Magnetic materials: a journey from finding north to an exciting printed future

Bioprinting of Cells, Organoids and Organs-on-a-Chip Together with Hydrogels Improves Structural and Mechanical Cues

The 3D bioprinting technique has made enormous progress in tissue engineering, regenerative medicine and research into diseases such as cancer. Apart from individual cells, a collection of cells, such as organoids, can be printed in combination with various hydrogels. It can be hypothesized that 3D bioprinting will even become a promising tool for mechanobiological analyses of cells, organoids and their matrix environments in highly defined and precisely structured 3D environments, in which the mechanical properties of the cell environment can be individually adjusted. Mechanical obstacles or bead markers can be integrated into bioprinted samples to analyze mechanical deformations and forces within these bioprinted constructs, such as 3D organoids, and to perform biophysical analysis in complex 3D systems, which are still not standard techniques. The review highlights the advances of 3D and 4D printing technologies in integrating mechanobiological cues so that the next step will be a detailed analysis of key future biophysical research directions in organoid generation for the development of disease model systems, tissue regeneration and drug testing from a biophysical perspective. Finally, the review highlights the combination of bioprinted hydrogels, such as pure natural or synthetic hydrogels and mixtures, with organoids, organoid-cell co-cultures, organ-on-a-chip systems and organoid-organ-on-a chip combinations and introduces the use of assembloids to determine the mutual interactions of different cell types and cell-matrix interferences in specific biological and mechanical environments.

Self-sensing magnetic actuator based on sustainable collagen hybrid nanocomposites

Taking into account that natural polymers are renewable and biodegradable, hybrid materials based on natural polymers are required for advanced technological applications with reduced environmental footprint. In this work, sustainable composites have been developed based on collagen as a polymeric matrix and different magnetic fillers, in order to tailor magnetic response. The composites were prepared by solution casting with 30 wt% of magnetite nanoparticles (Fe3O4 NPs), magnetite nanorods (Fe3O4 NRs) or cobalt ferrite nanoparticles (CoFe2O4 NPs). It is shown that the magnetic filler type has no bearing on the morphology, physical-chemical, or thermal characteristics of the composites, whereas the mechanical properties are determined by the magnetic filler, leading to a reduction in tensile strength, with values of 4.95 MPa for Fe3O4 NPs, 9.20 MPa for Fe3O4 NRs and 5.21 MPa for CoFe2O4 NPs containing samples. However, the highest magnetization saturation is obtained for Fe3O4 NPs (44 emu.g-1) and the higher coercive field for CoFe2O4 NPs (2062 Oe). In order to prove functionality of the developed composites, a self-sensing magnetic actuator device has been developed with the composite film with CoFe2O4 NPs, showing high stability over cycling.

Effect of Polydispersity on the Structural and Magnetic Properties of a Magnetopolymer Composite

When using magnetopolymer composites in high-precision industrial and biomedical technologies, the problem of predicting their properties in an external magnetic field arises. In this work, we study theoretically the influence of the polydispersity of a magnetic filler on a composite's equilibrium magnetization and on the orientational texturing of magnetic particles formed during polymerization. The results are obtained using rigorous methods of statistical mechanics and Monte Carlo computer simulations in the framework the bidisperse approximation. It is shown that by adjusting the dispersione composition of the magnetic filler and the intensity of the magnetic field at which the sample's polymerization occurs, it is possible to control the composite's structure and magnetization. The derived analytical expressions determine these regularities. The developed theory takes into account dipole-dipole interparticle interactions and therefore can be applied to predict the properties of concentrated composites. The obtained results are a theoretical basis for the synthesis of magnetopolymer composites with a predetermined structure and magnetic properties.

Digital light processing 3D printing of dynamic magneto-responsive thiol-acrylate composites

Additive manufacturing is one of the most promising processing techniques for fabricating customized 3D objects. For the 3D printing of functional and stimuli-triggered devices, interest is steadily growing in processing materials with magnetic properties. Synthesis routes for magneto-responsive soft materials typically involve the dispersion of (nano)particles into a non-magnetic polymer matrix. Above their glass transition temperature, the shape of such composites can be conveniently adjusted by applying an external magnetic field. With their rapid response time, facile controllability, and reversible actuation, magnetically responsive soft materials can be used in the biomedical field (e.g. drug delivery, minimally invasive surgery), soft robotics or in electronic applications. Herein, we combine the magnetic response with thermo-activated healability by introducing magnetic Fe₃O₄ nanoparticles into a dynamic photopolymer network, which undergoes thermo-activated bond exchange reactions. The resin is based on a radically curable thiol-acrylate system, whose composition is optimized towards processability via digital light processing 3D printing. A mono-functional methacrylate phosphate is applied as a stabilizer to increase the resins' shelf life by preventing thiol-Michael reactions. Once photocured, the organic phosphate further acts as a transesterification catalyst and activates bond exchange reactions at elevated temperature, which render the magneto-active composites mendable and malleable. The healing performance is demonstrated by recovering magnetic and mechanical properties after the thermally triggered mending of 3D-printed structures. We further demonstrate the magnetically driven movement of 3D-printed samples, which gives rise to the potential use of these materials in healable soft devices activated by external magnetic fields.

Magnetic Bacterial Cellulose Biopolymers: Production and Potential Applications in the Electronics Sector

Bacterial cellulose (BC) is a biopolymer that has been widely investigated due to its useful characteristics, such as nanometric structure, simple production and biocompatibility, enabling the creation of novel materials made from additive BC in situ and/or ex situ. The literature also describes the magnetization of BC biopolymers by the addition of particles such as magnetite and ferrites. The processing of BC with these materials can be performed in different ways to adapt to the availability of materials and the objectives of a given application. There is considerable interest in the electronics field for novel materials and devices as well as non-polluting, sustainable solutions. This sector influences the development of others, including the production and optimization of new equipment, medical devices, sensors, transformers and motors. Thus, magnetic BC has considerable potential in applied research, such as the production of materials for biotechnological electronic devices. Magnetic BC also enables a reduction in the use of polluting materials commonly found in electronic devices. This review article highlights the production of this biomaterial and its applications in the field of electronics.

Acrylonitrile Butadiene Styrene-Based Composites with Permalloy with Tailored Magnetic Response

This work reports on tailoring the magnetic properties of acrylonitrile butadiene styrene (ABS)-based composites for their application in magnetoactive systems, such as magnetic sensors and actuators. The magnetic properties of the composites are provided by the inclusion of varying permalloy (Py-Ni₇₅Fe₂₀Mo₅) nanoparticle content within the ABS matrix. Composites with Py nanoparticle content up to 80 wt% were prepared and their morphological, mechanical, thermal, dielectric and magnetic properties were evaluated. It was found that ABS shows the capability to include high loads of the filler without negatively influencing its thermal and mechanical properties. In fact, the thermal properties of the ABS matrix are basically unaltered with the inclusion of the Py nanoparticles, with the glass transition temperatures of pristine ABS and its composites remaining around 105 °C. The mechanical properties of the composites depend on filler content, with the Young's modulus ranging from 1.16 GPa for the pristine ABS up to 1.98 GPa for the sample with 60 wt% filler content. Regarding the magnetic properties, the saturation magnetization of the composites increased linearly with increasing Py content up to a value of 50.9 emu/g for the samples with 80 wt% of Py content. A numerical model has been developed to support the findings about the magnetic behavior of the NP within the ABS. Overall, the slight improvement in the mechanical properties and the magnetic properties provides the ABS composites new possibilities for applications in magnetoactive systems, including magnetic sensors, actuators and magnetic field shielding.

Design, Fabrication, and Characterization of Magnetoresponsive Materials and Devices

Modern technology has made an elegant link between smart materials and interlinked devices thanks to the interplay between materials science, smart sensors and devices, artificial intelligence, and a fierce imagination; this has allowed us to reach every corner of our society [...].

Liquid Gating Meniscus-Shaped Deformable Magnetoelastic Membranes with Self-Driven Regulation of Gas/Liquid Release

Liquid gating membranes have been demonstrated to show unprecedented properties of dynamicity, stability, adaptivity, and stimulus-responsiveness. Most recently, smart liquid gating membranes have attracted increasing attention to bring some brand-new properties for real-world applications, and various environment-driven systems have been created. Here, a self-driven system of a smart liquid gating membrane is further developed by designing a new sytem based on a liquid gating magnetoelastic porous membrane with reversible meniscus-shaped deformations, and it is not subject to the complex gating liquid restriction of magnetorheological fluids. Compared with other systems, this magnetic-responsive self-driven system has the advantage that it provides a universal and convenient way to realize active regulation of gas/liquid release. Experiments and theoretical calculations demonstrate the stability, the nonfouling behavior, and the tunability of the system. In addition, this system can be used to perfectly open and close gas transport, and the gating pressure threshold for the liquid release can be reduced under the same conditions. Based on the above capabilities, combined with the fast and 3D contactless operation, it will be of benefit in fields ranging from visible gas/liquid mixture content monitoring and energy-saving multiphase separation, remote fluid release, and beyond.

Textiles in soft robots: Current progress and future trends

Soft robotics have substantial benefits of safety, adaptability, and cost efficiency compared to conventional rigid robotics. Textiles have applications in soft robotics either as an auxiliary material to reinforce the conventional soft material or as an active soft material. Textiles of various types and configurations have been fabricated into key components of soft robotics in adaptable formats. Despite significant advancements, the efficiency and characteristics of textile actuators in practical applications remain unsatisfactory. To address these issues, novel structural and material designs as well as new textile technologies have been introduced. Herein, we aim at giving an insight into the current state of the art in textile technology for soft robotic manufacturing. We firstly discuss the fundamental actuation mechanisms for soft robotics. We then provide a critical review on the recently developed functional textiles as reinforcements, sensors, and actuators in soft robotics. Finally, the future trends and current strategies that can be employed in textile-based actuator manufacturing process have been explored to address the critical challenges in soft robotics.

3D/4D Printing of Polymers: Fused Deposition Modelling (FDM), Selective Laser Sintering (SLS), and Stereolithography (SLA)

Additive manufacturing (AM) or 3D printing is a digital manufacturing process and offers virtually limitless opportunities to develop structures/objects by tailoring material composition, processing conditions, and geometry technically at every point in an object. In this review, we present three different early adopted, however, widely used, polymer-based 3D printing processes; fused deposition modelling (FDM), selective laser sintering (SLS), and stereolithography (SLA) to create polymeric parts. The main aim of this review is to offer a comparative overview by correlating polymer material-process-properties for three different 3D printing techniques. Moreover, the advanced material-process requirements towards 4D printing via these print methods taking an example of magneto-active polymers is covered. Overall, this review highlights different aspects of these printing methods and serves as a guide to select a suitable print material and 3D print technique for the targeted polymeric material-based applications and also discusses the implementation practices towards 4D printing of polymer-based systems with a current state-of-the-art approach.