Synthesis, Photophysical and Electronic Properties of a D-π-A Julolidine-Like Pyrenyl-o-Carborane

We synthesized 2-(1-1,2-dicarbadodecaboranyl(12))-6,6,12,12-tetramethyl-7,8,11,12-tetrahydro-6H,10H-phenaleno[1,9-fg]pyrido[3,2,1-ij]quinoline (4), a julolidine-like pyrenyl-o-carborane, with pyrene substituted at the 2,7-positions on the HOMO/LUMO nodal plane. Using solid state molecular structures, photophysical data, cyclic voltammetry, DFT and LR-TDDFT calculations, we compare o-carborane and B(Mes)2 (Mes=2,4,6-Me3C6H2) as acceptor groups. Whereas the π-acceptor strength of B(Mes)2 is sufficient to drop the pyrene LUMO+1 below the LUMO, the carborane does not do this. We confirm the π-donor strength of the julolidine-like moiety, however, which raises the pyrene HOMO-1 above the HOMO. In contrast to the analogous pyrene-2-yl-o-carborane, 2-(1-1,2-dicarbadodecaboranyl(12))-pyrene VI, which exhibits dual fluorescence, because the rate of internal conversion between locally-excited (LE) and charge transfer (CT) (from the pyrene to the carborane) states is faster than the radiative decay rate, leading to a thermodynamic equilibrium between the 2 states, 4 shows only single fluorescence, as the CT state involving the carborane as the acceptor moiety in not kinetically accessible, so a more localized CT emission involving the julolidine-like pyrene moiety is observed.

Tuning of the height of energy barrier between locally-excited and charge transfer states by altering the fusing position of o-carborane in phenylnaphthalene

We synthesized two types of the regioisomers fused by a phenylnaphthalene ring with variable connection points to the o-carborane scaffold. In this paper, we describe their photoluminescence (PL) properties and detailed photochemical mechanisms. According to the series of optical measurements, interestingly, they showed different PL characters in terms of wavelength and the dual-emission character despite that they have the common aromatic unit. Variable-temperature PL measurements and quantum chemical calculations suggested that the substitution position of aryl groups to o-carborane plays an important role in determining the energy barrier to the intramolecular charge-transfer (ICT) state at the S₁ state. Finally, it is revealed that the relative position of the C-C bond of o-carborane and the aryl center should be responsible for the photophysical events of aryl-o-carboranes.

Metal-Catalyzed and Metal-Free Nucleophilic Substitution of 7-I-B18H21

In this work, two pathways of reactivity are investigated to generate site-specific substitutions at the B7 vertex of the luminescent boron cluster, anti-B₁₈H₂₂. First, a palladium-catalyzed cross-coupling reaction utilizing the precursor 7-I-B₁₈H₂₁ and a series of model nucleophiles was developed, ultimately producing several B-N- and B-O-substituted species. Interestingly, the B-I bond in this cluster can also be substituted in an uncatalyzed fashion, leading to the formation of various B-N, B-O, and B-S products. This work highlights intricate differences corresponding to these two reaction pathways and analyzes the role of solvents and additives on product distributions. As a result of our synthetic studies, seven new B₁₈-based clusters were synthesized, isolated, and characterized by mass spectrometry and nuclear magnetic resonance (NMR) spectroscopy. The photoluminescence properties of two structurally similar ether and thioether products were further investigated, with both exhibiting blue fluorescence in solution at 298 K and long-lived green or yellow phosphorescence at 77 K. Overall, this work shows, for the first time, the ability to perform substitution of a boron-halogen bond with nucleophiles in a B₁₈-based cluster, resulting in the formation of photoluminescent molecules.

Revisiting the Role of Charge Transfer in the Emission Properties of Carborane-Fluorophore Systems: A TDDFT Investigation

In this study, we performed a detailed investigation of the S1 potential energy surface (PES) of o-carborane-anthracene (o-CB-Ant) with respect to the C-C bond length on o-CB and the dihedral angle between o-CB and Ant moieties. The effects of different substituents (F, Cl, CN, and OH) on carbon- or boron-substituted o-CB, along with a π-extended acene-based fluorophore, pentacene, on the nature and energetics of S1 → S0 transitions are evaluated. Our results show the presence of a non-emissive S1 state with an almost pure charge transfer (CT) character for all systems as a result of significant C-C bond elongation (C-C = 2.50-2.56 Å) on o-CB. In the case of unsubstituted o-CB-Ant, the adiabatic energy of this CT state corresponds to the global minimum on the S1 PES, which suggests that the CT state could be involved in emission quenching. Despite large deformations on the o-CB geometry, predicted energy barriers are quite reasonable (0.3-0.4 eV), and the C-C bond elongation can even occur without a noticeable energy penalty for certain conformations. With substitution, it is shown that the dark CT state becomes even more energetically favorable when the substituent shows -M effects (e.g., -CN), whereas substituents showing +M effects (e.g., -OH) can result in an energy increase for the CT state, especially for partially stretched C-C bond lengths. It is also shown that the relative energy of the CT state on the PES depends strongly on the LUMO level of the fluorophore as this state is found to be energetically less favorable compared to other conformations when anthracene is replaced with π-extended pentacene. To our knowledge, this study shows a unique example of a detailed theoretical analysis on the PES of the S1 state in o-CB-fluorophore systems with respect to substituents or fluorophore energy levels. Our findings could guide future experimental work in emissive o-CB-fluorophore systems and their sensing/optoelectronic applications.

Thermodynamic equilibrium between locally excited and charge-transfer states through thermally activated charge transfer in 1-(pyren-2'-yl)-o-carborane

Reversible conversion between excited-states plays an important role in many photophysical phenomena. Using 1-(pyren-2'-yl)-o-carborane as a model, we studied the photoinduced reversible charge-transfer (CT) process and the thermodynamic equilibrium between the locally-excited (LE) state and CT state, by combining steady state, time-resolved, and temperature-dependent fluorescence spectroscopy, fs- and ns-transient absorption, and DFT and LR-TDDFT calculations. Our results show that the energy gaps and energy barriers between the LE, CT, and a non-emissive 'mixed' state of 1-(pyren-2'-yl)-o-carborane are very small, and all three excited states are accessible at room temperature. The internal-conversion and reverse internal-conversion between LE and CT states are significantly faster than the radiative decay, and the two states have the same lifetimes and are in thermodynamic equilibrium.

Efficient Photoinduced Electron Transfer from Pyrene-o-Carborane Heterojunction to Selenoviologen for Enhanced Photocatalytic Hydrogen Evolution and Reduction of Alkynes

A series of pyrene or pyrene-o-carborane-appendant selenoviologens (Py-SeV²⁺ , Py-Cb-SeV²⁺ ) for enhanced photocatalytic hydrogen evolution reaction (HER) and reduction of alkynes is reported. The efficient photoinduced electron transfer (PET) from electron-rich pyrene-o-carborane heterojunction (Py-Cb) with intramolecular charge transfer (ICT) characteristic to electron-deficient selenoviologen (SeV²⁺ ) (k_ET = 1.2 × 10¹⁰ s^-1 ) endows the accelerating the generation of selenoviologen radical cation (SeV^+• ) compared with Py-SeV²⁺ and other derivatives. The electrochromic/electrofluorochromic devices' (ECD and EFCD) measurements and supramolecular assembly/disassembly processes of SeV²⁺ and cucurbit[8]uril (CB[8]) results show that the PET process can be finely tuned by electrochemical and host-guest chemistry methods. By combination with Pt-NPs catalyst, the Py-Cb-SeV²⁺ -based system shows high-efficiency visible-light-driven HER and highly selective phenylacetylene reduction due to the efficient PET process.

Effects of molecular geometry on the efficiency of intramolecular charge transfer-based luminescence in o-carboranyl-substituted 1H-phenanthro[9,10-d]imidazoles

The distinct difference in solid-state emission efficiency between 1H-phenanthro[9,10-d]imidazole–o-carboranyl luminophores showed that the geometric orientation is a key factor for controlling intramolecular charge transfer-based radiative decay.

Manipulation of electronic and structural effects on the solid-state emission of multiple linked anthracenyl-o-carborane dyads

A direct boost of emission efficiency is presented based on the strategy of linking multiple weak AIE-active anthracenyl-o-carborane dyads together for improving solid-state luminescence.

Synthesis of 3-Aryl-ortho-carboranes with Sensitive Functional Groups

A simple and efficient method was developed for the one-pot synthesis of 3-aryl derivatives of ortho-carborane with sensitive functional groups using 3-iodo-ortho-carborane and aryl zinc bromides that were generated in situ. A series of 3-aryl-ortho-carboranes, including those containing nitrile and ester groups, 3-RC₆H₄-1,2-C₂B₁₀H₁₁ (R = p-Me, p-NMe₂, p-OCH₂OMe, p-OMe, o-CN, p-CN, o-COOEt, m-COOEt, p-COOEt) was synthesized using this approach. The solid-state structures of 3-RC₆H₄-1,2-C₂B₁₀H₁₁ (R = p-OMe, o-CN, and p-CN) were determined by single crystal X-ray diffraction. The intramolecular hydrogen bonding involving the ortho-substituents of the aryl ring and the CH and BH groups of carborane was discussed.

Alteration of intramolecular electronic transition via deboronation of carbazole-based o-carboranyl compound and intriguing 'turn-on' emissive variation

The conversion of closo-o-carborane-containing compounds to the nido-o-species via deboronation causes photophysical changes that could be used for sensing applications. 9-Methyl-9H-carbazole-based closo- (closo-Cz) and nido-o-carboranyl (nido-Cz) compounds were prepared and fully characterised by multinuclear NMR spectroscopy and elemental analysis, and the solid-state molecular structure of closo-Cz was analysed by X-ray crystallography. Although the closo-compound exhibited an emissive pattern centred at λ em = ca. 530 nm in the rigid state only (in THF at 77 K and as a film), nido-Cz demonstrated intense emission in the near-UV region (λ em = ca. 380 nm) in both solution and film states at 298 K. The positive solvatochromic effect of nido-Cz and the results of theoretical calculations for both the o-carboranyl compounds supported that these emissive features originate from intramolecular charge transfer (ICT) corresponding to the o-carborane. Furthermore, the calculations verified that the electronic role of the o-carboranyl unit changed from acceptor to donor upon deboronation from closo-Cz to nido-Cz. Investigations of the radiative decay mechanisms of closo-Cz and nido-Cz according to their quantum efficiencies (Φ em) and decay lifetimes (τ obs) suggested that the ICT-based radiative decays of closo-Cz and nido-Cz readily occur in the film (solid) and solution state, respectively. These observations implied that the emission of closo-Cz in the solution state could be drastically enhanced by deboronation to nido-Cz upon exposure to an increasing concentration of fluoride anions. Indeed, turn-on emissive features in an aqueous solution were observed upon deboronation, strongly suggesting the potential of closo-Cz as a turn-on and visually detectable chemodosimeter for fluoride ion sensing.

Strategic molecular design of closo-ortho-carboranyl luminophores to manifest thermally activated delayed fluorescence

In this paper, we propose a strategic molecular design of closo-o-carborane-based donor-acceptor dyad system that exhibits thermally activated delayed fluorescence (TADF) in the solution state at ambient temperature. Planar 9,9-dimethyl-9H-fluorene-based compounds with closo- and nido-o-carborane cages appended at the C2-, C3-, and C4-positions of each fluorene moiety (closo-type: 2FC, 3FC, 4FC, and 4FCH, and nido-type: nido-4FC = [nido-form of 4FC]·[NBu4]) were prepared and characterized. The solid-state molecular structure of 4FC exhibited a significantly distorted fluorene plane, which suggests the existence of severe intramolecular steric hindrance. In photoluminescence measurements, 4FC exhibits a noticeable intramolecular charge transition (ICT)-based emission in all states (solution at 298 K and 77 K, and solid states); however, emissions by other closo-compounds were observed in only the rigid state (solution at 77 K and film). Furthermore, nido-4FC did not exhibit emissive traces in any state. These observations verify that all radiative decay processes correspond to ICT transitions triggered by closo-o-carborane, which acts as an electron acceptor. Relative energy barriers calculated by TD-DFT as dihedral angles around o-carborane cages change in closo-compounds, which indicates that the structural formation of 4FC is nearly fixed around its S0-optimized structure. This differs from that for other closo-compounds, wherein the free rotation of their o-carborane cages occurs easily at ambient temperature. Such rigidity in the structural geometry of 4FC results in ICT-based emission in solution at 298 K and enhancement of quantum efficiency and radiative decay constants compared to those for other closo-compounds. Furthermore, 4FC displays short-lived (∼0.5 ns) and long-lived (∼30 ns) PL decay components in solution at 298 K and in the film state, respectively, which can be attributed to prompt fluorescence and TADF, respectively. The calculated energy difference (ΔE ST) between the first excited singlet and triplet states of the closo-compounds demonstrate that the TADF characteristic of 4FC originates from a significantly small ΔE ST maintained by the rigid structural fixation around its S0-optimized structure. Furthermore, the strategic molecular design of the o-carborane-appended π-conjugated (D-A) system, which forms a rigid geometry due to severe intramolecular steric hindrance, can enhance the radiative efficiency for ICT-based emission and trigger the TADF nature.

Influence of Electronic Environment on the Radiative Efficiency of 9-Phenyl-9H-carbazole-Based ortho-Carboranyl Luminophores

The photophysical properties of closo-ortho-carboranyl-based donor–acceptor dyads are known to be affected by the electronic environment of the carborane cage but the influence of the electronic environment of the donor moiety remains unclear. Herein, four 9-phenyl-9H-carbazole-based closo-ortho-carboranyl compounds (1F, 2P, 3M, and 4T), in which an o-carborane cage was appended at the C3-position of a 9-phenyl-9H-carbazole moiety bearing various functional groups, were synthesized and fully characterized using multinuclear nuclear magnetic resonance spectroscopy and elemental analysis. Furthermore, the solid-state molecular structures of 1F and 4T were determined by X-ray diffraction crystallography. For all the compounds, the lowest-energy absorption band exhibited a tail extending to 350 nm, attributable to the spin-allowed π–π* transition of the 9-phenyl-9H-carbazole moiety and weak intramolecular charge transfer (ICT) between the o-carborane and the carbazole group. These compounds showed intense yellowish emission (λ_em = ~540 nm) in rigid states (in tetrahydrofuran (THF) at 77 K and in films), whereas considerably weak emission was observed in THF at 298 K. Theoretical calculations on the first excited states (S₁) of the compounds suggested that the strong emission bands can be assigned to the ICT transition involving the o-carborane. Furthermore, photoluminescence experiments in THF‒water mixtures demonstrated that aggregation-induced emission was responsible for the emission in rigid states. Intriguingly, the quantum yields and radiative decay constants in the film state were gradually enhanced with the increasing electron-donating ability of the substituent on the 9-phenyl group (‒F for 1F < ‒H for 2P < ‒CH₃ for 3M < ‒C(CH₃)₃ for 4T). These features indicate that the ICT-based radiative decay process in rigid states is affected by the electronic environment of the 9-phenyl-9H-carbazole group. Consequently, the efficient ICT-based radiative decay of o-carboranyl compounds can be achieved by appending the o-carborane cage with electron-rich aromatic systems.

Impact of deboronation on the electronic characteristics of closo-o-carborane: intriguing photophysical changes in triazole-appended carboranyl luminophores

5-Phenyl-1,2,4-triazole-appended closo- (CB1 and CB2) and nido-o-carboranyl (nido-CB1 and nido-CB2) compounds were prepared and fully characterized using multinuclear NMR spectroscopy and elemental analysis. The solid-state molecular structures of both closo-compounds were analyzed by X-ray crystallography. Although the closo-compounds exhibited dual emissive patterns in the rigid state (in THF at 77 K), which were assignable to a π-π* local excitation (LE)-based emission (λ_em = ca. 380 nm) on the triazole moieties and to an intramolecular charge transfer (ICT)-based emission (ca. 460 nm) in which the o-carborane units acted as the acceptor (A), at 298 K in THF, the LE-based emission dominated. In contrast, the nido-compounds exhibited an intensive emission originating from ICT transitions in which the o-carborane units reversibly acted as the donor (D). In particular, the positive solvatochromic effects of both nido-compounds and the results of theoretical calculations for the o-carboranyl compounds supported the electronic role of the o-carboranyl unit in each compound. Investigation of the radiative decay mechanism of the closo- and nido-compounds using their quantum efficiency (Φ_em) and decay lifetime (τ_obs) suggested that the ICT-based radiative decay of nido-compounds occurred more efficiently than the LE-based decay of closo-compounds. These results implied that emission from the closo-compounds was drastically enhanced by the deboronation reaction upon exposure to an increasing concentration of fluoride anions, and finally became similar to the emission color (sky-blue) of the nido-compounds.

Experimental proof for emission annihilation through bond elongation at the carbon-carbon bond in o-carborane with fused biphenyl-substituted compounds

Because of their unique luminescence properties, such as aggregation-induced emission (AIE), intense solid-state luminescence and stimuli-responsive luminochromism, aryl-substituted o-carboranes have attracted attention as a platform for developing functional optoelectronic materials. However, there still remains one fundamental issue with the detailed mechanism of solution quenching in AIE behaviors. Aryl-modified o-carboranes with AIE properties exhibit intense emission not in solution but in the solid state. According to quantum calculations and many experimental results, the elongation at the carbon-carbon bond in o-carborane in the excited state, followed by nonradiative decay, has been proposed as a main path for emission annihilation in solution. However, intramolecular rotation would simultaneously occur, and there is a possibility that emission annihilation could be induced by the combination of both bond elongation and rotation. In this study, we designed two types of biphenyl-substituted o-carboranes having fused structures at the neighbor carbon and boron atoms for fixing molecular conformation. In these molecules, bond elongation is allowed, while rotation would be prohibited. From the series of optical measurements and theoretical investigations, we proved that emission annihilation can occur through bond elongation in the absence of rotation. Moreover, we show that bond elongation could be suppressed by introducing a bulky substituent at the adjacent carbon, and emission color tuning was achieved. This is the first example, to the best of our knowledge, to prove that excitation decay can proceed only through bond elongation without electronic perturbation caused by rotation.