Electrophoretic origin of long-range repulsion of colloids near water/Nafion interfaces

Exclusion-zone water inside and outside of plant xylem vessels

The fourth phase of water has garnered increased attention within the scientific community due to its distinct properties that differentiate it from regular water. This unique state seems to arise potentially from a liquid crystalline structure, which has been observed near various hydrophilic surfaces to possess the capability of excluding microspheres. Consequently, it has been labeled as exclusion zone (EZ) water. When in contact with hydrophilic surfaces, water could exhibit the ability to form organized layers of EZ water. In this study, we investigated the quick buildup of EZ water exposed to xylem vessels of four vegetable plants: cabbage, celery, asparagus, and pumpkin. Among them, pumpkin vessels showed larger EZs, up to 240 ± 56 μm in width. The width of EZ water found near the xylem vessels of the other plants ranged from 133 ± 22 to 142 ± 20 μm. EZ water generally excludes a wide range of particles, including polystyrene microspheres with various surface modifications, as well as silica microspheres. This implies that the formation of EZ water is not an artificial result of using specific microsphere types but rather demonstrates EZ's ability to exclude particles regardless of their composition. Inside single xylem vessels of the pumpkin, we could observe the dynamics of EZ buildup, growing from the inside edge of the vessel toward the center. The relationship between vessel diameter, vessel length, and salt concentration on EZ generation inside the xylem vessel was also explored. The results showed that EZ water can build up both inside and outside the xylem vessels. Our findings suggest that EZ generation inside xylem vessels is associated with water flow, likely driven by a proton gradient. Further research is warranted to elucidate the role of EZ water in the physiology of living plants, particularly considering the limitations of the current experiments conducted on cut-out xylem vessel samples.

Dependence of cell's membrane potential on extracellular voltage observed in Chara globularis

The membrane potential (Vm) of a cell results from the selective movement of ions across the cell membrane. Recent studies have revealed the presence of a gradient of voltage within a few nanometers adjacent to erythrocytes. Very notably this voltage is modified in response to changes in cell's membrane potential thus effectively extending the potential beyond the membrane and into the solution. In this study, using the microelectrode technique, we provide experimental evidence for the existence of a gradient of negative extracellular voltage (Vz) in a wide zone close to the cell wall of algal cells, extending over several micrometers. Modulating the ionic concentration of the extracellular solution with CO2 alters the extracellular voltage and causes an immediate change in Vm. Elevated extracellular CO2 levels depolarize the cell and hyperpolarize the zone of extracellular voltage (ZEV) by the same magnitude. This observation strongly suggests a coupling effect between Vz and Vm. An increase in the level of intracellular CO2 (dark respiration) leads to hyperpolarization of the cell without any immediate effect on the extracellular voltage. Therefore, the metabolic activity of a cell can proceed without inducing changes in Vz. Conversely, Vz can be modified by external stimulation without metabolic input from the cell. The evolution of the ZEV, particularly around spines and wounded cells, where ion exchange is enhanced, suggests that the formation of the ZEV may be attributed to the exchange of ions across the cell wall and cell membrane. By comparing the changes in Vm in response to external stimuli, as measured by electrodes and observed using a potential-sensitive dye, we provide experimental evidence demonstrating the significance of extracellular voltage in determining the cell's membrane potential. This may have implications for our understanding of cell membrane potential generation beyond the activities of ion channels.

Sulfobetaine-Siloxanes: A Class of Self-Destructive Surfactants

The hydrolytic susceptibility of sulfobetaine-siloxane surfactants is investigated by comparison of a homologous series in this subclass of surfactants (R-(CH2)3N+(Me)2(CH2)3SO3-; R = (Me3SiO)3Si-, (Me3SiO)2Si(Me)-, (Me2SiO)3-Si(Me)-) with an analogue series of oxyethylene-siloxane surfactants (R-(CH2)3(OCH2CH2)10.2OH; R = (Me3SiO)3Si-, (Me3SiO)2Si(Me)-, (Me2SiO)3-Si(Me)-). Nuclear magnetic resonance (NMR) monitoring of these surfactants in an aqueous solution shows that the presence of the sulfobetaine head structure greatly enhances the hydrolysis rate of the siloxane tail as compared with oxyethylene-siloxane analogue control experiments. This sulfobetaine effect is confirmed by adding a model compound, (Me)3N+(CH2)3SO3-, to the oxyethylene-siloxane surfactants and observing the large hydrolysis enhancement. Measurements of pH indicate the sulfobetaine presence greatly enhances acidity, but rigorous analysis could discover no source of acid other than the presence of the sulfobetaine structure. Titration measurements confirmed the presence of a tightly bound hydration layer of 4-7 water molecules per sulfobetaine group. It is speculated that the source of acidity may originate from an aqueous exclusion zone nucleated by the hydrated sulfobetaine at the interface of a sulfobetaine-siloxane surfactant bilayer aggregate. Hydrolysis prevention is investigated by addition of a pH 7 phosphate buffer, of an alkyl polyglycoside cosurfactant, and of a combination of both, with a finding of very significant but not complete suppression of the hydrolysis.

Collective motion of Nafion-based micromotors in water

Ion exchange is one of the most interesting processes occurring at the interface between aqueous solutions and polymers, such as the well-known Nafion. If the exchanged ions have different diffusion coefficients, this interchange generates local electric fields which can be harnessed to drive fluid motion. In this work, we show how it is possible to design and fabricate self-propelling microswimmers based on Nafion, driven by ion-exchange, and fueled by innocuous salts. These Nafion micromotors are made using colloidal lithography by micro/nanostructuring Nafion in the form of asymmetric rods. These microswimmers exhibit fascinating collective motion in water driven by the interplay of their self-generated chemical/electric fields and their capability to pump matter nearby towards the collective motile structure. The pumping activity of the microswimmers induces the formation of growing mobile clusters, whose velocity increases with size. Such dynamic structures are able to trap nearby micro/nano-objects while purifying the liquid, which acts both as the transport media and as fuel. Such phenomenology opens the door to potential applications in water remediation that are currently under development.

Voltage and concentration gradients across membraneless interface generated next to hydrogels: relation to glycocalyx

Next to many hydrophilic surfaces, including those of biological cells and tissues, a layer of water that effectively excludes solutes and particles can be generated. This interfacial water is the subject of research aiming for practical applications such as removal of salts, pathogens or manipulation of biomolecules. However, the exact mechanism of its creation is still elusive because its persistence and extension contradict hydrogen-bond dynamics and electric double layer predictions. The experimentally recorded negative voltage of this interfacial water remains to be properly explained. Even less is known about the nature of such water layers in biological systems. We present experimental evidence for ion and particle exclusion as a result of separation of ionic charges with distinct diffusion rates across a liquid junction at the gel/water interface and the subsequent repulsion of ions of a given sign by a like-charged gel surface. Gels represent features of biological interfaces (in terms of functional groups and porosity) and are subject to biologically relevant chemical triggers. Our results show that gels with -OSO3- and -COO- groups can effectively generate ion- and particle-depleted regions of water reaching over 100 μm and having negative voltage up to -30 mV. Exclusion distance and electric potential depend on the liquid junction potential at the gel/water interface and on the concentration gradient at the depleted region/bulk interface, respectively. The voltage and extension of these ion- and particle-depleted water layers can be effectively modified by CO2 (respiratory gas) or KH2PO4 (cell metabolite). Possible implications pertain to biologically unstirred water layers and a cell's bioenergetics.

Self-generated exclusion zone in a dead-end pore microfluidic channel

Particles can be manipulated by gradients of concentration (diffusiophoresis) and electric potential (electrophoresis) to transport them to desired locations. To establish these gradients, external stimuli are usually required. In this work, we manipulate particles through a self-generated concentration gradient within a PDMS-based microfluidic platform, without directly applying an external field. The interfacial chemistry of the PDMS results in a local increase of hydronium ions, leading to a concentration and electrical potential gradient in the system, which in turn generate a temporary exclusion zone at the pore entrance, extending up to half of the main channel, or 150 μm. With time, this exclusion zone diminishes as equilibrium in the ion concentration is reached. We study the dynamics of the exclusion zone thickness and find that the Sherwood number determines the size and stability of the exclusion zone. Our work shows, that even without introducing external ionic gradients, particle diffusiophoresis is significant in lab-on-a-chip systems. The interfacial chemistry of the microfluidic platform can have a significant influence on particle movement and this should be considered when designing experiments on diffusiophoresis. The observed phenomenon can be employed to design lab-on-a-chip-based sorting of colloidal particles.

A phenomenological model for interfacial water near hydrophilic polymers

We propose a minimalist phenomenological model for the 'interfacial water' phenomenon that occurs near hydrophilic polymeric surfaces. We achieve this by combining a Ginzburg-Landau approach with Maxwell's equations which leads us to a well-posed model providing a macroscopic interpretation of experimental observations. From the derived governing equations, we estimate the unknown parameters using experimental measurements from the literature. The resulting profiles of the polarization and electric potential show exponential decay near the surface, in qualitative agreement with experiments. Furthermore, the model's quantitative prediction of the electric potential at the hydrophilic surface is in excellent agreement with experiments. The proposed model is a first step towards a more complete parsimonious macroscopic model that will, for example, help to elucidate the effects of interfacial water on cells (e.g. neuronal excitability), the effects of infrared neural stimulation or the effects of drugs mediated by interfacial water.

From radial to unidirectional water pumping in zeta-potential modulated Nafion nanostructures

Chemically propelled micropumps are promising wireless systems to autonomously drive fluid flows for many applications. However, many of these systems are activated by nocuous chemical fuels, cannot operate at high salt concentrations, or have difficulty for controlling flow directionality. In this work we report on a self-driven polymer micropump fueled by salt which can trigger both radial and unidirectional fluid flows. The micropump is based on the cation-exchanger Nafion, which produces chemical gradients and local electric fields capable to trigger interfacial electroosmotic flows. Unidirectional pumping is predicted by simulations and achieved experimentally by nanostructuring Nafion into microarrays with a fine tune modulation of surrounding surface zeta potentials. Nafion micropumps work in a wide range of salt concentrations, are reusable, and can be fueled by different salt cations. We demonstrate that they work with the common water-contaminant cadmium, using the own capture of this ion as fuel to drive fluid pumping. Thus, this system has potential for efficient and fast water purification strategies for environmental remediation. Unidirectional Nafion pumps also hold promise for effective analyte delivery or preconcentration for (bio)sensing assays.

Chemically propelled micropumps are wireless fluid flow driving systems with many potential applications. Here, the authors report a self-driven reusable Nafion micropump fueled by different salt cations in a wide range of concentrations that triggers both radial and unidirectional flows, showing efficient water remediation capabilities.

Computational Investigation of the Ordered Water System Around Microtubules: Implications for Protein Interactions

The existence of an exclusion zone in which particles of a colloidal suspension in water are repelled from hydrophilic surfaces has been experimentally demonstrated in numerous studies, especially in the case of Nafion surfaces. Various explanations have been proposed for the origin of this phenomenon, which is not completely understood yet. In particular, the existence of a fourth phase of water has been proposed by G. Pollack and if this theory is proven correct, its implications on our understanding of the properties of water, especially in biological systems, would be profound and could give rise to new medical therapies. Here, a simple approach based on the linearized Poisson-Boltzmann equation is developed in order to study the repulsive forces mediated by ordered water and involving the following interacting biomolecules: 1) microtubule and a tubulin dimer, 2) two tubulin dimers and 3) a tubulin sheet and a tubulin dimer. The choice of microtubules in this study is motivated because they could be a good candidate for the generation of an exclusion zone in the cell and these models could be a starting point for detailed experimental investigations of this phenomenon.

Electrokinetic sweeping of colloids at a reactive magnesium oxide interface

Investigating the electrokinetic (EK) response in the vicinity of interfaces has regained interest due to the development of new membrane based processes for energy harvesting or soil depollution. However, the case of reactive interfaces, ubiquitous in these processes, remains scarcely explored. Here we experimentally investigate the EK response of a model interface between an aqueous electrolyte and a bulk MgO crystal surface (100), for different pH. For that purpose, we use a lab-scale non invasive method to monitor the zeta potential of the interface versus time, by confocal fluorescent particle tracking. An unexpected motion of the particles, repelled and then attracted again by the interface is observed. We attributed this motion to the surface reactivity, inducing ion concentration gradients perpendicular to the interface and subsequent diffusiophoresis of the charged particle. Accordingly, we could describe at a semi-quantitative level the particle dynamics by solving numerically the Poisson-Nernst-Planck equations to establish concentration profile in the system and subsequent diffusiophoretic motion. These experiments open the way to the characterization of both the EK response and the reaction rate in the vicinity of reactive interfaces.

On the evolution of the exclusion zone produced by hydrophilic surfaces: A contracted description

After exciting scientific debates about its nature, the development of the exclusion zone, a region near hydrophilic surfaces from which charged colloidal particles are strongly expelled, has been finally traced back to the diffusiophoresis produced by unbalanced ion gradients. This was done by numerically solving the coupled Poisson equation for electrostatics, the two stationary Stokes equations for low Reynolds numbers in incompressible fluids, and the Nernst-Planck equation for mass transport. Recently, it has also been claimed that the leading mechanism behind the diffusiophoretic phenomenon is electrophoresis [Esplandiu et al., Soft Matter 16, 3717 (2020)]. In this paper, we analyze the evolution of the exclusion zone based on a one-component interaction model at the Langevin equation level, which leads to simple analytical expressions instead of the complex numerical scheme of previous works, yet being consistent with it. We manage to reproduce the evolution of the exclusion zone width and the mean-square displacements of colloidal particles we measure near Nafion, a perfluorinated polymer membrane material, along with all characteristic time regimes, in a unified way. Our findings are also strongly supported by complementary experiments using two parallel planar conductors kept at a fixed voltage, mimicking the hydrophilic surfaces, and some computer simulations.

Shaping the gradients driving phoretic micro-swimmers: influence of swimming speed, budget of carbonic acid and environment

pH gradient-driven modular micro-swimmers are investigated as a model for a large variety of quasi-two-dimensional chemi-phoretic self-propelled entities. Using three-channel micro-photometry, we obtain a precise large field mapping of pH at a spatial resolution of a few microns and a pH resolution of [Formula: see text] units for swimmers of different velocities propelling on two differently charged substrates. We model our results in terms of solutions of the three-dimensional advection-diffusion equation for a 1:1 electrolyte, i.e. carbonic acid, which is produced by ion exchange and consumed by equilibration with dissolved [Formula: see text]. We demonstrate the dependence of gradient shape and steepness on swimmer speed, diffusivity of chemicals, as well as the fuel budget. Moreover, we experimentally observe a subtle, but significant feedback of the swimmer's immediate environment in terms of a substrate charge-mediated solvent convection. We discuss our findings in view of different recent results from other micro-fluidic or active matter investigations. We anticipate that they are relevant for quantitative modelling and targeted applications of diffusio-phoretic flows in general and artificial micro-swimmers in particular.

Formation of Water-Free Cavity in the Process of Nafion Swelling in a Cell of Limited Volume; Effect of Polymer Fibers Unwinding

When Nafion swells in water, colloidal particles are repelled from the polymer surface; this effect is called the formation exclusion zone (EZ), and the EZ size amounts to several hundred microns. However, still no one has investigated the EZ formation in a cell whose dimension is close to the EZ size. It was also shown that, upon swelling in water, Nafion fibers “unwind” into the water bulk. In the case of a cell of limited volume, unwound fibers abut against the cell windows, and water is completely pushed out from the region between the polymer and the cell window, resulting in a cavity appearance. The temporal dynamics of the collapse of this cavity was studied depending on the cell size. It is shown that the cavity formation occurs due to long-range forces between polymer strands. It turned out that this scenario depends on the isotopic composition of the water, ionic additives and water pretreatment. The role of nanobubbles in the formation and collapse of the cavity were analyzed. The results obtained allowed us to conclude that the EZ formation is precisely due to the unwinding of polymer fibers into the liquid bulk.

Propolis-induced exclusion of colloids: Possible new mechanism of biological action

Propolis is a natural product originating from life activity of honeybees. It exhibits wide range of biological properties applicable in medicine, the food industry, and cosmetics. Chemically, propolis is a complex and variable mixture with more than 300 identified biologically active components. Propolis's many health-promoting effects are attributed to different biochemical mechanisms, mediated by often-concerted actions of some of its many constituents. Propolis is considered safe and biocompatible. Yet due to its intrinsic complexity, standardization of propolis preparations for medical use as well as prediction of e.g. pathogen-specific interactions becomes a non-trivial task. In this work we demonstrate a new physical mechanism of propolis action, largely independent of specific nuances of propolis chemistry, which may underlie some of its biological actions. We show that propolis-bearing surfaces generate an extensive exclusion zone (EZ) water layer. EZ is an interfacial region of water capable of excluding solutes ranging from ions to microorganisms. Propolis-generated EZ may constitute an effective barrier, physically disabling the approach of various pathogens to the propolis-functionalized surfaces. We suggest possible implications of this new mechanism for propolis-based prevention of respiratory infections.

Exclusion Zone Phenomena in Water-A Critical Review of Experimental Findings and Theories

The existence of the exclusion zone (EZ), a layer of water in which plastic microspheres are repelled from hydrophilic surfaces, has now been independently demonstrated by several groups. A better understanding of the mechanisms which generate EZs would help with understanding the possible importance of EZs in biology and in engineering applications such as filtration and microfluidics. Here we review the experimental evidence for EZ phenomena in water and the major theories that have been proposed. We review experimental results from birefringence, neutron radiography, nuclear magnetic resonance, and other studies. Pollack theorizes that water in the EZ exists has a different structure than bulk water, and that this accounts for the EZ. We present several alternative explanations for EZs and argue that Schurr's theory based on diffusiophoresis presents a compelling alternative explanation for the core EZ phenomenon. Among other things, Schurr's theory makes predictions about the growth of the EZ with time which have been confirmed by Florea et al. and others. We also touch on several possible confounding factors that make experimentation on EZs difficult, such as charged surface groups, dissolved solutes, and adsorbed nanobubbles.