Droplet digital recombinase polymerase amplification for multiplexed detection of human coronavirus

A novel triple signal amplification platform of peroxide test strip for sensitive detection of adenosine triphosphate

Peroxide test strip (PTS) has been widely used for the point-of-care testing (POCT), but its poor sensitivity is a big obstacle for analyzing trace target. Herein, a triple signal amplifying platform integrating the liposome enrichment, the hybridization chain reaction (HCR) circuit, and the image analysis method was constructed to enhance the visual readout of PTS for the sensitive detection of adenosine triphosphate (ATP), an important biomarker of food spoilage. In the presence of ATP, the HCR amplifier was firstly initiated on the surface of magnetic beads (MBs), inducing a large number of glucose oxidase (GOD) imbedded liposomes to be attached. After the magnetic separation, the linked liposomes were destroyed and the enriched GOD was released to react with glucose to produce H2O2, which can enhance the color change of PTS. Finally, an image analysis method was developed to further amplify the colorimetric difference of human visual perception of PTS readout. This triple signal amplification strategy was used to detect ATP in the linear range from 50 to 250 nmol/L, and the limit of detection (LOD, 3σ/k) was 0.65 nmol/L. Finally, this method has been successfully applied for accurate and sensitive detection of ATP in watermelon juice, showing its great potential for quick determining whether food is spoiled.

Split Probe-Induced Protein Translational Amplification for Nucleic Acid Detection

Nucleic acid detection is important in a wide range of applications, including disease diagnosis, genetic testing, biotechnological research, environmental monitoring, and forensic science. However, the application of nucleic acid detection in various fields is hindered by the lack of sensitive, accurate, and inexpensive methods. This study introduces a simple approach to enhance the sensitivity for the accurate detection of nucleic acids. Our approach combined a split-probe strategy with in vitro translational amplification of reporter protein for signal generation to detect nucleic acids with high sensitivity and selectivity. This approach enables target-mediated translational amplification of reporter proteins by linking split probes in the presence of a target microRNA (miRNA). In particular, the fluorescence split-probe sensor adopts a reporter protein with various fluorescence wavelength regions, enabling the simultaneous detection of multiple target miRNAs. Moreover, luminescence detection by merely altering the reporter protein sequence can substantially enhance the sensitivity of detection of target miRNAs. Using this system, we analyzed and quantified target miRNAs in the total RNA extracted from cell lines and cell-derived extracellular vesicles with high specificity and accuracy. This split-probe sensor has potential as a powerful tool for the simple, sensitive, and specific detection of various target nucleic acids.

Recent developments in isothermal amplification technology for rapid detection of SARS-CoV-2

Coronavirus disease 2019 (COVID-19), an infectious disease caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has spread globally, posing a significant threat to human health. Rapid and accurate detection of infectious disease pathogens is of crucial practical significance for early screening, timely intervention, and outbreak prevention. However, conventional diagnostic methods are increasingly unable to meet clinical demands. Recently developed isothermal analysis methods offer mild reaction conditions and reduce dependence on specialized instruments. These convenient, fast, and reliable methods show great promise for diagnosing infectious pathogens, especially for on-site detection in areas without laboratories or with limited resources. Among them, loop-mediated isothermal amplification (LAMP) and recombinase polymerase amplification (RPA), which integrate various widely used detection techniques, stand out as rapidly advancing and relatively mature isothermal nucleic acid amplification technologies. This review outlines several representative isothermal amplification technologies and associated detection methods. We summarize the latest advancements in LAMP and RPA technologies for the rapid detection of SARS-CoV-2 and discuss the future prospects of isothermal amplification in diversified testing.

FIND-seq: high-throughput nucleic acid cytometry for rare single-cell transcriptomics

Rare cells have an important role in development and disease, and methods for isolating and studying cell subsets are therefore an essential part of biology research. Such methods traditionally rely on labeled antibodies targeted to cell surface proteins, but large public databases and sophisticated computational approaches increasingly define cell subsets on the basis of genomic, epigenomic and transcriptomic sequencing data. Methods for isolating cells on the basis of nucleic acid sequences powerfully complement these approaches by providing experimental access to cell subsets discovered in cell atlases, as well as those that cannot be otherwise isolated, including cells infected with pathogens, with specific DNA mutations or with unique transcriptional or splicing signatures. We recently developed a nucleic acid cytometry platform called 'focused interrogation of cells by nucleic acid detection and sequencing' (FIND-seq), capable of isolating rare cells on the basis of RNA or DNA markers, followed by bulk or single-cell transcriptomic analysis. This platform has previously been used to characterize the splicing-dependent activation of the transcription factor XBP1 in astrocytes and HIV persistence in memory CD4 T cells from people on long-term antiretroviral therapy. Here, we outline the molecular and microfluidic steps involved in performing FIND-seq, including protocol updates that allow detection and whole transcriptome sequencing of rare HIV-infected cells that harbor genetically intact virus genomes. FIND-seq requires knowledge of microfluidics, optics and molecular biology. We expect that FIND-seq, and this comprehensive protocol, will enable mechanistic studies of rare HIV+ cells, as well as other cell subsets that were previously difficult to recover and sequence.

Simultaneous detection of multiple aging characteristic components in oil-paper insulation using sensitive Raman technology and microfluidics

The aging characteristic components of oil-paper insulation reflect the aging status of the power equipment. In this study, we designed a novel microfluidic chip capable of automatic and rapid extraction of aging components from insulating oil. Combined with Raman spectroscopy technology, it enables simultaneous detection of various aging components. By optimizing the microfluidic chip structural and adopting an optical window encapsulation, it eliminates interference from the Polydimethylsiloxane (PDMS). Measurements and analyses were carried out on multiple oil samples containing three aging products (furfural, acetone, and methanol). The results indicate that this novel microfluidic chip facilitates simultaneous detection of multiple components, significantly improving the detection sensitivity of complex oil. The detection limits for furfural, acetone, and methanol in insulating oil are 0.43 mg/L, 1.04 mg/L, and 2.31 mg/L, respectively. This provides a new approach for the online detection of oil-paper insulation equipment.

Development of two novel on-site detection visualization methods for murine hepatitis virus based on the multienzyme isothermal rapid amplification

Murine hepatitis virus (MHV) infection is one of the most prevalent types of mice infection in laboratory. MHV could cause death in mice and even interfere with the results in animal experiments. Herein, we developed two isothermal approaches based on the Multienzyme Isothermal Rapid Amplification (MIRA), for rapid detection of MHV in conserved M gene. We designed and screened several pairs of primers and probes and the isothermal fluorescence detector was applied for the exonuclease Ⅲ reverse transcription MIRA (exo-RT-MIRA) assay. To further simplify the workflow, the portable fluorescence visualization instrument, also as a palm-sized handheld system, was used for the naked-eye exo-RT-MIRA assay. The amplification temperature and time were optimized. The assay could be processed well at 42 °C 20 min for the exo-RT-MIRA and the naked-eye exo-RT-MIRA assay. The limit of detection (LoD) of the exo-RT-MIRA assay was 43.4 copies/μL. The LoD of the naked-eye exo-RT-MIRA assay was 68.2 copies/μL. No nonspecific amplifications were observed in the two assays. A total of 107 specimens were examined by qPCR and two assays developed. The experimental results statistical analysis demonstrated that the exo-RT-MIRA assay with the qPCR yielded sufficient agreement with a kappa value of 1.000 (p < 0.0001). The results also exhibited a good agreement (kappa value, 0.961) (p < 0.0001) between the naked-eye exo-RT-MIRA assay and the qPCR assay. In our study, the exo-RT-MIRA assay and the naked-eye exo-RT-MIRA assay presented the possibility of new methods in MHV point-of-testing diagnosis.

Droplet digital molecular beacon-LAMP assay via pico-injection for ultrasensitive detection of pathogens

A pico-injection-aided digital droplet detection platform is presented that integrates loop-mediated isothermal amplification (LAMP) with molecular beacons (MBs) for the ultrasensitive and quantitative identification of pathogens, leveraging the sequence-specific detection capabilities of MBs. The microfluidic device contained three distinct functional units including droplet generation, pico-injection, and droplet counting. Utilizing a pico-injector, MBs are introduced into each droplet to specifically identify LAMP amplification products, thereby overcoming issues related to temperature incompatibility. Our methodology has been validated through the quantitative detection of Escherichia coli, achieving a detection limit as low as 9 copies/μL in a model plasmid containing the malB gene and 3 CFU/μL in a spiked milk sample. The total analysis time was less than 1.5 h. The sensitivity and robustness of this platform further demonstrated the potential for rapid pathogen detection and diagnosis, particularly when integrated with cutting-edge microfluidic technologies.

A dual RPA-LFD assay for the simultaneous detection of Salmonella typhimurium and Salmonella enteritidis

Introduction: Salmonella was one of the most common bacteria that caused foodborne illness, with S. typhimurium (Salmonella typhimurium) and S. enteritidis (Salmonella enteritidis) infections accounting for more than 75% of human salmonella infections. Methods: In this study, we developed a method of dual recombinase polymerase amplification (RPA) combined with a lateral flow dipstick for the rapid detection of S. typhimurium and S. enteritidis in clinical specimens (stool). Results: The entire reaction process, including amplification and result reading, could be completed within 65 min. The detection limits of S. typhimurium and S. enteritidis in pure culture samples were 5.23 × 101 CFU/mL and 3.59 × 101 CFU/mL, respectively. The detection limits of S. typhimurium and S. enteritidis in artificially contaminated samples were 8.30 × 101 CFU/mL and 2.70 × 102 CFU/mL, respectively. In addition, the method had no cross-reaction with other pathogenic microorganisms. The results in clinical samples were fully consistent with those obtained using Bacterial Analysis Manual, with sensitivity and specificity were 100% (8/8) and 100% (17/17) for S. typhimurium and 100% (4/4) and 100% (21/21) for S. enteritidis, respectively. Discussion: The detection limits of S. typhimurium and S. enteritidis in artificially contaminated samples were higher than those in pure culture samples, which might be attributed to the inherent complex composition of artificially contaminated samples. In addition, the detection limits of S. typhimurium and S. enteritidis in the same sample were also different, which might be attributed to different amplification efficiency of two target genes in the same reaction system. Conclusion: This assay had potential application outdoors, as it could be performed within 1 h at 38°C without a complex instrument, and the results could be observed with the naked eye. In conclusion, the dual RPA-LFD assay established in this study had practical significance for the rapid detection of S. typhimurium and S. enteritidis in the future.

Current Trends in RNA Virus Detection via Nucleic Acid Isothermal Amplification-Based Platforms

Ribonucleic acid (RNA) viruses are one of the major classes of pathogens that cause human diseases. The conventional method to detect RNA viruses is real-time quantitative reverse transcription polymerase chain reaction (qRT-PCR), but it has some limitations. It is expensive and time-consuming, with infrastructure and trained personnel requirements. Its high throughput requires sophisticated automation and large-scale infrastructure. Isothermal amplification methods have been explored as an alternative to address these challenges. These methods are rapid, user-friendly, low-cost, can be performed in less specialized settings, and are highly accurate for detecting RNA viruses. Microfluidic technology provides an ideal platform for performing virus diagnostic tests, including sample preparation, immunoassays, and nucleic acid-based assays. Among these techniques, nucleic acid isothermal amplification methods have been widely integrated with microfluidic platforms for RNA virus detection owing to their simplicity, sensitivity, selectivity, and short analysis time. This review summarizes some common isothermal amplification methods for RNA viruses. It also describes commercialized devices and kits that use isothermal amplification techniques for SARS-CoV-2 detection. Furthermore, the most recent applications of isothermal amplification-based microfluidic platforms for RNA virus detection are discussed in this article.

Fully integrated sample-in-answer-out platform for viral detection using digital reverse transcription recombinase polymerase amplification (dRT-RPA)

Recombinase polymerase amplification (RPA) is one of the most promising diagnostic methods for pathogen detection, owing to the simplified isothermal amplification technique. Using one-step digital reverse transcription RPA (dRT-RPA) to detect viral RNA provides a fast diagnosis and absolute quantification. Here, we present a chip that purifies, digitalizes, and detects viral RNA of SARS-CoV-2 in a fully automated and sensitive manner. The chip purifies the RNA using the surface charge concept of magnet bead-RNA binding, then mixes the RNA with the amplification reagents, digitalizes the amplification mixture, and performs dRT-RPA. RNA-bead complex is transported among purification buffers that are separated by an oil phase. For reagent manipulation and mixing, a magnetic valve system is integrated on the chip, where an external magnet controls the reagent direction and time of addition. Besides, a novel vacuum system is suggested to drive and regulate the reagents into two fluid systems simultaneously in ∼2 min. We also developed a cost-effective way to perform fluorescent detection for dRT-RPA on chip by using EvaGreen® dye. With integrated heating and optical detection system, the on-chip dRT-RPA presents a sample-to-answer detection platform for absolute viral RNA quantitation in 37 min and a sensitivity as low as 10 RNA copies/μL. Hence, this platform is expected to be a useful tool for accurate and automated diagnosis of infectious diseases.