Development of leaf-adhesive pesticide nanocapsules with pH-responsive release to enhance retention time on crop leaves and improve utilization efficiency

Layer-by-layer assembled decomposable nanocapsules for light-responsive release of pesticide imidacloprid on Aphis craccivora Koch

BACKGROUND

Conventional pesticide formulations are often inefficient because of low biological uptake after spraying. Controlled release nanopesticides can release pesticides precisely in response to specific stimuli, thereby killing pests and pathogens using the least effective concentration. This study aims to develop nanocapsule-based photo-decomposable nanopesticides for efficient pesticide control.

RESULTS

The target nanopesticides were successfully fabricated using layer-by-layer assembly of the negative azobenzene-grafted hyaluronic acid (azo-HA) and positive polydimethyldiallylammonium chloride (polyDADMAC), confirmed by UV-visible, dynamic light scattering, Zeta potential and transmission electron microscopy measurements. The particle size and Zeta potential of the fabricated nanocapsules were 220 nm and +46.1 mV, respectively, and the nanocapsules were found to remain stable for up to 30 days. The optimized drug loading and encapsulation ratio of imidacloprid (IMI) in IMI/azo-HA@polyDADMAC were 21.5% and 91.3%, respectively. Cumulative release of IMI from the nanopesticides increased from ~50% to ~95% upon UV light irradiation (365 nm). The half lethal concentration (LC50) value of the nanopesticides toward Aphis craccivora Koch decreased from 2.22 to 0.55 mg L-1 upon UV light irradiation.

CONCLUSION

The trans to cis transformation of the azo group in HA decomposed IMI/azo-HA@polyDADMAC nanopesticides upon UV irradiation, thus facilitating the release of IMI, resulting in a decrease in the concentration of pesticides required for efficient pesticide control. Our work demonstrated the great potential of light-responsive nanocapsules as a controlled release nanocarrier for efficient and eco-friendly pesticide control in sustainable agriculture. © 2024 Society of Chemical Industry.

The key factors of solid nanodispersion for promoting the bioactivity of abamectin

Solid nanodispersion (SND) is an important variety of nanopesticides which have been extensively studied in recent years. However, the key influencing factors for bioactivity enhancement of nanopesticides remain unclear, which not only limits the exploration of relevant mechanisms, but also hinders the precise design and development of nanopesticides. In this study, we explored the potential of SND in enhancing the bioactivity of nanopesticides, specifically focusing on abamectin SND prepared using a self-emulsifying-carrier solidifying technique combined with parameter optimization. Our formulation, consisting of 8% abamectin, 1% antioxidant BHT (2,6-di-tert-butyl-4-methylphenol), 12% complex surfactants, and 79% sodium benzoate, significantly increased the pseudo-solubility of abamectin by at least 3300 times and reduced its particle size to a mere 15 nm, much smaller than traditional emulsion in water (EW) and water-dispersible granule (WDG) forms. This reduction in particle size and increase in surface activity resulted in improved foliar adhesion and retention, enabling a more efficient application without the need for organic solvents. The inclusion of antioxidants also enhanced photostability compared to EW, and overall stability tests confirmed SND's resilience under various storage conditions. Bioactivity tests demonstrated a marked increase in toxicity against diamondback moths (Plutella xylostella L.) with abamectin SND, which exhibited 3.7 and 7.6 times greater efficacy compared to EW and WDG, respectively. These findings underscore the critical role of small particle size, high surface activity, and strong antioxidant properties in improving the performance and bioactivity of abamectin SND, highlighting its significance in the design and development of high-efficiency, eco-friendly nanopesticides and contributing valuably to sustainable agricultural practices.

Recent Advances in Stimulus-Responsive Nanocarriers for Pesticide Delivery

In an effort to make pesticide use safer, more efficient, and sustainable, micro-/nanocarriers are increasingly being utilized in agriculture to deliver pesticide-active agents, thereby reducing quantities and improving effectiveness. In the use of nanopesticides, the choice to further design and prepare pesticide stimulus-responsive nanocarriers based on changes in the plant growth environment (light, temperature, pH, enzymes, etc.) has received more and more attention from researchers. Based on this, this paper examines recent advancements in nanomaterials for the design of stimulus-responsive micro-/nanocarriers. It delves into the intricacies of preparation methods, material enhancements, in vivo/ex vivo controlled release, and application techniques for controlled release formulations. The aim is to provide a crucial reference for harnessing nanotechnology to pursue reduced pesticide use and increased efficiency.

O-nitrobenzyl Caged Molecule Enables Photo-controlled Release of Thiabendazole

Pesticides are essential in agricultural development. Controlled-release pesticides have attracted great attentions. Base on a principle of spatiotemporal selectivity, we extended the photoremovable protective group (PRPG) into agrochemical agents to achieve controllable release of active ingredients. Herein, we obtained NP-TBZ by covalently linking o-nitrobenzyl (NP) with thiabendazole (TBZ). Compound NP-TBZ can be controlled to release TBZ in dependent to light. The irradiated and unirradiated NP-TBZ showed significant differences on fungicidal activities both in vitro and in vivo. In addition, the irradiated NP-TBZ displayed similar antifungal activities to the directly-used TBZ, indicating a factual applicability in controllable release of TBZ. Furthermore, we explored the action mode and microcosmic variations by SEM analysis, and demonstrated that the irradiated NP-TBZ retained a same action mode with TBZ against mycelia growth.

Encapsulated nanopesticides application in plant protection: Quo vadis?

The increased global food insecurity due to the growing population can be addressed with precision and sustainable agricultural practices. To tackle the issues regarding food insecurity, farmers used different agrochemicals that improved plant growth and protection. Among these agrochemicals, synthetic pesticides used for plant protection in the agricultural field have various disadvantages. Conventional applications of synthetic pesticides have drawbacks such as rapid degradation, poor solubility, and non-target effects, as well as increased pesticide runoff that pollutes the environment. Nanotechnology has evolved as a potential solution to increase agricultural productivity through the development of different nanoforms of agrochemicals such as nanopesticides, nano-fabricated fertilizers, nanocapsules, nanospheres, nanogels, nanofibers, nanomicelles, and nano-based growth promoters. Encapsulation of these pesticides inside the nanomaterials has provided good biocompatibility over conventional application by inhibiting the early degradation of active ingredients (AI), increasing the uptake and adhesion of pesticides, improving the stability, solubility, and permeability of the pesticides, and decreasing the environmental impacts due to the pesticide runoff. In this review, different nanoforms of encapsulated pesticides and their smart delivery systems; nanocarriers in RNA interference (RNAi) based pesticides; environmental fate, practical implications, management of nanopesticides; and future perspectives are discussed.

Can nanotechnology improve the application of bioherbicides?

Bioherbicides are composed of microorganisms or natural compounds and are used for weed control; however, they have specific weaknesses and constraints that hinder their development and success under field conditions. Nanotechnology can help to overcome these limitations by providing a good starting point for the design of specific formulations and carriers that minimize the deficiencies of natural compounds and microorganisms, such as low solubility, short shelf life or a loss of viability. In addition, nanoformulations can help to improve the efficacy of bioherbicides by increasing their effectiveness and bioavailability, reducing the amount required for a treatment, and enhancing their ability to target specific weeds while preserving the crop. However, it is important to choose the right materials and nanodevices depending on specific needs and considering several factors inherent to nanomaterials such as production cost, safety or possible toxic effects. © 2023 Society of Chemical Industry.

Preparation and activity of sodium carboxymethyl cellulose (CMC-Na) and Metarhizium rileyi ZHKUMR1 composite membrane

Improving the adhesion capability of Metarhizium rileyi ZHKUMR1 on leaves enabled by the combination with Carboxymethyl Cellulose (CMCNa) materials is feasible to improve the utilization rate of Metarhizium rileyi. Herein, the CMC-Na-ZHKUMR1 membrane was prepared by simply mixing Carboxymethyl Cellulose (CMCNa) with Metarhizium rileyi. Through compatibility test, it was found that the inhibition rates of spore germination and mycelial growth of ZHKUMR1 were only 1.51 % and 3.13 % when the concentration of Carboxymethyl Cellulose (CMCNa) was 0.5 %. By adding 2 % of Carboxymethyl Cellulose (CMCNa) under UV irradiation for 30 min, the protective rate of spore germination of ZHKUMR1 was up to ~12.44 %, where the wettability on corn leaves was achieved and the retention of ZHKUMR1 spores on corn leaves was increased. After indoor activity determination, it was found that after 3 min of simulated rain washing, the lethal rate of corn leaves pretreated with CMC-Na-ZHKUMR1 on the 2nd instar larvae of Spodoptera frugiperda was 46.67 %, which was much higher than that of ZHKUMR1 spore suspension alone. This work clearly showed that Carboxymethyl Cellulose (CMCNa) effectively improved the field application effect of Metarhizium rileyi ZHKUMR1, and this strategy provided guidance for improving the field efficacy of Metarhizium rileyi ZHKUMR1.

Washout-Resistant, pH-Responsive Anti-TMV Nanoimmune Inducer Based on Cellulose Nanocrystals

The application of antiplant virus agents on leaf surfaces faces challenges due to their vulnerability to wear, instability, and limited duration, which in turn jeopardizes plant health and yield. In recent years, high-aspect-ratio nanomaterials have gained prominence as powerful carriers for disease treatment, thanks to their exceptional penetrability and precise drug delivery capabilities. Here, we synthesized a pH-responsive nanoimmune inducer (CNC-AMO) with strong leaf adhesion through a Schiff base reaction, achieved by grafting amino-oligosaccharides (AMOs) on the surface of aldehyde-based CNC (CNC-CHO). Fourier transform infrared spectrometry, zeta potential, X-ray photoelectron spectroscopy, X-ray diffraction, transmission electron microscopy, atomic force microscopy, scanning electron microscopy, thermogravimetric analysis, and elemental analysis were used to characterize the CNC-AMO. The CNC-AMO displayed the capability for pH-responsive AMO release, showcasing its potential for targeted and controlled delivery. When applied to plants, the CNC-AMO exhibited impressive anti-TMV efficacy during a weeklong observation period. Meanwhile, the CNC-AMO exhibited remarkable adhesion and scouring resistance on the surfaces of the plant leaves. We strongly believe that the synergy of environmentally friendly synthetic materials, efficient plant virus control, and streamlined scalability positions CNC-AMOs as a promising pesticide for plant virus therapy.

Unleashing the potential of nanoparticles on seed treatment and enhancement for sustainable farming

The foremost challenge in farming is the storage of seeds after harvest and maintaining seed quality during storage. In agriculture, studies showed positive impacts of nanotechnology on plant development, seed storage, endurance under various types of stress, detection of seed damages, and seed quality. Seed's response varies with different types of nanoparticles depending on its physical and biochemical properties and plant species. Herein, we aim to cover the impact of nanoparticles on seed coating, dormancy, germination, seedling, nutrition, plant growth, stress conditions protection, and storage. Although the seed treatment by nanopriming has been shown to improve seed germination, seedling development, stress tolerance, and seedling growth, their full potential was not realized at the field level. Sustainable nano-agrochemicals and technology could provide good seed quality with less environmental toxicity. The present review critically discusses eco-friendly strategies that can be employed for the nanomaterial seed treatment and seed enhancement process to increase seedling vigor under different conditions. Also, an integrated approach involving four innovative concepts, namely green co-priming, nano-recycling of agricultural wastes, nano-pairing, and customized nanocontainer storage, has been proposed to acclimatize nanotechnology in farming.

ROS-responsive modified chitosan oligosaccharide nanocapsules for improving pesticide efficiency and intelligent release

BACKGROUND

Some traditional pesticide formulations are inefficient, leading to excessive use and abuse of pesticides, which in turn effects environment. Intelligent release pesticide formulations are ideal for improving pesticide utilization and persistence while reducing environmental pollution.

RESULTS

We designed a benzil-modified chitosan oligosaccharide (CO-BZ) to encapsulate avermectin (Ave). Ave@CO-BZ nanocapsules are prepared based on a simple interfacial method via cross-linking of CO-BZ with diphenylmethane diisocyanate (MDI). The Ave@CO-BZ nanocapsules have an average particle size of 100 nm and exhibited a responsive release performance for ROS. The cumulative release rate of nanocapsules at 24 h with ROS increased by about 11.4% compared to that without ROS. The Ave@CO-BZ nanocapsules displayed good photostability. Ave@CO-BZ nanocapsules can penetrate root-knot nematodes more easily and exhibited better nematicidal activity against root-knot nematodes. The pot experiment showed that the control effect of Ave CS at low concentration was 53.31% at the initial stage of application (15 d), while Ave@CO-BZ nanocapsules was 63.54%. Under the same conditions, the control effect of Ave@CO-BZ nanocapsules on root-knot nematodes was 60.00% after 45 days of application, while Ave EC was only 13.33%. The acute toxicity experiments of earthworms showed that the toxicity of nanocapsules was significantly lower than that of EC.

CONCLUSION

The ROS-responsive nanocapsules can improve the utilization of pesticides and non-target biosafety. This modified chitosan oligosaccharide has great potential as a bio stimuli-responsive material, and this simple and convenient method for preparing Ave@CO-BZ nanocapsules provides a direction for the effective utilization of pesticides. © 2023 Society of Chemical Industry.

Advanced nanopesticides: Advantage and action mechanisms

The use of various chemical substances to control pests, diseases, and weeds in the field is a necessary part of the agricultural development process in every country. While the application of pesticides can improve the quality and yield of crops, plant resistance and the harm caused by pesticide residues to the environment and humans have led to the search for greener and safer pesticide formulations to improve the current situation. In recent years, nanopesticides (NPts) have shown great potential in agriculture due to their high efficiency, low toxicity, targeting, resistance, and controlled slow release demonstrated in the experimental stage. Commonly used approaches to prepare NPts include the use of nanoscale metal materials as active ingredients (AI) (ingredients that can play a role in insecticide, sterilization and weeding) or the construction of carriers based on commonly used pesticides to make them stable in nano-sized form. This paper systematically summarizes the advantages and effects of NPts over conventional pesticides, analyzes the formation and functions of NPts in terms of structure, AI, and additives, and describes the mechanism of action of NPts. Despite the feasibility of NPts use, there is not enough comprehensive research on NPts, which must be supplemented by more experiments in terms of biotoxicology and ecological effects to provide strong support for NPts application.

Eco-Efficient Systems Based on Nanocarriers for the Controlled Release of Fertilizers and Pesticides: Toward Smart Agriculture

The excessive application of pesticides and fertilizers has generated losses in biological diversity, environmental pollution, and harmful effects on human health. Under this context, nanotechnology constitutes an innovative tool to alleviate these problems. Notably, applying nanocarriers as controlled release systems (CRSs) for agrochemicals can overcome the limitations of conventional products. A CRS for agrochemicals is an eco-friendly strategy for the ecosystem and human health. Nanopesticides based on synthetic and natural polymers, nanoemulsions, lipid nanoparticles, and nanofibers reduce phytopathogens and plant diseases. Nanoproducts designed with an environmentally responsive, controlled release offer great potential to create formulations that respond to specific environmental stimuli. The formulation of nanofertilizers is focused on enhancing the action of nutrients and growth stimulators, which show an improved nutrient release with site-specific action using nanohydroxyapatite, nanoclays, chitosan nanoparticles, mesoporous silica nanoparticles, and amorphous calcium phosphate. However, despite the noticeable results for nanopesticides and nanofertilizers, research still needs to be improved. Here, we review the relevant antecedents in this topic and discuss limitations and future challenges.

Nano-based smart formulations: A potential solution to the hazardous effects of pesticide on the environment

Inefficient usage, overdose, and post-application losses of conventional pesticides have resulted in severe ecological and environmental issues, such as pesticide resistance, environmental contamination, and soil degradation. Advances in nano-based smart formulations are promising novel methods to decrease the hazardous impacts of pesticide on the environment. In light of the lack of a systematic and critical summary of these aspects, this work has been structured to critically assess the roles and specific mechanisms of smart nanoformulations (NFs) in mitigating the adverse impacts of pesticide on the environment, along with an evaluation of their final environmental fate, safety, and application prospects. Our study provides a novel perspective for a better understanding of the potential functions of smart NFs in reducing environmental pollution. Additionally, this study offers meaningful information for the safe and effective use of these nanoproducts in field applications in the near future.

Recent Advances in Nano-Enabled Seed Treatment Strategies for Sustainable Agriculture: Challenges, Risk Assessment, and Future Perspectives

Agro seeds are vulnerable to environmental stressors, adversely affecting seed vigor, crop growth, and crop productivity. Different agrochemical-based seed treatments enhance seed germination, but they can also cause damage to the environment; therefore, sustainable technologies such as nano-based agrochemicals are urgently needed. Nanoagrochemicals can reduce the dose-dependent toxicity of seed treatment, thereby improving seed viability and ensuring the controlled release of nanoagrochemical active ingredients However, the applications of nanoagrochemicals to plants in the field raise concerns about nanomaterial safety, exposure levels, and toxicological implications to the environment and human health. In the present comprehensive review, the development, scope, challenges, and risk assessments of nanoagrochemicals on seed treatment are discussed. Moreover, the implementation obstacles for nanoagrochemicals use in seed treatments, their commercialization potential, and the need for policy regulations to assess possible risks are also discussed. Based on our knowledge, this is the first time that we have presented legendary literature to readers in order to help them gain a deeper understanding of upcoming nanotechnologies that may enable the development of future generation seed treatment agrochemical formulations, their scope, and potential risks associated with seed treatment.

pH-responsive λ-cyhalothrin nanopesticides for effective pest control and reduced toxicity to Harmonia axyridis

In this study, pH-responsive LC@O-CMCS/PU nanoparticles were prepared by encapsulating λ-cyhalothrin (LC) with O-carboxymethyl chitosan (O-CMCS) to form LC/O-CMCS and then covering it with polyurethane (PU). Characterization and performance test results demonstrate that LC@O-CMCS/PU had good alkaline release properties and pesticide loading performance. Compared to commercial formulations containing large amounts of emulsifiers (e.g., emulsifiable concentrate, EC), LC@O-CMCS/PU showed better leaf-surface adhesion. On the dried pesticide-applied surfaces, the acute contact toxicity of LC@O-CMCS/PU to Harmonia axyridis (H. axyridis) was nearly 20 times lower than that of LC EC. Due to the slow-releasing property of LC@O-CMCS/PU, only 16.38 % of LC was released at 48 h in dew and effectively reduced the toxicity of dew. On the pesticide-applied leaves with dew, exposure to the LC (EC) caused 86.66 % mortality of H. axyridis larvae significantly higher than the LC@O-CMCS/PU, which was only 16.66 % lethality. Additionally, quantitative analysis demonstrated 11.33 mg/kg of λ-cyhalothrin in the dew on LC@O-CMCS/PU lower than LC (EC) with 4.54 mg/kg. In summary, LC@O-CMCS/PU effectively improves the safety of λ-cyhalothrin to H. axyridis and has great potential to be used in pest control combining natural enemies and chemical pesticides.

Organosilica-based deformable nanopesticides with enhanced insecticidal activity prepared by flash nanoprecipitation

A flash nanoprecipitation technique was developed for the construction of a novel type of deformable hollow organosilica nanoparticle for pesticide delivery.

Dual photo-controlled release system for fipronil and dinotefuran

Development of controlled release system promises a huge impact on the pesticide delivery, which has raised attentions in improving efficacy of pesticides. Herein, the emerging photoremovable protecting group (PRPG), used in spatiotemporal delivery of drug by light, was introduced into agriculture. We obtained three TNB-insecticides and two of them exhibited excellent photophysicochemical properties. Our dual photo-controlled release system displayed more than sixfold insecticidal activity differences upon irradiation with UV light or sunlight. The dual release of DIN-TNB-DIN showed synergistic effect on mosquito larvae and armyworm larvae. Distribution of the fluorescence in body of dead/alive wigglers clearly illustrated the action mode, and visually demonstrated the precise and spatiotemporal delivery of insecticides in the living mosquito larvae. The new developed dual photo-controlled release system might widen the diversity in pesticide delivery, promoting the development in improving pesticide efficacy.

Advances in stimuli-responsive systems for pesticides delivery: Recent efforts and future outlook

Effective pest management for enhanced crop output is one of the primary goals of establishing sustainable agricultural practices in the world. Pesticides are critical in preventing biological disasters, ensuring crop productivity, and fostering sustainable agricultural production growth. Studies showed that crops are unable to properly utilize pesticides because of several limiting factors, such as leaching and bioconversion, thereby damaging ecosystems and human health. In recent years, stimuli-responsive systems for pesticides delivery (SRSP) by nanotechnology demonstrated excellent promise in enhancing the effectiveness and safety of pesticides. SRSP are being developed with the goal of delivering precise amounts of active substances in response to biological needs and environmental factors. An in-depth analysis of carrier materials, design fundamentals, and classification of SRSP were provided. The adhesion of SRSP to crop tissue, absorption, translocation in and within plants, mobility in the soil, and toxicity were also discussed. The problems and shortcomings that need be resolved to accelerate the actual deployment of SRSP were highlighted in this review.

Construction and Characterization of Novel Hydrophilic Nanospheres Loaded with Lambda-Cyhalothrin via Ultrasonic Emulsification-Solvent Evaporation

Safe and efficient pesticide formulations have attracted great attention for the prevention and control of diseases and pests. In recent years, improving the effectiveness and duration of pesticides through nanotechnology has become a research hotspot in the field of pesticide formulations. Here, we develop a novel hydrophilic lambda-cyhalothrin nanospheres encapsulated with poly(styrene-co-maleic anhydride) (PSMA) via the ultrasonic emulsification-solvent evaporation method, which exhibited better particle size uniformity and dispersion in comparison with the traditional method. The effects of PSMA content, oil phase/water phase ratio and phacoemulsification time on the particle size and morphology of nanoparticles were investigated to optimize preparation process parameters. Meanwhile, the wettability and adhesion behavior on the leaf surface, the release properties, and the storage stability of nanoparticles were characterized to evaluate the performance of the novel nano-formulation. This work not only establishes a facile and promising method for the applicable of insoluble pesticides, but also develops an innovative nano-formulation with hydrophilicity and high leaf adhesion, which opens a new direction in plant protection and residue reduction.

Novel Approaches for Sustainable Horticultural Crop Production: Advances and Prospects

Reduction of plant growth, yield and quality due to diverse environmental constrains along with climate change significantly limit the sustainable production of horticultural crops. In this review, we highlight the prospective impacts that are positive challenges for the application of beneficial microbial endophytes, nanomaterials (NMs), exogenous phytohormones strigolactones (SLs) and new breeding techniques (CRISPR), as well as controlled environment horticulture (CEH) using artificial light in sustainable production of horticultural crops. The benefits of such applications are often evaluated by measuring their impact on the metabolic, morphological and biochemical parameters of a variety of cultures, which typically results in higher yields with efficient use of resources when applied in greenhouse or field conditions. Endophytic microbes that promote plant growth play a key role in the adapting of plants to habitat, thereby improving their yield and prolonging their protection from biotic and abiotic stresses. Focusing on quality control, we considered the effects of the applications of microbial endophytes, a novel class of phytohormones SLs, as well as NMs and CEH using artificial light on horticultural commodities. In addition, the genomic editing of plants using CRISPR, including its role in modulating gene expression/transcription factors in improving crop production and tolerance, was also reviewed.

pH-responsive release and washout resistance of chitosan-based nano-pesticides for sustainable control of plumeria rust

Controlled pesticide release in response to environmental stimuli by encapsulating pesticides in a carrier is a feasible approach to improve the effective utilization rate. In this study, pH-responsive release nanoparticles loaded with penconazole (PE) were prepared by ionic cross-linking of chitosan and carboxymethyl chitosan (PE@CS/CMCS-NPs). PE@CS/CMCS-NPs exhibited good washout resistance and wettability properties, increasing the washing resistance of the pesticide by approximately 20 times under continuous washing. The results of the release experiments showed that nanoparticles had adjustable controlled-release characteristics with the change in pH based on the swelling of nanoparticles. The results of spore germination experiments showed that PE@CS/CMCS-NPs enhanced the inhibitory effect under acidic conditions. The field experiment results showed that PE@CS/CMCS-NPs had a better control effect than PE-aqueous solution, extended the duration and slowed down the dissipation of PE. These results indicated that the CS/CMCS-NPs pH-responsive release system has great potential in the development of an effective pesticide formulation.

Environmentally Friendly Zr-Based MOF for Pesticide Delivery: Ultrahigh Loading Capacity, pH-Responsive Release, Improved Leaf Affinity, and Enhanced Antipest Activity

The stimuli responsive pesticide delivery system (PDS) has drawn increasing attention in recent years, a system which can effectively improve the utilization of pesticides. In the current research, we report a pH responsive PDS by using carboxymethyl cellulose (CMC) modified Zr-based metal organic frameworks (UiO-66-NH₂) as the nanocarrier for acetamiprid (ATP). UiO-66-NH₂-CMC possesses a large surface area and abundant pores, which can effectively load ATP, and the loading rate is as high as 90.79%. Compared with free ATP, the ATP@UiO-66-NH₂-CMC nanopesticide exhibits pH responsive controlled release behavior, and the pesticide can sustained release to the medium. In addition, it also shows improved leaf affinity, which makes it easier to wet the leaf surface and improve the utilization of pesticide. Therefore, ATP@UiO-66-NH₂-CMC displays better antipest activity against aphids than free ATP does. Meanwhile, ATP@UiO-66-NH₂-CMC shows no negative effects on the germination and growth of maize, showing good biosafety. Moreover, the ATP@UiO-66-NH₂-CMC nanopesticide does not contain any toxic organic solvents or additives. Therefore, we hope that it can be a suitable candidate for plant protection and sustainable agriculture.

Matrine@chitosan-D-proline nanocapsules as antifouling agents with antibacterial properties and biofilm dispersibility in the marine environment

Antifoulants are the most vital substances in antifouling coatings to prevent marine organisms from colonizing the undersea substrate surfaces. In addition to antibacterial performance, inhibition of biofilm formation is an important criterion for antifouling coatings. In this study, we synthesized pH-responsive matrine@chitosan-D-proline (Mat@CS-Pro) nanocapsules of about 280 nm with antibacterial properties and biofilm dispersibility. The prepared Mat@CS-Pro nanocapsules exhibited high-level antibacterial properties, reaching about 93, 88, and 96% for E. coli, S. aureus, and P. aeruginosa, respectively. Such nanocapsules can cause irreversible damage to bacteria and cause them to lose their intact cell structures. Moreover, Mat@CS-Pro nanocapsules also possessed outstanding dispersal biofilm performances, in which the biofilm thickness of E. coli, S. aureus, and P. aeruginosa was decreased by 33, 74, and 42%, respectively, after 3 days of incubation. Besides, the Mat@CS-Pro nanocapsules had remarkable pH-responsive properties. As the environmental pH became acidic, the nanocapsules swelled to about 475 nm and the released concentration could reach 28.5 ppm after immersion for 10 h but maintained a low releasing rate in pH 8 conditions.

Chitosan-based organic/inorganic composite engineered for UV light-controlled smart pH-responsive pesticide through in situ photo-induced generation of acid

BACKGROUND

Confined by the volatile property, pesticides are overused and lost significantly during and after spraying, weakening the ecological microbalance among different species of lives. Acid-responsive pesticide is a type of smartly engineered pesticides that contribute to the improvement of utilization efficiency of pesticidal active ingredients in acid-controlled manner, whilst the implementation of acidic solutions may disturb the balance of microenvironment surrounding targeted plants or cause secondary pollution, underscoring the input of acid in a more precise strategy.

RESULTS

Chitosan was chemically modified with a photoacid generator (2-nitrobenzaldehyde) serving as a light-maneuvered acid self-supplier, based on which a smart pesticide was formulated by the integration of attapulgite and organophosphate insecticide chlorpyrifos. Under the irradiation of UV light (365 nm), the modified chitosan would undergo a photolytic reaction to generate an acid and pristine chitosan, which seized the labile protons and facilitated the release of chlorpyrifos based on its inherent pH-responsive flexibility. According to the pesticide release performance, the release rate of chlorpyrifos under UV light (27.2 mW/cm² ) reached 78%, significantly higher than those under sunlight (22%, 4.2 mW/cm² ) and in the dark (20%) within the same time, consistent with the pH reduction to 5.3 under UV light and no obvious pH change for the two other situations, exhibiting an attractive UV light-controlled, acid-propelled release behavior.

CONCLUSION

Compared to direct acid spray approach, the proposed in situ photo-induced generation of acid locally on the spots of applied pesticide circumvents the problem of acid contamination to nontargets, demonstrating higher efficiency and biocompatibility for the controlled delivery of acid-responsive pesticides and pest management. © 2022 Society of Chemical Industry.

Repurposing of Marine Raw Materials in the Formulation of Innovative Plant Protection Products

Over the years, the growth of the world population has caused a huge agricultural production to support the population's needs. Since plant protection products are essential to preserve agricultural crops and to optimize vital plant processes, it is crucial to use more sustainable, biodegradable, and biocompatible raw materials, without harming the environment and human health. Although the development of new plant protection products is a costly process, the environmental benefits should be considered. In this context, marine raw materials obtained as byproducts of fishing industries, possessing a wide variety of physicochemical and biological properties, can serve as a promising source of such materials. They have a high potential for developing alternative and safe formulations for agricultural applications, not only as biocompatible excipients but also as effective and selective, or even both. It is also possible to promote a synergistic effect between an active substance and the biological activity of the marine polymer used in the formulation, enabling plant protection products with lower concentrations of the active substances. Thus, this review addresses the repurposing of marine raw materials for the development of innovative plant protection products, focusing on micro- and nanoparticulate formulations, to protect the environment through more ecological and sustainable strategies.

Nanomaterials and nanotechnology for the delivery of agrochemicals: strategies towards sustainable agriculture

Nanomaterials (NMs) have received considerable attention in the field of agrochemicals due to their special properties, such as small particle size, surface structure, solubility and chemical composition. The application of NMs and nanotechnology in agrochemicals dramatically overcomes the defects of conventional agrochemicals, including low bioavailability, easy photolysis, and organic solvent pollution, etc. In this review, we describe advances in the application of NMs in chemical pesticides and fertilizers, which are the two earliest and most researched areas of NMs in agrochemicals. Besides, this article concerns with the new applications of NMs in other agrochemicals, such as bio-pesticides, nucleic acid pesticides, plant growth regulators (PGRs), and pheromone. We also discuss challenges and the industrialization trend of NMs in the field of agrochemicals. Constructing nano-agrochemical delivery system via NMs and nanotechnology facilitates the improvement of the stability and dispersion of active ingredients, promotes the precise delivery of agrochemicals, reduces residual pollution and decreases labor cost in different application scenarios, which is potential to maintain the sustainability of agricultural systems and improve food security by increasing the efficacy of agricultural inputs.

Basic Amino Acid-Modified Lignin-Based Biomass Adjuvants: Synthesis, Emulsifying Activity, Ultraviolet Protection, and Controlled Release of Avermectin

Avermectin (AVM) is a highly effective and safe biopesticide but is very sensitive to ultraviolet (UV) light and exhibits poor water solubility. Developing green and multifunctional adjuvants is important for the protection and controlled release of AVM. In this work, a number of water-soluble enzymatic hydrolysis lignins (W-EHLs) were prepared via grafting basic amino acids and used as emulsifiers with co-surfactants to prepare high-internal phase emulsions (HIPEs). The results showed that W-EHLs with co-surfactants could be prepared with HIPEs that contained 90 vol % green oil phases such as turpentine, and the stability of the HIPEs first increased and then decreased when the rate of grafting of basic amino acids on lignin increased from 0.26 to 1.46 mmol/g. The more polar oil droplets were less deformable due to their higher viscosity, thereby affording a stability advantage to HIPEs. Subsequently, the relations between the stability and interfacial viscoelasticity of the emulsion were effectively correlated by interfacial rheology, droplet size, and physical stability tests. The results showed that HIPEs with smaller droplets had poor fluidity and strong interfacial viscoelasticity due to their higher droplet packing density, which resulted in good macroscopic stability. Like the AVM carrier, the retention rate of AVM in HIPEs was 80.1% after UV radiation for 72 h, which represented the highest UV protection efficiency in AVM delivery systems. The release curves showed that the rate of release of AVM from HIPEs was adjusted by controlling the pH value of the medium. In addition, the release of HIPEs is completely in accord with both diffusion and the matrix erosion mechanism. The strategy could be extended to other sensitive pesticides and used to promote the development of sustainable agriculture.