Charge carrier dynamics and reaction intermediates in heterogeneous photocatalysis by time-resolved spectroscopies

Achieving a solar-to-chemical efficiency of 3.6% in ambient conditions by inhibiting interlayer charges transport

Efficiently converting solar energy into chemical energy remains a formidable challenge in artificial photosynthetic systems. To date, rarely has an artificial photosynthetic system operating in the open air surpassed the highest solar-to-biomass conversion efficiency (1%) observed in plants. In this study, we present a three-dimension polymeric photocatalyst achieving a solar-to-H2O2 conversion efficiency of 3.6% under ambient conditions, including real water, open air, and room temperature. The impressive performance is attributed to the efficient storage of electrons inside materials via expeditious intramolecular charge transfer, and the fast extraction of the stored electrons by O2 that can diffuse into the internal pores of the self-supporting three-dimensional material. This construction strategy suppresses the interlayer transfer of excitons, polarizers and carriers, effectively increases the utilization of internal excitons to 82%. This breakthrough provides a perspective to substantially enhance photocatalytic performance and bear substantial implications for sustainable energy generation and environmental remediation.

Steering Photooxidation of Methane to Formic Acid over A Priori Screened Supported Catalysts

Efficient methane photooxidation to formic acid (HCOOH) has emerged as a sustainable approach to simultaneously generate value-added chemicals and harness renewable energy. However, the persistent challenge lies in achieving a high yield and selectivity for HCOOH formation, primarily due to the complexities associated with modulating intermediate conversion and desorption after methane activation. In this study, we employ first-principles calculations as a comprehensive guiding tool and discover that by precisely controlling the O2 activation process on noble metal cocatalysts and the adsorption strength of carbon-containing intermediates on metal oxide supports, one can finely tune the selectivity of methane photooxidation products. Specifically, a bifunctional catalyst comprising Pd nanoparticles and monoclinic WO3 (Pd/WO3) would possess optimal O2 activation kinetics and an intermediate oxidation/desorption barrier, thereby promoting HCOOH formation. As evidenced by experiments, the Pd/WO3 catalyst achieves an exceptional HCOOH yield of 4.67 mmol gcat-1 h-1 with a high selectivity of 62% under full-spectrum light irradiation at room temperature using molecular O2. Notably, these results significantly outperform the state-of-the-art photocatalytic systems operated under identical condition.

Alternating 3rd- to 2nd-Order Charge Reaction Kinetics on Bismuth Vanadate Photoanodes with Ultrathin Bismuth Metal-Organic-Frameworks

The most challenging obstacle for photocatalysts to efficiently harvest solar energy is the sluggish surface redox reaction (e. g., oxygen evolution reaction, OER) kinetics, which is believed to originate from interface catalysis rather than the semiconductor photophysics. In this work, we developed a light-modulated transient photocurrent (LMTPC) method for investigating surface charge accumulation and reaction on the W-doped bismuth vanadate (W : BiVO4) photoanodes during photoelectrochemical water oxidation. Under illuminating conditions, the steady photocurrent corresponds to the charge transfer rate/kinetics, while the integration of photocurrent (I~t) spikes during the dark period is regarded as the charge density under illumination. Quantitative analysis of the surface hole densities and photocurrents at 0.6 V vs. reversible hydrogen electrode results in an interesting rate-law kinetics switch: a 3rd-order charge reaction behavior appeared on W : BiVO4, but a 2nd-order charge reaction occurred on W : BiVO4 surface modified with ultrathin Bi metal-organic-framework (Bi-MOF). Consequently, the photocurrent for water oxidation on W : BiVO4/Bi-MOF displayed a 50 % increment. The reaction kinetics alternation with new interface reconstruction is proposed for new mechanism understanding and/or high-performance photocatalytic applications.

Imogolite Nanotubes and Their Permanently Polarized Bifunctional Surfaces for Photocatalytic Hydrogen Production

To date, imogolite nanotubes (INTs) have been primarily used for environmental applications such as dye and pollutant degradation. However, imogolite's well-defined porous structure and distinctive electro-optical properties have prompted interest in the system's potential for energy-relevant chemical reactions. The imogolite structure leads to a permanent intrawall polarization arising from the presence of bifunctional surfaces at the inner and outer tube walls. Density functional theory simulations suggest such bifunctionality to encompass also spatially separated band edges. Altogether, these elements make INTs appealing candidates for facilitating chemical conversion reactions. Despite their potential, the exploitation of imogolite's features for photocatalysis is at its infancy, thence relatively unexplored. This perspective overviews the basic physical-chemical and optoelectronical properties of imogolite nanotubes, emphasizing their role as wide bandgap insulator. Imogolite nanotubes have multifaceted properties that could lead to beneficial outcomes in energy-related applications. This work illustrates two case studies demonstrating a step-forward on photocatalytic hydrogen production achieved through atomic doping or metal co-catalyst. INTs exhibit potential in energy conversion and storage, due to their ability to accommodate functions such as enhancing charge separation and influencing the chemical potentials of interacting species. Yet, tapping into potential for energy-relevant application needs further experimental research, computational, and theoretical analysis.

Synchrotron Radiation Based X-ray Absorption Spectroscopy: Fundamentals and Applications in Photocatalysis

Photocatalysis is one of the most promising green technologies to utilize solar energy for clean energy achievement and environmental governance. There is a knotty problem to rational designing high-performance photocatalyst, which largely depends on an in-depth insight into their structure-activity relationships and complex photocatalytic reaction mechanisms. Synchrotron radiation based X-ray absorption spectroscopy (XAS) is an important characterization method for photocatlayst to offer the element-specific key geometric and electronic structural information at the atomic level, on this basis, time-resolved XAS technique has a huge impact on mechanistic understanding of photochemical reaction owing to their powerful ability to probe, in real-time, the electronic and geometric structures evolution within photocatalysis reactions. This review will focus on the fundamentals of XAS and their applications in photocatalysis. The detailed applications obtained from XAS is described through the following aspects: 1) identifying local structure of photocatalyst; 2) uncovering in situ structure and chemical state evolution during photocatalysis; 3) revealing the photoexcited process. We will provide an in depth understanding on how the XAS method can guide the rational design of highly efficient photocatalyst. Finally, a systematic summary of XAS and related significance is made and the research perspectives are suggested.

Transient Absorption Spectroscopy of Films: Impact of Refractive Index

Transient absorption spectroscopy is a powerful technique to study the photoinduced phenomena in a wide range of states from solutions to solid film samples. It was designed and developed based on photoinduced absorption changes or that photoexcitation triggers a chain of reactions with intermediate states or reaction steps with presumably different absorption spectra. However, according to general electromagnetic theory, any change in the absorption properties of a medium is accompanied by a change in the refractive properties. Although this photoinduced change in refractive index has a negligible effect on solution measurements, it may significantly affect the measured response of thin films. In this Perspective paper, we examine why and how the measured responses of films differ from their expected "pure" absorption responses. The effect of photoinduced refractive index change can be concluded and studied by comparing the transmitted and reflected probe light responses. Another discussed aspect is the effect of light interference on thin films. Finally, new opportunities of monitoring the photocarrier migration in films and studying nontransparent samples using the reflected probe light response are discussed. Most of the examples provided in this article focus on studies involving perovskite, TiO2, and graphene-based films, but the general discussion and conclusions can be applicable to a wide range of semiconductor and thin metallic films.

Charge Trapping in Semiconductor Photocatalysts: A Time- and Space-Domain Perspective

Harnessing solar energy to produce value-added fuels and chemicals through photocatalysis techniques holds promise for establishing a sustainable and environmentally friendly energy economy. The intricate dynamics of photogenerated charge carriers lies at the core of the photocatalysis. The balance between charge trapping and band-edge recombination has a crucial influence on the activity of semiconductor photocatalysts. Consequently, the regulation of traps in photocatalysts becomes the key to optimizing their activities. Nevertheless, our comprehension of charge trapping, compared to that of well-studied charge recombination, remains somewhat limited. This limitation stems from the inherently heterogeneous nature of traps at both temporal and spatial scales, which renders the characterization of charge trapping a formidable challenge. Fortunately, recent advancements in both time-resolved spectroscopy and space-resolved microscopy have paved the way for considerable progress in the investigation and manipulation of charge trapping. In this Perspective, we focus on charge trapping in photocatalysts with the aim of establishing a direct link to their photocatalytic activities. To achieve this, we begin by elucidating the principles of advanced time-resolved spectroscopic techniques such as femtosecond time-resolved transient absorption spectroscopy and space-resolved microscopic methods, such as single-molecule fluorescence microscopy and surface photovoltage microscopy. Additionally, we provide an overview of noteworthy research endeavors dedicated to probing charge trapping using time- and space-resolved techniques. Our attention is then directed toward recent achievements in the manipulation of charge trapping in photocatalysts through defect engineering. Finally, we summarize this Perspective and discuss the future challenges and opportunities that lie ahead in the field.

Time-Resolved Spectroscopy for Dynamic Investigation of Photoresponsive Metal-Organic Frameworks

Photoresponsive MOFs with precise and adjustable reticular structures are attractive for light conversion applications. Uncovering the photoinduced carrier dynamics lays the essential foundation for the further development and optimization of the MOF material. With the application of time-resolved spectroscopy, photophysical processes including excimer formation, energy transfer/migration, and charge transfer/separation have been widely investigated. However, the identification of distinct photophysical processes in real experimental MOF spectra still remains difficult due to the spectral and dynamic complexity of MOFs. In this Perspective, we summarize the typical spectral features of these photophysical processes and the related analysis methods for dynamic studies performed by time-resolved photoluminescence (TR-PL) and transient absorption (TA) spectroscopy. Based on the recent understanding of excited-state properties of photoresponsive MOFs and the discussion of challenges and future outlooks, this Perspective aims to provide convenience for MOF kinetic analysis and contribute to the further development of photoresponsive MOF material.

Time Constant Estimation and Alleviation of Interior Charge Recombination for Photocatalytic Reaction Guided by Correlation with Photoelectrochemical Behaviors

Interior charge recombination that inherently competes with the separation of photogenerated charges is crucial to the photocatalytic utilization of incident photons. We here propose to simultaneously promote both the desired hole extraction and semiconductor-cocatalyst interfacial electron transfer and suppress the undesired interior charge recombination by shifting the equilibrium potential of the semiconductor in an actual photocatalytic reaction. By correlating with these interfacial electronic processes, we estimate the time constants for the occurrence of interior charge recombination, which range from several milliseconds to several deciseconds in the actual photocatalytic reaction. This time scale estimated from photoelectrochemical behaviors not only provides a substantial guide to photocatalytic reaction design but also avoids relying on a very dense photon beam that greatly deviates from actual working conditions to generate discernible optical signals in certain common methods.

Metal-Free Photocatalytic CO2 Reduction to CH4 and H2 O2 under Non-sacrificial Ambient Conditions

Photocatalytic CO2 reduction to CH4 requires photosensitizers and sacrificial agents to provide sufficient electrons and protons through metal-based photocatalysts, and the separation of CH4 from by-product O2 has poor applications. Herein, we successfully synthesize a metal-free photocatalyst of a novel electron-acceptor 4,5,9,10-pyrenetetrone (PT), to our best knowledge, this is the first time that metal-free catalyst achieves non-sacrificial photocatalytic CO2 to CH4 and easily separable H2 O2 . This photocatalyst offers CH4 product of 10.6 μmol ⋅ g-1  ⋅ h-1 under non-sacrificial ambient conditions (room temperature, and only water), which is two orders of magnitude higher than that of the reported metal-free photocatalysts. Comprehensive in situ characterizations and calculations reveal a multi-step reaction mechanism, in which the long-lived oxygen-centered radical in the excited PT provides as a site for CO2 activation, resulting in a stabilized cyclic carbonate intermediate with a lower formation energy. This key intermediate is thermodynamically crucial for the subsequent reduction to CH4 product with the electronic selectivity of up to 90 %. The work provides fresh insights on the economic viability of photocatalytic CO2 reduction to easily separable CH4 in non-sacrificial and metal-free conditions.

Single-Atoms on Crystalline Carbon Nitrides for Selective C─H Photooxidation: A Bridge to Achieve Homogeneous Pathways in Heterogeneous Materials

Single-atom catalysis is a field of paramount importance in contemporary science due to its exceptional ability to combine the domains of homogeneous and heterogeneous catalysis. Iron and manganese metalloenzymes are known to be effective in C─H oxidation reactions in nature, inspiring scientists to mimic their active sites in artificial catalytic systems. Herein, a simple and versatile cation exchange method is successfully employed to stabilize low-cost iron and manganese single-atoms in poly(heptazine imides) (PHI). The resulting materials are employed as photocatalysts for toluene oxidation, demonstrating remarkable selectivity toward benzaldehyde. The protocol is then extended to the selective oxidation of different substrates, including (substituted) alkylaromatics, benzyl alcohols, and sulfides. Detailed mechanistic investigations revealed that iron- and manganese-containing photocatalysts work through a similar mechanism via the formation of high-valent M═O species. Operando X-ray absorption spectroscopy (XAS) is employed to confirm the formation of high-valent iron- and manganese-oxo species, typically found in metalloenzymes involved in highly selective C─H oxidations.

Rh/Cr2 O3 and CoOx Cocatalysts for Efficient Photocatalytic Water Splitting by Poly (Triazine Imide) Crystals

In situ photo-deposition of both Pt and CoOx cocatalysts on the facets of poly (triazine imide) (PTI) crystals has been developed for photocatalytic overall water splitting. However, the undesired backward reaction (i.e., water formation) on the noble Pt surface is a spontaneously down-hill process, which restricts their efficiency to run the overall water splitting reaction. Herein, we demonstrate that the efficiency for photocatalytic overall water splitting could be largely promoted by the decoration of Rh/Cr2 O3 and CoOx as H2 and O2 evolution cocatalysts, respectively. Results reveal that the dual cocatalysts greatly extract charges from bulk to surface, while the Rh/Cr2 O3 cocatalyst dramatically restrains the backward reaction, achieving an apparent quantum efficiency (AQE) of 20.2 % for the photocatalytic overall water splitting reaction.

Evaluating a Second Time Scale for Hole Extraction in an Actual Photocatalytic Reaction: The Method

Photoinduced hole extraction, which is widely believed to occur on the picosecond-nanosecond time scale, exhibits sensitive correlation with semiconductor-cocatalyst interfacial electron transfer that occurs on a second time scale in a photocatalytic reaction. This inherent correlation means that the required high density of electrons for overcoming the potential barrier severely suppresses the survival and interfacial extraction of photogenerated holes. We here propose to evaluate the time constant for the occurring hole extraction by separately monitoring the rise and decay of the photoinduced potential. The evaluated second time scale indicates that hole extraction crucially influences the actual photocatalytic reaction. To improve photocatalytic photon utilization, we facilitate hole extraction by lowering the semiconductor-cocatalyst contact barrier.

Influence laws of air gap structure manipulation of covalent organic frameworks on dielectric properties and exciton effects for photopolymerization

Boosting the dissociation of excitons is essential to enhance the photocatalytic efficiency. However, the relationship between the structure of the catalyst and the exciton effect on the photocatalytic activity is still unclear as the main problem. Here, it is proposed that as a descriptive factor, an experimentally measurable dielectric constant (εr) is available to quantitatively describe its relationship with exciton binding energy (Eb) and photocatalytic activity. With tuning the linker of covalent organic frameworks (COFs), the "air gap" structure is oriented to shrink, leading to an increased εr of COFs and a lower Eb to facilitate exciton dissociation. Meanwhile, taking "water-/oxygen-fueled" photo-induced electron transfer reversible addition-fragmentation chain transfer (PET-RAFT) polymerization as a demonstration platform, it can be seen that COFs with a small "air gap" structure have relatively superior photocatalytic activity. This provides important implications for the evolution of efficient photocatalysts.

Emerging conjugated polymers for heterogeneous photocatalytic chemical transformation

In recent decades, the efficient utilization of solar energy through heterogeneous photocatalytic chemical transformation has attracted much attention. As emerging metal-free, pure organic and heterogeneous photocatalysts, π-conjugated polymers (CPs) have been used in visible-light-driven chemical transformations due to their stability, high specific surface area, metal-free nature, and high structural designability. In this review, we summarize the synthesis protocols and design strategies for efficient CP-based photocatalysts based on the photocatalytic mechanisms. Then we highlight the key progress in light-driven chemical transformation using CPs developed by our group. Finally, we present the outlook and possible challenges for future progress of the field.

Tungsten Oxide-Based Z-Scheme for Visible Light-Driven Hydrogen Production from Water Splitting

The stoichiometric water splitting using a solar-driven Z-scheme approach is an emerging field of interest to address the increasing renewable energy demand and environmental concerns. So far, the reported Z-scheme must comprise two populations of photocatalysts. In the present work, only tungsten oxides are used to construct a robust Z-scheme system for complete visible-driven water splitting in both neutral and alkaline solutions, where sodium tungsten oxide bronze (Na_0.56WO_3-x) is used as a H₂ evolution photocatalyst and two-dimensional (2D) tungsten trioxide (WO₃) nanosheets as an O₂ evolution photocatalyst. This system efficiently produces H₂ (14 μmol h^-1) and O₂ (6.9 μmol h^-1) at an ideal molar ratio of 2:1 in an aqueous solution driven by light, resulting in a remarkably high apparent quantum yield of 6.06% at 420 nm under neutral conditions. This exceptional selective H₂ and O₂ production is due to the preferential adsorption of iodide (I^-) on Na_0.56WO_3-x and iodate (IO₃^-) on WO₃, which is evidenced by both experiments and density functional theory calculation. The present liquid Z-scheme in the presence of efficient shuttle molecules promises a separated H₂ and O₂ evolution by applying a dual-bed particle suspension system, thus a safe photochemical process.

A review of research trends on the usage of photocatalysis for wastewater treatment: bibliometric analysis

Photocatalysis is seen as a viable alternative to treating water pollution, due to its flexibility, low cost, and ability to use visible light which is a plentiful and free energy source. Hence, determining the topics of interest and widening collaboration networks will go a long way in improving research in this field. In this study, we aimed to analyze the global research trends on the usage of photocatalysis for wastewater treatment using bibliometric analysis, centered on the outputs of publications, co-authorships, countries of affiliation, and author's keyword co-occurrences. Bibliometric analysis is a review method that is well-known and more conversant to Social Science. Employing it in Physical Science, which is rarely seen, will provide an avenue and yet another method of determining common research topics as well as the potential opportunities and future research in the field. A potential hybrid review paper of great importance to future research in the area will be produced. A total of 1373 articles published within 27 years between 1993 and 2020 were extracted from the Scopus database. In the beginning, less attention was given to the said topic, because after the oldest article was published in 1993, there was no record of other publications until after 5 years (1998). However, from 2002 there was a growing interest in research in that field, with a cumulative increase every year to date, except for a few years with fewer publications. Meanwhile, the number of publications has risen significantly from 2017 to 2020, with an increase of more than 70 publications every year; this is expected to increase rapidly in the coming years. Recently researchers are focusing on developing efficient photocatalysts for contaminants of emerging concern, like pharmaceutical and refinery wastewater, however, the usage of conducting polymers to produce nanocomposite which was found to be very effective is still lagged in wastewater treatment, as such it will be a good area of future research on effective photocatalysts for wastewater treatment.

Supplementary Information

The online version contains supplementary material available at 10.1007/s40899-023-00868-5.

Charge Dynamics of a CuO Thin Film on Picosecond to Microsecond Timescales Revealed by Transient Absorption Spectroscopy

Understanding the mechanism of charge dynamics in photocatalysts is the key to design and optimize more efficient materials for renewable energy applications. In this study, the charge dynamics of a CuO thin film are unraveled via transient absorption spectroscopy (TAS) on the picosecond to microsecond timescale for three different excitation energies, i.e., above, near, and below the band gap, to explore the role of incoherent broadband light sources. The shape of the ps-TAS spectra changes with the delay time, while that of the ns-TAS spectra is invariant for all the excitation energies. Regardless of the excitations, three time constants, τ₁ ∼ 0.34-0.59 ps, τ₂ ∼ 162-175 ns, and τ₃ ∼ 2.5-3.3 μs, are resolved, indicating the dominating charge dynamics at very different timescales. Based on these observations, the UV-vis absorption spectrum, and previous findings in the literature, a compelling transition energy diagram is proposed. Two conduction bands and two defect (deep and shallow) states dominate the initial photo-induced electron transitions, and a sub-valence band energy state is involved in the subsequent transient absorption. By solving the rate equations for the pump-induced population dynamics and implementing the assumed Lorentzian absorption spectral shape between two energy states, the TAS spectra are modeled which capture the main spectral and time-dependent features for t > 1 ps. By further considering the contributions from free-electron absorption during very early delay times, the modeled spectra reproduce the experimental spectra very well over the entire time range and under different excitation conditions.

High-Performance Photocatalytic H2 Production Using a Binary Cu/TiO2/SrTiO3 Heterojunction

Cu/TiO₂/SrTiO₃ hybrid structures have been synthesized by the simple impregnation method from Cu/TiO₂ and SrTiO₃ systems. The structural and surface characterization stated that Cu/TiO₂/SrTiO₃ composites form an effective covering of SrTiO₃ by Cu/TiO₂. The heterostructured catalysts lead to an outstanding improved photoactivity for hydrogen production from methanol photoreforming that would be related with the efficient separation of charge pairs favored by the Cu/TiO₂/SrTiO₃ heterojunction. The best photoproduction is attained for the 30 wt % SrTiO₃ heterojunction showing 81.7 mmol/g H₂ after 6 h (leading to an apparent quantum yield of ca 1%), 1.7 times higher than that of bare Cu/TiO₂.

Femtosecond transient absorption spectroscopy investigation into the electron transfer mechanism in photocatalysis

Femtosecond transient absorption spectroscopy (fs-TAS) is a powerful technique for monitoring the electron transfer kinetics in photocatalysis. Several important works have successfully elucidated the electron transfer mechanism in heterojunction photocatalysts (HPs) using fs-TAS measurements, and thus a timely summary of recent advances is essential. This feature article starts with a thorough interpretation of the operating principle of fs-TAS equipment, and the fundamentals of the fs-TAS spectra. Subsequently, the applications of fs-TAS in analyzing the dynamics of photogenerated carriers in semiconductor/metal HPs, semiconductor/carbon HPs, semiconductor/semiconductor HPs, and multicomponent HPs are discussed in sequence. Finally, the significance of fs-TAS in revealing the ultrafast interfacial electron transfer process in HPs is summarized, and further research on the applications of fs-TAS in photocatalysis is proposed. This feature article will provide deep insight into the mechanism of the enhanced photocatalytic performance of HPs from the perspective of electron transfer kinetics.

Insights on Carbon Neutrality by Photocatalytic Conversion of Small Molecules into Value-Added Chemicals or Fuels

Photocatalytic conversion of small molecules (including H₂O, CO₂, N₂, CH₄, and benzene) into value-added chemicals or fuels (e.g., H₂, NH₃, C₂ ⁺, etc.) is a promising strategy to cope with both the worldwide increasing energy demand and greenhouse gas emission in both energy sectors and chemical industry, thus paving an effective way to carbon neutrality. On the other hand, compared with conventionally thermo- or electrocatalytic processes, photoactivation can convert these very stable small molecules by the unexhausted solar energy, so leading to store solar energy in chemical bonds. Thus, it can effectively reduce the reliance on the nonrenewable fossil fuels and avoid the substantial emission of hazardous gases such as CO₂, NO _x , and so on while producing valued-added chemicals. For example, semiconductors can absorb solar light to split H₂O into H₂ and O₂ or convert CO₂ to alcohols, which can then be used as zero or neutral carbon energy sources. Although many efforts have already been made on photocatalytic small molecule activation, the light-energy conversion efficiency is still rather moderate and the yield of aimed value-added chemicals cannot meet the requirement of large-scale application. The core for these artificial photocatalytic processes is to discover a novel photocatalyst with high efficiency, low cost, and excellent durability. Over the past two decades, the Tang group has discovered a few benchmark photocatalysts (such as dual-metal-loaded metal oxides, atomic photocatalysts, carbon-doped TiO₂, and polymer heterojunctions, etc.) and investigated them for photocatalytic conversion of the above-mentioned five robust molecules into value-added chemicals or liquid fuels. Besides, advanced photocatalytic reaction systems including batch and continuous flow membrane reactors have been studied. More importantly, the underlying reaction mechanism of these processes has been thoroughly analyzed using the state-of-the-art static and time-resolved spectroscopies. In this Account, we present the group's recent research progress in search of efficient photocatalysts for these small molecules' photoactivation. First, the strategies used in the group with respect to three key factors in photocatalysis, including light harvesting, charge separation, and reactant adsorption/product desorption, are comprehensively analyzed with the aim to provide a clear strategy for efficient photocatalyst design toward small and robust molecule photoactivation under ambient conditions. The application of in situ and operando techniques on charge carrier dynamics and reaction pathway analysis used in the group are next discussed. Finally, we point out the key challenges and future research directions toward each specific small molecule's photoactivation process.

TiO2 as a Nanozyme Mimicking Photolyase to Repair DNA Damage

Cyclobutane pyrimidine dimer (CPD) is the most abundant DNA photolesion, and it can be repaired by photolyases based on electron-transfer mechanisms. However, photolyase is absent in the human body and lacks stability for applications. Can one develop natural enzyme mimetics utilizing nanoparticles (termed nanozymes) to mimic photolyase in repairing DNA damage? Herein, we observe the successful reversal of thymine dimer T<>T to normal T base by TiO₂ under UVA irradiation. Time-resolved spectroscopy provides direct evidence that the photogenerated electron of TiO₂ transfers to T<>T, causing structural instability and initiating the repair process. T-T^- would then undergo bond cleavage to form T and T^-, and T^- returns an electron to TiO₂, finishing the photocatalytic cycle. For the first time, TiO₂ is discovered to exhibit photocatalytic properties similar to those of natural enzymes, pointing to its extraordinary application potential as a nanozyme to mimic photolyase in repairing DNA damage.