In situ semi-transformation from heterometallic MOFs to Fe-Ni LDH/MOF hierarchical architectures for boosted oxygen evolution reaction

Magnetic CoFe hydrotalcite composite Co metal-organic framework material efficiently activating peroxymonosulfate to degrade sulfamethoxazole: Oxygen vacancy-mediated radical and non-radical pathways

Herein, a novel rich oxygen vacancy (Ov) cobalt-iron hydrotalcite composite cobalt metal-organic framework material (ZIF-67/CoFe-LDH) was prepared by simple urea water and heat reduction approach and utilized for the peroxymonosulfate (PMS) system to remove sulfamethoxazole (SMX). 95 ± 1.32 % SMX (20 mg/L) was able to degraded in 20 min with TOC removal of 53 ± 1.56 % in ZIF-67/CoFe-LDH/PMS system. The system maintained a fantastic catalytic capability with wide pH range (3-9) and common interfering substances (Cl-, NO3-, CO32-, PO42- and humic acid (HA)), and the degradation efficiency could even remain 80.2 ± 1.48 % at the fifth cycle. Meanwhile, the applicability and feasibility of the catalysts for practical water treatment was verified by the degradation effects of SMX in different water environments and several other typical pollutants. Co and Fe bimetallic active centers synergistically activate PMS, and density functional theory (DFT) predicted adsorption energy about Ov in ZIF-67/CoFe-LDH for PMS was 1.335 eV, and OO bond length of PMS was stretched to 1.826 Å. As a result, PMS was more easily activated and broken, which accelerated the singlet oxygen (1O2), sulfate radical (SO4•-), high-valent metals and other reactive oxygen species (ROS). Radical and non-radical jointly degrading the pollutants improved the catalytic effect. Finally, SMX degradation intermediates were analyzed to explain the degradation pathway and their biotoxicity was also evaluated. This paper provides a new research perspective of oxygen vacancy activating PMS to degrade pollutants.

Ir-Doped Core-Shell Hollow Heterogeneous Nanospindles for Electrocatalytic Oxygen Evolution Reaction

By utilizing Metal-organic framework (MOF) materials as a base, constructing electrocatalysts with heterogeneous structures offers advantages for catalyzing water splitting. In this study, a hollow heterogeneous nanocatalyst, Ir-MIL-88A@NiFe-LDHs, was prepared by growing a layered double hydroxides (LDHs) shell on MIL-88A substrate. The catalyst shows excellent oxygen evolution reaction (OER) performance in a 1.0 M KOH solution, requiring only 217 mV overpotential to achieve a current density of 10 mA cm-2 with a Tafel slope of 62.18 mV dec-1, indicating significant electrocatalytic performance and reaction kinetics characteristics. Furthermore, long-term OER testing also demonstrates the catalyst's outstanding stability. Emphasizing the interfacial interaction between MOF and LDHs, as well as the synergistic effect among Ni, Fe, and Ir elements, the study highlights how these factors collaboratively control the local electronic structure of the hollow Ir-MIL-88A@NiFe-LDHs, resulting in an efficient MOF-derived electrocatalyst.

Enhancing interfacial electron transfer through PANI electron bridge for tailoring dynamic reconstruction and achieving high-performance water oxidation

Tailoring the dynamic reconstruction of transition metal compounds into highly active oxyhydroxides through surface electron state modification is crucial for advancing water oxidation, yet remains a formidable challenge. In this study, a unique polyaniline (PANI) electron bridge was integrated into the metal-organic frameworks (MOFs)/layer double hydroxides (LDHs) heterojunction to expedite electron transfer from MOFs to LDHs, facilitating electron accumulation at the metal sites within MOF and electron-deficient LDHs. This configuration promotes the surface dynamic reconstruction of LDHs into highly active oxyhydroxides while safeguarding the MOF from corrosion in harsh environments over extended periods. The optimized electronic structure modification of both MOFs and LDHs enhances reaction kinetics. The superior MIL-88B(Fe)@PANI@NiCo LDH catalyst achieved 10 mA∙cm-2 at an overpotential of 202 mV and demonstrated stable operation for 120 h at this current density. This research introduces an innovative approach for guiding electron transfer and dynamic catalyst reconstruction by constructing a PANI electron bridge, potentially paving the way for more efficient catalytic systems.

Microwave-Assisted Ultrafast Synthesis of Bimetallic Nickel-Cobalt Metal-Organic Frameworks for Application in the Oxygen Evolution Reaction

Herein, a series of monometallic Ni-, Co- and Zn-MOFs and bimetallic NiCo-, NiZn- and CoZn-MOFs of formula M2(BDC)2DABCO and (M,M')2(BDC)2DABCO, respectively, (M, M'=metal) with the same pillar and layer linkers 1,4-diazabicyclo[2.2.2]octane (DABCO) and benzene-1,4-dicarboxylate (BDC) were prepared through a fast microwave-assisted thermal conversion synthesis method (MW) within only 12 min. In the bimetallic MOFs the ratio M:M' was 4 : 1. The mono- and bimetallic MOFs were selected to systematically explore the catalytic-activity of their derived metal oxide/hydroxides for the oxygen evolution reaction (OER). Among all tested bimetallic MOF-derived catalysts, the NiCoMOF exhibits superior catalytic activity for the OER with the lowest overpotentials of 301 mV and Tafel slopes of 42 mV dec-1 on a rotating disk glassy carbon electrode (RD-GCE) in 1 mol L-1 KOH electrolyte at a current density of 10 mA cm-2. In addition, NiCoMOF was insitu grown in just 25 min by the MW synthesis on the surface of nickel foam (NF) with, for example, a mass loading of 16.6 mgMOF/gNF, where overpotentials of 313 and 328 mV at current densities of 50 and 300 mA cm-2, respectively, were delivered and superior long-term stability for practical OER application. The low Tafel slope of 27 mV dec-1, as well as a low reaction resistance from electrochemical impedance spectroscopy (EIS) measurement (Rfar=2 Ω), confirm the excellent OER performance of this NiCoMOF/NF composite. During the electrocatalytic processes or even before upon KOH pre-treatment, the MOFs are transformed to the mixed-metal hydroxide phase α-/β-M(OH)2 which presents the active species in the reactions (turnover frequency TOF=0.252 s-1 at an overpotential of 320 mV). Compared to the TOF from β-M(OH)2 (0.002 s-1), our study demonstrates that a bimetallic MOF improves the electrocatalytic performance of the derived catalyst by giving an intimate and uniform mixture of the involved metals at the nanoscale.

Modification of carbon nanofibers for boosting oxygen electrocatalysis

Oxygen electrocatalysis is a key process for many effective energy conversion techniques, which requires the development of high-performance electrocatalysts. Carbon nanofibers featuring good electronic conductivity, large specific surface area, high axial strength and modulus, and good resistance toward harsh environments have thus been recognized as reinforcements in oxygen electrocatalysis. This review summarizes the recent progress on carbon nanofibers as electrocatalysts for oxygen electrocatalysis, with special focus on the modulation of carbon nanofibers for further elevating their electrocatalytic performance, which includes morphological and structural engineering, surface and pore size distribution, defect engineering, and coupling with other electroactive materials. Additionally, the correlation between the geometrical/electronic structure of their active centers and electrocatalytic activity is systematically discussed. Finally, conclusions and perspectives of this interesting research field are presented, which we hope will provide guidance for the future fabrication of more advanced carbon-fiber-based electrocatalysts.

MOF-based/derived catalysts for electrochemical overall water splitting

Water-splitting electrocatalysis has gained increasing attention as a promising strategy for developing renewable energy in recent years, but its high overpotential caused by the unfavorable thermodynamics has limited its widespread implementation. Therefore, there is an urgent need to design catalytic materials with outstanding activity and stability that can overcome the high overpotential and thus improve the electrocatalytic efficiency. Metal-organic frameworks (MOFs) based and/or derived materials are widely used as water-splitting catalysts because of their easily controlled structures, abundant heterointerfaces and increased specific surface area. Herein, some recent research findings on MOFs-based/derived materials are summarized and presented. First, the mechanism and evaluation parameters of electrochemical water splitting are described. Subsequently, advanced modulation strategies for designing MOFs-based/derived catalysts and their catalytic performance toward water splitting are summarized. In particular, the correlation between chemical composition/structural functionalization and catalytic performance is highlighted. Finally, the future outlook and challenges for MOFs materials are also addressed.

Bimetallic CPM-37(Ni,Fe) metal-organic framework: enhanced porosity, stability and tunable composition

A newly synthesized series of bimetallic CPM-37(Ni,Fe) metal-organic frameworks with different iron content (Ni/Fe ≈ 2, 1, 0.5, named CPM-37(Ni2Fe), CPM-37(NiFe) and CPM-37(NiFe2)) demonstrated high N2-based specific SBET surface areas of 2039, 1955, and 2378 m2 g-1 for CPM-37(Ni2Fe), CPM-37(NiFe), and CPM-37(NiFe2), having much higher values compared to the monometallic CPM-37(Ni) and CPM-37(Fe) with 87 and 368 m2 g-1 only. It is rationalized that the mixed-metal nature of the materials increases the structural robustness due to the better charge balance at the coordination bonded cluster, which opens interesting application-oriented possibilities for mixed-metal CPM-37 and other less-stable MOFs. In this work, the CPM-37-derived α,β-Ni(OH)2, γ-NiO(OH), and, plausibly, γ-FeO(OH) phases obtained via decomposition in the alkaline medium demonstrated a potent electrocatalytic activity in the oxygen evolution reaction (OER). The ratio Ni : Fe ≈ 2 from CPM-37(Ni2Fe) showed the best OER activity with a small overpotential of 290 mV at 50 mA cm-2, low Tafel slope of 39 mV dec-1, and more stable OER performance compared to RuO2 after 20 h chronopotentiometry at 50 mA cm-2.

Doping Ru on FeNi LDH/FeII/III-MOF heterogeneous core-shell structure for efficient oxygen evolution

Noble metal-based catalysts such as RuO2 and IrO2 are widely used in the catalysis of the OER. However, because of their high price and poor stability, it is urgent to develop transition metal-based electrocatalysts with low precious metal doping as an alternative. Layered double hydroxides (LDHs) grown on 3D metal-organic frameworks (MOFs) are ideal for doping precious metals owing to abundant defects at the heterointerface, large surface area, and intrinsic oxygen evolution activity. In this study, a novel FeNi LDH/MOF heterostructure was prepared via a two-step solvothermal method using Fe-soc-MOFs as the substrate. Subsequently, Ru was introduced through a hydrothermal process. The as-synthesized Ru@FeNi LDH/MOF has an overpotential of only 242 mV at a current density of 10 mA cm-2 and can be used in continuous electrolysis for 48 h. Its unique nanocubic core-shell structure and flower-like LDHs on its surface provide a large number of active sites, which become the key to ensuring high activity and stability. With the doping of Ru, the electronic structure was adjusted and electron transfer was accelerated, further improving electrochemical activity. This study provides a new idea for developing transition metal-based catalysts with low noble metal loading.

Oxygen-Bridged Cobalt-Chromium Atomic Pair in MOF-Derived Cobalt Phosphide Networks as Efficient Active Sites Enabling Synergistic Electrocatalytic Water Splitting in Alkaline Media

Electrochemical water splitting offers a most promising pathway for "green hydrogen" generation. Even so, it remains a struggle to improve the electrocatalytic performance of non-noble metal catalysts, especially bifunctional electrocatalysts. Herein, aiming to accelerate the hydrogen and oxygen evolution reactions, an oxygen-bridged cobalt-chromium (Co-O-Cr) dual-sites catalyst anchored on cobalt phosphide synthesized through MOF-mediation are proposed. By utilizing the filling characteristics of 3d orbitals and modulated local electronic structure of the catalytic active site, the well-designed catalyst requires only an external voltage of 1.53 V to deliver the current density of 20 mA cm-2 during the process of water splitting apart from the superb HER and OER activity with a low overpotential of 87 and 203 mV at a current density of 10 mA cm-2 , respectively. Moreover, density functional theory (DFT) calculations are utilized to unravel mechanistic investigations, including the accelerated adsorption and dissociation process of H2 O on the Co-O-Cr moiety surface, the down-shifted d-band center, a lowered energy barrier for the OER and so on. This work offers a design direction for optimizing catalytic activity toward energy conversion.

Metal-organic frameworks-derived oxalate ligand modified NiCo hydroxides for enhanced electrochemical glycerol oxidation reaction

Glycerol oxidation reaction can be substituted for oxygen evolution reaction for more efficient hydrogen production due to its lower thermodynamic potential. Herein, a series of NiCo hydroxide nanosheets containing abundant Ni3+ species and surface ligands were synthesized by in-situ structural transformation of bimetallic organic frameworks in alkaline media for efficient glycerol oxidation reaction. It is found that the incorporation of Co ions increases the content of the Ni3+ species, and that the Ni/Co ratio of 1.0 lead to the optimal catalytic performance. The oxalate-modified nickel-cobalt hydroxide with the optimized Ni/Co ratio can deliver a current density of 10 mA cm-2 at 1.26 V vs. RHE (reversible hydrogen electrode), and reaches its maximum selectivity and Faradaic efficiency at 1.30 V vs. RHE. A high selectivity of 82.9% and a Faradaic efficiency of 91.0% are achieved. The high catalytic activity can be mainly attributed to the abundant Ni3+ species and surface carboxyl groups.

Ligand leaching enabling improved electrocatalytic oxygen evolution performance

Design and fabrication of cost-effective (pre-)catalysts are important for water splitting and metal-air batteries. In this direction, various metal-organic frameworks (MOFs) have been investigated as pre-catalysts for oxygen evolution. However, the activation process and the complex reconstruction behaviour of these MOFs are not well understood. Herein, square-like MOF nanosheets in which carbon nanotubes were embedded were prepared by introducing an amine ligand to coordinate with Ni ions and then reacting with [Fe(CN)₆]^3-. The formed MOF nanosheets containing nickel and iron species were then activated by NaBH₄, inducing the leaching of ligands and the formation of tiny active species in situ loaded on carbon nanotubes. The prepared catalyst shows superior oxygen evolution performance with an ultralow overpotential of 231 mV for 10 mA cm^-2, a fast reaction kinetics with a small Tafel slope of 52.3 mV dec^-1, and outstanding catalysis stability. The excellent electrocatalytic performance for oxygen evolution can be attributed to the structural advantage of in situ derived small sized active species and one-dimensional conductive networks. This work provides a new thought for the enhancement of the electrocatalytic performance of MOF materials.

Tailoring Metal-Organic Frameworks and Derived Materials for High-Performance Zinc-Air and Alkaline Batteries

Developing multifunctional materials from earth-abundant elements is urgently needed to satisfy the demand for sustainable energy. Herein, we demonstrate a facile approach for the preparation of a metal-organic framework (MOF)-derived Fe₂O₃/C, composited with N-doped reduced graphene oxide (MO-rGO). MO-rGO exhibits excellent bifunctional electrocatalytic activities toward the oxygen evolution reaction (η_j=10 = 273 mV) and the oxygen reduction reaction (half-wave potential = 0.77 V vs reversible hydrogen electrode) with a low ΔE_OER-ORR of 0.88 V in alkaline solutions. A Zn-air battery based on the MO-rGO cathode displays a high specific energy of over 903 W h kg_Zn^-1 (∼290 mW h cm^-2), an excellent power density of 148 mW cm^-2, and an open-circuit voltage of 1.430 V, outperforming the benchmark Pt/C + RuO₂ catalyst. We also hydrothermally synthesized a Ni-MOF that was partially transformed into a Ni-Co-layered double hydroxide (MOF-LDH). A MO-rGO||MOF-LDH alkaline battery exhibits a specific energy of 42.6 W h kg_total mass^-1 (106.5 μW h cm^-2) and an outstanding specific power of 9.8 kW kg_total mass^-1 (24.5 mW cm^-2). This work demonstrates the potential of MOFs and MOF-derived compounds for designing innovative multifunctional materials for catalysis, electrochemical energy storage, and beyond.

Engineering Cu/NiCu LDH Heterostructure Nanosheet Arrays for Highly-Efficient Water Oxidation

The development of stable and efficient electrocatalysts for oxygen evolution reaction is of great significance for electro-catalytic water splitting. Bimetallic layered double hydroxides (LDHs) are promising OER catalysts, in which NiCu LDH has excellent stability compared with the most robust NiFe LDH, but the OER activity is not satisfactory. Here, we designed a NiCu LDH heterostructure electrocatalyst (Cu/NiCu LDH) modified by Cu nanoparticles which has excellent activity and stability. The Cu/NiCu LDH electrocatalyst only needs a low over-potential of 206 mV and a low Tafel slope of 86.9 mV dec^-1 at a current density of 10 mA cm^-2 and maintains for 70 h at a high current density of 100 mA cm^-2 in 1M KOH. X-ray photoelectron spectroscopy (XPS) showed that there was a strong electronic interaction between Cu nanoparticles and NiCu LDH. Density functional theory (DFT) calculations show that the electronic coupling between Cu nanoparticles and NiCu LDH can effectively improve the intrinsic OER activity by optimizing the conductivity and the adsorption energy of oxygen-containing intermediates.

Polymetallic sulfide nanosheet arrays with composite structure as a highly efficient oxygen evolution electrocatalyst

Designing an earth-abundant and cost-effective electrocatalyst for oxygen evolution reaction (OER) is the crux to the hydrogen production by water electrolysis on industrial scale. Herein, we developed a trimetallic sulfide hybrid of CoS_1.097/Fe_1-xS/Ni₃S₂/NF nanoarrays by the combination of morphology optimization and interface modulation. The unique morphology of ultrathin nanosheets significantly enriches the reaction sites of the catalyst, while the abundant heterogeneous interfaces effectively regulate the local electron structure and thus intrinsically enhances the catalytic activity of the material. As a result, the catalyst delivers the superior OER performance with the ultralow overpotential of 229 mV at the current density of 50 mA cm^-2 and Tafel slope of 30.2 mV dec^-1. Furthermore, the current density of the material keeps constant for 50 h in 1.0 M KOH. This work proposes a strategy for the synthesis of polymetallic sulfide catalysts with composite structure as an efficient OER catalyst by morphology optimization and interface modulation.

Facile synthesis of Co-Ni layered double hydroxides nanosheets wrapped on a prism-like metal-organic framework for efficient oxygen evolution reaction

The construction of low-cost oxygen evolution reaction (OER) electrocatalysts with high activity and good durability is a considerable challenge for facilitating the efficient utilization of green energy. Herein, the prism-like materials of institute lavoisier frameworks-88 (MIL-88) was first synthesized by a hydrothermal method. Then, Co-Ni layered double hydroxides (CoNi-LDHs) nanosheets were directly wrapped on the MIL-88 surface by electrodeposition to form core-shell MIL-88@CoNi-LDHs composites. Due to the distinct structure and synergistic effect between the MIL-88 core and CoNi-LDHs shell, it was found that MIL-88@CoNi-LDHs had outstanding OER activity with a small Tafel slope (45.55 mV dec^-1), low overpotential (314 mV) at 10 mA cm^-2, and superior durability. This study provides a prospective pathway to exploit highly efficient low-cost electrocatalysts for OER.

Monodispersed Pt Sites Supported on NiFe-LDH from Synchronous Anchoring and Reduction for High Efficiency Overall Water Splitting

Precise design of low-cost, efficient and definite electrocatalysts is the key to sustainable renewable energy. Herein, this work develops a targeted-anchored and subsequent spontaneous-redox strategy to synthesize nickel-iron layered double hydroxide (LDH) nanosheets anchored with monodispersed platinum (Pt) sites (Pt@LDH). Intermediate metal-organic frameworks (MOF)/LDH heterostructure not only provides numerous confine points to guarantee the stability of Pt sites, but also excites the spontaneous reduction for Pt^II . Electronic structure, charge transfer ability and reaction kinetics of Pt@LDH can be effectively facilitated by the monodispersed Pt moieties. As a result, the optimized Pt@LDH that with the 5% ultra-low content Pt exhibits the significant increment in electrochemical water splitting performance in alkaline media, which only afford low overpotentials of 58 mV at 10 mA cm^-2 for hydrogen evolution reaction (HER) and 239 mV at 10 mA cm^-2 for oxygen evolution reaction (OER), respectively. In a real device, Pt@LDH can drive an overall water-splitting at low cell voltage of 1.49 V at 10 mA cm^-2 , which can be superior to most reported similar LDH-based catalysts. Moreover, the versatility of the method is extended to other MOF precursors and noble metals for the design of ultrathin LDH supported monodispersed noble metal electrocatalysts promoting research interest in material design.

Functionalization of pine sawdust biochars with Mg/Al layered double hydroxides to enhance adsorption capacity of synthetic azo dyes: Adsorption mechanisms and reusability

This study determined that the adsorption of azo dyes, Methyl Orange (MO) and Sunset Yellow FCF (SYF), using the pristine pine sawdust biochar (PSB) and post-modified PSB with Mg/Al layered double hydroxides (PSB-LDH_MgAl) was examined to offer valuable information into the differences in their adsorption mechanisms. Although a lower specific surface area of PSB-LDH_MgAl (147.2 m² g^-1) than PSB (495.7 m² g^-1), LDH_MgAl were successfully functionalized on the PSB surface through co-precipitation, which was highly related to the improvements of adsorption capacity of PSB-LDH_MgAl toward MO and SYF. The MO and SYF adsorption kinetics by PSB and PSB-LDH_MgAl were confirmed to the pseudo-second-order and considered chemisorption. The adsorption capacity of MO and SYF adsorbed onto PSB-LDH_MgAl (MO = 21.8 mg g^-1, SYF = 23.6 mg g^-1) were significantly higher than that of PSB (MO = 2.2 mg g^-1, SYF = 1.6 mg g^-1). The adsorption isotherms of MO and SYF by PSB were well fitted by Freundlich isotherm, whereas the MO and SYF via PSB-LDH_MgAl were by Langmuir isotherm. Even after 3 adsorption-desorption cycles using desorbents, the PSB-LDH_MgAl remained excellent reusability (reuse efficiency: >81.2%). These findings suggest that post-modification with LDH_MgAl might accelerate the adsorption performance (i.e., electrostatic interaction) of azo dyes to PSB in water.

Rising of MXenes: Novel 2D-functionalized nanomaterials as a new milestone in corrosion science - a critical review

Corrosion is a natural process between a metal and its environment that can gradually cause catastrophic damage to the metal equipment, which would have economic implications. Consequently, several protective methods have been utilized to prevent metals from severe degradation. Organic polymeric coatings have been widely used as the most convenient and cost-effective method to boost metals' anti-corrosion properties. Nonetheless, these coatings have a significant amount of solvent, resulting in shrinkage and micro defects in the films during the curing process. Many studies have verified that transition metal carbides/nitrides (MXenes) can form a "labyrinth effect" in the polymeric coatings due to their "nano-barrier effect". Furthermore, based on their sheet-like structures, they can considerably cover the surface defects of the polymeric films. Therefore, the penetration of corrosive elements can be substantially curbed. It is the first review that specifically focused on the new family of 2D nanomaterials, i.e., MXenes, and discussed their applications in corrosion protection systems. The MXenes' pros and cons in the polymeric matrixes as nanofillers will be clarified. Moreover, the synthesis and functionalization methods of the MXenes, their applications, and corrosion protection mechanism will be explored. Subsequently, the MXenes' superiority over other 2D nanomaterials will be highlighted while their future perspectives and industrial applications will be predicted.

Metal-organic framework-mediated synthesis of hierarchical layered double hydroxide for high-efficiency enrichment of phosphopeptides

When applied as adsorbents for phosphopeptides enrichment, two-dimensional (2D) layered double hydroxides (LDHs) are usually limited by the disadvantages of buried affinity sites and reduced specific surface area. Multifarious exfoliation strategies have been implemented to compensate for these deficiencies, but tedious exfoliation process cannot meet the requirements of LDHs as high-efficiency adsorbents. Incorporating LDHs with three-dimensional (3D) template can avoid tedious exfoliation and produce hierarchical LDHs with large specific surface area and massive affinity sites. Herein, a hierarchical LDH (denoted as Fe₃O₄@ZIF-8@Zn-Ga LDH) was prepared by metal-organic framework (MOF)-mediated synthesis strategy, and a magnetic solid-phase extraction (MSPE) platform was constructed and employed for phosphopeptides enrichment with high efficiency. The unique 3D structure and abundant metal nodes of MOF provide 3D template and metal sources for in-situ nucleation and generation of LDH. Large specific surface area and massive exposed Zn and Ga endow Fe₃O₄@ZIF-8@Zn-Ga LDH with high enrichment efficiency toward phosphopeptides from complicated biological samples. With the aid of mass spectrometry (MS) techniques, we profiled endogenous or global phosphopeptides from human saliva and serum, which proved the practical application value of this material.

Synthesis of 3D Hollow Layered Double Hydroxide-Molybdenum Disulfide Hybrid Materials and Their Application in Flame Retardant Thermoplastic Polyurethane

The development of high-performance thermoplastic polyurethane (TPU) with high flame retardancy and low toxicity has always been the focus of its research. In this paper, the novel 3D hollow layered double hydroxide/molybdenum disulfide (LDH/MoS₂) hybrid materials were synthesized by hydrothermal method using the MIL-88A as in situ sacrificial template and MoS₂ as synergistic flame retardant. Among all TPU composites, the peak heat release rate, total heat release rate, and total smoke release rate of TPU/NiFeTb-LDH/MoS₂ were reduced by 50.9%, 18.2%, and 35.8% compared with pure TPU, respectively. The results of the thermogravimetric infrared analysis demonstrated that the contents of combustible volatiles (hydrocarbons) and toxic volatiles (CO and HCN) emitted from TPU/LDH/MoS₂ were significantly reduced, indicating that LDH/MoS₂ hybrid materials can dramatically enhance the fire safety of TPU composites. Combined with the analysis of carbon residues and thermal stability of TPU composites, the enhanced flame retardancy and smoke suppression performances are primarily attributed to the catalytic carbonization of LDH and the physical barrier effect of MoS₂.

Study on Oxygen Evolution Reaction Performance of Jarosite/C Composites

In the electrolysis of water process, hydrogen is produced and the anodic oxygen evolution reaction (OER) dominates the reaction rate of the entire process. Currently, OER catalysts mostly consist of noble metal (NM) catalysts, which cannot be applied in industries due to the high price. It is of great importance to developing low-cost catalysts materials as NM materials substitution. In this work, jarosite (AFe₃(SO₄)₂(OH)₆, A = K⁺, Na⁺, NH⁴⁺, H₃O⁺) was synthesized by a one-step method, and its OER catalytic performance was studied using catalytic slurry (the weight ratios of jarosite and conductive carbon black are 2:1, 1:1 and 1:2). Microstructures and functional groups of synthesized material were analyzed using XRD, SEM, FI-IR, etc. The OER catalytic performance of (NH₄)Fe₃(SO₄)₂(OH)₆/conductive carbon black were examined by LSV, Tafel, EIS, ECSA, etc. The study found that the OER has the best catalytic performance when the weight ratio of (NH₄)Fe₃(SO₄)₂(OH)₆ to conductive carbon black is 2:1. It requires only 376 mV overpotential to generate current densities of 10 mA cm⁻² with a small Tafel slope (82.42 mV dec⁻¹) and large C_dl value (26.17 mF cm⁻²).

MOFs-derived hollow Copper-based sulfides for optimized electromagnetic behaviors

The preparation of hollow materials is one of the most feasible ways to obtain efficient electromagnetic wave (EMW) absorbers. Herein, using the copper-based metal-organic frameworks (Cu-MOF-74) as templates, hollow copper-based sulfides with various morphologies (rod-like, cubic, and dodecahedral) were designed and synthesized. The outer Cu₂S and/or Cu₃₁S₁₆ shell possesses excellent electronic conductivity and abundant heterogeneous interfaces, while the inner hollow cavity endows the absorbers with lightweight characteristics and good impedance matching according to the Maxwell-Garnett (MG) theory. Accordingly, the effective absorption bandwidth reaches 6.2 GHz at 2.3 mm with 20 wt% filler loading, exhibiting superior performance compared with the vast majority of previous MOFs derived absorbers. Furthermore, our study can serve a guide to construct hollow structured nanocomposites to tune electromagnetic parameters and strengthen EMW absorption properties.

Ir-doped Co(OH)2 Nanosheets as Efficient Electrocatalyst for Oxygen Evolution Reaction

In recent years, Co-based metal-organic frameworks (Co-MOFs) have received significant research interest because of their large specific surface area, high porosity, tunable structure and topological flexibility. However, the comparatively weak...

Amorphous FeOOH nanoparticles decorated on defect-rich porous Ni MOF nanosheet based hierarchical architectures toward superior OER performance

Amorphous FeOOH nanoparticles decorated on defect-rich porous Ni MOF nanosheet based hierarchical architectures toward superior OER performance.

In-situ construction of 3D hetero-structured sulfur-doped nanoflower-like FeNi LDH decorated with NiCo Prussian blue analogue cubes as efficient electrocatalysts for boosting oxygen evolution reaction

At present, it is urgent for us to develop non-noble metal-based catalysts with abundant reserves and high efficiency towards oxygen evolution reaction (OER) in water electrolysis devices. Herein, cubic NiCo-Prussian blue analogue (PBA)/ flower-like FeNi layered double hydroxide (LDH) heterostructure was facilely in-situ formed on porous nickel foam (NF) via hydrothermal strategy coupled by subsequent sulfurizing treatment (named as S-FeNi LDH@PBA/NF), showing largely facilitated electron transfer over homogeneous counterpart. Also, we investigated the effects of different Fe/Ni feeding ratios on their catalytic properties in some detail. The as-prepared S-FeNi LDH@PBA/NF demonstrated the superior OER activity (e.g. only 243 mV of overpotential required for 50 mA cm^-2) and stability. Accordingly, using the catalyst as anode, the home-assembled S-FeNi LDH@PBA/NF//Pt/C/NF electrolyzer exhibited small Tafel slope (83.1 mV dec^-1) and ultra-stability, showing the potential feasibility in practical water electrolysis. This strategy provides a hopeful model to enhance the OER performance by effectively constructing advanced catalyst with promising heterostructure and optimal electronic structure.

Advances in Understanding the Electrocatalytic Reconstruction Chemistry of Coordination Compounds

Coordination compounds including mainstream metal-organic frameworks and Prussian blue analogues receive extensive researches when they directly serve as electrocatalysts. Their reconstruction phenomena, that are closely associated with actual contributions and intrinsic catalytic mechanisms, are expected to be well summarized. Here, the recent advances in understanding reconstruction chemistry of coordination compounds are reviewed, including their main classifications and structural properties, reconstruction phenomena in electrocatalysis (e.g., oxygen/hydrogen evolution reaction, CO₂ reduction), influence factors of reconstruction parameters (e.g., reconstruction rate and reconstruction degree), and reconstruction-performance correlation. It is outlined that the reconstruction processes are influenced by electronic structure of coordination compounds, pH and temperature of testing solution, and applied potentials. The characterization techniques reflecting the evolution information before and after catalysis are also introduced for reconstruction-related mechanistic study. Finally, some challenges and outlooks on reconstruction investigations of coordination compounds are proposed, and the necessity of studying and understanding of these themes under actual working conditions of devices is highlighted.

Synthesis of amorphous FeNiCo trimetallic hybrid electrode from ZIF precursors for efficient oxygen evolution reaction

Development of non-noble multi-metallic electrocatalyst with high oxygen evolution reaction (OER) activity via a simple and low-cost method is of great importance for improving the efficiency of water electro-chemical splitting. Herein, a solution impregnation strategy was proposed to synthesize novel FeNi-doped Co-ZIF-L trimetallic hybrid electrocatalyst using Co-ZIF-L as sacrificial templates and Fe and Ni ions as etchants and dopants. This synthetic strategy could be realized via the etching-coprecipitation mechanism to obtain an amorphous hybrid containing multi-metal hydroxides. The as-prepared electrocatalyst loaded on Ni foam displays a low overpotential of 245 mV at 10 mA·cm^-2, a small Tafel slope of 54.9 mV·dec^-1, and excellent stability at least 12 h in the OER process. The facile and efficient synthetic strategy presents a new entry for the fabrication of ZIFs-derived multi-metallic electrocatalysts for OER electrocatalysis.

Ru doping induces the construction of a unique core-shell microflower self-supporting electrocatalyst for highly efficient overall water splitting

Since the large reaction energy barrier caused by multi-step electron transfer processes of the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) gravely restricts the practical application of electrocatalytic water splitting, it is urgent to develop a dual-functional electrocatalyst which can effectively reduce the reaction energy barrier and actually speed up the reaction. Herein, the Ru species are doped into the complex of magnetite and FeNi-layered double hydroxide by a one-step oil bath method, and a self-supporting binder-free bifunctional electrocatalyst was synthesized on the surface of iron foam (named Ru-Fe₃O₄@FeNi-LDH/IF). The unique 3D core-shell microflower structure of Ru-Fe₃O₄@FeNi-LDH/IF, the combination of active ingredient and conductive substrate, together with the doping of Ru may immensely provide a large number of active sites, adjust the electronic structure, accelerate electron transfer, and thus greatly improve the electrocatalytic activity and durability. It is worth mentioning that when Ru-Fe₃O₄@FeNi-LDH/IF is used as the anode and cathode for overall water splitting, only 1.52 V battery voltage can generate a current density of 10 mA cm^-2, and also maintain a prominent stability for at least 36 hours. This work provides a feasible strategy for heteroatom-doping LDH as a bifunctional electrocatalyst.

An ingeniously assembled metal-organic framework on the surface of FeMn co-doped Ni(OH)2 as a high-efficiency electrocatalyst for the oxygen evolution reaction

To overcome the problem of the sluggish kinetics of the oxygen evolution reaction (OER), it is of great significance to develop an efficient and stable non-noble metal-based OER catalyst for electrocatalytic energy conversion and storage. Herein, a complex of a metal-organic framework and hydroxide is synthesized by performing a ligand etching strategy on FeMn co-doped Ni(OH)₂ nanosheets in situ grown on nickel foam (FeMn-Ni(OH)₂@MOF/NF). Benefiting from the unique sheet-on-sheet hierarchical structure, multi-metal active nodes and two active materials grown in situ, the resulting FeMn-Ni(OH)₂@MOF/NF demonstrated brilliant OER activity with an overpotential of 199 mV to achieve a current density of 10 mA cm^-2 and long-term stability. This research will provide a new strategy for the design of high-performance OER electrocatalysts.

Hierarchical CoFe LDH/MOF nanorods array with strong coupling effect grown on carbon cloth enables efficient oxidation of water and urea

Oxygen evolution reaction (OER) and urea oxidation reaction (UOR) play important roles in the fields of hydrogen energy production and pollution treatment. Herein, a facile one-step chemical etching strategy is provided for fabricating one-dimensional hierarchical nanorods array composed of CoFe layered double hydroxide (LDH)/metal-organic frameworks (MOFs) supported on carbon cloth as efficient and stable OER and UOR catalysts. By precisely controlling the etching rate, the ligands from Co-MOFs are partially removed, the corresponding metal centers then coordinate with hydroxyl ions to generate ultrathin amorphous CoFe LDH nanosheets. The resultant CoFe LDH/MOFs catalyst possesses large active surface area, enhanced conductivity and extended electron/mass transfer channels, which are beneficial for catalytic reactions. Additionally, the intimate contact between CoFe LDH and MOFs modulates the local electronic structure of the catalytic active site, leading to enhanced adsorption of oxygen-containing intermediates to facilitate fast electrocatalytic reaction. As a result, the optimized CoFe LDH/MOF-0.06 exhibits superior OER activity with a low overpotential of 276 at a current density of 10 mA cm^-2with long-term durability. Additionally, it merely requires a voltage of 1.45 V to obtain 10 mA cm^-2in 1 M KOH solution with 0.33 urea and is 56 mV lower than the one in pure KOH. The work presented here may hew out a brand-new route to construct multi-functional electrocatalysts for water splitting, CO₂reduction, nitrogen reduction reactions and so on.

Alkali-induced Transformation of Ni-MOF into Ni(OH)2 Nanostructured Flowers for Efficient Electrocatalytic Methanol Oxidation Reaction

Post treatment of metal-organic frameworks (MOFs) is widely employed to develop efficient electrocatalysts with better catalytic properties. But the complex processes of post treatment generally led to the collapse of the original structures of MOFs, making the preservation of their pristine hierarchical porous structure a great challenge. Herein, we propose the strategy of alkali treatment of Ni-MOF to transform it into Ni(OH)₂ with similar morphology and enhanced electrocatalytic properties for methanol oxidation reaction (MOR). The structure and electrocatalytic properties of as-obtained Ni(OH)₂ nanostructured flowers were seriously depended on the alkali concentrations. As the result, Ni(OH)₂ obtained from Ni-MOF treated by 0.25 M NaOH (noted as Ni(OH)₂ -0.25) performs 1.5 and 2.5 times larger current density than those of Ni(OH)₂ -0.025 and Ni(OH)₂ -0.5 for MOR. Moreover, the electrocatalytic process and mechanism of MOR on the catalyst of Ni(OH)₂ -0.25 are also revealed. Hence, this ex situ conversion strategy of alkali treatment for Ni-MOF uncovered the transformation of MOFs in alkaline solution and develops robust electrocatalyst for practical application of methanol fuel cells.

Multi-shelled hollow layered double hydroxides with enhanced performance for the oxygen evolution reaction

Hollow materials with a sophisticated structure are promising for various applications with boosted performances and innovative properties. Herein, we report an in situ transformation strategy using multi-layered MOFs as templates to fabricate multi-shelled hollow NiZnCoFe layered double hydroxides (LDHs), which outperformed the double- and single-shelled hollow LDHs and commercial IrO₂ in the oxygen evolution reaction.

Interface engineering in the α-Co(OH)2/ZIF-67 heterostructure for enhanced oxygen evolution electrocatalysis

The interface coupling endows the heterostructural α-Co(OH)₂/ZIF-67-0.6 material with higher activity (η₁₀ = 320 mV), fast kinetics and excellent durability toward oxygen evolution reaction electrocatalysis.