Adsorption of arsenic from aqueous solution using a zero-valent iron material modified by the ionic liquid [Hmim]SbF6

Preparation of ionic liquid modified graphene composites and their adsorption mechanism of arsenic (V) in aqueous solution

Graphene (GR) is a new type of carbon-based material that combines many excellent properties. In order to give full play to the excellent properties of graphene and expand its application scope, this study used ionic liquid SbF6 to modify it and successfully prepared ionic liquid modified graphene composites (H/GR), and studied its adsorption mechanism of arsenic in aqueous solution. By investigating the effects of reaction temperature, reaction time, pH, adsorbent (H/GR) dosage, and humic acid concentration on the removal rate of arsenic in aqueous solution, the experimental results showed that when the reaction temperature was 30 °C, reaction time was 1 h, pH was 6, H/GR dosage was 0.1g·L-1, and humic acid (HA) concentration was 10 mg·L-1, the best arsenic removal effect was achieved with a maximum. The removal rate was 99.4%. The equilibrium adsorption capacity was well modeled by the Langmuir, Freundlich, and Tenkin models at 30 °C. The Langmuir adsorption isotherm was the most consistent, with a calculated maximum value of 137.95 mg·g-1, which is higher than most adsorbents in the field. In addition, it was determined that the graphene surface was indeed immobilized with the ionic liquid [Hmim]SbF6 by SEM mapping and EDS energy spectroscopy observation, and the adsorption isotherms and pore size distribution maps of graphene before and after the loading of the ionic liquid were analyzed by BET, which further confirmed a significant increase in the microporosity and porosity of the modified H/GR, and furthermore, it was demonstrated that the arsenic ions are chemically bonded with and indeed adsorbed on the surface of the H/GR by FT-IR and XPS characterization analyses. The results of all experimental data studies indicate that the main mechanism of As(V) removal from water by H/GR is due to electrostatic adsorption, ion exchange, and complexation between the modified graphene itself and the ionic liquid [Hmim]SbF6 itself.

Characterizing spatial dependence of boron, arsenic, and other trace elements for Permian groundwater in Northern Anhui plain coal mining area, China, using spatial autocorrelation index and geostatistics

Anthropogenic and geological factors play an essential role in the variability of groundwater quality, resulting in a weak spatial dependence of groundwater trace elements. Thus, it is an essential study to investigate the factors affecting groundwater quality and its spatial abundance of trace elements (including As, B, and other metalloids). In this study, samples are obtained from a Permian sandstone fracture aquifer in a coal mining area. A multivariate statistical analysis, hydrogeochemistry modeling, and spatial autocorrelation analysis were used to analyze the data. The results showed that Moran index was positive for all trace elements, which had good spatial autocorrelation. The Local indicators of spatial association (LISA) indicated that trace elements were clustered. The hydrogeochemical modeling results indicated that the precipitation and stability of iron-phase minerals, such as rhodochrosite and arsenic (As) absorption on the surface of iron-phase minerals in the aquifer, may limit concentrations in the southern region. The spatial autocorrelations of both As and Boron (B) were positive (high-high) in the western areas, indicating that As contamination occurred from both natural geological causes and human coal mining activities. In contrast, B contamination was mainly linked to the influence of human agricultural or industrial activities. Over 96% of the groundwater concentrations of As (10 μg/L) and B (300 μg/L) in the study area exceeded World Health Organization (WHO) limits. Overall, the results of this work could help decision-makers involved in regional water quality management visualize disperse zones where specific anthropogenic and geological processes may threaten groundwater quality.

Facile synthesis of biopolymer decorated magnetic coreshells for enhanced removal of xenobiotic azo dyes through experimental modelling

Since contamination of xenobiotics in water bodies has become a global issue, their removal is gaining ample attention lately. In the present study, nZVI was synthesized using chitosan for removal of two such xenobitic dyes, Bromocresol green and (BCG) and Brilliant blue (BB), which have high prevalence in freshwater and wastewater matrices. nZVI functionalization prevents nanoparticle aggregation and oxidation, enhancing the removal of BCG and BB with an efficiency of 84.96% and 86.21%, respectively. XRD, FESEM, EDS, and FTIR have been employed to investigate the morphology, elemental composition, and functional groups of chitosan-modified nanoscale-zerovalent iron (CS@nZVI). RSM-CCD model was utilized to assess the combined effect of five independent variables and determine the best condition for maximum dye removal. The interactions between adsorbent dose (2-4 mg), pH (4-8), time (20-40 min), temperature (35-65 0C), and initial dye concentration (40-60 mg/L) was modeled to study the response, i.e., dye removal percentage. The reaction fitted well with Langmuir isotherm and pseudo-first-order kinetics, with a maximum qe value of 426.97 and 452.4 mg/g for BCG and BB, respectively. Thermodynamic analysis revealed the adsorption was spontaneous, and endothermic in nature. Moreover, CS@nZVI could be used up to five cycles of dye removal with remarkable potential for real water samples.