aging of the coated fabrics causes an increase in concentration and formation of perfluoroalkyl acids (PFAAs). The effect of aging on the volatile PFASs depends on the type of fabric. Washing causes a decrease in PFAA concentrations, and in general, volatile PFASs are partly washed out of the textiles. However, washing can also increase the extractable concentration of volatile PFASs in the fabrics. This effect becomes stronger by a combination of aging and washing. Tumble drying does not affect the PFAS concentrations in textiles. In conclusion, aging and washing of fabrics coated with the DWR based on SFPs release PFASs to the environment.

Association Between Exposure to Per- and Polyfluoroalkyl Substances and Birth Outcomes: A Systematic Review and Meta-Analysis

Background

A large body of emerging evidence suggests that per- and polyfluoroalkyl substances (PFAS) affect birth outcomes in various pathways, but the evidence is inconsistent. Therefore, this study aimed to systematically review the epidemiological evidence on PFAS exposure and birth outcomes.

Methods

Three electronic databases were searched for epidemiological studies through February 13, 2021. We used random-effects meta-analysis for eight birth outcome indicators to calculate summary effect estimates for various exposure types. The risk of bias and the overall quality and level of evidence for each exposure-outcome pair were assessed.

Results

The initial search identified 58 potentially eligible studies, of which 46 were ultimately included. Many PFAS were found to have previously unrecognized statistically significant associations with birth outcomes. Specifically, birth weight (BW) was associated with PFAS, with effect sizes ranging from −181.209 g (95% confidence interval (CI) = −360.620 to −1.798) per 1 ng/ml increase in perfluoroheptanesulfonate (PFHpS) to −24.252 g (95% CI = −38.574 to −9.930) per 1 ln (ng/ml) increase in perfluorodecaoic acid (PFDA). Similar patterns were observed between other PFAS and birth outcomes: perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) with birth length (BL) and ponderal index (PI), PFOS and perfluorododecanoic acid (PFDoDA) with head circumference (HC), PFHpS with gestational age (GA), and perfluorononanoic acid (PFNA) and PFHpS with preterm birth (PTB). Additionally, PFDA showed a statistically significant association with small for gestational age (SGA). The level of the combined evidence for each exposure-outcome pair was considered to be “moderate”.

Conclusion

This study showed that PFAS exposure was significantly associated with increased risks of various adverse birth outcomes and that different birth outcome indicators had different degrees of sensitivity to PFAS. Further studies are needed to confirm our results by expanding the sample size, clarifying the effects of different types or doses of PFAS and the time of blood collection on birth outcomes, and fully considering the possible confounders.

PFAS Molecules: A Major Concern for the Human Health and the Environment

Per- and polyfluoroalkyl substances (PFAS) are a group of over 4700 heterogeneous compounds with amphipathic properties and exceptional stability to chemical and thermal degradation. The unique properties of PFAS compounds has been exploited for almost 60 years and has largely contributed to their wide applicability over a vast range of industrial, professional and non-professional uses. However, increasing evidence indicate that these compounds represent also a serious concern for both wildlife and human health as a result of their ubiquitous distribution, their extreme persistence and their bioaccumulative potential. In light of the adverse effects that have been already documented in biota and human populations or that might occur in absence of prompt interventions, the competent authorities in matter of health and environment protection, the industries as well as scientists are cooperating to identify the most appropriate regulatory measures, substitution plans and remediation technologies to mitigate PFAS impacts. In this review, starting from PFAS chemistry, uses and environmental fate, we summarize the current knowledge on PFAS occurrence in different environmental media and their effects on living organisms, with a particular emphasis on humans. Also, we describe present and provisional legislative measures in the European Union framework strategy to regulate PFAS manufacture, import and use as well as some of the most promising treatment technologies designed to remediate PFAS contamination in different environmental compartments.

A Statistical Approach for Identifying Private Wells Susceptible to Perfluoroalkyl Substances (PFAS) Contamination

Drinking water concentrations of per- and polyfluoroalkyl substances (PFAS) exceed provisional guidelines for millions of Americans. Data on private well PFAS concentrations are limited in many regions and monitoring initiatives are costly and time-consuming. Here we examine modeling approaches for predicting private wells likely to have detectable PFAS concentrations that could be used to prioritize monitoring initiatives. We used nationally available data on PFAS sources, and geologic, hydrologic and soil properties that affect PFAS transport as predictors and trained and evaluated models using PFAS data (n~2300 wells) collected by the state of New Hampshire between 2014 and 2017. Models were developed for the five most frequently detected PFAS: perfluoropentanoate, perfluorohexanoate, perfluoroheptanoate, perfluorooctanoate, and perfluorooctane sulfonate. Classification random forest models that allow non-linearity in interactions among predictors performed the best (area under the receiver operating characteristics curve: 0.74 - 0.86). Point sources such as the plastics/rubber and textile industries accounted for the highest contribution to accuracy. Groundwater recharge, precipitation, soil sand content, and hydraulic conductivity were secondary predictors. Our study demonstrates the utility of machine learning models for predicting PFAS in private wells and the classification random forest model based on nationally available predictors is readily extendable to other regions.

Environmental Source Tracking of Per- and Polyfluoroalkyl Substances within a Forensic Context: Current and Future Techniques

The source tracking of per- and polyfluoroalkyl substances (PFASs) is a new and increasingly necessary subfield within environmental forensics. We define PFAS source tracking as the accurate characterization and differentiation of multiple sources contributing to PFAS contamination in the environment. PFAS source tracking should employ analytical measurements, multivariate analyses, and an understanding of PFAS fate and transport within the framework of a conceptual site model. Converging lines of evidence used to differentiate PFAS sources include: identification of PFASs strongly associated with unique sources; the ratios of PFAS homologues, classes, and isomers at a contaminated site; and a site's hydrogeochemical conditions. As the field of PFAS source tracking progresses, the development of new PFAS analytical standards and the wider availability of high-resolution mass spectral data will enhance currently available analytical capabilities. In addition, multivariate computational tools, including unsupervised (i.e., exploratory) and supervised (i.e., predictive) machine learning techniques, may lead to novel insights that define a targeted list of PFASs that will be useful for environmental PFAS source tracking. In this Perspective, we identify the current tools available and principal developments necessary to enable greater confidence in environmental source tracking to identify and apportion PFAS sources.

Endocrine disruption by PFAS: A major concern associated with legacy and replacement substances

Perand poly-fluorinated alkyl substances (PFAS) have been used for decades in a great variety of processes and products by virtue of their exceptional properties, versatility and chemical stability. Nevertheless, it is increasingly recognized that these substances can represent a serious hazard to human health and living organisms due to their persistence, long-range transport potential and tendency to accumulate in biota. For this reason, some efforts have been made across the EU to identify alternative molecules, with a shorter carbon chain and theoretically safer profile, that might replace the previous generation of legacy PFAS. Unfortunately, this strategy has not been entirely successful and serious concerns are still posed by PFAS in different human populations. Among others, an emerging aspect is represented by the adverse effects that both legacy and alternative PFAS can exert on the human endocrine system, with respect to vulnerable target subpopulations. In this review we will briefly summarize PFAS properties, uses and environmental fate, focusing on their effects on human reproductive capacity and fertility, body weight control and obesity as well as thyroid function.