Organo-functionalized polyoxovanadates: crystal architecture and property aspects

Iso- and hetero-polyoxovanadium glycolates [VIV6O6(glyc)6MIII(OH)6]3- (M = V, Cr, Fe, and Al) encapsulating metal hydroxides

Polyoxovanadium glycolates (NH4)3[V6O6(glyc)6V(μ-OH)6]·10H2O (1-V7) (H2glyc = glycolic acid) and its derivatives added with ammonium sulfates (NH4)3[V6O6(glyc)6M(μ-OH)6][(NH4)2SO4]2·xH2O (M = Cr, x = 6, 2-CrV6; M = Fe, x = 7, 3-FeV6; M = Al, x = 6, 4-AlV6) were obtained through self-assembly and fully characterized. Compounds 1-4 are composed of the same fully reduced cyclic {VIV6O6} unit bridged by six glycolate ligands. The framework encapsulated an octahedral metal(III) hydroxide {M(OH)6} (M = V3+, Cr3+, Fe3+, and Al3+) in the center, forming an iso- or hetero-heptanuclear Anderson-type structure. Moreover, two sulfate anions capped the two sides of cyclic {V6O6} units in compounds 2-4. Each sulfate formed a strong triple hydrogen bond (2.657-2.829 Å) with the μ3-OH group of the hydroxide. The sulfate anions played important roles in the formation of layered structures in 2-4, while the clusters were stacked compactly through strong hydrogen bonds in 1-V7. Because of the different central metals, these heptanuclear clusters exhibited distinct electronic structures as well as redox and magnetic properties. Magnetic studies showed that compounds 1-3 exhibited weak antiferromagnetic interactions in decreasing order with Fe3+, V3+ and Cr3+, while 4-AlV6 displayed weak ferromagnetic interactions. Their relationships with the local environment of the FeV-cofactor in V-nitrogenase are also discussed.

Dual-nodes bridged cobalt-modified Keggin-type polyoxometalate-based chains for highly efficient CO2 photoconversion

The design of efficient catalysts for photocatalytic CO2 conversion is of great importance for the sustainable development of society. Herein, three polyoxometalate (POM)-based crystalline materials were formulated prepared by substituting transition metals and adjusting solvent acidity with 2-(2-pyridyl) benzimidazole (pyim) as the light-trapping ligand, namely {[SiW12O40][Co(pyim)2]2}·2C2H5OH (SiW12Co2), {[SiW12O40][Ni(pyim)2]2}·2C2H5OH (SiW12Ni2), and {[SiW12O40][Mn(pyim)2]2}·2C2H5OH (SiW12Mn2). X-ray crystallography diffraction analysis indicates that the three complexes exhibit isostructural properties, and form a stable one-dimensional chain structure stabilized by two [M(pyim)2]22+ (M = Co, Ni, and Mn) fragments serving as dual-nodes to the adjacent SiW12 units. A comprehensive analysis of the structural characterization and photocatalytic CO2 reduction properties is presented. Under light irradiation, SiW12Co2 exhibited a remarkable CO generation rate of 10 733 μmol g-1 h-1 with a turnover number of 328, outperforming most of the reported heterogeneous POM-based photocatalysts. Besides, cycling tests revealed that SiW12Co2 is an efficient and stable photocatalyst with great recyclability for at least four successive runs. This study proves that the successful incorporation of diverse transition metals into the POM anion could facilitate the development of highly efficient photocatalysts for the CO2RR.

Vanadium-Silsesquioxane Nanocages as Heterogeneous Catalysts for Synthesis of Quinazolinones

The functionalization of polyoxovanadate clusters is promising but of great challenge due to the versatile coordination geometry and oxidation state of vanadium. Here, two unprecedented silsesquioxane ligand-protected "fully reduced" polyoxovanadate clusters were fabricated via a facial solvothermal methodology. The initial mixture of the two polyoxovanadate clusters with different colors and morphologies (green plate V14 and blue block V6) was successfully separated as pure phases by meticulously controlling the assembly conditions. Therein, the V14 cluster is the highest-nuclearity V-silsesquioxane cluster to date. Moreover, the transformation from a dimeric silsesquioxane ligand-protected V14 cluster to a cyclic hexameric silsesquioxane ligand-protected V6 cluster was also achieved, and the possible mechanism termed "ligand-condensation-involved dissociation reassembly" was proposed to explain this intricate conversion process. In addition, the robust V6 cluster was served as a heterogeneous catalyst for the synthesis of important heterocyclic compounds, quinazolinones, starting from 2-aminobenzamide and aldehydes. The V6 cluster exhibits high activity and selectivity to access pure quinazolinones under mild conditions, where the high selectivity was attributed to the confinement effect of the macrocyclic silsesquioxane ligand constraining the molecular freedom of the reaction species. The stability and recyclability as well as the tolerance of a wide scope of aldehyde substrates endow the V6 cluster with a superior performance and appreciable potential in catalytic applications.

Heterometal Dopant Changes the Mechanism of Proton-Coupled Electron Transfer at the Polyoxovanadate-Alkoxide Surface

The transfer of two H-atom equivalents to the titanium-doped polyoxovanadate-alkoxide, [TiV5O6(OCH3)13], results in the formation of a V(III)-OH2 site at the surface of the assembly. Incorporation of the group (IV) metal ion results in a weakening of the O-H bonds of [TiV5O5(OH2)(OCH3)13] in comparison to its homometallic congener, [V6O6(OH2)(OCH3)12], resembling more closely the thermodynamics reported for the one-electron reduced derivative, [V6O6(OH2)(OCH3)12]1-. An analysis of early time points of the reaction of [TiV5O6(OCH3)13] and 5,10-dihydrophenazine reveals the formation of an oxidized substrate, suggesting that proton-coupled electron transfer proceeds via initial electron transfer from substrate to cluster prior to proton transfer. These results demonstrate the profound influence of heterometal dopants on the mechanism of PCET with respect to the surface of the assembly.

Copper-containing POM-based hybrid P2Mo22V4Cu4 nanocluster as heterogeneous catalyst for the light-driven hydroxylation of benzene to phenol

The current traditional phenol production process has many shortcomings, and the efficient and clean photocatalytic one-step oxidation to phenol is gradually attracting attention. Heteropolyacids (PMo10V2) with high-density Lewis acid active sites and excellent photoelectron transfer ability are ideal choices for catalytic reactions. In this study, a copper-modified isolated dimeric hybrid nanocluster, [Cu(pyim)2]2[Cu(pyim)2(P2MoVI20MoV2VIV4O82)]2·(H2O) (pyim = [2-(pyridin-2-yl)imidazole]), was synthesized by a convenient hydrothermal method. The structural analysis demonstrated that the compound was composed of metal-organic complexes containing pyim ligands, Keggin-type heteropolyacids, and transition metal copper ions. Remarkably, this not only solves the difficulty that the heteropolymeric acid cannot be recovered by dissolving in the solvent but also introduces the copper atom as a second active center. The catalyst exhibited a benzene conversion of 15.6% and a selectivity of 85.2% in a mixed solution of acetonitrile and acetic acid under optimal reaction conditions. After four catalytic cycles, the PXRD pattern proved that the catalyst was still stable. This study provides a good idea for photocatalytic reactions and other environmental applications.

Synthesis of Phosphovanadate-Based Porous Inorganic Frameworks with High Proton Conductivity

Materials with high proton conductivity have attracted significant attention for their wide-ranging applications in proton exchange membrane fuel cells. However, the design of new and efficient porous proton-conducting materials remains a challenging task. The structure-controllable and highly stable metal phosphates can be synthesized into layer or frame networks to provide proton transport capabilities. Herein, we have successfully synthesized three isomorphic metal phosphovanadates, namely, H2(C2H10N2)2[MII(H2O)2(VIVO)8(OH)4(PO4)4(HPO4)4] (C2H8N2 = 1,2-ethylenediamine; M = Co, Ni, and Cu), by the hydrothermal method employing ethylenediamine as a template. These pure inorganic open frameworks exhibit a cavity width ranging from 6.4 to 7.5 Å. Remarkably, the proton conductivity of compounds 1-3 can reach 1 × 10-2 S·cm-1 at 85 °C and 97% relative humidity (RH), and they can remain stable at high temperatures as well as long-term stability. This work provides a novel strategy for the development and design of porous proton-conducting materials.

Synthesis and Structure of High-Nuclearity Carboxylate-Modified Heteropolyoxovanadate Serving as a Heterogeneous Catalyst for Selective Oxidation of Alkylbenzenes

A high-nuclearity carboxylic-modified heteropolyoxovanadate, Na2K10H15[P8VIV24(tart)15(H2O)15(OH)O51]·58H2O [1, tart = C4H2O6], has been successfully synthesized by a conventional aqueous method under mild conditions. The crystallographic study reveals that compound 1 crystallizes in the tetragonal I41/a space group and is composed by a trilayer saddle-like polyoxoanion {P8V24}. Two {V3(tart)(H2O)O11} as linking units bridge the top {P4VIV9(tart)7(H2O)4(OH)O23} and the bottom {P4VIV9(tart)6(H2O)9O22} layers via tartrate ligands and {PO4} tetrahedra, resulting in a 24-nuclearity POV skeleton structure. More interestingly, compound 1 serves as a heterogeneous catalyst for the selective oxidation of diphenylmethanes with 96.2% conversion and 93.6% selectivity under the optimized conditions.

Recent advances in oxidative catalytic applications of polyoxovanadate-based inorganic-organic hybrids

Polyoxovanadates (POVs) have received widespread attention in catalytic applications due to their various structures and remarkable redox properties. By introducing a second transition metal, POV-based inorganic-organic hybrid (POVH) catalysts show increasing stability and more catalytic active sites compared with pure POVs. In this perspective article, POVH materials as oxidative catalysts have been classified into two main categories according to the interactions between transition metal-complex units and POV clusters: (i) hybrids with metal-organic units act as isolated cations and (ii) hybrids with an organic ligand coordinate to the second transition metal, which is further linked to a POV cluster via oxygen bridges directly or indirectly to give zero-, one-, two- or three-dimensional supramolecular structures. The oxidative conversion of organic compounds, including thiophene derivatives, thioethers, alkanes, alcohols, and alkenes, and oxidative detoxification of a sulfur mustard simulant or degradation of lignin, along with the oxidative photo/electrocatalytic transformation of organic compounds catalyzed by POVH materials, are discussed in detail. Furthermore, the challenges and prospects toward the development of POVH catalysts are explored briefly from our perspectives.

Platonic and Archimedean solids in discrete metal-containing clusters

Metal-containing clusters have attracted increasing attention over the past 2-3 decades. This intense interest can be attributed to the fact that these discrete metal aggregates, whose atomically precise structures are resolved by single-crystal X-ray diffraction (SCXRD), often possess intriguing geometrical features (high symmetry, aesthetically pleasing shapes and architectures) and fascinating physical properties, providing invaluable opportunities for the intersection of different disciplines including chemistry, physics, mathematical geometry and materials science. In this review, we attempt to reinterpret and connect these fascinating clusters from the perspective of Platonic and Archimedean solid characteristics, focusing on highly symmetrical and complex metal-containing (metal = Al, Ti, V, Mo, W, U, Mn, Fe, Co, Ni, Pd, Pt, Cu, Ag, Au, lanthanoids (Ln), and actinoids) high-nuclearity clusters, including metal-oxo/hydroxide/chalcogenide clusters and metal clusters (with metal-metal binding) protected by surface organic ligands, such as thiolate, phosphine, alkynyl, carbonyl and nitrogen/oxygen donor ligands. Furthermore, we present the symmetrical beauty of metal cluster structures and the geometrical similarity of different types of clusters and provide a large number of examples to show how to accurately describe the metal clusters from the perspective of highly symmetrical polyhedra. Finally, knowledge and further insights into the design and synthesis of unknown metal clusters are put forward by summarizing these "star" molecules.

Polyoxovanadate-Based Cyclomatrix Polyphosphazene Microspheres as Efficient Heterogeneous Catalysts for the Selective Oxidation and Desulfurization of Sulfides

The [V₆O₁₃]^2- cluster is successfully immobilized to the polymeric framework of cyclomatrix polyphosphazene via the facile precipitation polymerization between the phenol group symmetrically modified [V₆O₁₃]^2- and hexachlorocyclotriphosphazene. The structure of the as-prepared polyoxometalate-containing polyphosphazene (HCCP-V) was characterized by FT-IR, XPS, TGA, BET, as well as SEM and zeta potential. The presence of a rigid polyoxometalate cluster not only supports the porous structure of the polymeric framework but also provides an improved catalytic oxidation property. By using H₂O₂ as an oxidant, the as-prepared HCCP-V exhibited improved catalytic oxidation activity toward MPS, DBT, and CEES, which can achieve as high as 99% conversion. More importantly, the immobilization of POMs in the network of cyclomatrix polyphosphazene also provides better recyclability and stability of the heterogeneous catalyst.

Surface Engineering Promoted Insulin-Sensitizing Activities of Sub-Nanoscale Vanadate Clusters through Regulated Pharmacokinetics and Bioavailability

The therapeutic application of vanadium compounds is plagued by their poor bioavailability and potential adverse effects. Herein, 1 nm polyoxovanadate (POV) clusters are functionalized with alkyl chains of various lengths and studied for the effect of surface engineering on their preclinical pharmacokinetics and typical insulin-sensitizing activity. The concentrations of surface engineered POVs in plasma, urine, and feces are monitored after a single administration to rats. The POVs exhibit a two-compartment profile of in vivo kinetics, and the surface engineering effect plays an important role in renal clearance of the POVs comparable to small molecules. POVs functionalized with long alkyl chains show much shorter elimination half time t_1/2β and higher elimination fractions (50%) within 48 h than pristine POVs, suggesting favorable elimination kinetics to mitigate the possible side effects of vanadium. Meanwhile, long alkyl chain modification leads to a 76% increment of oral bioavailability in contrast to unmodified POVs. As suggested by glucose tolerance tests and sub-chronic toxicity tests, the above two factors contribute to the enhanced therapeutic efficacy of POVs while mitigating their adverse effects. The surface engineering protocol provides a feasible approach to the optimization of the bioavailability and pharmacokinetic properties of POVs for promoted insulin-sensitizing activities.

Two 1D Anderson-Type Polyoxometalate-Based Metal-Organic Complexes as Bifunctional Heterogeneous Catalysts for CO2 Photoreduction and Sulfur Oxidation

Sulfur oxides from the combustion of petrol and excessive emissions of carbon dioxide (CO₂) are currently the main causes of environmental pollution. Considerable interest has been paid to solving the challenge, and catalytic reactions seem to be the desired choice. Due to the high density of Lewis acid active sites, polyoxometalates are considered to be the ideal choice for these catalytic reactions. Herein, two captivating polyoxometalate-based metal-organic complexes, formulated as [Co(H₂O)₂DABT]₂[CrMo₆(OH)₅O₁₉] ({Co-CrMo₆}) and [Zn(H₂O)₂DABT]₂[CrMo₆(OH)₅O₁₉] ({Zn-CrMo₆}) (DABT = 3,3'-diamino-5,5'-bis(1H-1,2,4-triazole)) were successfully obtained under hydrothermal conditions. The structural analysis demonstrates that {Co-CrMo₆} and {Zn-CrMo₆} are isostructural with two different transition metal (Co/Zn) ions based on quadridentate Anderson-type [CrMo₆(OH)₅O₁₉]^4- polyanions. A fan-shaped unit of {Co-CrMo₆}/{Zn-CrMo₆} is linked to generate a one-dimensional (1D) ladder-like structure. Intriguingly, benefitting from rich Co centers with a suitable energy band structure, {Co-CrMo₆} displays better photocatalytic activity than {Zn-CrMo₆} for converting CO₂ into CO, endowing the CO formation of 1935.3 μmol g^-1 h^-1 with high selectivity. Meanwhile, {Co-CrMo₆} also exhibits a satisfactory removal rate of 99% for oxidizing dibenzothiophene at 50 °C, which suggests that {Co-CrMo₆} may be utilized as a potential dual functional material with immense prospects in photocatalytic CO₂ reduction and sulfur oxidation for the first time.

Successive constructions of regular tetra-, hexa- and octanuclear microporous polyoxovanadates(III) for gas adsorption

Pyrazole-assisted tetranuclear microporous polyoxovanadates(III) (POVs) (NH₄)₂K₂[V₄(μ₂-OH)₄(ox)₄(pz)₄]·9H₂O (1, ox = oxalate and pz = pyrazole) and (NH₄)₂Na₂[V₄(μ₂-OH)₄(ox)₄(4-mpz)₄]·7H₂O (2, 4-mpz = 4-methylpyrazole) have been constructed in reduced media, along with their triazole neutral hexa- and octanuclear products K₂[V₆(μ₂-OH)₆(ox)₆(Hdatrz)₆]Cl₂·29.5H₂O (3) and [V₈(μ₂-OH)₈(SO₃)₈(Hdatrz)₈]·38H₂O (4, Hdatrz = 1H-1,2,4-triazole-3,5-diamine) successively. Both polyanionic structures of 1 and 2 share similar inorganic building blocks that consist of regular {V₄(μ₂-OH)₄} skeletons with an inner diameter of 2.8 Å, while a paddle wheel-shaped cluster 3 contains a {V₆(μ₂-OH)₆} skeleton with two chlorides encapsulated around the center of the ring, occupying a hole of 3.7 Å. An interesting isolated intrinsic polyoxometalate-based metal-organic framework (POMOF) 4 exists as an octanuclear petaloid-like skeleton {V₈(μ₂-OH)₈(SO₃)₈} with an inner diameter of 5.2 Å. Bond valence sum calculations manifest that all V ions have severely reduced +3 oxidation states in 1-4, which are supported by charge balance, structural and magnetic data. Moreover, gas adsorptions indicate that 1, 2 and 4 can adsorb CO₂ and O₂ more favorably than N₂, CH₄ and H₂ gases. Compared with 1 and 2, due to the functionalization of microchannels with Lewis base amino and hydroxy groups and uncoordinated azolate N-donors inside POMOF 4, it should have notable affinities toward CO₂ adsorption.

An isolated doughnut-like molybdenum(V) cobalto-phosphate cluster exhibiting excellent photocatalytic performance for carbon dioxide conversion

An isolated doughnut-like molybdenum(V) cobalto-phosphate cluster with the formula (C₁₁NH₁₀)₂{[Co(H₂O)₆]@[H₂₉Co₁₆Mo₁₆(H₂O)₁₆(PO₄)₂₄O₃₆]}(H₂PO₄)·25H₂O has been successfully synthesized by a hydrothermal method. Single crystal X ray diffraction analysis shows that four {Co₄O₆₀} tetramers and eight {Mo₂O₁₀} dimers are linked by oxygen atoms and phosphate groups to construct a doughnut-type structure for [Co@{Co₁₆Mo₁₆}], in which one [Co^II(H₂O)₆]²⁺ octahedron is enclosed. More importantly, [Co@{Co₁₆Mo₁₆}] exhibits promising photocatalytic performance for CO₂ reduction with the CO formation rate of 6764.3 μmol g^-1 h^-1 and the selectivity of 96.89%. In addition, the cycling test indicated that [Co@{Co₁₆Mo₁₆}] can be reused for at least four cycles without significant loss of catalytic activity. The result of this work may provide new insight for the synthesis of highly efficient POM-based photocatalysts for CO₂ reduction.

Three Si-substituted polyoxovanadates as efficient catalysts for Knoevenagel condensation and selective oxidation of styrene to benzaldehyde

Three new Si-substituted polyoxovanadates (POVs), [Cd₂(dien)₂][Cd(dien)][Cd(Hdien)₂][V₁₅Si₆O₄₆(OH)₂(H₂O)]·7H₂O (1), [Co(enMe)₂]₃[Co₂(enMe)₂(H₂O)₂][V₁₆Si₄O₄₄(OH)₂(H₂O)]·6H₂O (2), and [Co(teta)]₄[V₁₆Si₄O₄₂(OH)₄(H₂O)]·10H₂O (3) (dien = diethylenetriamine; enMe = 1,2-diaminopropane; teta = triethylenetetramine) were synthesized by the hydrothermal method and characterized. Structural analysis sheds light on the fact that the {V₁₅Si₆O₄₈}/{V₁₆Si₄O₄₆} clusters of compounds 1-3 were formed by replacing {VO₅} square pyramids in the classical {V₁₈O₄₂} cluster with {Si₂O₇} units. Compound 1 is a 2D bilayer structure formed by the [V₁₅Si₆O₄₆(OH)₂(H₂O)]^10- cluster and two types of bridging Cd complexes containing binuclear groups [Cd₂(dien)₂]⁴⁺. Compound 2 is a 3D framework constructed from the [V₁₆Si₄O₄₄(OH)₂(H₂O)]^10- cluster and two types of Co complex fragments including binuclear [Co₂(enMe)₂(H₂O)₂]⁴⁺. In compound 3, the [V₁₆Si₄O₄₂(OH)₄(H₂O)]^8- cluster is connected with bridging [Co(teta)]²⁺ to expand into a 2D network. Compounds 1 and 3 represent the first 2D assemblies based on a vanadosilicate cluster. 1-3 served as heterogeneous catalysts and exhibited highly efficient catalytic activities for the Knoevenagel condensation under mild ambient conditions with low catalyst loading, featuring the open Lewis base {V₁₅Si₆O₄₈}/{V₁₆Si₄O₄₆} sites and Lewis acid Cd²⁺/Co²⁺ sites. The conversion of benzaldehyde was up to 99.3% in 80 min at room temperature using 1 as a heterogeneous catalyst with only 0.37% catalyst loading. Moreover, compounds 1-3 as catalysts for selective oxidation of styrene to benzaldehyde exhibited excellent catalytic performance, high selectivity and could be readily recycled. Most strikingly, compound 1 showed excellent catalytic performance with 97.6% conversion of styrene and 100% selectivity of benzaldehyde in 15 min. In addition, the catalytic activity of catalyst 1 was well maintained after five cycling reactions.

Two POM-based compounds containing Zn-capped Keggin anions as decent heterogeneous catalysts for sulfur oxidation and cycloaddition of CO2 reactions

Carbon dioxide (CO2) and the combustion of sulfide in gasoline are the main causes of air pollution. Great deal of attention has been committed to solving the problem and the...

Two Ni-Substituted Trilacunary Keggin-Type Polyoxometalates: Syntheses, Crystal Structures, NLO Studies, and Magnetic Properties

Two Ni-substituted polyoxometalates (NiSPs), [Ni₆(Py)₆(H₂O)₅(μ₃-OH)₃(PW₉O₃₄)]₂·10H₂O (1), [Ni₇(Py)₆(Im)(H₂O)₅O(WO₄)(μ₃-OH)₃(H₂PW₉O₃₄)]·3H₂O (2) (Py = pyridine, Im = imidazole), were successfully hydrothermally synthesized. Compounds 1 and 2 have significantly different configurations by introducing different amounts of imidazole ligands. For compound 1, two malposed {Ni₆(Py)₆PW₉} units that are face to face are bridged by two Ni-O-W bonds to constitute an isolated dimeric structure. Differently, the {Ni₇(Py)₆(Im)PW₉}₂ dimer in compound 2 connects with four adjacent dimers by four {WO₄} groups in an interesting two-dimensional (2-D) arrangement. The magnetism of compounds 1 and 2 was studied, and magnetic test results demonstrated that both compounds have ferromagnetic interactions between the nickel centers. Meanwhile, the third-order nonlinear optical (NLO) measurements indicated that compound 1 can serve as potential nonlinear optical materials.

Three Polyoxovanadates-Based Organic-Inorganic Hybrids: Structural Variation, Bifunctional Electrocatalytic Activities, and Computational Studies

Three bimetallic organic-inorganic hybrids based on the [V₂O₆]^2- building unit, [Cu(pty)(V₂O₆)]·H₂O (1), [Cu(pty)(V₂O₆)] (2), [Cu(tpy)(V₂O₆)] (3), (pty = 4'-(4″-pyridyl)-2,2':6',2″-terpyridine, tpy = 2,2':6',2″-terpyridine), were synthesized via a one-pot method. Hybrid 1 has a 1D straight chain architecture with [V₂O₆]^2- clusters and Cu-pty complexes; hybrids 2 and 3 possess a 2D sheet structure including 10-membered rings assembled from four [Cu(pty)]²⁺ motifs and six [V₂O₆]^2- clusters in 2, and two [Cu(tpy)]²⁺ units and eight [V₂O₆]^2- clusters in 3. Noteworthy, hybrids 1-3 can be employed as bifunctional electrocatalysts for electroreduction of nitrite and electrooxidation of ascorbic acid. Additionally, theoretical calculations including the molecular electrostatic potential and the frontier molecular orbital were performed to estimate the electronic structure of hybrids 1-3. The natural bond orbital analysis was also calculated to interpret the electron charge distribution.

A Purely Inorganic Quasi-Keggin Polyoxometalate for Photocatalytic Conversion of Carbon Dioxide to Carbon Monoxide

A pure inorganic cluster, H₄₇ Na₂ Co₄ Mo₂₄ (PO₄ )₁₁ O₇₂  ⋅ 15H₂ O (denoted as {Co₄ Mo₂₄ }), has been successfully synthesized by hydrothermal method. Notably, the assembly of a central {Co₂ PO₄ } tetrahedron and four peripheral {Co[P₄ Mo₆ ]} fragments gives rise to a rare "quasi-Keggin" structure of {Co₄ Mo₂₄ }, in which Co linkers continue to bridge adjacent substructures, resulting in the generation of 3D framework with large cavities. Benefitting from the combination of strong reductive {P₄ Mo₆ } units and Co active centers, the photocatalytic system with {Co₄ Mo₂₄ } as heterogeneous catalyst exhibits excellent activity for CO₂ conversion to CO, offering the CO formation rate of 1848.3 μmol g^-1 h^-1 with high selectivity of 97.0 %. Besides, thermogravimetric and X-ray diffraction analysis confirm that {Co₄ Mo₂₄ } can maintain stable during the photocatalytic reaction process.