Improving the single-molecule magnet properties of two pentagonal bipyramidal Dy3+ compounds by the introduction of both electron-withdrawing and -donating groups

In situ hydrolysis of a carbophosphazene ligand leads to one-dimensional lanthanide coordination polymers. Synthesis, structure and dynamic magnetic studies

An in situ hydrolysis of the P-Cl bonds of the carbophosphazene [{NC(NMe2)}2{NPCl2}] (LPCl2) in the presence of hydrated lanthanide(III) nitrates in a dichloromethane and methanol (2 : 1) solvent mixture afforded a series of novel 1D coordination polymers: [{Ln(LHPO2)3(NO3)2(CH3OH)(H2O)} (Cl)]n {where Ln(III) = Gd (1), Tb (2), Dy (3), or Er (4) and LHPO2 is the hydrolyzed carbophosphazene (LPCl2) ligand}. X-ray crystallographic analysis revealed that complexes 1-4 are isostructural and crystallized in the monoclinic crystal system having P21/c space group. The coordination polymers are formed because of the involvement of the geminal P(O)(OH) moieties of the carbophosphazene ligand. Each lanthanide(III) ion is 9-coordinate (9O) in a distorted muffin geometry. Magnetic measurements revealed that both DyIII and ErIII analogues exhibit field-induced single-molecule magnet (SMM) behavior at 0.8 kOe and 2.2 k Oe, respectively. At such dc fields, the dynamic magnetic susceptibility displays complex behavior with a triple magnetic relaxation contribution for 3, while two contributions were identified for 4. The observed static and dynamic magnetic behavior for complexes 1-4 were further rationalized with the aid of BS-DFT and CASSCF/SO-RASSI/SINGLE_ANISO calculations.

Constructing high axiality mononuclear dysprosium molecular magnets via a regulation-of-co-ligands strategy

Two lanthanide complexes with formulae [DyIII(LN5)(pentafluoro-PhO)3] (1) and [DyIII(LN5)(2,6-difluoro-PhO)2](BPh4) (2) (LN5 = 2,14-dimethyl-3,6,10,13,19-pentaazabicyclo[13.3.1]nonadecal (19),2,13,15,17-pentaene) were structurally and magnetically characterized. DyIII ions lie in the cavity of a five coordinate nitrogen macrocycle, and in combination with the introduction of multi-fluorinated monodentate phenoxyl coligands a high axiality coordination symmetry is built. Using the pentafluorophenol co-ligand, complex 1 with a D2d coordination environment, is obtained and displays moderate single-molecule magnets (SMMs) behavior. When difluorophenol co-ligands were used, a higher local axisymmetric pentagonal bipyramidal coordination geometry was observed in complex 2, which displays apparent slow magnetic relaxation behavior with a hysteresis temperature of up to 5 K. Further magnetic studies of diluted samples combined with ab initio calculations indicate that the high axiality plays a crucial role in suppressing quantum tunneling of magnetization (QTM) and consequently results in good slow magnetic relaxation behavior. Different fluoro-substituted phenoxyl co-ligands have phenoloxy oxygen atoms with different electrostatic potentials as well as a different number of phenoloxy coligands along the magnetic axis, resulting in different ligand field strengths and coordination symmetries.

Unravelling the role of spin-vibrational coupling in designing high-performance pentagonal bipyramidal Dy(iii) single ion magnets

At the cutting edge of high-performance single-molecule magnets (SMMs) lie lanthanide-based complexes, renowned for their potent magnetic anisotropy. SMMs containing one metal centre are defined as single-ion magnets (SIMs). The performance of SMMs is measured generally via the barrier height for magnetisation reversal (Ueff) and blocking temperature (TB), below which the magnetisation is fully frozen. To enhance the Ueff and TB values in lanthanide-based SMMs, the static crystal field splitting of mJ levels has been effectively adjusted through ligand design, leveraging the oblate/prolate ground state 4f electron density shape. However, the maximum fine-tuning achievable through ligand design, known as the axial limit, has already been reached in this class of compounds. This necessitates new design principles to enhance SMM characteristics to better suit end-user applications. Among other avenues that can be explored to improve SMM characteristics, a deeper understanding of spin-phonon coupling is critical to advancing TB values. However, there are only a handful of examples where this has been deciphered. In this work, using a combination of DFT and ab initio CASSCF calculations, we have performed spin-phonon calculations on five classes of pentagonal bipyramidal Dy(iii) SIMs exhibiting TB values in the range of 4.5 K to 36 K ([Dy(bbpen)Br] (1, H2bbpen = N,N'-bis(2-hydroxybenzyl)-N,N'-bis(2-methylpyridyl)ethylenediamine), [Dy(OCMe3)Br(THF)5][BPh4] (2) [Dy(OSiMe3)Br(THF)5] [BPh4] (3), [Dy(LN5)(Ph3SiO)2](BPh4)·CH2Cl2 (4) and [L2Dy(H2O)5][I]3·L2·H2O (5, L = tBuPO(NHiPr)2)). Unlike the method employed elsewhere for the calculation of spin-phonon coupling, in this work, we have employed a set of criteria and intuitively selected vibrational modes to perform the spin-phonon coupling analysis. The approach provided here not only reduces the computational cost significantly but also suggests chemical intuition to improve the performance of this class of compounds. Our calculations reveal that low-energy vibrational modes govern the magnetisation relaxation in these SIMs. A flexible first coordination sphere found on some of the complexes was found to be responsible for low-energy vibrations that flip the magnetisation, reducing the TB values drastically (complexes 2 and 3). On the other hand, a rigid first coordination sphere and a stiff ligand framework move the spin-vibrational coupling that causes the relaxation to lie beyond the secondary coordination sphere, resulting in an increase in TB values. Our calculations also reveal that not only the atoms in the first coordination sphere but also those in the secondary coordination sphere affect the performance of the SMMs. Learning from this exercise, we have undertaken several in silico models based on these vibrations to improve the TB values. Some of these predictions were correlated with literature precedents, offering confidence in the methodology employed. To this end, our comprehensive investigation, involving twenty-three molecules/models and five sets of geometries for pentagonal bipyramidal Dy(iii) single-ion magnets (SIMs), unveils a treasure trove of chemically sound design clues, poised to enhance the TB values in this fascinating molecular realm.

Synthesis, Characterization, and Reactivity Studies of New Cyclam-Based Y(III) Complexes

[(Bn2Cyclam)Y(N(SiMe3)2)] was prepared by reaction of H2Bn2Cyclam with Y[N(SiMe3)2]3. The protonation of the macrocycle ligand in [(Bn2Cyclam)Y(N(SiMe3)2)] is observed upon reaction with [HNMe3][BPh4] leading to the formation of [(HBn2Cyclam)Y(N(SiMe3)2)][BPh4]. DFT analysis of [(Bn2Cyclam)Y(N(SiMe3)2)] showed that the HOMO is located on the anionic nitrogen atoms of the cyclam ring indicating that protonation follows orbital control. Addition of H2Bn2Cyclam and H2(3,5-tBu2Bn)2Cyclam to a 1:3 mixture of YCl3 and LiCH2SiMe3 in THF resulted in the formation of [((C6H4CH2)BnCyclam)Y(THF)(µ-Cl)Li(THF)2] and [Y{(η3-3,5-tBu2Bn)2Cyclam}Li(THF)], respectively. The reaction of H23,5-tBu2Bn2Cyclam with Y(CH2SiMe3)3(THF)2 was studied and monitored by a temperature variation NMR experiment revealing the formation of [(3,5-tBu2Bn2Cyclam)Y(CH2SiMe3)]. Preliminary catalytic assays have shown that [Y{(η3-3,5-tBu2Bn)2Cyclam}Li(THF)] is a very efficient catalyst for the intramolecular hydroamination of 2,2-diphenyl-pent-4-enylamine.

Perfluoroalkyl Chain Length Effect on Crystal Packing and [LnO8] Coordination Geometry in Lanthanide-Lithium β-Diketonates: Luminescence and Single-Ion Magnet Behavior

Functionalized perfluoroalkyl lithium β-diketonates (LiL) react with lanthanide(III) salts (Ln = Eu, Gd, Tb, Dy) in methanol to give heterobimetallic Ln-Li complexes of general formula [(LnL₃)(LiL)(MeOH)]. The length of fluoroalkyl substituent in ligand was found to affect the crystal packing of complexes. Photoluminescent and magnetic properties of heterobimetallic β-diketonates in the solid state are reported. The effect of the geometry of the [LnO₈] coordination environment of heterometallic β-diketonates on the luminescent properties (quantum yields, phosphorescence lifetimes for Eu, Tb, Dy complexes) and single-ion magnet behavior (U_eff for Dy complexes) is revealed.

Dy4, Dy5, and Ho2 Complexes of an N3O2 Aminophenol Donor: A Dy5-µ3-Peroxide Single Molecule Magnet

The reactivity of the new flexible potentially pentadentate N₃O₂ aminophenol ligand H₄L^r (2,2'-((pyridine-2,6-diylbis(methylene))bis(azanediyl))diphenol) towards different dysprosium salts and holmium(III) nitrate was investigated. Accordingly, this reactivity seems to greatly depend on the metal ion and salt employed. In this way, the reaction of H₄L^r with dysprosium(III) chloride in air leads to the oxo-bridged tetranuclear complex [Dy₄(H₂L^r)₃(Cl)₄(μ₃-O)(EtOH)₂(H₂O)₂]·2EtOH·H₂O (1·2EtOH·H₂O), while the same reaction just changing the chloride salt by the nitrate one renders the peroxo-bridged pentanuclear compound [Dy₅(H₂L^r)₂(H_2.5L^r)₂(NO₃)₄(µ₃-O₂)₂]·2H₂O (2·2H₂O), where both peroxo ligands seem to come from the fixation and reduction of atmospheric oxygen. However, if holmium(III) nitrate is used instead of dysprosium(III) nitrate, no evidence of a peroxide ligand is observed, and the dinuclear complex {[Ho₂(H₂L^r)(H₃L^r)(NO₃)₂(H₂O)₂](NO₃)} 2.5H₂O (3·2.5H₂O) is isolated. The three complexes were unequivocally characterized by X-ray diffraction techniques, and their magnetic properties were analyzed. Thus, while the Dy₄ and Ho₂ complexes do not show magnet-like behavior even in the presence of an external magnetic field, 2·2H₂O is a single molecule magnet, with an U_eff barrier of 61.2 K (43.2 cm^-1). This is the first homonuclear lanthanoid peroxide SMM, which also shows the highest barrier among the reported 4f/3d peroxide zero field SMMs to date.

Axial Ligand as a Critical Factor for High-Performance Pentagonal Bipyramidal Dy(III) Single-Ion Magnets

The choice of axial ligands is of great importance for the construction of high-performance Dy-based single-molecule magnets (SMMs). Here, combining axial ligands Ph₃SiO^- (anion of triphenylsilanol) and 2,6-dichloro-4-nitro-PhO^- (the anion of 2,6-dichloro-4-nitrophenol) with a neutral macrocyclic ligand 2,14-dimethyl-3,6,10,13,19-pentaazabicyclo[13.3.1]nonadeca-1(19),2,13,15,17-pentaene (L₂^N5) generates two new pentagonal bipyramidal Dy(III) complexes [Dy^III(L₂^N5) (X)₂](BPh₄) (X = Ph₃SiO^-, 1; 2,6-dichloro-4-nitro-PhO^-, 2) with strong axial ligand fields. Magnetic characterizations show that 1 possesses a large energy barrier above 1000 K and a magnetic hysteresis up to 9 K, whereas 2 only displays field-induced peaks of alternating-current susceptibilities without the hysteresis loop, even though 2 has a similar coordination geometry with 1. Detailed Ab initio calculations indicate an apparent difference in the axial negative charge between both complexes, which is caused by the diverse electron-donating properties of the axial ligands. The present work provides an efficient strategy to enhance the SMMs' properties, which highlights that the electron-donating property of the axial ligands is especially important for constructing the high-performance Dy-based SMMs.

Impact of Ligand Substituents on the Magnetization Dynamics of Mononuclear DyIII Single-Molecule Magnets

Two mononuclear Dy^III single-molecule magnets with different ligand substituents located far from the coordinating atoms, [Dy(L-NO₂)(NO₃)] (1) and [Dy(L-Me)(NO₃)] (2), and their diamagnetic-ion diluted analogues, 1' and 2', were structurally and magnetically characterized. 1 and 2 have nearly identical coordination environments of Dy^III ions with D_2d symmetry but different magnetization dynamics. No Orbach process was observed for 1 and 1' in the testing temperature and frequency range, but effective energy barriers of 575 and 829 K for 2 and 2' were obtained, respectively. The opened hysteresis loops were observed until 6 K for 1 and 10 K for 2. Ab initio calculations reveal that the energy gaps between ground and low-lying excited states of 2 are higher than those of 1 and the relaxation rate through quantum tunneling of magnetization of 2 is lower than that of 1 due to the electronic effect of the axial coordinating oxygen atoms influenced by ligand substitutions.

Dinuclear Fluoride Single-Bridged Lanthanoid Complexes as Molecule Magnets: Unprecedented Coupling Constant in a Fluoride-Bridged Gadolinium Compound

A new synthetic method allows isolating fluoride-bridged complexes Bu₄N{[M(3NO₂,5Br-H₃L^1,1,4)]₂(μ-F)} (M = Dy, 1; M = Ho, 2; M = Gd, 3) and Bu₄N{[Dy(3Br,5Cl-H₃L^1,2,4)]₂(μ-F)}·2H₂O, 4·2H₂O. The crystal structures of 1·5CH₃C₆H₅,·2·2H₂O·0.75THF, 3, and 4·2H₂O·2THF show that all of them are dinuclear compounds with linear single fluoride bridges and octacoordinated metal centers. Magnetic susceptibility measurements in the temperature range of 2–300 K reveal that the Gd^III ions in 3 are weakly antiferromagnetically coupled, and this constitutes the first crystallographically and magnetically analyzed gadolinium complex with a fluoride bridge. Variable-temperature magnetization demonstrates a poor magnetocaloric effect for 3. Alternating current magnetic measurements for 1, 2, and 4·2H₂O bring to light that 4·2H₂O is an SMM, 1 shows an SMM-like behavior under a magnetic field of 600 Oe, while 2 does not show relaxation of the magnetization even under an applied magnetic field. In spite of this, 2 is the first fluoride-bridged holmium complex magnetically analyzed. DFT and ab initio calculations support the experimental magnetic results and show that apparently small structural differences between 1 and 4·2H₂O introduce important changes in the dipolar interactions, from antiferromagnetic in 1 to ferromagnetic in 4·2H₂O.

Dinuclear linear fluoride single-bridged Dy^III, Ho^III, and Gd^III complexes are systematically obtained from mononuclear aquo-complexes, with the Dy^III ones showing slow relaxation of the magnetization and the Gd^III one revealing a weak AF coupling through the Gd−F−Gd bridge.

Recent developments in supramolecular complexes of azabenzenes containing one to four N atoms: synthetic strategies, structures, and magnetic properties

For the last couple of decades, azabenzene-based ligands have drawn much attention from inorganic chemists due to their ability to coordinate with different metal ions to form supramolecular clusters. These azabenzenes are weak σ donors and strong π acceptors and electron-deficient. Metallogrid complexes and non-grid oligomers are well-defined supramolecular clusters, formed by appropriate chelating ligands, and can show interesting optical, magnetic, and electronic properties. Self-assembly of [n × n] metallogrid complexes is dominated by the entropic factor while the formation of oligonuclear metal ion complexes is dominated by other effects like CFSE, electrostatic factors, ligand conformational characters, etc. Herein, the present article gives an overview of six-membered heterocyclic azine-based ligands and their potential for different metal ions to form polynuclear complexes. Moreover, their temperature-dependent magnetic properties and SCO phenomena are well described and tabulated.

Slow magnetic relaxation in dinuclear Co(III)-Co(II) complexes containing a five-coordinated Co(II) centre with easy-axis anisotropy

Two air-stable Co(III)-Co(II) mixed-valence complexes of molecular formulas [Co^IICo^III(L)(DMAP)₃(CH₃COO)]·H₂O·CH₃OH (1) and [Co^IICo^III(L)(4-Pyrrol)₃ (CH₃COO)]·0.5CH₂Cl₂ (2) (H₄L = 1,3-bis-(5-methyl pyrazole-3-carboxamide) propane; DMAP = 4-dimethylaminopyridine; and 4-Pyrrol = 4-pyrrolidinopyridine) were synthesized and characterized by single-crystal X-ray crystallography, high-field electron paramagnetic resonance (HFEPR) spectroscopy, and magnetic measurements. Both complexes possess one five-coordinated paramagnetic Co(II) ion and one six-coordinated Co(III) ion with octahedral geometry. Direct-current magnetic susceptibility and magnetization measurements show the easy-axis magnetic anisotropy that is also confirmed by low-temperature HFEPR measurements and theoretical calculations. Frequency- and temperature-dependent alternating-current magnetic susceptibility measurements reveal their field-assisted slow magnetic relaxation, which is a characteristic behavior of single-molecule magnets (SMMs), caused by the individual Co(II) ion. The effective energy barrier of complex 1 (49.2 cm^-1) is significantly higher than those of the other dinuclear Co(III)-Co(II) SMMs. This work hence presents the first instance of the dinuclear Co(III)-Co(II) single-molecule magnets with a five-coordinated environment around the Co(II) ion.

The coexistence of long τQTM and high Ueff as a concise criterion for a good single-molecule magnet: a theoretical case study of square antiprism dysprosium single-ion magnets

A systematic theoretical study is performed on a group of 16 square antiprism dysprosium single-ion magnets. Based on ab initio calculations, the quantum tunneling of magnetization (QTM) time, i.e., τ_QTM, and effective barrier of magnetic reversal, U_eff, are theoretically predicted. The theoretical τ_QTM is able to identify the ones with the longest QTM time with small numerical deviations. Similar results occur with respect to U_eff too. The systems possessing the best single-molecule magnet (SMM) properties here are just the ones having both the longest τ_QTM and the highest U_eff, from either experiment or theory. Thus, our results suggest the coexistence of long τ_QTM and high U_eff to be a criterion for high-performance SMMs. Although having its own limits, this criterion is easy to be applied in a large number of systems since both τ_QTM and U_eff could be predicted by theory with satisfactory efficiency and reliability. Therefore, this concise criterion could provide screened candidates for high-performance SMMs quickly and, hence, ease the burden of further exploration aiming for a higher degree of precision. This screening is important since the further exploration could easily demand tens or even hundreds of ab initio calculations for a single SMM. A semi-quantitative crystal field (CF) analysis is performed and shown here to be capable of indicating the general trends in a more chemically intuitive way. This analysis could help to identify the most important coordinating atoms for both diagonal and non-diagonal CF components. Thus, it could give some direct clues for improving the SMM properties: reducing the distance of the axial atom to the central ion, rotating the axial atom closer to the easy axis or increasing the amount of its negative charge. Correspondingly, opposite operations on the equatorial atom could give the same result.

Effect of an axial coordination environment on quantum tunnelling of magnetization for dysprosium single-ion magnets with theoretical insight

Herein, we report two mononuclear dysprosium complexes [Dy(H₄L){B(OMe)₂(Ph)₂}₂](Cl)·MeOH (1) and [Dy(H₄L){MeOH)₂(NCS)₂}](Cl) (2) [where H₄L = 2,2'-(pyridine-2,6-diylbis(ethan-1-yl-1-ylidene))bis(N-phenylhydrazinecarboxamide)] with different axial coordination environments. The structural analysis revealed that the pentadentate H₄L ligand binds through the equatorial position in both complexes. In complex 1, the axial positions are occupied by bidentate dimethoxydiphenyleborate [B(OMe)₂(Ph)₂]^-. On the other hand, in complex 2, one axial position is occupied by two NCS^- and one MeOH molecule while another MeOH molecule is coordinated to the other axial position. Magnetic measurements disclose the presence of field-induced slow relaxation of magnetization with an energy barrier of U_eff = 30 K for 1 whereas no such effective barrier was observed in complex 2. Detailed analysis of field and temperature dependence of the relaxation time confirms the major role of Raman, QTM, and direct processes rather than the Orbach process in complex 1. It was observed that [B(OMe)₂(Ph)₂]^- provides higher axial anisotropy which slows down the QTM process (relaxation time for the QTM process is 2.70 × 10^-5 s) in 1 as compared to NCS anions and MeOH molecules in 2 (1.03 × 10^-8 s), and is responsible for the absence of an effective energy barrier in the latter complex as confirmed by ab initio calculations. The calculations also show that the presence of a large bidentate dimethoxydiphenyleborate ligand in axial positions may result in high-performance Dy-based single-ion magnets.

Pseudo-mono-axial ligand fields that support high energy barriers in triangular dodecahedral Dy(iii) single-ion magnets

Air-stable triangular dodecahedral Dy(iii) single-ion magnets with pseudo-mono-axial linear ligand fields exhibit high energy barrier exceeding 600 K, which represent the highest energy barrier for mononuclear SMMs with triangular dodecahedron.

The interpretation and prediction of lanthanide single-ion magnet from ab initio electronic structure calculation: The capability and limit

Single-molecule magnet (SMM) is a fascinating system holding the potential of being revolutionary micro-electronic device in information technology. However current SMMs are still far away from real-life application due to...