Structural and process controls of AIEgens for NIR-II theranostics

Unlocking the NIR-II AIEgen for High Brightness through Intramolecular Electrostatic Locking

Fluorescent imaging and biosensing in the near-infrared-II (NIR-II) window holds great promise for non-invasive, radiation-free, and rapid-response clinical diagnosis. However, it's still challenging to develop bright NIR-II fluorophores. In this study, we report a new strategy to enhance the brightness of NIR-II aggregation-induced emission (AIE) fluorophores through intramolecular electrostatic locking. By introducing sulfur atoms into the side chains of the thiophene bridge in TSEH molecule, the molecular motion of the conjugated backbone can be locked through intramolecular interactions between the sulfur and nitrogen atoms. This leads to enhanced NIR-II fluorescent emission of TSEH in both solution and aggregation states. Notably, the encapsulated nanoparticles (NPs) of TSEH show enhanced brightness, which is 2.6-fold higher than TEH NPs with alkyl side chains. The in vivo experiments reveal the feasibility of TSEH NPs in vascular and tumor imaging with a high signal-to-background ratio and precise resection for tiny tumors. In addition, polystyrene nanospheres encapsulated with TSEH are utilized for antigen detection in lateral flow assays, showing a signal-to-noise ratio 1.9-fold higher than the TEH counterpart in detecting low-concentration antigens. This work highlights the potential for developing bright NIR-II fluorophores through intramolecular electrostatic locking and their potential applications in clinical diagnosis and biomedical research.

A TICT-AIE activated dual-channel fluorescence-on probe to reveal the dynamics mechanosensing of lipid droplets during ferroptosis

Mechanical forces play a crucial role in cellular processes, including ferroptosis, a form of regulated cell death associated with various diseases. However, the mechanical aspects of organelle lipid droplets (LDs) during ferroptosis are poorly understood. In this study, we designed and synthesized a fluorescent probe, TPE-V1, to enable real-time monitoring of LDs' viscosity using a dual-channel fluorescence-on model (red channel at 617 nm and NIR channel at 710 nm). The fluorescent imaging of using TPE-V1 was achieved due to the integrated mechanisms of the twisted intramolecular charge transfer (TICT) and aggregation-induced emission (AIE). Through dual-emission channel fluorescence imaging, we observed the enhanced mechanical energy of LDs triggering cellular mechanosensing, including ferroptosis and cell deformation. Theoretical calculations confirmed the probe's behavior, showing that high-viscosity media prevented the rotation processes and restored fluorescence quenching in low viscosity. These findings suggest that our TICT-TPE design strategy provides a practical approach to study LDs' mechanical properties during ferroptosis. This development enhances our understanding of the interplay between mechanical forces and LDs, contributing to the knowledge of ferroptotic cell death and potential therapeutic interventions targeting dysregulated cell death processes.

Julolidinyl aza-BODIPYs as NIR-II fluorophores for the bioimaging of nanocarriers

The aggregation-caused quenching (ACQ) rationale has been employed to improve the fluorescence imaging accuracy of nanocarriers by precluding free probe-derived interferences. However, its usefulness is undermined by limited penetration and low spatiotemporal resolution of NIR-I (700-900 nm) bioimaging owing to absorption and diffraction by biological tissues and tissue-derived autofluorescence. This study aimed to develop ACQ-based NIR-II (1000-1700 nm) probes to further improve the imaging resolution and accuracy. The strategy employed is to install highly planar and electron-rich julolidine into the 3,5-position of aza-BODIPY based on the larger substituent effects. The newly developed probes displayed remarkable photophysical properties, with intense absorption centered at approximately 850 nm and bright emission in the 950-1300 nm region. Compared with the NIR-I counterpart P2, the NIR-II probes demonstrated superior water sensitivity and quenching stability. ACQ1 and ACQ6 exhibited more promising ACQ effects with absolute fluorescence quenching at water fractions above 40% and higher quenching stability with less than 2.0% fluorescence reillumination in plasma after 24 h of incubation. Theoretical calculations verified that molecular planarity is more important than hydrophobicity for ACQ properties. Additionally, in vivo and ex vivo reillumination studies revealed less than 2.5% signal interference from prequenched ACQ1, in contrast to 15% for P2.

Synthesis, Fluorescence, and Bioactivity of Novel Isatin Derivatives

The isatin group is widespread in nature and is considered to be a privileged building block for drug discovery. In order to develop novel SHP1 inhibitors with fluorescent properties as tools for SHP1 biology research, this work designed and synthesized a series of isatin derivatives. The presentive compound 5a showed good inhibitory activity against SHP1PTP with IC50 of 11 ± 3 μM, displayed about 92% inhibitory rate against MV-4-11 cell proliferation at the concentration of 20 μM, exhibited suitable fluorescent properties with a long emission wavelength and a large Stokes shift, and presented blue fluorescent imaging in HeLa cells with low cytotoxicity. This study could offer chemical tool to further understand SHP1 biology and develop novel SHP1 inhibitors in therapy.

An AIEgen and Iodine Double-Ornamented Platinum(II) Complex for Bimodal Imaging-Guided Chemo-Photodynamic Combination Therapy

Real-time biodistribution monitoring and enhancing the therapeutic efficacy of platinum(II)-based anticancer drugs are urgently required to elevate their clinical performance. Herein, a tetraphenylethene derivative (TP) with aggregation-induced emission (AIE) properties and an iodine atom are selected as ligands to endow platinum (II) complex TP-Pt-I with real-time in vivo self-tracking ability by fluorescence (FL) and computerized tomography (CT) imaging, and improved anticancer efficacy by the combination of chemotherapy and photodynamic therapy. Especially, benefiting from the formation of a donor-acceptor-donor structure between the AIE photosensitizer TP and Pt-I moiety, the heavy atom effects of Pt and I, and the presence of I, TP-Pt-I displayed red-shifted absorption and emission wavelengths, enhanced ROS generation efficiency, and improved CT imaging capacity compared with the pristine TP and the control agent TP-Pt-Cl. As a result, the enhanced intratumoral accumulation of TP-Pt-I loaded nanoparticles is readily revealed by dual-modal FL and CT imaging with high contrast. Meanwhile, the TP-Pt-I nanoparticles show significantly improved tumor growth-inhibiting effects on an MCF-7 xenograft murine model by combining the chemotherapeutic effects of platinum(II) and the photodynamic effects of TP. This self-tracking therapeutic complex thus provides a new strategy for improving the therapeutic outcomes of platinum(II)-based anticancer drugs.

High-performance near-infrared OLEDs maximized at 925 nm and 1022 nm through interfacial energy transfer

Using a transfer printing technique, we imprint a layer of a designated near-infrared fluorescent dye BTP-eC9 onto a thin layer of Pt(II) complex, both of which are capable of self-assembly. Before integration, the Pt(II) complex layer gives intense deep-red phosphorescence maximized at ~740 nm, while the BTP-eC9 layer shows fluorescence at > 900 nm. Organic light emitting diodes fabricated under the imprinted bilayer architecture harvest most of Pt(II) complex phosphorescence, which undergoes triplet-to-singlet energy transfer to the BTP-eC9 dye, resulting in high-intensity hyperfluorescence at > 900 nm. As a result, devices achieve 925 nm emission with external quantum efficiencies of 2.24% (1.94 ± 0.18%) and maximum radiance of 39.97 W sr-1 m-2. Comprehensive morphology, spectroscopy and device analyses support the mechanism of interfacial energy transfer, which also is proved successful for BTPV-eC9 dye (1022 nm), making bright and far-reaching the prospective of hyperfluorescent OLEDs in the near-infrared region.

Understanding the Novel Approach of Nanoferroptosis for Cancer Therapy

As a new form of regulated cell death, ferroptosis has unraveled the unsolicited theory of intrinsic apoptosis resistance by cancer cells. The molecular mechanism of ferroptosis depends on the induction of oxidative stress through excessive reactive oxygen species accumulation and glutathione depletion to damage the structural integrity of cells. Due to their high loading and structural tunability, nanocarriers can escort the delivery of ferro-therapeutics to the desired site through enhanced permeation or retention effect or by active targeting. This review shed light on the necessity of iron in cancer cell growth and the fascinating features of ferroptosis in regulating the cell cycle and metastasis. Additionally, we discussed the effect of ferroptosis-mediated therapy using nanoplatforms and their chemical basis in overcoming the barriers to cancer therapy.

Aggregation-enhanced photothermal therapy of organic dyes

Photothermal therapy (PTT) represents a groundbreaking approach to targeted disease treatment by harnessing the conversion of light into heat. The efficacy of PTT heavily relies on the capabilities of photothermal agents (PTAs). Among PTAs, those based on organic dyes exhibit notable characteristics such as adjustable light absorption wavelengths, high extinction coefficients, and high compatibility in biological systems. However, a challenge associated with organic dye-based PTAs lies in their efficiency in converting light into heat while maintaining stability. Manipulating dye aggregation is a key aspect in modulating non-radiative decay pathways, aiming to augment heat generation. This review delves into various strategies aimed at improving photothermal performance through constructing aggregation. These strategies including protecting dyes from photodegradation, inhibiting non-photothermal pathways, maintaining space within molecular aggregates, and introducing intermolecular photophysical processes. Overall, this review highlights the precision-driven assembly of organic dyes as a promising frontier in enhancing PTT-related applications. This article is categorized under: Therapeutic Approaches and Drug Discovery > Emerging Technologies Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease Diagnostic Tools > In Vivo Nanodiagnostics and Imaging.

Hierarchical Self-Assembly Molecular Building Blocks as Intelligent Nanoplatforms for Ovarian Cancer Theranostics

Hierarchical self-assembly from simple building blocks to complex polymers is a feasible approach to constructing multi-functional smart materials. However, the polymerization process of polymers often involves challenges such as the design of building blocks and the drive of external energy. Here, a hierarchical self-assembly with self-driven and energy conversion capabilities based on p-aminophenol and diethylenetriamine building blocks is reported. Through β-galactosidase (β-Gal) specific activation to the self-assembly, the intelligent assemblies (oligomer and superpolymer) with excellent photothermal and fluorescent properties are dynamically formed in situ, and thus the sensitive multi-mode detection of β-Gal activity is realized. Based on the overexpression of β-Gal in ovarian cancer cells, the self-assembly superpolymer is specifically generated in SKOV-3 cells to achieve fluorescence imaging. The photothermal therapeutic ability of the self-assembly oligomer (synthesized in vitro) is evaluated by a subcutaneous ovarian cancer model, showing satisfactory anti-tumor effects. This work expands the construction of intelligent assemblies through the self-driven cascade assembly of small molecules and provides new methods for the diagnosis and treatment of ovarian cancer.

Biocompatible and Water-Soluble Shortwave-Infrared (SWIR)-Emitting Cyanine-Based Fluorescent Probes for In Vivo Multiplexed Molecular Imaging

Extending molecular imaging into the shortwave-infrared (SWIR, 900-1400 nm) region provides deep tissue visualization of biomolecules in the living system resulting from the low tissue autofluorescence and scattering. Looking at the Food and Drug Administration-approved and clinical trial near-infrared (NIR) probes, only indocyanine green (ICG) and its analogues have been approved for biomedical applications. Excitation wavelength less than 800 nm limits these probes from deep tissue penetration and noninvasive fluorescence imaging. Herein, we present the synthesis of ICG-based π-conjugation-extended cyanine dyes, ICG-C9 and ICG-C11 as biocompatible, and water-soluble SWIR-emitting probes with emission wavelengths of 922 and 1010 nm in water, respectively. Also, ICG-, ICG-C9-, and ICG-C11-based fluorescent labeling agents have been synthesized for the development of SWIR molecular imaging probes. Using the fluorescence of ICG, ICG-C9, and ICG-C11, we demonstrate three-color SWIR fluorescence imaging of breast tumors by visualizing surface receptors (EGFR and HER2) and tumor vasculature in living mice. Furthermore, we demonstrate two-color SWIR fluorescence imaging of breast tumor apoptosis using an ICG-conjugated anticancer drug, Kadcyla and ICG-C9 or ICG-C11-conjugated annexin V. Finally, we show long-term (38 days) SWIR fluorescence imaging of breast tumor shrinkage induced by Kadcyla. This study provides a general strategy for multiplexed fluorescence molecular imaging with biocompatible and water-soluble SWIR-emitting cyanine probes.

Rotor-based image-guided therapy of glioblastoma

Glioblastoma (GBM), deep in the brain, is more challenging to diagnose and treat than other tumors. Such challenges have blocked the development of high-impact therapeutic approaches that combine reliable diagnosis with targeted therapy. Herein, effective cyanine dyes (IRLy) with the near-infrared two region (NIR-II) adsorption and aggregation-induced emission (AIE) have been developed via an "extended conjugation & molecular rotor" strategy for multimodal imaging and phototherapy of deep orthotopic GBM. IRLy was synthesized successfully through a rational molecular rotor modification with stronger penetration, higher signal-to-noise ratio, and a high photothermal conversion efficiency (PCE) up to ∼60%, which can achieve efficient NIR-II photo-response. The multifunctional nanoparticles (Tf-IRLy NPs) were further fabricated to cross the blood-brain barrier (BBB) introducing transferrin (Tf) as a targeting ligand. Tf-IRLy NPs showed high biosafety and good tumor enrichment for GBM in vitro and in vivo, and thus enabled accurate, efficient, and less invasive NIR-II multimodal imaging and photothermal therapy. This versatile Tf-IRLy nanosystem can provide a reference for the efficient, precise and low-invasive multi-synergistic brain targeted photo-theranostics. In addition, the "extended conjugation & molecular rotor" strategy can be used to guide the design of other photothermal agents.

Novel Near-Infrared-II In Vivo Visualization Revealed Rapid Calcium Intestine Turnover in Daphnia magna with Delayed Impact by Cadmium and Acidification

Calcium is a highly demanded metal, and its transport across the intestine of Daphnia magna remains a significant unresolved question. Due to technical constraints, the visualization of the kinetic process of Ca passage through D. magna has been challenging. Here, we developed the second near-infrared Ca sensor (NIR-II Ca) and conducted real-time in vivo imaging of Ca in daphnids with a high signal-to-noise ratio, deep tissue penetration, and minimal damage. Through the utilization of the NIR-II Ca sensor, we for the first time visualized and quantified the kinetic process of Ca passage in the intestine in real time. The results revealed that trophically available Ca passed through the intestines in 24 h, whereas waterborne Ca required only 35 min. This rapid "flushing through" mechanism established waterborne Ca as the primary source of Ca absorption. However, environmental stressors such as water acidification and cadmium significantly delayed the Ca passage and absorption. The development of NIR imaging and sensors allows for real-time dynamic visualization of contaminants/nutrients in organisms and holds great potential as a powerful tool for future studies into material kinetic processes in living animals.

Application of gold nanoclusters in fluorescence sensing and biological detection

Gold nanoclusters (Au NCs) exhibit broad fluorescent spectra from visible to near-infrared regions and good enzyme-mimicking catalytic activities. Combined with excellent stability and exceptional biocompatibility, the Au NCs have been widely exploited in biomedicine such as biocatalysis and bioimaging. Especially, the long fluorescence lifetime and large Stokes shift attribute Au NCs to good probes for fluorescence sensing and biological detection. In this review, we systematically summarized the molecular structure and fluorescence properties of Au NCs and highlighted the advances in fluorescence sensing and biological detection. The Au NCs display high sensitivity and specificity in detecting iodine ions, metal ions, and reactive oxygen species, as well as certain diseases based on the fluorescence activities of Au NCs. We also proposed several points to improve the practicability and accelerate the clinical translation of the Au NCs.

Multifunctional agents based on 3-dicycanovinylindan-1-one acceptor: Molecular design and phototheranostic application

Phototherapy, including photodynamic therapy (PDT) and photothermal therapy (PTT), has garnered considerable attention in recent years, owing to its precise spatiotemporal accuracy with minimal side effects. Recent research reveals that the combination of PDT and PTT exhibits a remarkable anti-tumor efficacy compared to PDT or PTT alone, which has put forward the new requirements of multifunctional phototherapy agents with both high photosensitization and photothermal conversion efficiencies. Among the newly developed multifunctional agents, the ones with one or two 3-dicycanovinylindan-1-one (IC) moieties as the acceptors attract much more attention, due to their long-wavelength excitation and emission, as well as high phototherapy efficacies. Therefore, in this review, the latest advancement of multifunctional agents based on IC acceptor is summarized. Especially, we focus on the structure-property relationships of the agents, as well as their biomedical application in anti-tumor therapy or image-guided therapy. Our perspective on the further future development of this field is also discussed to conclude.

Molecular Engineering of Bright NIR-I/NIR-II Nanofluorophores for High-Resolution Bioimaging and Tumor Detection in Vivo

A comprehensive approach for the construction of NIR-I/NIR-II nanofluorophores with exceptional brightness and excellent chemo- and photostability has been developed. This study first confirmed that the amphiphilic molecules with stronger hydrophobic moieties and weaker hydrophilic moieties are superior candidates for constructing brighter nanofluorophores, which are attributed to its higher efficiency in suppressing the intramolecular charge transfer/aggregation-caused fluorescence quenching of donor-acceptor-donor type fluorophores. The prepared nanofluorophore demonstrates a fluorescence quantum yield exceeding 4.5% in aqueous solution and exhibits a strong NIR-II tail emission up to 1300 nm. The superior performance of the nanofluorophore enabled the achievement of high-resolution whole-body vessel imaging and brain vessel imaging, as well as high-contrast fluorescence imaging of the lymphatic system in vivo. Furthermore, their potential for highly sensitive fluorescence detection of tiny tumors in vivo has been successfully confirmed, thus supporting their future applications in precise fluorescence imaging-guided surgery in the early stages of cancer.

Atomically precise photothermal nanomachines

Interfacing molecular machines to inorganic nanoparticles can, in principle, lead to hybrid nanomachines with extended functions. Here we demonstrate a ligand engineering approach to develop atomically precise hybrid nanomachines by interfacing gold nanoclusters with tetraphenylethylene molecular rotors. When gold nanoclusters are irradiated with near-infrared light, the rotation of surface-decorated tetraphenylethylene moieties actively dissipates the absorbed energy to sustain the photothermal nanomachine with an intact structure and steady efficiency. Solid-state nuclear magnetic resonance and femtosecond transient absorption spectroscopy reveal that the photogenerated hot electrons are rapidly cooled down within picoseconds via electron-phonon coupling in the nanomachine. We find that the nanomachine remains structurally and functionally intact in mammalian cells and in vivo. A single dose of near-infrared irradiation can effectively ablate tumours without recurrence in tumour-bearing mice, which shows promise in the development of nanomachine-based theranostics.

Promoting the Near-Infrared-II Fluorescence of Diketopyrrolopyrrole-Based Dye for In Vivo Imaging via Donor Engineering

Small-molecule dyes for fluorescence imaging in the second near-infrared region (NIR-II, 900-1880 nm) hold great promise in clinical applications. Constructing donor-acceptor-donor (D-A-D) architectures has been recognized to be a feasible strategy to achieve NIR-II fluorescence. However, the development of NIR-II dyes via such a scheme is hampered by the lack of high-performance electron acceptors and donors. Diketopyrrolopyrrole (DPP), as a classic organic optoelectronic material, enjoys strong light absorption, high fluorescence quantum yield (QY), and facile derivatization. Nevertheless, its application in the NIR-II imaging field has been hindered by its limited electron-withdrawing ability and the aggregation-caused quenching (ACQ) effect resulting from the planar structure of DPP. Herein, with DPP as an electron acceptor and through donor engineering, we have successfully designed and synthesized a DPP-based dye named T-27, in which the strong D-A interaction confers excellent NIR absorption and high-brightness NIR-II fluorescence tail emission. By strategically introducing long alkyl chains on the donor unit to increase intermolecular spacing and reduce the influence of solvent molecules, T-27 exhibits an improved anti-ACQ effect in aqueous solutions. After being encapsulated into DSPE-PEG2000, T-27 nanoparticles (NPs) show a relative NIR-II fluorescence QY of 3.4% in water, representing the highest value among the DPP-based NIR-II dyes reported to date. The outstanding photophysical properties of T-27 NPs enable multimode NIR-IIa bioimaging under 808 nm excitation. As such, the T-27 NPs can distinguish mouse femoral vein and artery and achieve cerebral vascular microscopic imaging with a penetrating depth of 800 μm, demonstrating the capability for high-resolution deep-tissue imaging. This work holds significant potential in the field of bioimaging and provides a new strategy for developing bright NIR-II dyes.

A one-two punch targeting reactive oxygen species and fibril for rescuing Alzheimer's disease

Toxic amyloid-beta (Aβ) plaque and harmful inflammation are two leading symptoms of Alzheimer's disease (AD). However, precise AD therapy is unrealizable due to the lack of dual-targeting therapy function, poor BBB penetration, and low imaging sensitivity. Here, we design a near-infrared-II aggregation-induced emission (AIE) nanotheranostic for precise AD therapy. The anti-quenching emission at 1350 nm accurately monitors the in vivo BBB penetration and specifically binding of nanotheranostic with plaques. Triggered by reactive oxygen species (ROS), two encapsulated therapeutic-type AIE molecules are controllably released to activate a self-enhanced therapy program. One specifically inhibits the Aβ fibrils formation, degrades Aβ fibrils, and prevents the reaggregation via multi-competitive interactions that are verified by computational analysis, which further alleviates the inflammation. Another effectively scavenges ROS and inflammation to remodel the cerebral redox balance and enhances the therapy effect, together reversing the neurotoxicity and achieving effective behavioral and cognitive improvements in the female AD mice model.

Micro assembly strategies for enhancing solid-state emission of cellulose nanocrystals and application in photoluminescent inks

Crystalline cellulose exhibits photoluminescent properties, making it ideal for solid-state emission through properly assembling crystal arrays. However, assembling in water or other polar solvents poses structural integrity issues. To address this, a micro-assembly method is proposed. Cellulose nanocrystals (CNCs) are organized within a sub-micrometer-sized ZIF-8 metal-organic framework and coated with TiO2. Notably, the assembly within ZIF-8 improves the CNCs' emission quantum yield to 37.8 %. The bonding between ZIF-8 and CNCs relies on electrostatic interactions and hydrogen bonds, which are sensitive to polar solvents. Yet, the sturdy coordination bonds between TiO2 and ZIF-8 enhance resistance. Solvent-resistance tests confirm that TiO2 prevents CNC assembly breakdown, resulting in only an 8.0 % drop in photoluminescent intensity in an alkaline solution after 24 h, compared to 33 % without the coating. For anti-counterfeiting purposes, TiO2@ZIF-8@CNC is combined with a polymer matrix, allowing information to be revealed under specific wavelengths using screen-printed labels.

Thiophene π-bridge-based second near-infrared luminogens with aggregation-induced emission for biomedical applications

In the past 5 years, aggregation-induced emission luminogens (AIEgens) with emission in the second near-infrared (NIR-II) optical window have aroused great interest in bioimaging and disease phototheranostics, benefiting from the merits of deep penetration depth, reduced light scatting, high spatial resolution, and minimal photodamage. To construct NIR-II AIEgens, thiophene derivatives are frequently adopted as π-bridge by virtue of their electron-rich feature and good modifiability. Herein, we summarize the recent progress of NIR-II AIEgens by employing thiophene derivatives as π-bridge mainly compassing unsubstituted thiophene, alkyl thiophene, 3,4-ethylenedioxythiophene, and benzo[c]thiophene, with a discussion on their structure-property relationships and biomedical applications. Finally, a brief conclusion and perspective on this fascinating area are offered.

Polymeric engineering of AIEgens for NIR-II fluorescence imaging and detection of abdominal metastases of ovarian cancer in vivo

A polymeric engineering design principle is proposed for the construction of small-sized (∼20 nm) NIR-II AIEgen-doped nanodots (AIEdots) with high brightness and prolonged circulation time in blood vessels. With the utilization of the as-designed NIR-II AIEdots, the successful achievement of high-resolution NIR-II fluorescence imaging of tumor vessels and precise detection of abdominal metastases of ovarian cancer has been attained.

Dithienoazepine-Based Near-Infrared Dyes: Janus-Faced Effects of a Thiophene-Fused Structure on Antiaromatic Azepines

We here disclose that the incorporation of thiophene rings into a seven-membered 8π azepine in a fused fashion produces a useful antiaromatic core for near-infrared (NIR) dyes. In contrast to dibenzazepine derivatives with bent structures, dithieno-fused derivatives with electron-accepting groups adopt flat conformations in the ground state. The dithieno-fused derivatives exhibited broad absorption spectra that cover the visible region as well as sharp emission bands in the NIR region, which are considerably red-shifted relative to those of the dibenzo-fused congeners. Theoretical study revealed two contradictory effects of the less-aromatic thiophene-fused structure, i.e., the enhancement of the antiaromaticity of the adjacent azepine ring and the relief of the antiaromaticity through the contribution of a quinoidal resonance form. The combination of the dithienoazepine core with cationic electron-accepting groups produced a NIR fluorescent dye with an emission at 878 nm in solution.

Bioorthogonal Guided Activation of cGAS-STING by AIE Photosensitizer Nanoparticles for Targeted Tumor Therapy and Imaging

Photodynamic therapy (PDT) and photothermal therapy (PTT) leverage reactive oxygen species (ROS) and control local hyperthermia by photosensitizer to perturb intracellular redox equilibrium, inducing DNA damage in both mitochondria and nucleus, activating the cGAS-STING pathway, ultimately eliciting antitumor immune responses. However, current photosensitizers are encumbered by limitations such as suboptimal tumor targeting, aggregation-caused quenching (ACQ), and restricted excitation and emission wavelengths. Here, this work designs novel nanoparticles based on aggregation-induced emission (AIE) photosensitizer (BODTPE) for targeted tumor therapy and near-infrared II fluorescence imaging (NIR-II FLI) with enhanced PDT/PTT effects. BODTPE is employed as a monomer, dibenzocyclooctyne (DBCO)-PEG2k -amine serving as an end-capping polymer, to synthesize a BODTPE-containing polymer (DBD). Further, through self-assembly, DBD and mPEG-DSPE2k combined to form nanoparticles (NP-DBD). Notably, the DBCO on the surface of NP-DBD can react with azide groups on cancer cells pretreated with Ac4 ManNAz through a copper-free click reaction. This innovative formulation led to targeted accumulation of NP-DBD within tumor sites, a phenomenon convincingly demonstrated in murine tumor models subjected to N-azidoacetylmannosamine-tetraacylated (Ac4 ManNAz) pretreatment. Significantly, NP-DBD exhibits a multifaceted effect encompassing PDT/PTT/NIR-II FLI upon 808 nm laser irradiation, thereby better activating the cGAS-STING pathway, culminating in a compelling tumor inhibition effect augmented by robust immune modulation.

PDI-Based Organic Small Molecule Regulated by Inter/Intramolecular Interactions for Efficient Solar Vapor Generation

Organic small molecules with processing feasibility, structural diversity, and fine-tuned properties have the potential applications in solar vapor generation. However, the common defects of narrow solar absorption, low photothermal conversion efficiency, and photobleaching result in limited materials available and unsatisfactory evaporation performance. Herein, the perylene diimide (PDI) derivatives are exploited as stable sunlight absorbers for solar vapor generation. Particularly, the N,N'-bis(3,4,5-trimethoxyphenyl)-3,4,9,10-perylenetetracarboxylic diimide (PDI-DTMA) is well-designed with donor-acceptor-donor configuration based on plane rigid PDI core. The efficient photothermal conversion is enabled through strong intermolecular π-π stacking and intramolecular charge transfer, as revealed by experimental demonstration and theoretical calculation. The PDI-DTMA with a narrow band gap of 1.17 eV exhibits expanded absorption spectrum and enhanced nonradiative transition capability. The 3D hybrid hydrogels (PPHs) combining PDI-DTMA and polyvinyl alcohol are constructed. With the synergistic effect of solar-to-heat conversion, thermal localization management, water activation, and unobstructed water transmission of PPHs, the high water evaporation rates can reach 3.61-10.07 kg m-2 h-1 under one sun. The hydrogels also possess great potential in seawater desalination and sewage treatment. Overall, this work provides valuable insights into the design of photothermal organic small molecules and demonstrates their potentials in solar water evaporation.

Multifunctional Nanoplatform for NIR-II Imaging-Guided Synergistic Oncotherapy

Tumors are a major public health issue of concern to humans, seriously threatening the safety of people's lives and property. With the increasing demand for early and accurate diagnosis and efficient treatment of tumors, noninvasive optical imaging (including fluorescence imaging and photoacoustic imaging) and tumor synergistic therapies (phototherapy synergistic with chemotherapy, phototherapy synergistic with immunotherapy, etc.) have received increasing attention. In particular, light in the near-infrared second region (NIR-II) has triggered great research interest due to its penetration depth, minimal tissue autofluorescence, and reduced tissue absorption and scattering. Nanomaterials with many advantages, such as high brightness, great photostability, tunable photophysical properties, and excellent biosafety offer unlimited possibilities and are being investigated for NIR-II tumor imaging-guided synergistic oncotherapy. In recent years, many researchers have tried various approaches to investigate nanomaterials, including gold nanomaterials, two-dimensional materials, metal sulfide oxides, polymers, carbon nanomaterials, NIR-II dyes, and other nanomaterials for tumor diagnostic and therapeutic integrated nanoplatform construction. In this paper, the application of multifunctional nanomaterials in tumor NIR-II imaging and collaborative therapy in the past three years is briefly reviewed, and the current research status is summarized and prospected, with a view to contributing to future tumor therapy.

A New Strategy to Elevate Absorptivity of AIEgens for Intensified NIR-II Emission and Synergized Multimodality Therapy

High-efficiency absorptivity is crucial for the construction of high-performance luminescent materials, especially the long-wavelength near-infrared II (NIR-II) materials; thus seeking an efficient and universal strategy to elevate the absorptivity is extremely important but is still an intractable challenge. In this work, a simple but efficient design strategy is discovered, involving the introduction of gold(I) unit that could effectively elevate the absorptivity of aggregation-induced-emission luminogens (AIEgens). As a result of the efficient elevation of absorptivity, the representative AIE-active TBTP-Au shows more superior NIR-II (1220 nm) luminescence, much higher photothermal conversion efficiency, and unique intracellular reactive oxygen species (ROS) generating ability compared with that of the TBTP ligand. Taking advantage of these improvements, the fabricated tumor-targeting TBTP-Au-cRGD nanoparticles achieve specific NIR-II tumorous imaging in vivo and exert high-efficiency cancer therapy via the synergistic chemotherapy and photothermal therapy. Thus, this work provides a new and efficient strategy to construct high-absorption luminescent materials and demonstrates the great potential of gold(I)-based AIEgens as multifunctional theranostic agents.

More Is Better: Dual-Acceptor Engineering for Constructing Second Near-Infrared Aggregation-Induced Emission Luminogens to Boost Multimodal Phototheranostics

The manipulation of electron donor/acceptor (D/A) shows an endless impetus for innovating optical materials. Currently, there is booming development in electron donor design, while research on electron acceptor engineering has received limited attention. Inspired by the philosophical idea of "more is different", two systems with D'-D-A-D-D' (1A system) and D'-D-A-A-D-D' (2A system) structures based on acceptor engineering were designed and studied. It was demonstrated that the 1A system presented a weak aggregation-induced emission (AIE) to aggregation-caused quenching (ACQ) phenomenon, along with the increased acceptor electrophilicity and planarity. In sharp contrast, the 2A system with one more acceptor exhibited an opposite ACQ-to-AIE transformation. Interestingly, the fluorophore with a more electron-deficient A-A moiety in the 2A system displayed superior AIE activity. More importantly, all compounds in the 2A system showed significantly higher molar absorptivity (ε) in comparison to their counterparts in the 1A system. Thanks to the highest ε, near-infrared-II (NIR-II, 1000-1700 nm) emission, desirable AIE property, favorable reactive oxygen species (ROS) generation, and high photothermal conversion efficiency, a representative member of the 2A system handily performed in fluorescence-photoacoustic-photothermal multimodal imaging-guided photodynamic-photothermal collaborative therapy for efficient tumor elimination. Meanwhile, the NIR-II fluorescence imaging of blood vessels and lymph nodes in living mice was also accomplished. This study provides the first evidence that the dual-connected acceptor tactic could be a new molecular design direction for the AIE effect, resulting in high ε, aggregation-intensified NIR-II fluorescence emission, and improved ROS and heat generation capacities of phototheranostic agents.

Elevating Second Near-Infrared Photothermal Conversion Efficiency of Hollow Gold Nanorod for a Precise Theranostic of Orthotopic Bladder Cancer

The second near-infrared (NIR-II) window laser-activated agents have attracted broad interest in an orthotopic cancer theranostic. However, developing NIR-II photothermal agents (PTAs) with advanced photothermal conversion efficiency (PTCE) and tumor-specific response elevation remains a crucial challenge. Herein, a hollow gold nanorod (AuHNR) with a strong localized surface plasmon resonance (LSPR) peak in the NIR-II window was coated with MnO2 and chitosan to obtain AuHNR@MnO2@CS (termed AuMC) by a one-step method. Upon exposure to the tumor microenvironment (TME), the overexpressed GSH triggered degradation of the MnO2 layer to release Mn2+ and resulted in the PTCE elevation owing to exposure of the AuHNR. Consequently, photoacoustic and magnetic resonance imaging for accurate diagnosis, Mn2+-mediated chemodynamic therapy, and AuHNR elevating PT therapy for precise treatment could be achieved. Both in vitro and in vivo experiments confirmed the good performance of the AuMC on an orthotopic bladder cancer precise theranostic. This study provided NIR-II activated, TME-response PT conversion efficiency enhanced PTAs and offered a tumor-selective theranostic agent for orthotopic bladder cancer in clinical application.

A Supramolecular Naphthalene Diimide Radical Anion with Efficient NIR-II Photothermal Conversion for E. coli-Responsive Photothermal Therapy

We report a supramolecular naphthalene diimide (NDI) radical anion with efficient NIR-II photothermal conversion for E. coli-responsive photothermal therapy. The supramolecular radical anion (NDI-2CB[7])⋅- , which is obtained from the E. coli-induced in situ reduction of NDI-2CB[7] neutral complex, formed by the host-guest interaction between an NDI derivative and cucurbit[7]uril (CB[7]), exhibits unexpectedly strong NIR-II absorption and remarkable photothermal conversion capacity in aqueous solution. The NIR-II absorption is caused by the self-assembly of NDI radical anions to form supramolecular dimer radicals in aqueous solution, which is supported by theoretically predicted spectra. The (NDI-2CB[7])⋅- demonstrates excellent NIR-II photothermal antimicrobial activity (>99 %). This work provides a new approach for constructing NIR-II photothermal agents and non-contact treatments for bacterial infections.

Manipulating Multiple Resonance-Charge Transfer Hybrid Proportion for Developing Red Narrowband Thermally Activated Delayed Fluorescence Materials

Multiple resonance thermally activated delayed fluorescence (MR-TADF) materials have attracted increasing attention because of their 100% exciton utilization capability and narrowband emissions. However, it remains a formidable challenge to develop such red materials. Herein, we perform a theoretical investigation on the design of red narrowband TADF materials via manipulating the MR-charge transfer (CT) hybrid proportion by regulating the types of MR cores and peripheral electron-donating units. The results indicate that the MR-CT proportion in the excited states is closely relevant to the frontier molecular orbital (FMO)/hole-electron overlap, which is mainly determined by the dihedral angle between the MR cores and the peripheral units for the MR donor-acceptor molecules. The electron-donating ability of the peripheral substituents has little influence on the FMO/hole-electron overlap. Finally, c1-a and c2-a with red narrowband emissions were revealed. These findings with rich physical insights into the structure-property relationship should provide important clues for designing red narrowband optoelectronic materials.

Linker engineering toward near-infrared-I emissive metal-organic frameworks for amine detection

Herein, organic linker-based near-infrared-I (NIR-I) emissive metal-organic frameworks (MOFs), with a maximum emission peak at 741 nm, were synthesized via linker engineering. By integration of stronger acceptor and donor groups into one linker, a significant bathochromic-shift is realized. This MOF exhibits great selectivity and sensitivity for aniline and p-phenylenediamine detection. This finding provides new insights into the rational design of NIR-MOFs for sensing and related applications.

Carbonic anhydrase inhibitor-decorated semiconducting oligomer nanoparticles for active-targeting NIR-II fluorescence tumor imaging

Second near-infrared window (NIR-II) fluorescence imaging has shown great potential in the field of bioimaging. To achieve a better imaging effect, variety of NIR-II fluorescence probes have been designed and developed. Among them, semiconducting oligomers (SOs) have shown unique advantages including high photostability and quantum yield, making them promise in NIR-II fluorescence imaging. Herein, we design a SO nanoparticle (ASONi) for NIR-II fluorescence imaging of tumor. ASONi is composed of an azido-functionalized semiconducting oligomer as the NIR-II fluorescence emitter, and a benzene sulfonamide-ended DSPE-PEG (DSPE-PEG-CAi) as the stabilizer. Owing to the benzene sulfonamide groups on the surface, ASONi has the capability of targeting the carbonic anhydrase IX (CA IX) of MDA-MB-231 breast cancer cell. Compared with ASON without benzene sulfonamide groups on the surface, ASONi has a 1.4-fold higher uptake for MDA-MB-231 cells and 1.5-fold higher breast tumor accumulation after i.v. injection. The NIR-II fluorescence signal of ASONi can light the tumor up within 4 h, demonstrating its capability of active tumor targeting and NIR-II fluorescence imaging.

Selenium-integrated conjugated oligomer nanoparticles with high photothermal conversion efficiency for NIR-II imaging-guided cancer phototheranostics in vivo

Second near-infrared (NIR-II) fluorescence imaging in the range of 1000-1700 nm has great prospects for in vivo imaging and theranostics monitoring. At present, few NIR-II probes with theranostics properties have been developed, especially the high-performance organic theranostics material remains underexploited. Herein, we demonstrate a selenium (Se)-tailoring method to develop high-efficient NIR-II imaging-guided material for in vivo cancer phototheranostics. Via Se-tailoring strategy, conjugated oligomer TPSe-based nanoparticles (TPSe NPs) achieve bright NIR-II emission up to 1400 nm and exhibit a relatively high photothermal conversion efficiency of 60% with good stability. Moreover, the TPSe NPs demonstrate their photothermal ablation of cancer cells in vitro and tumor in vivo with the guidance of NIR-II imaging. It is worth noting that the TPSe NPs have good biocompatibility without obvious side effects. Thus, this work provides new insight into the development of NIR-II theranostics agents.

Precise Planar-Twisted Molecular Engineering to Construct Semiconducting Polymers with Balanced Absorption and Quantum Yield for Efficient Phototheranostics

Semiconducting polymers (SPs) have shown great feasibility as candidates for near-infrared-II (NIR-II) fluorescence imaging-navigated photothermal therapy due to their strong light-harvesting ability and flexible tunability. However, the fluorescence signal of traditional SPs tends to quench in their aggregate states owing to the strong π-π stacking, which can lead to the radiative decay pathway shutting down. To address this issue, aggregation-induced emission effect has been used as a rational tactic to boost the aggregate-state fluorescence of NIR-II emitters. In this contribution, we developed a precise molecular engineering tactic based on the block copolymerizations that integrate planar and twisted segments into one conjugated polymer backbone, providing great flexibility in tuning the photophysical properties and photothermal conversion capacity of SPs. Two monomers featured with twisted and planar architectures, respectively, were tactfully incorporated via a ternary copolymerization approach to produce a series of new SPs. The optimal copolymer (SP2) synchronously shows desirable absorption ability and good NIR-II quantum yield on the premise of maintaining typical aggregation-induced emission characteristics, resulting in balanced NIR-II fluorescence brightness and photothermal property. Water-dispersible nanoparticles fabricated from the optimal SP2 show efficient photothermal therapeutic effects both in vitro and in vivo. The in vivo investigation reveals the distinguished NIR-II fluorescence imaging performance of SP2 nanoparticles and their photothermal ablation toward tumor with prominent tumor accumulation ability and excellent biocompatibility.

NIR-II Fluorescence Imaging for the Detection and Resection of Cancerous Foci and Lymph Nodes in Early-Stage Orthotopic and Advanced-Stage Metastatic Ovarian Cancer Models

The high mortality rate of ovarian cancer can be primarily attributed to late diagnosis and early lymph node (LN) metastasis. The anatomically deep-located ovaries own intricate anatomical structures and lymphatic drainages that compromise the resolution and sensitivity of near-infrared first-window (NIR-I) fluorescence imaging. Reported NIR-II imaging studies of ovarian cancer focused on late-stage metastasis detection via the intraperitoneal xenograft model. However, given the significant improvement in patient survival associated with early-stage cancer detection, locating tumors that are restricted within the ovary is equally crucial. We obtained the polymer nanoparticles with bright near-infrared-II fluorescence (NIR-II NPs) by nanoprecipitation of DSPE-PEG, one of the ingredients of FDA-approved nanoparticle products, and benzobisthiadiazole, an organic NIR-II dye. The one-step synthesis and safe component lay the groundwork for its clinical translation. Benefiting from the NIR-II emission (∼1060 nm), NIR-II NPs enabled a high signal-to-noise (S/N) ratio (13.4) visualization of early-stage orthotopic ovarian tumors with NIR-II fluorescence imaging for the first time. Imaging with orthotopic xenograft allows a more accurate mimic of human ovarian cancer origin, thereby addressing the dilemma of translating existing nanoprobe preclinical research by providing the nano-bio interactions with early local tumor environments. After PEGylation, the desirable-sized probe (∼80 nm) exhibited high lymphophilicity and relatively extended circulation. NIR-II NPs maintained their accurate detection of orthotopic tumors, tumor-regional LNs, and minuscule (<1 mm) disseminated peritoneal metastases simultaneously (with S/N ratios all above 5) in mice with advanced-stage cancer in real time ∼36 h after systematic delivery. With NIR-II fluorescence guidance, we achieved accurate surgical staging in tumor-bearing mice and complete tumor removal comparable to clinical practice, which provides preclinical data for translating NIR-II fluorescence image-guided surgery.

A light-up fluorescence probe for wash-free analysis of Mu-opioid receptor and ligand-binding events

With the aggravated burden of opioid use disorder spreading worldwide, demands for new forms of opioid receptor agonist/antagonist constitute immense research interest. The Mu-opioid receptor (MOR) is currently in the spotlight on account of its general involvement in opioid-induced antinociception, tolerance and dependence. MOR binding assay, however, is often complicated by difficulty in MOR separation and purification, as well as the tedious procedure in standard biolayer interferometry and surface plasmon resonance measurements. To this end, we present TPE2N as a light-up fluorescent probe for MOR, which exhibits satisfactory performance in both live cells and lysates. TPE2N was elaborately designed based on the synergistic effect of twisted intramolecular charge-transfer and aggregation-induced emission by incorporating a tetraphenylethene unit to emit strong fluorescence in a restrained environment upon binding with MOR through the naloxone pharmacore. The developed assay enabled high-throughput screening of a compound library, and successfully identified three ligands as lead compounds for further development.

Near-Infrared Persistent Luminescence Nanoprobe for Ultrasensitive Image-Guided Tumor Resection

Near-infrared (NIR) fluorescence imaging poses significant superiority over traditional medical imaging for tumor resection, thus having attracted widely attention. However, for tiny tumor residues, it requires relative high sensitivity to determine. Here, based on persistent luminescence nanoparticles (PLNPs), an ultrasensitive nanoprobe with extraordinary tumor imaging result is developed to guide surgical removal. Persistent luminescence (PersL) is quenched in normal tissue by the outer layer of MnO2 , and is recovered due to the degradation of MnO2 in tumor microenvironment, significantly improving the sensitivity of tumor imaging. Combined with the absence of background fluorescence in imaging of PLNPs, ultrahigh sensitivity is achieved. In orthotopic breast cancer model, the intraoperative tumor-to-normal tissue (T/NT) signal ratio of the nanoprobe is 58.8, about 9 times that of downconversion nanoparticles. The T/NT ratio of residual tumor (<2 mm) remains 12.4, considerably high to distinguish tumor tissue from normal tissue. Besides, multiple-microtumor, 4T1 liver-implanted tumor and lung metastasis models are built to prove that this ultrasensitive nanoprobe is feasible to recognize tumor residues. Notably, PersL imaging takes only 1.5 min, appropriate to be applied for intraoperative imaging. Overall, an ultrasensitive and convenient imaging for recognizing residual tumor tissue is introduced, holding promise for complete surgical removal.

In Situ Imaging and Anti-inflammation of 3D Printed Scaffolds Enabled by AIEgen

Three-dimensional (3D) printed bioactive scaffolds have been widely used in the field of bone tissue engineering. However, its in vivo visualization and bacterial inflammation are intractable issues during the surgery and treatment. Herein, we first synthesized an aggregation-induced emission-active luminogen (AIEgen) named 4BC with efficient reactive oxygen species (ROS) generation. Then, a series of 3D bioactive scaffolds loaded with 4BC were fabricated by a precipitation adsorption method, namely 4BC@scaffolds, which showed good in situ imaging performance for the implanted scaffolds by using simple UV light irradiation. Among them, the 4BC@TMP scaffold composed of trimagnesium phosphate (TMP) had excellent bactericidal ability for Escherichia coli and Staphylococcus aureus in vitro and resisted bacterial inflammation in vivo through photodynamic action. H&E and immunofluorescence staining were performed to further evaluate the inhibitory effect of bacterial inflammation in vivo. This work verified that AIEgen-based 3D scaffolds are promising bioactive frameworks for bioimaging and antibacterial applications.

Synthesis and Characterization of Tetraphenylethene AIEgen-Based Push-Pull Chromophores for Photothermal Applications: Could the Cycloaddition-Retroelectrocyclization Click Reaction Make Any Molecule Photothermally Active?

Three new tetraphenylethene (TPE) push-pull chromophores exhibiting strong intramolecular charge transfer (ICT) are described. They were obtained via [2 + 2] cycloaddition-retroelectrocyclization (CA-RE) click reactions on an electron-rich alkyne-tetrafunctionalized TPE (TPE-alkyne) using both 1,1,2,2-tetracyanoethene (TCNE), 7,7,8,8-tetracyanoquinodimethane (TCNQ) and 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F₄-TCNQ) as electron-deficient alkenes. Only the starting TPE-alkyne displayed significant AIE behavior, whereas for TPE-TCNE, a faint effect was observed, and for TPE-TCNQ and TPE-F₄-TCNQ, no fluorescence was observed in any conditions. The main ICT bands that dominate the UV-Visible absorption spectra underwent a pronounced red-shift beyond the near-infrared (NIR) region for TPE-F₄-TCNQ. Based on TD-DFT calculations, it was shown that the ICT character shown by the compounds exclusively originated from the clicked moieties independently of the nature of the central molecular platform. Photothermal (PT) studies conducted on both TPE-TCNQ and TPE-F4-TCNQ in the solid state revealed excellent properties, especially for TPE-F4-TCNQ. These results indicated that CA-RE reaction of TCNQ or F₄-TCNQ with donor-substituted are promising candidates for PT applications.

Fast Delivery of Multifunctional NIR-II Theranostic Nanoaggregates Enabled by the Photoinduced Thermoacoustic Process

Multifunctional nanoaggregates are widely used in cancer phototheranostics. However, it is challenging to construct their multifunctionality with a single component, and deliver them rapidly and efficiently without complex modifications. Herein, a NIR-absorbing small molecule named TBT-2(TP-DPA) is designed and certify its theranostic potentials. Then, their nanoaggregates, which are simply encapsulated by DSPE-PEG, demonstrate a photothermal efficiency of 51% while keeping a high photoluminescence quantum yield in the NIR region. Moreover, the nanoaggregates can be excited and delivered by an 808 nm pulse laser to solid tumors within only 40 min. The delivery efficiency and theranostic efficacy are better than that of the traditional enhanced permeability and retention (EPR) effect (generally longer than 24 hours). This platform is first termed as the photoinduced thermoacoustic (PTA) process, and confirm its application requires both NIR-responsive materials and pulse laser irradiation. This study not only inspires the design of multifunctional nanoaggregates, but also offers a feasible approach to their fast delivery. The platform reported here provides a promising prospect to boost the development of multifunctional theranostic drugs and maximize the efficacy of used medicines for their clinical applications.

Tunable Nanoparticles with Aggregation-Induced Emission Heater for Precise Synergistic Photothermal and Thermodynamic Oral Cancer Therapy of Patient-Derived Tumor Xenograft

The fluorophores in the second near-infrared (NIR-II) biological window (1000 - 1700 nm) show great application prospects in the fields of biology and optical communications. However, both excellent radiative transition and nonradiative transition cannot be achieved simultaneously for the majority of traditional fluorophores. Herein, tunable nanoparticles formulated with aggregation-induced emission (AIE) heater are developed rationally. The system can be implemented via the development of an ideal synergistic system that can not only produce photothermal from nonspecific triggers but also trigger carbon radical release. Once accumulating in tumors and subsequently being irradiated with 808 nm laser, the nanoparticles (NMB@NPs) encapsulated with NMDPA-MT-BBTD (NMB) are splitted due to the photothermal effect of NMB, leading to the decomposition of azo bonds in the nanoparticle matrix to generate carbon radical. Accompanied by second near-infrared (NIR-II) window emission from the NMB, fluorescence image-guided thermodynamic therapy (TDT) and photothermal therapy (PTT) which significantly inhibited the growth of oral cancer and negligible systemic toxicity is achieved synergistically. Taken together, this AIE luminogens-based synergistic photothermal-thermodynamic strategy brings a new insight into the design of superior versatile fluorescent NPs for precise biomedical applications and holds great promise to enhance the therapeutic efficacy of cancer therapy.

Tracking tumor heterogeneity and progression with near-infrared II fluorophores

Heterogeneous cells are the main feature of tumors with unique genetic and phenotypic characteristics, which can stimulate differentially the progression, metastasis, and drug resistance. Importantly, heterogeneity is pervasive in human malignant tumors, and identification of the degree of tumor heterogeneity in individual tumors and progression is a critical task for tumor treatment. However, current medical tests cannot meet these needs; in particular, the need for noninvasive visualization of single-cell heterogeneity. Near-infrared II (NIR-II, 1000-1700 nm) imaging exhibits an exciting prospect for non-invasive monitoring due to the high temporal-spatial resolution. More importantly, NIR-II imaging displays more extended tissue penetration depths and reduced tissue backgrounds because of the significantly lower photon scattering and tissue autofluorescence than traditional the near-infrared I (NIR-I) imaging. In this review, we summarize systematically the advances made in NIR-II in tumor imaging, especially in the detection of tumor heterogeneity and progression as well as in tumor treatment. As a non-invasive visual inspection modality, NIR-II imaging shows promising prospects for understanding the differences in tumor heterogeneity and progression and is envisioned to have the potential to be used clinically.

A simple strategy for the efficient design of mitochondria-targeting NIR-II phototheranostics

The pursuit of phototheranostic agents with near-infrared II (NIR-II) emission, high photothermal conversion efficiency (PCE) and the robust generation of reactive oxygen species (ROS) in the aggregated state is always in high demand but remains a big challenge. Herein, we report a simple strategy to endow molecules with NIR-II imaging and photothermal therapy (PTT)/photodynamic therapy (PDT) abilities by equipping NIR-II aggregation-induced emission luminogens (AIEgens) with the cationic trimethylammonium unit, named as TDTN⁺. The resultant TDTN⁺ species can self-assemble into nanoparticles, which exhibit a maximum emission at ∼1052 nm, a high PCE (66.7%), type I and type II ROS generation and a mitochondria-targeting ability, simultaneously. The TDTN⁺ can realize brain imaging with bright fluorescence and an effective tumor killing effect. Overall, this work presents an innovative design strategy to develop multimodality phototheranostic agents.

Quinoid Conjugated Polymer Nanoparticles with NIR-II Absorption Peak Toward Efficient Photothermal Therapy

Recently, extensive efforts have been devoted to the development of the second near-infrared bio-window (NIR-II, 1000-1700 nm) theranostic agents owing to the excellent tissue-penetration capability of NIR-II light. The exploration of organic NIR-II photothermal therapy materials, especially those with absorption peak over 1000 nm, is an appealing yet significantly challenging task. Herein, we have designed conjugated polymer nanoparticles (PIS NPs) with NIR-II absorption peak at 1026 nm through a combined strategy of introducing quinoid donor-acceptor (D-A) structures, constructing intramolecular "conformational locks" and extending the conjugation area to narrow the band gap. Irradiated at 1064 nm, PIS NPs showed remarkable photothermal conversion performance for efficient photothermal ablation of tumor cells in vitro and in vivo. This study provides useful insights into the rational design of organic NIR-II photothermal agents based on multiple strategies.

Novel strategies and promising opportunities for targeted protein degradation: An innovative therapeutic approach to overcome cancer resistance

Targeted Protein Degradation is an emerging and rapidly developing technique for designing and treating new drugs. With the emergence of a promising class of pharmaceutical molecules, Heterobifunctional Proteolysis-targeting chimeras (PROTACs), TPD has become a powerful tool to completely tackle pathogenic proteins with traditional small molecule inhibitors. However, the conventional PROTACs have gradually exposed potential disadvantages of poor oral bioavailability and pharmacokinetic (PK) and absorption, distribution, metabolism, excretion, and toxicity (ADMET) characteristics due to their larger molecular weight and more complex structure than the conventional small-molecule inhibitors. Therefore, 20 years after the concept of PROTAC was proposed, more and more scientists are committed to developing new TPD technology to overcome its defects. And several new technologies and means have been explored based on "PROTAC" to target "undruggable proteins". Here, we aim to comprehensively summarize and profoundly analyze the research progress of targeted protein degradation based on PROTAC targeting the degradation of "undruggable" targets. In order to clarify the significance of emerging and highly effective strategies based PROTACs in the treatment of various diseases especially in overcoming drug resistance in cancer, we will focus on the molecular structure, action mechanism, design concepts, development advantages and challenges of these emerging methods(e.g., aptamer-PROTAC conjugates, antibody-PROTACs and folate-PROTACs).

In Vivo Fluorescence Imaging-Guided Development of Near-Infrared AIEgens

In vivo fluorescence imaging has received extensive attention due to its distinguished advantages of excellent biosafety, high sensitivity, dual temporal-spatial resolution, real-time monitoring ability, and non-invasiveness. Aggregation-induced emission luminogens (AIEgens) with near-infrared (NIR) absorption and emission wavelengths are ideal candidate for in vivo fluorescence imaging for their large Stokes shift, high brightness and superior photostability. NIR emissive AIEgens provide deep tissue penetration depth as well as low interference from tissue autofluorescence. Here in this review, we summarize the molecular engineering strategies for constructing NIR AIEgens with high performances, including extending π-conjugation system and strengthen donor (D)-acceptor (A) interactions. Then the encapsulation strategies for increasing water solubility and biocompatibility of these NIR AIEgens are highlighted. Finally, the challenges and prospect of fabricating NIR AIEgens for in vivo fluorescence imaging are also discussed. We hope this review would provide some guidelines for further exploration of new NIR AIEgens.

Manipulating Host-Guest Charge Transfer of a Water-Soluble Double-Cavity Cyclophane for NIR-II Photothermal Therapy

Water-soluble small organic photothermal agents (PTAs) over NIR-II biowindow (1000-1350 nm) are highly desirable, but the rarity greatly limits their applications. Based on a water-soluble double-cavity cyclophane GBox-4⁴⁺ , we report a class of host-guest charge transfer (CT) complexes as structurally uniform PTAs for NIR-II photothermal therapy. As a result of its high electron-deficiency, GBox-4⁴⁺ can bind different electron-rich planar guests with a 1 : 2 host/guest stoichiometry to readily tune the CT absorption band that extends to the NIR-II region. When using a diaminofluorene guest substituted with an oligoethylene glycol chain, the host-guest system realized both good biocompatibility and enhanced photothermal conversion at 1064 nm, and was then exploited as a high-efficiency NIR-II PTA for cancer cell and bacterial ablation. This work broadens the potential applications of host-guest cyclophane systems and provides a new access to bio-friendly NIR-II photoabsorbers with well-defined structures.

Increasing Molecular Planarity through Donor/Side-Chain Engineering for Improved NIR-IIa Fluorescence Imaging and NIR-II Photothermal Therapy under 1064 nm

Developing conjugated small molecules (CSM) with intense NIR-II (1000-1700 nm) absorption for phototheranostic is highly desirable but remains a tremendous challenge due to a lack of reliable design guidelines. This study reports a high-performance NIR-II CSM for phototheranostic by tailoring molecular planarity. A series of CSM show bathochromic absorption extended to the NIR-II region upon the increasing thiophene number, but an excessive number of thiophene results in decreased NIR-IIa (1300-1400 nm) brightness and photothermal effects. Further introduction of terminal nonconjugated alkyl chain can enhance NIR-II absorption coefficient, NIR-IIa brightness, and photothermal effects. Mechanism studies ascribe this overall enhancement to molecular planarity stemming from the collective contribution of donor/side-chain engineering. This finding directs the design of NIR-II CSM by rational manipulating molecular planarity to perform 1064 nm mediated phototheranostic at high efficiency.

Genetically edited T-cell membrane coated AIEgen nanoparticles effectively prevents glioblastoma recurrence

Glioblastoma stem cells (GSCs) are subpopulations of tumor-initiating cells responsible for glioblastoma (GBM) tumorigenesis and recurrence. Dual inhibition of vascular endothelium and GSCs is still a challenge due to their different pathological features. Here we present a combined all-in-control strategy to realize a local photothermal therapy (PTT). We designed T-cell-mimic nanoparticles with aggregation-induced emission (AIE) characteristics by coating the genetically engineered T cell membrane (CM) onto AIE nanoparticles (CM@AIE NPs). The CM shell was designed against CD133 and epidermal growth factor receptor (EGFR) which provides the possibility to target both GBM cells and GSCs for cancer therapy. CM@AIE NPs can serve as the tight junction (TJ) modulators to trigger an intracellular signaling cascade, causing TJ disruption and actin cytoskeleton reorganization to allow CM@AIE NPs to cross the blood-brain barrier (BBB) silently. The 980 nm excitation-triggered PTT can completely inhibit tumorigenesis and recurrence. The combination of CM-coating nanotechnology and genetic editing technique can inspire further development of synergetic techniques for preventing GBM recurrence.