Endowing TADF luminophors with AIE properties through adjusting flexible dendrons for highly efficient solution-processed nondoped OLEDs

Modulatory spin-flip of triplet excitons via diversiform electron-donating units for MR-TADF emitters towards solution-processed narrowband OLEDs

Multiple resonance thermally activated delayed fluorescence (MR-TADF) molecules are emerging as promising candidates for high-resolution organic light-emitting diode (OLED) displays, but MR-TADF emitters always suffer from an unsatisfactory rate constant of reverse intersystem crossing (k RISC) due to inherently low spin orbital coupling strength between excited singlet and triplet states. Herein, we systematically investigate the long-range charge transfer (LRCT) and heavy-atom effects on modulating the excited state natures and energy levels via integrating diversiform electron-donating units with the MR skeleton. Compared with unsubstituted analogues, newly designed MR-TADF emitters exhibit significantly boosted k RISC values and close-to-unity photoluminescence quantum yield especially for tBuCzBN-PXZ (2.5 × 105 s-1) and tBuCzBN-Ph-PSeZ (2.1 × 105 s-1). Leveraging these exceptional properties, the maximum external quantum efficiency values of tBuCzBN-PXZ- and tBuCzBN-Ph-PSeZ-based solution-processed OLEDs can reach 21.3% and 19.4%, which are in the first tier of reported solution-processed MR-TADF binary OLEDs without employing additional sensitizers. This study provides a framework for modulating photoelectrical properties of MR-TADF emitters through fastidiously regulating LRCT and heavy-atom effects.

Intramolecular exciplex featuring a bis-sp3 C-locked acceptor-donor-acceptor sandwich

Intramolecular exciplex systems featuring thermally activated delayed fluorescence (TADF) have garnered significant attention in the realm of organic light-emitting diodes (OLEDs). Nonetheless, the occurrence of organic sandwich intramolecular exciplexes remains rare due to structural limitations and synthetic challenges. Herein, we present a novel rigid acceptor-donor-acceptor (A-D-A) sandwich complex, dSFQP, characterized by two sp3 C-locking moieties. This compound exhibits TADF characteristics facilitated by a multiple through-space charge-transfer process. X-ray crystallographic analysis confirms the distinctive sandwich configuration. The parallel spatial arrangement and minimized A-D-A configuration enhance electronic interactions, resulting in a high photoluminescence quantum yield, rapid reverse intersystem crossing rate, and sluggish nonradiative decay rate. OLEDs employing dSFQP as the dopant achieve a maximum external quantum efficiency (EQE) of 28.5% with a low efficiency roll-off of merely 2.8% at 1000 cd m-2. Even at a high brightness of 10 000 cd m-2, the EQE remains notably high at 17.5%. Our current results provide an effective way to further innovate the design of new organic charge-transfer complexes.

Aggregation Enhanced Thermally Activated Delayed Fluorescence through Spin-Orbit Coupling Regulation

Integrating aggregation-induced emission (AIE) into thermally activated delayed fluorescence (TADF) emitters holds great promise for the advancement of highly efficient organic light emitting diodes (OLEDs). Despite recent advancements, a thorough comprehension of the underlying mechanisms remains imperative for the practical application of such materials. In this work, we introduce a novel approach aimed at modulating the TADF process by manipulating dynamic processes in excited states through aggregation effect. Our findings reveal that aggregation not only enhances both prompt and delayed fluorescence simultaneously but also imposes constraints on molecular reorientation. This constraint reinforces spin-orbit coupling and reduces the energy gap between singlets and triplets. These insights deepen our understanding of the fundamental mechanisms governing the aggregation effect on TADF materials and provide valuable guidance for the design of high-efficiency photoluminescent materials.

Charge transporting and thermally activated delayed fluorescence materials for OLED applications

The design and synthesis of effective charge transporting (CT) and thermally activated delayed fluorescence (TADF) materials are in high demand to obtain high-performing OLED devices. Recently, the significant development in the field of OLEDs has led to the creation of numerous charge transporting and TADF materials with diverse structures. To further improve the device performance, a better understanding of the structural characteristics and structure-property relationships of these materials is essential. Moreover, to enhance the efficiency of OLEDs, all the electrogenerated excitons should be constrained in EMLs. The TADF mechanism can theoretically register 100% IQE through a potent up-conversion method from non-radiative triplet excitons to radiative singlet excitons. In this review, the structural importance, classification, physical properties, and electroluminescence data of some recent charge transporting and TADF materials are summarized and discussed. Moreover, their molecular structural dependence on functional groups and linkers is classified, which can enhance their charge transporting or emitting ability. To offer a potential roadmap for the further development of charge transporting and TADF materials, it is hoped that this study will encourage researchers to acknowledge their important role in OLEDs.

Diaroyl-S,N-ketene Acetals: Red-Shifted Solid-State and Aggregation-Induced Emitters from a One-Pot Synthesis

Symmetric and unsymmetric diaroyl-S,N-ketene acetals can be readily accessed in consecutive syntheses in good to excellent yields by exploiting the inherent nucleophilic character of the methine position. Different aroyl-S,N-ketene acetals as well as acid chlorides yield a library of 19 diaroyl compounds with substitution and linker pattern-tunable emission properties, leading to a significant red-shift of emission in the solid and aggregated state, which was thoroughly investigated. Additionally, the stability of the luminescent aggregates is highly increased. In a follow-up one-pot procedure, pyrazolo-S,N-ketene acetals can easily be accessed employing a nucleophilic cyclocondensation.

Solid-State Emission and Aggregate Emission of Aroyl- S,N-Ketene Acetals Are Controlled and Tuned by Their Substitution Pattern

Aroyl-S,N-ketene acetals are a novel highly diverse class of aggregation-induced emission fluorogens (AIEgens) with a plethora of interesting properties. An expanded compound library of more than 110 dyes set the stage for the first qualitative control and tuneability of all aspects of their photophysical properties. The interplay of substituents not only allows tuning and prediction of the emission color, but also of the intensity, and quantum yields both in solids and in the aggregated state; these can be rationalized by scrutinizing intermolecular interactions in the crystalline solid state.

Organic-Inorganic Hybrid Device with a Novel Deep-Blue Emitter of a Donor-Acceptor Type, with ZnO Nanoparticles for Solution-Processed OLEDs

Two new deep-blue emitters with bipolar properties based on an organoboron acceptor and carbazole donor were newly synthesized: 2-(9H-carbazol-9-yl)-5-(2,12-di-tert-butyl-5,9-dioxa-13b-boranaphtho [3,2,1-de]anthracen-7-yl)-5H-benzo[b]carbazole (TDBA-BCZ) and 5-(2,12-di-tert-butyl-5,9-dioxa-13b-boranaphtho [3,2,1-de]anthracen-7-yl)-8-phenyl-5,8-dihydroindolo[2,3-c]carbazole (TDBA-PCZ). The two emitters showed deep-blue and real-blue photoluminescence emission in their solution and film states, respectively. The doped spin-coated films were prepared using synthesized materials and showed a root-mean-square roughness of less than 0.52 nm, indicating excellent surface morphology. The doped devices, fabricated via a solution process using TDBA-BCZ and TDBA-PCZ as the dopants, showed electroluminescence peaks at 428 and 461 nm, corresponding to the Commission Internationale de L'éclairage (CIE) coordinates of (0.161, 0.046) and (0.151, 0.155), respectively. The external quantum efficiency (EQE)/current efficiency (CE) of the solution-processed forward devices, with TDBA-BCZ and TDBA-PCZ as dopants, were 7.73%/8.67 cd/A and 10.58%/14.24 cd/A, respectively. An inverted OLED device fabricated using rod-shaped ZnO nanoparticles as an electron injection layer showed a CE of 1.09 cd/A and an EQE of 0.30%.

A simple molecular design towards the conversion of a MCL backbone to a multifunctional emitter exhibiting polymorphism, AIE, TADF and MCL

Compared with the large number of single-function materials such as aggregation-induced emission (AIE), mechanochromic luminescence (MCL), or thermally activated delayed fluorescence (TADF) emitters, multifunctional emitting materials offer more opportunities in practical applications. In this report, we provide a simple molecular design strategy towards the conversion of a MCL building block to a multifunctional emitter. Through altering the substituent sites and increasing the number of electron donors and steric hindrance on a normal MCL backbone benzo[d,e]benzo[4,5]imidazo[2,1-a]isoquinolin-7-one, a novel multifunctional material 10,11-bis-(4-diphenylamino-phenyl)-benzo[d,e]benzo[4,5]imidazo[2,1-a]isoquinolin-7-one (10,11-2TPA-BBI) is designed and synthesized. 10,11-2TPA-BBI exhibits simultaneous polymorphism, AIE, MCL and TADF properties. It can form four different aggregate species: yellow solid (YS) and orange solid (OS), orange flake-shaped crystal (OC), and red prism-like crystal (RC). Among them, because of the small energy gaps (ΔE_STs < 0.3 eV) between the singlet and triplet excited states, OS, OC and RC exhibit TADF properties, while YS show normal fluorescence characteristics with a large ΔE_ST of 0.33 eV. OS can be reversibly transformed into YS upon external stimuli, which can be attributed to the emission switch between local excited state and charge transfer state. Crystallographic study indicates that the bulky structure and weak intermolecular interactions account for polymorphism and AIE properties. This work will provide a simple molecular design strategy for multifunctional materials.

Organic molecules with inverted singlet-triplet gaps

According to Hund's multiplicity rule, the energy of the lowest excited triplet state (T1) is always lower than that of the lowest excited singlet state (S1) in organic molecules, resulting in a positive singlet-triplet energy gap (ΔE ST). Therefore, the up-converted reverse intersystem crossing (RISC) from T1 to S1 is an endothermic process, which may lead to the quenching of long-lived triplet excitons in electroluminescence, and subsequently the reduction of device efficiency. Interestingly, organic molecules with inverted singlet-triplet (INVEST) gaps in violation of Hund's multiplicity rule have recently come into the limelight. The unique feature has attracted extensive attention in the fields of organic optoelectronics and photocatalysis over the past few years. For an INVEST molecule possessing a higher T1 with respect to S1, namely a negative ΔE ST, the down-converted RISC from T1 to S1 does not require thermal activation, which is possibly conducive to solving the problems of fast efficiency roll-off and short lifetime of organic light-emitting devices. By virtue of this property, INVEST molecules are recently regarded as a new generation of organic light-emitting materials. In this review, we briefly summarized the significant progress of INVEST molecules in both theoretical calculations and experimental studies, and put forward suggestions and expectations for future research.

Triphenylamine, Carbazole or Tetraphenylethylene-Functionalized Benzothiadiazole Derivatives: Aggregation-Induced Emission (AIE), Solvatochromic and Different Mechanoresponsive Fluorescence Characteristics

The development of mechanochromic fluorophors with high-brightness, solid-state fluorescence is very significant and challenging. Herein, highly solid-state emissive triphenylamine, carbazole and tetraphenylethylene-functionalized benzothiadiazole derivatives were developed. These compounds showed remarkable aggregation-induced emission and solvatochromic fluorescence characteristics. Furthermore, these fluorogenic compounds also displayed different mechanically triggering fluorescence responses.

Asymmetrical-Dendronized TADF Emitters for Efficient Non-doped Solution-Processed OLEDs by Eliminating Degenerate Excited States and Creating Solely Thermal Equilibrium Routes

The mechanism of thermally activated delayed fluorescence (TADF) in dendrimers is not clear. We report that fully-conjugated or fully-nonconjugated structures cause unwanted degenerate excited states due to multiple identical dendrons, which limit their TADF efficiency. We have synthesized asymmetrical "half-dendronized" and "half-dendronized-half-encapsulated" emitters. By eliminating degenerate excited states, the triplet locally excited state is ≥0.3 eV above the lowest triplet charge-transfer state, assuring a solely thermal equilibrium route for an effective spin-flip process. The isolated encapsulating tricarbazole unit can protect the TADF unit, reducing nonradiative decay and enhancing TADF performance. Non-doped solution-processed devices reach a high external quantum efficiency (EQEmax ) of 24.0 % (65.9 cd A-1 , 59.2 lm W-1 ) with CIE coordinates of (0.24, 0.45) with a low efficiency roll-off and EQEs of 23.6 % and 21.3 % at 100 and 500 cd m-2 .

Substituent Effect on AIE mechanism of two coumarin derivatives: uncommon TICT fluorescence in aggregation state

Two coumarin derivatives, 7-diethylamino-3-(4-nitrophenyl)coumarin (DNC) and 7-hydroxy-3-(4-nitrophenyl)coumarin (HNC), were synthesized via Knoevenagel condensation of salicylaldehyde derivatives with 4-nitrophenylacetonitrile and then cyclization reaction. Both of them were characterized by single-crystal X-ray diffraction. The molecules of DNC are stacked via π-π interaction, while the hydrogen bond interactions instead of π-π interaction were observed in the crystal packing of HNC. Both of DNC and HNC showed solvatochromic properties and aggregation-induced emission (AIE) activities, but the AIE characteristics of them were entirely different. HNC exhibited an AIE phenomenon as the result of the restriction of twisted intramolecular charge transfer (TICT), while DNC emitted peculiar dual fluorescence which was assigned to the emission based on the inhibition of TICT state formation and the emission from the TICT state respectively.

Recent progress in thermally activated delayed fluorescence emitters for nondoped organic light-emitting diodes

Nondoped organic light-emitting diodes (OLEDs) have drawn immense attention due to their merits of process simplicity, reduced fabrication cost, etc. To realize high-performance nondoped OLEDs, all electrogenerated excitons should be fully utilized. The thermally activated delayed fluorescence (TADF) mechanism can theoretically realize 100% internal quantum efficiency (IQE) through an effective upconversion process from nonradiative triplet excitons to radiative singlet ones. Nevertheless, exciton quenching, especially related to triplet excitons, is generally very serious in TADF-based nondoped OLEDs, significantly hindering the pace of development. Enormous efforts have been devoted to alleviating the annoying exciton quenching process, and a number of TADF materials for highly efficient nondoped devices have been reported. In this review, we mainly discuss the mechanism, exciton leaking channels, and reported molecular design strategies of TADF emitters for nondoped devices. We further classify their molecular structures depending on the functional A groups and offer an outlook on their future prospects. It is anticipated that this review can entice researchers to recognize the importance of TADF-based nondoped OLEDs and provide a possible guide for their future development.

Progress on Exploring the Luminescent Properties of Organic Molecular Aggregates by Multiscale Modeling

Luminescent molecular aggregates have attracted worldwide attention because of their potential applications in many fields. The luminescent properties of organic aggregates are complicated and highly morphology-dependent, unraveling the intrinsic mechanism behind is urgent. This review summarizes recent works on investigating the structure-property relationships of organic molecular aggregates at different environments, including crystal, cocrystal, amorphous aggregate, and doped systems by multiscale modeling protocol. We aim to explore the influence of intermolecular non-covalent interactions on molecular packing and their photophysical properties and then pave the effective way to design, synthesize, and develop advanced organic luminescent materials.

Thermally Activated Delayed Fluorescence of Carbazole-Benzophenone Dendrimer with Bulky Substituents

Carbazole dendrimers with benzophenone core and bulky terminal substituents were synthesized, and thermally-activated delayed fluorescence (TADF) property was investigated. The adamantane (Ad) substituted dendrimer showed green TADF emission with PLQY...

Highly Efficient Quasi-2D Perovskite Light-Emitting Diodes Incorporating a TADF Dendrimer as an Exciton-Retrieving Additive

Although small organics or polymer additives have been introduced to enhance film formation and radiative recombination of perovskite light-emitting diodes (PeLEDs), the exciton utilization and quantum efficiency need further optimization. Here, we introduce a thermal-activated delayed fluorescence (TADF) dendrimer as an additive to enhance the surface coverage and reduce the trap state of the grain boundary. More importantly, the TADF nature of such an additive can retrieve the exciton dissociated from perovskite or trapped by the grain boundary and then transfer the energy back to emissive perovskite through the Förster energy transfer process. Since the triplets can be reused by reverse intersystem crossing in such a TADF additive, the theoretical exciton utilization is 100%. As a result, the optimized PeLEDs cooperating with a TADF additive achieved a high current efficiency of 39.0 cd A^-1 and an ultrabright luminescence of 18,000 cd m^-2, which are almost 5 times higher than those of the control device without an additive. Moreover, the device stability monitored by half-lifetime at 1000 cd m^-2 enhanced 2 times after introducing the TADF dendrimer as an additive. The parent dendrimer without a TADF feature was also synthesized as an additive to explore the mechanism action, which found that 54% enhancement of device efficiency can be attributed to defect passivating, while 46% was assigned to retrieved energy. This research first demonstrates that the TADF dendrimer is a promising exciton-retrieving additive for enhancing the performance of PeLEDs by passivating defect, filling up grain boundary, and retrieving leakage exciton.

High-Efficiency Solution-Processable OLEDs by Employing Thermally Activated Delayed Fluorescence Emitters with Multiple Conversion Channels of Triplet Excitons

The state-of-the-art luminescent materials are gained widely by utilizing thermally activated delayed fluorescence (TADF) mechanism. However, the feasible molecular designing strategy of fully exploiting triplet excitons to enhance TADF properties is still in demand. Herein, TADF emitters with multiple conversion channels of triplet excitons are designed by concisely halogenating the electron acceptors containing carbonyl moiety. Compared with the chlorinated and brominated analogues, the fluorinated emitter exhibits distinguishing molecular stacking structures, participating in the formation of trimers through integrating CH···F and C═O···H hydrogen bonds together. It is also demonstrated that the multiple channels can be involved synergistically to accelerate the spin-flip of triplet excitons, and to take charge of the relatively superior reverse intersystem crossing constant rate of 6.20 × 105 s-1 , and thus excellent photoluminescence quantum yields over 90% can easily be achieved. Then the solution-processable organic light emitting diode based on fluorinated emitter can achieve a record-high external quantum efficiency value of 27.13% and relatively low efficiency roll-off with remaining 24.74% at 1000 cd m-2 . This result manifests the significance of enhancing photophysical properties through constructing multiple conversion channels of triplets excitons for high-efficiency TADF emitters and provides a guideline for the future study.