A NiCo-MOF nanosheet array based electrocatalyst for the oxygen evolution reaction

MOFSynth: A Computational Tool toward Synthetic Likelihood Predictions of MOFs

In the past decade, high-throughput computational studies of materials have increased significantly mainly due to advances in computer capabilities and have attracted a great deal of interest. In the field of metal-organic frameworks (MOFs), over a million hypothetical MOFs have been designed in silico, yet only a small fraction of these have been synthesized. For validating the computational-hypothetical results and accelerating the progress in the field, there is a pressing need for distinguishing MOFs that are more likely to be synthesized for real-life applications. This study presents a comprehensive investigation into the synthesizability likelihood of MOFs, utilizing a novel computational approach based on the disparities in energy and geometry between the linker conformation within the MOF structure and its isolated, free-gas state since both of these have been proven to be critical factors influencing MOF synthesis. Our user-friendly tool streamlines synthesizability evaluation, requiring minimal expertise in computational chemistry. By deconstructing over 40,000 MOFs from databases, including QMOF, CoRE MOF, and ToBaCCo, we analyze key parameters defining the linker strain within the MOF unit cell. Our results indicate that QMOF and CoRE MOF contain more promising candidates for synthesis, while ToBaCCo exhibits a relatively poor synthesizability likelihood due to unoptimized materials. Through extensive analysis, we identify optimal linker candidates for highly synthesizable MOFs. Consistent trends in energy distribution across databases that are confirmed by high Pearson and Spearman coefficients suggest the potential for omitting optimization calculations, significantly reducing computational costs. This study underscores the importance of linker deformation and energy disparities and enhances our understanding of synthetic accessibility in MOF research, offering valuable insights for future advancements in the field.

Polyoxometalate-encapsulated metal-organic frameworks for photocatalytic uranium isolation

Recycling uranium (U) via adsorption and controlled conversion is crucial for the sustainable development of nuclear energy, in which photocatalytic reduction of U(vi) from aqueous solutions is considered one of the most effective strategies. The primary challenge in the photocatalytic elimination of U(vi) resides in the demand for photocatalysts with exceptional properties for effective U(vi) adsorption and charge separation. Herein, we developed the hybrids of polyoxometalate@Cu-metal-organic frameworks (POM@Cu-MOFs) through a self-assembly strategy and demonstrated the efficient removal of U(vi) via synergistic adsorption and photocatalysis. The abundant oxygen-rich groups in POM served as the adsorption sites, endowing POM@Cu-MOFs with a remarkable removal capacity (1987.4 mg g-1 under light irradiation) to remove 99.4% of UO2 2+. The attraction of electrons from Cu atoms within Cu-MOFs effectively accelerated the carrier dynamics due to their pronounced electronegativity. A mechanism associated with the synergetic effects of adsorption and photocatalytic reduction of U(vi) was proposed. This work provides a feasible approach for efficiently eliminating U(vi) from aqueous solutions in environmental pollution cleanup using the POM@Cu-MOF photocatalyst.

Layered MOF supported on 2D delaminated MXene (Mo2Ti2C3) nanosheets boosted water splitting

Metal organic frameworks (MOFs) have a porous structure, high surface area, and high charge transfer, and they have been regarded as model electrocatalysts. Optimization of the electrocatalytic activity of MOFs is challenging, and an effective strategy for this optimization is the construction of a well-defined interfacial bond bridge. In this work, an in situ approach of composite synthesis is reported for MOF (CoNiNH2BDC) with MXenes (Mo2Ti2C3), as the electrocatalytic properties of MOF can be greatly enhanced with the incorporation of the conductive material MXene. The prepared composite material was characterized thoroughly using XRD, XPS, FESEM, EDX, TEM, and BET. The synergistic effect of both components of this composite material resulted in enhanced conductivity and the number of active sites, which led to enhanced electrocatalytic performance. The CoNiNH2BDC MOF with different ratios of Mo2Ti2C3 MXene were synthesized, and the resulting materials were evaluated for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) activities. It was observed that the MOFMX3 attained a 10 mA cm-2 current density at 1.44 V for OER and -0.037 V for HER (vs. RHE), and lower values of Tafel slopes of 44.8 mV dec-1 for OER and 45 mV dec-1 for HER in 0.1 M KOH were achieved. The higher double layer capacitance (C dl) values lead to high electrochemical surface area (ECSA) values. Lower Tafel slope values for MOFMX3 show that the presence of MXene nanosheets in the hybrid provides support to the layered and porous configuration of MOF, and the chances of the interaction of electrolyte to the catalytically active sites are significantly enhanced. This work highlights the idea of growing bimetallic MOFs on Mo2Ti2C3 MXene using an interdiffusion reaction strategy and opens up an avenue for designing highly electrocatalytic systems.

Bimetallic NiCo@C with a Hollow Sea Urchin Structure Enables Li-S Batteries to Hasten the Reaction Kinetics and Effectively Inhibit the Shuttling of Polysulfides

The "shuttle effect" and several issues related to it are seen as "obstacles" to the study and development of lithium-sulfur batteries (LSBs). This work aims at finding how to fully expose bimetallic sites and quicken the battery reaction kinetics. Here, a bimetallic NiCo-MOF and its derivative NiCo@C with a hollow sea urchin structure are produced. The obtained NiCo@C possesses a micromesoporous structure and fully disclosed bimetallic active sites because of its distinctive structure. The experimental findings demonstrate that fully exposed bimetallic active sites take on chemical adsorbents and collaborate with micromesopores as physical constraints to effectively suppress the "shuttle effect". Furthermore, the hollow sea urchin structure of NiCo@C enables a highly conductive grid, which provides channels to facilitate the movement of solvated Li+. Thanks to these advantages, the NiCo@C-based sulfur cathode offers a high initial discharge specific capacity of 924.41 mAh g-1 at 0.1 C and sustains 390.35 mAh g-1 discharge specific capacity after 100 cycles. The quick transfer of solvated lithium ions (DLi+ = 1.81 × 10-8 cm2 s-1) enables the battery to still contribute a discharge specific capacity of 367.54 mAh g-1 at 1 C. This work provides a new understanding for the structural design of positive electrodes in LSBs.

Control Morphology and Biological Properties of HKUST-1 MOFs Using an Ultrasound-Assisted Approach

The synthesis of bioinspired metal-organic frameworks (MOFs) performed in mild conditions with a high quality is greatly demanded. Moreover, the influence of the morphology and structure of bio-MOFs on the cell interaction and toxicity is important to determine. In this work, we developed an ultrasound (US)-assisted synthesis of HKUST-1 MOFs under mild conditions and investigated the influence of the parameters of synthesis on the morphology, structure, and biological properties of the developed MOFs. It was found that the US power, reaction time, temperature, and type of solvent composition would affect the morphology, size, and yield of the obtained crystals. Employing the optimal synthetic conditions, five types of HKUST-1 MOFs were prepared, achieving highest yields (67.8-96.2%) and different morphologies (octahedral, dodecahedral, icosahedral). The relationship between the morphological features and biological properties of developed bio-MOFs was evaluated and discussed. The cellular association and cytotoxicity of MOF@US and MOF@US-PARG were studied on various cell cultures, i.e. normal mouse embryonic fibroblasts (MEF NF2), chronic myeloid leukemia (K562), and mouse melanoma (B16-F10). The experimental results showed that MOF@US-PARG has a higher percentage of association compared to MOF@US. It has also been shown that the cytotoxicity depends on the concentration and surface modification of the developed MOFs.

Rise of Metal-Organic Frameworks: From Synthesis to E-Skin and Artificial Intelligence

Metal-organic frameworks (MOFs) have attained broad research attention in the areas of sensors, resistive memories, and optoelectronic synapses on the merits of their intriguing physical and chemical properties. In this review, recent progress on the synthesis of MOFs and their electronic applications is introduced and discussed. Initially, the crystal structures and properties of MOFs encompassing optical, electrical, and chemical properties are discussed in brief. Subsequently, advanced synthesis methods for MOFs are introduced, categorized into hydrothermal approach, microwave synthesis, mechanochemical synthesis, and electrochemical deposition. After that, the various roles of MOFs in widespread applications, including sensing, information storage, optoelectronic synapses, machine learning, and artificial intelligence, are discussed, highlighting their versatility and the innovative solutions they provide to long-standing challenges. Finally, an outlook on remaining challenges and a future perspective for MOFs are proposed.

Photocatalyst Au@Ni-MOFs with Different Plasmonic Coverages for Improved Hydrogen Evolution from Water

Plasmonic materials are fundamental photosensitizer materials for photocatalytic reactions. Various structures, including core-shell types, satellite types, and distribution types, have been designed and prepared for the optimization of photocatalytic reactions. However, understanding the profound enhancement mechanism of various structures is still challenging. Thus, the plasmonic coverage is considered to be an index for analyzing the influence mechanism. Here, Au@Ni-MOF core-shell flower sphere-like photocatalysts are prepared, and the size of the flower sphere can be precisely regulated by varying the amount of Au. Thus, different plasmonic coverages are realized through the tuning of spheres of different sizes. The high plasmonic coverage of catalysts can enhance visible light absorption, facilitate the generation of photogenerated electron-hole pairs, and shorten the photogenerated carrier transport distance. Moreover, the exponential relationship between the photocatalytic hydrogen production performance and the plasmonic coverage can also be used as a guide for material design. As a result, a photocatalytic hydrogen production rate of 3389 μmol·g-1·h-1 is achieved in the Au@Ni-MOF sample with high plasmonic coverage, which will advance the plasmonic application in photocatalytic reactions.

Bimetallic NiCo Metal-Organic Frameworks with High Stability and Performance Toward Electrocatalytic Oxidation of Urea in Seawater

The urea oxidation reaction (UOR) is an alternative anodic reaction for hydrogen generation via water splitting. The significance of UOR lies in both H2 production and the decontamination of urea-containing wastewater. Commercial electrocatalysts in this field are generally based on noble metals and show several limitations. Bimetal-organic frameworks (BMOFs) can be excellent candidates for the replacement of noble-metal-based catalysts beacuse of their promising features, such as a tunable structure, high surface area, and abundant sites for electrocatalysis. In this study, a series of nickel-cobalt BMOFs (Nix-Coy-BMOFs: x and y refer to a molar fraction of Ni and Co) were synthesized and applied as electrocatalysts in UOR. In particular, a Ni0.15Co0.85-MOF material with a structure similar to that of its parent Co-MOF, revealed exceptional electrocatalytic performance, as evidenced by low values of overpotential (1.33 V vs RHE at 10 mA cm-2), TOF (0.47 s-1), and Tafel slope (125 mV dec-1). At a 40 mA cm-2 current density, Ni0.15Co0.85-MOF also showed excellent stability during the 72 h tests. This performance of NiCo-BMOF can be assigned to the synergistic effect between Co and Ni, abundant active sites, porosity, and a tunable structure, all of which result in an increased reaction rate due to the acceleration of charge and mass transfers. Thus, the present work introduces an efficient noble-metal-free UOR for energy generation from urea-based wastewater.

Microwave-Assisted Ultrafast Synthesis of Bimetallic Nickel-Cobalt Metal-Organic Frameworks for Application in the Oxygen Evolution Reaction

Herein, a series of monometallic Ni-, Co- and Zn-MOFs and bimetallic NiCo-, NiZn- and CoZn-MOFs of formula M2(BDC)2DABCO and (M,M')2(BDC)2DABCO, respectively, (M, M'=metal) with the same pillar and layer linkers 1,4-diazabicyclo[2.2.2]octane (DABCO) and benzene-1,4-dicarboxylate (BDC) were prepared through a fast microwave-assisted thermal conversion synthesis method (MW) within only 12 min. In the bimetallic MOFs the ratio M:M' was 4 : 1. The mono- and bimetallic MOFs were selected to systematically explore the catalytic-activity of their derived metal oxide/hydroxides for the oxygen evolution reaction (OER). Among all tested bimetallic MOF-derived catalysts, the NiCoMOF exhibits superior catalytic activity for the OER with the lowest overpotentials of 301 mV and Tafel slopes of 42 mV dec-1 on a rotating disk glassy carbon electrode (RD-GCE) in 1 mol L-1 KOH electrolyte at a current density of 10 mA cm-2. In addition, NiCoMOF was insitu grown in just 25 min by the MW synthesis on the surface of nickel foam (NF) with, for example, a mass loading of 16.6 mgMOF/gNF, where overpotentials of 313 and 328 mV at current densities of 50 and 300 mA cm-2, respectively, were delivered and superior long-term stability for practical OER application. The low Tafel slope of 27 mV dec-1, as well as a low reaction resistance from electrochemical impedance spectroscopy (EIS) measurement (Rfar=2 Ω), confirm the excellent OER performance of this NiCoMOF/NF composite. During the electrocatalytic processes or even before upon KOH pre-treatment, the MOFs are transformed to the mixed-metal hydroxide phase α-/β-M(OH)2 which presents the active species in the reactions (turnover frequency TOF=0.252 s-1 at an overpotential of 320 mV). Compared to the TOF from β-M(OH)2 (0.002 s-1), our study demonstrates that a bimetallic MOF improves the electrocatalytic performance of the derived catalyst by giving an intimate and uniform mixture of the involved metals at the nanoscale.

Activating Excellent Electromagnetic Wave Absorption of Micromorphology-Optimized Cu/C Nanocomposite Fibers via a Metal-Organic Framework Template-Assisted Strategy

Morphological engineering is crucial for conceiving high-efficiency electromagnetic wave (EMW) absorption materials. However, for carbon fiber-based composites, the management of micromorphology is significantly astricted by complex fabrication. It remains highly challenging to clarify the micromorphological influences on the EMW loss mechanism of carbon fiber-based absorption materials. In this work, micromorphology-optimized Cu/C nanocomposite fibers are prepared by virtue of a metal-organic framework (MOF) template-assisted strategy. Through skillfully grafting the morphology-regulation capacity of MOFs onto composite fibers, the Oswald maturation and particle distribution issues of Cu nanoparticles are settled, and the efficient electron transport pathways are established by the bead-like structure of the fiber matrix. Compared to prepared conventional Cu/C nanocomposite fibers, the MOF template-assisted strategy stimulates a remarkable leap in EMW absorption performance. The minimum reflection loss value of Cu/C-40 can reach -64.5 dB, 15.96 times lower than that of a conventional sample (Cu/C-2). The maximum effective absorption bandwidth extends to 6.08 GHz, contrasting the ineffective performance of Cu/C-2. Systematic research demonstrates that the enabled graphite-catalytic function of Cu nanoparticles collaborated with an optimized conductive network structure plays a pivotal role in creating field-induced leakage currents, facilitating conductive loss, the primary contributor to EMW dissipation. This work establishes a correlation mechanism between micromorphology and EMW loss, presenting a compelling example of customizable carbon fiber-based absorbers.

Extra-High CO2 Adsorption and Controllable C2H2/CO2 Separation Regulated by the Interlayer Stacking in Pillar-Layered Metal-Organic Frameworks

Pillar-layered metal-organic frameworks (PLMOFs) are promising gas adsorbents due to their high designability. In this work, high CO2 storage capacity as well as controllable C2H2/CO2 separation ability are acquired by rationally manipulating the interlayer stacking in pillar-layered MOF materials. The rational construction of pillar-layered MOFs started from the 2D Ni-BTC-pyridine layer, an isomorphic structure of pioneering MOF-1 reported in 1995. The replacement of terminal pyridine groups by bridging pyrazine linkers under optimized solvothermal conditions led to three 3D PLMOFs with different stacking types between adjacent Ni-BTC layers, named PLMOF 1 (ABAB stacking), PLMOF 2 (AABB stacking), and PLMOF 3 (AAAA stacking). Regulated by the layer arrangements, CO2 and C2H2 adsorption capacities (273 K and 1 bar) of PLMOFs 1-3 vary from 173.0/153.3, 185.0/162.4, to 203.5/159.5 cm3 g-1, respectively, which surpass the values of most MOF adsorbents. Dynamic breakthrough experiments further indicate that PLMOFs 1-3 have controllable C2H2/CO2 separation performance, which can successfully overcome the C2H2/CO2 separation challenge. Specially, PLMOFs 1-3 can remove trace CO2 (3%) from the C2H2/CO2 mixture and produce high-purity ethylene (99.9%) in one step with the C2H2 productivities of 1.68, 2.45, and 3.30 mmol g-1, respectively. GCMC simulations indicate that the superior CO2 adsorption and unique C2H2/CO2 separation performance are mainly ascribed to different degrees of CO2 agglomeration in the ultramicropores of these PLMOFs.

Morphology Control of Mixed Metallic Organic Framework for High-Performance Hybrid Supercapacitors

The study presents the binder-free synthesis of mixed metallic organic frameworks (MMOFs) supported on a ternary metal oxide (TMO) core as an innovative three-dimensional (3D) approach to enhance electron transport and mass transfer during the electrochemical charge-discharge process, resulting in high-performance hybrid supercapacitors. The research demonstrates that the choice of organic linkers can be used to tailor the morphology of these MMOFs, thus optimizing their electrochemical efficiency. Specifically, a NiCo-MOF@NiCoO2@Ni electrode, based on terephthalic linkers, exhibits highly ordered porosity and a vast internal surface area, achieving a maximum specific capacity of 2320 mC cm-2, while maintaining excellent rate capability and cycle stability. With these performances, the hybrid supercapacitor (HSC) achieves a maximum specific capacitance of 424.6 mF cm-2 (specific capacity 653.8 mC cm-2) and 30.7 F cm-3 with energy density values of 10.1 mWh cm-3 at 167.4 mW cm-3 (139.8 µWh cm-2 at 2310 µW cm-2), which are higher than those of previously reported MMOFs based electrodes. This research introduces a novel approach for metal organic framework based HSC electrodes, diverging from the traditional emphasis on metal ions, in order to achieve the desired electrochemical performance.

Boosting Electrocatalytic N2 Reduction to NH3 by Enhancing N2 Activation via Interaction between Au Nanoparticles and MIL-101(Fe) in Neutral Electrolytes

Electrocatalytic nitrogen reduction reaction (NRR) has attracted much attention as a sustainable ammonia production technology, but it needs further exploration due to its slow kinetics and the existence of competitive side reactions. In this research, xAu/MIL-101(Fe) catalysts were obtained by loading gold nanoparticles (Au NPs) onto MIL-101(Fe) using a one-step reduction strategy. Herein, MIL-101(Fe), with high specific surface area and strong N2 adsorption capacity, is used as a support to disperse Au NPs to increase the electrochemical active surface area. Au NPs, with a high NRR activity, is introduced as the active site to promote charge transfer and intermediate formation rates. More importantly, the strong interaction between Au NPs and MIL-101(Fe) enhances the electron transfer between Au NPs and MIL-101(Fe), thereby enhancing the activation of N2 and achieving efficient NRR. Among the prepared catalysts, 15 %Au/MIL-101(Fe) has the highest NH3 yield of 46.37 μg h-1 mg-1 cat and a Faraday efficiency of 39.38 % at -0.4 V (vs. RHE). In-situ FTIR reveals that the NRR mechanism of 15 %Au/MIL-101(Fe) follows the binding alternating pathway and also indicates that the interaction between Au NPs and MIL-101(Fe) strengthens the activation of the N≡N bond in the rate-limiting process, thereby accelerating the NRR process.

Quasi-type-II Cu-In-Zn-S/Ni-MOF heterostructure with prolonged carrier lifetime for photocatalytic hydrogen production

Visible-driven photocatalytic hydrogen production using narrow-bandgap semiconductors has great potential for clean energy development. However, the widespread use of these semiconductors is limited due to problems such as severe charge recombination and slow surface reactions. Herein, a quasi-type-II heterostructure was constructed by combining bifunctional Ni-based metal-organic framework (Ni-MOF) nanosheets with BDC (1,4-benzenedicarboxylic acid) linker coupled with Cu-In-Zn-S quantum dots (CIZS QDs). This heterostructure exhibited a prolonged charge carrier lifetime and abundant active sites, leading to significantly improved hydrogen production rate. The optimized rate achieved by the CIZS/Ni-MOF heterostructure was 2642 μmol g-1 h-1, which is 5.28 times higher than that of the CIZS QDs. This improved performance can be attributed to the quasi-type-II band alignment between the CIZS QDs and Ni-MOF, which facilitates effective delocalization of the photogenerated electrons within the system. Additional photoelectrochemical tests confirmed the well-maintained photoluminescence and prolonged charge carrier lifetime of the CIZS/Ni-MOF heterostructure. This study provides valuable insights into the use of multifunctional MOFs in the development of highly efficient composite photocatalysts, extending beyond their role in light harvesting and charge separation.

Shape-Preserved CoFeNi-MOF/NF Exhibiting Superior Performance for Overall Water Splitting across Alkaline and Neutral Conditions

This study reported a multi-functional Co0.45Fe0.45Ni0.9-MOF/NF catalyst for oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and overall water splitting, which was synthesized via a novel shape-preserving two-step hydrothermal method. The resulting bowknot flake structure on NF enhanced the exposure of active sites, fostering a superior electrocatalytic surface, and the synergistic effect between Co, Fe, and Ni enhanced the catalytic activity of the active site. In an alkaline environment, the catalyst exhibited impressive overpotentials of 244 mV and 287 mV at current densities of 50 mA cm-2 and 100 mA cm-2, respectively. Transitioning to a neutral environment, an overpotential of 505 mV at a current density of 10 mA cm-2 was achieved with the same catalyst, showing a superior property compared to similar catalysts. Furthermore, it was demonstrated that Co0.45Fe0.45Ni0.9-MOF/NF shows versatility as a bifunctional catalyst, excelling in both OER and HER, as well as overall water splitting. The innovative shape-preserving synthesis method presented in this study offers a facile method to develop an efficient electrocatalyst for OER under both alkaline and neutral conditions, which makes it a promising catalyst for hydrogen production by water splitting.

Elucidating the performance of hexamethylene tetra-amine interlinked bimetallic NiCo-MOF for efficient electrochemical hydrogen and oxygen evolution

Bimetallic metal-organic frameworks (MOFs) play a significant role in the electrocatalysis of water due to their large surface area and availability of increased numbers of pores. For the inaugural time, we examine the effectiveness of a hexamethylene tetra-amine (HMT)-induced 3D NiCo-MOF-based nanostructure as a potent bifunctional electrocatalyst with superior performance for overall water splitting in alkaline environments. The structural, morphological, and electrochemical properties of the as-synthesized bifunctional catalyst were examined thoroughly before analyzing its behavior towards electrochemical water splitting. The HMT-based NiCo-MOF demonstrated small overpotential values of 274 mV and 330 mV in reaching a maximum current density of 30 mA cm-2 for hydrogen and oxygen evolution mechanisms, respectively. The Tafel parameter also showed favorable HER/OER reaction kinetics, with slopes of 78 mV dec-1 and 86 mV dec-1 determined during the electrochemical evaluation. Remarkably, the NiCo-HMT electrode exhibited a double-layer capacitance of 4 mF cm-2 for hydrogen evolution and 23 mF cm-2 for oxygen evolution, while maintaining remarkable stability even after continuous operation for 20 hours. This research offers a valuable blueprint for implementing a cost-effective and durable MOF-based bifunctional catalytic system that has proven to be effective for complete water splitting. Decomposition of water under higher current densities is crucial for effective long-term generation and commercial consumption of hydrogen.

Metal-Organic-Framework-Based Nanoarrays for Oxygen Evolution Electrocatalysis

The development of highly active and stable electrode materials for the oxygen evolution reaction (OER) is essential for the widespread application of electrochemical energy conversion systems. In recent years, various metal-organic frameworks (MOFs) with self-supporting array structures have been extensively studied because of their high porosity, abundant metal sites, and flexible and adjustable structures. This review provides an overview of the recent progress in the design, preparation, and applications of MOF-based nanoarrays for the OER, beginning with the introduction of the architectural advantages of the nanoarrays and the characteristics of MOFs. Subsequently, the design principles of robust and efficient MOF-based nanoarrays as OER electrodes are highlighted. Furthermore, detailed discussions focus on the composition, structure, and performance of pristine MOF nanoarrays (MOFNAs) and MOF-based composite nanoarrays. On the one hand, the effects of the two components of MOFs and several modification methods are discussed in detail for MOFNAs. On the other hand, the review emphasizes the use of MOF-based composite nanoarrays composed of MOFs and other nanomaterials, such as oxides, hydroxides, oxyhydroxides, chalcogenides, MOFs, and metal nanoparticles, to guide the rational design of efficient OER electrodes. Finally, perspectives on current challenges, opportunities, and future directions in this research field are provided.

Terrace-Like 2D Hierarchically Porous Iron/Cobalt Metal-Organic Framework: Ambient Fast Synthesis and Efficient Oxygen Evolution Reaction Application

It is urgent to design a low-cost electrocatalyst with high activity to enhance the efficiency of oxygen evolution reaction (OER), which is limited by the slow four-electron transfer kinetics process. Nevertheless, traditional synthetic methods, including calcination and solvothermal, of the electrocatalysts are high-cost, low-yield, and energy-hogging, which limits their industrial application. Herein, an ambient fast synthetic method is developed to prepare terrace-like Fe/Co bimetal-organic framework (TFC-MOF) electrocatalyst materials in gram scale in 1 h. The method in this paper is designable based on coordination chemistry. Fe and Co ions can coordinate with the carboxyl groups on benzene-1,3,5-tricarboxylic acid (H3 BTC) to form a 2D-MOF structure. Structural characterizations, including SEM, TEM, and XRD are conducted to verify that the TFC-MOF is a terrace-like layered structure with uniform-sized mesoporous, which reduces the adsorption steric hindrance and facilitates the mass and electron transfer efficiency of OER. The TFC-MOF shows low overpotential, 255 mV at a current density of 10 mA cm-2 , and a low Tafel slope of 49.9 mV dec-1 , in an alkaline solution. This work provides a planar coordination strategy to synthesize 2D-MOF OER electrocatalyst on a large scale with low cost and low energy consumption, which will promote its practical OER applications.

Improving the Sulfurophobicity of the NiS-Doping CoS Electrocatalyst Boosts the Low-Energy-Consumption Sulfide Oxidation Reaction Process

Producing sulfur from a sulfide oxidation reaction (SOR)-based technique using sulfide aqueous solution has attracted considerable attention due to its ecofriendliness. This study demonstrates that NiS-doped cobalt sulfide NiS-CoS-supported NiCo alloy foam can deliver the SOR with superior electrocatalytic activity and robust stability compared to reported non-noble metal-based catalysts. Only 0.34 V vs RHE is required to drive a current density of 100 mA cm-2 for the SOR. According to the experiment, the catalyst exhibits a unique sulfurophobicity feature because of the weak interaction between sulfur and the transition metal sulfide (low affinity for elemental sulfur), preventing electrode corrosion during the SOR process. More impressively, the chain-growth mechanism of the SOR from short- to long-chain polysulfides was revealed by combining electrochemical and spectroscopic in situ methods, such as in situ ultraviolet-visible and Raman. It is also demonstrated that electrons can transfer straight from the sulfion (S2-) to the active site on the anode surface during the low-energy-consumption SOR process. This work provides new insight into simultaneous energy-saving hydrogen production and high-value-added S recovery from sulfide-containing wastewater.

Rapid cold plasma synthesis of cobalt metal-organic framework/reduced graphene oxide nanocomposites for use as supercapacitor electrodes

Metal-organic frameworks (MOFs) are recognized as a desirable class of porous materials for energy storage applications, despite their limited conductivity. In the present study, Co-MOF-71 was fabricated as a high-performance supercapacitor electrode at ambient temperature using a fast and straightforward, one-pot cold plasma method. A supercapacitor electrode based on Co-MOF@rGO was also synthesized by adding reduced graphene oxide (rGO) during processing to increase the capacitance retention and stability after 4000 cycles from 80 to 95.4%. The Co-MOF-71 electrode provided a specific capacitance (Cs) of 651.7 Fg-1 at 1 Ag-1, whereas the Co-MOF@rGO electrode produced a Cs value of 967.68 Fg-1 at 1 Ag-1. In addition, we fabricated an asymmetric device (Co-MOF@rGO||AC) using Co-MOF-rGO as a high-rate positive electrode and activated carbon (AC) as a negative electrode. This hybrid device has a remarkable specific energy and power density. The combination of MOFs with reduced graphene oxide (rGO) in a cold plasma environment resulted in the formation of a three-dimensional nanostructure composed of nanosheets. This nanostructure exhibited an increased number of electroactive sites, providing benefits for energy storage applications.

Construction of Well-Defined Two-Dimensional Architectures of Trimetallic Metal-Organic Frameworks for High-Performance Symmetric Supercapacitors

The high surface-to-volume ratio and extraordinarily large-surface area of two-dimensional (2D) metal-organic framework (MOF) architectures have drawn particular interest for use in supercapacitors. To achieve an excellent electrode material for supercapacitors, well-defined 2D nanostructures of novel trimetallic MOFs were developed for supercapacitor applications. Multivariate MOFs (terephthalate and trimesate MOF) with distinctive nanobrick and nanoplate-like structures were successfully synthesized using a straightforward one-step reflux condensation method by combining Ni, Co, and Zn metal species in equimolar ratios with two different ligands. Furthermore, the effects of the tricarboxylic and dicarboxylic ligands on cyclic voltammetry, charge-discharge cycling, and electrochemical impedance spectroscopy were studied. The derived terephthalate and trimesate MOFs are supported with stainless-steel mesh and provide a suitable electrolyte environment for rapid faradaic reactions with an elevated specific capacity, excellent rate capability, and exceptional cycling stability. It shows a specific capacitance of 582.8 F g-1, a good energy density of 40.47 W h kg-1, and a power density of 687.5 W kg-1 at 5 mA cm-2 with an excellent cyclic stability of 92.44% for 3000 charge-discharge cycles. A symmetric BDC-MOF//BDC-MOF supercapacitor device shows a specific capacitance of 95.22 F g-1 with low capacitance decay, high energy, and power densities which is used for electronic applications. These brand-new trimetallic MOFs display outstanding electrochemical performance and provide a novel strategy for systematically developing high-efficiency energy storage systems.

One-Step Electrodeposition of a Mesoporous Ni/Co-Imidazole-Based Bimetal-Organic Framework on Pyramid-like NiSb with Abundant Coupling Interfaces as an Ultra-Stable Heterostructural Electrocatalyst for Water Splitting

The exploration of highly efficient metal-organic framework (MOF)-based electrocatalysts is a research topic of high significance owing to their potential applications in sustainable and clean energy production. Herein, a mesoporous MOF containing Ni and Co nodes along with 2-methylimidazole (Hmim) ligands has been directly grown on the surface of the pyramid-like NiSb through a convenient cathodic electrodeposition strategy and evaluated as the catalyst for water splitting catalysis. Tailoring catalytically active sites through porous well-arranging architecture and the coupled interface offers a catalyst with exquisite performance that displays ultra-low Tafel constant of 33 and 42 mV dec^-1 toward the hydrogen evolution reaction and oxygen evolution reaction, sequentially, and also enhanced durability at high current densities over 150 h in a 1 M KOH medium. The success of the synthesized NiCo-MOF@NiSb@GB electrode is explained by the intimate contact between the NiCo-MOF and NiSb with well-tailored phase interfaces, the positive coupling effect between Ni and Co metal centers in the MOF, and the porous structure with abundant active sites toward electrocatalysis. Importantly, the present work provides a new technical reference for the electrochemical synthesis of heterostructural MOFs as a promising candidate for energy-related applications.

Introduction of a new and safe synthesis procedure for Ni-MOF-I in aqueous solution and its application for the extraction of some pesticides from different beverages

For the first time, this research introduces an analytical application of Ni-MOF-I, which was used as an adsorbent in a dispersive micro solid phase extraction procedure followed by dispersive liquid-liquid microextraction for the extraction and preconcentration of seven pesticides from different fruit juices. Also, Ni-MOF-I was synthesized by a new and green method with many advantages over the previously published synthesis procedures. For example, effortless and green synthesis, no need for autoclaves and ovens, and elimination of organic solvent usage are the main highlights. The synthesized Ni-MOF-I was characterized by applying nitrogen adsorption/desorption, energy-dispersive X-ray, scanning electron microscopy, Fourier transform infrared spectrophotometry, and X-ray diffraction analyses. The studied pesticides were extracted and preconcentrated by the proposed method. Then, the extracted analytes in the sedimented organic phase were injected into a gas chromatography-flame ionization detector. Acceptable analytical results such as low limits of detection (0.15-0.60 μg L-1) and quantification (0.50-2.0 μg L-1), reasonable extraction recoveries (51-80%), high enrichment factors (255-400), satisfactory relative standard deviation values of 4.8-7.2% (intra-day precision, n = 6) and 5.3-7.5% (inter-day precision, n = 4), and wide linear ranges were obtained. The proposed method can be introduced as an effective analytical technique based on Ni-MOF-I for the analysis of different pesticides in fruit beverages.

Ni/Co/Co3O4@C nanorods derived from a MOF@MOF hybrid for efficient overall water splitting

The design of nanostructured materials for efficient bifunctional electrocatalysts has gained tremendous attention, yet developing a fast and effective synthesis strategy remains a challenge. Here, we present a fast and scalable synthetic method of Ni/Co/Co₃O₄@C nanorods for efficient overall water splitting. Using microwave synthesis, we first produced a unique Ni-MOF@Co-MOF in a few minutes. Subsequently, we transformed the MOF@MOF into hybrid Ni/Co/Co₃O₄ nanoparticles covered with graphitic carbon in a few seconds using laser-scribing. The prepared bimetallic catalysts showed remarkably low overpotentials of 246 mV for the oxygen evolution reaction (OER) and 143 mV for the hydrogen evolution reaction (HER) at a current density of 30 mA cm^-2. An electrolyzer assembled with the bimetallic catalysts delivered a high current density of 20 mA cm^-2 at a voltage of 1.6 V and exhibited good durability (nearly 91.6% retention even after a long-running operation of 24 h at a voltage of 1.52 V). Our proposed method could serve as a powerful method for creating various multimetallic hybrid nanocatalysts with unique hierarchical structures from diverse MOFs.

Ultrathin trimetallic metal-organic framework nanosheets for accelerating bacteria-infected wound healing

Bacteria-infected wounds are commonly regarded as a hidden threat to human health that can create persistent infection and even bring about amputation or death. Two-dimensional metal-organic frameworks (2D MOFs) with biomimetic enzyme activity have been used to reduce the huge harm caused by antibiotic resistance due to their massive active sites and ultralarge specific surface area. However, their therapeutic efficiency is unsatisfactory because of their relatively low catalytic activity and poor productivity. In this paper, we presented a simple and mild one-pot solution phase method for the large-scale synthesis of NiCoCu-based MOF nanosheets. The NiCoCu nanosheets (denoted as (Ni₂Co₁)_1-xCu_x) with controlled molar ratios have different morphologies and sizes. Specifically, the (Ni₂Co₁)_0.5Cu_0.5 nanosheets showed the best catalytic performance toward the reduction of H₂O₂ and H₂O₂ was efficiently catalyzed to generate toxic •OH in the presence of MOF nanosheets with peroxidase-like activity. (Ni₂Co₁)_0.5Cu_0.5 exhibited the best antibacterial activity against gram-positive Escherichia coli and methicillin-resistant Staphylococcus aureus bacteria. Animal wound healing experiments demonstrate that ultrathin trimetallic nanosheets can effectively contribute to wound healing with excellent biocompatibility. This study reveals the immense potential of ultrathin trimetallic MOF nanosheets for clinical antibacterial therapy for future pragmatic clinical applications.

Conductive Co-triazole metal-organic framework exploited as an oxygen evolution electrocatalyst

A Co-triazole metal-organic framework (Co-trz) endowed with electrical conductivity was synthesized effortlessly via a microwave-based method. Providing a high density of catalytic centers with electrically conductive features, as suggested by DFT calculations, the framework exhibited a low overpotential for the oxygen evolution reaction (OER) with good kinetics. A mechanistic reaction pathway was proposed based on monitoring alterations in the oxidation state and local coordination environment of Co centers upon the occurrence of the OER. Due to its performance and its chemical and electrochemical robustness, the framework was highlighted as a promising MOF electrocatalyst for the OER.

Ultrathin Two-Dimensional Bimetal-Organic Framework Nanosheets as High-Performance Electrocatalysts for Benzyl Alcohol Oxidation

Ultrathin two-dimensional metal-organic frameworks (2D MOFs) have the potential to improve the oxidation of benzyl alcohol (BA) with a large surface area and open catalytic active sites. To achieve high-efficiency electrocatalysts for the oxidation of benzyl alcohol, a moderate solvothermal method was evolved to synthesize a series of 2D MOFs on nickel foam (Ni-MOF/NF, NiCo-61-MOF/NF, NiCo-21-MOF/NF). As the electrocatalyst used for the oxidation of benzyl alcohol, NiCo-61-MOF/NF presented a lower overpotential and superior chemical durability than other electrocatalysts; it only required a potential of ∼1.52 V (vs RHE) to reach 338.16 mA cm^-2, with an oxidation efficiency of more than 86%. Besides, after continuous electrocatalysis for 20 000 s at 1.42 V (vs RHE), the current density of NiCo-61-MOF/NF nanosheets was still 38.67 mA cm^-2 with 77.34% retention. This demonstrated that NiCo-61-MOF/NF nanosheet electrocatalysts had great potential for benzyl alcohol oxidation. From both the experimental and theoretical studies, it was discovered that NiCo-61-MOF/NF nanosheets have the highest electrocatalytic activity due to their distinctive ultrathin 2D structure, optimized electron structure, and more accessible active sites. This finding would pave a brand-new thought for the design of electrocatalysts with electrocatalytic activity for benzyl alcohol oxidation (EBO).

Controllable In Situ Transformation of Layered Double Hydroxides into Ultrathin Metal-Organic Framework Nanosheet Arrays for Energy Storage

Ultrathin two-dimensional metal-organic frameworks (MOFs) have convincing performances in energy storage, which can be put down to their accessible active sites with rapid charge transfer. Herein, NiCo-layered double hydroxide (LDH) nanosheet arrays are used as self-sacrificial templates to in situ fabricate ultrathin NiCo-MOF nanosheet arrays on Ni foam (NS/NF) by using organic ligands without adding metal sources. Two ultrathin MOF nanosheets with different ligands, terephthalate (BDC) and 2-aminoterephthalate (NH₂-BDC), are synthesized, characterized, and discussed in detail. Specifically, NiCo-NH₂-BDC-MOF NS/NF exhibits the best electrochemical performance as a battery-type electrode for supercapacitors, achieves an areal capacitance of 12.13 F cm^-2 at a current density of 2 mA cm^-2, and retains the original capacitance of 73.08 % after 5000 cycles at a current density of 50 mA cm^-2. Furthermore, when NiCo-NH₂-BDC-MOF NS/NF is assembled with activated carbon (AC) to form an asymmetric supercapacitor (ASC), an energy density of 0.81 mWh cm^-2 can be provided at a power density of 1.60 mW cm^-2. These results offer an effective and controllable synthetic strategy to in situ prepare ultrathin MOF nanosheet arrays with different ligands and metal ions from LDH precursors.

Kinetics-Favorable Ultrathin NiCo-MOF Nanosheets with Boosted Pseudocapacitive Charge Storage for Quasi-Solid-State Hybrid Supercapacitors

Bimetallic metal-organic frameworks (MOFs) with an ultrathin configuration are compelling materials for developing high-performance energy storage devices on account of their unique structural merits. Herein, a hydrangea-like NiCo-MOF is well prepared using controllable solvothermal and cation-exchange processes, synchronously achieving bimetallic nodes and hierarchical ultrathin architecture. The structural superiority enables NiCo-MOF of expanded electrons' transfer pathways and multitudinous electrolytes' diffusion channels, resulting in a significant enhancement in pseudocapacitive performance. Coupling with the bimetallic nature and constructional advantages, NiCo-MOF shows superior gravimetric capacity (832.6 C g^-1 at 1 A g^-1) and electrochemical kinetics to those of monometallic Ni-MOF and Co-MOF. Importantly, the quasi-solid-state hybrid supercapacitor (HSC) based on the NiCo-MOF cathode and active carbon (AC) anode delivers a desirable energy density (45.3 Wh kg^-1 at 847.8 W kg^-1), a favorable power density (7160.0 W kg^-1 at 23.3 Wh kg^-1), a remarkable cyclability (82.4% capacity retention over 7000 cycles), and a capability of driving miniature electronics, exhibiting its potential in practical applications. This work presents an efficient design strategy to develop kinetics-favorable MOF materials for energy storage.

A Ce-MOF as an alkaline phosphatase mimic: Ce-OH2 sites in catalytic dephosphorylation

For the first time, a metal–organic framework (Ce-MOF) bearing a Ce–OH2–Ce motif was used to mimic the active sites of alkaline phosphatase.

Formation of NiFe-MOF nanosheets on Fe foam to achieve advanced electrocatalytic oxygen evolution

2D bimetal metal organic frameworks (MOFs) are recognized as one of the most promising electrocatalysts for oxygen evolution reaction (OER). Herein, a facile approach was proposed to construct NiFe-MOF nanosheets...

Experimental and Theoretical Insights into the Borohydride-Based Reduction-Induced Metal Interdiffusion in Fe-Oxide@NiCo2O4 for Enhanced Oxygen Evolution

The oxygen evolution reaction (OER) plays a key role in determining the performance of overall water splitting, while a core technological consideration is the development of cost-effective, efficient, and durable catalysts. Here, we demonstrate a robust reduced Fe-oxide@NiCo₂O₄ bilayered non-precious-metal oxide composite as a highly efficient OER catalyst in an alkaline medium. A bilayered oxide composite film with an interconnected nanoflake morphology (Fe₂O₃@NiCo₂O₄) is reduced in an aqueous NaBH₄ solution, which results in a mosslike Fe₃O₄@NiCo₂O₄ (reduced Fe-oxide@NiCo₂O₄; rFNCO) nanostructured film with an enhanced electrochemical surface area. The rFNCO film demonstrates an outstanding OER activity with an extraordinary low overpotential of 189 mV at 10 mA cm^-2 (246 mV at 100 mA cm^-2) and a remarkably small Tafel slope of 32 mV dec^-1. The film also shows excellent durability for more than 50 h of continuous operation, even at 100 mA cm^-2. Furthermore, density functional theory calculations suggest that the unintentionally in situ doped Ni during the reduction reaction possibly improves the OER performance of the rFNCO catalyst shifting d-band centers of both Fe and Ni active sites.

MoS2 Decoration Followed by P Inclusion over Ni-Co Bimetallic Metal-Organic Framework-Derived Heterostructures for Water Splitting

Demonstrating a highly efficient non-noble bifunctional catalyst for complete water electrolysis remains challenging because of kinetic limitations and crucial importance for future energy harvesting. Herein, a low-cost, integrated composite of a Ni-Co metal-organic framework decorated with thin MoS₂ nanosheets was synthesized by a simple hydrothermal method followed by carbonization and phosphorization for electrochemical oxygen and hydrogen evolution reactions. Such a composite heterostructure exhibits outstanding performance in the electrocatalysis process with a lower overpotential of 184 mV for the oxygen evolution reaction (OER) and 84 mV for the hydrogen evolution reaction (HER) in 1.0 M KOH and 0.5 M H₂SO₄ electrolytes to reach a current density of 10 mA cm^-2, with a slight Tafel slope of 63 mV dec^-1 for the OER and 96 mV dec^-1 for the HER. The obtained results are far better than those of the commercial benchmark catalyst. Furthermore, online gas chromatography quantifies the amount of hydrogen generation in a symmetric cell as equal to 0.002121 moles with an energy efficiency of about 2.237 mg/kWh. Thus, the composite electrode's remarkable performance is further demonstrated as a potentially viable alternative non-noble electrocatalyst for energy conversion reactions.

Adsorption of Co(II) from aqueous solution using municipal sludge biochar modified by HNO3

Here adsorption studies were proposed on a carboxylated sludge biochar (CSB) material modified by HNO₃ to assess its capacity in the removal of cobalt from aqueous solution. The as-prepared sludge biochar material was characterized by Brunauer-Emmett-Teller (BET) analysis, Fourier transform infrared (FT-IR) spectroscopy, thermogravimetric analysis (TGA), energy-dispersive spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS). The isotherm process could be well described by the Langmuir isotherm model. The adsorption kinetics indicated that cobalt adsorption followed a pseudo-second-order kinetics model. The mechanism between Co(II) and biochar involved electrostatic interaction, ion exchange, surface complexation and physical function. The adsorption capacity on CSB was as high as 72.27 mg·g^-1, surpassing original sludge biochar (SB) as CSB had abundant oxygen-containing functional groups and many hydroxyls, plus the BET surface areas increased when SB was modified by HNO₃, which stimulated adsorption effect. Therefore, this work shows that CSB could be used as an efficient adsorbent to remove Co(II) in wastewater.

ZIF-12/Fe-Cu LDH Composite as a High Performance Electrocatalyst for Water Oxidation

Layered double hydroxides (LDH) are being used as electrocatalysts for oxygen evolution reactions (OERs). However, low current densities limit their practical applications. Herein, we report a facile and economic synthesis of an iron-copper based LDH integrated with a cobalt-based metal-organic framework (ZIF-12) to form LDH-ZIF-12 composite (1) through a co-precipitation method. The as-synthesized composite 1 requires a low overpotential of 337 mV to achieve a catalytic current density of 10 mA cm-2 with a Tafel slope of 89 mV dec-1. Tafel analysis further demonstrates that 1 exhibits a slope of 89 mV dec-1 which is much lower than the slope of 284 mV dec-1 for LDH and 172 mV dec-1 for ZIF-12. The slope value of 1 is also lower than previously reported electrocatalysts, including Ni-Co LDH (113 mV dec-1) and Zn-Co LDH nanosheets (101 mV dec-1), under similar conditions. Controlled potential electrolysis and stability test experiments show the potential application of 1 as a heterogeneous electrocatalyst for water oxidation.

In situ assembly of bimetallic MOF composites on IF as efficient electrocatalysts for the oxygen evolution reaction

Since the complicated multiple electron transfer process and slow kinetics in the OER process seriously hinder the electrochemical decomposition of water, it is urgent to design and develop electrocatalysts with excellent performance and superior stability to reduce overpotential and accelerate the reaction dynamics of the OER. Herein, a unique ultra-thin nanosheet bimetal electrocatalyst NiFe-MOF/IF was synthesized by a one-step hydrothermal method, and characterized by SEM, XRD, TEM, and XPS. NiFe-MOF/IF shows superior OER electrocatalytic activity in 1 M KOH electrolyte solution, and an ultralow overpotential of only 230 and 262 mV was required to achieve a current density of 10 and 100 mA cm^-2, respectively, with a relatively small Tafel slope of 30.46 mV dec^-1 for the OER. No obvious degradation of the current density at 10 mA cm^-2 was observed over about 16 h, which indicates the excellent stability of the catalyst. Favourable activity and benign durability of NiFe-MOF/IF can be attributed to the three-dimensional high porosity conductive substrates, in situ growth of MOF nanosheets, bimetallic synergy, and unique layering. This research provides a promising strategy for the application of MOF materials in the field of electrocatalysis.

Assembly of ZIF-67 nanoparticles and in situ grown Cu(OH)2 nanowires serves as an effective electrocatalyst for oxygen evolution

Due to the slow kinetics of oxygen evolution at the anode, the efficiency of electrocatalytic water decomposition is critically reduced, and its large-scale application is severely restricted. Therefore, it is urgent to develop electrocatalysts with excellent performance and stability to accelerate the oxygen evolution reaction (OER) reaction kinetics. Herein, a self-supporting binder-free electrocatalyst was successfully prepared using in situ grown Cu(OH)2 nanowires on CF as the carrier to grow ZIF-67 via a room temperature immersion method. The combination of Cu(OH)2 nanowires and the unique structure of ZIF-67 forms a three-dimensional nanostructured catalyst, in which the unique structure and the existence of synergy may contribute to a larger electrochemical active surface area, expose more electrochemically active sites, adjust the electronic structure, and accelerate the rate of electron transfer, thus greatly improving the electrocatalytic activity and durability for OER. The as-prepared Cu(OH)2@ZIF-67/CF exhibited excellent OER performance under alkaline conditions and required overpotentials of 205 mV and 276 mV to drive current densities of 10 mA cm-2 and 100 mA cm-2, respectively, with a small Tafel slope of 70.5 mV dec-1 for OER. The stability test of Cu(OH)2@ZIF-67/CF at the current density of 10 mA cm-2 displayed excellent stability for 22 h. This study provides a feasible strategy for the rapid preparation of low-cost and efficient electrocatalysts in alkaline media.

NiCo Metal-Organic Framework and Porous Carbon Interlayer-Based Supercapacitors Integrated with a Solar Cell for a Stand-Alone Power Supply System

Nickel cobalt-metal-organic framework (NiCo-MOF), with a semihollow spherical morphology composed of rhombic dodecahedron nanostructures, was synthesized using a scalable and facile wet chemical route. Such a structure endowed the material with open pores, which enabled rapid ion ingress and egress, and the high effective surface area of the MOF allowed the uptake and release of a large number of electrolyte ions during charge-discharge. By combining this NiCo-MOF cathode with a highly porous carbon (PC) anode (derived from the naturally grown and abundantly available bio-waste, namely, palm kernel shells), the resulting PC//NiCo-MOF supercapacitor using an aqueous potassium hydroxide (KOH) electrolyte delivered a capacitance of 134 F g^-1, energy and power densities of 24 Wh kg^-1 and 0.8 kW kg^-1 at 1 A g^-1, respectively, over an operational voltage window of 1.6 V. By employing thin interlayers of PC coated over a Whatman filter paper (PC@FP), the modified supercapacitor configuration of PC/PC@FP//PC@FP/NiCo-MOF delivered greatly enhanced performance. This cell delivered a capacitance of 520 F g^-1 and an energy density of 92 Wh kg^-1, improved by nearly 4-fold, compared to the analogous supercapacitor without the interlayers (at the same power and current densities and voltage window), thus evidencing the role of the cost-effective, electrically conducting porous carbon interlayers in amplifying the supercapacitor's energy storage capabilities. Further, illumination of white light-emitting diodes (LEDs) using a three-series configuration and the photocharging of this supercapacitor with a solution-processed solar cell are also demonstrated. The latter confirms its ability to function as a stand-alone power supply system for electronic/computing devices, which can even operate under medium lighting conditions.