Two-dimensional layered double hydroxide nanoadjuvant: recent progress and future direction

Layered Double Hydroxides (LDH) as Delivery Vehicles of a Chimeric Protein Carrying Epitopes from the Porcine Reproductive and Respiratory Syndrome Virus

The Porcine Reproductive and Respiratory Syndrome Virus (PRRSV) causes reproductive failure and respiratory symptoms, leading to huge economic losses for the pig farming industry. Although several vaccines against PRRSV are available in the market; they show an overall low efficacy, and several countries have the need for vaccines covering the local, circulating variants. This project aims at developing a new chimeric antigen targeting specific epitopes from PRRSV and evaluating two test adjuvants to formulate a vaccine candidate. The test antigen was called LTB-PRRSV, which was produced recombinantly in Escherichia coli and consisted of the heat labile enterotoxin B subunit from E. coli (LTB) and four epitopes from PRRSV. LTB-PRRSV was rescued as inclusion bodies and methods for its solubilization, IMAC-based purification, and refolding were standardized, leading to mean yields of 18 mg of pure protein per liter culture. Layered double hydroxides (LDH) have been used as vaccine adjuvants given their biocompatibility, low cost, and positive surface charge that allows an efficient adsorption of negatively charged biomolecules. Therefore, LDH were selected as delivery vehicles of LTB-PRRSV. Pure LTB-PRRSV was adsorbed onto LDH by incubation at different LDH:LTB-PRRSV mass ratios (1:0.25, 1:0.5, 1:1, and 1:2) and at pH 9.5. The best adsorption occurred with a 1:2 mass ratio, and in a sucrose-tween solution. The conjugates obtained had a polydispersity index of 0.26, a hydrodynamic diameter of 192 nm, and a final antigen concentration of 64.2 μg/mL. An immunogenicity assessment was performed by injecting mice with LDH:LTB-PRRSV, Alum/LTB-PRRSV, or LTB-PRRSV in a scheme comprising three immunizations at two-week intervals and two dose levels (1 and 5 μg). LTB-PRRSV was capable of inducing strong humoral responses, which lasted for a longer period when LDH was used as the delivery vehicle/adjuvant. The potential of LDH to serve as an attractive carrier for veterinary vaccines is discussed.

Recent progress in lactate oxidase-based drug delivery systems for enhanced cancer therapy

Lactate oxidase (LOX) is a natural enzyme that efficiently consumes lactate. In the presence of oxygen, LOX can catalyse the formation of pyruvate and hydrogen peroxide (H2O2) from lactate. This process led to acidity alleviation, hypoxia, and a further increase in oxidative stress, alleviating the immunosuppressive state of the tumour microenvironment (TME). However, the high cost of LOX preparation and purification, poor stability, and systemic toxicity limited its application in tumour therapy. Therefore, the rational application of drug delivery systems can protect LOX from the organism's environment and maintain its catalytic activity. This paper reviews various LOX-based drug-carrying systems, including inorganic nanocarriers, organic nanocarriers, and inorganic-organic hybrid nanocarriers, as well as other non-nanocarriers, which have been used for tumour therapy in recent years. In addition, this area's challenges and potential for the future are highlighted.

A Cancer Nanovaccine Based on an FeAl-Layered Double Hydroxide Framework for Reactive Oxygen Species-Augmented Metalloimmunotherapy

The complexity and heterogeneity of individual tumors have hindered the efficacy of existing therapeutic cancer vaccines, sparking intensive interest in the development of more effective in situ vaccines. Herein, we introduce a cancer nanovaccine for reactive oxygen species-augmented metalloimmunotherapy in which FeAl-layered double hydroxide (LDH) is used as a delivery vehicle with dihydroartemisinin (DHA) as cargo. The LDH framework is acid-labile and can be degraded in the tumor microenvironment, releasing iron ions, aluminum ions, and DHA. The iron ions contribute to aggravated intratumoral oxidative stress injury by the synergistic Fenton reaction and DHA activation, causing apoptosis, ferroptosis, and immunogenic cell death in cancer cells. The subsequently released tumor-associated antigens with the aluminum adjuvant form a cancer nanovaccine to generate robust and long-term immune responses against cancer recurrence and metastasis. Moreover, Fe ion-enabled T1-weighted magnetic resonance imaging can facilitate real-time tumor therapy monitoring. This cancer-nanovaccine-mediated metalloimmunotherapy strategy has the potential for revolutionizing the precision immunotherapy landscape.

Layered Double Hydroxides as the Unique Product of Target Ionic Construction for Energy, Chemical, Foods, Cosmetics, Medicine and Ecology Applications

Layered Double Hydroxide (LDH) is an α-modification of the M-host (M2+ ) hydroxide, in which some part of the M-host cations is replaced by M-guest cations (M3+ or M4+ ). The emerging excess positive charge is compensated by the intercalation of anions into the interlayer space, which also contains water molecules. LDHs exhibit anion exchange properties. Targeted ionic design of LDHs via combining three components (M-host, M-guest cations, intercalated anions) allows the creation of a very wide range of highly efficient electrochemical, electrocatalytic, electrochromic substances, catalysts, ion exchangers, sorbents, color pigments, pharmacological drugs, food, and cosmetic additives. In this review, the structure and areas of application of LDHs are considered from the perspective of the targeted ionic design of a substance for a specific application.

Reduction of intracellular oxidative stress with a copper-incorporated layered double hydroxide

Biocompatible Cu(II)-doped layered double hydroxide (CMA) nanoparticles were developed to combat reactive oxygen species. The 2-dimensional nanozymes showed both superoxide dismutase- and catalase-like activities in chemical assays, while proving as efficient antioxidants in the reduction of intracellular oxidative stress. The results indicate the great promise of CMA in antioxidant therapies.

Tumor microenvironment-activated, immunomodulatory nanosheets loaded with copper(II) and 5-FU for synergistic chemodynamic therapy and chemotherapy

The tumor microenvironment (TME) has a redox state that differs greatly from normal tissues, as characterized by the overexpression of H2O2 and glutathione (GSH). To address the GSH-related restrictions on chemodynamic therapy (CDT) efficacy, we have developed a Cu(II)-based CDT strategy. In this study, a novel organic-inorganic hybrid drug delivery system (LDH/HA/5-FU) was conceived and prepared by the intercalation of 5-FU into the interlayer of copper-aluminum layered double hydroxide (CuAl-LDH) via ion exchange strategy and the adsorption of hyaluronic acid (HA) on the surface of CuAl-LDH. Taking advantage of the pH-degradable property of CuAl-LDH and the CD44-targeting property of HA, the formed LDH/HA/5-FU nanosheets could specifically target tumor cells' overexpressing CD44 receptor, rapidly release Cu(II) and 5-FU in tumor cells, inducing tumor cell apoptosis and cuproptosis, and long-term intracellular GSH depletion and toxic hydroxyl radicals (·OH) generation could be achieved through the cyclic catalytic reaction of Cu(I)/Cu(II). Meanwhile, peritumoral injection of LDH/HA/5-FU nanosheets might function as an adjuvant to increase the levels of antitumor tumor-associated macrophages (TAMs) and T cells. In vivo experiments further verified that the intelligently designed LDH/HA/5-FU nanosheets successfully promoted the immune systems, with an excellent inhibition efficacy towards tumors by combining Cu-based CDT and chemotherapy, showing promising potential for solid tumor treatments.

Layered double hydroxides and their tailored hybrids/composites: Progressive trends for delivery of natural/synthetic-drug/cosmetic biomolecules

Layered double hydroxides (LDHs) are well-known and important class of hydrotalcite-type anionic clays (HTs) materials that are cost-effective with additional advantages of facile synthesis, composition, tenability, and reusability. These convincing characteristics are liable for their applications in various fields related to energy, environment, catalysis, biomedical, and biotechnology. HTs/LDHs are generally synthesized from low cost abundantly available chemical precursors through the aqueous synthetic pathways under mild reaction conditions. These materials can be termed green materials based on their non-toxic nature, availability of precursors, facile and low-cost production using aqueous medium conditions with less hazardous effluents. Diverse and fascinating characteristics have been attributed to HTs/LDHs like anion exchange ability, surface basicity, biocompatibility, controlled release of the anion specific area, porosity, easy surface modification, and pH dependent biodegradability. Hence, HTs/LDHs and their modified and/or functionalized nanohybrids/nanocomposites are reported as the potential drug delivery carriers with a capability to stabilize the susceptible bioactive molecules, may enhance the solubility of poorly soluble drugs along with controlled drug/bioactive molecule release and delivery. These clay and bioactive hybrid materials have good biocompatibility, less cytotoxicity, and better site-targeting with improved cellular uptake than that of free parent biomolecules. These lamellar solids of micro/nanostructure are compatible, host-guest materials and able to fabricate with drugs/cosmeceutical/bio- or synthetic polymers without any change in their molecular structure and reactivity along with improvement in their stabilities. Other important features are facile synthesis, basicity, high stability with easy storage, and efficient administration with low bio-toxicity. This study enlightens the applications of HTs/LDHs along with their hybrids/composites in the field of drug/cosmeceutical/gene delivery systems of natural/synthetic biomolecules.

A Booster for Radiofrequency Ablation: Advanced Adjuvant Therapy via In Situ Nanovaccine Synergized with Anti-programmed Death Ligand 1 Immunotherapy for Systemically Constraining Hepatocellular Carcinoma

Radiofrequency ablation (RFA) is one of the most common minimally invasive techniques for treating hepatocellular carcinoma (HCC), which could destroy tumors through hyperthermia and generate massive tumor-associated antigens (TAAs). However, residual malignant tissues or small satellite lesions are hard to eliminate, generally resulting in metastases and recurrence. Herein, an advanced in situ nanovaccine formed by layered double hydroxides carrying cGAMP (STING agonist) (LDHs-cGAMP) and adsorbed TAAs was designed to potentiate the RFA-induced antitumor immune response. As-prepared LDHs-cGAMP could effectively enter cancerous or immune cells, inducing a stronger type I interferon (IFN-I) response. After further adsorption of TAAs, nanovaccine generated sustained immune stimulation and efficiently promoted activation of dendritic cells (DCs). Notably, infiltrations of cytotoxic lymphocytes (CTLs) and activated DCs in tumor and lymph nodes were significantly enhanced after nanovaccine treatment, which distinctly inhibited primary, distant, and metastasis of liver cancer. Furthermore, such a nanovaccine strategy greatly changed the tumor immune microenvironment and promoted the response efficiency of anti-programmed death ligand 1 (αPD-L1) immunotherapy, significantly arresting the poorly immunogenic hepa1-6 liver cancer progression. These findings demonstrate the potential of nanovaccine as a booster for RFA in liver cancer therapy and provide a promising in situ cancer vaccination strategy.

Molecular Antioxidants Maintain Synergistic Radical Scavenging Activity upon Co-Immobilization on Clay Nanoplatelets

Unbalanced levels of reactive oxygen species (ROS) result in oxidative stress, affecting both biomedical and industrial processes. Antioxidants can prevent ROS overproduction and thus delay or inhibit their harmful effects. Herein, activities of two molecular antioxidants (gallic acid (GA), a well-known phenolic compound, and nicotinamide adenine dinucleotide (NADH), a vital biological cofactor) were tested individually and in combination to assess possible synergistic, additive, or antagonistic effects in free radical scavenging and in redox capacity assays. GA was a remarkable radical scavenger, and NADH exhibited moderate antioxidant activity, while their combination at different molar ratios led to a synergistic effect since the resulting activity was superior to the sum of the individual GA and NADH activities. Their coimmobilization was performed on the surface of delaminated layered double hydroxide clay nanoplatelets by electrostatic interactions, and the synergistic effect was maintained upon such a heterogenization of these molecular antioxidants. The coimmobilization of GA and NADH expands the range of their potential applications, in which separation of antioxidant additives is important during treatments or manufacturing processes.

Regulating the surface topography of CpG nanoadjuvants via coordination-driven self-assembly for enhanced tumor immunotherapy

Immunoadjuvants play a key role in enhancing the efficacy of therapeutic tumor vaccines for treating malignant and recurrent cancers. However, due to the bottleneck in the rational design and mechanistic understanding of novel adjuvants, currently available immunoadjuvants in clinical practice are very limited. To boost adjuvant design and development, herein we propose a surface topography regulatory strategy for constructing novel adjuvants with improved adjuvant properties. One of the licensed adjuvants with a well-defined molecular mechanism of immune activation, cytosine-phosphate-guanine oligodeoxynucleotides (CpG ODNs), was used as the material framework. We constructed immunostimulatory CpG nanoparticles (CpG NPs) with different surface topographies by coordination-driven self-assembly between CpG ODNs and ferrous ions. These self-assembled CpG NPs combine the biological and physical activation abilities of innate immunity and can be used as adjuvants of tumor antigens for malignant tumor immunotherapy. The experimental results showed that these CpG NPs could rapidly enter innate immune cells and remold the tumor microenvironment (TME) to enhance anti-tumor immunotherapy via (i) inducing proinflammatory cytokine production; (ii) promoting the transformation of macrophages from immunosuppressed M2 types into immunoactivated M1 types; (iii) amplifying the antigen presentation of mature dendritic cells (DCs), and (iv) activating T cells in tumor sites. Among the prepared nanostructures, pompon-shaped nanoparticles (NPpo) showed the strongest adjuvant properties and anti-tumor immunotherapeutic effect as the adjuvant of ovalbumin in melanoma-bearing mice. Overall, this work provides an effective strategy for designing novel adjuvants for activating the immunosuppressed TME to enable better cancer immunotherapy.

Layered Double Hydroxides: A Novel Promising 2D Nanomaterial for Bone Diseases Treatment

Bone diseases including bone defects, bone infections, osteoarthritis, and bone tumors seriously affect life quality of the patient and bring serious economic burdens to social health management, for which the current clinical treatments bear dissatisfactory therapeutic effects. Biomaterial-based strategies have been widely applied in the treatment of orthopedic diseases but are still plagued by deficient bioreactivity. With the development of nanotechnology, layered double hydroxides (LDHs) with adjustable metal ion composition and alterable interlayer structure possessing charming physicochemical characteristics, versatile bioactive properties, and excellent drug loading and delivery capabilities arise widespread attention and have achieved considerable achievements for bone disease treatment in the last decade. However, to the authors' best knowledge, no review has comprehensively summarized the advances of LDHs in treating bone disease so far. Herein, the advantages of LDHs for orthopedic disorders treatment are outlined and the corresponding state-of-the-art achievements are summarized for the first time. The potential of LDHs-based nanocomposites for extended therapeutics for bone diseases is highlighted and perspectives for LDHs-based scaffold design are proposed for facilitated clinical translation.

"Trojan horse" nanoparticle-delivered cancer cell membrane vaccines to enhance cancer immunotherapy by overcoming immune-escape

Cancer cell membranes (CCMs) have emerged as advanced cancer treatment vaccines to boost the immune response against cancer and have shown great potential in cancer immunotherapy. However, the CCM vaccine confronts the challenges of a weak and short immune response, ascribed to the immune escape and low accumulation of the CCM in antigen presentation cells (APCs). To overcome these shortcomings, we devised a "Trojan horse" CCM nano-vaccine delivered by layered double hydroxide (LDH) nanoparticles with mannose targeting and bovine serum albumin (BSA) coating to overcome the immune escape challenge, efficiently boosting the immune response to cancer cells. This "Trojan horse" CCM nano-vaccine, named LGCMB, is constructed by assembling the CCM antigen on CpG-LDH (LG), followed by mannose-BSA coating for the APC target and BSA coating to mask immune-escape protein on the CCM. The in vitro cellular uptake and maturation data have clearly shown that the BSA coating strategy with mannose as a "Trojan horse" efficiently targeted APCs (macrophages and DCs) and effectively inhibited the immune escape of the CCM, competently stimulating the APC maturation. Moreover, LGCMB can migrate to the draining lymph nodes (LNs) and trigger tumor-specific CD8⁺ T cell responses in vivo. As expected, the LGCMB nano-vaccine significantly suppressed tumor growth in vivo, showing great potential as a precision cancer vaccine.

State-of-the-art advancement of surface functionalized layered double hydroxides for cell-specific targeting of therapeutics

Over the years, layered double hydroxides (LDHs) hold a specific position in biomedicine due to their tunable chemical composition and appropriate structural properties. However, LDHs lack adequate sensitivity for active targeting because of less active surface area and low mechanical strength in physiological conditions. The exploitation of eco-friendly materials, such as chitosan (CS), for surface engineering of LDHs, whose payloads are transferred only under certain conditions, can help develop stimuli-responsive materials owing to high biosafety and unique mechanical strength. We aim to render a well-oriented scenario toward the latest achievements of a bottom-up technology relying on the surface functionalization of LDHs to fabricate functional formulations with promoted bio-functionality and high encapsulation efficiency for various bioactives. Many efforts have been devoted to critical aspects of LDHs, including systemic biosafety and the suitability for developing multicomponent systems via integration with therapeutic modalities, which are thoroughly discussed herein. In addition, a comprehensive discussion was provided for the recent progress in the emergence of CS-coated LDHs. Finally, the challenges and future perspectives in the fabrication of efficient CS-LDHs in biomedicine are considered, with a special focus on cancer treatment.

Confinement of Triple-Enzyme-Involved Antioxidant Cascade in Two-Dimensional Nanostructure

Application of antioxidant enzymes in medical or industrial processes is limited due to their high sensitivity to environmental conditions. Incorporation of such enzymes in nanostructures provides a promising route to obtain highly efficient and robust biocatalytic system to scavenge reactive oxygen species (ROS). Here, this question was addressed by confinement of superoxide dismutase (SOD), horseradish peroxidase (HRP), and catalase (CAT) enzymes into nanostructures containing polyelectrolyte building blocks (alginate (Alg) and trimethyl chitosan (TMC)) and delaminated layered double hydroxide (dLDH) nanoparticle support. The nanocomposite possessed excellent structural and colloidal stability, while antioxidant tests revealed that the enzymes remained active upon immobilization and the developed composite greatly reduced intracellular oxidative stress in two-dimensional cell cultures. Moreover, it effectively prevented hydrogen peroxide-induced double stranded DNA breaks, which is a common consequence of oxidative stress. The results provide important tools to design complex nanostructures with multienzymatic antioxidant activities for ROS scavenging.

Rational Design of a Triple Tumor Microenvironment-Responsive Nanoplatform for Enhanced Tumor Theranostics

The development of responsive nanoplatforms based on the tumor microenvironment (TME) is critical for tumor diagnosis and treatment. Concentrating on a single TME-responsive nanoplatform, however, may result in insufficient diagnostic accuracy and treatment efficacy. Herein, layered double-hydroxides (LDHs) and rare earth nanomaterials (Er@Lu) were combined to create a triple TME-responsive nanoplatform that was then modified with cypate (a fluorescent dye with strong absorbance) by a peptide chain and loaded with epigallocatechin gallate (EGCG), a chemotherapeutic drug. Multiple responses to TME occurred when Er@Lu/LDH-EGCG reached the colorectal tumor region. Based on an acidic TME, the nanoplatform cracked and released Ni²⁺ and EGCG. NiS, which was produced by the reaction of Ni²⁺ with abundant H₂ S in tumor cells, was used for photothermal therapy and the released EGCG was used for chemotherapy. The MMP-7 enzyme specifically expressed in tumor cells recognized and cut the peptide chain, resulting in cypate release. The fluorescence of the Er@Lu was then restored along with the release of cypate because of the absorption competition disappearance. Compared to a single TME response, Er@Lu/LDH-EGCG with a triple TME response led to a better synergistic therapeutic effect in vitro and in vivo. This work has provided new approaches for developing multiple TME-responsive therapeutic nanoplatforms for synergistic therapy with improved diagnosis and therapeutic efficiency.

Targeting inorganic nanoparticles to tumors using biological membrane-coated technology

Inorganic nanoparticles have extensively revolutionized the effectiveness of cancer therapeutics due to their distinct physicochemical properties. However, the therapeutic efficiency of inorganic nanoparticles is greatly hampered by the complex tumor microenvironment, patient heterogeneity, and systemic nonspecific toxicity. The biomimetic technology based on biological membranes (cell- or bacteria-derived membranes) is a promising strategy to confer unique characteristics to inorganic nanoparticles, such as superior biocompatibility, prolonged circulation time, immunogenicity, homologous tumor targeting, and flexible engineering approaches on the surface, resulting in the enhanced therapeutic efficacy of inorganic nanoparticles against cancer. Therefore, a greater push toward developing biomimetic-based nanotechnology could increase the specificity and potency of inorganic nanoparticles for effective cancer treatment. In this review, we summarize the recent advances in biological membrane-coated inorganic nanoparticles in cancer precise therapy and highlight the different types of engineered approaches, applications, mechanisms, and future perspectives. The surface engineering of biological membrane can greatly enhance their targeting, intelligence, and functionality, thereby realizing stronger tumor therapy effects. Further advances in materials science, biomedicine, and oncology can facilitate the clinical translation of biological membrane-coated inorganic nanoparticles.

Surface modification of two-dimensional layered double hydroxide nanoparticles with biopolymers for biomedical applications

Layered double hydroxides (LDHs) are appealing nanomaterials for (bio)medical applications and their potential is threefold. One can gain advantage of the structure of LDH frame (i.e., layered morphology), anion exchanging property towards drugs with acidic character and tendency for facile surface modification with biopolymers. This review focuses on the third aspect, as it is necessary to evaluate the advantages of polymer adsorption on LDH surfaces. Beside the short discussion on fundamental and structural features of LDHs, LDH-biopolymer interactions will be classified in terms of the effect on the colloidal stability of the dispersions. Thereafter, an overview on the biocompatibility and biomedical applications of LDH-biopolymer composite materials will be given. Finally, the advances made in the field will be summarized and future research directions will be suggested.

BioClay™ prolongs RNA interference-mediated crop protection against Botrytis cinerea

One of the most promising tools for the control of fungal plant diseases is spray-induced gene silencing (SIGS). In SIGS, small interfering RNA (siRNA) or double-stranded RNA (dsRNA) targeting essential or virulence-related pathogen genes are exogenously applied to plants and postharvest products to trigger RNA interference (RNAi) of the targeted genes, inhibiting fungal growth and disease. However, SIGS is limited by the unstable nature of RNA under environmental conditions. The use of layered double hydroxide or clay particles as carriers to deliver biologically active dsRNA, a formulation termed BioClay™, can enhance RNA durability on plants, prolonging its activity against pathogens. Here, we demonstrate that dsRNA delivered as BioClay can prolong protection against Botrytis cinerea, a major plant fungal pathogen, on tomato leaves and fruit and on mature chickpea plants. BioClay increased the protection window from 1 to 3 weeks on tomato leaves and from 5 to 10 days on tomato fruits, when compared with naked dsRNA. In flowering chickpea plants, BioClay provided prolonged protection for up to 4 weeks, covering the critical period of poding, whereas naked dsRNA provided limited protection. This research represents a major step forward for the adoption of SIGS as an eco-friendly alternative to traditional fungicides.

Nanovector-mediated exogenous delivery of dsRNA induces silencing of target genes in very young tomato flower buds

RNA interference (RNAi) is a post-translational regulatory mechanism that controls gene expression in plants. This process can be artificially induced by double-stranded RNA (dsRNA) molecules with sequence homology to target mRNAs. Exogenously applied dsRNA on leaves has been shown to silence virulence genes of fungi and viruses, conferring protection to plants. Coupling dsRNA to nanoparticles has been demonstrated to prolong the silencing effect. The ability of exogenous dsRNA to silence endogenous genes in plants is currently under debate, mainly due to the difficulty in delivering dsRNA into plant tissues and organs. Our study aims to develop a method based on the exogenous application of dsRNA on tomato flowers for silencing endogenous genes controlling ovary growth. Two methods of dsRNA delivery into tomato flower buds (i.e., pedicel soaking and injection) were compared to test their efficacy in silencing the tomato Aux/IAA9 (SlIAA9) gene, which encodes for a known repressor of ovary growth. We examined the silencing effect of dsRNA alone and coupled to layered double hydroxide (LDHs) nanoparticles. We found that injection into the pedicel led to the silencing of SlIAA9 and the efficacy of the method was confirmed by choosing a different ovary growth repressor gene (SlAGAMOUS-like 6; SlAGL6). The coupling of dsRNA to LDHs increased the silencing effect in the case of SlIAA9. Silencing of the two repressors caused an increase in ovary size only when flower buds were treated with dsRNA coupled to LDHs. RNA-Seq of small RNAs showed that induction of RNAi was caused by the processing of injected dsRNA. In this work, we demonstrate for the first time that exogenous dsRNA coupled to LDHs can induce post-transcriptional gene silencing in the young tomato ovary by injection into the flower pedicel. This method represents a silencing tool for the study of the molecular changes occurring during the early stages of ovary/fruit growth as a consequence of downregulation of target genes, without the need to produce transgenic plants stably expressing RNAi constructs.

A Peritumorally Injected Immunomodulating Adjuvant Elicits Robust and Safe Metalloimmunotherapy against Solid Tumors

Clinical immunotherapy of solid tumors elicits durable responses only in a minority of patients, largely due to the highly immunosuppressive tumor microenvironment (TME). Although rational combinations of vaccine adjuvants with inflammatory cytokines or immune agonists that relieve immunosuppression represent an appealing therapeutic strategy against solid tumors, there are unavoidable nonspecific toxicities due to the pleiotropy of cytokines and undesired activation of off-target cells. Herein, a Zn²⁺ doped layered double hydroxide (Zn-LDH) based immunomodulating adjuvant, which not only relieves immunosuppression but also elicits robust antitumor immunity, is reported. Peritumorally injected Zn-LDH sustainably neutralizes acidic TME and releases abundant Zn²⁺ , promoting a pro-inflammatory network composed of M1-tumor-associated macrophages, cytotoxic T cells, and natural-killer cells. Moreover, the Zn-LDH internalized by tumor cells effectively disrupts endo-/lysosomes to block autophagy and induces mitochondrial damage, and the released Zn²⁺ activates the cGas-STING signaling pathway to induce immunogenic cell death, which further promotes the release of tumor-associated antigens to induce antigen-specific cytotoxic T lymphocytes. Unprecedentedly, merely injection of Zn-LDH adjuvant, without using any cytotoxic inflammatory cytokines or immune agonists, significantly inhibits the growth, recurrence, and metastasis of solid tumors in mice. This study provides a rational bottom-up design of potent adjuvant for cancer metalloimmunotherapy against solid tumors.

Efficient Immunotherapy of Drug-Free Layered Double Hydroxide Nanoparticles via Neutralizing Excess Acid and Blocking Tumor Cell Autophagy

Cancer immunotherapy efficacy is largely limited by the suppressive tumor immune microenvironment (TIME) where antitumor immune cells are inhibited and tumor antigens continue to mutate or be lost. To remodel the TIME, we here applied weakly alkaline layered double hydroxide nanoparticles (LDH NPs) to neutralize the excess acid and block autophagy of tumor cells for neoadjuvant cancer immunotherapy. Peritumoral injection of LDH NPs provided a long-term and efficient acid-neutralization in the TIME, blocked the lysosome-mediated autophagy pathway in tumor cells, and increased the levels of antitumor tumor-associated macrophages and T cells. These LDH NPs captured tumor antigens released in the tumor tissues and effectively inhibited the growth of both melanoma and colon tumors in vivo. These findings indicate that LDH NPs, as an immunomodulator and adjuvant, successfully "awaken" and promote the host innate and adaptive immune systems, showing promising potential for solid tumor immunotherapy.

Layered Double Hydroxide-Based Catalytic Materials for Sustainable Processes

Layered double hydroxides (LDH) or hydrotalcites (HT), together with their corresponding mixed oxides, continue to arouse a great deal of research interest [...]

Layered double hydroxide-based nanomaterials for biomedical applications

Against the backdrop of increased public health awareness, inorganic nanomaterials have been widely explored as promising nanoagents for various kinds of biomedical applications. Layered double hydroxides (LDHs), with versatile physicochemical advantages including excellent biocompatibility, pH-sensitive biodegradability, highly tunable chemical composition and structure, and ease of composite formation with other materials, have shown great promise in biomedical applications. In this review, we comprehensively summarize the recent advances in LDH-based nanomaterials for biomedical applications. Firstly, the material categories and advantages of LDH-based nanomaterials are discussed. The preparation and surface modification of LDH-based nanomaterials, including pristine LDHs, LDH-based nanocomposites and LDH-derived nanomaterials, are then described. Thereafter, we systematically describe the great potential of LDHs in biomedical applications including drug/gene delivery, bioimaging diagnosis, cancer therapy, biosensing, tissue engineering, and anti-bacteria. Finally, on the basis of the current state of the art, we conclude with insights on the remaining challenges and future prospects in this rapidly emerging field.

Progress on two-dimensional binary oxide materials

Two-dimensional van der Waals (2D vdW) materials have attracted much attention because of their unique electronic and optical properties. Since the successful isolation of graphene in 2004, many interesting 2D materials have emerged, including elemental olefins (silicene, germanene, etc.), transition metal chalcogenides, transition metal carbides (nitrides), hexagonal boron, etc. On the other hand, 2D binary oxide materials are an important group in the 2D family owing to their high structural diversity, low cost, high stability, and strong adjustability. This review systematically summarizes the research progress on 2D binary oxide materials. We discuss their composition and structure in terms of vdW and non-vdW categories in detail, followed by a discussion of their synthesis methods. In particular, we focus on strategies to tailor the properties of 2D oxides and their emerging applications in different fields. Finally, the challenges and future developments of 2D binary oxides are provided.

Composite of Layered Double Hydroxide with Casein and Carboxymethylcellulose as a White Pigment for Food Application

Titanium dioxide (TiO₂) is commonly used in food, cosmetic, and pharmaceutical industries as a white pigment due to its extraordinary light scattering properties and high refractive index. However, as evidenced from recent reports, there are overriding concerns about the safety of nanoparticles of TiO₂. As an alternative to TiO₂, Mg-Al layered double hydroxide (LDH) and their composite containing casein and carboxymethyl cellulose (CMC) were synthesized using wet chemistry and compared with currently used materials (food grade TiO₂ (E171), rice starch, and silicon dioxide (E551)) for its potential application as a white pigment. These particles were characterized for their size and shape (Transmission Electron Microscopy), crystallographic structure (X-Ray Diffraction), agglomeration behavior and surface charge (Dynamic Light Scattering), surface chemistry (Fourier Transform Infrared Spectroscopy), transmittance (UV–VIS spectroscopy), masking power, and cytotoxicity. Our results showed the formation of typical layered double hydroxide with flower-like morphology which was restructured into pseudo-spheres after casein intercalation. Transmittance measurement showed that LDH composites had better performance than pristine LDH, and the aqueous suspension was heat and pH resistant. While its masking power was not on a par with E171, the composite of LDH was superior to current alternatives such as rice starch and E551. Sustainability score obtained by MATLAB^® based comparison for price, safety, and performance showed that LDH composite was better than any of the compared materials, highlighting its potential as a white pigment for applications in food.

Mg/Al-LDH as a nano-adjuvant for pertussis vaccine: a evaluation compared with aluminum hydroxide adjuvant

Background. Layered double hydroxide (LDH) has been demonstrated as a highly efficient antigen platform to induce effective and durable immune response. However, whether LDH nanoparticles could act as an adjuvant for pertussis vaccines is still unknown. Here we evaluated the potential of Mg/Al-LDH as a nano-adjuvant to improve immune response against pertussis and compared it with commercial aluminum hydroxide (AH) adjuvant.Method. The Mg/Al-LDH nanoparticles were synthesized by a hydrothermal reaction. The morphology, structure and size of Mg/Al-LDH were characterized by transmission electron microscope, x-ray diffraction and MALVERN particle analysis. The ovalbumin and Pertussis toxin (PTd) was adsorbed to Mg/Al-LDH. The immune response of antigen-LDH complex was evaluated in mice, compared with commercial adjuvant alum. Hematoxylin-eosin staining was used to evaluate the inflammatory response at injection site.Results. The synthetic Mg/Al-LDH nanoparticles showed a typical hexagonal lamellar structure. The average size of synthetic nanoparticles was 102.9 nm with PDI of 0.13 and zeta potential was 44.4 mV. Mg/Al-LDH nanoparticles effectively adsorbed protein antigen and mediated antigen uptake by DC cells. Animal experiments showed that Mg/Al-LDH gave enhancement in anti-pertussis toxin (PTd) humoral immune response, which was considerable to commercial AH adjuvant. Finally, Mg/Al-LDH produced a slighter inflammatory response than AH at injection site and this injury was quickly recovered.Conclusion. Our study demonstrated the potential of Mg/Al-LDH as an effective adjuvant for pertussis vaccine, which induced comparable antibody response and had a better safety compared with commercial AH adjuvant.

Research progress on photocatalytic reduction of CO2 based on LDH materials

Converting CO₂ to renewable fuels or valuable carbon compounds is an effective way to solve the global warming and energy crisis. Compared with other CO₂ conversion methods, photocatalytic reduction of CO₂ is more energy-saving, environmentally friendly, and has a broader application prospect. Layered double hydroxide (LDH) has attracted widespread attention as a two-dimensional material, composed of metal hydroxide layers, interlayer anions and water molecules. This review briefly introduces the basic theory of photocatalysis and the mechanism of CO₂ reduction. The composition and properties of LDH are introduced. The research progress on LDH in the field of photocatalytic reduction of CO₂ is elaborated from six aspects: directly as a catalyst, as a precursor for a catalyst, and by modification, intercalation, supporting with other materials and construction of a heterojunction. Finally, the development prospects of LDH are put forward. This review could provide an effective reference for the development of more efficient and reasonable photocatalysts based on LDH.

Computational Indicator Approach for Assessment of Nanotoxicity of Two-Dimensional Nanomaterials

The increasing growth in the development of various novel nanomaterials and their biomedical applications has drawn increasing attention to their biological safety and potential health impact. The most commonly used methods for nanomaterial toxicity assessment are based on laboratory experiments. In recent years, with the aid of computer modeling and data science, several in silico methods for the cytotoxicity prediction of nanomaterials have been developed. An affordable, cost-effective numerical modeling approach thus can reduce the need for in vitro and in vivo testing and predict the properties of designed or developed nanomaterials. We propose here a new in silico method for rapid cytotoxicity assessment of two-dimensional nanomaterials of arbitrary chemical composition by using free energy analysis and molecular dynamics simulations, which can be expressed by a computational indicator of nanotoxicity (CIN_2D). We applied this approach to five well-known two-dimensional nanomaterials promising for biomedical applications: graphene, graphene oxide, layered double hydroxide, aloohene, and hexagonal boron nitride nanosheets. The results corroborate the available laboratory biosafety data for these nanomaterials, supporting the applicability of the developed method for predictive nanotoxicity assessment of two-dimensional nanomaterials.

Strategy for Cytoplasmic Delivery Using Inorganic Particles

Endosome escape is a key process for intracellular uptake of intact biomolecules and therapeutics, such as nucleic acids. Lysosome escape is a more common pathway during endocytosis, while some biomolecular, organic and inorganic materials are found to enhance the endosome escape, and several mechanisms have been proposed accordingly. Specifically, some inorganic nanomaterials show their unique mechanisms of action for enhanced endosome escape, including salt osmotic effect and gas blast effect. These inorganic nanomaterials are basically weakly alkaline and are naturally featured with the anti-acidification capacity, with limited solubility in neutral solutions. This review paper has briefly presented the strategies in the design of inorganic nanoparticle-based cellular delivery vehicles with endosome escapability and discussed a few typical inorganic nanomaterials that are currently widely examined for delivery purpose. A brief summary and prospect for this kind of inorganic nanomaterials are provided.

Functionalized layered double hydroxide nanoparticles as an intelligent nanoplatform for synergistic photothermal therapy and chemotherapy of tumors

In this work, a novel layered double hydroxide (LDH)-based multifunctional nanoplatform was built for synergistic photothermal therapy (PTT)/chemotherapy. The platform was modified using the peptide B3int to target cancer cells with overexpression of integrin αvβ3. Indocyanine green (ICG) and doxorubicin (DOX) were loaded into the nanocarrier (LDH-PEG-B3int NPs) to form a system having a high drug loading (18.62%) and a remarkable photothermal conversion efficiency of 25.38%. It also showed pH-responsive and near-infrared (NIR)-triggered DOX release. In vitro and in vivo studies indicated that the anti-tumor activity of the combined delivery system was significantly higher than that of a single delivery system. This co-delivery nanosystem may be helpful for future application in the clinical treatment of cancer.

Sheet-like clay nanoparticles deliver RNA into developing pollen to efficiently silence a target gene

Topical application of double-stranded RNA (dsRNA) can induce RNA interference (RNAi) and modify traits in plants without genetic modification. However, delivering dsRNA into plant cells remains challenging. Using developing tomato (Solanum lycopersicum) pollen as a model plant cell system, we demonstrate that layered double hydroxide (LDH) nanoparticles up to 50 nm in diameter are readily internalized, particularly by early bicellular pollen, in both energy-dependent and energy-independent manners and without physical or chemical aids. More importantly, these LDH nanoparticles efficiently deliver dsRNA into tomato pollen within 2-4 h of incubation, resulting in an 89% decrease in transgene reporter mRNA levels in early bicellular pollen 3-d post-treatment, compared with a 37% decrease induced by the same dose of naked dsRNA. The target gene silencing is dependent on the LDH particle size, the dsRNA dose, the LDH-dsRNA complexing ratio, and the treatment time. Our findings indicate that LDH nanoparticles are an effective nonviral vector for the effective delivery of dsRNA and other biomolecules into plant cells.

Ferrous ions doped layered double hydroxide: smart 2D nanotheranostic platform with imaging-guided synergistic chemo/photothermal therapy for breast cancer

Developing simple and efficient nanotheranostic platforms with behavior responsive to the acid microenvironment of a tumor is of great significance for accurate tumor diagnosis and therapy. In this study, a smart 2D nanotheranostic platform has been successfully fabricated by doping functional ferrous ions into as-synthesized MgAl-layered double hydroxide (LDH) with doxurubicin (DOX) loading to form Fe-LDH/DOX NPs, which achieved magnetic resonance imaging (MRI)-guided synergistic chemo/photothermal therapy for breast cancer. The doping of ferrous ions into Fe-LDH/DOX enabled a strong photo-induced heating ability with a high photothermal conversion efficiency of 45.67%, which could be combined with the antitumor drug DOX to achieve the synergistic effect of photothermal therapy (PTT) and chemotherapy for killing tumor cells. Additionally, its in vitro pH-dependent degradation behavior and T₂-weighted MRI effect revealed that the as-prepared Fe-LDH/DOX is sensitive to the tumor acid microenvironment. Most importantly, the growth rate of tumors in 4T1 bearing mice could be effectively inhibited after the synergistic treatment of PTT and chemotherapy by Fe-LDH/DOX. These results show that doping functional metal ions into LDH NPs may open a novel approach to fabricating an LDH NP-based nanotheranostics platform with advanced diagnostic and therapeutic performances.

Hydrotalcite-Embedded Magnetite Nanoparticles for Hyperthermia-Triggered Chemotherapy

A magnetic nanocomposite, consisting of Fe₃O₄ nanoparticles embedded into a Mg/Al layered double hydroxide (LDH) matrix, was developed for cancer multimodal therapy, based on the combination of local magnetic hyperthermia and thermally induced drug delivery. The synthesis procedure involves the sequential hydrolysis of iron salts (Fe²⁺, Fe³⁺) and Mg²⁺/Al³⁺ nitrates in a carbonate-rich mild alkaline environment followed by the loading of 5-fluorouracil, an anionic anticancer drug, in the interlayer LDH space. Magnetite nanoparticles with a diameter around 30 nm, dispersed in water, constitute the hyperthermia-active phase able to generate a specific loss of power of around 500 W/g-Fe in an alternating current (AC) magnetic field of 24 kA/m and 300 kHz as determined by AC magnetometry and calorimetric measurements. Heat transfer was found to trigger a very rapid release of drug which reached 80% of the loaded mass within 10 min exposure to the applied field. The potential of the Fe₃O₄/LDH nanocomposites as cancer treatment agents with minimum side-effects, owing to the exclusive presence of inorganic phases, was validated by cell internalization and toxicity assays.

Recent Advances of Cell Membrane Coated Nanoparticles in Treating Cardiovascular Disorders

Cardiovascular diseases (CVDs) are the leading cause of death worldwide, causing approximately 17.9 million deaths annually, an estimated 31% of all deaths, according to the WHO. CVDs are essentially rooted in atherosclerosis and are clinically classified into coronary heart disease, stroke and peripheral vascular disorders. Current clinical interventions include early diagnosis, the insertion of stents, and long-term preventive therapy. However, clinical diagnostic and therapeutic tools are subject to a number of limitations including, but not limited to, potential toxicity induced by contrast agents and unexpected bleeding caused by anti-platelet drugs. Nanomedicine has achieved great advancements in biomedical area. Among them, cell membrane coated nanoparticles, denoted as CMCNPs, have acquired enormous expectations due to their biomimetic properties. Such membrane coating technology not only helps avoid immune clearance, but also endows nanoparticles with diverse cellular and functional mimicry. In this review, we will describe the superiorities of CMCNPs in treating cardiovascular diseases and their potentials in optimizing current clinical managements.