Assembling metal-organic cages as porous materials

Enhancing Performances of Enzyme/Metal-Organic Polyhedra Composites by Mixed-Protein Co-Immobilization

Protein immobilization using water-soluble ionic metal-organic polyhedra (MOPs) acting as porous spacers has recently been demonstrated as a potent strategy for the preparation of biocatalysts. In this article, we describe a mixed-protein approach to achieve biocomposites with adjustable enzyme contents and excellent immobilization efficiencies, in a systematic and well-controlled manner. Self-assembly of either cationic or anionic MOPs with bovine serum albumin or egg white lysozyme combined with enzymes (alkaline phosphatase, laccase or cytochrome c) led to solid-state catalysts with a high retention of enzyme activity. Furthermore, for all these systems, the dilution of enzymes within the solid-state composite led to noticeably improved catalytic performances, with both higher specific activity and affinity for substrate.

Topological control in paddlewheel metal-organic cages via ligand length variation

Varying the length of phenanthrene-derived ligands switches the selective assembly of MIInLn metal-organic cages (MOCs, n = 6 or 8) between tetrahedral, square, or triangular architectures. The limit of this approach is explored for both Cu2 and Rh2 paddlewheel MOCs, and supported by solution, solid-state and computational analysis.

Construction of binary metal-organic cage-based materials via a "covalently linked plus cage encapsulated" strategy

A strategy for constructing binary metal-organic cage (MOC)-based materials was developed. The cationic MOCs were covalently linked by organic linkers to a cationic extended network, whereas the anionic MOCs acted as counterions and were encapsulated in the network. Compared with the corresponding unary materials, the binary MOC-based materials exhibited improved porosity and adsorption performance.

Supramolecular Complexation Reinforced Polymer Frustrated Packing: Controllable Dual Porosity for Improved Permselectivity of Coordination Nanocage Mixed Matrix Membranes

The developments of mixed matrix membranes (MMMs) are severely hindered by the complex inter-phase interaction and the resulting poor utilization of inorganics' microporosity. Herein, a dual porosity framework is constructed in MMMs to enhance the accessibility of inorganics' microporosity to external gas molecules for the effective application of microporosity for gas separation. Nanocomposite organogels are first prepared from the supramolecular complexation of rigid polymers and 2 nm microporous coordination nanocages (CNCs). The network structures can be maintained with microporous features after solvent removal originated from the rigid nature of polymers, and the strong coordination and hydrogen bond between the two components. Moreover, the strong supramolecular attraction reinforces the frustrated packing of the rigid polymers on CNC surface, leading to polymer networks' extrinsic pores and the interconnection of CNCs' micro-cavities for the fast gas transportation. The gas permeabilities of the MMMs are 869 times for H2 and 1099 times for CO2 higher than those of pure polymers. The open metal sites from nanocage also contribute to the enhanced gas selectivity and the overall performance surpasses 2008 H2/CO2 Robeson upper bound. The supramolecular complexation reinforced packing frustration strategy offers a simple and practical solution to achieve improved gas permselectivity in MMMs.

From individuals to families: design and application of self-similar chiral nanomaterials

Establishing an intimate relationship between similar individuals is the beginning of self-extension. Various self-similar chiral nanomaterials can be designed using an individual-to-family approach, accomplishing self-extension. This self-similarity facilitates chiral communication, transmission, and amplification of synthons. We focus on describing the marriage of discrete cages to develop self-similar extended frameworks. The advantages of utilizing cage-based frameworks for chiral recognition, enantioseparation, chiral catalysis and sensing are highlighted. To further promote self-extension, fractal chiral nanomaterials with self-similar and iterated architectures have attracted tremendous attention. The beauty of a fractal family tree lies in its ability to capture the complexity and interconnectedness of a family's lineage. As a type of fractal material, nanoflowers possess an overarching importance in chiral amplification due to their large surface-to-volume ratio. This review summarizes the design and application of state-of-the-art self-similar chiral nanomaterials including cage-based extended frameworks, fractal nanomaterials, and nanoflowers. We hope this formation process from individuals to families will inherit and broaden this great chirality.

Bispidine Based Hg(II) 1D Coordination Polymers of Helical Topology: Stability, Selective Adsorption and 1D to 2D Dimensionality Change Via SC-to-SC Transformation

Bispidine based Hg(II) coordination polymers of helical topology CP-MeOH and CP-EtOH are almost isostructural (they mainly differ for the solvent included in their lattice and by a small % in unit cell parameters) but they differ for everything else: i) their intrinsic stability, ii) their ability to adsorb solvents upon prior evacuation, iii) their accessible structural transformations. In particular, one of the two starting materials, once evacuated, is capable to adsorb methanol from atmospheres containing binary and ternary mixtures of volatile organic compounds (MeOH, CHCl3 and EtOH) under ambient conditions (25 °C, 1 atm) and with a marked selectivity. The other one is not, but undergoes a 1D to 2D dimensionality change which can be monitored in situ by SC-XRD through a SC-to-SC process.

Solvent-free mechanochemistry for the preparation of mixed-ligand cuboctahedral porous coordination cages

This study investigates post-synthetic ligand exchange in a series of copper(II) and chromium(II) cuboctahedral cages of the formula M24(R-bdc)24 through solvent-free mechanochemistry for the preparation of mixed-ligand cages. While solvent-based ligand exchange does not proceed when the cages are insoluble or when they are dissolved in non-coordinating solvents, solvent-free mechanochemistry can be used to prepare a number of mixed-ligand cages featuring a variety of functional groups regardless of cage solubility. We further extend this strategy to intercage ligand exchange reactions where the solid-state reaction of cages proceeds in just ten minutes while corresponding solvent-based reactions require more than one week of reaction time. The results highlight mechanochemically-facilitated ligand exchange as an exceptionally facile and efficient method for the production of mixed-ligand cuboctahedral cages.

Enhancing sorption kinetics by oriented and single crystalline array-structured ZSM-5 film on monoliths

To enhance the reaction kinetics without sacrificing activity in porous materials, one potential solution is to utilize the anisotropic distribution of pores and channels besides enriching active centers at the reactive surfaces. Herein, by designing a unique distribution of oriented pores and single crystalline array structures in the presence of abundant acid sites as demonstrated in the ZSM-5 nanorod arrays grown on monoliths, both enhanced dynamics and improved capacity are exhibited simultaneously in propene capture at low temperature within a short duration. Meanwhile, the ZSM-5 array also helps mitigate the long-chain HCs and coking formation due to the enhanced diffusion of reactants in and reaction products out of the array structures. Further integrating the ZSM-5 array with Co3O4 nanoarray enables comprehensive propene removal throughout a wider temperature range. The array structured film design could offer energy-efficient solutions to overcome both sorption and reaction kinetic restrictions in various solid porous materials for various energy and chemical transformation applications.

Encapsulation engineering of porous crystalline frameworks for delayed luminescence and circularly polarized luminescence

Delayed luminescence (DF), including phosphorescence and thermally activated delayed fluorescence (TADF), and circularly polarized luminescence (CPL) exhibit common and broad application prospects in optoelectronic displays, biological imaging, and encryption. Thus, the combination of delayed luminescence and circularly polarized luminescence is attracting increasing attention. The encapsulation of guest emitters in various host matrices to form host-guest systems has been demonstrated to be an appealing strategy to further enhance and/or modulate their delayed luminescence and circularly polarized luminescence. Compared with conventional liquid crystals, polymers, and supramolecular matrices, porous crystalline frameworks (PCFs) including metal-organic frameworks (MOFs), covalent-organic frameworks (COFs), zeolites and hydrogen-bonded organic frameworks (HOFs) can not only overcome shortcomings such as flexibility and disorder but also achieve the ordered encapsulation of guests and long-term stability of chiral structures, providing new promising host platforms for the development of DF and CPL. In this review, we provide a comprehensive and critical summary of the recent progress in host-guest photochemistry via the encapsulation engineering of guest emitters in PCFs, particularly focusing on delayed luminescence and circularly polarized luminescence. Initially, the general principle of phosphorescence, TADF and CPL, the combination of DF and CPL, and energy transfer processes between host and guests are introduced. Subsequently, we comprehensively discuss the critical factors affecting the encapsulation engineering of guest emitters in PCFs, such as pore structures, the confinement effect, charge and energy transfer between the host and guest, conformational dynamics, and aggregation model of guest emitters. Thereafter, we summarize the effective methods for the preparation of host-guest systems, especially single-crystal-to-single-crystal (SC-SC) transformation and epitaxial growth, which are distinct from conventional methods based on amorphous materials. Then, the recent advancements in host-guest systems based on PCFs for delayed luminescence and circularly polarized luminescence are highlighted. Finally, we present our personal insights into the challenges and future opportunities in this promising field.

Self-Assembly of a Water-Soluble Pd16 Square Bicupola Architecture and Its Use in Aerobic Oxidation in Aqueous Medium

Designing supramolecular architectures with uncommon geometries has always been a key goal in the field of metal-ligand coordination-driven self-assembly. It acquires added significance if functional building units are employed in constructing such architectures for fruitful applications. In this report, we address both these aspects by developing a water-soluble Pd16L8 coordination cage 1 with an unusual square orthobicupola geometry, which was used for selective aerobic oxidation of aryl sulfides. Self-assembly of a benzothiadiazole-based tetra-pyridyl donor L with a ditopic cis-[(tmeda)Pd(NO3)2] acceptor [tmeda = N,N,N',N'-tetramethylethane-1,2-diamine] produced 1, and the geometry was determined by single-crystal X-ray diffraction study. Unlike the typically observed tri- or tetrafacial barrel, the present Pd16L8 coordination assembly features a distinctive structural topology and is a unique example of a water-soluble molecular architecture with a square orthobicupola geometry. Efficient and selective aerobic oxidation of sulfides to sulfoxides is an important challenge as conventional oxidation generally leads to the formation of sulfoxide along with toxic sulfone. Cage 1, designed with a ligand containing a benzothiadiazole moiety, demonstrates an ability to photogenerate reactive oxygen species (ROS) in water, thus enabling it to serve as a potential photocatalyst. The cage showed excellent catalytic efficiency for highly selective conversion of alkyl and aryl sulfides to their corresponding sulfoxides, therefore without the formation of toxic sulfones and other byproducts, under visible light in aqueous medium.

Nanogels with Metal-Organic Cages as Functional Crosslinks

A dinuclear metal-organic cage with four acrylate side chains was prepared by self-assembly. Precipitation polymerization of the cage with N-isopropylacrylamide yielded a thermoresponsive nanogel. The host properties of the cage were retained within the gel matrix, endowing the nanogel with the capability to serve as a sorbent for chloride ions in water. Moreover, a heteroleptic cage with the drug abiraterone as co-ligand was integrated into a nanogel. The addition of chloride ions induced a structural rearrangement of the metal-ligand assembly, resulting in the gradual release of abiraterone.

Unlocking High Porosity: Post-Synthetic Solvothermal Treatment of Cu-Paddlewheel Based Metal-Organic Cages

Metal-organic cages (MOCs) have garnered significant attention due to their unique discrete structures, intrinsic porosity, designability, and tailorability. However, weak inter-cage interactions, such as van der Waals forces and hydrogen bonding can cause solid-state MOCs to lose structural integrity during desolvation, leading to the loss of porosity. In this work, a novel strategy to retain the permanent porosity of Cu-paddlewheel-based MOCs, enabling their use as heterogeneous catalysts is presented. Post-synthetic solvothermal treatments in non-coordinating solvents, mesitylene, and p-xylene, effectively preserve the packing structures of solvent-evacuated MOCs while preventing cage agglomeration. The resulting MOCs exhibit an exceptional N2 sorption capacity, with a high surface area (SBET = 1934 m2 g-1 for MOP-23), which is among the highest reported for porous MOCs. Intriguingly, while the solvothermal treatment reduced Cu(II) to Cu(I) in the Cu-paddlewheel clusters, the MOCs with mixed-valenced Cu(I)/Cu(II) maintained their crystallinity and permanent porosity. The catalytic activities of these MOCs are successfully examined in copper(I)-catalyzed hydrative amide synthesis, highlighting the prospect of MOCs as versatile reaction platforms.

Giant oligomeric porous cage-based molecules

Most reported porous materials are either extended networks or monomeric discrete cavities; indeed, porous structures of intermediate size have scarcely been explored. Herein, we present the stepwise linkage of discrete porous metal-organic cages or polyhedra (MOPs) into oligomeric structures with a finite number of MOP units. The synthesis of these new oligomeric porous molecules entails the preparation of 1-connected (1-c) MOPs with only one available azide reactive site on their surface. The azide-terminated 1-c MOP is linked through copper(i)-catalysed azide-alkyne cycloaddition click chemistry with additional alkyne-terminated 1-c MOPs, 4-c clusters, or 24-c MOPs to yield three classes of giant oligomeric molecules: dimeric, tetrameric, or satellite-like, respectively. Importantly, all the giant molecules that we synthesised are soluble in water and permanently porous in the solid state.

Humidity-Induced Self-Oscillating and Self-Healing Hypercrosslinked Metal-Organic Polyhedra Membranes

Designing autonomously oscillating materials is highly desirable for emerging smart material fields but challenging. Herein, a type of hypercrosslinked metal-organic polyhedra (HCMOPs) membranes formed by covalent crosslinking of boronic acid-modified Zr-based MOPs with polyvinyl alcohol (PVA) are rationally designed. In these membranes, MOPs serve as high-connectivity nodes and provide dynamic borate bonds with PVA in hypercrosslinked networks, which can be broken/formed reversibly upon the stimulus of water vapor. The humidity response characteristic of HCMOPs promotes their self-oscillating and self-healing properties. HCMOP membranes can realize a self-oscillating property above the water surface even after loading a cargo that is 1.5 times the weight of the membrane due to the fast adsorption and desorption kinetics. Finally, the HCMOP actuator can realize energy conversion from mechanical energy into electricity when coupled with a piezoelectric membrane. This work not only paves a new avenue to construct MOP-polymer hybrid materials but also expands the application scopes of MOPs for smart actuation devices.

Covalent Post-Synthetic Modification of Metal-Organic Cages: Concepts and Recent Progress

Metal-organic cages (MOCs) are supramolecular coordination complexes that have internal cavities for hosting guest molecules and exhibiting various properties. However, the functions of MOCs are limited by the choice of the building blocks. Post-synthetic modification (PSM) is a technique that can introduce new functional groups and replace existing ones on the MOCs without changing their geometry. Among many PSM methods, covalent PSM is a promising approach to modify MOCs with tailored structures and functions. Covalent PSM can be applied to either the internal cavity or the external surface of the MOCs, depending on the functionality expected to be customized. However, there are still some challenges and limitations in the field of covalent PSM of MOCs, such as the balance between the stability of MOCs and the harshness of organic reactions involved in covalent PSMs. This concept article introduces the organic reaction types involved in covalent PSM of MOCs, their new applications after modification, and summarizes and provides an outlook of this research field.

Highly defective ultra-small tetravalent MOF nanocrystals

The size and defects in crystalline inorganic materials are of importance in many applications, particularly catalysis, as it often results in enhanced/emerging properties. So far, applying the strategy of modulation chemistry has been unable to afford high-quality functional Metal-Organic Frameworks (MOFs) nanocrystals with minimized size while exhibiting maximized defects. We report here a general sustainable strategy for the design of highly defective and ultra-small tetravalent MOFs (Zr, Hf) crystals (ca. 35% missing linker, 4-6 nm). Advanced characterizations have been performed to shed light on the main factors governing the crystallization mechanism and to identify the nature of the defects. The ultra-small nanoMOFs showed exceptional performance in peptide hydrolysis reaction, including high reactivity, selectivity, diffusion, stability, and show emerging tailorable reactivity and selectivity towards peptide bond formation simply by changing the reaction solvent. Therefore, these highly defective ultra-small M(IV)-MOFs particles open new perspectives for the development of heterogeneous MOF catalysts with dual functions.

Statistical Distribution of Binary Ligands within Rhodium-Organic Octahedra Tunes Microporosity in Their Assemblies

Structure-porosity relationships for metal-organic polyhedra (MOPs) are hardly investigated because they tend to be amorphized after activation, which inhibits crystallographic characterization. Here, we show a mixed-ligand strategy to statistically distribute two distinct carbazole-type ligands within rhodium-based octahedral MOPs, leading to systematic tuning of the microporosity in the resulting amorphous solids.

Improving the gas sorption capacity in lantern-type metal-organic polyhedra by a scrambled cage method

The synthesis of multivariate metal-organic frameworks (MOFs) is a well-known method for increasing the complexity of porous frameworks. In these materials, the structural differences of the ligands used in the synthesis are sufficiently subtle that they can each occupy the same site in the framework. However, multivariate or ligand scrambling approaches are rarely used in the synthesis of porous metal-organic polyhedra (MOPs) - the molecular equivalent of MOFs - despite the potential to retain a unique intrinsic pore from the individual cage while varying the extrinsic porosity of the material. Herein we directly synthesise scrambled cages across two families of lantern-type MOPs and find contrasting effects on their gas sorption properties. In one family, the scrambling approach sees a gradual increase in the BET surface area with the maximum and minimum uptakes associated with the two pure homoleptic cages. In the other, the scrambled materials display improved surface areas with respect to both of the original, homoleptic cages. Through analysis of the gas sorption isotherms, we attribute this effect to the balance of micro- and mesoporosity within the materials, which varies as a result of the scrambling approach. The gas uptake of the materials presented here underscores the tunability of cages that springs from their combination of intrinsic, extrinsic, micro- and meso-porosities.

2D Materials Nanoarchitectonics for 3D Structures/Functions

It has become clear that superior material functions are derived from precisely controlled nanostructures. This has been greatly accelerated by the development of nanotechnology. The next step is to assemble materials with knowledge of their nano-level structures. This task is assigned to the post-nanotechnology concept of nanoarchitectonics. However, nanoarchitectonics, which creates intricate three-dimensional functional structures, is not always easy. Two-dimensional nanoarchitectonics based on reactions and arrangements at the surface may be an easier target to tackle. A better methodology would be to define a two-dimensional structure and then develop it into a three-dimensional structure and function. According to these backgrounds, this review paper is organized as follows. The introduction is followed by a summary of the three issues; (i) 2D to 3D dynamic structure control: liquid crystal commanded by the surface, (ii) 2D to 3D rational construction: a metal-organic framework (MOF) and a covalent organic framework (COF); (iii) 2D to 3D functional amplification: cells regulated by the surface. In addition, this review summarizes the important aspects of the ultimate three-dimensional nanoarchitectonics as a perspective. The goal of this paper is to establish an integrated concept of functional material creation by reconsidering various reported cases from the viewpoint of nanoarchitectonics, where nanoarchitectonics can be regarded as a method for everything in materials science.

Pore-Networked Soft Materials Based on Metal-Organic Polyhedra

ConspectusThe last two decades have witnessed a tremendous development of crystalline microporous adsorbents in a wide range of applications including molecular adsorption, storage and separation, purification, as well as catalysis. The main players as porous materials that have contributed to the developments are extended molecular frameworks (e.g., metal-organic frameworks, MOFs; covalent-organic frameworks, COFs) or discrete porous molecules (e.g., metal-organic cages, MOCs; porous organic cages, POCs) thanks to the high degrees of freedom in their structural designability and tunability. To overcome the processability issue originating from their powder forms after synthesis, one main strategy is to hybridize the microporous adsorbents as pore-containing fillers with solvents or polymers as processable matrices to produce porous soft materials, such as porous liquids, gels/aerogels, and mixed-matrix membranes, depending on the form of matrix used. Nevertheless, the fabrication of "ideal" hybrid materials relies on the homogeneous distribution of the pore-containing fillers within the matrices. It is still challenging to find a versatile way to solve the aggregation issues of fillers and their insufficient interaction with the matrices, which are concerned with inhibiting the translation of the distinctive properties of microporous adsorbents into the obtained hybrid soft materials.Herein, we describe a new bottom-up approach for the fabrication of "pore-networked soft materials" based on the concept of directly interconnecting the pore-containing fillers into a continuous pore network within the matrices. The advantages of the pore-networking strategy lie in two main aspects: (i) the elimination of the need to struggle with the aggregation issue of fillers due to their overall interconnection throughout the matrices; (ii) the generation of continuous pore networks that guarantee the efficient molecular mass transfer in the materials. In this Account, we summarize our state-of-the-art progress of pore-networked soft materials based on the use of MOCs, alternatively called metal-organic polyhedra (MOPs) herein, as pore units for the pore network construction. The good solubility of MOPs in organic solvents allows them to be feasibly processed in solution, wherein the coordination of MOPs with organic linkers leads to the formation of linked MOP gels featuring not only intrinsic MOP cavities but also tunable extrinsic porosities generated between linked MOPs through the control of MOP/linker structures and network connectivity. Furthermore, the matrix of the linked MOP network, here referred to as the continuous phase with respect to the entire porous MOP network, is not limited to the solvents. We anticipate that the implementation of air, liquids, and polymers as the matrices could result in different forms of pore-networked soft materials like aerogels, foams, gels, monoliths, and membranes. For instance, we demonstrate the fabrication of linked MOP aerogel and permanently porous gel with their potential applications on selective CO2 photoreduction and gas sorption, respectively. We believe that the pore-network strategies will advance the development of porous soft materials featuring unique advantages and properties beyond the current hybrid systems.

Recent progress in iodine capture by macrocycles and cages

The effective capture of radioiodine is vital to the development of the nuclear industry and ecological environmental protection. There is, therefore, a continuously growing research exploration in various types of solid-state materials for iodine capture. During the last decade, the potential of using macrocycle and cage-based supramolecular materials in effective uptake and separation of radioactive iodine has been demonstrated. Interest in the application of these materials in iodine capture originates from their diversified porous characteristics, abundant host-guest chemistry, high iodine affinity and adsorption capacity, high stability in various environments, facile modification and functionalization, and intrinsic structural flexibility, among other attributes. Herein, recent progress in macrocycle and cage-based solid-state materials, including pure discrete macrocycles and cages, and their polymeric forms, for iodine capture is summarized and discussed with an emphasis on iodine capture capacities, mechanisms, and design strategies.

Materials Nanoarchitectonics at Dynamic Interfaces: Structure Formation and Functional Manipulation

The next step in nanotechnology is to establish a methodology to assemble new functional materials based on the knowledge of nanotechnology. This task is undertaken by nanoarchitectonics. In nanoarchitectonics, we architect functional material systems from nanounits such as atoms, molecules, and nanomaterials. In terms of the hierarchy of the structure and the harmonization of the function, the material created by nanoarchitectonics has similar characteristics to the organization of the functional structure in biosystems. Looking at actual biofunctional systems, dynamic properties and interfacial environments are key. In other words, nanoarchitectonics at dynamic interfaces is important for the production of bio-like highly functional materials systems. In this review paper, nanoarchitectonics at dynamic interfaces will be discussed, looking at recent typical examples. In particular, the basic topics of "molecular manipulation, arrangement, and assembly" and "material production" will be discussed in the first two sections. Then, in the following section, "fullerene assembly: from zero-dimensional unit to advanced materials", we will discuss how various functional structures can be created from the very basic nanounit, the fullerene. The above examples demonstrate the versatile possibilities of architectonics at dynamic interfaces. In the last section, these tendencies will be summarized, and future directions will be discussed.

Chiral metal-organic cages decorated with binaphthalene moieties

The construction of chiral nanoobjects with atomically precise nanostructures has attracted much more attention in the past decades. However, this field is still in its early stages. We designed and synthesized a series of chiral ligands containing the binaphthalene moiety and isophthalate module. Then, four chiral metal-organic cages (MOCs) were obtained through the coordination between isophthalate modules and copper ions. These chiral MOCs exhibit discrete, uniform and stable structures, good solubility and photoluminescence behaviors.

Metallosupramolecular polymers: current status and future prospects

Metallo-supramolecular polymers have gained increasing attention and witnessed continuous development as a vibrant new research interest in the domain of soft materials. These nonconventional polymers have found widespread application in materials and biology owing to their well-defined and diversified topologies and the distinct dynamic nature of the metallosupramolecular interactions against various stimuli. Because of the intriguing redox, photonic, electronic, and magnetic properties, these stimuli-responsive supramolecular structures have attracted considerable interest for optoelectronic device fabrication. However, it still remains challenging to develop stimuli responsive systems with offbeat applications. Furthermore, achieving spatiotemporal control remains elusive with thermoresponsive and sono-responsive metallosupramolecular polymers, which encounter the disadvantage of poor precision control. Additionally, controlling the morphology of these soft materials on the mesoscale, both in solution and on substrates, has many challenges. In this review, we discuss the recent developments and future directions for the construction of stimuli responsive metallosupramolecular systems targeting practical applications. Furthermore, we discuss the synthetic methodologies that have been used to regulate the mesoscale morphology of these materials, such as coordination modulation and pseudomorphic replication. Finally, we briefly cover the burgeoning field of programmed synthesis of metallosupramolecular polymers, emphasizing techniques, such as living polymerization and chemical fuel-driven transiently active systems, which we believe will be the major research directions in the future.

Imparting structural robustness of metal-organic cages based on oxo-dimolybdenum clusters

A family of robust and stable molybdenum-based metal-organic cages have been obtained based on the [Mo2O2(μ2-O)2]2+ secondary building unit. The resulting cages are decorated with different pyrdine derivatives that impart structural stability, resulting in the structural elucidation of the activated cage with single-crystal diffraction. The chemical robustness of the cage is also demonstrated by the post-synthetic modification of the cage, which allows the exchange of the pyridine derivatives without rupture of the cage.

Efficient water-based purification of metal-organic polyhedra by centrifugal ultrafiltration

An efficient water-based purification strategy for metal-organic polyhedra (MOPs) using commercially available centrifugal ultrafiltration membranes was developed. Having a diameter above 3 nm, MOPs were almost fully retained by the filters, while free ligands and other impurities were washed away. MOP retention also enabled efficient counter-ion exchange. This method paves the way for the application of MOPs with biological systems.

Dynamic Cages-Towards Nanostructured Smart Materials

The interest in capsular assemblies such as dynamic organic and coordination cages has blossomed over the last decade. Given their chemical and structural variability, these systems have found applications in diverse fields of research, including energy conversion and storage, catalysis, separation, molecular recognition, and live-cell imaging. In the exploration of the potential of these discrete architectures, they are increasingly being employed in the formation of more complex systems and smart materials. This Review highlights the most promising pathways to overcome common drawbacks of cage systems (stability, recovery) and discusses the most promising strategies for their hybridization with systems featuring various dimensionalities. Following the description of the most recent advances in the fabrication of zero to three-dimensional cage-based systems, this Review will provide the reader with the structure-dependent relationship between the employed cages and the properties of the materials.

Creating Order in Ultrastable Phosphonate Metal-Organic Frameworks via Isolable Hydrogen-Bonded Intermediates

The stability presented by trivalent metal-organic frameworks (MOFs) makes them an attractive class of materials. With phosphonate-based ligands, crystallization is a challenge, as there are significantly more binding motifs that can be adopted due to the extra oxygen tether compared to carboxylate counterparts and the self-assembly processes are less reversible. Despite this, we have reported charge-assisted hydrogen-bonded metal-organic frameworks (HMOFs) consisting of [Cr(H2O)6]3+ and phosphonate ligands, which were crystallographically characterized. We sought to use these HMOFs as a crystalline intermediate to synthesize ordered Cr(III)-phosphonate MOFs. This can be done by dehydrating the HMOF to remove the aquo ligands around the Cr(III) center, forcing metal-phosphonate coordination. Herein, a new porous HMOF, H-CALF-50, is synthesized and then dehydrated to yield the MOF CALF-50. CALF-50 is ordered, although it is not single crystalline. It does, however, have exceptional stability, maintaining crystallinity and surface area after boiling in water for 3 weeks and soaking in 14.5 M H3PO4 for 24 h and 9 M HCl for 72 h. Computational methods are used to study the HMOF to MOF transformation and give insight into the nature of the structure and the degree of heterogeneity.

Porous supramolecular gels produced by reversible self-gelation of ruthenium-based metal-organic polyhedra

Supramolecular gels based on metal-organic polyhedra (MOPs) represent a versatile platform to access processable soft materials with controlled porosity. Herein, we report a self-gelation approach that allows the reversible assembly of a novel Ru-based MOP in the form of colloidal gels. The presence of cationic mixed-valence [Ru2(COO)4]+ paddlewheel units allows for modification of the MOP charge via acid/base treatment, and therefore, its solubility. This feature enables control over supramolecular interactions, making it possible to reversibly force MOP aggregation to form nanoparticles, which further assemble to form a colloidal gel network. The gelation process was thoroughly investigated by time-resolved ζ-potential, pH, and dynamic light scattering measurements. This strategy leads to the evolution of hierarchically porous aerogel from individual MOP molecules without using any additional component. Furthermore, we demonstrate that the simplicity of this method can be exploited for the obtention of MOP-based gels through a one-pot synthetic approach starting from MOP precursors.

Cofacial porphyrin organic cages. Metals regulating excitation electron transfer and CO2 reduction electrocatalytic properties

Herein, we introduce a comprehensive study of the photophysical behaviors and CO2 reduction electrocatalytic properties of a series of cofacial porphyrin organic cages (CPOC-M, M = H2, Co(ii), Ni(ii), Cu(ii), Zn(ii)), which are constructed by the covalent-bonded self-assembly of 5,10,15,20-tetrakis(4-formylphenyl)porphyrin (TFPP) and chiral (2-aminocyclohexyl)-1,4,5,8-naphthalenetetraformyl diimide (ANDI), followed by post-synthetic metalation. Electronic coupling between the TFPP donor and naphthalene-1,4 : 5,8-bis(dicarboximide) (NDI) acceptor in the metal-free cage is revealed to be very weak by UV-vis spectroscopic, electrochemical, and theoretical investigations. Photoexcitation of CPOC-H2, as well as its post-synthetic Zn and Co counterparts, leads to fast energy transfer from the triplet state porphyrin to the NDI unit according to the femtosecond transient absorption spectroscopic results. In addition, CPOC-Co enables much better electrocatalytic activity for CO2 reduction reaction than the other metallic CPOC-M (M = Ni(ii), Cu(ii), Zn(ii)) and monomeric porphyrin cobalt compartment, supplying a partial current density of 18.0 mA cm-2 at -0.90 V with 90% faradaic efficiency of CO.

Potential of nonporous adaptive crystals for hydrocarbon separation

Hydrocarbon separation is an important process in the field of petrochemical industry, which provides a variety of raw materials for industrial production and a strong support for the development of national economy. However, traditional separation processes involve huge energy consumption. Adsorptive separation based on nonporous adaptive crystal (NAC) materials is considered as an attractive green alternative to traditional energy-intensive separation technologies due to its advantages of low energy consumption, high chemical and thermal stability, excellent selective adsorption and separation performance, and outstanding recyclability. Considering the exceptional potential of NAC materials for hydrocarbon separation, this review comprehensively summarizes recent advances in various supramolecular host-based NACs. Moreover, the current challenges and future directions are illustrated in detail. It is expected that this review will provide useful and timely references for researchers in this area. Based on a large number of state-of-the-art studies, the review will definitely advance the development of NAC materials for hydrocarbon separation and stimulate more interesting studies in related fields.

Five Porous Complexes Constructed from a Racemic Ligand: Synthesis, Chiral Self-Assembly, Iodine Adsorption, and Desorption Properties

Herein, a chiral bispyridyl ligand (L) was designed and synthesized using a Schiff base condensation reaction, followed by a 1,3-H shift. Five complexes, [Zn₂L₂(OAc)₄] (1), {[CdLCl₂(DMF)]·4H₂O}_n (2), [Cd₂L₂I₄]·4H₂O (3), {[CdL₂(H₂O)₂](NO₃)₂·2CH₃OH}_n (4), and [Hg₂L₂Cl₄]·2DMF (5), were synthesized and characterized upon its reaction with Zn(II), Cd(II), or Hg(II) ions, respectively. X-ray crystallography shows that the organic compound exists as a racemic ligand with equal amounts of its R- and S-isomers, and all of the synthesized complexes exhibit heterochiral self-assembly via a chiral self-discrimination process. Complexes 1, 3, and 5 exist as centrosymmetric binuclear metallamacrocycles, while complexes 2 and 4 exist as 1D looped-chain coordination polymers. Inspired by the assembled structures of the five complexes, I₂ adsorption/desorption measurements for the complexes were carried out. The results show that complexes 1 and 5 exhibit good adsorption capacities toward I₂ in n-hexane and in water, respectively.

Water-Soluble Ionic Metal-Organic Polyhedra as a Versatile Platform for Enzyme Bio-immobilization

Metal-organic polyhedra (MOPs) can act as elementary structural units for the design of modular porous materials; however, their association with biological systems remains greatly restricted by their typically low stabilities and solubilities in water. Herein, we describe the preparation of novel MOPs bearing either anionic or cationic groups and exhibiting a high affinity for proteins. Simple mixing of the protein bovine serum albumin (BSA) and ionic MOP aqueous solutions resulted in the spontaneous formation of MOP-protein assemblies, in a colloidal state or as solid precipitates depending on the initial mixing ratio. The versatility of the method was further illustrated using two enzymes, catalase and cytochrome c, with different sizes and isoelectric points (pI's) below and above 7. This mode of assembly led to the high retention of catalytic activity and enabled recyclability. Furthermore, the co-immobilization of cytochrome c with highly charged MOPs resulted in a substantial 44-fold increase of its catalytic activity.

Stacking Lanthanide-MOF Thin Films to Yield Highly Sensitive Optical Thermometers

Easy-to-integrate, remote read-out thermometers with fast response are of huge interest in numerous application fields. In the context of optical read-out devices, sensors based on the emission of lanthanides (Eu(III), Tb(III)) are particularly promising. Here, by using a layer-by-layer (LbL) approach in the liquid-phase epitaxy process, a series of continuous, low-thickness lanthanide-MIL-103 SURMOFs were fabricated to yield highly sensitive thermometers with optical readout. These Ln-SURMOFs exhibit remarkable temperature-sensing photoluminescence behavior, which can be read out using the naked eye. High transmittance is realized as well by precisely controlling the film thickness and the quality of these Ln-SURMOF thermometers. Moreover, we demonstrate that the thermal sensitivity can be improved in the temperature regime above 120 K, by controlling the energy transfer between Tb(III) and Eu(III). This performance is achieved by employing a sophisticated supramolecular architecture, namely MOF-on-MOF heteroepitaxy.

Direct synthesis of amorphous coordination polymers and metal–organic frameworks

Coordination polymers (CPs) and their subset, metal-organic frameworks (MOFs), can have porous structures and hybrid physicochemical properties that are useful for diverse applications. Although crystalline CPs and MOFs have received the most attention to date, their amorphous states are of growing interest as they can be directly synthesized under mild conditions. Directly synthesized amorphous CPs (aCPs) can be constructed from a wider range of metals and ligands than their crystalline and crystal-derived counterparts and demonstrate numerous unique material properties, such as higher mechanical robustness, increased stability and greater processability. This Review examines methods for the direct synthesis of aCPs and amorphous MOFs, as well as their properties and characterization routes, and offers a perspective on the opportunities for the widespread adoption of directly synthesized aCPs.

Atomistic simulation of soft porous coordination polymers

Soft porous coordination polymers (SPCPs) are materials with exceptional potential because of their ability to incorporate the properties of nominally rigid porous materials like metal-organic frameworks (MOFs) and those of soft matter, such as polymers of intrinsic microporosity (PIMs). This combination could offer the gas adsorption properties of MOFs together with the mechanical stability and processability of PIMs, opening up a space of flexible, highly responsive adsorbing materials. In order to understand their structure and behavior, we present a process for the construction of amorphous SPCPs from secondary building blocks. We then use classical molecular dynamics simulations to characterize the resulting structures based on branch functionalities (f), pore size distributions (PSDs), and radial distribution functions and compare them to experimentally synthesized analogs. In the course of this comparison, we demonstrate that the pore structure of SPCPs is due to both pores intrinsic to the secondary building blocks, and intercolloid spacing between colloid particles. We also illustrate the differences in nanoscale structure based on linker length and flexibility, particularly in the PSDs, finding that stiff linkers tend to produce SPCPs with larger maximum pore sizes.

Metallic–Organic Cages (MOCs) with Heterometallic Character: Flexibility-Enhancing MOFs

The dichotomy between metal–organic frameworks (MOFs) and metal–organic cages (MOCs) opens up the research spectrum of two fields which, despite having similarities, both have their advantages and disadvantages. Due to the fact that they have cavities inside, they also have applicability in the porosity sector. Bloch and coworkers within this evolution from MOFs to MOCs manage to describe a MOC with a structure of Cu2 paddlewheel Cu4L4 (L = bis(pyrazolyl)methane) with high precision thanks to crystallographic analyses of X-ray diffraction and also SEM-EDX. Then, also at the same level of concreteness, they were able to find the self-assembly of Pd(II)Cl2 moieties on the available nitrogen donor atoms leading to a [Cu4(L(PdCl2))4] structure. Here, calculations of the DFT density functional allow us to reach an unusual precision given the magnitude and structural complexity, explaining how a pyrazole ring of each bis(pyprazolyl)methane ligand must rotate from an anti to a syn conformation, and a truncation of the MOC structure allows us to elucidate, in the absence of the MOC constraint and its packing in the crystal, that the rotation is almost barrierless, as well as also explain the relative stability of the different conformations, with the anti being the most stable conformation. Characterization calculations with Mayer bond orders (MBO) and noncovalent interaction (NCI) plots discern what is important in the interaction of this type of cage with PdCl2 moieties, also CuCl2 by analogy, as well as simple molecules of water, since the complex is stable in this solvent. However, the L ligand is proved to not have the ability to stabilize an H2O molecule.

X-H Bond Insertion Promoted by Heterogeneous Dirhodium Metal-Organic Cage with Alkynes as Safe Carbene Precursors

A facile and efficient methodology for the generation of the C-X (X = Si, B) bond through a carbene insertion process was demonstrated using a dirhodium metal-organic cage, MOC-Rh-1, as a heterogeneous catalyst. A series of functionalized alkynes were utilized as safe carbene precursors to furnish Si-H and B-H insertion products in moderate to excellent yields. These reactions featured a high atom-economy, a broad substrate scope, and mild reaction conditions. Moreover, the as-prepared MOC-Rh-1 catalyst was recovered easily from the reaction system by simple centrifugation and reused for ten runs without a significant loss in activity, which made good use of the valuable precious metal rhodium.

SO2 capture and detection using a Cu(II)-metal-organic polyhedron

The SO₂ adsorption-desorption capacity at room temperature and 1 bar of the metal-organic polyhedron MOP-CDC was investigated. In addition, the qualitative solid-state absorption-emission properties of this material (before and after SO₂ exposure) were measured and tested, and it demonstrated remarkable capability for SO₂ detection. Our results represent the first example of fluorimetric SO₂ detection in a MOP.

Complementarity and Preorganisation in the Assembly of Heterometallic–Organic Cages via the Metalloligand Approach—Recent Advances

The design of new metallocage polyhedra towards pre-determined structures can offer both practical as well as intellectual challenges. In this mini-review we discuss a selection of recent examples in which the use of the metalloligand approach has been employed to overcome such challenges. An attractive feature of this approach is its stepwise nature that lends itself to the design and rational synthesis of heterometallic metal–organic cages, with the latter often associated with enhanced functionality.

Densest plane group packings of regular polygons

Packings of regular convex polygons (n-gons) that are sufficiently dense have been studied extensively in the context of modeling physical and biological systems as well as discrete and computational geometry. Former results were mainly regarding densest lattice or double-lattice configurations. Here we consider all two-dimensional crystallographic symmetry groups (plane groups) by restricting the configuration space of the general packing problem of congruent copies of a compact subset of the two-dimensional Euclidean space to particular isomorphism classes of the discrete group of isometries. We formulate the plane group packing problem as a nonlinear constrained optimization problem. By means of the Entropic Trust Region Packing Algorithm that approximately solves this problem, we examine some known and unknown densest packings of various n-gons in all 17 plane groups and state conjectures about common symmetries of the densest plane group packings for every n-gon.

Reversible Discrete-to-Extended Metal-Organic Polyhedra Transformation by Sulfonic Acid Surface Functionalization

Metal-organic polyhedra (MOPs) are molecular porous units in which desired functionalities can be installed with precise geometrical and compositional control. By combing two complementary chemical moieties, such as sulfonic acid groups and Rh(II)-carboxylate paddlewheel, we synthesized a robust water-soluble cuboctahedral MOP with excellent features in both solution and solid states. Herein, we demonstrate that the superior chemical stability of the Rh₂ unit and the elevated number of functional groups on the surface (24 per cage) result in a porous cage with high solubility and stability in water, including acidic, neutral, and basic pH conditions. We also prove that the sulfonic acid-rich form of the cage can be isolated through postsynthetic acid treatment. This transformation involves an improved gas uptake capacity and the capability to reversibly assemble the cages into a three-dimensional (3D) metal-organic framework (MOF) structure. Likewise, this sulfonic acid functionalization provides both MOP and MOF solids with high proton conductivities (>10^-3 S cm^-1), comparable to previously reported high conducting metal-organic materials. The influence of the MOP-to-MOF processing in the gas adsorption capacity indicates that this structural transformation can provide materials with higher and more controllable porous properties. These results illustrate the high potential of acidic MOPs as more flexible porous building units in terms of processability, structural complexity, and tunability of the properties.

Assembly of a Heterometallic Cu(II)-Pd(II) Cage by Post-assembly Metal Insertion

Porous structures based on multi-metallic motifs are receiving growing interest, but their general preparation still remains a challenge. Here, we report the self-assembly and structure of a Cu^II metal-organic cage (MOC) that is functionalized with free bis(pyrazolyl)methane sites. The homometallic Cu₄L₄ cage is isolated as a water-stable crystalline solid, and its formation is dependent on metal-ligand stoichiometry and the pre-organization of the Cu₂ paddlewheel. We show by X-ray diffraction and SEM-EDX that Pd^II chloride can be quantitatively inserted into the free chelating sites of the MOC to yield a [Cu₄(L(PdCl₂))₄] structure. Moreover, the solvent employed in the metalation dictates the solid-state isomerism of the heterometallic cage─a further handle to control the MOC's structural diversity and permanent porosity.

Confined Construction of Ultrasmall Molybdenum Disulfide-Loaded Porous Silica Particles for Efficient Tumor Therapy

Recently, molybdenum sulfide (MoS₂) has shown great application potential in tumor treatment because of its good photothermal properties. Unfortunately, most of the current molybdenum disulfide-based nanotherapeutic agents suffer from complex preparation processes, low photothermal conversion efficiencies, and poor structural/compositional regulation. To address these issues, in this paper, a facile "confined solvothermal" method is proposed to construct an MoS²-loaded porous silica nanosystem (designated as MoS₂@P-hSiO₂). The maximum photothermal efficiency of 79.5% of molybdenum-based materials reported in the literature at present was obtained due to the ultrasmall MoS₂ nanoclusters and the rich porous channels. Furthermore, both in vitro and in vivo experiments showed that the cascade hybrid system (MoS₂/GOD@P-hSiO₂) after efficient loading of glucose oxidase (GOD) displayed a significant tumor-suppressive effect and good biosafety through the combined effects of photothermal and enzyme-mediated cascade catalytic therapy. Consequently, this hybrid porous network system combining the in situ solvothermal strategy of inorganic functional components and the efficient encapsulation of organic enzyme macromolecules can provide a new pathway to construct synergistic agents for the efficient and safe treatment of tumors.

Advances in the Structural Strategies of the Self-Assembly of Photoresponsive Supramolecular Systems

Photosensitive supramolecular systems have garnered attention due to their potential to catalyze highly specific tasks through structural changes triggered by a light stimulus. The tunability of their chemical structure and charge transfer properties provides opportunities for designing and developing smart materials for multidisciplinary applications. This review focuses on the approaches reported in the literature for tailoring properties of the photosensitive supramolecular systems, including MOFs, MOPs, and HOFs. We discuss relevant aspects regarding their chemical structure, action mechanisms, design principles, applications, and future perspectives.

Influence of the Surface Chemistry of Metal-Organic Polyhedra in Their Assembly into Ultrathin Films for Gas Separation

The formation of ultrathin films of Rh-based porous metal-organic polyhedra (Rh-MOPs) by the Langmuir-Blodgett method has been explored. Homogeneous and dense monolayer films were formed at the air-water interface either using two different coordinatively alkyl-functionalized Rh-MOPs (HRhMOP(diz)12 and HRhMOP(oiz)12) or by in situ incorporation of aliphatic chains to the axial sites of dirhodium paddlewheels of another Rh-MOP (OHRhMOP) at the air-liquid interface. All these Rh-MOP monolayers were successively deposited onto different substrates in order to obtain multilayer films with controllable thicknesses. Aliphatic chains were partially removed from HRhMOP(diz)12 films post-synthetically by a simple acid treatment, resulting in a relevant modification of the film hydrophobicity. Moreover, the CO2/N2 separation performance of Rh-MOP-supported membranes was also evaluated, proving that they can be used as selective layers for efficient CO2 separation.

Polymer networks of imine-crosslinked metal–organic cages: tuneable viscoelasticity and iodine adsorption

The solution-state structure of MOP-15 is elucidated, enabling its direct use as a porous monomer for covalent polymer networks.