Critical review on the chemical reduction of nitroaniline

Green synthesis of silver nanoparticle for catalytic applications and priming study by seed germination

Silver nanoparticles (AgNPs) have been successfully synthesized using leaf extract of Neem (Azadirachta Indica), Mint (Mentha Piperita), Tulsi (Ocimum Tenuiflorum), Bermuda grass (Cynodon Dactylon) and silver salt. As plant extracts produce best capping material for the stabilization of nanoparticles. AgNPs were characterized by UV-Vis spectroscopy in range of 200-800 nm and transmission electron microscopy TEM, XRD and FTIR. The nanoparticles synthesized were mainly in sizes between 25 and 100 nm. They appeared to be spherical, nanotriangles and irregular in shape. Catalytic application was observed for all the aqueous solution of leaves, quantity taken was 1 ml, 2 ml, 3 ml, 4 ml and 5 ml. Furthermore, prepared Ag nanoparticles are also used for seed germination.

Magnetic bio-composite based on zirconium and chitosan modified activated carbon from peanut husk with enhanced antibacterial and adsorptive potential for alizarin red and congo red in wastewater

Creating new adsorbents is crucial for removing contaminants from water due to increased industrialization, which has worsened water pollution in recent years. In this study, a magnetic biocomposite, Zirconium (Zr)-doped chitosan (CS)-coated iron oxide nanoparticles (Fe3O4-NPs)-peanut husk (PH)-based activated carbon (AC) (Zr-CS/Fe3O4-NPs@PH-AC), was synthesized for efficient removal of alizarin red (AR) and congo red (CR) dyes, alongside antibacterial applications. Characterization via scanning electron microscopy (SEM) and Brunauer-Emmett-Teller (BET) analysis revealed micropores and mesopores development due to chemical activation of PH biomaterial and Fe3O4-NPs addition. Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) identified functional groups and structural properties. Vibrating sample magnetometry (VSM) analyzed magnetic properties. Optimal conditions for AR/CR removal were determined, including Zr-CS/Fe3O4-NPs@PH-AC dose, dye dose, contact time, and temperature, achieving maximum removal percentages. Experimentally determined maximum adsorption capacities for AR and CR were 374.3 and 154.1 mg·g-1, respectively. Cytotoxicity studies affirmed the eco-friendly and non-toxic nature of the adsorbent by exhibiting the reduction in the cell viability from 100 % to 88.68 % from the 0 to 200 μg·L-1 respectively. Additionally, the biocomposite exhibited significant antibacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) due to magnetic NPs. The material in this study shows extreme compatibility for numerous applications.

Catalytic reductions of nitroaromatic compounds over heterogeneous catalysts with rhenium sub-nanostructures

Nitroaromatic compounds (NACs) are key contaminants of anthropogenic origin and pose a severe threat to human and animal lives. Although the catalytic activities of Re nanostructures (NSs) are significantly higher than those of other heterogeneous catalysts containing NSs, few studies have been reported on the application of Re-based nanocatalysts for NAC hydrogenation. Accordingly, herein, catalytic reductions of nitrobenzene (NB), 4-nitrophenol (4-NP), 2-nitroaniline (2-NA), 4-nitroaniline (4-NA), and 2,4,6-trinitrophenol (2,4,6-TNP) over new Re-based heterogeneous catalysts were proposed. The catalytic materials were designed to enable effective syntheses and stabilisation of particularly small Re structures over them. Accordingly, catalytic hydrogenations of NACs under mild conditions were significantly enhanced by Re sub-nanostructures (Re-sub-NSs). The highest pseudo-first-order rate constants for NB, 4-NP, 2-NA, 4-NA, and 2,4,6-TNP reductions over the catalyst acquired by stabilising Re using bis(3-aminopropyl)amine (BAPA), which led to Re-sub-NSs with Re concentrations of 16.7 wt%, were 0.210, 0.130, 0.100, 0.180, and 0.090 min-1, respectively.

Synthesis of novel hybrid mesoporous gold iron oxide nanoconstructs for enhanced catalytic reduction and remediation of toxic organic pollutants

The development of highly efficient, rapid, and recyclable nanocatalysts for effective elimination of toxic environmental contaminants remains a high priority in various industrial applications. Herein, we report the preparation of hybrid mesoporous gold-iron oxide nanoparticles (Au-IO NPs) via the nanocasting "inverse hard-templated replication" approach. Dispersed Au NPs were anchored on amine-functionalized iron oxide incorporated APMS (IO@APMS-amine), followed by etching of the silica template to afford hybrid mesoporous Au-IO NPs. The obtained nanoconstructs were fully characterized using electron microscopy, N₂ physisorption, and various spectroscopic techniques. Owing to their magnetic properties, high surface areas, large pore volumes, and mesoporous nature (S _BET = 124 m² g^-1, V _pore = 0.33 cm³ g^-1, and d _pore = 4.5 nm), the resulting Au-IO mesostructures were employed for catalytic reduction of nitroarenes (i.e. nitrophenol and nitroaniline), two of the most common toxic organic pollutants. It was found that these Au-IO NPs act as highly efficient nanocatalysts showing exceptional stabilities (>3 months), enhanced catalytic efficiencies in very short times (∼100% conversions within only 25-60 s), and excellent recyclabilities (up to 8 cycles). The kinetic pseudo-first-order apparent reaction rate constants (k _app) were calculated to be equal to 8.8 × 10^-3 and 23.5 × 10^-3 s^-1 for 2-nitrophenol and 2-nitroaniline reduction, respectively. To our knowledge, this is considered one of the best and fastest Au-based nanocatalysts reported for the catalytic reduction of nitroarenes, promoted mainly by the synergistic cooperation of their high surface area, large pore volume, mesoporous nature, and enhanced Au-NP dispersions. The unique mesoporous hybrid Au-IO nanoconstructs synthesized here make them novel, stable, and approachable nanocatalyst platform for various catalytic industrial processes.

Millettia pinnata plant pod extract-mediated synthesis of Bi2O3 for degradation of water pollutants

In this study, plant extract obtained from pods of Millettia pinnata plant species was employed for nanosynthesis of Bi₂O₃. The as-synthesized semiconductor metal oxide nanoparticles were analyzed using various characterization tools such as X-ray diffraction (XRD), Scanning electron microscope (SEM), ultra violet-visible (UV-Vis), Fourier transform infrared (FTIR), Zeta potential, Raman, and X-ray photoelectron spectroscopy (XPS). The characterization results designate the formation of α and β forms of Bi₂O₃. FESEM images demonstrate rod and flake-like nanostructures ranging from 25 to 70 nm. The green synthesized nanomaterial was found efficient for reduction of 4-nitro phenol (4-NP) and 4-nitro aniline (4-NA). However, it showed better performance toward the reduction of 4-NA. Photocatalytic investigations demonstrated that the green synthesized nanophotocatalyst was capable in degrading Amido Black 10B (AB-10B) dye efficiently under visible light illumination. 98.83% degradation of AB-10B dye was achieved within 120 min of irradiation under optimum conditions of photocatalyst dose and dye concentration. Active species trapping experiments revealed prominent role of superoxide radicals (•O₂^-) while hydroxyl radicals (•OH) played considerable role in the AB-10B photocatalytic degradation process. Moreover, the photostability and reusability assessment study ascertained good performance of the catalyst after four runs of successive cycles.

A Reusable FeCl3∙6H2O/Cationic 2,2′-Bipyridyl Catalytic System for Reduction of Nitroarenes in Water

The association of a commercially-available iron (III) chloride hexahydrate (FeCl3∙6H2O) with cationic 2,2′-bipyridyl in water was proven to be an operationally simple and reusable catalytic system for the highly-selective reduction of nitroarenes to anilines. This procedure was conducted under air using 1–2 mol% of catalyst in the presence of nitroarenes and 4 equiv of hydrazine monohydrate (H2NNH2∙H2O) in neat water at 100 °C for 12 h, and provided high to excellent yields of aniline derivatives. After separation of the aqueous catalytic system from the organic product, the residual aqueous solution could be applied for subsequent reuse, without any catalyst retreatment or regeneration, for several runs with only a slight decrease in activity, proving this process eco-friendly.

Dual-Purpose CuFe2O4-rGO-Based Nanocomposite for Asymmetric Flexible Supercapacitors and Catalytic Reduction of Nitroaromatic Derivatives

Energy storage and environmental pollution are two major global concerns in today's scenario. As a result of the momentous exhaustion of fossil fuels, the generation of energy from renewable sources is gaining immense importance. However, the irregular availability of energy from these renewable sources is the major encounter to achieve sustainable energy harvesting technology, yielding efficient but continuous and reliable energy supplies. Apart from the requirement of state-of-the-art heavy-duty technologies such as transportation, defense, etc., in the modern lifestyle to fulfill the demand for flexible electronic devices, the development of high-performance mechanically flexible all-solid-state supercapacitors is increasing massively. On the other hand, to cater to the need for accessibility of clean water for healthy lives, several technologies are evolving to treat wastewater and groundwater. Hence, the development of efficient catalysts for destroying water pollutants is an attractive approach. Considering these two crucial facets, in this paper, we have demonstrated the multifunctional features of a CuFe2O4-rGO nanocomposite, which was exploited to fabricate a high-performance mechanically flexible all-solid-state asymmetric supercapacitor and simultaneously used as an efficient but easily recoverable catalyst for the transformation of different nitroaromatic compounds. We have also demonstrated the conversion of trifluralin (a herbicide), which is present in the water body as a pollutant, to its corresponding amine derivatives, which can be utilized in the preparation of important pharmaceutical products.

Rhenium Nanostructures Loaded into Amino-Functionalized Resin as a Nanocomposite Catalyst for Hydrogenation of 4-Nitrophenol and 4-Nitroaniline

The present work presents a new nanocomposite catalyst with rhenium nanostructures (ReNSs) for the catalytic hydrogenation of 4-nitrophenol and 4-nitroaniline. The catalyst, based on an anion exchange resin with functionality derived from 1,1'-carboimidazole, was obtained in the process involving anion exchange of ReO4- ions followed by their reduction with NaBH4. The amino functionality present in the resin played a primary role in the stabilization of the resultant ReNSs, consisting of ≈1% (w/w) Re in the polymer mass. The synthesized and capped ReNSs were amorphous and had the average size of 3.45 ± 1.85 nm. Then, the obtained catalyst was used in a catalytic reduction of 4-nitrophenol (4-NP) and 4-nitroaniline (4-NA). Following the pseudo-first-order kinetics, 5 mg of the catalyst led to a 90% conversion of 4-NP with the mass-normalized rate constant (km1) of 6.94 × 10-3 min-1 mg-1, while the corresponding value acquired for 4-NA was 7.2 × 10-3 min-1 mg-1, despite the trace amount of Re in the heterogenous catalyst. The obtained material was also conveniently reused.