Thermo-photo catalysis: a whole greater than the sum of its parts

Role of Atomicity and Interface on InOx-TiO2 Composites: Thermo-Photo Valorization of CO2

The synthesis, physicochemical, and functional properties of composite solids resulting from the surface spread of oxidized indium species onto nanoplatelets of anatase were investigated. Both the size and the interaction between the indium- and titanium-containing components control the functional properties. In the reduction of CO2 to CO, the best samples have an indium content between ca. 2 and 5 mol % and showed an excess rate over the photo and thermo-alone processes above 33% and an energy efficiency of 1.3%. Subnanometric (monomeric and dimeric) indium species present relatively weak thermal catalytic response but strong thermo-photo promotion of the activity. A gradual change in functional properties was observed with the growth of the indium content of the solids, leading to a progressive increase of thermal activity but lower thermo-photo promotion. The study provides a well-defined structure-activity relationship rationalizing the dual thermo-photo properties of the catalysts and establishes a guide for the development of highly active and stable composite solids for the elimination and valorization of CO2.

Hollow g-C3N4@Ag3PO4 Core-Shell Nanoreactor Loaded with Au Nanoparticles: Boosting Photothermal Catalysis in Confined Space

Low solar energy utilization efficiency and serious charge recombination remain major challenges for photocatalytic systems. Herein, a hollow core-shell Au/g-C3N4@Ag3PO4 photothermal nanoreactor is successfully prepared by a two-step deposition method. Benefit from efficient spectral utilization and fast charge separation induced by the unique hollow core-shell heterostructure, the H2 evolution rate of Au/g-C3N4@Ag3PO4 is 16.9 times that of the pristine g-C3N4, and the degradation efficiency of tetracycline is increased by 88.1%. The enhanced catalytic performance can be attributed to the ordered charge movement on the hollow core-shell structure and a local high-temperature environment, which effectively accelerates the carrier separation and chemical reaction kinetics. This work highlights the important role of the space confinement effect in photothermal catalysis and provides a promising strategy for the development of the next generation of highly efficient photothermal catalysts.

Photo-thermal Catalytic Hydrogenation of Halogenated Nitrobenzenes over Ni/P25 Catalyst

As haloanilines (HANs) are important organic intermediates and fine chemicals, their preparation over non-noble-metal-based catalysts by catalytic hydrogenation has attracted wide attention. However, the reaction suffers from relatively harsh conditions. Herein, we found that a 3.5%Ni/P25 catalyst exhibited superior photo-thermal catalytic activity with a TOFs of 5207 h-1 for hydrogenation of p-chloronitrobenzene (p-CNB) to p-chloroaniline under a 300 W full spectrum, which was much higher than that of photo- and thermal catalysis alone. Moreover, the 3.5%Ni/P25 catalyst could be recycled 4 times and was effective for the hydrogenation of various halonitrobenzenes (HNBs) with superior selectivity. Furthermore, the kinetic research showed that the excellent catalytic performance could be attributed to the better activation and dissociation of H2 by photo-thermal catalysis and the hydrogenation of p-CNB obeyed the condensation routine by ionic hydrogenation over 3.5%Ni/P25.

Solar-Driven Biomass Reforming for Hydrogen Generation: Principles, Advances, and Challenges

Hydrogen (H2) has emerged as a clean and versatile energy carrier to power a carbon-neutral economy for the post-fossil era. Hydrogen generation from low-cost and renewable biomass by virtually inexhaustible solar energy presents an innovative strategy to process organic solid waste, combat the energy crisis, and achieve carbon neutrality. Herein, the progress and breakthroughs in solar-powered H2 production from biomass are reviewed. The basic principles of solar-driven H2 generation from biomass are first introduced for a better understanding of the reaction mechanism. Next, the merits and shortcomings of various semiconductors and cocatalysts are summarized, and the strategies for addressing the related issues are also elaborated. Then, various bio-based feedstocks for solar-driven H2 production are reviewed with an emphasis on the effect of photocatalysts and catalytic systems on performance. Of note, the concurrent generation of value-added chemicals from biomass reforming is emphasized as well. Meanwhile, the emerging photo-thermal coupling strategy that shows a grand prospect for maximally utilizing the entire solar energy spectrum is also discussed. Further, the direct utilization of hydrogen from biomass as a green reductant for producing value-added chemicals via organic reactions is also highlighted. Finally, the challenges and perspectives of photoreforming biomass toward hydrogen are envisioned.

A Three-in-One Integrated Cs3Bi2Br9@Co3O4 Heterostructure with Photoinduced Self-Heating Effect for Synergistically Enhancing the Photothermal CO2 Reduction

Photothermal catalysis, which applies solar energy to produce photogenerated e-/h+ pairs as well as provide heat input, is recognized as a promising technology for high conversion efficiency of CO2 to value-added solar fuels. In this work, a "shooting three birds with one stone" approach is demonstrated to significantly enhance the photothermal CO2 reduction over the Cs3Bi2Br9@Co3O4 (CBB@Co3O4) heterostructure. Initially, Co3O4 with photoinduced self-heating effect serves as a photothermal material to elevate the temperature of the photocatalyst, which kinetically accelerates the catalytic reaction. Meanwhile, a p-n heterojunction is constructed between the p-type Co3O4 and n-type Cs3Bi2Br9 semiconductors, which has an intrinsic built-in electric field (BEF) to facilitate the separation of photogenerated e-/h+ pairs. Furthermore, the mesoporous Co3O4 matrix can afford abundant active sites for promoting adsorption/activation of CO2 molecules. Benefiting from these synergistic effects, the as-developed CBB@Co3O4 heterostructure achieves an impressive CO2-to-CO conversion rate of 168.56 µmol g-1 h-1 with no extra heat input. This work provides an insightful guidance for the construction of effective photothermal catalysts for CO2 reduction with high solar-to-fuel conversion efficiency.

Integration of photothermal water evaporation with photocatalytic microplastics upcycling via nanofluidic thermal management

Photothermal heating and photocatalytic treatment are two solar-driven water processing approaches by harnessing NIR and UV-vis light, respectively, which can fully utilize solar energy if integrated. However, it remains a challenge to achieve high performance in both approaches when integrated in a material due to uncontrollable heat diffusion. Here, we report a demonstration of heat confinement on photothermal sites and fluid cooling on photocatalysis sites at the nanoscale, within a well-designed heat and fluid confinement nanofiber reactor. Photothermal and photocatalytic nanostructures were alternatively aligned in electrospun nanofibers for on-demand nanofluidic thermal management as well as easy folding into 3D structures with enhanced light utilization and mass transfer. Such a design showed simultaneously high photothermal evaporation rate (2.59 kg m-2 h-1, exceeding the limit rate) and efficient photocatalytic upcycling of microplastics pollutant into valued products. Enabled by controlled photothermal heating, the valued main product (i.e., methyl acetate) can be evaporated out with 100% selectivity by in situ separation.

Precursor- and waste-free synthesis of spark-ablated nanoparticles with enhanced photocatalytic activity and stability towards airborne organic pollutant degradation

Photocatalyst synthesis typically involves multiple steps, expensive precursors, and solvents. In contrast, spark ablation offers a simple process of electrical discharges in a gap between two electrodes made from a desirable material. This enables a precursor- and waste-free generation of pure metal oxide nanoparticles or mixtures of various compositions. This study presents a two-step method for the production of photocatalytic filters with deposited airborne MnOx, TiO2, and ZnO nanoparticles using spark ablation and calcination processes. The resulting MnOx and TiO2 filters demonstrated almost twice the activity with outstanding performance stability, as compared to sol-gel MnO2 and commercial TiO2. The introduced method is not only simple, precursor- and waste-free, and leads to superior performance for the case studied, but it also has future potential due to its versatility. It can easily produce mixed and doped materials with further improved properties, making it an interesting avenue for future research.

Anti-Environmental Aging Passive Daytime Radiative Cooling

Passive daytime radiative cooling technology presents a sustainable solution for combating global warming and accompanying extreme weather, with great potential for diverse applications. The key characteristics of this cooling technology are the ability to reflect most sunlight and radiate heat through the atmospheric transparency window. However, the required high solar reflectance is easily affected by environmental aging, rendering the cooling ineffective. In recent years, significant advancements have been made in understanding the failure mechanisms, design strategies, and manufacturing technologies of daytime radiative cooling. Herein, a critical review on anti-environmental aging passive daytime radiative cooling with the goal of advancing their commercial applications is presented. It is first introduced the optical mechanisms and optimization principles of radiative cooling, which serve as a basis for further endowing environmental durability. Then the environmental aging conditions of passive daytime radiative cooling, mainly focusing on UV exposure, thermal aging, surface contamination and chemical corrosion are discussed. Furthermore, the developments of anti-environmental aging passive daytime radiative cooling materials, including design strategies, fabrication techniques, structures, and performances, are reviewed and classified for the first time. Last but not the least, the remaining open challenges and the insights are presented for the further promotion of the commercialization progress.

Metallic 1T phase molybdenum disulfide cocatalyst with abundant edge and substrate active sites for enhanced photocatalytic hydrogen production activity of zinc indium sulfide nanoflowers

The formation of composites by loading co-catalysts on semiconductor photocatalysts to improve hydrogen (H2) evolution performance is a feasible strategy. Metallic 1T phase molybdenum disulfide (MoS2) as cocatalysts were decorated on zinc indium sulfide (ZnIn2S4) nanoflowers by a grinding method to construct 1T-MoS2@ZnIn2S4 composites. The H2 production rate of 1T-MoS2@ZnIn2S4 composites with optimum 7 wt% 1T-MoS2 loading achieves 15.6 mmol g-1 h-1, 5.5 times higher than ZnIn2S4 nanoflowers. The apparent quantum efficiency (AQY) increases from 3.1 % (ZnIn2S4 nanoflowers) to 13.0 % (1T-MoS2@ZnIn2S4 composites) under the wavelength light irradiation at λ = 370 nm. The loading of metallic 1T-MoS2 with abundant edge and substrate active sites on ZnIn2S4 can enhance visible light absorption, promote the transfer of electrons, and inhibit carrier recombination, thereby improving photocatalytic performance. This work offers inspiration for the design of composite photocatalysts with efficient photocatalytic capabilities.

Thermo-photo catalytic anode process for carbonate-superstructured solid fuel cells

Converting hydrocarbons and greenhouse gases (i.e., carbon dioxide, CO2) directly into electricity through fuel cells at intermediate temperatures (450 to 550 °C) remains a significant challenge, primarily due to the sluggish activation of C-H and C=O bonds. Here, we demonstrated a unique strategy to address this issue, in which light illumination was introduced into the thermal catalytic CO2 reforming of ethane in the anode as a unique thermo-photo anode process for carbonate-superstructured solid fuel cells. The light-enhanced fuel activation led to excellent cell performance with a record-high peak power density of 168 mW cm-2 at an intermediate temperature of 550 °C. Furthermore, no degradation was observed during ~50 h operation. Such a successful integration of photo energy into the fuel cell system provides a new direction for the development of efficient fuel cells.

Advances in photothermal regulation strategies: from efficient solar heating to daytime passive cooling

Photothermal regulation concerning solar harvesting and repelling has recently attracted significant interest due to the fast-growing research focus in the areas of solar heating for evaporation, photocatalysis, motion, and electricity generation, as well as passive cooling for cooling textiles and smart buildings. The parallel development of photothermal regulation strategies through both material and system designs has further improved the overall solar utilization efficiency for heating/cooling. In this review, we will review the latest progress in photothermal regulation, including solar heating and passive cooling, and their manipulating strategies. The underlying mechanisms and criteria of highly efficient photothermal regulation in terms of optical absorption/reflection, thermal conversion, transfer, and emission properties corresponding to the extensive catalog of nanostructured materials are discussed. The rational material and structural designs with spectral selectivity for improving the photothermal regulation performance are then highlighted. We finally present the recent significant developments of applications of photothermal regulation in clean energy and environmental areas and give a brief perspective on the current challenges and future development of controlled solar energy utilization.

The Mars-Van Krevelen cycle and non-noble metal Ni jointly promoting Z-scheme charge transfer: a study on the photothermal synergy effect applied in selectively oxidizing aromatic alcohols

Photothermal catalysis is a promising method for selectively oxidizing organic compounds, effectively addressing the energy-intensive and low-selective processes of thermal catalysis, as well as the slow reaction rates of photocatalysis. In this study, a ternary photothermal catalyst, Ni/CeO2/CdS, was synthesized using a simple calcination and solvothermal method. The catalyst demonstrated remarkable improvement in reaction rates and achieved nearly 100% selectivity in converting benzyl alcohol to benzaldehyde through photothermal catalysis at normal pressure. The reaction rates were 5.9 times and 63 times higher than those of CdS and Ni/CeO2 individually. XPS analysis confirmed that the thermal catalysis followed the Mars-Van Krevelen (MVK) mechanism and also proved that photocatalysis facilitated the MVK cycle. Additionally, DFT calculations showed that Ni acted as an electron transfer channel, facilitating efficient Z-scheme charge transfer. The in situ infrared technique was used to dynamically monitor the reaction process and explain the high selectivity of the product. Furthermore, detailed explanations of photocatalysis, thermocatalysis, and photothermal synergistic catalysis were proposed based on the aforementioned characterization and theoretical calculations. This approach establishes a theoretical foundation for the development of efficient photothermal catalysts.

MOF-Derived Spindle-Shaped Z-Scheme ZnO/ZnFe2O4 Heterojunction: A Magnetic Recovery Catalyst for Efficient Photothermal Degradation of Tetracycline Hydrochloride

The development of photocatalysts with a wide spectral response and effective carrier separation capability is essential for the green degradation of tetracycline hydrochloride. In this study, a magnetic recyclable Z-scheme ZnO/ZnFe2O4 heterojunction (ZZF) was successfully constructed via the solid phase method, using MIL-88A(Fe)@Zn as the precursor. An appropriate band gap width and Z-scheme charge transfer mechanism provide ZZF with excellent visible light absorption performance, efficient charge separation, and a strong redox ability. Under visible light irradiation, the degradation efficiency of tetracycline hydrochloride for the optimal sample can reach 86.3% within 75 min in deionized water and 92.9% within 60 min in tap water, exhibiting superior stability and reusability after five cycles. Moreover, the catalyst in the water can be conveniently recovered by magnetic force. After visible light irradiation for 70 min, the temperature of the reaction system increased by 21.9 °C. Its degradation constant (35.53 × 10-3 min-1) increased to 5.1 times that at room temperature (6.95 × 10-3 min-1). Using thermal energy enhances the kinetic driving force of the reactants and facilitates carrier migration, meaning that more charge is available for the production of •O2- and •OH. This study provides a potential candidate for the efficient degradation of tetracycline hydrochloride by combining thermal catalysis with a photocatalytic heterojunction.

Light-Reinforced Key Intermediate for Anticoking To Boost Highly Durable Methane Dry Reforming over Single Atom Ni Active Sites on CeO2

Dry reforming of methane (DRM) has been investigated for more than a century; the paramount stumbling block in its industrial application is the inevitable sintering of catalysts and excessive carbon emissions at high temperatures. However, the low-temperature DRM process still suffered from poor reactivity and severe catalyst deactivation from coking. Herein, we proposed a concept that highly durable DRM could be achieved at low temperatures via fabricating the active site integration with light irradiation. The active sites with Ni-O coordination (NiSA/CeO2) and Ni-Ni coordination (NiNP/CeO2) on CeO2, respectively, were successfully constructed to obtain two targeted reaction paths that produced the key intermediate (CH3O*) for anticoking during DRM. In particular, the operando diffuse reflectance infrared Fourier transform spectroscopy coupling with steady-state isotopic transient kinetic analysis (operando DRIFTS-SSITKA) was utilized and successfully tracked the anticoking paths during the DRM process. It was found that the path from CH3* to CH3O* over NiSA/CeO2 was the key path for anticoking. Furthermore, the targeted reaction path from CH3* to CH3O* was reinforced by light irradiation during the DRM process. Hence, the NiSA/CeO2 catalyst exhibits excellent stability with negligible carbon deposition for 230 h under thermo-photo catalytic DRM at a low temperature of 472 °C, while NiNP/CeO2 shows apparent coke deposition behavior after 0.5 h in solely thermal-driven DRM. The findings are vital as they provide critical insights into the simultaneous achievement of low-temperature and anticoking DRM process through distinguishing and directionally regulating the key intermediate species.

Efficient, Formal, Material, and Final Causes in Biology and Technology

This paper considers how a classification of causal effects as comprising efficient, formal, material, and final causation can provide a useful understanding of how emergence takes place in biology and technology, with formal, material, and final causation all including cases of downward causation; they each occur in both synchronic and diachronic forms. Taken together, they underlie why all emergent levels in the hierarchy of emergence have causal powers (which is Noble's principle of biological relativity) and so why causal closure only occurs when the upwards and downwards interactions between all emergent levels are taken into account, contra to claims that some underlying physics level is by itself causality complete. A key feature is that stochasticity at the molecular level plays an important role in enabling agency to emerge, underlying the possibility of final causation occurring in these contexts.

Simultaneous Solar-Thermal Desalination and Catalytic Degradation of Wastewater Containing Both Salt Ions and Organic Contaminants

Although solar steam generation is promising in generating clean water by desalinating seawater, it is powerless to totally degrade organic contaminants in the seawater. Herein, solar steam generation and catalytic degradation are integrated to generate clean water by simultaneous solar-driven desalination and catalytic degradation of wastewater containing both salt ions and organic contaminants. Stepwise decoration of three-dimensional nickel foam with polypyrrole, reduced graphene oxide (RGO), and cobalt phosphate is realized to obtain polypyrrole/RGO/cobalt phosphate/nickel foam (PGCN) hybrids for solar-driven desalination and catalytic degradation of wastewater containing antibiotics and salt ions. The oxygen-containing groups of the RGO integrated with the porous nickel foam make the porous PGCN hybrid hydrophilic and ensure the upward transport of water to the evaporation surface, and the oxygen vacancies of the cobalt phosphate allow the PGCN to generate abundant highly active singlet oxygen that could still exhibit excellent catalytic degradation performances in the high salinity and highly alkaline environment of seawater. In addition to the high solar light absorbance and satisfactory solar-thermal conversion efficiency of polypyrrole and RGO, the thermally conductive nickel foam skeleton can effectively transfer the heat generated by the solar-thermal energy conversion to the adjacent cobalt phosphate catalyst and nearby wastewater, achieving a solar-thermal-promoted catalytic degradation of organic contaminants. Therefore, a high pure water evaporation rate of 2.08 kg m-2 h-1 under 1 sun irradiation and 100% catalytic degradation of Norfloxacin and dyes are achieved. The PGCN hybrid is highly efficient in purifying seawater containing 10 ppm Norfloxacin and simultaneously achieves a high purification efficiency of 100 kg m-2 h-1.

Photocatalytic Oxidative Coupling of Ethane to n-Butane Using CO2 as a Soft Oxidant over NiTi-Layered Double Hydroxide

Selective conversion of ethane (C2 H6 ) to high-value-added chemicals is a very important chemical process, yet it remains challenging owing to the difficulty of ethane activation. Here, a NiTi-layered double hydroxide (NiTi-LDH) photocatalyst is reported for oxidative coupling of ethane to n-butane (n-C4 H10 ) by using CO2 as an oxidant. Remarkably, the as-prepared NiTi-LDH exhibits a high selectivity for n-C4 H10 (92.35%) with a production rate of 62.06 µmol g-1 h-1 when the feed gas (CO2 /C2 H6 ) ratio is 2:8. The X-ray absorption fine structure (XAFS) and photoelectron characterizations demonstrate that NiTi-LDH possesses rich vacancies and high electron-hole separation efficiency, which can promote the coupling of C2 H6 to n-C4 H10 . More importantly, density functional theory (DFT) calculations reveal that ethane is first activated on the oxygen vacancies of the catalyst surface, and the C─C coupling pathway is more favorable than the C─H cleavage to C2 H4 or CH4 , resulting in the high production rate and selectivity for n-C4 H10 .

Synergistic Modulation between Non-thermal and Thermal Effects in Photothermal Catalysis based on Modified In2O3

To promote the solar-energy cascade utilization, it is necessary to increase the thermal effect of irradiation in the catalytic reactions, while simultaneously augmenting the non-thermal effect, so as to fulfill photothermal coupling. Herein, the non-thermal and thermal effect of light radiation on the surface of In2O3-based catalysts are explored and enhanced by the modification of transition metals Fe and Cu. Optical characterizations combined with water-splitting experiments show that Fe doping greatly broadens the radiation response range and enhances the absorption intensity of semiconductors' intrinsic portion, and Cu doping facilitates the absorption of visible-infrared light. The concurrent incorporation of Fe and Cu offers synergistic benefits, resulting in improved radiation response range, carrier separation and migration, as well as higher photothermal temperature upon photoexcitation. Collectively, these advantages comprehensively enhance the photothermal synergistic water-splitting reactivity. The characterizations under variable temperature conditions have demonstrated that the reaction temperature exerts a significant influence on the process of radiation absorption and conversion, ultimately impacting the non-thermal effect. The results of DFT calculations have revealed that the increasing temperature directly impacts the chemical reaction by reducing the energy barrier associated with the rate-determining step. These findings shine new light on the fundamental mechanisms underlying non-thermal and thermal effect, while also imparting significant insights for photo-thermal-coupled catalyst designing.

Promises of Plasmonic Antenna-Reactor Systems in Gas-Phase CO2 Photocatalysis

Sunlight-driven photocatalytic CO2 reduction provides intriguing opportunities for addressing the energy and environmental crises faced by humans. The rational combination of plasmonic antennas and active transition metal-based catalysts, known as "antenna-reactor" (AR) nanostructures, allows the simultaneous optimization of optical and catalytic performances of photocatalysts, and thus holds great promise for CO2 photocatalysis. Such design combines the favorable absorption, radiative, and photochemical properties of the plasmonic components with the great catalytic potentials and conductivities of the reactor components. In this review, recent developments of photocatalysts based on plasmonic AR systems for various gas-phase CO2 reduction reactions with emphasis on the electronic structure of plasmonic and catalytic metals, plasmon-driven catalytic pathways, and the role of AR complex in photocatalytic processes are summarized. Perspectives in terms of challenges and future research in this area are also highlighted.

Recent advances in the control of volatile organic compounds emissions from indoor wood-based panels: A comprehensive review

Wood-based panels provide efficient alternatives to materials such as plastics derived from traditional petroleum sources and thereby help to mitigate greenhouse gas emissions. Unfortunately, using indoor manufactured panel products also results in significant emissions of volatile organic compounds including olefins, aromatic and ester compounds, which negatively affect human health. This paper highlights recent developments and notable achievements in the field of indoor hazardous air treatment technologies to guide future research toward environmentally friendly and economically feasible directions that may have a significant impact on the improvement of human settlements. Summarizing and synthesizing the principles, advantages, and limitations of different technologies can assist policymakers and engineers in identifying the most appropriate technology for a particular air pollution control program based on criteria such as cost-effectiveness, efficiency, and environmental impact. In addition, insights into the development of indoor air pollution control technologies are provided and potential areas for innovation, improvement of existing technologies, and development of new technologies are identified. Finally, the authors also hope that this sub-paper will raise public awareness of indoor air pollution issues and promote a better understanding of the importance of indoor air pollution control technologies for public health, environmental protection, and sustainable development.

Use of Biomass Glycerol as a Reducing Agent for Photocatalytic Deprotection of Pyridine N-Oxides in an Aqueous Suspension of Titanium(IV) Oxide

Deprotection of pyridine N-oxides under mild conditions with an inexpensive and environmentally friendly reducing reagent is an important chemical procedure. The use of biomass waste as the reducing reagent, water as the solvent and solar light as the energy source is one of the most promising approaches with minimal impact on the environment. Therefore, a TiO2 photocatalyst and glycerol are suitable components of this type of reaction. Stoichiometric deprotection of pyridine N-oxide (PyNO) with a minimal amount of glycerol (PyNO:glycerol= 7 : 1) was achieved, with only CO2 being produced as the final oxidation product of glycerol. The deprotection of PyNO was thermally accelerated. Under solar light, the temperature of the reaction system increased to 40-50 °C and PyNO was also quantitatively deprotected, indicating that solar energy, i. e., UV light and thermal energy, can be effectively used. The results provide a new approach in the fields of organic chemistry and medical chemistry using biomass waste and solar light.

Machine learning of spectra-property relationship for imperfect and small chemistry data

Machine learning (ML) is causing profound changes to chemical research through its powerful statistical and mathematical methodological capabilities. However, the nature of chemistry experiments often sets very high hurdles to collect high-quality data that are deficiency free, contradicting the need of ML to learn from big data. Even worse, the black-box nature of most ML methods requires more abundant data to ensure good transferability. Herein, we combine physics-based spectral descriptors with a symbolic regression method to establish interpretable spectra-property relationship. Using the machine-learned mathematical formulas, we have predicted the adsorption energy and charge transfer of the CO-adsorbed Cu-based MOF systems from their infrared and Raman spectra. The explicit prediction models are robust, allowing them to be transferrable to small and low-quality dataset containing partial errors. Surprisingly, they can be used to identify and clean error data, which are common data scenarios in real experiments. Such robust learning protocol will significantly enhance the applicability of machine-learned spectroscopy for chemical science.

Photothermal Nanomaterials: A Powerful Light-to-Heat Converter

All forms of energy follow the law of conservation of energy, by which they can be neither created nor destroyed. Light-to-heat conversion as a traditional yet constantly evolving means of converting light into thermal energy has been of enduring appeal to researchers and the public. With the continuous development of advanced nanotechnologies, a variety of photothermal nanomaterials have been endowed with excellent light harvesting and photothermal conversion capabilities for exploring fascinating and prospective applications. Herein we review the latest progresses on photothermal nanomaterials, with a focus on their underlying mechanisms as powerful light-to-heat converters. We present an extensive catalogue of nanostructured photothermal materials, including metallic/semiconductor structures, carbon materials, organic polymers, and two-dimensional materials. The proper material selection and rational structural design for improving the photothermal performance are then discussed. We also provide a representative overview of the latest techniques for probing photothermally generated heat at the nanoscale. We finally review the recent significant developments of photothermal applications and give a brief outlook on the current challenges and future directions of photothermal nanomaterials.

Ir-CoO Active Centers Supported on Porous Al2 O3 Nanosheets as Efficient and Durable Photo-Thermal Catalysts for CO2 Conversion

Photo-thermal catalytic CO₂ hydrogenation is currently extensively studied as one of the most promising approaches for the conversion of CO₂ into value-added chemicals under mild conditions; however, achieving desirable conversion efficiency and target product selectivity remains challenging. Herein, the fabrication of Ir-CoO/Al₂ O₃ catalysts derived from Ir/CoAl LDH composites is reported for photo-thermal CO₂ methanation, which consist of Ir-CoO ensembles as active centers that are evenly anchored on amorphous Al₂ O₃ nanosheets. A CH₄ production rate of 128.9 mmol g_cat⁻ ¹ h⁻¹  is achieved at 250 °C under ambient pressure and visible light irradiation, outperforming most reported metal-based catalysts. Mechanism studies based on density functional theory (DFT) calculations and numerical simulations reveal that the CoO nanoparticles function as photocatalysts to donate electrons for Ir nanoparticles and meanwhile act as "nanoheaters" to effectively elevate the local temperature around Ir active sites, thus promoting the adsorption, activation, and conversion of reactant molecules. In situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS) demonstrates that illumination also efficiently boosts the conversion of formate intermediates. The mechanism of dual functions of photothermal semiconductors as photocatalysts for electron donation and as nano-heaters for local temperature enhancement provides new insight in the exploration for efficient photo-thermal catalysts.

Strong Metal Support Effect of Pt/g-C3N4 Photocatalysts for Boosting Photothermal Synergistic Degradation of Benzene

Catalysis is the most efficient and economical method for treating volatile organic pollutants (VOCs). Among the many materials that are used in engineering, platinized carbon nitride (Pt/g-C₃N₄) is an efficient and multifunctional catalyst which has strong light absorption and mass transfer capabilities, which enable it to be used in photocatalysis, thermal catalysis and photothermal synergistic catalysis for the degradation of benzene. In this work, Pt/g-C₃N₄ was prepared by four precursors for the photothermal synergistic catalytic degradation of benzene, which show different activities, and many tests were carried out to explore the possible reasons for the discrepancy. Among them, the Pt/g-C₃N₄ prepared from dicyanamide showed the highest activity and could convert benzene (300 ppm, 20 mL·min^-1) completely at 162 °C under solar light and 173 °C under visible light. The reaction temperature was reduced by nearly half compared to the traditional thermal catalytic degradation of benzene at about 300 °C.

UiO-66 MOF-Derived Ru@ZrO2 Catalysts for Photo-Thermal CO2 Hydrogenation

The use of metal–organic frameworks (MOFs) as templates or precursors in the manufacture of heterogeneous catalysts is highly attractive due to the transfer of MOFs’ inherent porosity and homogeneous metallic distribution to the derived structure. Herein, we report on the preparation of MOF-derived Ru@ZrO2 catalysts by controlled thermal treatment of zirconium-based MOF UiO-66 with ruthenium moieties. Ru3+ (3 or 10 mol%) precursor was added to UiO-66 synthesis and, subsequently, the as-synthesized hybrid structure was calcined in flowing air at different temperatures (400–600 °C) to obtain ZrO2-derived oxides doped with highly dispersed Ru metallic clusters. The materials were tested for the catalytic photo-thermal conversion of CO2 to CH4. Methanation experiments were conducted in a continuous flow (feed flow rate of 5 sccm and 1:4 CO2 to H2 molar ratio) reactor at temperatures from 80 to 300 °C. Ru0.10@ZrO2 catalyst calcined at 600 °C was able to hydrogenate CO2 to CH4 with production rates up to 65 mmolCH4·gcat.–1·h–1, CH4 yield of 80% and nearly 100% selectivity at 300 °C. The effect of the illumination was investigated with this catalyst using a high-power visible LED. A CO2 conversion enhancement from 18% to 38% was measured when 24 sun of visible LED radiation was applied, mainly due to the increase in the temperature as a result of the efficient absorption of the radiation received. MOF-derived Ru@ZrO2 catalysts have resulted to be noticeably active materials for the photo-thermal hydrogenation of CO2 for the purpose of the production of carbon-neutral methane. A remarkable effect of the ZrO2 crystalline phase on the CH4 selectivity has been found, with monoclinic zirconia being much more selective to CH4 than its cubic allotrope.

Nanomaterials Aspects for Photocatalysis as Potential for the Inactivation of COVID-19 Virus

Coronavirus disease-2019 is caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and is the most difficult recent global outbreak. Semiconducting materials can be used as effective photocatalysts in photoactive technology by generating various reactive oxidative species (ROS), including superoxide (•O2−) and hydroxyl (•OH) radicals, either by degradation of proteins, DNA, and RNA or by inhibition of cell development through terminating the cellular membrane. This review emphasizes the capability of photocatalysis as a reliable, economical, and fast-preferred method with high chemical and thermal stability for the deactivation and degradation of SARS-CoV-2. The light-generated holes present in the valence band (VB) have strong oxidizing properties, which result in the oxidation of surface proteins and their inactivation under light illumination. In addition, this review discusses the most recent photocatalytic systems, including metals, metal oxides, carbonaceous nanomaterials, and 2-dimensional advanced structures, for efficient SARS-CoV-2 inactivation using different photocatalytic experimental parameters. Finally, this review article summarizes the limitations of these photocatalytic approaches and provides recommendations for preserving the antiviral properties of photocatalysts, large-scale treatment, green sustainable treatment, and reducing the overall expenditure for applications.

Green Thermo-Photo Catalytic Production of Syngas Using Pd/Nb-TiO2 Catalysts

In this contribution, a series of Pd-promoted Nb-doped titania samples were essayed in the gas-phase thermo-photo production of syngas from methanol/water mixtures. The Pd loading was tested in the 0.1 to 2.5 wt % range, leading to the presence of metallic nanoparticles under reaction. Reaction rates exceeding 52 mmol H₂ g^-1 h^-1 and quantum efficiencies above 33% were obtained. The optimum sample having a 0.5 wt % of Pd provided an outstanding synergy between light and heat under reaction conditions, facilitating the boost of activity with respect to the single-source processes and achieving high selectivity to syngas. The spectroscopic analysis of the physico-chemical ground of the activity unveiled that the noble metal interaction with the Nb-doped anatase support triggers a cooperative effect, promoting the evolution of formic acid-type methanol-derived carbon-containing species and rendering a significant enhancement of syngas production. The proposed thermo-photo system is thus a firm candidate to contribute to the new green circular economy.

Turning dead leaves into an active multifunctional material as evaporator, photocatalyst, and bioplastic

Large numbers of leaves fall on the earth each autumn. The current treatments of dead leaves mainly involve completely destroying the biocomponents, which causes considerable energy consumption and environmental issues. It remains a challenge to convert waste leaves into useful materials without breaking down their biocomponents. Here, we turn red maple dead leaves into an active three-component multifunctional material by exploiting the role of whewellite biomineral for binding lignin and cellulose. Owing to its intense optical absorption spanning the full solar spectrum and the heterogeneous architecture for effective charge separation, films of this material show high performance in solar water evaporation, photocatalytic hydrogen production, and photocatalytic degradation of antibiotics. Furthermore, it also acts as a bioplastic with high mechanical strength, high-temperature tolerance, and biodegradable features. These findings pave the way for the efficient utilization of waste biomass and innovations of advanced materials.

In Situ Growth of Cs3Bi2Br9 Quantum Dots on Bi-MOF Nanosheets via Cosharing Bismuth Atoms for CO2 Capture and Photocatalytic Reduction

Given the global warming caused by excess CO₂ accumulation in the atmosphere, it is essential to reduce CO₂ by capturing and converting it to chemical feedstock using solar energy. Herein, a novel Cs₃Bi₂Br₉/bismuth-based metal-organic framework (Bi-MOF) composite was prepared via an in situ growth strategy of Cs₃Bi₂Br₉ quantum dots (QDs) on the surface of Bi-MOF nanosheets through coshared bismuth atoms. The prepared Cs₃Bi₂Br₉/Bi-MOF exhibits bifunctional merits for both the high capture and effective conversion of CO₂, among which the optimized 3Cs₃Bi₂Br₉/Bi-MOF sample shows a CO₂-CO conversion yield as high as 572.24 μmol g^-1 h^-1 under the irradiation of a 300 W Xe lamp. In addition, the composite shows good stability after five recycles in humid air, and the CO₂ photoreduction efficiency does not decrease significantly. The mechanistic investigation uncovers that the intimate atomic-level contact between Cs₃Bi₂Br₉ and Bi-MOF via the coshared atoms not only improves the dispersion of Cs₃Bi₂Br₉ QDs over Bi-MOF nanosheets but also accelerates interfacial charge transfer by forming a strong bonding linkage, which endows it with the best performance of CO₂ photoreduction. Our new finding of bismuth-based metal-organic framework/lead-free halide perovskite by cosharing atoms opens a new avenue for a novel preparation strategy of the heterojunction with atomic-level contact and potential applications in capture and photocatalytic conversion of CO₂.

Acoustic Plasmons in Nickel and Its Modification upon Hydrogen Uptake

In this work, we study, in the framework of the ab initio linear-response time-dependent density functional theory, the low-energy collective electronic excitations with characteristic sound-like dispersion, called acoustic plasmons, in bulk ferromagnetic nickel. Since the respective spatial oscillations in slow and fast charge systems involve states with different spins, excitation of such plasmons in nickel should result in the spatial variations in the spin structure as well. We extend our study to NiHx with different hydrogen concentrations x. We vary the hydrogen concentration and trace variations in the acoustic plasmons properties. Finally, at x=1 the acoustic modes disappear in paramagnetic NiH. The explanation of such evolution is based on the changes in the population of different energy bands with hydrogen content variation.

Solar utilization beyond photosynthesis

Natural photosynthesis is an efficient biochemical process which converts solar energy into energy-rich carbohydrates. By understanding the key photoelectrochemical processes and mechanisms that underpin natural photosynthesis, advanced solar utilization technologies have been developed that may be used to provide sustainable energy to help address climate change. The processes of light harvesting, catalysis and energy storage in natural photosynthesis have inspired photovoltaics, photoelectrocatalysis and photo-rechargeable battery technologies. In this Review, we describe how advanced solar utilization technologies have drawn inspiration from natural photosynthesis, to find sustainable solutions to the challenges faced by modern society. We summarize the uses of advanced solar utilization technologies, such as converting solar energy to electrical and chemical energy, electrochemical storage and conversion, and associated thermal tandem technologies. Both the foundational mechanisms and typical materials and devices are reported. Finally, potential future solar utilization technologies are presented that may mimic, and even outperform, natural photosynthesis.

Influence of Butanol Isomerization on Photothermal Hydrogen Production over Ti@TiO2 Core-Shell Nanoparticles

In this work, we reported for the first time the effect of butanol isomerization on the photothermal production of hydrogen in the presence of a noble, metal-free Ti@TiO2 core-shell photocatalyst. The experiments were performed in aqueous solutions of 1-BuOH, 2-BuOH, and t-BuOH under Xe lamp irradiation (vis/NIR: 8.4 W, UV: 0.6 W) at 35–69 °C. The increase in temperature significantly enhanced H2 formation, indicating a strong photothermal effect in the studied systems. However, in dark conditions, H2 emission was not observed even at elevated temperatures, which clearly points out the photonic origin of H2 photothermal formation. The rate of H2 production followed the order of 1-BuOH >> 2-BuOH > t-BuOH in the entire range of studied temperatures. In the systems with 1-BuOH and 2-BuOH, hydrogen was the only gaseous product measured online in the outlet carrier argon using mass spectrometry. By contrast, a mixture of H2, CH4, and C2H6 was detected for t-BuOH, indicating a C–C bond scission with this isomer during photocatalytic degradation. The apparent activation energies, Ea, with 1-BuOH/2-BuOH isomers (20–21 kJ·mol−1) was found to be larger than for t-BuOH (13 kJ·mol−1). The significant difference in thermal response for 1-BuOH/2-BuOH and t-BuOH isomers was ascribed to the difference in the photocatalytic mechanisms of these species. The photothermal effect with 1-BuOH/2-BuOH isomers can be explained by the thermally induced transfer of photogenerated, shallowly trapped electron holes to highly reactive free holes at the surface of TiO2 and the further hole-mediated cleavage of the O-H bond. In the system with t-BuOH, another mechanism could also contribute to the overall process through hydrogen abstraction from the C–H bond by an intermediate •OH radical, leading to CH3• group ejection. Formation of •OH radicals during light irradiation of Ti@TiO2 nanoparticle suspension in water has been confirmed using terephthalate dosimetry. This analysis also revealed a positive temperature response of •OH radical formation.

Solar Panel Technologies for Light-to-Chemical Conversion

The sustainable synthesis of fuels and chemicals is key to attaining a carbon-neutral economy. This can be achieved by mimicking the light-harvesting and catalytic processes occurring in plants. Solar fuel production is commonly performed via established approaches, including photovoltaic-electrochemical (PV-EC), photoelectrochemical (PEC), and photocatalytic (PC) systems. A recent shift saw these systems evolve into integrated, compact panels, which suit practical applications through their simplicity, scalability, and ease of operation. This advance has resulted in a suite of apparently similar technologies, including the so-called artificial leaves and PC sheets. In this Account, we compare these different thin film technologies based on their micro- and nanostructure (i.e., layered vs particulate), operation principle (products occurring on the same or different sides of the panel), and product/reaction scope (overall water splitting and CO₂ reduction, or organics, biomass, and waste conversion).For this purpose, we give an overview of developments established over the past few years in our laboratory. Two light absorbers are generally required to overcome the thermodynamic challenges of coupling water oxidation to proton or CO₂ reduction with good efficiency. Hence, tandem artificial leaves combine a lead halide perovskite photocathode with a BiVO₄ photoanode to generate syngas (a mixture of H₂ and CO), whereas PC sheets involve metal-ion-doped SrTiO₃ and BiVO₄ particles for selective formate synthesis from CO₂ and water. On the other hand, only a single light absorber is needed for coupling H₂ evolution to organics oxidation in the thermodynamically less demanding photoreforming process. This can be performed by immobilized carbon nitride (CN_x) in the case of PC sheets or by a single perovskite light absorber in the case of PEC reforming leaves. Such systems can be integrated with a range of inorganic, molecular, and biological catalysts, including metal alloys, molecular cobalt complexes, enzymes, and bacteria, with low overpotentials and high catalytic activities toward selective product formation.This wide reaction scope introduces new challenges toward quantifying and comparing the performance of different systems. To this end, we propose new metrics to evaluate the performance of solar fuel panels based on the areal product rates and commercial product value. We further explore the key opportunities and challenges facing the commercialization of thin film technologies for solar fuels research, including performance losses over larger areas and catalyst/device recyclability. Finally, we identify emerging applications beyond fuels, where such light-driven panels can make a difference, including the waste management, chemical synthesis, and pharmaceutical industries. In the long term, these aspects may facilitate a transition toward a light-driven circular economy.

Critical role of tetracycline's self-promotion effects in its visible-light driven photocatalytic degradation over ZnO nanorods

Zinc oxide (ZnO), which is widely applied for ultraviolet-light driven photocatalysis, has no activity in visible-light photocatalytic process due to its large band gap of ∼3.2 eV. Herein, however, we demonstrated the multiple self-promotion effects of tetracycline as band adjuster, photo-sensitizer, and charge transfer promoter for ZnO nanorods, realizing its visible-light photocatalytic degradation with an excellent removal efficiency up to 91.1% within only 2 h. Besides, the influence of complex realistic factors on this unique process was evaluated together with tests with realistic water matrices. Furthermore, the active species and degradation products were identified. Both acute and developmental toxicities were found to be reduced as the degradation proceeds. These results pave the path for the brand-new self-driven visible-light photocatalysis.

Metal-organic framework (MOF)-5/CuO@ZnIn2S4 core-shell Z-scheme tandem heterojunctions for improved charge separation and enhanced photocatalytic performance

Interface engineering is regarded as an effective strategy for charge separation. Metal-organic framework (MOF)-5/CuO@ZnIn₂S₄ core-shell Z-scheme tandem heterojunctions with a three-dimensional floral spherical shape are prepared by a two-step solvothermal and oxidative method. The flower spherical core-shell structure enhances multiple reflections and refractions of light and thus improves light utilization efficiently. In addition, this core-shell structure can supply sufficient active sites for photocatalytic reactions. Meanwhile, the composition of Z-scheme tandem heterojunctions and the photothermal effect contributed to the spatial charge separation and accelerated the photocatalytic process. The photocatalytic hydrogen production rate of MOF-5/CuO@ZnIn₂S₄ (1938.3 μmol g^-1 h^-1) is 18 times higher than that of pristine MOF-5, and the photocatalytic degradation efficiency of 2,4-dichlorophenol and phenol can reach up to 98.7% and 97.3%, respectively. In addition, multiple cycle experiments demonstrate high stability, which is favorable for practical applications.