A novel green lignosulfonic acid/Nafion composite membrane with reduced cost and enhanced thermal stability

A fluorescent MOF and its synthesized MOF@cotton composite: Ratiometric sensing of vitamin B2 and antibiotic drug molecule

Here, we demonstrated the synthesis of a zinc based luminescent MOF, 1 (NDC = 2,6- naphthalenedicarboxylate) for the ratiometric detection of biomarker riboflavin (RBF; vitamin B2) in water dispersed medium. Further, this MOF detected two other antibiotic drug molecules, nitrofurantoin (NFT) and nitrofurazone (NZF). The detection of these analytes is very quick (∼seconds), and the limit of detection (LOD) for RBF, NZF and NFT are calculated as 16.58 ppm, 47.63 ppb and 56.96 ppb, respectively. The detection of these analytes was also comprehended by solid, solution, cost-effective paper strip method i.e., triphasic identification capabilities. The sensor is reusable without losing its detection efficacy. The sensor further showed the recognition abilities of these antibiotics in real field samples (river water, urine and tablet) and RBF in vitamin B2 pills and food samples (milk and cold drinks). The sensing merit of 1 urged us to fabricate of 1@cotton fabric composite, which exhibited the colorimetric detection of these analytes. In-depth experimental analysis suggested that the occurrence of photo-induced electron transfer (PET), fluorescence resonance energy transfer (FRET), and the inner filter effect (IFE) are the possible sensing mechanisms for the recognition of the antibiotics drug. The FRET mechanism is responsible for the recognition of RBF. The sensing mechanism is further supported by the theoretical analysis and the excited lifetime measurement.

Fabrication of fully bio-based malleable thermoset derived from cellulose, furfural and plant oil for advanced capacitive sensor

Fabrication of sustainable bio-based malleable thermosets (BMTs) with excellent mechanical properties and reprocessing ability for applications in electronic devices has attracted more and more attention but remains significant challenges. Herein, the BMTs with excellent mechanical robustness and reprocessing ability were fabricated via integrating with radical polymerization and Schiff-base chemistry, and employed as the flexible substrate to prepare the capacitive sensor. To prepare the BMTs, an elastic bio-copolymer derived from plant oil and 5-hydroxymethylfurfural was first synthesized, and then used to fabricate the dynamic crosslinked BMTs through Schiff-base chemistry with the amino-modified cellulose and polyether amine. The synergistic effect of rigid cellulose backbone and the construction of dynamic covalent crosslinking network not only achieved high tensile strength (8.61 MPa) and toughness (3.77 MJ/m3) but also endowed the BMTs with excellent reprocessing ability with high mechanical toughness recovery efficiency of 104.8 %. More importantly, the BMTs were used as substrates to fabricate the capacitive sensor through the CO2-laser irradiation technique. The resultant capacitive sensor displayed excellent and sensitive humidity sensing performance, which allowed it to be successfully applied in human health monitoring. This work paved a promising way for the preparation of mechanical robustness malleable bio-thermosets for electronic devices.

Yolk-shell composite optical sensors with chiral L-histidine/Rhodamine 6G for high-sensitivity "turn-on" detection of L-proline

Chirality is a ubiquitous phenomenon in nature and has attracted wide attention in the biomedicine, pharmaceutics and biosensing research fields. Enantiomeric recognition of chiral compounds, especially chiral drugs and chiral amino acids, is important for human health and nutrition. In this work, through the encapsulation of L-His&R6G (L-His = L-Histidine; R6G = Rhodamine 6G) into MOF@MOF framework ZIF-67@ZIF-8, composited material L-His&R6G@ZIF-67@ZIF-8 can be obtained. Additionally, through the etching process, a unique yolk-shell ZIF-8 chiral composite optical sensors L-His&R6G@ZIF-8 (1) can be successfully prepared. Photo-luminescent (PL) experiment also reveals that 1 can highly sensitively detect L-Proline (L-Pro) through the "turn-on" detection strategy (KBH = 1.22 × 104 M-1 and detection limit 1.9 μM). Further yolk-shell L-His&R6G@ZIF-8-based fabricate flexible mixed-matrix membranes has been prepared using doctor-blading technique, which show significant fluorescence enhancement effect under ultraviolet lamp. This work also provides the unique example of preparing chiral yolk-shell framework composite sensors, which have broad application in chiral sensing area.

Preparation and characterization of zwitterion-substituted lignin/Nafion composite membranes

In this study, a novel zwitterion-substituted lignin (ZL) containing amino and sulfonic acid groups was synthesized, and ZL/Nafion composite membranes were fabricated as proton exchange membranes. Kraft lignin was modified using an aminosilane and 1,3-propanesultone via a continuous grafting reaction to provide zwitterionic moieties. Chemical structural analyses confirmed the successful introduction of the zwitterion moiety into lignin. In particular, the surface charge of ZL is positive in an acidic medium and negative in a basic medium, suggesting that ZL is a zwitterionic material. ZL was incorporated into a Nafion membrane to enhance its ion exchange capacity, thermal stability, and hydrophilicity. The proton conductivity of ZL/Nafion 0.5 %, 151.0 mS/cm, was 55.3 % higher than that of unmodified ML (methanol-soluble lignin)/Nafion 0.5 % (97.2 mS/cm), indicating that the zwitterion moiety of ZL enhances the proton transport ability. In addition, oxidative stability evaluation confirmed that ZL/Nafion 2 % was chemically more durable than pure Nafion. This confirmed that using lignin as a membrane additive yielded positive results in terms of chemical durability and oxidation stability in Nafion. Therefore, ZL is expected to be utilized as a multifunctional additive and exhibits the potential for fuel cell applications.

A Strong, Tough and Fire-Retardant Biomimetic Multifunctional Wooden Laminate

Mildly delignified wood showed a well-preserved wood cell wall framework, and its derived compressed materials demonstrate excellent mechanical properties and advanced functional material potential. Here, we proposed a simple yet effective approach for making strong, tough, and fire-retardant wooden laminate by a three-step process of mild delignification, infiltrating potassium nonafluoro-1-butanesulfonate (PFBS), and hot-pressing to densify the material. PFBS can be infiltrated into the micro/nano-structures of the mildly delignified wood to achieve a good flame-resistant protective barrier. Flame retardant tests showed that this strong, tough, and fire-retardant wooden laminate has a superior flame-retardant performance to natural wood. Additionally, the wooden laminate also exhibits a simultaneously enhanced tensile strength (175.6 MPa vs. 89.9 MPa for natural wood) and toughness (22.9 MJ m-3vs. 10.9 MJ m-3 for natural wood). Given these attributes, the resulting wooden laminates are identified as promising candidates for high-performance structural applications, fulfilling stringent requirements for both mechanical resilience and flame-retardant efficacy.

Enhanced proton conductivity in amino acid based self-assembled non-porous hydrogen-bonded organic frameworks

β-Alaninium oxalate hemihydrate, glycinium oxalate, and L-leucinium oxalate salt-cocrystals as non-porous self-assembled hydrogen-bonded organic frameworks afforded proton conductivity of 2.43 × 10^-2 S cm^-1 (60 °C, 95% RH), 3.03 × 10^-2 S cm^-1 (60 °C, 95% RH), and 1.19 × 10^-2 S cm^-1 (80 °C, 95% RH), respectively. These materials possess an extensive 3-dimensional network of hydrogen bonds in their crystal structures, making them efficient proton conducting membranes. The reduction in conductivity values over 10^-1 S cm^-1 order upon exposure of the samples to a D₂O atmosphere in extreme conditions ratified the role of humidity for the conduction of protons. This work explores the relationship between structural features and proton conductivity for the design of proton conducting membranes that are easy to synthesize, eco-friendly, and cheap with potential for futuristic applications.

Enhanced proton conductivity of Nafion membrane induced by incorporation of MOF-anchored 3D microspheres: a superior and promising membrane for fuel cell applications

A novel 3D core-shell material composed of polyacrylate carboxyl microspheres (PCMs) and ZIF-8 nanoparticles was used to promote proton conduction in the Nafion matrix. The Nafion/ZIF-8@PCM membranes displayed excellent proton conductivity (0.24 S cm^-1) and physicochemical properties due to special structural characteristics. More importantly, this new concept has a strong practical guiding significance for the fabrication of novel PEMs.