Understanding the Z-scheme heterojunction of BiVO4/PANI for photoelectrochemical nitrogen reduction

Understanding the cascade heterojunction of CuPc/Bi-MOF for photoelectrochemical nitrate reduction

Herein, a CuPc/Bi-MOF cascade heterojunction is synthesized exhibiting an excellent NH3 yield (7.13 μg h-1 cm-2) and stability. Characterization studies show that the cascade heterostructure with a unique morphology and oxygen vacancies offers new insights into future photoelectrocatalytic material design.

Intermediates Regulation via Electron-Deficient Cu Sites for Selective Nitrate-to-Ammonia Electroreduction

Ammonia (NH3 ), known as one of the fundamental raw materials for manufacturing commodities such as chemical fertilizers, dyes, ammunitions, pharmaceuticals, and textiles, exhibits a high hydrogen storage capacity of ≈17.75%. Electrochemical nitrate reduction (NO3 RR) to valuable ammonia at ambient conditions is a promising strategy to facilitate the artificial nitrogen cycle. Herein, copper-doped cobalt selenide nanosheets with selenium vacancies are reported as a robust and highly efficient electrocatalyst for the reduction of nitrate to ammonia, exhibiting a maximum Faradaic efficiency of ≈93.5% and an ammonia yield rate of 2360 µg h-1 cm-2 at -0.60 V versus reversible hydrogen electrode. The in situ spectroscopical and theoretical study demonstrates that the incorporation of Cu dopants and Se vacancies into cobalt selenide efficiently enhances the electron transfer from Cu to Co atoms via the bridging Se atoms, forming the electron-deficient structure at Cu sites to accelerate NO3 - dissociation and stabilize the *NO2 intermediates, eventually achieving selective catalysis in the entire NO3 RR process to produce ammonia efficiently.

Nitrogen Photoelectrochemical Reduction on TiB2 Surface Plasmon Coupling Allows Us to Reach Enhanced Efficiency of Ammonia Production

Ammonia is one of the most widely produced chemicals worldwide, which is consumed in the fertilizer industry and is also considered an interesting alternative in energy storage. However, common ammonia production is energy-demanding and leads to high CO2 emissions. Thus, the development of alternative ammonia production methods based on available raw materials (air, for example) and renewable energy sources is highly demanding. In this work, we demonstrated the utilization of TiB2 nanostructures sandwiched between coupled plasmonic nanostructures (gold nanoparticles and gold grating) for photoelectrochemical (PEC) nitrogen reduction and selective ammonia production. The utilization of the coupled plasmon structure allows us to reach efficient sunlight capture with a subdiffraction concentration of light energy in the space, where the catalytically active TiB2 flakes were placed. As a result, PEC experiments performed at -0.2 V (vs. RHE) and simulated sunlight illumination give the 535.2 and 491.3 μg h-1 mgcat-1 ammonia yields, respectively, with the utilization of pure nitrogen and air as a nitrogen source. In addition, a number of control experiments confirm the key role of plasmon coupling in increasing the ammonia yield, the selectivity of ammonia production, and the durability of the proposed system. Finally, we have performed a series of numerical and quantum mechanical calculations to evaluate the plasmonic contribution to the activation of nitrogen on the TiB2 surface, indicating an increase in the catalytic activity under the plasmon-generated electric field.

Atomic-layered V2C MXene containing bismuth elements: 2D/0D and 2D/2D nanoarchitectonics for hydrogen evolution and nitrogen reduction reaction

The exploitation of two-dimensional (2D) vanadium carbide (V₂CT_x, denoted as V₂C) in electrocatalytic hydrogen evolution reaction (HER) and nitrogen reduction reaction (NRR) is still in the stage of theoretical study with limited experimental exploration. Here, we present the experimental studies of V₂C MXene-based materials containing two different bismuth compounds to confirm the possibility of using V₂C as a potential electrocatalyst for HER and NRR. In this context, for the first time, we employed two different methods to synthesize 2D/0D and 2D/2D nanostructures. The 2D/2D V₂C/BVO consisted of BiVO₄ (denoted BVO) nanosheets wrapped in layers of V₂C which were synthesized by a facile hydrothermal method, whereas the 2D/0D V₂C/Bi consisted of spherical particles of Bi (Bi NPs) anchored on V₂C MXenes using the solid-state annealing method. The resultant V₂C/BVO catalyst was proven to be beneficial for HER in 0.5 M H₂SO₄ compared to pristine V₂C. We demonstrated that the 2D/2D V₂C/BVO structure can favor the higher specific surface area, exposure of more accessible catalytic active sites, and promote electron transfer which can be responsible for optimizing the HER activity. Moreover, V₂C/BVO has superior stability in an acidic environment. Whilst we observed that the 2D/0D V₂C/Bi could be highly efficient for electrocatalytic NRR purposes. Our results show that the ammonia (NH₃) production and faradaic efficiency (FE) of V₂C/Bi can reach 88.6 μg h^-1 cm^-2 and 8% at -0.5 V vs. RHE, respectively. Also V₂C/Bi exhibited excellent long-term stability. These achievements present a high performance in terms of the highest generated NH₃ compared to recent investigations of MXenes-based electrocatalysts. Such excellent NRR of V₂C/Bi activity can be attributed to the effective suppression of HER which is the main competitive reaction of the NRR.

Recent Progress in Interface Engineering of Nanostructures for Photoelectrochemical Energy Harvesting Applications

With rapid and continuous consumption of nonrenewable energy, solar energy can be utilized to meet the energy requirement and mitigate environmental issues in the future. To attain a sustainable society with an energy mix predominately dependent on solar energy, photoelectrochemical (PEC) device, in which semiconductor nanostructure-based photocatalysts play important roles, is considered to be one of the most promising candidates to realize the sufficient utilization of solar energy in a low-cost, green, and environmentally friendly manner. Interface engineering of semiconductor nanostructures has been qualified in the efficient improvement of PEC performances including three basic steps, i.e., light absorption, charge transfer/separation, and surface catalytic reaction. In this review, recently developed interface engineering of semiconductor nanostructures for direct and high-efficiency conversion of sunlight into available forms (e.g., chemical fuels and electric power) are summarized in terms of their atomic constitution and morphology, electronic structure and promising potential for PEC applications. Extensive efforts toward the development of high-performance PEC applications (e.g., PEC water splitting, PEC photodetection, PEC catalysis, PEC degradation and PEC biosensors) are also presented and appraised. Last but not least, a brief summary and personal insights on the challenges and future directions in the community of next-generation PEC devices are also provided.

A Plasmon Resonance Enhanced Photo-Electrode to Promote NH3 Yield in Sustainable N2 Conversion

A key challenge for electrochemical nitrogen reduction reactions (NRR) is the difficulty for conventional catalysts to achieve high currents at low H* coverage to produce appreciable NH₃ . Herein, we specially designed an Au nanoparticle-embedded ZnSe photo-electrode to solve the problem. As-designed photo-electrode achieves excellent NRR performance with a high NH₃ yield (12.2 μg cm^-2 h^-1 ) and Faradaic efficiency (27.3 %). Our work reveals that the unique plasmon resonance effect of embedded Au nanoparticles plays a key role in increasing catalytic current when the H* coverage is decreased. Moreover, we successfully established a correlation between H* coverage and NRR performance based on theoretical calculations and experimental observations. This work paves the path for the future design of catalytic materials to overcome the selectivity and yield challenge of sustainable NH₃ production.

Construction of Frustrated Lewis Pair Sites in CeO2-C/BiVO4 for Photoelectrochemical Nitrate Reduction

Photoelectrochemical nitrate reduction reaction (PEC NIRR) could convert the harmful pollutant nitrate (NO₃^-) to high-value-added ammonia (NH₃) under mild conditions. However, the catalysts are currently hindered by the low catalytic activity and slow kinetics. Here, we reported a heterostructure composed of CeO₂ and BiVO₄, and the "frustrated Lewis pairs (FLPs)" concept was introduced for understanding the role of Lewis acids and Lewis bases on PEC NIRR. The electron density difference maps indicated that FLPs were significantly active for the adsorption and activation of NO₃^-. Furthermore, carbon (C) improved the carrier transport ability and kinetics, contributing to the NH₃ yield of 21.81 μg h^-1 cm^-2. The conversion process of NO₃^- to NH₃ was tracked by ¹⁵NO₃^- and ¹⁴NO₃^- isotopic labeling. Therefore, this study demonstrated the potential of CeO₂-C/BiVO₄ for efficient PEC NIRR and provided a unique mechanism for the adsorption and activation of NO₃^- over FLPs.

Emerging p-Block-Element-Based Electrocatalysts for Sustainable Nitrogen Conversion

Artificial nitrogen conversion reactions, such as the production of ammonia via dinitrogen or nitrate reduction and the synthesis of organonitrogen compounds via C-N coupling, play a pivotal role in the modern life. As alternatives to the traditional industrial processes that are energy- and carbon-emission-intensive, electrocatalytic nitrogen conversion reactions under mild conditions have attracted significant research interests. However, the electrosynthesis process still suffers from low product yield and Faradaic efficiency, which highlight the importance of developing efficient catalysts. In contrast to the transition-metal-based catalysts that have been widely studied, the p-block-element-based catalysts have recently shown promising performance because of their intriguing physiochemical properties and intrinsically poor hydrogen adsorption ability. In this Perspective, we summarize the latest breakthroughs in the development of p-block-element-based electrocatalysts toward nitrogen conversion applications, including ammonia electrosynthesis from N₂ reduction and nitrate reduction and urea electrosynthesis using nitrogen-containing feedstocks and carbon dioxide. The catalyst design strategies and the underlying reaction mechanisms are discussed. Finally, major challenges and opportunities in future research directions are also proposed.

Electrocatalytic reduction of 4-nitrophenol over Ni-MOF/NF: understanding the self-enrichment effect of H-bonds

The chemical adsorption and active sites play a key role in electrocatalysis, so Ni-MOF/nickel foam was fabricated for efficiently reducing 4-nitrophenol (4-NP) without any sacrificial agents. The coordinated water molecules induced the formation of hydrogen bonds (H-bonds) with the nitro group, contributing to the self-enrichment of 4-NP. The reaction rate reached 0.351 μmol min^-1 mg^-1. Therefore, this work provides a new insight into the H-bond effect in the field of electrocatalysis.