Research on the influence of polar solvents on CsPbBr3 perovskite QDs

Ligand Engineering of Inorganic Lead Halide Perovskite Quantum Dots toward High and Stable Photoluminescence

The ligand engineering of inorganic lead halide perovskite quantum dots (PQDs) is an indispensable strategy to boost their photoluminescence stability, which is pivotal for optoelectronics applications. CsPbX3 (X = Cl, Br, I) PQDs exhibit exceptional optical properties, including high color purity and tunable bandgaps. Despite their promising characteristics, environmental sensitivity poses a challenge to their stability. This article reviews the solution-based synthesis methods with ligand engineering. It introduces the impact of factors like humidity, temperature, and light exposure on PQD's instability, as well as in situ and post-synthesis ligand engineering strategies. The use of various ligands, including X- and L-type ligands, is reviewed for their effectiveness in enhancing stability and luminescence performance. Finally, the significant potential of ligand engineering for the broader application of PQDs in optoelectronic devices is also discussed.

Macromers for Encapsulating Perovskite Photovoltaics and Achieving High Stability

Perovskite solar cells (pero-SCs) are highly unstable even under trace water. Although the blanket encapsulation (BE) strategy applied in the industry can effectively block moisture invasion, the commercial UV-curable adhesives (UVCAs) for BE still trigger power conversion efficiency deterioration, and the degradation mechanism remains unknown. For the first time, the functions of commercial UVCAs are revealed in BE-processed pero-SCs, where the small-sized monomer easily permeates to the perovskite surface, forming an insulating barrier to block charge extraction, while the high-polarity moiety can destroy perovskite lattice. To solve these problems, a macromer, named PIBA is carefully designed, by grafting two acrylate terminal groups on the highly gastight polyisobutylene and realizes an increased molecular diameter as well as avoided high-polarity groups. The PIBA macromer can stabilize on pero-SCs and then sufficiently crosslink, forming a compact and stable network under UV light without sacrificing device performance during the BE process. The resultant BE devices show negligible efficiency loss after storage at 85% relative humidity for 2000 h. More importantly, these devices can even reach ISO 20653:2013 Degrees of protection IPX7 standard when immersed in one-meter-deep water. This BE strategy shows good universality in enhancing the moisture stability of pero-SCs, irrespective of the perovskite composition or device structure.

Data-Driven Controlled Synthesis of Oriented Quasi-Spherical CsPbBr3 Perovskite Materials

Controlled synthesis of lead-halide perovskite crystals is challenging yet attractive because of the pivotal role played by the crystal structure and growth conditions in regulating their properties. This study introduces data-driven strategies for the controlled synthesis of oriented quasi-spherical CsPbBr3, alongside an investigation into the synthesis mechanism. High-throughput rapid characterization of absorption spectra and color under ultraviolet illumination was conducted using 23 possible ligands for the synthesis of CsPbBr3 crystals. The links between the absorption spectra slope (difference in the absorbance at 400 nm and 450 nm divided by a wavelength interval of 50 nm) and crystal size were determined through statistical analysis of more than 100 related publications. Big data analysis and machine learning were employed to investigate a total of 688 absorption spectra and 652 color values, revealing correlations between synthesis parameters and properties. Ex situ characterization confirmed successful synthesis of oriented quasi-spherical CsPbBr3 perovskites using polyvinylpyrrolidone and Acacia. Density functional theory calculations highlighted strong adsorption of Acacia on the (110) facet of CsPbBr3. Optical properties of the oriented quasi-spherical perovskites prepared with these data-driven strategies were significantly improved. This study demonstrates that data-driven controlled synthesis facilitates morphology-controlled perovskites with excellent optical properties.

Proton-Prompted Ligand Exchange to Achieve High-Efficiency CsPbI3 Quantum Dot Light-Emitting Diodes

CsPbI3 perovskite quantum dots (QDs) are ideal materials for the next generation of red light-emitting diodes. However, the low phase stability of CsPbI3 QDs and long-chain insulating capping ligands hinder the improvement of device performance. Traditional in-situ ligand replacement and ligand exchange after synthesis were often difficult to control. Here, we proposed a new ligand exchange strategy using a proton-prompted in-situ exchange of short 5-aminopentanoic acid ligands with long-chain oleic acid and oleylamine ligands to obtain stable small-size CsPbI3 QDs. This exchange strategy maintained the size and morphology of CsPbI3 QDs and improved the optical properties and the conductivity of CsPbI3 QDs films. As a result, high-efficiency red QD-based light-emitting diodes with an emission wavelength of 645 nm demonstrated a record maximum external quantum efficiency of 24.45% and an operational half-life of 10.79 h.

Stabilized Perovskite Quantum Dot Solids via Nonpolar Solvent Dispersible Covalent Ligands

The ligand exchange procedure of CsPbI3 perovskite quantum dots (PQDs) enables the fabrication of thick and conductive PQD solids that act as a photovoltaic absorber for solution-processed thin-film solar cells. However, the ligand-exchanged CsPbI3 PQD solids suffer from deterioration in photovoltaic performance and ambient stability due to the surface traps, such as uncoordinated Pb2+ sites on the PQD surface, which are generated after the conventional ligand exchange process using ionic short-chain ligands dissolved in polar solvents. Herein, a facile surface stabilization is demonstrated that can simultaneously improve the photovoltaic performance and ambient stability of CsPbI3 PQD photovoltaic absorber using covalent short-chain triphenylphosphine oxide (TPPO) ligands dissolved in a nonpolar solvent. It is found that the TPPO ligand can be covalently bound to uncoordinated Pb2+ sites and the nonpolar solvent octane can completely preserve the PQD surface components. Owing to their synergetic effects, the CsPbI3 PQD photovoltaic absorber stabilized using the TPPO ligand solution dissolved in octane exhibit higher optoelectrical properties and ambient stability than the control absorber. Consequently, CsPbI3 PQD solar cells composed of PQD photovoltaic absorbers fabricated via surface stabilization strategy provide an improved power conversion efficiency of 15.4% and an enhanced device stability.

Microencapsulation of Lead-Halide Perovskites in an Oil-in-Fluorine Emulsion for Cell Imaging

The superior optical properties of lead-halide perovskites (LHPs) inspired significant research in cell imaging applications; many encapsulating processes have improved perovskite stabilities with comparable biosafety. Herein, facile solvent evaporation encapsulation based on an oil-in-fluorine emulsion for aqueous-stable and extremely nontoxic LHP microcapsules is described. Perfluorooctane dispersed the emulsifier fluorocarbon surfactant to form a continuous fluorine phase, while LHPs and polymethylmethacrylate (PMMA) were dispersed in 1,2-dichloroethane, then emulsified in the fluorine phase to form an oil-in-fluorine emulsion. CsPbBr₃ microcapsules with a dense PMMA shell that protect fragile CsPbBr₃ from the external environment and inhibit lead ion release were obtained after solvent evaporation. The CsPbBr₃ microcapsules not only retained 91% of fluorescence intensity after exposure to water for 30 d but also possess extremely low cytotoxicity for MCF-7 cells. After exposure to 2 mg/mL of CsPbBr₃ microcapsules for 48 h, the cell viability remained >90%. The intracellular uptake of CsPbBr₃ microcapsules indicates its potential use in cell imaging.

Lattice-Distortion-Induced Change in the Magnetic Properties in Br-Defect Host CsPbBr3 Perovskite Quantum Dots

Herein, we report temperature- and field-induced magnetic states in CsPbBr₃ perovskite quantum dots (PQDs) attributed to Br defects. We find that temperature-dependent structural distortion is the main source of various temperature-induced magnetic states in Br-defect host CsPbBr₃ PQDs. Comprehensively examined magnetization data through Arrott plots, Langevin and Brillouin function fitting, and structural analysis reveal the presence of various oxidation states (i.e., Pb⁰, Pb⁺, Pb²⁺, and Pb³⁺) yielding different magnetic states, such as diamagnetic states above 90 K, paramagnetic states below ≈90 K, and perhaps locally ordered states between 58 and 90 K. It is realized from theoretical fits that paramagnetic ions exist (i.e., superparamagnetic behavior) due to Br defects causing Pb⁺ (and/or Pb³⁺ ions) in the diamagnetic region. We anticipate that our findings will spur future research of the development of spin-optoelectronics, such as spin light-emitting diodes, and spintronics devices based on CsPbBr₃ PQDs.

Metal Halide Perovskite Nanowires: Controllable Synthesis, Mechanism, and Application in Optoelectronic Devices

Metal halide perovskites are promising energy materials because of their high absorption coefficients, long carrier lifetimes, strong photoluminescence, and low cost. Low-dimensional halide perovskites, especially one-dimensional (1D) halide perovskite nanowires (NWs), have become a hot research topic in optoelectronics owing to their excellent optoelectronic properties. Herein, we review the synthetic strategies and mechanisms of halide perovskite NWs in recent years, such as hot injection, vapor phase growth, selfassembly, and solvothermal synthesis. Furthermore, we summarize their applications in optoelectronics, including lasers, photodetectors, and solar cells. Finally, we propose possible perspectives for the development of halide perovskite NWs.

Comprehensive study upon physicochemical properties of bio-ZnO NCs

In this study, for the first time, the comparison of commercially available chemical ZnO NCs and bio-ZnO NCs produced extracellularly by two different probiotic isolates (Latilactobacillus curvatus MEVP1 [OM736187] and Limosilactobacillus fermentum MEVP2 [OM736188]) were performed. All types of ZnO formulations were characterized by comprehensive interdisciplinary approach including various instrumental techniques in order to obtain nanocomposites with suitable properties for further applications, i.e. biomedical. Based on the X- ray diffraction analysis results, all tested nanoparticles exhibited the wurtzite structure with an average crystalline size distribution of 21.1 nm (CHEM_ZnO NCs), 13.2 nm (1C_ZnO NCs) and 12.9 nm (4a_ZnO NCs). The microscopy approach with use of broad range of detectors (SE, BF, HAADF) revealed the core-shell structure of bio-ZnO NCs, compared to the chemical one. The nanoparticles core of 1C and 4a_ZnO NCs are coated by the specific organic deposit coming from the metabolites produced by two probiotic strains, L. fermentum and L. curvatus. Vibrational infrared spectroscopy, photoluminescence (PL) and mass spectrometry (LDI-TOF-MS) have been used to monitor the ZnO NCs surface chemistry and allowed for better description of bio-NCs organic coating composition (amino acids residues). The characterized ZnO formulations were then assessed for their photocatalytic properties against methylene blue (MB). Both types of bio-ZnO NCs exhibited good photocatalytic activity, however, the effect of CHEM_ZnO NCs was more potent than bio-ZnO NCs. Finally, the colloidal stability of the tested nanoparticles were investigated based on the zeta potential (ZP) and hydrodynamic diameter measurements in dependence of the nanocomposites concentration and investigation time. During the biosynthesis of nano-ZnO, the increment of pH from 5.7 to around 8 were observed which suggested possible contribution of zinc aquacomplexes and carboxyl-rich compounds resulted in conversion of zinc tetrahydroxy ion complex to ZnO NCs. Overall results in present study suggest that used accessible source such us probiotic strains, L. fermentum and L. curvatus, for extracellular bio-ZnO NCs synthesis are of high interest. What is important, no significant differences between organic deposit (e.g. metabolites) produced by tested strains were noticed-both of them allowed to form the nanoparticles with natural origin coating. In comparison to chemical ZnO NCs, those synthetized via microbiological route are promising material with further biological potential once have shown high stability during 7 days.

Photocatalytic Deposition of Nanostructured CsPbBr3 Perovskite Quantum Dot Films on Mesoporous TiO2 and Their Enhanced Visible-Light Photodegradation Properties

Herein, we report the in situ photocatalytic deposition of cesium lead bromide (CsPbBr₃) perovskite quantum dots on mesoporous TiO₂-coated fluorine-doped tin oxide (FTO/TiO₂) electrodes. The mesoporous TiO₂ layer is used as a photocatalyst to promote the following: (1) the Pb deposition from a Pb²⁺ aqueous solution and (2) the in situ Pb conversion into CsPbBr₃ perovskite in the presence of a CsBr methanolic solution without any organic capping agent. Both steps are carried out under ultraviolet light irradiation under ambient conditions without any post-treatment. The obtained FTO/TiO₂/CsPbBr₃ film was characterized by UV-vis diffuse reflectance spectroscopy, X-ray diffraction, photoluminescence spectroscopy, scanning electron microscopy, and transmission electron microscopy. The FTO/TiO₂/CsPbBr₃ heterojunction exhibited enhanced visible-light photodegradation activity demonstrated for the oxidation of curcumin organic dye as a model system. The novel and simple approach to fabricating a supported photocatalyst represents a scalable general method to use semiconductors as a platform to incorporate different perovskites, either all-inorganic or hybrid, for optoelectronic applications. The perovskite deposition method mediated by the UV light at room temperature could be further applied to flexible and wearable solar power electronics.

Quantum Efficiency Enhancement of Lead-Halide Perovskite Nanocrystal LEDs by Organic Lithium Salt Treatment

Surface-defect passivation is key to achieving a high photoluminescence quantum yield in lead halide perovskite nanocrystals. However, in perovskite light-emitting diodes, these surface ligands also have to enable balanced charge injection into the nanocrystals to yield high efficiency and operational lifetime. In this respect, alkaline halides have been reported to passivate surface trap states and increase the overall stability of perovskite light emitters. On the one side, the incorporation of alkaline ions into the lead halide perovskite crystal structure is considered to counterbalance cation vacancies, whereas on the other side, the excess halides are believed to stabilize the colloids. Here, we report an organic lithium salt, viz. LiTFSI, as a halide-free surface passivation on perovskite nanocrystals. We show that treatment with LiTFSI has multiple beneficial effects on lead halide perovskite nanocrystals and LEDs derived from them. We obtain a higher photoluminescence quantum yield and a longer exciton lifetime and a radiation pattern that is more favorable for light outcoupling. The ligand-induced dipoles on the nanocrystal surface shift their energy levels toward a lower hole-injection barrier. Overall, these effects add up to a 4- to 7-fold boost of the external quantum efficiency in proof-of-concept LED structures, depending on the color of the used lead halide perovskite nanocrystal emitters.

Highly Efficient A-Site Cation Exchange in Perovskite Quantum Dot for Solar Cells

The mixed cation colloidal Cs1-XFAXPbI3 perovskite quantum dots (PQDs) obtained by cation exchange between CsPbI3 and FAPbI3 PQDs has been reported to exhibit enhanced photovoltaic performance. However, the cation exchange mechanism requires further in-depth investigation in terms of both material properties and device application. In this work, the impact of PQDs weight ratio, PQDs concentration and host solvent polarity during cation exchange is comprehensively investigated for the first time. In addition, the whole exchange process under varying conditions is monitored by photoluminescence spectroscopy. As a result, we observe extremely fast cation exchange (approximately 20 minutes) under a condition of CsPbI3/FAPbI3 PQD weight ratio=1:1, a concentration of 70 mg/mL and host solvent using toluene. Moreover, we directly fabricate PQDs solar cell device using these obtained mixed cation Cs0.5FA0.5PbI3 PQDs and achieved an enhanced power conversion efficiency of 14.58%. We believe these results would provide more insights into the cation exchange in emerging PQDs towards efficient photovoltaic fabrication and application.

High-yield synthesis of CsPbBr3nanoparticles: diphenylphosphine as a reducing agent and its effect in Pb-seeding nucleation and growth

Based on the reported nucleation mechanisms for CsPbX₃and II-VI/IV-VI quantum dots, CsPbBr₃nanoparticles with a higher reaction-yield (up to 393% mass-increment) were synthetized by the hot-injection method. The introduction of diphenylphosphine (DPP) as a reducing agent improved nanoparticle nucleation and growth, giving out evidence for Pb-seeding in CsPbBr₃nanoparticles formation. Additionally, a clear influence of the DPP in a CsPbBr₃-Cs₄PbBr₆incomplete phase transformation was observed, marked by the appearance of several PbBr₂nanoparticles. This indicated the need for an improved ratio between the stabilizing agents and the precursors, due to the increased number of nucleation sites produced by DPP. The resulting CsPbBr₃nanoparticles showed high quality, as they displayed 70%-90% photoluminescence quantum yield; narrow size distribution with an average nanoparticle size of∼10 nm; and the characteristic cubic morphology reported in previous works. This increment in CsPbBr₃nanoparticles' reaction yield will contribute to making them a more attractive option for different optoelectronic applications.