A lateral flow strip for on-site detection of tobramycin based on dual-functional platinum-decorated gold nanoparticles

Electrochemical aptamer sensor based on AgNPs@PDANSs and "sandwich" structure guidance for the detection of tobramycin in water samples

In this study, an ultrasensitive detection platform for tobramycin (TOB) was developed, featuring a "sandwich" structure guided by AgNCs@PDANSs and Thi-AuNCs@ZnONSs. To address the issue of large background current peak signals in tagless sensors, Thi-AuNCs@ZnONSs composites were synthesized as signal tags. Zinc oxide nanosheets (ZnONSs) served as the loading agent, and AuNCs with the electroactive molecule Thi acted as carriers. Furthermore, AgNPs@PDANSs nanocomposites, possessing excellent electrical conductivity and large specific surface areas, were prepared as substrate materials for the modified electrodes. A "sandwich" structure strategy was also introduced to enhance the accuracy of the electrochemical aptasensor. This strategy, utilizing a dual sequence for target labeling and capture, yielded higher sensitivity and simplified the sensor construction compared to methods employing a single sequence. Under optimal conditions, the detection limit for TOB was established at 1.41 pM, with a detection range of 0.05-5000 nM. The aptasensor was effectively applied in the detection of TOB in tap and lake water, demonstrating outstanding reproducibility, selectivity, and stability. These results may serve as a reference for environmental TOB detection.

A comprehensive review of aptamer screening and application for lateral flow strip: Current status and future perspectives

The detection of biomarkers is of great significance for medical diagnosis, food safety, environmental monitoring, and agriculture. However, bio-detection technology at present often necessitates complex instruments, expensive reagents, specialized expertise, and prolonged procedures, making it challenging to fulfill the demand for rapid, sensitive, user-friendly, and economical testing. In contrast, lateral flow strip (LFS) technology offers simple, fast, and visually accessible detection modality, allowing real-time analysis of clinical specimens, thus finding widespread utility across various domains. Within the realm of LFS, the application of aptamers as molecular recognition probes presents distinct advantages over antibodies, including cost-effectiveness, smaller size, ease of synthesis, and chemical stability. In recent years, aptamer-based LFS has found extensive application in qualitative, semi-quantitative, and quantitative detection across food safety, environmental surveillance, clinical diagnostics, and other domains. This review provided a concise overview of different aptamer screening methodologies, selection strategies, underlying principles, and procedural, elucidating their respective advantages, limitations, and applications. Additionally, we summarized recent strategies and mechanisms for aptamer-based LFS, such as the sandwich and competitive methods. Furthermore, we classified LFSs constructed based on aptamers, considering the rapid advancements in this area, and discussed their applications in biological and chemical detection. Finally, we delved into the current challenges and future directions in the development of aptamer and aptamer-based LFS. Although this review was not thoroughly, it would serve as a valuable reference for understanding the research progress of aptamer-based LFS and aid in the development of new types of aptasensors.

Lateral flow assay for simultaneous detection of multiple mycotoxins using nanozyme to amplify signals

Co-contamination of multiple mycotoxins produces synergistic toxic effects, leading to more serious hazards. Therefore, the simple, rapid and accurate simultaneous detection of multiple mycotoxins is crucial. Herein, a three-channel aptamer-based lateral flow assay (Apt-LFA) was established for the detection of aflatoxin M1 (AFM1), aflatoxin B1 (AFB1) and ochratoxin A (OTA). The multi-channel Apt-LFA utilized gold‑iridium nanozyme to catalyze the chromogenic substrate, which effectively achieved signal amplification. Moreover, the positions and lengths of the complementary sequences were screened by changes in fluorescence intensity. After grayscale analysis, the semi-quantitative results showed that the detection limits of AFM1, AFB1 and OTA were 0.39 ng/mL, 0.36 ng/mL and 0.82 ng/mL. The recoveries of the multiplexed competitive sensors in complex matrices of real samples were 93.33%-97.01%, 95.72%-102.67%, and 106.88%-109.33%, respectively. In conclusion, the assembly principle of the three-channel Apt-LFA is simple, which can provide a new idea for the simultaneous detection of small molecule targets.

Aptamer-modified paper-based analytical devices for the detection of food hazards: Emerging applications and future perspective

Food analysis plays a critical role in assessing human health risks and monitoring food quality and safety. Currently, there is a pressing need for a reliable, portable, and quick recognition element for point-of-care testing (POCT) to better serve the demands of on-site food analysis. Aptamer-modified paper-based analytical devices (Apt-PADs) have excellent characteristics of high portability, high sensitivity, high specificity, and on-site detection, which have been widely used and concerned in the field of food safety. The article reviews the basic components and working principles of Apt-PADs, and introduces their representative applications detecting food hazards. Finally, the advantages, challenges, and future directions of Apt-PADs-based sensing performance are discussed, to provide new directions and insights for researchers to select appropriate Apt-PADs according to specific applications.

A lateral flow assay for miRNA-21 based on CRISPR/Cas13a and MnO2 nanosheets-mediated recognition and signal amplification

The point-of-care testing (POCT) of miRNA has significant application in medical diagnosis, yet presents challenges due to their characteristics of high homology, low abundance, and short length, which hinders the achievement of quick detection with high specificity and sensitivity. In this study, a lateral flow assay based on the CRISPR/Cas13a system and MnO2 nanozyme was developed for highly sensitive detection of microRNA-21 (miR-21). The CRISPR/Cas13a cleavage system exhibits the ability to recognize the specific oligonucleotide sequence, where two-base mismatches significantly impact the cleavage activity of the Cas13a. Upon binding of the target to crRNA, the cleavage activity of Cas13a is activated, resulting in the unlocking of the sequence and initiating strand displacement, thereby enabling signal amplification to produce a new sequence P1. When applying the reaction solution to the lateral flow test strip, P1 mediates the capture of MnO2 nanosheets (MnO2 NSs) on the T zone, which catalyzes the oxidation of the pre-immobilized colorless substrate 3,3',5,5'-tetramethylbenzidine (TMB) on the T zone and generates the blue-green product (ox-TMB). The change in gray value is directly proportional to the concentration of miR-21, allowing for qualitative detection through visual inspection and quantitative measurement using ImageJ software. This method achieves the detection of miR-21 within a rapid 10-min timeframe, and the limit of detection (LOD) is 0.33 pM. With the advantages of high specificity, simplicity, and sensitivity, the lateral flow test strip and the design strategy hold great potential for the early diagnosis of related diseases.

A lateral flow strip for on-site detection of homocysteine based on a truncated aptamer

An elevated level of homocysteine (Hcy) in serum is closely related to the development of various diseases. Therefore, homocysteine has been widely employed as a biomarker in medical diagnosis and the on-site detection of homocysteine is highly desired. In this study, a truncated highly specific aptamer for homocysteine was screened and used to design a lateral flow strip (LFS) for the detection of homocysteine. The aptamer was derived from a previously reported sequence. Based on the result of molecular docking, the original sequence was subjected to truncation, resulting in a reduction of the length from 66 nt to 55 nt. Based on the truncated aptamer, the LFS was designed for the detection of homocysteine. In the presence of homocysteine, the aptamer selectively binds to it, releasing cDNA from the aptamer/cDNA duplex. This allows cDNA to bind to the capture probe immobilized on the T zone of the strip, resulting in a red signal on the T zone from gold nanoparticles (AuNPs). The strip enables the visual detection of homocysteine in 5 min. Quantitative detection can be facilitated with the aid of ImageJ software. In this mode, the linear detection range for homocysteine is within 5-50 μM, with a detection limit of 4.18 μM. The strip has been effectively utilized for the detection of homocysteine in human serum. Consequently, the combination of the truncated aptamer and the strip offers a method that is sensitive, quick, and economical for the on-site detection of homocysteine.

A dual-cycle amplification-based electrochemical platform for sensitive detection of tobramycin

BACKGROUND

Tobramycin (TOB), an essential aminoglycoside antibiotic in human life, poses potential threats due to its residues in the environment. The primary concern is the adverse impact of excessive TOB on human kidneys, hearing, and other organs, significantly affecting human health. Constructing a sensitive electrochemical platform for simple and rapid trace detection is crucial. Herein, to enhance the sensitivity of TOB detection in the environment and mitigate the risks associated with residual antibiotics, an ultrasensitive electrochemical aptasensor was developed.

RESULTS

The sensor employs a dual-cycle amplification strategy involving catalytic hairpin assembly (CHA) and exonuclease III (Exo III) for efficient signal amplification. Simultaneously, the electrode performance was optimized by incorporating gold nanowires (AuNWs) onto the surface of reduced graphene oxide (PDA-rGO). Specifically, in the presence of TOB, which binds to the aptamer (Apt), dsDNA dissociates, releasing cDNA to open hairpin 1 (HP1) and initiate the CHA cycle with the participation of hairpin 2 (HP2). Exo III shears HP1 in the HP1/HP2 complex, freeing HP2 to participate in the CHA cycle again. Ultimately, a significant amount of signal label is retained on the electrode by hybridizing with sheared HP1, generating a robust electrical signal.

SIGNIFICANCE

Through the signal amplification strategy, the aptasensor design provides a broad linear range of 0.005-500 nM, with a low detection limit of 0.112 pM for TOB. It is worth mentioning that the aptasensor displayed favorable stability, specificity, and reproducibility, and has been successfully applied to practical samples, demonstrating its utility in practical applications.

Tuning the plasmonic and catalytic signals of Au@Pt nanoparticles for dual-mode biosensing

Dual-mode biosensors have gained great attention due to their excellent detection accuracy provided by the mutual verification of output signals. However, current strategies for dual-mode sensing mainly rely on a signal probe exhibiting dual properties that may encounter unreliability. Herein, we report a dual-mode biosensing strategy by modulating the plasmonic and catalytic activities of nanoparticles through a surface growing approach. Ascorbic acid enables the growing of Au shell on Au@Pt NPs to tune both their peroxidase-like activity and plasmonic signal. Enzyme-catalyzed reactions can generate ascorbic acid to modulate the plasmonic and catalytic activities of nanoparticles. Combined with enzyme-linked immunosorbent assay, it enables dual-mode immunoassays of carbofuran with both a colorimetric readout by a spectrometer down to 0.1 ppb and a naked-eye readout of 5 ppb. This dual-mode biosensing technique advantages in tunable sensitivity and robustness, holding promise as an analytical platform for biomedical diagnosis and food safety.

Post-Assay Chemical Enhancement for Highly Sensitive Lateral Flow Immunoassays: A Critical Review

Lateral flow immunoassay (LFIA) has found a broad application for testing in point-of-care (POC) settings. LFIA is performed using test strips-fully integrated multimembrane assemblies containing all reagents for assay performance. Migration of liquid sample along the test strip initiates the formation of labeled immunocomplexes, which are detected visually or instrumentally. The tradeoff of LFIA's rapidity and user-friendliness is its relatively low sensitivity (high limit of detection), which restricts its applicability for detecting low-abundant targets. An increase in LFIA's sensitivity has attracted many efforts and is often considered one of the primary directions in developing immunochemical POC assays. Post-assay enhancements based on chemical reactions facilitate high sensitivity. In this critical review, we explain the performance of post-assay chemical enhancements, discuss their advantages, limitations, compared limit of detection (LOD) improvements, and required time for the enhancement procedures. We raise concerns about the performance of enhanced LFIA and discuss the bottlenecks in the existing experiments. Finally, we suggest the experimental workflow for step-by-step development and validation of enhanced LFIA. This review summarizes the state-of-art of LFIA with chemical enhancement, offers ways to overcome existing limitations, and discusses future outlooks for highly sensitive testing in POC conditions.

Recent Advances in Nanozyme-Mediated Strategies for Pathogen Detection and Control

Pathogen detection and control have long presented formidable challenges in the domains of medicine and public health. This review paper underscores the potential of nanozymes as emerging bio-mimetic enzymes that hold promise in effectively tackling these challenges. The key features and advantages of nanozymes are introduced, encompassing their comparable catalytic activity to natural enzymes, enhanced stability and reliability, cost effectiveness, and straightforward preparation methods. Subsequently, the paper delves into the detailed utilization of nanozymes for pathogen detection. This includes their application as biosensors, facilitating rapid and sensitive identification of diverse pathogens, including bacteria, viruses, and plasmodium. Furthermore, the paper explores strategies employing nanozymes for pathogen control, such as the regulation of reactive oxygen species (ROS), HOBr/Cl regulation, and clearance of extracellular DNA to impede pathogen growth and transmission. The review underscores the vast potential of nanozymes in pathogen detection and control through numerous specific examples and case studies. The authors highlight the efficiency, rapidity, and specificity of pathogen detection achieved with nanozymes, employing various strategies. They also demonstrate the feasibility of nanozymes in hindering pathogen growth and transmission. These innovative approaches employing nanozymes are projected to provide novel options for early disease diagnoses, treatment, and prevention. Through a comprehensive discourse on the characteristics and advantages of nanozymes, as well as diverse application approaches, this paper serves as a crucial reference and guide for further research and development in nanozyme technology. The expectation is that such advancements will significantly contribute to enhancing disease control measures and improving public health outcomes.

A multi-line platinum nanozyme-based lateral flow device for the colorimetric evaluation of total antioxidant capacity in different matrices

The evaluation of Total Antioxidant Capacity (TAC), namely the complete pattern of antioxidant species in a complex medium, is of major interest in many fields ranging from health monitoring to quality control in the food industry. In this framework, point-of-care (POC) testing technologies are a promising diagnostic solution for rapid on-site analyses, unlike laboratory based-assays, which are often limited by centralized analyses, time-consuming and costly procedures, and invasiveness in the case of health diagnostics. In this work, we developed a POC methodology that evaluates TAC in different matrices, exploiting the peroxidase-like properties of 5 nm platinum nanoparticles (PtNPs), combined with a colorimetric paper-based device. Notably, we designed and optimized a multi-line PtNPs-based Lateral Flow Assay (LFA), which relies on three sequential test lines with increasing concentrations of platinum nanozymes, to get a non-invasive, accurate, and fast (10 minutes) colorimetric evaluation of the body TAC in saliva samples. Furthermore, we employed the device as a prototype of a quality control tool in the food industry, for the determination of the TAC in fruit juices.

Bimetallic silver-platinum (AgPt) nanoparticles and chitosan fabricated cotton gauze for enhanced antimicrobial and wound healing applications

Wound healing is a significant clinical and socioeconomic problem that is often affected by microbial infection. Inappropriate monitoring leads to unfavorable concerns for surrounding tissues. Cotton gauzes have been used as low-cost wound dressing material but prolong healing owing to strong adherence and secondary microbial infections. Hence, we prepared the bimetallic (silver and platinum) nanoparticles (AgPt NPs) using citric acid (CA) as a reducing agent and then coated them on chitosan (CS) fabricated cotton gauze (CG) for enhanced antimicrobial and wound healing applications. The synthesis of AgPt NPs was evidenced UV-Visible spectroscopy, FE-TEM, and elemental mapping analysis. The average size of AgPt NPs was 21.48 ± 6.32 nm and spherical in structure. Besides, AgPt NPs showed a hydrodynamic size of 63.64 (d.nm) with a polydispersity index of 0.220 and a zeta potential of -28.1 mV. The FT-IR and XRD analysis demonstrated the functional changes and crystalline properties of AgPt NPs. The antimicrobial efficacy of AgPt NPs was significantly higher than standard antibiotic against bacteria, yeast, and filamentous fungi. Furthermore, the AgPt NPs-CS/CG exhibited a substantial hydrophobic nature with better antimicrobial and antioxidant activity. In addition, pH-dependent Ag and Pt release from the AgPt NPs-CS/CG was determined by ICP-MS analysis. The treatment of AgPt NPs-CS/CG augmented the in vitro wound healing in mouse embryonic fibroblast cells (NIH3T3). Hence, we concluded that AgPt NPs-CS/CG could be used to enhance antimicrobial and wound healing applications.

An Improved Immunochromatographic Strip Based on Plant-Derived E2 for Detection of Antibodies against Classical Swine Fever Virus

Vaccination is an effective method to control the spread of classical swine fever virus (CSFV), which is a major cause of economic losses to the swine industry. Although serological detection assays are commonly used to assess immune status, current methods for monitoring of antibodies (Abs) are time-consuming, expensive, and require cell culture and virus manipulation. To address these problems, the E2 protein of CSFV was expressed in transgenic rice seeds as a labeled antigen for the development of an immunochromatographic test strip (ICTS) for rapid, precise, and cost-effective detection of Abs. The ICTS has a reasonable sensitivity of 1:128,000 for detection of serum Abs against CSFV and no cross-reactivity with Abs of other porcine viruses. The similarity of the results between the proposed ICTS and a commercial enzyme-linked immunosorbent assay was 94.1% (128/136) for detection of serum Abs from immunized animals and 92.3% (72/78) for detection of maternally derived Abs. The proposed assay was successfully used to monitor Abs against E2 of both pigs and rabbits immunized with a live attenuated vaccine or an E2 subunit vaccine. The results confirmed that the ICTS can be applied to detect Ab levels in animals with different immunological backgrounds. The ICTS based on plant-derived E2 is a relatively inexpensive, rapid, and accurate assay for detection of Abs against CSFV and avoids the risk of contamination by animal products. IMPORTANCE The E2 protein of classical swine fever virus (CSFV) was expressed in transgenic rice endosperms as a diagnostic antigen for use with a rapid colloidal gold assay for the detection of antibodies (Abs) against CSFV. This improved test was used to monitor Abs against the E2 protein in both pigs and rabbits immunized with a live attenuated vaccine or E2 subunit vaccine. The assay successfully detected Ab levels in serum samples from piglets with different immunological backgrounds. In contrast to current E2 protein-based diagnostic methods using Escherichia coli or insect cells as expression systems, plant-derived E2 avoids the limitations of low immunogenicity of eukaryotic expression systems and potential contamination of fetal bovine serum with bovine viral diarrhea virus in cell culture.

Sensitive determination of tobramycin using homocystine capped gold nanoclusters as probe by second-order scattering

A novel photoluminescent Hcy-AuNCs has been developed through one-pot reduction method, to establish a tobramycin sensing by second-order scattering (SOS). Hcy-AuNCs could spontaneously assemble to small-scaled aggregation, resulting in remarkable intensity enhancement of scattered luminescence signals. The luminescence of Hcy-AuNCs could be clearly observed under ultraviolet lamp, when excited at 365 nm, a significant luminescent intensity at 741 nm was monitored in SOS spectra. The introduction of AuNPs would cause large-scaled aggregation of Hcy-AuNCs that was rapidly settled in the solution, resulting in the decrease of SOS intensity. Besides, the non-radiative energy transfer between AuNPs and Hcy-AuNCs would also reduce the luminescent intensity. However, the addition of tobramycin would cause the aggregation of AuNPs due to the electrostatic and covalent bonding between AuNPs and tobramycin, thus eliminating the interference of AuNPs. The luminescence of Hcy-AuNCs reappeared, exhibiting an optical response toward tobramycin. The good linearity was obtained in a wide range from 4 nM to 300 nM with a low detection limit of 0.27 nM. The selectivity was acceptable toward different types of antibiotics. Finally, the proposed method was successfully applied to the widely used tobramycin eye drops.

A Competitive Assay Based on Dual-Mode Au@Pt-DNA Biosensors for On-Site Sensitive Determination of Carbendazim Fungicide in Agricultural Products

Carbendazim (CBZ), a systemic, broad-spectrum benzimidazole fungicide, is widely used to control fungal diseases in agricultural products. Its residues might pose risks to human health and the environment. Therefore, it is warranted to establish a rapid and reliable method for its residual quantification. Herein, we proposed a competitive assay that combined aptamer (DNA) specific recognition and bimetallic nanozyme gold@platinum (Au@Pt) catalysis to trace the CBZ residue. The DNA was labeled onto bimetallic nanozyme Au@Pt surface to produce Au@Pt probes (Au@Pt-DNA). The magnetic Fe₃O₄ was functionalized with a complementary strand of DNA (C-DNA) to form Fe₃O₄ probes (Fe₃O₄-C-DNA). Subsequently, the CBZ and the Fe₃O₄ probes competitively react with Au@Pt probes to form two Au@Pt-DNA biosensors (Au@Pt-ssDNA-CBZ and Au@Pt-dsDNA-Fe₃O₄). The Au@Pt-ssDNA-CBZ biosensor was designed for qualitative analysis through a naked-eye visualization strategy in the presence of CBZ. Meanwhile, Au@Pt-dsDNA-Fe₃O₄ biosensor was developed to quantitatively analyze CBZ using a multifunctional microplate reader. A competitive assay based on the dual-mode Au@Pt-DNA biosensors was established for onsite sensitive determination of CBZ. The limit of detection (LOD) and recoveries of the developed assay were 0.038 ng/mg and 71.88-110.11%, with relative standard deviations (RSDs) ranging between 3.15 and 10.91%. The assay demonstrated a good correlation with data acquired from liquid chromatography coupled with mass spectrometry/mass spectrometry analysis. In summary, the proposed competitive assay based on dual-mode Au@Pt-DNA biosensors might have a great potential for onsite sensitive detection of pesticides in agro-products.