Stabilizing liquid drops in nonequilibrium shapes by the interfacial crosslinking of nanoparticles

Stabilizing Liquids Using Interfacial Supramolecular Assemblies

Stabilizing liquids based on supramolecular assembly (non-covalent intermolecular interactions) has attracted significant interest, due to the increasing demand for soft, liquid-based devices where the shape of the liquid is far from the equilibrium spherical shape. The components comprising these interfacial assemblies must have sufficient binding energies to the interface to prevent their ejection from the interface when the assemblies are compressed. Here, we highlight recent advances in structuring liquids based on non-covalent intermolecular interactions. We describe some of the progress made that reveals structure-property relationships. In addition to treating advances, we discuss some of the limitations and provide a perspective on future directions to inspire further studies on structured liquids based on supramolecular assembly.

Stabilizing Liquid in Precise Nonequilibrium Shapes via Fast Interfacial Polymerization

Due to the minimization of interface area caused by surface tension, the stabilization of liquid in complex and precise nonequilibrium shapes is challenging. In this work, a simple, surfactant-free, and covalent strategy to stabilize liquid in precise nonequilibrium shapes via fast interfacial polymerization (FIP) of highly reactive n-butyl cyanoacrylate (BCA) monomer triggered by water-soluble nucleophiles is described. Full interfacial coverage can be achieved instantly, and the resultant polyBCA film anchored at the interface can support the unequal interface stress, which allows the production of non-spherical droplets with complex shapes. Notably, the formulation of internal aqueous phase is nearly unaffected since no specific additive is required. Moreover, considering the excellent biocompatibility of BCA and polyBCA, the produced droplets can be used as micro-bioreactor for enzyme catalysis and even bacterial culture, which well mimic the morphology of cells and bacteria to achieve the biochemical reaction in non-spherical droplets. The present work not only opens a new sight for the stabilization of liquid in nonequilibrium shapes, but may also promote the development of synthetic biology based on non-spherical droplets, and tremendous potential applications are anticipated.

Is there a difference between surfactant-stabilised and Pickering emulsions?

What measurable physical properties allow one to distinguish surfactant-stabilised from Pickering emulsions? Whereas surfactants influence oil/water interfaces by lowering the oil/water interfacial tension, particles are assumed to have little effect on the interfacial tension. Here we perform interfacial tension (IFT) measurements on three different systems: (1) soybean oil and water with ethyl cellulose nanoparticles (ECNPs), (2) silicone oil and water with the globular protein bovine serum albumin (BSA), and (3) sodium dodecyl sulfate (SDS) solutions and air. The first two systems contain particles, while the third system contains surfactant molecules. We observe a significant decrease in interfacial tension with increasing particle/molecule concentration in all three systems. We analyse the surface tension data using the Gibbs adsorption isotherm and the Langmuir equation of state for the surface, resulting in surprisingly high adsorption densities for the particle-based systems. These seem to behave very much like the surfactant system: the decrease in tension is due to the presence of many particles at the interface, each with an adsorption energy of a few k_BT. Dynamic interfacial tension measurements show that the systems are in equilibrium, and that the characteristic time scale for adsorption is much longer for particle-based systems than for surfactants, in line with their size difference. In addition, the particle-based emulsion is shown to be less stable against coalescence than the surfactant-stabilised emulsion. This leaves us with the conclusion that we are not able to make a clear distinction between the surfactant-stabilised and Pickering emulsions.

Synthesis and Polyelectrolyte Functionalization of Hollow Fiber Membranes Formed by Solvent Transfer Induced Phase Separation

Ultrafiltration membranes are important porous materials to produce freshwater in an increasingly water-scarce world. A recent approach to generate porous membranes is solvent transfer induced phase separation (STrIPS). During STrIPS, the interplay of liquid-liquid phase separation and nanoparticle self-assembly results in hollow fibers with small surface pores, ideal structures for applications as filtration membranes. However, the underlying mechanisms of the membrane formation are still poorly understood, limiting the control over structure and properties. To address this knowledge gap, we study the nonequilibrium dynamics of hollow fiber structure evolution. Confocal microscopy reveals the distribution of nanoparticles and monomers during STrIPS. Diffusion simulations are combined with measurements of the interfacial elasticity to investigate the effect of the solvent concentration on nanoparticle stabilization. Furthermore, we demonstrate the separation performance of the membrane during ultrafiltration. To this end, polyelectrolyte multilayers are deposited on the membrane, leading to tunable pores that enable the removal of dextran molecules of different molecular weights (>360 kDa, >60 kDa, >18 kDa) from a feed water stream. The resulting understanding of STrIPS and the simplicity of the synthesis process open avenues to design novel membranes for advanced separation applications.

Visualizing Assembly Dynamics of All-Liquid 3D Architectures

To better exploit all-liquid 3D architectures, it is essential to understand dynamic processes that occur during printing one liquid in a second immiscible liquid. Here, the interfacial assembly and transition of 5,10,15,20-tetrakis(4-sulfonatophenyl) porphyrin (H₆ TPPS) over time provides an opportunity to monitor the interfacial behavior of nanoparticle surfactants (NPSs) during all-liquid printing. The formation of J-aggregates of H₄ TPPS^2- at the interface and the interfacial conversion of the J-aggregates of H₄ TPPS^2- to H-aggregates of H₂ TPPS^4- is demonstrated by interfacial rheology and in situ atomic force microscopy. Equally important are the chromogenic changes that are characteristic of the state of aggregation, where J-aggregates are green in color and H-aggregates are red in color. In all-liquid 3D printed structures, the conversion in the aggregate state with time is reflected in a spatially varying change in the color, providing a simple, direct means of assessing the aggregation state of the molecules and the mechanical properties of the assemblies, linking a macroscopic observable (color) to mechanical properties.

Modulation of liquid structure and controlling molecular diffusion using supramolecular constructs

The non-equilibrium liquid structure was achieved by interfacial jamming of pillar[5]arene carboxylic acid (P[5]AA) mediated by hydrogen bonding interactions. The assembly was reversibly modulated via jamming to unjamming transition thus dynamically shaping the liquid droplets. Interestingly, these supramolecular constructs showed pH-switchable gated diffusion of encapsulants, hence showcasing a next generation smart release system.