Recent advances in MoS2-based photothermal therapy for cancer and infectious disease treatment

Chitosan-2D Nanomaterial-Based Scaffolds for Biomedical Applications

Chitosan (CS) and two-dimensional nanomaterial (2D nanomaterials)-based scaffolds have received widespread attention in recent times in biomedical applications due to their excellent synergistic potential. CS has garnered much attention as a biomedical scaffold material either alone or in combination with some other material due to its favorable physiochemical properties. The emerging 2D nanomaterials, such as black phosphorus (BP), molybdenum disulfide (MoS2), etc., have taken huge steps towards varying biomedical applications. However, the implementation of a CS-2D nanomaterial-based scaffold for clinical applications remains challenging for different reasons such as toxicity, stability, etc. Here, we reviewed different types of CS scaffold materials and discussed their advantages in biomedical applications. In addition, a different CS nanostructure, instead of a scaffold, has been described. After that, the importance of 2D nanomaterials has been elaborated on in terms of physiochemical properties. In the next section, the biomedical applications of CS with different 2D nanomaterial scaffolds have been highlighted. Finally, we highlighted the existing challenges and future perspectives of using CS-2D nanomaterial scaffolds for biomedical applications. We hope that this review will encourage a more synergistic biomedical application of the CS-2D nanomaterial scaffolds and their utilization clinical applications.

Nanogold-coated stent facilitated non-invasive photothermal ablation of stent thrombosis and restoration of blood flow

In-stent restenosis (ISR) and stent thrombosis (ST) are the most serious complications of coronary angioplasty and stenting. Although the evolution of drug-eluting stents (DES) has significantly restricted the incidence of ISR, they are associated with an enhanced risk of ST. In the present study, we explore the photothermal ablation of a thrombus using a nano-enhanced thermogenic stent (NETS) as a modality for revascularization following ST. The photothermal activity of NETS, fabricated by coating bare metal stents with gold nanorods generating a thin plasmonic film of gold, was found to be effective in rarefying clots formed within the stent lumen in various in vitro assays including those under conditions mimicking blood flow. NETS implanted in the rat common carotid artery generated heat following exposure to a NIR-laser that led to effective restoration of blood flow within the occluded vessel in a model of ferric chloride-induced thrombosis. Our results present a proof-of-concept for a novel photothermal ablation approach by employing coated stents in the non-invasive management of ST.

Synergistic effect of photothermal and magnetic hyperthermia for in situ activation of Fenton reaction in tumor microenvironment for chemodynamic therapy

Traditional cancer treatments are ineffective and cause severe adverse effects. Thus, the development of chemodynamic therapy (CDT) has the potential for in situ catalysis of endogenous molecules into highly toxic species, which would then effectively destroy cancer cells. However, the shortage of high-performance nanomaterials hinders the broad clinical application of this approach. In present study, an effective therapeutic platform was developed using a simple hydrothermal method for the in-situ activation of the Fenton reaction within the tumor microenvironment (TME) to generate substantial quantities of •OH and ultimately destroy cancer cells, which could be further synergistically increased by photothermal therapy (PHT) and magnetic hyperthermia (MHT) aided by FeMoO4 nanorods (NRs). The produced FeMoO4 NRs were used as MHT/PHT and Fenton catalysts. The photothermal conversion efficiency of the FeMoO4 NRs was 31.75 %. In vitro and \ experiments demonstrated that the synergistic combination of MHT/PHT/CDT notably improved anticancer efficacy. This work reveals the significant efficacy of CDT aided by both photothermal and magnetic hyperthermia and offers a feasible strategy for the use of iron-based nanoparticles in the field of biomedical applications.

Targeted co-delivery of curcumin and erlotinib by MoS2 nanosheets for the combination of synergetic chemotherapy and photothermal therapy of lung cancer

BACKGROUND

Curcumin (Cur), a bioactive component of Chinese traditional medicine, has demonstrated inhibitory properties against cancer cell proliferation while synergistically enhancing the anticancer efficacy of erlotinib (Er). However, the individual limitations of both drugs, including poor aqueous solubility, lack of targeting ability, short half-life, etc., and their distinct pharmacokinetic profiles mitigate or eliminate their combined antitumor potential.

RESULTS

In this study, we developed a molybdenum disulfide (MoS2)-based delivery system, functionalized with polyethylene glycol (PEG) and biotin, and co-loaded with Cur and Er, to achieve efficient cancer therapy. The MoS2-PEG-Biotin-Cur/Er system effectively converted near-infrared (NIR) light into heat, thereby inducing direct photothermal ablation of cancer cells and promoting controlled release of Cur and Er. Biotin-mediated tumor targeting facilitated the selective accumulation of MoS2-PEG-Biotin-Cur/Er at the tumor site, thus enhancing the synergistic antitumor effects of Cur and Er. Remarkably, MoS2-PEG-Biotin-Cur/Er achieved the combination of synergistic chemotherapy and photothermal therapy (PTT) upon NIR irradiation, effectively suppressing lung cancer cell proliferation and inhabiting tumor growth in vivo.

CONCLUSIONS

The as-synthesized MoS2-PEG-Biotin-Cur/Er, featuring high targeting ability, NIR light-responsive drug release, and the integration of synergistic chemotherapy and PTT, may provide a promising strategy for the treatment of lung cancer in clinical practice.

Recent Progress of Photothermal Therapy Based on Conjugated Nanomaterials in Combating Microbial Infections

Photothermal therapy has the advantages of non-invasiveness, low toxicity, simple operation, a broad spectrum of antibacterial ability, and non-proneness to developing drug resistance, which provide it with irreplaceable superiority in fighting against microbial infection. The effect of photothermal therapy is closely related to the choice of photothermal agent. Conjugated nanomaterials are potential candidates for photothermal agents because of their easy modification, excellent photothermal conversion efficiency, good photostability, and biodegradability. In this paper, the application of photothermal agents based on conjugated nanomaterials in photothermal antimicrobial treatment is reviewed, including conjugated small molecules, conjugated oligomers, conjugated polymers, and pseudo-conjugated polymers. At the same time, the application of conjugated nanomaterials in the combination of photothermal therapy (PTT) and photodynamic therapy (PDT) is briefly introduced. Finally, the research status, limitations, and prospects of photothermal therapy using conjugated nanomaterials as photothermal agents are discussed.

Boosting the Catalytic Performance of AuAg Alloyed Nanoparticles Grafted on MoS2 Nanoflowers through NIR-Induced Light-to-Thermal Energy Conversion

MoS₂ nanoflowers (NFs) obtained through a hydrothermal approach were used as the substrate for the deposition of tiny spherical bimetallic AuAg or monometallic Au nanoparticles (NPs), leading to novel photothermal-assisted catalysts with different hybrid nanostructures and showing improved catalytic performance under NIR laser irradiation. The catalytic reduction of pollutant 4-nitrophenol (4-NF) to the valuable product 4-aminophenol (4-AF) was evaluated. The hydrothermal synthesis of MoS₂ NFs provides a material with a broad absorption in the Vis-NIR region of the electromagnetic spectrum. The in situ grafting of alloyed AuAg and Au NPs of very small size (2.0-2.5 nm) was possible through the decomposition of organometallic complexes [Au₂Ag₂(C₆F₅)₄(OEt₂)₂]_n and [Au(C₆F₅)(tht)] (tht = tetrahydrothiophene) using triisopropilsilane as reducing agent, leading to nanohybrids 1-4. The new nanohybrid materials display photothermal properties arising from NIR light absorption of the MoS₂ NFs component. The AuAg-MoS₂ nanohybrid 2 showed excellent photothermal-assisted catalytic activity for the reduction of 4-NF, which is better than that of the monometallic Au-MoS₂ nanohybrid 4. The obtained nanohybrids were characterised by transmission electron microscopy (TEM), High Angle Annular Dark Field-Scanning Transmission Electron Microscopy-Energy Dispersive X-ray Spectroscopy (HAADF-STEM-EDS), X-ray photoelectron spectroscopy and UV-Vis-NIR spectroscopy.

Two-dimensional-Ti3C2 magnetic nanocomposite for targeted cancer chemotherapy

Introduction: Cervical cancer is the leading cause of cancer-related death in women, so novel therapeutic approaches are needed to improve the effectiveness of current therapies or extend their activity. In recent decades, graphene analogs, such as Mxene, an emerging class of two-dimensional (2D) graphene analogs, have been drawing considerable attention based on their intrinsic physicochemical properties and performance as potential candidates for tumor therapy, particularly for therapeutic purposes. Here we explored the targeted drug delivery in cervical cancer in in vivo model. Mxene-based nanocarriers are not able to be precisely controlled in cancer treatment. Method: To solve this problem, the titanium carbide-magnetic core-shell nanocarrier (Ti₃C₂-Fe₃O₄@SiO₂-FA) is also developed to provide synergetic anticancer with magnetic controlling ability along with pH-responsive drug release. A xenograft model of the cervix was used to investigate the effects of Cisplatin alone, or in combination with Ti₃C₂@FA and Ti₃C₂@ Fe₃O₄@SiO₂-FA, on tumor growth following histological staining for evaluation of necrosis. Result and Discussion: A significant tumor-growth suppression effect is shown when the Ti₃C₂-Fe₃O₄@SiO₂-FA nanocarrier is magnetically controlled Cisplatin drug release. It reveals a synergistic therapeutic efficacy used in conjunction with pharmaceuticals (p < .001). According to the in vivo study, the Ti₃C₂@FA@Cisplatin nanocomposite exhibits less tumor growth than the drug alone or Ti₃C₂@FA@Cisplatin via increasing necrosis effect (p < .001). Through this study, Mxene nanosheets are expanded for biomedical applications, not only through the fabrication of biocompatible magnetic Mxene nanocomposite but also through the development of functionalization strategies that enable the magnetic Ti₃C₂ nanocomposite to load high levels of Cisplatin for cervical cancer treatment (242.5%). Hence, Ti₃C₂-Fe₃O₄@SiO₂-FA nanocarriers would be promising candidates to improve cancer treatment efficiency.

Recent advances in responsive antibacterial materials: design and application scenarios

Bacterial infection is one of the leading causes of death globally, although modern medicine has made considerable strides in the past century. As traditional antibiotics are suffering from the emergence of drug resistance, new antibacterial strategies are of great interest. Responsive materials are appealing alternatives that have shown great potential in combating resistant bacteria and avoiding the side effects of traditional antibiotics. In this review, the responsive antibacterial materials are introduced in terms of stimulus signals including intrinsic (pH, enzyme, ROS, etc.) and extrinsic (light, temperature, magnetic fields, etc.) stimuli. Their biomedical applications in therapeutics and medical devices are then discussed. Finally, the author's perspective of the challenge and the future of such a system is provided.

Multifunctional inorganic biomaterials: New weapons targeting osteosarcoma

Osteosarcoma is the malignant tumor with the highest incidence rate among primary bone tumors and with a high mortality rate. The anti-osteosarcoma materials are the cross field between material science and medicine, having a wide range of application prospects. Among them, biological materials, such as compounds from black phosphorous, magnesium, zinc, copper, silver, etc., becoming highly valued in the biological materials field as well as in orthopedics due to their good biocompatibility, similar mechanical properties with biological bones, good biodegradation effect, and active antibacterial and anti-tumor effects. This article gives a comprehensive review of the research progress of anti-osteosarcoma biomaterials.

Niobium Diselenide Nanosheets: An Emerging Biodegradable Nanoplatform for Efficient Cancer Phototheranostics in the NIR-II Window

As a prominent class of 2D transition metal dichalcogenides (TMDCs), niobium diselenide nanosheets (NbSe₂ NSs) have garnered tremendous interest on account of promising applications pertaining to optoelectronics and energy storage. Although NbSe₂ NSs have many unique advantages such as inherent biocompatibility and broad absorption in the NIR region, their biomedical applications have rarely been reported, especially as therapeutic agents for the second near-infrared (NIR-II) range. Herein, a biodegradable nanotherapeutic platform consisting of NbSe₂ NSs is designed and demonstrated for NIR-II light-triggered photothermal therapy. NbSe₂ NSs synthesized by grinding and liquid exfoliation exhibit superior photothermal conversion efficiency (48.3%) and remarkable photothermal stability in the NIR-II region. In vitro assessment demonstrates that NbSe₂ NSs have favorable photothermal cell ablation efficiency and biocompatibility. After intravenous injection in vivo, the NbSe₂ NSs accumulate passively in tumor sites to facilitate fluorescence imaging and tumor ablation by NIR-II illumination. Furthermore, as a result of gradual degradation in the physiological environment, NbSe₂ NSs can be excreted from the body to avoid potential toxicity caused by long-term retention in vivo. The results reveal a promising NIR-II light-triggered PTT strategy with the aid of NbSe₂ NSs and the platform is expected to have large potential in cancer theranostics.

Engineering tumor-specific catalytic nanosystem for NIR-II photothermal-augmented and synergistic starvation/chemodynamic nanotherapy

Background

As an emerging therapeutic modality, chemodynamic therapy (CDT), converting hydrogen peroxide (H2O2) into highly toxic reactive oxygen species (ROS), has been developed for tumor-specific therapy. However, the deficiency of endogenous H2O2 and high concentration of glutathione (GSH) in the tumor microenvironment (TME) weaken the CDT-based tumor-therapeutic efficacy. Herein, a photothermal-enhanced tumor-specific cascade catalytic nanosystem has been constructed on the basis of glucose oxidase (GOD)-functionalized molybdenum (Mo)-based polyoxometalate (POM) nanoclusters, termed as GOD@POMs.

Methods

GOD@POMs were synthesized by a facile one-pot procedure and covalently conjugation. Then, its structure was characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), Fourier transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS). In addition, ultraviolet-visible-near-infrared (UV-vis-NIR) absorption spectrum and infrared thermal camera were applied to evaluate the catalytic and photothermal performance, respectively. Moreover, to confirm the therapeutic effects in vitro, cell counting kit-8 (CCK-8) assay, live/dead staining and ROS staining were performed. Furthermore, the biosafety of GOD@POMs was investigated via blood routine, blood biochemistry and hematoxylin and eosin (H&E) staining in Kunming mice. Besides, the C6 glioma tumor-bearing mice were constructed to evaluate its anti-tumor effects in vivo and its photoacoustic (PA) imaging capability. Notably, RNA sequencing, H&E, TdT-mediated dUTP nick end labeling (TUNEL) and Ki-67 staining were also conducted to disclose its underlying anti-tumor mechanism.

Results

In this multifunctional nanosystem, GOD can effectively catalyze the oxidation of intratumoral glucose into gluconic acid and H2O2, achieving the cancer starvation therapy. Meanwhile, the generated gluconic acid decreases the pH in TME resulting in POM aggregation, which enables PA imaging-guided tumor-specific photothermal therapy (PTT), especially in the second near-infrared (NIR-II) biological window. Importantly, the Mo (VI) sites on POM can be reduced to Mo (V) active sites in accompany with GSH depletion, and then the post-produced Mo (V) transforms in situ overproduced H2O2 into singlet oxygen (1O2) via Russell mechanism, achieving self-enhanced CDT. Moreover, the PTT-triggered local tumor temperature elevation augments the synergistic nanocatalytic-therapeutic efficacy.

Conclusions

Consequently, the integration of GOD-induced starvation therapy, H2O2 self-supply/GSH-depletion enhanced Mo-based CDT, and POM aggregation-mediated PTT endow the GOD@POMs with remarkable synergistic anticancer outcomes with neglectable adverse effects.

PD-1 engineered cytomembrane cloaked molybdenum nitride for synergistic photothermal and enhanced immunotherapy of breast cancer

Incomplete tumor ablation and subsequent tumor metastasis usually occur during photothermal anti-tumor processes. The combination of photothermal and immunotherapy has proven to be a promising method to conquer technical challenges. Inhibiting the programmed death ligand-1 (PD-L1)/programmed cell death protein 1 (PD-1) immune pathway represents one of the most successful immunotherapy strategies. Whereas, the PD-L1 expression level significantly differs, leading to a relatively low response rate to the immune checkpoint blockade (ICB) approaches. Therefore, improving the expression level of PD-L1 becomes one potential method to enhance the response rate. Herein, NIH 3T3 cells were educated to steadily express PD-1 protein. Furthermore, the synthesized molybdenum nitride was then coated with PD-1 protein-modified cytomembrane, which endows it with immune checkpoint blocking capability. Moreover, under the irradiation of near-infrared light, the local mild heat released from the molybdenum nitride causes the apoptosis of tumor cells. More importantly, the elevated temperature simultaneously helps elevate the expression level of PD-L1, further enhancing the response rate of ICB. Finally, the PD-1 cytomembrane coatings interact with the upregulated PD-L1, leading to the activation of the immune system. In summary, we confirmed that the PD-1 protein-coated molybdenum nitride could synergistically ablate tumors and avoid metastasis.

Ternary and Quaternary Nanocrystalline Cu-Based Sulfides as Perspective Antibacterial Materials Mechanochemically Synthesized in a Scalable Fashion

Twelve Cu-based ternary (Cu-Me₁-S, Me₁ = Fe, Sn, or Sb) and quaternary (Cu-Me₂-Sn-S, Me₂ = Fe, Zn, or V) nanocrystalline sulfides are shown as perspective antibacterial materials here. They were prepared from elemental precursors by a one-step solvent-free mechanochemical synthesis in a 100 g batch using scalable eccentric vibratory ball milling. Most of the products have shown strong antibacterial activity against Escherichia coli and Staphylococcus aureus bacteria. For instance, stannite Cu₂FeSnS₄ and mohite Cu₂SnS₃ were the most active against E. coli, whereas kesterite Cu₂ZnSnS₄ and rhodostannite Cu₂FeSn₃S₈ exhibited the highest antibacterial activity against S. aureus. In general, stannite has shown the best antibacterial properties out of all the studied samples. Five out of twelve products have been prepared using mechanochemical synthesis for the first time in a scalable fashion here. The presented synthetic approach is a promising alternative to traditional syntheses of nanomaterials suitable for biological applications and shows ternary and quaternary sulfides as potential candidates for the next-generation antibacterial agents.

Research trends in biomedical applications of two-dimensional nanomaterials over the last decade - A bibliometric analysis

Two-dimensional (2D) nanomaterials with versatile properties have been widely applied in the field of biomedicine. Despite various studies having reviewed the development of biomedical 2D nanomaterials, there is a lack of a study that objectively summarizes and analyzes the research trend of this important field. Here, we employ a series of bibliometric methods to identify the development of the 2D nanomaterial-related biomedical field during the past 10 years from a holistic point of view. First, the annual publication/citation growth, country/institute/author distribution, referenced sources, and research hotspots are identified. Thereafter, based on the objectively identified research hotspots, the contributions of 2D nanomaterials to the various biomedical subfields, including those of biosensing, imaging/therapy, antibacterial treatment, and tissue engineering are carefully explored, by considering the intrinsic properties of the nanomaterials. Finally, prospects and challenges have been discussed to shed light on the future development and clinical translation of 2D nanomaterials. This review provides a novel perspective to identify and further promote the development of 2D nanomaterials in biomedical research.

Development of a magnetic MoS2 system camouflaged by lipid for chemo/phototherapy of cancer

Untargeted release of traditional chemotherapeutic drugs can damage normal tissues in the body and cause serious side effects for patients. Therefore, the research of targeted drug delivery system based on nanomaterials has become a hot topic in the field of cancer therapy. Magnetic molybdenum disulfide (mMoS₂) was modified by liposomes with a cell membrane-like structure to prepare nanocarrier complex (mMoS₂-Lipid) with high biocompatibility and stability. Then, combined photo-chemotherapeutic therapy was realized both in vitro and in vivo by its ultra-high photothermal conversion efficiency and excellent drug loading profile of mMoS₂-Lipid. The characterization showed that the lamellar magnetic molybdenum disulfide modified by liposomes was not easy to aggregate in physiological solution, and had a lower non-specific protein adsorption rate, which was beneficial for biomedical application. In vitro cell experiments exhibited a successful cellular uptake profile of MCF-7 cells with no significant cytotoxicity, while a concentration dependent cytotoxicity for both chemotherapy alone and photo-chemotherapy combined therapy. Compared with the unmodified mMoS₂, mMoS₂-Lipid injected into mice through tail vein can accumulate more in the tumor site, and in vivo anti-tumor studies have shown that the synergistic treatment of the mMoS₂-Lipid has an obvious inhibitory effect on the tumor with less toxic and side effects on mice. In conclusion, mMoS₂-Lipid treatment system provides a safe, rapid and effective choice for the treatment of breast cancer in the future.

2D Molybdenum Sulfide-Based Materials for Photo-Excited Antibacterial Application

Bacterial infections have seriously threatened human health and the abuse of natural or artificial antibiotics leads to bacterial resistance, so development of a new generation of antibacterial agents and treatment methods is urgent. 2D molybdenum sulfide (MoS₂ ) has good biocompatibility, high specific surface area to facilitate surface modification and drug loading, adjustable energy bandgap, and high near-infrared photothermal conversion efficiency (PCE), so it is often used for antibacterial application through its photothermal or photodynamic effects. This review comprehensively summarizes and discusses the fabrication processes, structural characteristics, antibacterial performance, and the corresponding mechanisms of MoS₂ -based materials as well as their representative antibacterial applications. In addition, the outlooks on the remaining challenges that should be addressed in the field of MoS₂ are also proposed.

Nanophysical Antimicrobial Strategies: A Rational Deployment of Nanomaterials and Physical Stimulations in Combating Bacterial Infections

The emergence of bacterial resistance due to the evolution of microbes under antibiotic selection pressure, and their ability to form biofilm, has necessitated the development of alternative antimicrobial therapeutics. Physical stimulation, as a powerful antimicrobial method to disrupt microbial structure, has been widely used in food and industrial sterilization. With advances in nanotechnology, nanophysical antimicrobial strategies (NPAS) have provided unprecedented opportunities to treat antibiotic-resistant infections, via a combination of nanomaterials and physical stimulations. In this review, NPAS are categorized according to the modes of their physical stimulation, which include mechanical, optical, magnetic, acoustic, and electrical signals. The biomedical applications of NPAS in combating bacterial infections are systematically introduced, with a focus on their design and antimicrobial mechanisms. Current challenges and further perspectives of NPAS in the clinical treatment of bacterial infections are also summarized and discussed to highlight their potential use in clinical settings. The authors hope that this review will attract more researchers to further advance the promising field of NPAS, and provide new insights for designing powerful strategies to combat bacterial resistance.

Molybdenum disulfide (MoS2)-based nanostructures for tissue engineering applications: prospects and challenges

Molybdenum disulfide (MoS₂) nanostructures have recently earned substantial thoughts from the scientific communities owing to their unique physicochemical, optical and electrical properties. Although MoS₂ has been mostly highlighted for its industrial applications, its biological applicability has not been extensively explored. The introduction of nanotechnology in the field of tissue engineering has significantly contributed to human welfare by displaying advancement in tissue regeneration. Assimilation of MoS₂ nanostructures into the polymer matrix has been considered a persuasive material of choice for futuristic tissue engineering applications. The current review provides a general discussion on the structural properties of different MoS₂ nanostructures. Further, this article focuses on the interactions of MoS₂ with biological systems in terms of its cellular toxicity, and biocompatibility along with its capability for cell proliferation, adhesion, and immunomodulation. The article continues to confer the utility of MoS₂ nanostructure-based scaffolds for various tissue engineering applications. The article also highlights some emerging prospects and possibilities of the applicability of MoS₂-based nanostructures in large organ tissue engineering. Finally, the article concludes with a brief annotation on the challenges and limitations that need to be overcome in order to make plentiful use of this wonderful material for tissue engineering applications.

Her3-specific affibody mediated tumor targeting delivery of ICG enhanced the photothermal therapy against Her3-positive tumors

Photothermal therapy (PTT), mediated by tumor-targeted drug delivery of indocyanine green (ICG), is a promising strategy for cancer therapy. Human epidermal growth factor receptor 3 (Her3) is highly expressed in several solid tumors and is an ideal target for tumor diagnosis and therapy. This study prepared a Her3-specific dimeric affibody (Z_Her3) using an Escherichia coli expression system. The affibody could bind explicitly to Her3-positive MCF7 and LS174T cells, rather than to Her3-negative SKOV-3 cells in vitro. ICG was coupled with the Z_Her3 affibody (ICG-Z_Her3) through an N-hydroxysuccinimide (NHS) ester reactive group for tumor-targeted delivery. As expected, Her3-positive cells were selectively and efficiently killed by ICG-Z_Her3-mediated PTT in vitro. In vivo, ICG-Z_Her3 preferentially accumulated in Her3-positive LS174T tumor grafts because of the tumor-targeting ability of the Z_Her3 affibody. As a result of the local generation of cytotoxic reactive oxygen species and hyperthermia, the growth rates of LS174T tumor grafts were significantly inhibited by ICG-Z_Her3-mediated PTT, and ICG-Z_Her3 showed good safety performance during short-term treatment. In conclusion, these results demonstrated that ICG-Z_Her3 is a promising photosensitizer for PTT against Her3-positive tumors.

Controlled decoration of nanoceria on the surface of MoS2nanoflowers to improve the biodegradability and biocompatibility inDrosophila melanogastermodel

In recent years, nanozymes based on two-dimensional (2D) nanomaterials have been receiving great interest for cancer photothermal therapy. 2D materials decorated with nanoparticles (NPs) on their surface are advantageous over conventional NPs and 2D material based systems because of their ability to synergistically improve the unique properties of both NPs and 2D materials. In this work, we report a nanozyme based on flower-like MoS₂nanoflakes (NFs) by decorating their flower petals with NCeO₂using polyethylenimine (PEI) as a linker molecule. A detailed investigation on toxicity, biocompatibility and degradation behavior of fabricated nanozymes in wild-typeDrosophila melanogastermodel revealed that there were no significant effects on the larval size, morphology, larval length, breadth and no time delay in changing larvae to the third instar stage at 7-10 d for MoS₂NFs before and after NCeO₂decoration. The muscle contraction and locomotion behavior of third instar larvae exhibited high distance coverage for NCeO₂decorated MoS₂NFs when compared to bare MoS₂NFs and control groups. Notably, the MoS₂and NCeO₂-PEI-MoS₂NFs treated groups at 100μg ml^-1covered a distance of 38.2 mm (19.4% increase when compared with control) and 49.88 mm (no change when compared with control), respectively. High-resolution transmission electron microscopy investigations on the new born fly gut showed that the NCeO₂decoration improved the degradation rate of MoS₂NFs. Hence, nanozymes reported here have huge potential in various fields ranging from biosensing, cancer therapy and theranostics to tissue engineering and the treatment of Alzheimer's disease and retinal therapy.

Tri-functional SERS nanoplatform with tunable plasmonic property for synergistic antibacterial activity and antibacterial process monitoring

Strategies integrating synergistic high-efficiency bacterial killing and antibacterial process monitoring capability are desirable. Herein, a tri-functional surface-enhanced Raman spectroscopy (SERS) nanoplatform, namely 4-mercaptobenzoic acid-encoded gold nanorods@silver coated with a layer of bovine serum albumin (AuNRs@Ag@4-MBA@BSA), with excellent biocompatibility, stability, tunable plasmonic property and activatable photothermal effect is introduced for Ag⁺/photothermal therapy (PTT) synergistic antibacterial activity and antibacterial process monitoring. An exogenous etchant is used to controllably model the physiological process of metallic silver biodegradation. Ag shell etching causes the surface plasmon resonance band of SERS nanotags to red-shift to near-infrared region, activates the photothermal conversion capability, and triggers PTT, which in turn accelerates Ag shell etching. The antibacterial rates for Staphylococcus aureus and Escherichia coli after 10 min treatment can achieve 99.5% and 99.9%, respectively. Furthermore, the near-field effect and ultrasensitive property render the SERS intensity decrease ratio is dependent on Ag shell etching as well as temperature rising and thus relevant to antibacterial activity. We have demonstrated a strong correlation between SERS signal and antibacterial effect, and have verified the possibility of antibacterial process monitoring in vitro using SERS-based methodology. We envision that our integrated strategy being used for in vivo high-efficiency bacterial killing and antibacterial process monitoring.

Graphene-based nanomaterials for cancer therapy and anti-infections

Graphene-based nanomaterials (GBNMs) has been thoroughly investigated and extensively used in many biomedical fields, especially cancer therapy and bacteria-induced infectious diseases treatment, which have attracted more and more attentions due to the improved therapeutic efficacy and reduced reverse effect. GBNMs, as classic two-dimensional (2D) nanomaterials, have unique structure and excellent physicochemical properties, exhibiting tremendous potential in cancer therapy and bacteria-induced infectious diseases treatment. In this review, we first introduced the recent advances in development of GBNMs and GBNMs-based treatment strategies for cancer, including photothermal therapy (PTT), photodynamic therapy (PDT) and multiple combination therapies. Then, we surveyed the research progress of applications of GBNMs in anti-infection such as antimicrobial resistance, wound healing and removal of biofilm. The mechanism of GBNMs was also expounded. Finally, we concluded and discussed the advantages, challenges/limitations and perspective about the development of GBNMs and GBNMs-based therapies. Collectively, we think that GBNMs could be potential in clinic to promote the improvement of cancer therapy and infections treatment.

•

Development of GBNMs with unique structure and excellent properties.

•

GBNMs-based therapies for anticancer with improved therapeutic efficacy.

•

GBNMs with antimicrobial activity are widely used in anti-infections.

•

The challenges and perspective of GBNMs for clinical use were thoroughly discussed.

Influence of noncovalent intramolecular and host–guest interactions on imatinib binding to MoS2 sheets: a PXRD/DFT study

The revealed pattern of imatinib drug binding to MoS2 sheets is promising for the combined exploitation of these species for therapeutic purposes.

An erythrocyte membrance-camouflaged biomimetic nanoplatform for enhanced chemo-photothermal therapy of breast cancer

Nano drug delivery system is a research hotspot in the field of tumor therapy. Molybdenum disulfide (MoS2) nanosheet was selected as the base material and natural red blood cell membrane...

Phototherapy and optical waveguides for the treatment of infection

With rapid emergence of multi-drug resistant microbes, it is imperative to seek alternative means for infection control. Optical waveguides are an auspicious delivery method for precise administration of phototherapy. Studies have shown that phototherapy is promising in fighting against a myriad of infectious pathogens (i.e. viruses, bacteria, fungi, and protozoa) including biofilm-forming species and drug-resistant strains while evading treatment resistance. When administered via optical waveguides, phototherapy can treat both superficial and deep-tissue infections while minimizing off-site effects that afflict conventional phototherapy and pharmacotherapy. Despite great therapeutic potential, exact mechanisms, materials, and fabrication designs to optimize this promising treatment option are underexplored. This review outlines principles and applications of phototherapy and optical waveguides for infection control. Research advances, challenges, and outlook regarding this delivery system are rigorously discussed in a hope to inspire future developments of optical waveguide-mediated phototherapy for the management of infection and beyond.

A biodegradable and near-infrared light-activatable photothermal nanoconvertor for bacterial inactivation

The development of biodegradable nanomaterials for near-infrared photothermal antibacterial is of great significance to improve the biosafety of nano-antibacterial strategies in clinical application. In this study, a new nano-antibacterial strategy was developed, in which a biodegradable charge-transfer nanocomplex acted as a high-efficiency near-infrared light-activatable photothermal nanoconvertor. The charge-transfer nanocomplex was synthesized through oxidation-induced self-assembly of 3,3',5,5'-tetramethylbenzidine molecules. This nanocomplex can efficiently convert light energy around 900 nm into heat energy, with a photothermal conversion efficiency of up to 30%. More importantly, the nanocomplex can spontaneously degrade under physiological conditions within 12 hours. Utilizing the photothermal effect of this nanocomplex, both Gram-positive bacteria and Gram-negative bacteria can be inactivated within 2 minutes. In addition, the inactivation mechanism was systematically discussed and the results indicated that the photothermal effect induced bacterial cell membrane damage was probably responsible for the antibacterial effect.

Metallic Nanoparticle-Mediated Immune Cell Regulation and Advanced Cancer Immunotherapy

Cancer immunotherapy strategies leveraging the body's own immune system against cancer cells have gained significant attention due to their remarkable therapeutic efficacy. Several immune therapies have been approved for clinical use while expanding the modalities of cancer therapy. However, they are still not effective in a broad range of cancer patients because of the typical immunosuppressive microenvironment and limited antitumor immunity achieved with the current treatment. Novel approaches, such as nanoparticle-mediated cancer immunotherapies, are being developed to overcome these challenges. Various types of nanoparticles, including liposomal, polymeric, and metallic nanoparticles, are reported for the development of effective cancer therapeutics. Metallic nanoparticles (MNPs) are one of the promising candidates for anticancer therapy due to their unique theranostic properties and are thus explored as both imaging and therapeutic agents. In addition, MNPs offer a dense surface functionalization to target tumor tissue and deliver genetic, therapeutic, and immunomodulatory agents. Furthermore, MNPs interact with the tumor microenvironment (TME) and regulate the levels of tumor hypoxia, glutathione (GSH), and reactive oxygen species (ROS) for remodulation of TME for successful therapy. In this review, we discuss the role of nanoparticles in tumor microenvironment modulation and anticancer therapy. In particular, we evaluated the response of MNP-mediated immune cells, such as dendritic cells, macrophages, T cells and NK cells, against tumor cells and analyzed the role of MNP-based cancer therapies in regulating the immunosuppressive environment.

Recent Advances in 2D Material-Mediated Immuno-Combined Cancer Therapy

In the last years, cancer immunotherapy has started to attract a lot of attention, becoming one of the alternatives in the clinical treatment of cancer. Indeed, one of the advantages of immunotherapy is that both primary and distant tumors can be efficiently eradicated through a triggered immune response. Due to their large specific surface area and unique physicochemical properties, 2D materials have become popular in cancer immunotherapy, especially as efficient drug carriers. They have been also exploited as photothermal platforms, chemodynamic agents, and photosensitizers to further enhance the efficacy of the therapy. In this review, the focus is on the recent development of 2D materials as new tools to combine immunotherapy with chemotherapy, photothermal therapy, photodynamic therapy, chemodynamic therapy, radiotherapy, and radiodynamic therapy. These innovative synergistic approaches intend to go beyond the classical strategies based on a simple delivery function of immune modulators by nanomaterials. Furthermore, the effects of the 2D materials themselves and their surface properties (e.g., chemical modification and protein corona formation) on the induction of an immune response will be also discussed.

MoS2-based nanocomposites for cancer diagnosis and therapy

Molybdenum is a trace dietary element necessary for the survival of humans. Some molybdenum-bearing enzymes are involved in key metabolic activities in the human body (such as xanthine oxidase, aldehyde oxidase and sulfite oxidase). Many molybdenum-based compounds have been widely used in biomedical research. Especially, MoS2-nanomaterials have attracted more attention in cancer diagnosis and treatment recently because of their unique physical and chemical properties. MoS2 can adsorb various biomolecules and drug molecules via covalent or non-covalent interactions because it is easy to modify and possess a high specific surface area, improving its tumor targeting and colloidal stability, as well as accuracy and sensitivity for detecting specific biomarkers. At the same time, in the near-infrared (NIR) window, MoS2 has excellent optical absorption and prominent photothermal conversion efficiency, which can achieve NIR-based phototherapy and NIR-responsive controlled drug-release. Significantly, the modified MoS2-nanocomposite can specifically respond to the tumor microenvironment, leading to drug accumulation in the tumor site increased, reducing its side effects on non-cancerous tissues, and improved therapeutic effect. In this review, we introduced the latest developments of MoS2-nanocomposites in cancer diagnosis and therapy, mainly focusing on biosensors, bioimaging, chemotherapy, phototherapy, microwave hyperthermia, and combination therapy. Furthermore, we also discuss the current challenges and prospects of MoS2-nanocomposites in cancer treatment.

Co-Delivery of Doxorubicin and Chloroquine by Polyglycerol Functionalized MoS2 Nanosheets for Efficient Multidrug-Resistant Cancer Therapy

2D MoS₂ has shown a great potential in biomedical applications, due to its superior loading capacity, photothermal property, and biodegradation. In this work, polyglycerol functionalized MoS₂ nanosheets with photothermal and pH dual-stimuli responsive properties are used for the co-delivery of doxorubicin and chloroquine and treatment of multidrug-resistant HeLa (HeLa-R) cells. The polyglycerol functionalized MoS₂ nanosheets with 80 nm average size show a high biocompatibility and loading efficiency (≈90%) for both drugs. The release of drugs from the nanosheets at pH 5.5 is significantly promoted by laser irradiation leading to efficient destruction of incubated HeLa-R cells. In vitro evaluation shows that the designed nanoplatform has a high ability to kill HeLa-R cells. Confocal experiments demonstrate that the synthesized drug delivery system enhances the cellular uptake of DOX via folic acid targeting ligand. Taking advantage of the combined properties including biocompatibility and targeting ability as well as high loading capacity and photothermal release, this multifunctional nanosystem is a promising candidate for anticancer therapy.

Leveraging BODIPY nanomaterials for enhanced tumor photothermal therapy

In the past ten years, photothermal therapy (PTT) has attracted widespread attention in tumor treatment due to its non-invasiveness and little side effects. PTT utilizes heat produced by photothermal agents under the irradiation of near-infrared light to kill tumor cells. Boron-dipyrromethene (BODIPY), an organic phototherapy agent, has been widely used in tumor phototherapy due to its higher molar extinction coefficient, robust photostability and good phototherapy effect. However, there are some issues in the application of BODIPY for tumor PTT, such as low photothermal conversion efficiency and short absorption wavelength. In this review, we focus on the latest development of BODIPY nanomaterials for overcoming the above problems and enhancing the PTT effect.

Recent Progress on NIR-II Photothermal Therapy

Photothermal therapy is a very promising treatment method in the field of cancer therapy. The photothermal nanomaterials in near-infrared region (NIR-I, 750-900 nm) attracts extensive attention in recent years because of the good biological penetration of NIR light. However, the penetration depth is still not enough for solid tumors due to high tissue scattering. The light in the second near-infrared region (NIR-II, 1000-1700 nm) allows deeper tissue penetration, higher upper limit of radiation and greater tissue tolerance than that in the NIR-I, and it shows greater application potential in photothermal conversion. This review summarizes the photothermal properties of Au nanomaterials, two-dimensional materials, metal oxide sulfides and polymers in the NIR-II and their application prospects in photothermal therapy. It will arouse the interest of scientists in the field of cancer treatment as well as nanomedicine.

Synthesis of photothermal antimicrobial cotton gauze using AuNPs as photothermal transduction agents

Cotton gauze has been used as a wound dressing since the 19th century, and still plays an important role in current clinical therapies. However, the antimicrobial ability of cotton gauze is limited. In this work, gold nanoparticles (AuNPs) were used as photothermal transduction agents to synthesize modified photothermal antimicrobial cotton gauze. The modified cotton gauze was synthesized by immersing and heating the clinical cotton gauze with AuNPs solution. XPS, ICP-OES, FTIR, XRD and SEM characterizations confirmed that AuNPs were successfully decorated on the surface of cotton gauzes. Besides, the mechanical properties, air and water vapour permeability performance of cotton gauze were not changed after modification. Photothermal antimicrobial experiments confirmed that AuNPs modified on the cotton gauze could convert light to heat, inducing rapid temperature increase of the cotton gauze. And the heat could kill microbial cells permeated in the modified cotton gauze, giving it the potential of being used for photothermal antimicrobial therapy.

Modification of magnetic molybdenum disulfide by chitosan/carboxymethylcellulose with enhanced dispersibility for targeted photothermal-/chemotherapy of cancer

In this work, magnetic molybdenum disulfide (mMoS2) was synthesized firstly. Then, layer-by-layer (LbL) self-assembly technology was used for the preparation of chitosan/carboxymethylcellulose functionalized mMoS2 nanocomposites. The nanocomposites with the diameter of 0.4 μm did not easily agglomerate in biological suspensions, thus had good dispersion and stability. Simultaneously, mMoS2-CS/CMC strongly inhibited the adsorption of non-specific proteins to mMoS2. In a drug loading experiment, in which doxorubicin hydrochloride (DOX) was used as a model drug, it was found that the drug loading capacity of mMoS2-CS/CMC was high and the drug loading rate could reach 86%. When the drug was released, mMoS2-CS/CMC-DOX showed an obvious pH-dependent release behavior. In cellular studies, the nanocomposites were easily taken up by tumor cells, and mainly located in the cytoplasm. The pure carrier materials had good biocompatibility with no obvious cytotoxicity, but they could cause dose-dependent cytotoxicity after DOX loading. Moreover, mMoS2-CS/CMC had an excellent photothermal effect, and an in vivo study showed that after it was injected into mice, more nanocomposites concentrated in the tumor site than mMoS2, indicating the tumor targeting properties. Therefore, the modification of mMoS2 with chitosan and sodium carboxymethylcellulose will promote the development of tumor therapy.

Biosafety, Nontoxic Nanoparticles for VL-NIR Photothermal Therapy Against Oral Squamous Cell Carcinoma

Semiconductor nanocrystals with extraordinary physicochemical and biosafety properties with unique nanostructures have shown tremendous potential as photothermal therapy (PTT) nanosensitizers. Herein, we successfully synthesized chiral molybdenum (Cys-MoO_3–x) nanoparticles (NPs) for overcoming the general limitation on electron energy bands and biotoxicity. The obtained Cys-MoO_3–x NPs are selected as an ideal design for the treatment of oral squamous cell carcinoma (OSCC) cells through the decoration of cysteine molecules due to excellent initial photothermal spectral analysis of conductivity and light absorbance. Notably, NPs possess the ability to act as visible light (VL) and near-infrared (NIR) double-reactive agents to ablate cancer cells. By combining photoconductive PTT with hypotoxicity biochemotherapy, the treatment validity of OSCC cancer cells can be improved in vitro by up to 89% (808 nm) and get potential PTT effect under VL irradiation, which intuitively proved that the nontoxic NPs were lethally effective for cancer cells under laser irradiation. Hence, this work highlights a powerful and safe NP platform for NIR light-triggered PTT for use in head and neck cancer (HNC) cells, showing promising application prospects in oral tumor treatment.

The recent progress in photothermal-triggered bacterial eradication

Increasing evidence suggested that bacterial infection diseases posed a great threat to human health and became the leading cause of mortality. However, the abuse of antibiotics and their residues in the environment result in the emergence and prevalence of drug-resistant bacteria. Photothermal therapy (PTT) has received considerable attention owing to its noninvasiveness, and proved to be promising in preventing bacterial infection diseases. In this review, we first surveyed the recent progress of PTT-based responsive targeting strategies for bacterial killing. We then highlighted the PTT-based smart designs of bio-films, hydrogels and synergistic methods for treating bacterial infections. Existing challenges and perspectives are also discussed to inspire the future development of a PTT-based platform for the efficient therapy of bacterial infections.

A synergistic antibacterial platform: combining mechanical and photothermal effects based on Van-MoS2-Au nanocomposites

Herein, we successfully developed a new multifunctional antibacterial system, which combined mechano-bactericidal (Au-nanostars) and photothermal (MoS₂) mechanism. Meanwhile, the targeting molecule of vancomycin was modified on the surface of MoS₂-Au nanocomposites (Van-MoS₂-Au), that generally yield high efficiency in antibacterial performance due to their effective working radii. Van-MoS₂-Au nanocomposites were capable of completely destroying both gram-negative (E. coli) and gram-positive (B. subtilis) bacteria under 808 NIR laser irradiation for 20 min, and nearly no bacterial growth was detected after 12 h incubation. Moreover, these nanocomposites could destruct the refractory biofilm as well, which was a much more difficult medical challenge. The new antibacterial nanomaterials might offer many biomedical applications because of the biocompatibility and strong antibacterial ability.

Surface chemistry regulates the optical properties and cellular interactions of ultrasmall MoS2 quantum dots for biomedical applications

Molybdenum disulfide quantum dots (MoS2 QDs) have drawn increasing attention owing to their distinct optical properties and potential applications in many fields such as biosensing, photocatalysis and cell imaging. Elucidating the relationship between the surface chemistry of MoS2 QDs and their optical properties as well as biological behaviors is critical for their practical applications, which remain largely unclear. Herein, by adopting a sulfur vacancy modification strategy, a toolbox of MoS2 QDs functionalized with different thiolate ligands was prepared. The effect of surface chemistry on the optical properties of MoS2 QDs was systematically explored by various spectroscopic techniques, revealing the important role of surface ligands in defining their absorption band gap and luminescence quantum yield. Furthermore, cellular experiments showed that the cytotoxicity and intracellular fate (i.e., lysosomal accumulation) of MoS2 QDs are closely related to the properties of surface ligands. Our results underscore the important roles of surface ligands in regulating the properties and biological interactions of these QDs, which will facilitate the future development of MoS2-based materials with precisely controlled functions for biomedical applications.

Photothermally Active Cryogel Devices for Effective Release of Antimicrobial Peptides: On-Demand Treatment of Infections

There has been significant interest in the use of peptides as antimicrobial agents, and peptide containing hydrogels have been proposed as biological scaffolds for various applications. Limited stability and rapid clearance of small molecular weight peptides pose challenges to their widespread implementation. As a common approach, antibacterial peptides are physically loaded into hydrogel scaffolds, which leads to continuous release through the passive mode with spatial control but provides limited control over drug dosage. Although utilization of peptide covalent linkage onto hydrogels addresses partially this problem, the peptide release is commonly too slow. To alleviate these challenges, in this work, maleimide-modified antimicrobial peptides are covalently conjugated onto furan-based cryogel (CG) scaffolds via the Diels-Alder cycloaddition at room temperature. The furan group offers a handle for specific loading of the peptides, thus minimizing passive and burst drug release. The porous nature of the CG matrix provides rapid loading and release of therapeutic peptides, apart from high water uptake. Interfacing the peptide adduct containing a CG matrix with a reduced graphene oxide-modified Kapton substrate allows "on-demand" photothermal heating upon near-infrared (NIR) irradiation. A fabricated photothermal device enables tunable and efficient peptide release through NIR exposure to kill bacteria. Apart from spatial confinement offered by this CG-based bandage, the selective ablation of planktonic Staphylococcus aureus is demonstrated. It can be envisioned that this modular "on-demand" peptide-releasing device can be also employed for other topical applications by appropriate choice of therapeutic peptides.

Photodynamic Nanophotosensitizers: Promising Materials for Tumor Theranostics

Photodynamic theranostics/therapy (PDT) is a potential strategy for selectively imaging malignant sites and treating cancer via a non-invasive therapeutic method. Photosensitizers, the crucial components of PDT, enable colocalization of photons and light, and photon/light therapy in the therapeutic window of 400-900 nm exhibits photocytotoxicity to tumor cells. Due to their high biostability and photocytotoxicity, nanophotosensitizers (NPSs) are of much interest for malignant tumor theranostics at present. NPS-activated photons transfer energy through the absorption of a photon and convert molecular oxygen to the singlet reactive oxygen species, which leads to apoptosis and necrosis. Moreover, NPSs modified by polymers, including PLGA, PEG-PLA, PDLLA, PVCL-g-PLA, and P(VCL-co-VIM)-g-PLA, exhibit excellent biocompatibility, and a tumor-targeting molecule linked on the nanoparticle surface can precisely deliver NPSs into the tumor region. The development of NPSs will accelerate the progress in tumor theranostics through the photon/light pathway.

Bioinspired biliverdin/silk fibroin hydrogel for antiglioma photothermal therapy and wound healing

Rationale: Photothermal therapy employs the photoabsorbers to generate heat under the near-infrared (NIR) irradiation for thermal tumor ablation. However, NIR irradiation might damage the adjacent tissue due to the leakage of the photoabsorbers and the residual materials after treatment might hinder the local healing process. A bifunctional hydrogel that holds both photothermal property and potent pro-healing ability provides a viable option to resolve this issue. Methods: In this study, we developed a bioinspired green hydrogel (BVSF) with the integration of bioproduct biliverdin into natural derived silk fibroin matrix for antiglioma photothermal therapy and wound healing. Results: The BVSF hydrogel possessed excellent and controllable photothermal activity under NIR irradiation and resulted in effective tumor ablation both in vitro and in vivo. Additionally, the BVSF hydrogel exerted anti-inflammatory effects both in vitro and in vivo, and stimulated angiogenesis and wound healing in a full-thickness defect rat model. Conclusion: Overall, this proof-of-concept study was aimed to determine the feasibility and reliability of using an all-natural green formulation for photothermal therapy and post-treatment care.