An unfused-ring acceptor with high side-chain economy enabling 11.17% as-cast organic solar cells

Mechanism of 7H-Dibenzo[c,g]carbazole metabolism in cytochrome P450 1A1: Insights from computational studies

7H-Dibenzo[c,g]carbazole (DBC) is a prevalent environmental contaminant that induces tumorigenesis in several experimental animals. Recently, it has been utilized to develop high-performance solar cells and organic phosphorescent materials. It is imperative to strengthen investigations of DBC metabolism to understand its potential risks to human health. In this study, human CYP1A1 was employed as the metabolic enzyme to investigate the metabolic mechanism of DBC by molecular docking, molecular dynamics (MD) simulation, and quantum mechanical (QM) calculation. The results indicate that DBC binds to CYP1A1 in two modes (mode 1 and mode 2) mainly through nonpolar solvation energies (ΔGnonpolar). The formation of the two binding modes is attributed to the anchoring effect of the hydrogen bond formed by DBC with Asp320 (mode 1) or Ser116 (mode 2). Mode 1 is a "reactive" conformation, while mode 2 is not considered a "reactive" conformation. C5 is identified as the dominant site, and the pyrrole nitrogen cannot participate in the metabolism. DBC is metabolized mainly by a distinct electrophilic addition-rearrangement mechanism, with an energy barrier of 21.74 kcal/mol. The results provide meaningful insights into the biometabolic process of DBC and contribute to understanding its environmental effects and health risks.

Advances in organic photovoltaic cells: a comprehensive review of materials, technologies, and performance

This paper provides a comprehensive overview of organic photovoltaic (OPV) cells, including their materials, technologies, and performance. In this context, the historical evolution of PV cell technology is explored, and the classification of PV production technologies is presented, along with a comparative analysis of first, second, and third-generation solar cells. A classification and comparison of PV cells based on materials used is also provided. The working principles and device structures of OPV cells are examined, and a brief comparison between device structures is made, highlighting their advantages, disadvantages, and key features. The various parts of OPV cells are discussed, and their performance, efficiency, and electrical characteristics are reviewed. A detailed SWOT analysis is conducted, identifying promising strengths and opportunities, as well as challenges and threats to the technology. The paper indicates that OPV cells have the potential to revolutionize the solar energy industry due to their low production costs, and ability to produce thin, flexible solar cells. However, challenges such as lower efficiency, durability, and technological limitations still exist. Despite these challenges, the tunability and versatility of organic materials offer promise for future success. The paper concludes by suggesting that future research should focus on addressing the identified challenges and developing new materials and technologies that can further improve the performance and efficiency of OPV cells.

Improving the Performance of Polymer Solar Cells with Benzo[ghi]perylenetriimide-Based Small-Molecules as Interfacial Layers

In this study, we prepared three benzo[ghi]perylenetriimide (BPTI) conjugated molecules as electron-transporting surface-modifying layers for polymer solar cells (PSCs). These three BPTI derivatives differed in the nature of their terminal functionalities, featuring butylamine (C₃NH₂), propylammonium iodide (C₃NH₃I), and butyldimethylamine (C₃DMA) units, respectively. We evaluated the optoelectronic properties of PTB7-Th: PC₇₁BM blends modified with these interfacial layers, as well as the performance of resulting PSCs. We used UV-Vis spectroscopy, atomic force microscopy, surface energy analysis, ultraviolet photoelectron spectroscopy, and photoelectric flow measurements to examine the phenomena behind the changes in the optoelectronic behavior of these blend films. The presence of a BPTI derivative changed the energy band alignment at the ZnO-active layer interface, leading to the ZnO film behaving more efficiently as an electron-extraction electrode. Modifying the ZnO surface with the BPTI-C₃NH₃I derivative resulted in a best power conversion efficiency (PCE) of 10.2 ± 0.53% for the PTB7-Th:PC₇₁BM PSC (cf. PCE of the control device of 9.1 ± 0.13%). In addition, modification of a PM6:Y6:PCBM PSC with the BPTI-C₃NH₃I derivative increased its PCE from 15.6 ± 0.25% to 16.5 ± 0.18%. Thus, BPTI derivatives appear to have potential as IFLs when developing high-performance PSCs, and might also be applicable in other optoelectronic devices.

Machine Learning-Assisted Polymer Design for Improving the Performance of Non-Fullerene Organic Solar Cells

Despite the progress in machine learning (ML) in terms of prediction of power conversion efficiency (PCE) in organic photovoltaics (OPV), the effectiveness of ML in practical applications is still lacking owing to the complex structure-property relationship. Therefore, verifying the potential of ML through experiments can amplify the use of ML models. Herein, we developed a new series of π-conjugated polymers comprising benzodithiophene and thiazolothiazole with fluorination and alkylthio chains (PBDTTzBO, PFSBDTTzBO, and PFBDTTzBO) for non-fullerene (NF) acceptors based on our random-forest ML model for OPVs. Notably, the order of the ML-predicted PCEs of these polymers with IT-4F (9.93, 11.35, and 11.47%) was in good agreement with their experimental PCEs (5.24, 7.35, and 10.30%). In contrast, an inverse correlation was observed between the predicted (9.20, 12.29, and 12.20%) and experimental (11.98, 1.57, and 6.53%) PCEs with Y6. Both the findings are interpreted in terms of surface morphology, transient photoconductivity, charge carrier mobility, polymer orientation, and miscibility, quantified by the Flory-Huggins parameters. Herein, we present an ML-assisted polymer design for high-performance non-fullerene organic photovoltaics (NFOPVs) and elucidate the importance of the subtle alterations in the morphology of NFOPVs.

Unfused Acceptors Matching π-Bridge Blocks with Proper Frameworks Enable Over 12% As-Cast Organic Solar Cells

Emerging unfused-ring acceptors (UFAs) have been explored in pursuit of low-cost high-efficient organic solar cells (OSCs). Assembling unfused building blocks into proper frameworks are challenging for the molecular design of UFAs. The authors report herein four UFAs adopting either dithiophene cyclopentadiene (DTC) or dithieno[3,2-b:2',3'-d]pyrrole (DTP) as π-bridge units with different molecular frameworks for high-efficient as-cast OSCs. All these acceptors exhibit strong near-infrared absorption and narrow optical band gap (E_g ^opt  < 1.50 eV). DTC-bridged symmetric and DTP-bridged asymmetric UFAs exhibit higher planar conformation as well as suitable miscibility and homogeneous phase separation when blending with polymer donor PBDB-T to promote efficient charge transport in the blends. Their blends with PBDB-T contribute optimal PCE of 12.17% and 11.92% in as-cast OSCs, among the highest values for UFAs based as-cast devices in the literature. Experimental and theoretical simulations systematically reveal the impact of manipulating the molecular framework of UFAs on their conformation, optoelectronic, and photovoltaic performance. The results indicate the matching π-bridge units with molecular frameworks as an attractive approach to design UFAs for high-performance as-cast OSCs.

Facile Strategy for Third Component Optimization in Wide-Band-Gap π-Conjugated Polymer Donor-Based Efficient Ternary All-Polymer Solar Cells

Emerging organic solar cells based on a ternary strategy is one of the most effective methods for improving the blend film morphology, absorption ability, and device performances. On the other hand, this strategy has had very limited success in all-polymer solar cells (all-PSCs) because of the scarcity of new polymers and the challenges faced during third component optimization. Herein, highly efficient ternary all-PSCs were developed from siloxane-functionalized side chains with a wide-band-gap (E_g) polymer, Si-BDT, which is blended with a medium and ultra-narrow E_g polymer donor and acceptor, PTB7-Th, and DCNBT-TPIC. An impressive power conversion efficiency (PCE) of 13.45% was achieved in the ternary all-PSCs [PTB7-Th(0.6):Si-BDT(0.4):DCNBT-TPIC(0.6)] with the addition of 0.4 wt equivalent Si-BDT into binary all-PSCs [PTB7-Th(1):DCNBT-TPIC(0.6) PCE of 10.11%]. In contrast, the binary all-PSCs with a Si-BDT(1):DCNBT-TPIC(0.6) active layer only exhibited a good PCE of 9.92%. More importantly, the siloxane-functionalized side chains increase the light-absorption ability, carrier mobility, blend miscibility, and film morphology in ternary devices compared to those of the binary devices. Hence, exciton dissociation, charge carrier transport, and suppressed recombination properties were facilitated. In the presence of Si-BDT, both binary and ternary all-PSCs PCEs are significantly improved. Indeed, 13.45% PCE is one of the best values reported for all-PSCs except for those based on polymerized small molecule acceptors. In addition, the ternary all-PSCs showed excellent environmental and thermal stabilities with 95 and 84% of the initial PCE retained after 900 and 500 h, respectively. These results offer effective device engineering, providing a new avenue for improving the device performance in ternary all-PSCs.

Impact of Aryl End Group Engineering of Donor Polymers on the Morphology and Efficiency of Halogen-Free Solvent-Processed Nonfullerene Organic Solar Cells

End group engineering on the side chain of π-conjugated donor polymers is explored as an effective way to develop efficient photovoltaic devices. In this work, we designed and synthesized three new π-conjugated polymers (PBDT-BZ-1, PBDT-S-BZ, and PBDT-BZ-F) with terminal aryl end groups on the side chain of chlorine-substituted benzo[1,2-b:4,5b']dithiophene (BDT). End group modifications showed notable changes in energy levels, dipole moments, exciton lifetimes, energy losses, and charge transport properties. Remarkably, the three new polymers paired with IT-4F (halogen-free solvent processed/toluene:DPE) displayed high power conversion efficiencies (PCEs) compared to a polymer (PBDT-Al-5) without a terminal end group (PCE of 7.32%). Interestingly, PBDT-S-BZ:IT-4F (PCE of 13.73%) showed a higher PCE than the benchmark PM7:IT-4F. The improved performance of PBDT-S-BZ well correlates with its improved charge mobility, well-interdigitated surface morphology, and high miscibility with a low Flory-Huggins interaction parameter (1.253). Thus, we successfully established a correlation between the end group engineering and bulk properties of the new polymers for realizing the high performance of halogen-free nonfullerene organic solar cells.

Recent Progress in the Design of Fused-Ring Non-Fullerene Acceptors-Relations between Molecular Structure and Optical, Electronic, and Photovoltaic Properties

Organic solar cells are on the dawn of the next era. The change of focus toward non-fullerene acceptors has introduced an enormous amount of organic n-type materials and has drastically increased the power conversion efficiencies of organic photovoltaics, now exceeding 18%, a value that was believed to be unreachable some years ago. In this Review, we summarize the recent progress in the design of ladder-type fused-ring non-fullerene acceptors in the years 2018-2020. We thereby concentrate on single layer heterojunction solar cells and omit tandem architectures as well as ternary solar cells. By analyzing more than 700 structures, we highlight the basic design principles and their influence on the optical and electrical structure of the acceptor molecules and review their photovoltaic performance obtained so far. This Review should give an extensive overview of the plenitude of acceptor motifs but will also help to understand which structures and strategies are beneficial for designing materials for highly efficient non-fullerene organic solar cells.

Unfused Nonfullerene Acceptors Based on Simple Dipolar Merocyanines

Merocyanine (MC) dyes exhibit facile synthesis and attractive optical properties, making them widely studied as the donor materials in organic solar cells (OSCs). In this study, for the first time, simple indole-based MCs are successfully designed as unfused nonfullerene acceptors (NFAs) for OSCs by forming dimers with A-D-π-D-A structure, which possess enhanced photostability compared to the well-known ITIC acceptor and high electron mobility in blend films. When blended with P3HT donor, one of the dimers, i. e. Z2, shows a good cell efficiency of 3.53 %, which outperforms the performance of most of P3HT/NFA blends, particularly for unfused systems, and thus indicates good potential of simple MCs as NFAs.