A two fluorescent signal indicator-based ratio fluorometric alkaline phosphatase assay based on one signal precursor

Three-dimensional DNA biomimetic networks (B-3D Net)-based ratiometric fluorescence platform for cancer-related gene biosensing

Efficient detection of cancer-related nucleic acids is pivotal for early cancer diagnosis. This study introduces a target induced three-dimensional DNA biomimetic networks (B-3D Net)-based ratiometric fluorescence platform using manganese dioxide nanosheets (MnO2 NS)/o-phenylenediamine in combination with hybridization chain reaction to detect cancer-related genes (p53 gene). The incorporation of multiple signals within the B-3D networks can significantly enhance catalytic activity and amplify the output signals, enabling a high sensitivity. Compared with traditional ratio fluorescence platforms, there is no demand to synthesize fluorescent nanoprobes due to the in-situ formation of fluorescence species, which is simple and cost-effective. The corresponding assay demonstrated exceptional sensitivity (with a detection limit as low as 2 fM), selectivity, reproducibility, and accuracy, which mitigates disturbances caused by instrument errors, an inaccurate probe count, and the microenvironment. Furthermore, the ease and straightforwardness of discerning changes in fluorescent brightness and colour by the naked eye are evident. Using the relevant software, a linear relationship between fluorescent images using a smartphone and target concentration was obtained. Hence, the novel ratiometric sensing system will demonstrate new opportunities on determination of target DNA samples in complex biological environments.

Ratio-fluorescent and naked-eye visualized dual-channel sensing strategy for Cu2+ and alkaline phosphatase activity assay

The levels of Cu2+ and alkaline phosphatase (ALP) are the important indicators of the developed stage of the relative diseases. Herein, a binary ratio-fluorescent and smartphone-assisted visual strategy basing on 4'-aminomethyl-4, 5', 8-trimethylpsoralen (AMT) and the oxidation of o-phenylenediamine was developed. Under the action of Cu2+, the fluorescent molecule, 3-diaminophenazine (DAP) formed which can act as a fluorescent acceptor of the ratio-fluorescent sensor. The emission spectrum of AMT overlapped with the excitation spectrum of DAP and, thus, it can act as the fluorescent donor of the ratio-fluorescent sensor. With the increasing concentration of Cu2+ and ALP, the fluorescent intensity of AMT decreased and the fluorescent intensity of DAP increased. The dual-emission reverse change ratio-fluorescent sensor realized the sensitive detection Cu2+ and ALP with the detection limits of 2 nM and 0.03 U/mL, respectively. In addition, the acceptable recoveries were obtained when the Cu2+ and ALP in spiked samples were detected. Furthermore, the relative activity of ALP was assessed by increasing the concentrations of the inhibitor Na3VO4 and IC50 of 25 μM was obtained. Importantly, the target concentration-dependent color change of DAP allowed us to utilize R/B ratio values to design the smartphone-assisting visual detection model of Cu2+ and ALP activity with the detection limits of 0.1 μM and 0.18 U/mL. This simple, flexible, dual-mode sensor strategy has a potential for disease diagnosis and drug screening.

The construction of dual-emissive ratiometric fluorescent probes based on fluorescent nanoparticles for the detection of metal ions and small molecules

With the rapid development of fluorescent nanoparticles (FNPs), such as CDs, QDs, and MOFs, the construction of FNP-based probes has played a key role in improving chemical sensors. Ratiometric fluorescent probes exhibit distinct advantages, such as resistance to environmental interference and achieving visualization. Thus, FNP-based dual-emission ratiometric fluorescent probes (DRFPs) have rapidly developed in the field of metal ion and small molecule detection in the past few years. In this review, firstly we introduce the fluorescence sensing mechanisms; then, we focus on the strategies for the fabrication of DRFPs, including hybrid FNPs, single FNPs with intrinsic dual emission and target-induced new emission, and DRFPs based on auxiliary nanoparticles. In the section on hybrid FNPs, methods to assemble two types of FNPs, such as chemical bonding, electrostatic interaction, core satellite or core-shell structures, coordination, and encapsulation, are introduced. In the section on single FNPs with intrinsic dual emission, methods for the design of dual-emission CDs, QDs, and MOFs are discussed. Regarding target-induced new emission, sensitization, coordination, hydrogen bonding, and chemical reaction induced new emissions are discussed. Furthermore, in the section on DRFPs based on auxiliary nanoparticles, auxiliary nanomaterials with the inner filter effect and enzyme mimicking activity are discussed. Finally, the existing challenges and an outlook on the future of DRFP are presented. We sincerely hope that this review will contribute to the quick understanding and exploration of DRFPs by researchers.

Controllable formation of polydopamine on carbon dots for ultrasensitive detection of alkaline phosphatase and ratiometric fluorescence immunoassay of benzocaine

Sensing alkaline phosphatase (ALP) activity with high sensitivity and accuracy is critical for both ALP-related health and food safety supervision and the development of ALP-triggered immunoassay platforms. Herein, an ultrasensitive ratiometric fluorescence (RF) sensing system based on the controllable formation of luminescent polydopamine and efficient quenching of carbon dots was proposed for the ALP activity assay, achieving quantitative detection in the range of 0.01-100 mU/L. Furthermore, this RF sensing system was integrated with an ALP-based ELISA platform to construct an RF-ELISA for benzocaine, a potentially abused anesthetic in edible fish, and ultrasensitive assay at the level of fg/mL was realized. This ratiometric strategy-based platform effectively shields various interferences through the self-calibration effect, thus providing more accurate and reliable quantification results. This study not only offers an efficient method for ultratrace detection of ALP and benzocaine but also proposes a universal platform for ultrasensitive detection of diverse targets in food analysis by replacing the recognition unit.

Gelatinous lanthanide coordination polymer with aggregation-enhanced antenna effect for ratiometric detection of endogenous alkaline phosphatase

Aggregation-induced emission (AIE) and antenna effect (AE) are two significant behaviors that have attracted increasing attention. However, it is challenging to achieve the synergistic effect of AIE and AE in luminescent materials for more extensive applications. Here, four gelatinous Ln³⁺ coordination polymers (Ln-CPs) are synthesized by self-assembly of ciprofloxacin (CIP), adenosine monophosphate (AMP), and Ln³⁺ ions in aqueous medium. Encouragingly, a remarkable increase in the characteristic fluorescence of Ln³⁺ and a significant decrease in CIP are observed along with increasing concentration of Ln-CPs, which is attributed to the large aggregates formed by self-assembly that strictly constrain the intramolecular motions of antenna ligands, thereby achieving the aggregation-enhanced AE. More meaningfully, Eu-CP not only shows a rice-like morphology at high aggregation state, but also provides an opportunity for the selective detection of alkaline phosphatase (ALP). A new flower-like polymer is formed upon incubating Eu-CP with ALP, accompanied by the fluorescence quenching of Eu³⁺ and recovery of CIP, a ratiometric determination of ALP in the range of 0.1-6.0 U·L^-1 is thus achieved. Additionally, ALP assay in human serum and bioimaging in living cells have been successfully performed. This research opens a new horizon for the fabrication of Ln³⁺-based luminescent materials with promising applications.

Self-enhanced peroxidase-like activity in a wide pH range enabled by heterostructured Au/MOF nanozymes for multiple ascorbic acid-related bioenzyme analyses

Nanozymes, a class of catalytic nanomaterials, have shown great potential to substitute natural enzymes in various applications. Nevertheless, the pursuit of high-efficiency peroxidase-like activity in a wide pH range is one of the major challenges existing in designing nanozymes. A feasible strategy is to construct an artificial active center by using porous materials as stable supporting structures, which can actively modulate biocatalytic activities via their porous atomic structures and more active sites. Herein, a gold nanoparticles/metal-organic framework (MOF) heterostructure was prepared using UiO-66 as a stable support structure (Au NPs/UiO-66), which demonstrates enhanced peroxidase-like activity, ∼8.95 times higher than that of pure Au NPs. Strikingly, Au NPs/UiO-66 exhibits excellent stability (maintains above 80% activity at 40-70 °C and retains 93% activity after 3 months of storage) and sustained high relative activity (above 90%) over a pH range of 5.0-9.0 due to the homogeneous dispersibility of free-ligand Au NPs and the strong chemical interaction between the Au NPs and the UiO-66 host. Moreover, a colorimetric assay of ascorbic acid (AA) and three AA-related biological enzymes was developed based on Au NPs/UiO-66 nanozyme, which has a good linear detection range and excellent anti-interference ability. This work provides important guidance for the expansion of metal NPs/MOF heterostructure nanozymes and their application prospects in the development of biosensors.

Threaded 3D microfluidic paper analytical device-based ratiometric fluorescent sensor for background-free and visual detection of organophosphorus pesticides

With the increasing concerns of food safety and environmental protection, it is desirable to develop reliable, effective, and portable sensors for detection of organophosphorus pesticides (OPs). Here, a cascade reaction system integrated with threaded 3D microfluidic paper analytical device (3D μPAD) was firstly developed for background-free and visual detection of OPs in agricultural samples. Butyrylcholinesterase (BChE) hydrolyzed acetylcholine into thiocholine (TCh), which reduced MnO₂ nanosheets into Mn²⁺. With addition of OPs, BChE activity was irreversibly inhibited, and the generation of TCh and the reduction of MnO₂ nanosheets were prevented. Then the remaining MnO₂ nanosheets oxidized o-phenylenediamine into 2,3-diaminophenazine with yellow-emission fluorescence, which quenched the fluorescence intensity of red-emission carbon dots (RCDs) via inner-filter effect. Based on above mechanism, a ratiometric fluorescent system was established for OPs detection. Threaded 3D μPAD consisted of 4 layers, which allowed to load and/or add reagents to trigger the cascade reaction system for OPs detection. The fluorescent images presented distinguishable color variations from red to yellow with dichlorvos concentrations ranging from 2.5 to 120 μg L^-1, and the limit of detection was 1.0 μg L^-1. In the practical samples testing, threaded 3D μPAD can eliminate background influence on fluorescent signal for OPs detection. Threaded 3D μPAD integrated with ratiometric sensing platform has merits of accuracy response, facile operation, and background-free detection, which supplies a new alternative approach for on-site pesticide detection.

Modulation of inner filter effect between persistent luminescent particles and 2, 3-diaminophenazine for ratiometric fluorescent assay of ascorbic acid and ascorbate oxidase activity

Ascorbate oxidase (AAO) and ascorbic acid (AA) play an important role in delaying lives senescence and metabolism. In this study, a sensitive ratiometric fluorescence sensing system based on the inner filter effect (IFE) between persistent luminescent particles (PLPs) and 2, 3-diaminophenazine (DAP), was designed for the detection of AA and AAO activity. Wherein, PLPs emit blue fluorescence at 475 nm with an excitation wavelength of 370 nm. CoOOH nanosheets with oxidase-like activity can oxidize o-phenylenediamine (OPD) to produce 2, 3-diaminophenazine (DAP) with orange fluorescence at 558 nm. The generated DAP quenched the fluorescence of PLPs by an inner filter effect (IFE). When AA was introduced to the system, CoOOH nanosheets were destroyed and reduced to Co²⁺, thereby inhibiting the oxidization of OPD and effectively preserving the blue fluorescence of PLPs at 475 nm. Besides, AAO can catalyse AA to produce the oxided dehydroascorbic acid (DHA). The dissipative AA can recover orange fluorescence of DAP with weakening the blue fluorescence of PLPs. Therefore, a sensitive ratio fluorescence sensing strategy was established by using PLPs as the reference signal and DAP as a reported signal for the detection of AA and AAO activity. Under optimal conditions, the obtained linear ranges were 1-45 μM and 1-20 mU/mL, and detection limits were 0.2 μM and 0.25 mU/mL, respectively. Finally, this proposed ratiometric fluorescent analytical strategy was used to detect AA in real samples (lemon, orange, tomato), which exhibited satisfactory results comparing with commercial kit.

Thermal-controlled active sensor module using enzyme-regulated UiO-66-NH2/MnO2 fluorescence probe for total organophosphorus pesticide determination

An enzyme-regulated UiO-66-NH₂/MnO₂ fluorescence sensor, fully functionalized with spectrometric capacities, is developed for budget-friendly total organophosphorus pesticides (OPs) determination. The fluorescence probe, UiO-66-NH₂/MnO₂, is hydrothermally synthesized and morphologically examined. A specialized enzyme-catalyzed reaction, which can be gradually inhibited by OPs, is designed with participations of alkaline phosphatase (ALP) and sodium L-ascorbyl-2-phosphate (AAP). The reaction product of ascorbic acid (AA) decomposes MnO₂ and restores UiO-66-NH₂ fluorescence, establishing a relationship between OPs level and fluorescence intensity. Interactions among UiO-66-NH₂, MnO₂, OPs, and AA are clarified. Stepwise optimizations are performed to the UiO-66-NH₂/MnO₂ probe, ensuring considerable advantages as OPs affinity and fluorescence quenching behavior over rival nanomaterials. Analytical advances are magnified by fabricating an active sensor module, with self-acting thermal regulation for optimal enzyme activity. Under 4 and 20 °C environment, regulation period is less than 40 and 100 s. In total OPs determination for laboratorial and real-vegetable samples, this method exhibits uniform and log-linear responses to common species of OPs in a range as 1.0 × 10^-7~10 mg L^-1, and limit of detection is established as 8.9 × 10^-8 mg L^-1. Proposed readouts are validated with certified HPLC and recovery test. Relative errors and recovery rates are found as 2.7-6.4% and 95.8-102.6%, respectively.

Phosphate-triggered ratiometric fluoroimmunoassay based on nanobody-alkaline phosphatase fusion for sensitive detection of 1-naphthol for the exposure assessment of pesticide carbaryl

The excessive use of carbaryl has resulted in the risk of its exposure. In this study, we isolated six nanobodies (Nbs) from a camelid phage display library against the biomarker of carbaryl, 1-naphthol (1-NAP). Owing to its characteristics of easy genetic modifications, we produced a nanobody-alkaline phosphatase (Nb-CC4-ALP) fusion protein with good stability. A dual-emission system based ratiometric fluoroimmunoassay (RFIA) for quick and highly sensitive determination of 1-NAP was developed. Silicon nanoparticles (SiNPs) was used as an internal reference and for aggregation-induced emission enhancement (AIEE) of gold nanoclusters (AuNCs), while AuNCs could be quenched by MnO₂ via oxidation. In the presence of ALP, ascorbic acid phosphate (AAP) can be transformed into ascorbic acid (AA), the later can etch MnO₂ to recover the fluorescence of the AuNCs. Based on optimal conditions, the proposed assay showed 220-fold sensitivity improvement in comparison with conventional monoclonal antibody-based ELISA. The recovery test of urine samples and the validation by standard HPLC-FLD demonstrated the proposed assay was an ideal tool for screening 1-NAP and provided technical support for the monitoring of carbaryl exposure.

A label-free and modification-free ratiometric electrochemical strategy for enhanced natural enzyme detection using a bare electrode and nanozymes system

Ratiometric electrochemical assays have been demonstrated to be more sensitive and selective in various sensing events, mainly due to their affordable built-in correction and good self-reference capability. But it is known that complicated modification and labeling operations usually are necessary for the construction of ratiometric electrochemical assays, therefore is a hot and important issue needing consideration carefully. We herein report a new yet simple bare electrode-based ratiometric electrochemical bioassay to achieve sensitive and selective analysis of alkaline phosphatase (ALP), using a liquid phase system that contains CoOOH nanozymes and commercially available indicator substrate. This proposed bioassay works based on the ratiometric change of dual electrochemical signals, arising from an exclusive target ALP-triggered hydrolysis of electrochemical substrate p-nitrophenyl phosphate (PNPP). In this design, the two hydrolyzed products of electrochemically active p-nitrophenol (PNP) and electrochemically inactive phosphate anion (PO₄^3-) are responsible together for the ratiometric electrochemical analysis of ALP. PNP exhibits a straightforward current response toward ALP content; however, PO₄^3- cannot show a direct electrochemical signal thus is rationally designed to offer an alternative response by linking it with the specific CoOOH nanozyme-catalyzed reaction of 3,3',5,5'-tetramethylbenzidine (TMB) and H₂O₂, in which the nanozyme-catalyzed product oxTMB shows a direct reduction current at the GCE, and significantly decreases with increasing PO₄^3- species due to the good inhibition of PO₄^3- toward CoOOH nanozyme activity. As a result, a ratiometric electrochemical strategy for ALP analysis with a low limit of detection of 0.366 U/L (S/N = 3) was successfully achieved by integrating the above direct and indirect dual electrochemical responses. This developed bioassay can allow the quantitative diagnosis of ALP activity especially with a label-free and modification-free merit, therefore paving the way for simple, convenient, and portable electroanalytical tools in biosensing design and application.

Ratiometric fluorescence immunoassay based on MnO2–o-phenylenediamine–fluorescent carbon nanodots for the detection of α-fetoprotein via fluorescence resonance energy transfer

The ratiometric fluorescence immunoassay based on MnO2–o-phenylenediamine–fluorescent carbon nanodots is superior to the traditional single-wavelength-based method.

Sensitive ratiometric fluorescence probe based on chitosan carbon dots and calcein for Alkaline phosphatase detection and bioimaging in cancer cells

Alkaline phosphatase (ALP) is a commonly used marker in clinical practice, and this enzyme is a key indicator for diagnosing various diseases. In this study, we describe the development of a reliable and novel fluorescent assay for ALP detection based on chitosan carbon dots (C-CDs, peak emission, 412 nm) and calcein (peak emission, 512 nm). In the presence of Eu³⁺ (which binds calcein), the fluorescence intensity of calcein is quenched. Utilizing the ALP-triggered generation of phosphate ions (PO₄^3-) from the substrate p-nitrophenyl phosphate (pNPP), the Eu³⁺ ions bind PO₄^3- (which shows a higher affinity toward Eu³⁺ than calcein), and the fluorescence of calcein is recovered. As a consequence, C-CDs fluorescence is decreased by inner filter effect (IFE). Exploiting these changes in the fluorescence intensity ratio of C-CDs and calcein, we developed a high sensitivity, accurate, and easily synthesized ratiometric fluorescence probe. Our novel fluorescent bioassay demonstrates good linear relationship in the 0.09-0.8 mU mL^-1 range, with a low detection limit of 0.013 mU mL^-1. The excellent applicability of this novel assay in HepG2 cells and human serum samples demonstrates that our novel method has excellent biomedical research and disease diagnosis prospects.