Synthesis of Intrinsically-Fluorescent Aliphatic Tautomeric Polymers for Proton-Conductivity, Dual-State Emission, and Sensing/Oxidation-Reduction of Metal Ions

Herein, fluorescent conducting tautomeric polymers (FCTPs) are developed by polymerizing 2-methylprop-2-enoic acid (MPEA), methyl-2-methylpropenoate (MMP), N-(propan-2-yl)prop-2-enamide (PPE), and in situ-anchored 3-(N-(propan-2-yl)prop-2-enamido)-2-methylpropanoic acid (PPEMPA). Among as-synthesized FCTPs, the most promising characteristics in FCTP3 are confirmed by NMR and Fourier transform infrared (FTIR) spectroscopies, luminescence enhancements, and computational studies. In FCTP3, ─C(═O)NH─, -C(═O)N<, ─C(═O)OH, and ─C(═O)OCH3 subluminophores are identified by theoretical calculations and experimental analyses. These subluminophores facilitate redox characteristics, solid state emissions, aggregation-enhanced emissions (AEEs), excited-state intramolecular proton transfer (ESIPT), and conductivities in FCTP3. The ESIPT-associated dual emission/AEEs of FCTP3 are elucidated by time correlated single photon counting (TCSPC) investigation, solvent polarity effects, concentration-dependent emissions, dynamic light scattering (DLS) measurements, field emission scanning electron microscopy images, and computational calculations. The cyclic voltammetry measurements of FCTP3 indicate cumulative redox efficacy of ─C(═O)OH, ─C(═O)NH─/-C(═O)N<, ─C(─O─)═NH+─/─C(─O─)═N+, and ─C(═N)OH functionalities. In FCTP3, ESIPT-associated dual-emission enable in the selective detection of Cr(III)/Cu(II) at λem1/λem2 with the limit of detection of 0.0343/0.079 ppb. The preferential interaction of Cr(III)/Cu(II) with FCTP3 (amide)/FCTP3 (imidol) and oxidation/reduction of Cr(III)/Cu(II) to Cr(VI)/Cu(I) are further supported by NMR-titration; FTIR and X-ray photoelectron spectroscopy analyses; TCSPC/electrochemical/DLS measurement; alongside theoretical calculations. The proton conductivity of FCTP3 is explored by electrochemical impedance spectroscopy and I-V measurements.

Experimental and theoretical comprehension of ESIPT fluorophores based on a 2-(2'-hydroxyphenyl)-3,3'-dimethylindole (HDMI) scaffold

Excited-State Intramolecular Proton Transfer (ESIPT) emission is associated with intense single or multiple fluorescence in the solid-state, along with enhanced photostability and sensitivity to the close environment. As a result, ESIPT probes are attractive candidates for ratiometric sensing of a variety of substrates. A new family of ESIPT fluorophores is described herein, inspired by the well-known 2-(2'hydroxyphenyl)benzazole (HBX) organic scaffold. The connection of 3,3'-dimethylindole (or 3H-indole) derivatives with phenol rings triggers the formation of novel 2-(2'-hydroxyphenyl)-3,3'-dimethylindole (HDMI) fluorophores, capable of stimuli-responsive ESIPT emission. This brand new family of dyes displays redshifted emission, as compared to HBX, along with an unprecedented acid/base-mediated stabilization of different rotamers, owing to supramolecular interactions with methyl groups. These compounds are therefore highly sensitive to external stimuli, such as the presence of acid or base, where protonated and deprotonated species have specific optical signatures. Moreover, a new pyridine-functionalized HDMI dye displays acid-sensitive AIE properties. The photophysical properties of all compounds have also been studied using ab initio calculations to support experiments in deciphering the nature of the various radiative transitions observed and the related excited rotameric species.

Solid-State Emissive Pillar[6]arene Derivative Having Alternate Methylene and Nitrogen Bridges

Macrocyclic arenes show conformational adaptability, which allows host-guest complexations with the size-matched guest molecules. However, their emission properties are often poor in the solid states due to the self-absorption. Herein, we newly synthesized pillar[6]arene derivatives having alternate methylene and nitrogen bridging structures. Solvatochromic study reveals that the nitrogen-embedding into the cyclic structures can strengthen the intramolecular charge transfer (CT) nature compared to that of the linear nitrogen-bridged precursor. Owing to the large Stokes shift in the solid state, one of the nitrogen-embedded pillar[6]arenes shows high absolute photoluminescence quantum yield (ΦPL=0.36). Furthermore, it displays a turn-off sensing ability toward nitrobenzene (NB) vapor; a fluorescence quenching is observed when exposed to the NB vapor. From the structural analysis before and after the exposure of NB vapor, the amorphous nitrogen-embedded pillar[6]arene efficiently co-crystallize with NB and formed non-emissive intermolecular CT complexes with NB.

Photochemical Mechanisms of Hydroxyquinoline Benzimidazole: Insights from Electronic Structure Calculations and Nonadiabatic Dynamics Simulations

Excited-state intramolecular double proton transfer (ESIDPT) has received much attention because of its widespread existence in the life reactions of living organisms, and materials with this property are significant for their special luminescent properties. In this work, the complete active space self-consistent field (CASSCF) and OM2/multireference configuration interaction (OM2/MRCI) methods have been employed to study the static electronic structure calculations of the photochemistry and the possibility of ESIDPT process of hydroxyquinoline benzimidazole (HQB) molecule, along with the nonadiabatic dynamics simulations. The computational results show that the HQB molecule is relaxed to the S1-ENOL minimum after being excited to the Franck-Condon point in the S1 state. Subsequently, during the nonadiabatic deactivation process, the OH···N proton transfer and the twisting of benzimidazole occur before arriving at the single proton transfer conical intersection S1S0-KETO. Finally, the system can either return to the initial ground-state structure S0-ENOL or to the single proton transfer ground-state structure S0-KETO, both of which have almost the same probability. The dynamics simulations also show that no double proton transfer occurs. The excited-state lifetime of HQB is fitted to 1.1 ps, and only 64% of the dynamic trajectories return to the ground state within the 2.0 ps simulation time. We hope the detailed reaction mechanism of the HQB molecule will provide new insights into similar systems.

Water sensitive fluorescence tuning of V-shaped ESIPT fluorophores: Substituent effect and trace amount water sensing in DMSO

Highly sensitive nature of excited state intramolecular proton transfer (ESIPT) functionality in organic fluorophores made them potential candidates for developing environmental sensors and bioimaging applications. Herein, we report the synthesis of V-shaped Dapsone based Schiff base ESIPT derivatives (1-3) and water sensitive wide fluorescence tuning from blue to red in DMSO. Solid-state structural analysis confirmed the V-shaped molecular structure with intramolecular H-bonding and substituent dependent molecular packing in the crystal lattice. 1 showed strong solid-state fluorescence (λmax = 554 nm, Φf = 21.2 %) whereas methoxy substitution (2 and 3) produced tunable but significantly reduced fluorescence (λmax = 547 (2) and 615 nm (3), Φf = 2.1 (2) and 6.5 % (3)). Interestingly, aggregation induced emission (AIE) studies in DMSO-water mixture revealed water sensitive fluorescence tuning. The trace amount of water (less than 1 %) in DMSO converted the non-emissive 1-3 into highly emissive state due to keto tautomer formation. Further increasing water percentage produced deprotonated state of 1-3 in DMSO and enhanced the fluorescence intensity with red shifting of emission peak. At higher water fraction, 1-3 in DMSO produced aggregates and red shifted the emission with reduction of fluorescence intensity. The concentration dependent fluorescence study revealed the very low detection limit of water in DMSO. The limit of detection (LOD) of 1, 2 and 3 were 0.14, 1.04 and 0.65 % of water in DMSO. Hence, simple Schiff bases of 1-3 showed water concentration dependent keto isomer, deprotonated and aggregated state tunable fluorescence in DMSO. Further, scanning electron microscopic (SEM) studies of 1-3 showed water concentration controlled self-assembly and tunable fluorescence.

Substituent-Controlled Photophysical Responses in Dihydropyridine Derivatives and Their Application in the Detection of Volatile Organic Contaminants

In the ever-expanding realm of organic fluorophores, structurally simple and synthetically straightforward molecules with unique photophysical properties have received special attention. Among these, 1,4-dihydropyridine (DHP) is an important scaffold that permits fine-tuning of their photophysical properties through substituents on the periphery. Herein, we describe a series of solid-emissive N-substituted 2,6-dimethyl-4-methylene-1,4-dihydropyridine derivatives appended with electron-withdrawing substituents (dicyanomethylene or 2-dicyanomethylene-3-cyano-2,5-dihydrofuran) at the C-4 position and alkyl or alkylaryl groups on the DHP nitrogen. Electronic and steric tuning exerted by these substituents resulted in interesting photophysical properties such as negative solvatochromism, solidstate, and aggregation-induced emission (AIE). Theoretical calculations were carried out to explain the solvatochromic properties. Insight into the AIE properties was obtained through variable-temperature nuclear magnetic resonance and viscosity- and temperature-dependent emission studies. The variations in molecular packing in the crystal lattice with changes in the N-substituents contributed to the tuning of solid state emission properties. Detection of aromatic volatile organic compounds (VOCs) was achieved using the aggregates of the DHP derivatives. Among the VOCs, p-xylene elicited a significant enhancement in emission, allowing its detection at submicromolar levels.

ESIPT-based probes for cations, anions and neutral species: recent progress, multidisciplinary applications and future perspectives

Fluorescent and colourimetric probes for small analytes (cations, anions and neutral molecules) have drawn significant attention in recent years. These probes interact with analytes and induce spectral change due to the variations in the photo-physical properties of the fluorophore/chromophore used. Among several photo-physical mechanisms, ESIPT (excited state intramolecular proton transfer) based probes are more advantageous due to their photo-physical properties viz. solvent polarity effect, large spectral shift with multi-channel fluorescence, high quantum yield etc. In recent years, ESIPT-based probes have shown several promising applications, especially monitoring small analytes in biological samples, smartphone app-assisted heavy metal detection in environmental samples, inkless writing, anti-counterfeiting applications etc. Therefore, this review is dedicated to recently reported ESIPT-based probes for small analytes. We have highlighted the organic units responsible for the ESIPT mechanism, their photo-physical parameters, selectivity and sensitivity properties and recent advances in their applications.

Complexes on the Base of a Proton Transfer Capable Pyrimidine Derivative: How Protonation and Deprotonation Switch Emission Mechanisms

A rare example of pyrimidine-based ESIPT-capable compounds, 2-(2-hydroxyphenyl)-4-(1H-pyrazol-1-yl)-6-methylpyrimidine (HLH), was synthesized (ESIPT─excited state intramolecular proton transfer). Its reactions with zinc(II) salts under basic or acidic conditions afforded a dinuclear [Zn2LH2Cl2] complex and an ionic (H2LH)4[ZnCl4]2·3H2O solid. Another ionic solid, (H2LH)Br, was obtained from the solution of HLH acidified with HBr. In both ionic solids, the H+ ion protonates the same pyrimidinic N atom that accepts the O-H···N intramolecular hydrogen bond in the structure of free HLH, which breaks this hydrogen bond and switches off ESIPT in these compounds. This series of compounds which includes neutral HLH molecules and ionic (LH)- and (H2LH)+ species allowed us to elucidate the impact of protonation and coordination coupled deprotonation of HLH on the photoluminescence response and on altering the emission mechanism. The neutral HLH compound exhibits yellow emission as a result of the coexistence of two radiative decay channels: (i) T1 → S0 phosphorescence of the enol form and (ii) anti-Kasha S2 → S0 fluorescence of the keto form, which if feasible due to the large S2-S1 energy gap. However, owing to the efficient nonradiative decay through an energetically favorable conical intersection, the photoluminescence quantum yield of HLH is low. Protonation or deprotonation of the HLH ligand results in the significant blue-shift of the emission bands by more than 100 nm and boosts the quantum efficiency up to ca. 20% in the case of [Zn2LH2Cl2] and (H2LH)4[ZnCl4]2·3H2O. Despite both (H2LH)4[ZnCl4]2·3H2O and (H2LH)Br have the same (H2LH)+ cation in the structures, their emission properties differ significantly, whereas (H2LH)Br shows dual emission associated with two radiative decay channels: (i) S1 → S0 fluorescence and (ii) T1 → S0 phosphorescence, (H2LH)4[ZnCl4]2·3H2O exhibits only fluorescence. This difference in the emission properties can be associated with the external heavy atom effect in (H2LH)Br, which leads to faster intersystem crossing in this compound. Finally, a huge increase in the intensity of the phosphorescence of (H2LH)Br on cooling leads to pronounced luminescence thermochromism (violet emission at 300 K, sky-blue emission at 77 K).

Interplay between Dual-State and Aggregation-Induced Emission with ESIPT Scaffolds Containing Triphenylamine Substituents: Experimental and Theoretical Studies

We detail the synthesis of a series of fluorophores containing triphenylamine derivatives along with their photophysical, electrochemical, and electronic structure properties. These compounds include molecular structures derived from imino-phenol (anil) and hydroxybenzoxazole scaffolds originating from similar salicylaldehyde derivatives and display excited-state intramolecular proton transfer. We show that depending on the nature of the π-conjugated scaffold, different photophysical processes are observed: aggregation-induced emission or dual-state emission, with a modulation of the fluorescence color and redox properties. The photophysical properties are further rationalized with the help of ab initio calculations.

ESIPT-Capable 4-(2-Hydroxyphenyl)-2-(Pyridin-2-yl)-1H-Imidazoles with Single and Double Proton Transfer: Synthesis, Selective Reduction of the Imidazolic OH Group and Luminescence

1H-Imidazole derivatives establish one of the iconic classes of ESIPT-capable compounds (ESIPT = excited state intramolecular proton transfer). This work presents the synthesis of 1-hydroxy-4-(2-hydroxyphenyl)-5-methyl-2-(pyridin-2-yl)-1H-imidazole (L^OH,OH) as the first example of ESIPT-capable imidazole derivatives wherein the imidazole moiety simultaneously acts as a proton acceptor and a proton donor. The reaction of L^OH,OH with chloroacetone leads to the selective reduction of the imidazolic OH group (whereas the phenolic OH group remains unaffected) and to the isolation of 4-(2-hydroxyphenyl)-5-methyl-2-(pyridin-2-yl)-1H-imidazole (L^H,OH), a monohydroxy congener of L^OH,OH. Both L^OH,OH and L^H,OH demonstrate luminescence in the solid state. The number of OH···N proton transfer sites in these compounds (one for L^H,OH and two for L^OH,OH) strongly affects the luminescence mechanism and color of the emission: L^H,OH emits in the light green region, whereas L^OH,OH luminesces in the orange region. According to joint experimental and theoretical studies, the main emission pathway of both compounds is associated with T₁ → S₀ phosphorescence and not related to ESIPT. At the same time, L^OH,OH also exhibits S₁ → S₀ fluorescence associated with ESIPT with one proton transferred from the hydroxyimidazole moiety to the pyridine moiety, which is not possible for L^H,OH due to the absence of the hydroxy group in the imidazole moiety.

Solvates of a dianisyl-substituted donor–acceptor-type benzothiadiazole: mechanochromic, vapochromic, and acid-responsive multicolor luminescence

Solvates of a donor–acceptor-type fluorophore exhibited multicolor luminescence that can respond to mechanical stimuli, solvent and acid vapors.

Pharmaceutical Salts of Piroxicam and Meloxicam with Organic Counterions

Piroxicam (PRM) and meloxicam (MEL) are two nonsteroidal anti-inflammatory drugs, belonging to the Biopharmaceutics Classification System Class II drugs. In this study, six novel pharmaceutical salts of PRM and MEL with three basic organic counterions, that is, 4-aminopyridine (4AP), 4-dimethylaminopyridine (4DMP), and piperazine (PPZ), were prepared by both slurrying and slow evaporation. These salts were characterized by single-crystal and powder X-ray diffraction, thermal analysis, and Fourier transform infrared spectroscopy. All six salts, especially MEL-4DMP and MEL-4AP, showed a significantly improved apparent solubility and dissolution rate in sodium phosphate solution compared with the pure APIs. Notably, PRM-4AP and PRM-4DMP salts exhibited enhanced fluorescence, and the PRM-PPZ salt showed weaker fluorescence compared with that of pure PRM due to different luminescence mechanisms.

Tuning ESIPT-coupled luminescence by expanding π-conjugation of a proton acceptor moiety in ESIPT-capable zinc(II) complexes with 1-hydroxy-1H-imidazole-based ligands

The emission of ESIPT-fluorophores is known to be sensitive to various external and internal stimuli and can be fine-tuned through substitution in the proton-donating and proton-accepting groups. The incorporation of metal ions in the molecules of ESIPT fluorophores without their deprotonation is an emerging area of research in coordination chemistry which provides chemists with a new factor affecting the ESIPT reaction and ESIPT-coupled luminescence. In this paper we present 1-hydroxy-5-methyl-4-(pyridin-2-yl)-2-(quinolin-2-yl)-1H-imidazole (HLq) as a new ESIPT-capable ligand. Due to the spatial separation of metal binding and ESIPT sites this ligand can coordinate metal ions without being deprotonated. The reactions of ZnHal₂ with HLq afford ESIPT-capable [Zn(HLq)Hal2] (Hal = Cl, Br, I) complexes. In the solid state HLq and [Zn(HLq)Hal2] luminesce in the orange region (λ_max = 600-650 nm). The coordination of HLq by Zn²⁺ ions leads to the increase in the photoluminescence quantum yield due to the chelation-enhanced fluorescence effect. The ESIPT process is barrierless in the S₁ state, leading to the only possible fluorescence channel in the tautomeric form (T), S₁^T → S₀^T. The emission of [Zn(HLq)Hal2] in the solid state is blue-shifted as compared with HLq due to the stabilization of the ground state and destabilization of the excited state. In CH₂Cl₂ solutions, the compounds demonstrate dual emission in the UV (λ_max = 358 nm) and green (λ_max = 530 nm) regions. This dual emission is associated with two radiative deactivation channels in the normal (N) and tautomeric (T) forms, S₁^N → S₀^N and S₁^T → S₀^T, originating from two minima on the excited state potential energy surfaces. High energy barriers for the GSIPT process allow the trapping of molecules in the minimum of the tautomeric form, S₀^T, resulting in the possibility of the S₀^T → S₁^T photoexcitation and extraordinarily small Stokes shifts in the solid state. Finally, the π-system of quinolin-2-yl group facilitates the delocalization of the positive charge in the proton-accepting part of the molecule and promotes the ESIPT reaction.

N-Hydroxy-N-oxide photoinduced tautomerization and excitation wavelength dependent luminescence of ESIPT-capable zinc(II) complexes with a rationally designed 1-hydroxy-2,4-di(pyridin-2-yl)-1H-imidazole ESIPT-ligand

The ability of 1-hydroxy-1H-imidazoles to undergo proton transfer processes and to exist in N-hydroxy and N-oxide tautomeric forms can be used in coordination chemistry for the design of ESIPT-capable complexes. A series of ESIPT-capable zinc(II) complexes [Zn(HL)Hal2] (Hal = Cl, Br, I) with a rationally designed ESIPT-ligand 1-hydroxy-5-methyl-2,4-di(pyridin-2-yl)-1H-imidazole (HL) featuring spatially separated metal binding and ESIPT sites have been synthesized and characterized. Crystals of these compounds consist of a mixture of two isomers of [Zn(HL)Hal2]. Only a major isomer has a short intramolecular hydrogen bond O-H⋯N as a pre-requisite for ESIPT. In the solid state, the complexes [Zn(HL)Hal2] demonstrate temperature- and excitation wavelength dependent fluorescence in the cyan region due to the interplay of two intraligand fluorescence channels with excited state lifetimes spanning from 0.2 to 4.3 ns. The coordination of HL by Zn²⁺ ions results in an increase in the photoluminescence efficiency, and the photoluminescence quantum yields (PLQYs) of the complexes reach 12% at λ_ex = 300 nm and 27% at λ_ex = 400 nm in comparison with the PLQY of free HL of ca. 2%. Quantum chemical calculations indicate that N-hydroxy-N-oxide phototautomerization is both thermodynamically and kinetically favourable in the S₁ state for [Zn(HL)Hal2]. The proton transfer induces considerable geometrical reorganizations and therefore results in large Stokes shifts of ca. 230 nm. In contrast, auxiliary ESIPT-incapable complexes [ZnL₂][Zn(OAc)₂]₂·2H₂O and [ZnL₂][ZnCl₂]₂·4H₂O with the deprotonated ligand exhibit excitation wavelength independent emission in the violet region with the Stokes shift reduced to ca. 130 nm.

Synthesis and Optical Properties of Excited-State Intramolecular Proton Transfer (ESIPT) Emitters with Sulfobetaine Fragments

This article describes the synthetic efforts towards the solubilization of organic fluorescent emitters based on a 2-(2'-hydroxybenzofuranyl)benzazole (HBBX) scaffold in aqueous media under physiological conditions (PBS, pH 7.4). These dyes are well-known to display the excited-state intramolecular proton transfer (ESIPT) process which leads to a Stokes-shifted fluorescence with enhanced photostability and strong environment dependent features. Organic dyes are hydrophobic by nature and their vectorization into aqueous media usually necessitates amphiphilic polymers. In this study, we show that the incorporation of one or two sulfobetaine fragments, a highly biocompatible zwitterionic unit leads to the vectorization in buffer solution at pH 7.4 while keeping a reasonable ESIPT fluorescence emission. The photophysical properties of all dyes were studied in multiple solvents and showed that, depending on structure and environment, different excited-state species are observed: normal or tautomeric species, as well as a competitive anionic fluorescent derivative. This study shows that it is not only possible to solubilize fluorescent ESIPT dyes in water using sulfobetaine(s) but also that the optical properties can be finely tuned depending on small structural inputs.

Excited-State Intramolecular Proton Transfer Dyes with Dual-State Emission Properties: Concept, Examples and Applications

Dual-state emissive (DSE) fluorophores are organic dyes displaying fluorescence emission both in dilute and concentrated solution and in the solid-state, as amorphous, single crystal, polycrystalline samples or thin films. This comes in contrast to the vast majority of organic fluorescent dyes which typically show intense fluorescence in solution but are quenched in concentrated media and in the solid-state owing to π-stacking interactions; a well-known phenomenon called aggregation-caused quenching (ACQ). On the contrary, molecular rotors with a significant number of free rotations have been engineered to show quenched emission in solution but strong fluorescence in the aggregated-state thanks to restriction of the intramolecular motions. This is the concept of aggregation-induced emission (AIE). DSE fluorophores have been far less explored despite the fact that they are at the crossroad of ACQ and AIE phenomena and allow targeting applications both in solution (bio-conjugation, sensing, imaging) and solid-state (organic electronics, data encryption, lasing, luminescent displays). Excited-State Intramolecular Proton Transfer (ESIPT) fluorescence is particularly suitable to engineer DSE dyes. Indeed, ESIPT fluorescence, which relies on a phototautomerism between normal and tautomeric species, is characterized by a strong emission in the solid-state along with a large Stokes’ shift, an enhanced photostability and a strong sensitivity to the close environment, a feature prone to be used in bio-sensing. A drawback that needs to be overcome is their weak emission intensity in solution, owing to detrimental molecular motions in the excited-state. Several strategies have been proposed in that regard. In the past few years, a growing number of examples of DSE-ESIPT dyes have indeed emerged in the literature, enriching the database of such attractive dyes. This review aims at a brief but concise overview on the exploitation of ESIPT luminescence for the optimization of DSE dyes properties. In that perspective, a synergistic approach between organic synthesis, fluorescence spectroscopy and ab initio calculations has proven to be an efficient tool for the construction and optimization of DSE-ESIPT fluorophores.

A 1-Hydroxy-1H-imidazole ESIPT Emitter Demonstrating anti-Kasha Fluorescence and Direct Excitation of a Tautomeric Form

The ability of 1-hydroxy-1H-imidazoles to exist in the form of two prototropic tautomers, the N-hydroxy and the N-oxide forms, can be utilized in the design of new types of ESIPT-fluorophores (ESIPT=excited state intramolecular proton transfer). Here we report the first example of 1-hydroxy-1H-imidazole-based ESIPT-fluorophores, 1-hydroxy-5-methyl-2,4-di(pyridin-2-yl)-1H-imidazole (HL), featuring a short intramolecular hydrogen bond O-H⋅⋅⋅N (O⋅⋅⋅N 2.56 Å) as a pre-requisite for ESIPT. The emission of HL originates from the anti-Kasha S₂ →S₀ fluorescence in the N-oxide form as a result of a large S₂ -S₁ energy gap slowing down the S₂ →S₁ internal conversion. Due to an energy barrier between the N-hydroxy and N-oxide forms in the ground state, the HL molecules can be trapped and photoexcited in the N-oxide form leading to the Stokes shift of ca. 60 nm which is the smallest among known ESIPT-fluorophores.

Symmetrical and unsymmetrical thiazole-based ESIPT derivatives: the highly selective fluorescence sensing of Cu2+ and structure-controlled reversible mechanofluorochromism

Excited state intramolecular proton transfer (ESIPT) process-based organic fluorophores provide an opportunity to develop large Stokes-shifted multifunctional fluorescence systems for light emitting, chemosensing and bioimaging applications.