Facile fabrication of highly flexible and floatable Cu2O/rGO on Vietnamese traditional paper toward high-performance solar-light-driven photocatalytic degradation of ciprofloxacin antibiotic

Bio-based matrix photocatalysts for photodegradation of antibiotics

Antibiotics development during the last century permitted unprecedent medical advances. However, it is undeniable that there has been an abuse and misuse of antimicrobials in medicine and cosmetics, food production and food processing, in the last decades. The pay toll for human development and consumism is the emergence of extended antimicrobial resistance and omnipresent contamination of the biosphere. The One Health concept recognizes the interconnection of human, environmental and animal health, being impossible alter one without affecting the others. In this context, antibiotic decontamination from water-sources is of upmost importance, with new and more efficient strategies needed. In this framework, light-driven antibiotic degradation has gained interest in the last few years, strongly relying in semiconductor photocatalysts. To improve the semiconductor properties (i.e., efficiency, recovery, bandgap width, dispersibility, wavelength excitation, etc.), bio-based supporting material as photocatalysts matrices have been thoroughly studied, exploring synergetic effects as operating parameters that could improve the photodegradation of antibiotics. The present work describes some of the most relevant advances of the last 5 years on photodegradation of antibiotics and other antimicrobial molecules. It presents the conjugation of semiconductor photocatalysts to different organic scaffolds (biochar and biopolymers), then to describe hybrid systems based on g-C3N4 and finally addressing the emerging use of organic photocatalysts. These systems were developed for the degradation of several antibiotics and antimicrobials, and tested under different conditions, which are analyzed and thoroughly discussed along the work.

High-performance NiO@Fe3O4 magnetic core-shell nanocomposite for catalytic ozonation degradation of pharmaceutical pollution

Pharmaceuticals that are present in superficial waters and wastewater are becoming an ecological concern. Therefore, it is necessary to provide high-performance methods to limit the harmful ecological effects of these materials to achieve a sustainable environment. In this research, NiO@Fe3O4 nanocomposite was prepared by the co-precipitation method and utilized in the catalytic ozonation process for the degradation of 1-cyclopropyl-6-fluoro-4-oxo-7-piperazin-1-yl-quinoline-3-carboxylic acid (ciprofloxacin antibiotic), for the first time. The influencing parameters in the degradation process were analyzed and optimized via response surface methodology (RSM). The optimal ciprofloxacin removal efficiency (100%) was found at pH = 6.5, using 7.5 mg of the NiO@Fe3O4 nanocatalyst and 0.2 g L-1 h-1 ozone (O3) flow, applied over 20 min. Results showed a significant synergistic effect in the analyzed system, which makes the proposed catalytic ozonation process more efficient than using the catalyst and ozone separately. Also, based on the kinetic analysis data, the catalytic ozonation process followed the pseudo-first-order model. In addition, the nanocatalyst showed high recyclability and stability (88.37%) after five consecutive catalytic ozonation process cycles. In conclusion, the NiO@Fe3O4 nanocatalyst/O3 system can be effectively used for the treatment of pharmaceutical contaminants.

Orange peel-derived Cu2O/RGO nanocomposite: Mesoporous binary system for degradation of doxycycline in water

In recent times, there is a mammoth challenge for the world and mankind to deal with the frequent use and misuse of antibiotics and its casual discard to the water bodies. The scavenging degradation of antibiotics which are no longer in use from the environment is a growing concern and compulsively needs to be addressed. Herein, we have devised a novel and green protocol for the synthesis of Cu2O decorated on reduced graphene oxide (Cu2O/RGO) nanocomposite (NCs) using agro-waste, i.e., orange pomace extract (OPE) as a reducing and stabilizing agent for the degradation of antibiotic. The biogenically synthesized Cu2O/RGO NCs proved to emerge as an excellent degradation catalyst exhibiting efficiency of 98.68% within 15 min and 86.38% within 30 min for 10 mg/L DC concentration assisted by ultrasound waves and solar light respectively in separate reactions. The complete degradation process followed a pseudo-first-order kinetics with a rate constant of 0.29 min- 1 and 0.0542 min- 1 for sonocatalytic and photocatalytic degradation process, respectively. Surface area analysis showed that with the increase in the GO amount, the doxycycline degradation increases. An in-depth mechanistic account of sonocatalytic and photocatalytic process has been discussed followed by a radical scavenging test which validated the major role of the synthesized NCs in the degradation of DC. The extraordinary catalytic indulgence of biogenically synthesized graphene-based nanocatalyst opens newer avenues for future research in green chemistry and catalytic field.

Graphical abstract

Supplementary Information

The online version contains supplementary material available at 10.1007/s10668-022-02895-2.

Graphene-based photocatalytic nanocomposites used to treat pharmaceutical and personal care product wastewater: A review

Photocatalytic technology has been widely studied by researchers in the field of environmental purification. This technology can not only completely convert organic pollutants into small molecules of CO₂ and H₂O through redox reactions but also remove metal ions and other inorganic substances from water. This article reviews the research progress of graphene-based photocatalytic nanocomposites in the treatment of wastewater. First, we elucidate the basic principles of photocatalysis, the types of graphene-based nanocomposites, and the role of graphene in photocatalysis (e.g., graphene can accelerate the separation of photon-hole pairs and increase the intensity and range of light absorption). Second, the preparation, characterization, and application of composites in wastewater are introduced. We also discuss the kinetic model of the photocatalytic degradation of pollutants. Finally, the enhancement mechanism of graphene in terms of photocatalysis is not completely clear, and graphene-based photocatalysts with high catalytic efficiency, low cost, and large-scale production have not yet appeared, so there is an urgent need for more extensive and in-depth research.

Novel biogenic silver and gold nanoparticles for multifunctional applications: Green synthesis, catalytic and antibacterial activity, and colorimetric detection of Fe(III) ions

In this study, novel biogenic silver (AgNPs) and gold nanoparticles (AuNPs) were developed using a green approach with Ganoderma lucidum (GL) extract. The optimization of synthesis conditions for the best outcomes was conducted. The prepared materials were characterized and their applicability in catalysis, antibacterial and chemical sensing was comprehensively evaluated. The GL-AgNPs crystals were formed in a spherical shape with an average diameter of 50 nm, while GL-AuNPs exhibited multi-shaped structures with sizes ranging from 15 to 40 nm. As a catalyst, the synthesized nanoparticles showed excellent catalytic activity (>98% in 9 min) and reusability (>95% after five recycles) in converting 4-nitrophenol to 4-aminophenol. As an antimicrobial agent, GL-AuNPs were low effective in inhibiting the growth of bacteria, while GL-AgNPs expressed strong antibacterial activity against all the tested strains. The highest growth inhibition activity of GL-AgNPs was observed against B. subtilis (14.58 ± 0.35 mm), followed by B. cereus (13.8 ± 0.52 mm), P. aeruginosa (12.38 ± 0.64 mm), E. coli (11.3 ± 0.72 mm), and S. aureus (10.41 ± 0.31 mm). Besides, GL-AgNPs also demonstrated high selectivity and sensitivity in the colorimetric detection of Fe³⁺ in aqueous solution with a detection limit of 1.85 nM. Due to the suitable thickness of the protective organic layer and the appropriate particle size, GL-AgNPs validated the triple role as a high-performance catalyst, antimicrobial agent, and nanosensor for environmental monitoring and remediation.

Cu2O/Fe3O4/MIL-101(Fe) nanocomposite as a highly efficient and recyclable visible-light-driven catalyst for degradation of ciprofloxacin

Nowadays, the widespread production and use of antibiotics have increased their presence in wastewater systems, posing a potential threat to the environment and human health. The development of advanced materials for treating antibiotics in wastewater has always received special attention. This study aimed to synthesize a novel Cu₂O/Fe₃O₄/MIL-101(Fe) nanocomposite and use it to degrade ciprofloxacin (CIP) antibiotics in an aqueous solution under visible light irradiation. The optical, structural, and morphological attributes of the developed nanocomposite were analyzed by XRD, FTIR, FE-SEM, TGA, DRS, BET, VSM, and UV-Vis techniques. Optimum circumstances for CIP photocatalytic degradation were acquired in 0.5 g L^-1 of catalyst dosage, pH of 7, and CIP concentration of 20 mg L^-1. The degradation efficiency was achieved 99.2% after 105 min of irradiation in optimum circumstances. The chemical trapping experiments confirmed that hydroxyl and superoxide radicals significantly contributed to the CIP degradation process. The results of this study indicated that Cu₂O/Fe₃O₄/MIL-101(Fe) nanocomposite was a highly stable photocatalyst that could effectively remove antibiotics from aqueous solutions. The CIP degradation efficiency only decreased by 6% after five cycles, indicating the excellent recyclability of Cu₂O/Fe₃O₄/MIL-101(Fe) nanocomposites.

Fabrication of Fe3O4/CuO@C composite from MOF-based materials as an efficient and magnetically separable photocatalyst for degradation of ciprofloxacin antibiotic

In this work, a novel ternary Fe₃O₄/CuO@C composite was fabricated using iron-doped copper 1,4-benzenedicarboxylate metal-organic frameworks as a self-sacrificing template. The morphological, structural, and optical properties of the prepared composite were determined by various techniques, and its photocatalytic behavior was investigated for degradation of ciprofloxacin under visible light irradiation. The Fe₃O₄/CuO@C material presented a porous structure with a rough surface of about 4-20 μm, and was composed of the Fe₃O₄/CuO nanocomposite uniformly distributed on a carbon support. The band gap energy of the obtained composite was found to be 2.0 eV, which was nearly two times lower than that of Fe₃O₄@C and CuO@C. As a result, Fe₃O₄/CuO@C exhibited high photocatalytic activity, achieving a degradation efficiency of 98.5% after 120 min irradiation at the optimum conditions (a catalyst dosage of 0.5 g L^-1, pH of 7, CIP concentration of 15 mg L^-1). The mechanism of ciprofloxacin degradation by Fe₃O₄/CuO@C was elucidated with the main contribution of O₂^-and OH reactive radicals. The new composite catalyst could easily be recovered from the treated solution using an external magnetic field due to its superparamagnetic nature. Fe₃O₄/CuO@C also showed good reusability and stability. The overall results indicated that the synthesized composite has significant application potential for controlling the risk of antibiotics in wastewater.

Novel BiOBr by compositing low-cost biochar for efficient ciprofloxacin removal: the synergy of adsorption and photocatalysis on the degradation kinetics and mechanism insight

C/BiOBr composite materials were synthesized via a simple one-step solvothermal method, with C derived from biochar, which was prepared from the low-cost straw. The samples were characterized by SEM, XRD, XPS and PL. The 2% C/BiOBr composite material showed a noticeable adsorption and photocatalysis synergistic effect to remove CIP. The adsorption rate and degradation rate were 1.45 times and 1.8 times that of BiOBr. The adsorption kinetics and isotherms of CIP on C/BiOBr were analyzed with the pseudo-second-order kinetic and Langmuir models. The degradation efficiency was 96.8% after 60 min of irradiation. High stability and degradability were still maintained after four cycles. The Bi-O-C bond accelerated electron transition and inhibited the rapid photogenerated electron pair recombination. In the degradation process of CIP, ˙O2 - and h+ played a significant role. Experiments proved that C/BiOBr is practical and feasible for the degradation of CIP under the synergistic effect of adsorption and photocatalysis.

Effective reduction of nitrophenols and colorimetric detection of Pb(ii) ions by Siraitia grosvenorii fruit extract capped gold nanoparticles

This study presents a simple and green approach for the synthesis of Siraitia grosvenorii fruit extract capped gold nanoparticles (SG-AuNPs). The SG-AuNPs samples prepared under the optimized conditions were characterized by various techniques (UV-Vis, XRD, FTIR, HR-TEM, EDX, DLS). The biosynthesized nanoparticles were then studied for the reduction of 2-nitrophenol (2-NP) and 3-nitrophenols (3-NP) and for colorimetric detection of Pb2+ ions. The characterization results revealed that the crystals of SG-AuNPs were spherical with an average size of 7.5 nm. The FTIR and DLS analyses proved the presence of the biomolecule layer around AuNPs, which played an important role in stabilizing the nanoparticles. The SG-AuNPs showed excellent catalytic activity in the reduction of 3-NP and 2-NP, achieving complete conversion within 14 min. The catalytic process was endothermic and followed pseudo-first-order kinetics. The activation energy was determined to be 10.64 and 26.53 kJ mol-1 for 2-NP and 3-NP, respectively. SG-AuNPs maintained high catalytic performance after five recycles. The fabricated material was also found to be highly sensitive and selective to Pb2+ ions with the detection limit of 0.018 μM in a linear range of 0-1000 μM. The practicality of the material was validated through the analyses of Pb2+ in mimic pond water samples. The developed nanoparticles could find tremendous applications in environmental monitoring.