A portable europium complex-loaded fluorescent test paper combined with smartphone analysis for the on-site and visual detection of mancozeb in food samples

The on-site detection of mancozeb in food samples holds immense value for food safety. A red-fluorescent europium complex (Eu-PYDC-Phen) has been prepared and employed as a fluorescence probe for mancozeb detection. The optimized probe suspension exhibits excellent detection performances, including a wide linear range (0-0.24 mM), low detection limit (65 nM), rapid response (2 mins) and high selectivity. Moreover, a portable detection platform was carefully designed, integrating the Eu-PYDC-Phen-based fluorescent test strips with smartphone color recognition software. This innovative platform enables visual and on-site detection of mancozeb in tomato, apple, and lettuce, achieving satisfactory recovery rates (90.34 to 106.50%). Furthermore, the integration of machine learning techniques based on hierarchical clustering algorithm has the potential to further improve the prediction and decision-making efficiency in mancozeb detection. This work provides an economical, convenient, and reliable strategy for on-site detection of pesticide in agricultural products, thereby making a meaningful contribution to food safety.

Synthesis of organic solvent-free nitrogen-doped carbon quantum dots as unique green fluorimetric probes for analysis of abrocitinib in human plasma

Atopic dermatitis (AD) is a persistent, inflammatory skin condition that impacts approximately 15 to 20% of children and 1 to 3% of adults globally. Common skin manifestations include papules, papulovesicular, and brown or red patches with swelling, crusting, and flaking. Therefore, the drug abrocitinib (ABR) was approved by the US FDA as an oral treatment for atopic dermatitis. The present study outlines the development of innovative, thermostable, and pH-stable organic solvent-free nitrogen-doped carbon dots (N@CQDs) synthesized through a one-step method for evaluating ABR with a notable quantum yield of 33.84% to minimize the use of organic solvents. Their cost-effectiveness, eco-friendly characteristics, and outstanding photocatalytic properties have established them as a promising alternative to conventional luminescent techniques like fluorescent dyes and luminous derivatization technique. The reaction of ABR with N@CQDs led to a significant decrease in the luminescent response of the produced green and stable carbon quantum dots at 513 nm. The detection range was determined to be 1.0-150.0 ng mL-1, with a lower limit of quantitation (LOQ) equal to 0.52 ng mL-1 based on the linear graph. The green method effectively used for analysis of ABR in pharmaceutical tablets and pharmacokinetic study with high sensitivity.

Microwave Synthesis of Carbon Quantum Dots from Arabica Coffee Ground for Fluorescence Detection of Fe3+, Pb2+, and Cr3

In this study, carbon quantum dots (CQDs), which were synthesized from arabica coffee ground-derived activated carbon, have been successfully employed as a fluorescence sensor to detect Fe3+ ions. CQDs were fabricated using microwave heating for 5-10 min, which emitted vibrant blue light at 455 nm when exposed to excitation at 365 nm. Dynamic light scattering (DLS) analysis revealed that the average size of CQDs was 10.12 nm with a quantum yield of 6.01%. Fluorescence detection was developed for sensing Fe3+, Pb2+, and Cr3+ ions. The addition of the three metal ions resulted in a decrease in the fluorescence (FL) intensity of the CQDs, with the addition of Fe3+ ions demonstrating a more significant decrease in FL compared to the addition of both Cr3+ and Pb2+ ions. The results indicated that the CQDs synthesized from activated carbon of arabica coffee waste performed as a selective fluorescent detector for Fe3+ ions, with a detection limit of 0.27 μM.

Ratiometric fluorescence and absorbance dual-model immunoassay based on 2,3-diaminophenazine and carbon dots for detecting Aflatoxin B1

In this work, a dual-model immunoassay for detecting Aflatoxin B1 (AFB1) was developed based on 2,3-diaminophenazine (DAP) and carbon dots (CDs). Under the catalysis of horseradish peroxidase (HRP), the o-phthalylenediamine (OPD) was oxidized to DAP which had a yellow color and intense fluorescence. The color changes form colorless to yellow was used to design absorbance model immunoassay. Meanwhile, the absorption spectrum of DAP overlapped with the emission spectrum of CDs which caused the fluorescence of CDs to be quenched. The fluorescence changes of DAP and CDs were used to develop ratiometric fluorescence immunoassay. The dual-model immunoassay showed excellent sensitivity with the limits of detection (LODs) of 0.013 ng/mL for fluorescence mode and 0.062 ng/mL for absorbance mode. Meanwhile, both models exhibited great selectivity for AFB1. Additionally, the recovery rates suggested the proposed dual-model immunoassay had great potential in actual samples detection.

Development of Fluorescent Co (II)-Integrated Carbon Dots and Their Application as a Off-On Mesotrione Detection Sensor

A very simple mesotrione-sensing medium with enhanced sensitivity detection limits has been proposed. A renovated hydrothermal method was adopted for synthesizing fluorescent carbon dots from ethylenediamine and glucose using a Teflon-lined simple autoclave in a GC oven. The resultant carbon dots were characterized via TEM, FTIR, UV-vis, particle size distribution, and EDX and evaluated in a fluorimeter as the sensing medium for mesotrione detection. The binding approach of the Co (II)-integrated glucose-bound carbon dots toward mesotrione is selective, making them an effective sensor for the real sample applications, where majority of the coexisting substances showed insignificant interference effect. Formation of the metastable state due to the molecular interaction between carbon dots and Co (II) resulted in fluorescence quenching at 456 nm. Enhancement in the fluorescence intensity occurred when mesotrione was added in the concentration range of 0.2-5.0 μg mL-1, with a limit of detection, limit of quantification, standard deviation, and relative standard deviation of 0.054, 0.164, 0.00082 μg mL-1, and 0.682%, respectively. Mesotrione determination was demonstrated in soil, water, and tomato samples with recoveries in the range of 95.38-104.7%. The selectivity of the sensor was found to be good enough when checked for the complex tomato sample spiked with different pesticides of the triketone family having structural similarities to mesotrione.

A comparative study of green solid contact ion selective electrodes for the potentiometric determination of Letrozole in dosage form and human plasma

Analysis of drugs clinically and their identification in biological samples are of utmost importance in the process of therapeutic drug monitoring, also in pharmacokinetic investigations and tracking of illicit medications. These investigations are carried out using a variety of analytical methods, including potentiometric electrodes. Potentiometric electrodes are a wonderful solution for researchers because they outperform other methods in terms of sustainability, greenness, and cost effectiveness. In the current study, ion-selective potentiometric sensors were assembled for the aim of quantification of the anticancer drug Letrozole (LTZ). The first step was fabrication of a conventional sensor based on the formation of stable host-guest inclusion complex between the cationic drug and 4-tert-butylcalix-8-arene (TBCAX-8). Two additional sensors were prepared through membrane modification with graphene nanocomposite (GNC) and polyaniline (PANI) nanoparticles. Linear responses of 1.00 × 10-5-1.00 × 10-2, 1.00 × 10-6-1.00 × 10-2 and 1.00 × 10-8-1.00 × 10-3 with sub-Nernstian slopes of 19.90, 20.10 and 20.30 mV/decade were obtained for TBCAX-8, GNC, and PANI sensors; respectively. The developed sensors were successful in determining the drug LTZ in bulk powder and dosage form. PANI modified sensor was used to determine LTZ in human plasma with recoveries ranging from 88.00 to 96.30%. IUPAC recommendations were followed during the evaluation of the electrical performance of the developed sensors. Experimental conditions as temperature and pH were studied and optimized. Analytical Eco-scale and Analytical GREEness metric were adopted as the method greenness assessment tools.

Simple and green approach for photoluminescent carbon dots prepared from faba bean seeds as a luminescent probe for determination of Hg+ ions and cell imaging

In this research, for the first time, a dedicated sensor was designed to detect Hg+ ions using photoluminescent carbon dots (CDs). Due to the preferred green synthesis of CDs from bio-resources, carbohydrate-rich faba bean seeds as a potential carbon precursor were applied to the synthesis of CDs. The CDs were prepared from the faba bean seeds using the hydrothermal method in an aqueous solution in the absence of substances such as an acid or base and any other additives. The synthesized CDs exhibited maximum emission intensity at 387 nm when excited at 310 nm and their luminescence quantum yield was calculated to be ~5.94%. Then, the fluorescence emission of CDs was examined in the presence of different metal ions. Results revealed that the CDs had good selectivity towards the Hg+ ions, so the fluorescence emission was significantly changed in the presence of these ions with a limit of detection (LOD) as low as 0.35 μM. Furthermore, because of their very low cytotoxicity, these CDs can be applied for cell imaging.

Pure and doped carbon quantum dots as fluorescent probes for the detection of phenol compounds and antibiotics in aquariums

The resulting antibiotic residue and organic chemicals from continuous climatic change, urbanization and increasing food demand have a detrimental impact on environmental and human health protection. So, we created a unique B, N-CQDs (Boron, Nitrogen doping carbon quantum dots) based fluorescent nanosensor to investigate novel sensing methodologies for the precise and concentrated identification of antibiotics and phenol derivatives substances to ensure that they are included in the permitted percentages. The as-prepared highly fluorescent B, N-CQDs had a limited range of sizes between 1 and 6 nm and average sizes of 2.5 nm in our study. The novel B, N-CQDs showed high sensitivity and selectivity for phenolic derivatives such as hydroquinone, resorcinol, and para aminophenol, as well as organic solvents such as hexane, with low detection limits of 0.05, 0.024, 0.032 and 0.013 µM respectively in an aqueous medium. The high fluorescence B, N-CQDs probes were examined using transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and UV/VIS spectroscopy. The outcomes were compared to carbon quantum dots (CQDs) previously generated from Urea.

Carbon quantum dots for fluorescent detection of nitrite: A review

NO₂^- is commonly found in foods and the environment, and excessive intake of NO₂^- poses serious hazards to human health. Thus, rapid and accurate assay of NO₂^- is of considerable significance. Traditional instrumental approaches for detection of NO₂^- faced with limitations of expensive instruments and complicated operations. Current gold standards for sensing NO₂^- are Griess assay and 2,3-diaminonaphthalene assay, which suffer from slow detection kinetics and bad water solubility. The newly emerged carbon quantum dots (CQDs) exhibit integrated merits including easy fabrication, low-cost, high quantum yield, excellent photostability, tunable emission behavior, good water solubility and low toxicity, which make CQDs be widely applied to fluorescent assay of NO₂^-. In this review, synthetic strategies of CQDs are briefly presented. Advances of CQDs for fluorescent detection of NO₂^- are systematically highlighted. Lastly, the challenges and perspectives in the field are discussed.

Fluorescence "Turn OFF-ON" detection of Fe3+ and propiconazole pesticide using blue emissive carbon dots from lemon peel

In this study, water-soluble carbon dots (CDs) were employed as a novel fluorescence "turn OFF-ON" sensor to detect Fe³⁺ ions in pharmaceutical sample and propiconazole (PC) in food samples. Blue fluorescent "LPCDs" are synthesized from the lemon peel that exhibited emission at 468 nm when excited at 378 nm. The average size of the as-prepared LPCDs is 2.03 nm, displaying a quantum yield of 32 %. Fluorescence "turn OFF-ON" strategy was developed for sensing of Fe³⁺ ion and PC, demonstrating favorable linearity in the range of 0.5-180 μM and 0.1-40 μM with the detection limits of 0.18 μM and 0.054 μM for Fe³⁺ and PC, respectively. Further, LPCDs-loaded cellulose paper was used as visual reader to detect Fe³⁺ and PC. This approach was effectively applied to detect Fe³⁺ and PC in pharmaceutical and vegetable samples.

Nanomaterials for fluorescent assay of bilirubin

The accumulation of bilirubin in blood is associated with many diseases. Sensitive and accurate detection of bilirubin is of great significance for personal health care. The rapid development of fluorescent nanomaterials promotes rapid development in the bilirubin assay. In this review, traditional methods for detection of bilirubin are briefly presented to compare with fluorescent nanosensors. Subsequently, the recent progress of different types of fluorescent nanomaterials for determination of bilirubin is summarized. Further, the performance of fluorescent nanosensors and conventional techniques for sensing bilirubin are compared. To this end, the challenges and prospects concerning the topics are discussed. This review will provide some introductory knowledge for researchers to understand the status and importance of fluorescent nanosensors for sensing bilirubin.

Microwave synthesis of blue emissive carbon dots from 5-sulpho anthranilic acid and 1,5-diphenyl carbazide for sensing of levocetirizine and niflumic acid

In this work, water soluble carbon dots (CDs) were synthesized by using 5- sulpho anthranilic acid (SAA) and 1,5-diphenylycarbazide (DPC) as precursors via microwave-assisted method and named as "SD-CDs". We studied the effect of SAA and DPC molar ratio (1:3, 2:2 and 3:1) for the preparation of blue fluorescent CDs, showing the best emission properties at molar 3:1 ratio of SAA and DPC. The as-prepared SD-CDs emit bright blue color under UV light at 365 nm, and exhibit emission peak at 392 nm when excited at 319 nm. The as-synthesized SD-CDs act as a fluorescent sensor for detection of levocetirizine and niflumic acid through the fluorescence "turn-on-off" mechanism. The developed probe exhibited good linearity in the concentrations (levocetirizine - 1.0-100 µM and niflumic acid - 0.5-100 µM) with detection limits of 3.92 nM and 0.19 µM for levocetirizine and niflumic acid, respectively. Importantly, the developed analytical method was successfully used for the detection of levocetirizine in tablets and niflumic acid in biofluids of human (serum, plasma and urine), showing good recoveries from 97 to 99 %. Thus, this SD-CDs-based fluorescence method has the potential for levocetirizine and niflumic acid assays in biological and pharmaceutical samples.

Glutathione-ascorbic acid-functionalized molybdenum oxide quantum dots-based fluorescent sensor for the detection of isoniazid drug in pharmaceutical samples

Herein, glutathione-ascorbic acid-functionalized molybdenum oxide quantum dots (GSH-AA-MoO_x QDs) are synthesized by the conventional method and used as a fluorescent probe for the rapid detection of isoniazid drug in pharmaceutical samples. Ascorbic acid and glutathione are used as surface ligands for the modification of MoO_x QDs. The as-synthesized GSH-AA-MoO_x QDs display λ_Em at 416 nm when applied λ_Ex at 330 nm. The introduction of isoniazid drug into GSH-AA-MoO_x QDs solution results the assembly of GSH-AA-MoO_x QDs-isoniazid nanoarchitectures, leading to quench λ_Em at 416 nm. Thus, GSH-AA-MoO_x QDs can work as a fluorescent sensor for the rapid identification of isoniazid in real samples. The as-prepared GSH-AA-MoO_x QDs not only allows superior analytical features (rapidity, and selectivity) toward isoniazid with the detection limit of 94 nM, but also displays fluorescence "turn-off" response for assaying of isoniazid in real samples (pharmaceutical and biofluids). Finally, GSH-AA-MoO_x QDs are highly promising fluorescent probe for the rapid detection of isoniazid in real samples.

Pesticides monitoring in biological fluids: Mapping the gaps in analytical strategies

Pesticides play a key-role in the development of the agrifood sector allowing controlling pest growth and, thus, improving the production rates. Pesticides chemical stability is responsible of their persistency in environmental matrices leading to bioaccumulation in animal tissues and hazardous several effects on living organisms. The studies regarding long-term effects of pesticides exposure and their toxicity are still limited to few studies focusing on over-exposed populations, but no extensive dataset is currently available. Pesticides biomonitoring relies mainly on chromatographic techniques coupled with mass spectrometry, whose large-scale application is often limited by feasibility constraints (costs, time, etc.). On the contrary, chemical sensors allow rapid, in-situ screening. Several sensors were designed for the detection of pesticides in environmental matrices, but their application in biological fluids needs to be further explored. Aiming at contributing to the implementation of pesticides biomonitoring methods, we mapped the main gaps between screening and chromatographic methods. Our overview focuses on the recent advances (2016-2021) in analytical methods for the determination of commercial pesticides in human biological fluids and provides guidelines for their application.

Dual mode detection and sunlight-driven photocatalytic degradation of tetracycline with tailor-made N-doped carbon dots

Carbon dots have emerged as one of the most promising materials with various potential applications derived from their unique photophysical and chemical properties. The present work investigates the electrochemical and photochemical properties of one-pot synthesized carbon dots for environmental sustainability. Facile microwave-assisted pyrolysis of urea and glucose yielded nitrogen doped carbon dots (N-doped carbon dots) with blue fluorescence and a quantum yield of 14.9%. As synthesized N- doped carbon dot had intense fluorescence, stability, water solubility, and biocompatibility. In the sensing studies, N-doped carbon dots appeared as a dual sensor for drug tetracycline with excellent sensitivity and selectivity. Beyond sense, the carbon dots have the potential to act as a photocatalyst for the degradation of tetracycline. Further, N-doped carbon dot could bring exhaustive degradation of tetracycline (>95%) within 10 min in the absence of any additives. This is the first time report on the utilization of raw non-metal doped carbon dots as a photocatalyst for the degradation of tetracycline.

Advances in Ultra-small Fluorescence Nanoprobes for Detection of Metal Ions, Drugs, Pesticides and Biomarkers

Identification of trace level chemical species (drugs, pesticides, metal ions and biomarkers) plays key role in environmental monitoring. Recently, fluorescence assay has shown significant advances in detecting of trace level drugs, pesticides, metal ions and biomarkers in real samples. Ultra-small nanostructure materials (metal nanoclusters (NCs), quantum dots (QDs) and carbon dots (CDs)) have been integrated with fluorescence spectrometer for sensitive and selective analysis of trace level target analytes in various samples including environmental and biological samples. This review summarizes the properties of metal NCs and ligand chemistry for the fabrication of metal NCs. We also briefly summarized the synthetic routes for the preparation of QDs and CDs. Advances of ultra-small fluorescent nanosensors (NCs, QDs and CDs) for sensing of metal ions, drugs, pesticides and biomarkers in various sample matrices are briefly discussed. Additionally, we discuss the recent challenges and future perspectives of ultra-small materials as fluorescent sensors for assaying of wide variety of target analytes in real samples.

Facile Synthesis of Carbon Dots from Amido Black 10b for Sensing in Real Samples

Herein, a one-step hydrothermal synthesis method was adopted to fabricate carbon dots (CDs) from amido black 10b in a sodium hydroxide solution. The morphology and composition of the CDs were investigated by XRD, FTIR TEM, XPS, UV-vis, and fluorescence spectroscopy. The obtained CDs (AB-CDs) with an average diameter of 19.4 nm displayed a well-dispersed characteristic in aqueous solutions. The as-prepared CDs showed bright blue fluorescence and good photostability, with a high quantum yield of 24.1%. AB-CDs displayed a selective and noticeable turn-off response to Fe³⁺. Accordingly, the quantitative detection of Fe³⁺ was achieved in the range of 5-200 μmol L^-1 with a detection limit of 1.84 μmol L^-1. The fluorescence response mechanism of Fe³⁺ to AB-CDs was ascribed to static quenching due to the emergence of the ground-state complex. Moreover, ascorbic acid could restore the fluorescence of AB-CDs quenched by Fe³⁺ by reducing Fe³⁺ to Fe²⁺. The developed nanoprobe was used to detect ascorbic acid with a limit of detection of 7.26 μmol L^-1 in the range of 20-300 μmol L^-1. Furthermore, the developed sensing system was successfully applied for an Fe³⁺ assay in a lake water sample and ascorbic acid detection in a human urine sample. The AB-CD-based analytical system showed its latent practical value in the chemical analysis and bioanalytical fields.