MnO2 nanosheets as a carrier and accelerator for improved live-cell biosensing application of CRISPR/Cas12a

RNA-Activated CRISPR/Cas12a Nanorobots Operating in Living Cells

Active clustered regularly interspaced short palindromic repeats (CRISPR/Cas12a) systems possess both cis-cleavage (targeted) and trans-cleavage (collateral) activities, which are useful for genome engineering and diagnostic applications. Both single- and double-stranded DNA can activate crRNA-Cas12a ribonucleoprotein (RNP) to achieve cis- and trans-cleavage enzymatic activities. However, it is not clear whether RNA can activate the CRISPR/Cas12a system and what is critical to the trans-cleavage activity. We report here that RNA can activate the CRISPR/Cas12a system and trigger its trans-cleavage activity. We reveal that the activated crRNA-Cas12a RNP favors the trans-cleavage of longer sequences than commonly used. These new findings of the RNA-activated trans-cleavage capability of Cas12a provided the foundation for the design and construction of CRISPR nanorobots that operate in living cells. We assembled the crRNA-Cas12a RNP and nucleic acid substrates on gold nanoparticles to form CRISPR nanorobots, which dramatically increased the local effective concentration of the substrate in relation to the RNP and the trans-cleavage kinetics. Binding of the target microRNA to the crRNA-Cas12a RNP activated the nanorobots and their trans-cleavage function. The repeated (multiple-turnover) trans-cleavage of the fluorophore-labeled substrates generated amplified fluorescence signals. Sensitive and real-time imaging of specific microRNA in live cells demonstrated the promising potential of the CRISPR nanorobot system for future applications in monitoring and modulating biological functions within living cells.

Non-canonical CRISPR/Cas12a-based technology: A novel horizon for biosensing in nucleic acid detection

Nucleic acids are essential biomarkers in molecular diagnostics. The CRISPR/Cas system has been widely used for nucleic acid detection. Moreover, canonical CRISPR/Cas12a based biosensors can specifically recognize and cleave target DNA, as well as single-strand DNA serving as reporter probe, which have become a super star in recent years in the field of nucleic acid detection due to its high specificity, universal programmability and simple operation. However, canonical CRISPR/Cas12a based biosensors are hard to meet the requirements of higher sensitivity, higher specificity, higher efficiency, larger target scope, easier operation, multiplexing, low cost and diversified signal reading. Then, advanced non-canonical CRISPR/Cas12a based biosensors emerge. In this review, applications of non-canonical CRISPR/Cas12a-based biosensors in nucleic acid detection are summarized. And the principles, peculiarities, performances and perspectives of these non-canonical CRISPR/Cas12a based biosensors are also discussed.

Allosteric Activator-Regulated CRISPR/Cas12a System Enables Biosensing and Imaging of Intracellular Endogenous and Exogenous Targets

Sensors designed based on the trans-cleavage activity of CRISPR/Cas12a systems have opened up a new era in the field of biosensing. The current design of CRISPR/Cas12-based sensors in the "on-off-on" mode mainly focuses on programming the activator strand (AS) to indirectly switch the trans-cleavage activity of Cas12a in response to target information. However, this design usually requires the help of additional auxiliary probes to keep the activator strand in an initially "blocked" state. The length design and dosage of the auxiliary probe need to be strictly optimized to ensure the lowest background and the best signal-to-noise ratio. This will inevitably increase the experiment complexity. To solve this problem, we propose using AS after the "RESET" effect to directly regulate the Cas12a enzymatic activity. Initially, the activator strand was rationally designed to be embedded in a hairpin structure to deprive its ability to activate the CRISPR/Cas12a system. When the target is present, target-mediated strand displacement causes the conformation change in the AS, the hairpin structure is opened, and the CRISPR/Cas12a system is reactivated; the switchable structure of AS can be used to regulate the degree of activation of Cas12a according to the target concentration. Due to the advantages of low background and stability, the CRISPR/Cas12a-based strategy can not only image endogenous biomarkers (miR-21) in living cells but also enable long-term and accurate imaging analysis of the process of exogenous virus invasion of cells. Release and replication of virus genome in host cells are indispensable hallmark events of cell infection by virus; sensitive monitoring of them is of great significance to revealing virus infection mechanism and defending against viral diseases.

Genetically engineered virus-like particle-armoured and multibranched DNA scaffold-corbelled ultra-sensitive hierarchical hybridization chain reaction for targeting-enhanced imaging in living biosystems under spatiotemporal light powering

Although nucleic acids-based fluorescent biosensors, exemplified by the hybridization chain reaction (HCR), have exhibited promise as an imaging tool for detecting disease-related biomolecular makers in living biosystems, they still face certain challenges. These include the need for improved sensitivity, poor bio-targeting capability, the absence of signal enrichment interface and the uncontrollable biosensing initiation. Herein, we present a range of effective solutions. First, a stacking design resembling building blocks is used to construct a special hierarchical HCR (termed H-HCR), for which a hierarchical bridge is employed to graft multiunit HCR products. Furthermore, the H-HCR components are encapsulated into a virus-like particle (VLP) endowed with a naturally peptide-mediated targeting unit through genetic engineering of plasmids, after which the biosensor can specifically identify cancer cytomembranes. By further creating a multibranched DNA scaffold to enrich the H-HCR produced detection signals, the biosensor's analyte recognition module is inserted with a photocleavage-linker, allowing that the biosensing process can be spatiotemporally initiated via a light-powered behavior. Following these innovations, this genetically engineered VLP-armoured and multibranched DNA-scaffold-corbelled H-HCR demonstrates an ultra-sensitive and specific biosensing performance to a cancer-associated microRNA marker (miRNA-155). Beyond the worthy in vitro analysis, our method is also effective in performing imaging assays for such low-abundance analyte in living cells and even bodies, thus providing a roust platform for disease diagnosis.

Photoactivatable CRISPR/Cas12a Sensors for Biomarkers Imaging and Point-of-Care Diagnostics

In recent years, the CRISPR/Cas12a-based sensing strategy has shown significant potential for specific target detection due to its rapid and sensitive characteristics. However, the "always active" biosensors are often insufficient to manipulate nucleic acid sensing with high spatiotemporal control. It remains crucial to develop nucleic acid sensing devices that can be activated at the desired time and space by a remotely applied stimulus. Here, we integrated photoactivation with the CRISPR/Cas12a system for DNA and RNA detection, aiming to provide high spatiotemporal control for nucleic acid sensing. By rationally designing the target recognition sequence, this photoactivation CRISPR/Cas12a system could recognize HPV16 and survivin, respectively. We combined the lateral flow assay strip test with the CRISPR/Cas12a system to realize the visualization of nucleic acid cleavage signals, displaying potential instant test application capabilities. Additionally, we also successfully realized the temporary control of its fluorescent sensing activity for survivin by photoactivation in vivo, allowing rapid detection of target nucleic acids and avoiding the risk of contamination from premature leaks during storage. Our strategy suggests that the CRISPR/Cas12a platform can be triggered by photoactivation to sense various targets, expanding the technical toolbox for precise biological and medical analysis. This study represents a significant advancement in nucleic acid sensing and has potential applications in disease diagnosis and treatment.

DNA Robots for CRISPR/Cas12a Activity Management and Universal Platforms for Biosensing

The CRISPR/Cas12a system is a revolutionary genome editing technique that is widely employed in biosensing and molecular diagnostics. However, there are few reports on precisely managing the trans-cleavage activity of Cas12a by simple modification since the traditional methods to manage Cas12a often require difficult and rigorous regulation of core components. Hence, we developed a novel CRISPR/Cas12a regulatory mechanism, named DNA Robots for Enzyme Activity Management (DREAM), by introducing two simple DNA robots, apurinic/apyrimidinic site (AP site) or nick on target activator. First, we revealed the mechanism of how the DREAM strategy precisely regulated Cas12a through different binding affinities. Second, the DREAM strategy was found to improve the selectivity of Cas12a for identifying base mismatch. Third, a modular biosensor for base excision repair enzymes based on the DREAM strategy was developed by utilizing diversified generation ways of DNA robots, and a multi-signal output platform such as fluorescence, colorimetry, and visual lateral flow strip was constructed. Furthermore, we extended logic sensing circuits to overcome the barrier that Cas12a could not detect simultaneously in a single tube. Overall, the DREAM strategy not only provided new prospects for programmable Cas12a biosensing systems but also enabled portable, specific, and humanized detection with great potential for molecular diagnostics.

Recent progress on the CRISPR/Cas system in optical biosensors

Clustered regularly interspaced short palindromic repeats (CRISPR) and CRISPR-associated (Cas) protein systems are adaptive immune systems unique to archaea and bacteria, with the characteristics of targeted recognition and gene editing to resist the invasion of foreign nucleic acids. Biosensors combined with the CRISPR/Cas system and optical detection technology have attracted much attention in medical diagnoses, food safety, agricultural progress, and environmental monitoring owing to their good sensitivity, high selectivity, and fast detection efficiency. In this review, we introduce the mechanism of CRISPR/Cas systems and developments in this area, followed by summarizing recent progress on CRISPR/Cas system-based optical biosensors combined with colorimetric, fluorescence, electrochemiluminescence and surface-enhanced Raman scattering optical techniques in various fields. Finally, we discuss the challenges and future perspectives of CRISPR/Cas systems in optical biosensors.

Photoresponsive CHA-Integrated Self-Propelling 3D DNA Walking Amplifier within the Concentration Localization Effect of DNA Molecular Framework Enables Highly Efficient Fluorescence Bioimaging

While three-dimensional (3D) DNA walking amplifiers hold considerable promise in the construction of advanced DNA-based fluorescent biosensors for bioimaging, they encounter certain difficulties such as inadequate sensitivity, premature activation, the need for exogenous propelling forces, and low reaction rates. In this contribution, a variety of profitable solutions have been explored. First, a catalytic hairpin assembly (CHA)-achieved nonenzymatic isothermal nucleic acid amplification is integrated to enhance sensitivity. Subsequently, one DNA component is simply functionalized with a photocleavage-bond to conduct a photoresponsive manner, whereby the target recognition occurs only when the biosensor is exposed to an external ultraviolet light source, overcoming premature activation during biodelivery. Furthermore, a special self-propelling walking mechanism is implemented by reducing biothiols to MnO2 nanosheets, thereby propelling forces that are self-supplied to a Mn2+-reliant DNAzyme. By carrying the biosensing system with a DNA molecular framework to induce a unique concentration localization effect, the nucleic acid contact reaction rate is notably elevated by 6 times. Following these, an ultrasensitive in vitro detection performance with a limit of detection down to 2.89 fM is verified for a cancer-correlated microRNA biomarker (miRNA-21). Of particular importance, our multiple concepts combined 3D DNA walking amplifier that enables highly efficient fluorescence bioimaging in live cells and even bodies, exhibiting a favorable application prospect in disease analysis.

DNA Gate-Based CRISPR-Cas Exponential Amplification System for Ultrasensitive Small Extracellular Vesicle Detection to Enhance Breast Cancer Diagnosis

Tumor-derived small extracellular vesicles (tEVs) as potential biomarkers possess abundant surface proteins closely related to parent cells, which are crucial for noninvasive cancer diagnosis. However, tEVs exhibit phenotype heterogeneity and low abundance, posing a significant challenge for multiplex detection with a high sensitivity. Herein, we developed a DNA gate-based exponential amplification CRISPR-Cas (DGEAC) system for accurate and ultrasensitive detection of tEVs, which can greatly improve the accuracy of breast cancer (BC) diagnosis. Based on the coexpression of CD63 and vascular endothelial growth factor (VEGF) on BC-derived tEVs, we developed a dual-aptamer-based AND gate fluorescent probe by proximity hybridization. By integrating the target recognition and trans-cleavage activity of Cas12a, an autocatalysis-driven exponential amplification circuit was developed for ultrasensitive detection of CD63 and VEGF proteins on tEVs, which could avoid false negative signals from single protein or other interfering proteins. We achieved highly sensitive detection of tEVs over a linear range from 1.75 × 103 to 3.5 × 108 particles/mL with a detection limit as low as 1.02 × 103 particles/mL. Furthermore, the DGEAC system can distinguish tEVs from tEVs derived from different BC cell lines, including MDA-MB-231, MCF-7, SKBR3, and MCF-10A. Compared to linear amplification (AUC 90.0%), the DGEAC system effectively differentiates BC in different stages (AUC 98.3%).

Ultrasensitive miRNA Detection Based on Magnetic Upconversion Nanoparticle Enhancement and CRISPR/Cas13a-Driven Signal Amplification

MicroRNAs (miRNAs), a class of small molecules with important regulatory functions, have been widely used in the field of biosensing as biomarkers for the early diagnosis of various diseases. Therefore, it is crucial to develop an miRNA detection platform with high sensitivity and specificity. Here, we have designed a CRISPR/Cas13-based enzymatic cyclic amplification system and regarded the magnetic upconversion nanoparticles (MUCNPs) as a biosensor of outputting the detection signal for the highly sensitive and high-fidelity detection of miRNAs. MUCNPs were composed of UCNPs (fluorescence donors) and Fe3O4@AuNPs (fluorescence acceptors) through double-stranded DNA hybrid coupling. The target miRNA acted as an activator, which could activate the trans-cleavage activity of Cas13a to the well-designed Trigger containing two uracil ribonucleotides (rU) in its loop and trigger a strand displacement reaction to generate a large amount of single-stranded DNA, resulting in the release of the UCNPs from MUCNPs. Benefiting from the high fidelity and high selectivity of CRISPR/Cas13a, the great effect of triggered enzymatic cycle amplification, and the high-intensity luminescent signal of MUCNPs, this method possessed miRNA detection capability with high sensitivity and specificity even in the complex environment with 10% fetal bovine serum (FBS) and a serum sample. Meanwhile, the detection limit could be as low as 83.2 fM. In addition, this method effectively reduced the effect of photobleaching and maintained high stability, which was expected to achieve efficient and sensitive miRNA detection.

CRISPR/Cas-Assisted Nanoneedle Sensor for Adenosine Triphosphate Detection in Living Cells

The clustered regularly interspaced short palindromic repeats (CRISPR)-associated protein (Cas) (CRISPR/Cas) systems have recently emerged as powerful molecular biosensing tools based on their collateral cleavage activity due to their simplicity, sensitivity, specificity, and broad applicability. However, the direct application of the collateral cleavage activity for in situ intracellular detection is still challenging. Here, we debut a CRISPR/Cas-assisted nanoneedle sensor (nanoCRISPR) for intracellular adenosine triphosphate (ATP), which avoids the challenges associated with intracellular collateral cleavage by introducing a two-step process of intracellular target recognition, followed by extracellular transduction and detection. ATP recognition occurs by first presenting in the cell cytosol an aptamer-locked Cas12a activator conjugated to nanoneedles; the recognition event unlocks the activator immobilized on the nanoneedles. The nanoneedles are then removed from the cells and exposed to the Cas12a/crRNA complex, where the activator triggers the cleavage of an ssDNA fluorophore-quencher pair, generating a detectable fluorescence signal. NanoCRISPR has an ATP detection limit of 246 nM and a dynamic range from 1.56 to 50 μM. Importantly, nanoCRISPR can detect intracellular ATP in 30 min in live cells without impacting cell viability. We anticipate that the nanoCRISPR approach will contribute to broadening the biomedical applications of CRISPR/Cas sensors for the detection of diverse intracellular molecules in living systems.

Low-Background CRISPR/Cas12a Sensors for Versatile Live-Cell Biosensing

The trans-cleavage activity of CRISPR/Cas12a has been widely used in biosensing. However, many CRISPR/Cas12a-based biosensors, especially those that work in "on-off-on" mode, usually suffer from high background and thus impossible intracellular application. Herein, this problem is efficiently overcome by elaborately designing the activator strand (AS) of CRISPR/Cas12a using the "RESET" effect found by our group. The activation ability of the as-designed AS to CRISPR/Cas12a can be easily inhibited, thus assuring a low background for subsequent biosensing applications, which not only benefits the detection sensitivity improvement of CRISPR/Cas12a-based biosensors but also promotes their applications in live cells as well as makes it possible to design high-performance biosensors with greatly improved flexibility, thus achieving the analysis of a wide range of targets. As examples, by using different strategies such as strand displacement, strand cleavage, and aptamer-substrate interaction to reactivate the inhibited enzyme activity, several CRISPR/Cas12a-based biosensing systems are developed for the sensitive and specific detection of different targets, including nucleic acid (miR-21), biological small molecules (ATP), and enzymes (hOGG1), giving the detection limits of 0.96 pM, 8.6 μM, and 8.3 × 10-5 U/mL, respectively. Thanks to the low background, these biosensors are demonstrated to work well for the accurate imaging analysis of different biomolecules in live cells. Moreover, we also demonstrate that these sensing systems can be easily combined with lateral flow assay (LFA), thus holding great potential in point-of-care testing, especially in poorly equipped or nonlaboratory environments.

CRISPR/Cas12a-based fluorescence aptasensor integrated with two-dimensional cobalt oxyhydroxide nanosheets for IFN-γ detection

Cytokine storm (CS) is a risky immune overreaction accompanied by significant elevations of pro-inflammatory cytokines including interferon-γ (IFN-γ), interleukin and tumor necrosis factor. Sensitive detection of cytokine is conducive to studying CS progress and diagnosing infectious diseases. In this study, we developed a tandem system combining aptamer, strand displacement amplification (SDA), CRISPR/Cas12a, and cobalt oxyhydroxide nanosheets (termed Apt-SCN tandem system) as a signal-amplified platform for IFN-γ detection. Owing to the stronger affinity, target IFN-γ bound specifically to the aptamer from aptamer-complementary DNA (Apt-cDNA) duplex. The cDNA released from the Apt-cDNA duplex initiated SDA, resulting in the generation of double-stranded DNA products that could activate the trans-cleavage activity of CRISPR/Cas12a. The activated CRISPR/Cas12a further cleaved FAM-labeled single-stranded DNA probe, preventing it from adhering to the cobalt oxyhydroxide nanosheets and recovering the fluorescence signal. Sensitive fluorometric analysis of IFN-γ was successfully performed with detection limit as low as 0.37 nM. Unlike traditional protein analysis methods, Apt-SCN tandem system incorporates multiple signal amplification techniques and may also be applicable for other cytokines assay. This study was the initial study to utilize SDA and CRISPR/Cas12a to detect IFN-γ, showing great potential for cytokines clinical assay and CS prevention.

Sensitive and Direct Analysis of Pseudomonas aeruginosa through Self-Primer-Assisted Chain Extension and CRISPR-Cas12a-Based Color Reaction

Pseudomonas aeruginosa (P. aeruginosa) is a common opportunistic Gram-negative pathogen that may cause infections to immunocompromised patients. However, sensitive and reliable analysis of P. aeruginosa remains a huge challenge. In this method, target recognition assists the formation of a self-primer and initiates single-stranded chain production. The produced single-stranded DNA chain is identified by CRISPR-Cas12a, and consequently, the trans-cleavage activity of the Cas12a enzyme is activated to parallelly digest Ag+ aptamer sequences that are chelated with silver ions (Ag+). The released Ag+ reacted with 3,3',5,5'-tetramethylbenzidine (TMB) for coloring. Compared with the traditional color developing strategies, which mainly rely on the DNA hybridization, the color developing strategy in this approach exhibits a higher efficiency due to the robust trans-cleavage activity of the Cas12a enzyme. Consequently, the method shows a low limit of detection of a wide detection of 5 orders of magnitudes and a low limit of detection of 21 cfu/mL, holding a promising prospect in early diagnosis of infections. Herein, we develop a sensitive and reliable method for direct and colorimetric detection of P. aeruginosa by integrating self-primer-assisted chain production and CRISPR-Cas12a-based color reaction and believe that the established approach will facilitate the development of bacteria-analyzing sensors.

A Critical Study on DNA Probes Attached to Microplate for CRISPR/Cas12 Trans-Cleavage Activity

CRISPR/Cas12-based biosensors are emerging tools for diagnostics. However, their application of heterogeneous formats needs the efficient detection of Cas12 activity. We investigated DNA probes attached to the microplate surface and cleaved by Cas12a. Single-stranded (ss) DNA probes (19 variants) and combined probes with double-stranded (ds) and ssDNA parts (eight variants) were compared. The cleavage efficiency of dsDNA-probes demonstrated a bell-shaped dependence on their length, with a cleavage maximum of 50%. On the other hand, the cleavage efficiency of ssDNA probes increased monotonously, reaching 70%. The most effective ssDNA probes were integrated with fluorescein, antibodies, and peroxidase conjugates as reporters for fluorescent, lateral flow, and chemiluminescent detection. Long ssDNA probes (120-145 nt) proved the best for detecting Cas12a trans-activity for all of the tested variants. We proposed a test system for the detection of the nucleocapsid (N) gene of SARS-CoV-2 based on Cas12 and the ssDNA-probe attached to the microplate surface; its fluorescent limit of detection was 0.86 nM. Being united with pre-amplification using recombinase polymerase, the system reached a detection limit of 0.01 fM, thus confirming the effectiveness of the chosen ssDNA probe for Cas12-based biosensors.

Regulating the trans-Cleavage Activity of CRISPR/Cas12a by Using an Elongation-Caged Single-Stranded DNA Activator and the Biosensing Applications

The CRISPR/Cas12a system exhibits extraordinary capability in the field of biosensing and molecular diagnosis due to its trans-cleavage ability. However, it is still desirable for precise control and programmable regulation of Cas12a trans-cleavage activity to promote the in-depth studies and application expansion of Cas12a-based sensing platforms. In this work, we have developed a new and robust CRISPR/Cas12a regulation mechanism by endowing the activator with the function of caging crRNA ingeniously. Specifically, we constructed an integrated elongation-caged activator (EL-activator) by extending the ssDNA activator on the 3'-end. We found that appending only about 8 nt that is complementary to the crRNA repeat region is enough to cage the crRNA spacer/repeat region, thus effectively inhibiting Cas12a trans-cleavage activity. The inner inhibition mechanism was further uncovered after a thorough investigation, demonstrating that the EL-activator works by impeding the conformation of crRNA required for Cas12a recognition and destroying its affinity with Cas12a. By further switching on the elongated moiety on the EL-activator using target biomarkers, the blocked trans-cleavage activity of Cas12a can be rapidly recovered. Finally, a versatile sensing platform was established based on the EL-activator regulation mechanism, expanding the conventional Cas12a system that only directly recognizes DNA to the direct detection of enzymes and RNA biomarkers. This work has enriched the CRISPR/Cas12a regulation toolbox and expanded its sensing applications.

Construction of a SERS platform for sensitive detection of aflatoxin B1 based on CRISPR strategy

Aflatoxin B1, a pathogen in the aflatoxin family, has attracted much attention due to the harmfulness in production and life. However, the common methods like high performance liquid chromatography used for detection of AFB1 have deficiency in complicated pretreatment processes, and the purification effect is not ideal. Herein, a SERS platform based on CRISPR strategy was designed for sensitive detection of AFB1. By synthesizing core-shell nanoparticles embedded with Raman silent region dye molecules, Prussian blue (PB), the detection of the sensor reduced background interference and the SERS signal was calibrated. At the same time, the high-efficiency reverse cleavage activity of cas12a was used to convert non-nucleic acid targets into nucleic acid, so as to achieve the effect of sensitive detection of AFB1 with a detection limit of 3.55  pg/mL. This study provides a new thought for SERS detection of non-nucleic acid targets in the future.

Light-Driven and Metal-Organic Framework Synergetic Loaded DNA Tetrahedral Amplifier for Exonuclease III-Powered All-in-One Biosensing and Chemotherapy in Live Biosystems

As a result of inaccurate biosensing and difficult synergetic loading, it is challenging to further impel DNA amplifiers to perform therapeutic application. Herein, we introduce some innovative solutions. First, a smart light-driven biosensing concept based on embedding nucleic acid modules with a simple photocleavage-linker is proposed. In this system, the target identification component is exposed on irradiation with ultraviolet light, thus avoiding an always-on biosensing response during biological delivery. Further, in addition to providing controlled spatiotemporal behavior and precise biosensing information, a metal-organic framework is used for the synergetic loading of doxorubicin in the internal pores, whereafter a rigid DNA tetrahedron-sustained exonuclease III-powered biosensing system is attached to prevent drug leakage and enhance resistance to enzymatic degradation. By selecting a next-generation breast cancer correlative noncoding microRNA biomarker (miRNA-21) as a model low-abundance analyte, a highly sensitive in vitro detection ability even allowing to distinguish single-base mismatching is demonstrated. Moreover, the all-in-one DNA amplifier shows excellent bioimaging competence and good chemotherapy efficacy in live biosystems. These findings will drive research into the use of DNA amplifiers in diagnosis and therapy integrated fields.

Comparison of Single-Stranded DNA Probes Conjugated with Magnetic Particles for Trans-Cleavage in Cas12a-Based Biosensors

Biosensors based on endonuclease Cas12 provide high specificity in pathogen detection. Sensitive detection using Cas12-based assays can be achieved using trans-cleaved DNA probes attached to simply separated carriers, such as magnetic particles (MPs). The aim of this work was to compare polyA, polyC, and polyT single-stranded (ss) DNA with different lengths (from 10 to 145 nt) as trans-target probes were immobilized on streptavidin-covered MPs. Each ssDNA probe was labeled using fluorescein (5') and biotin (3'). To compare the probes, we used guide RNAs that were programmed for the recognition of two bacterial pathogens: Dickeya solani (causing blackleg and soft rot) and Erwinia amylovora (causing fire blight). The Cas12 was activated by targeting double-stranded DNA fragments of D. solani or E. amylovora and cleaved the MP-ssDNA conjugates. The considered probes demonstrated basically different dependencies in terms of cleavage efficiency. PolyC was the most effective probe when compared to polyA or polyT probes of the same length. The minimal acceptable length for the cleavage follows the row: polyC < polyT < polyA. The efficiencies of polyC and polyT probes with optimal length were proven for the DNA targets' detection of D. solani and E. amylovora. The regularities found can be used in Cas12a-based detection of viruses, bacteria, and other DNA/RNA-containing analytes.

Gold Nanomaterials-Implemented CRISPR-Cas Systems for Biosensing

Due to their superiority in the simple design and precise targeting, clustered regularly interspaced short palindromic repeats (CRISPR)-Cas systems have attracted significant interest for biosensing. On the one hand, CRISPR-Cas systems have the capacity to precisely recognize and cleave specific DNA and RNA sequences. On the other hand, CRISPR-Cas systems such as orthologs of Cas9, Cas12, and Cas13 exhibit cis-cleavage or trans-cleavage activities after recognizing the target sequence. Owing to the cleavage activities, CRISPR-Cas systems can be designed for biosensing by degrading tagged nucleic acids to produce detectable signals. To meet the requirements of point-of-care detection and versatile signal readouts, gold nanomaterials with excellent properties such as high extinction coefficients, easy surface functionalization, and biocompatibility are implemented in CRISPR-Cas-based biosensors. In combination with gold nanomaterials such as gold nanoparticles, gold nanorods, and gold nanostars, great efforts are devoted to fabricating CRISPR-Cas-based biosensors for the detection of diverse targets. This review focuses on the current advances in gold nanomaterials-implemented CRISPR-Cas-based biosensors, particularly the working mechanism and the performance of these biosensors. CRISPR-Cas systems, including CRISPR-Cas9, CRISPR-Cas12a, and CRISPR-Cas13a are discussed and highlighted. Meanwhile, prospects and challenges are also discussed in the design of biosensing strategies based on gold nanomaterials and CRISPR-Cas systems.

Construction of molecular logic gates using heavy metal ions as inputs based on catalytic hairpin assembly and CRISPR-Cas12a

We successfully constructed several molecular logic gates using heavy metal ions as inputs based on catalytic hairpin assembly (CHA) and CRISPR-Cas12a. The corresponding DNAzymes were used to recognize heavy metal ions (Hg²⁺, Cd²⁺, Pb²⁺, and Mn²⁺). The specific cleavage between heavy metal ions and DNAzymes leads to the release of the trigger DNA, which can be used to activate CHA through logic computation. The CHA-generated DNA duplexes contain the protospacer adjacent motifs (PAM) sequence, which can be distinguished by CRISPR-Cas12a. The hybridization interactions between the duplexes and gRNA will activate the trans-cleavage capability of Cas12a, which can cleave the single-stranded DNA (ssDNA) reporter. The separation of the fluorescence group and quench group in ssDNA will generate a high fluorescence signal for readout. Using Hg²⁺ and Cd²⁺ as the two inputs, several basic logic gates were constructed, including OR, AND, and INHIBT. Using Hg²⁺, Cd²⁺, Pb²⁺, and Mn²⁺ as the four inputs, cascaded logic gates were further fabricated. With the advantages of scalability, versatility, and logic computing capability, our proposed molecular logic gates can provide an intelligent sensing system for heavy metal ions monitoring.

Bioactive inorganic nanomaterials for cancer theranostics

Bioactive materials are a special class of biomaterials that can react in vivo to induce a biological response or regulate biological functions, thus achieving a better curative effect than traditional inert biomaterials. For cancer theranostics, compared with organic or polymer nanomaterials, inorganic nanomaterials possess unique physical and chemical properties, have stronger mechanical stability on the basis of maintaining certain bioactivity, and are easy to be compounded with various carriers (polymer carriers, biological carriers, etc.), so as to achieve specific antitumor efficacy. After entering the nanoscale, due to the nano-size effect, high specific surface area and special nanostructures, inorganic nanomaterials exhibit unique biological effects, which significantly influence the interaction with biological organisms. Therefore, the research and applications of bioactive inorganic nanomaterials in cancer theranostics have attracted wide attention. In this review, we mainly summarize the recent progress of bioactive inorganic nanomaterials in cancer theranostics, and also introduce the definition, synthesis and modification strategies of bioactive inorganic nanomaterials. Thereafter, the applications of bioactive inorganic nanomaterials in tumor imaging and antitumor therapy, including tumor microenvironment (TME) regulation, catalytic therapy, gas therapy, regulatory cell death and immunotherapy, are discussed. Finally, the biosafety and challenges of bioactive inorganic nanomaterials are also mentioned, and their future development opportunities are prospected. This review highlights the bioapplication of bioactive inorganic nanomaterials.

CRISPR/Cas-Based MicroRNA Biosensors

As important post-transcriptional regulators, microRNAs (miRNAs) play irreplaceable roles in diverse cellular functions. Dysregulated miRNA expression is implicated in various diseases including cancers, and thus miRNAs have become the valuable biomarkers for disease monitoring. Recently, clustered regularly interspaced short palindromic repeats/CRISPR-associated (CRISPR/Cas) system has shown great promise for the development of next-generation biosensors because of its precise localization capability, good fidelity, and high cleavage activity. Herein, we review recent advance in development of CRISPR/Cas-based biosensors for miRNA detection. We summarize the principles, features, and performance of these miRNA biosensors, and further highlight the remaining challenges and future directions.

Imaging the unimaginable: leveraging signal generation of CRISPR-Cas for sensitive genome imaging

Fluorescence in situ hybridization (FISH) is the gold standard for visualizing genomic DNA in fixed cells and tissues, but it is incompatible with live-cell imaging, and its combination with RNA imaging is challenging. Consequently, due to its capacity to bind double-stranded DNA (dsDNA) and design flexibility, the clustered regularly interspaced short palindromic repeats (CRISPR)-CRISPR-associated protein 9 (CRISPR-Cas9) technology has sparked enormous interest over the past decade. In this review, we describe various nucleic acid (NA)- and protein-based (amplified) signal generation methods that achieve imaging of repetitive and single-copy sequences, and even single-nucleotide variants (SNVs), next to highly multiplexed as well as dynamic imaging in live cells. With future progress in the field, the CRISPR-(d)Cas9-based technology promises to break through as a next-generation cell-imaging technique.

CRISPR/Cas9-based coronal nanostructures for targeted mitochondria single molecule imaging

The biological state at the subcellular level is highly relevant to many diseases, and the monitoring of organelles such as mitochondria is crucial based on this. However, most DNA and protein based nanoprobes used for the detection of mitochondrial RNAs (mitomiRs) lack spatial selectivity, which leads to inefficiencies in probe delivery and signal turn-on. Herein, we constructed a novel DNA nanoprobe named protein delivery nano-corona (PDNC) to improve the delivery efficiency of Cas protein, for spatially selective imaging of mitomiRs in living cells switched on by a CRISPR/Cas system. Combined with a single-molecule counting method, this strategy enables highly sensitive detection of low-abundance mitomiR. Therefore, the strategy in this work opens up new opportunities for cell identification, early clinical diagnosis, and research in biological behaviour at the subcellular level.

Direct visualization of living bacterial genotypes using CRISPR/Cas12a-circular reporter nanoprobes

Bacterial genotyping is important for understanding the complex microbiota. Although fluorescence in situ hybridization (FISH) has enabled bacterial community identification with high spatial resolution, its unavoidable cell fixation steps and signal generation by multi-probe stacking greatly limit its application in living bacterial genotyping. Here, we designed polyethyleneimine-encapsulated CRISPR/Cas12a-circular reporter nanoprobes (CasCLR) for rapid and sensitive visualization of gene information in living bacteria. We found that, nanoprobe-based sequential delivery of Cas12a/crRNA and circular reporter into bacteria allowed single genomic loci to initiate trans-cleavage activity of Cas12a, thereby cleaving CLR to generate amplified fluorescent signals for imaging of target gene. Using CasCLR, we can sensitively analyze the percentage of target bacteria in co-culture experiments and directly detect pathogenic bacteria in uncultured mouse gut microbe. In addition, CasCLR has the ability to sensitively analyze specific genotype of microbial communities in vivo. This nanobiotechnology-based bacterial gene analysis is expected to advance understanding of in vivo bacterial cytogenetic information.

Highly sensitive monitoring of telomerase activity in living cells based on rapidly triggered cascade amplification reaction

Telomerase is an important potential biomarker for the study of tumor progression. Herein, we designed a cascade-amplification-reaction-based nanoprobe for intracellular telomerase detection based on the integration of rolling circle amplification (RCA) and catalytic hairpin assembly (CHA) onto MnO₂ nanosheets. Firstly, MnO₂ nanosheets rapidly delivered and released signal amplification units into cells, and very short telomerase extension products formed RCA circular templates and initiated the exponential RCA, producing enriched telomere sequence amplification products. Then the amplification products specifically triggered the CHA process and numerous H1/H2 complexes were formed, realizing the exponential amplification of fluorescence signals. The detection limit is as low as 1 LoVo cell for telomerase activity in cell extract. We further designed a microfluidic chip with six independent cell culture regions for in situ fluorescence imaging. Simultaneous detection of six types of cells was realized on the chip, and only 1-2 μL of cell suspension and reagents are needed. Our detection method features faster response speed and stronger fluorescence signal. Telomerase in living cells showed strong fluorescence signal within 1.5 h, and tumor cells were effectively distinguished from normal cells. Telomerase activities of different types of tumor cells and activity changes were both monitored conveniently. These results demonstrate that this method holds the potential for the sensitive detection of low abundance biomarkers in living cells, and will contribute to cancer diagnosis, cancer treatment and telomerase-related drug screening.

Ratiometric fluorescent probe: a sensitive and reliable reporter for the CRISPR/Cas12a-based biosensing platform

Using a ratiometric probe as the reporter for the CRISPR-Cas12a based biosensing system, the change of two fluorescence intensities can be monitored, while the TaqMan probe appears only one signal.