Spatial separation of protein domains is not necessary for catalytic activity or substrate binding in a xylanase

Marine Bacteroidetes enzymatically digest xylans from terrestrial plants

Marine Bacteroidetes that degrade polysaccharides contribute to carbon cycling in the ocean. Organic matter, including glycans from terrestrial plants, might enter the oceans through rivers. Whether marine bacteria degrade structurally related glycans from diverse sources including terrestrial plants and marine algae was previously unknown. We show that the marine bacterium Flavimarina sp. Hel_I_48 encodes two polysaccharide utilization loci (PULs) which degrade xylans from terrestrial plants and marine algae. Biochemical experiments revealed activity and specificity of the encoded xylanases and associated enzymes of these PULs. Proteomics indicated that these genomic regions respond to glucuronoxylans and arabinoxylans. Substrate specificities of key enzymes suggest dedicated metabolic pathways for xylan utilization. Some of the xylanases were active on different xylans with the conserved β-1,4-linked xylose main chain. Enzyme activity was consistent with growth curves showing Flavimarina sp. Hel_I_48 uses structurally different xylans. The observed abundance of related xylan-degrading enzyme repertoires in genomes of other marine Bacteroidetes indicates similar activities are common in the ocean. The here presented data show that certain marine bacteria are genetically and biochemically variable enough to access parts of structurally diverse xylans from terrestrial plants as well as from marine algal sources.

Biodegradation of 4-hydroxybenzoic acid by Acinetobacter johnsonii FZ-5 and Klebsiella oxytoca FZ-8 under anaerobic conditions

4-Hydroxybenzoic acid (4-HBA) is a common organic compound that is prevalent in the environment, and the persistence of 4-HBA residues results in exertion of pollution-related detrimental effects. Bioremediation is an effective method for the removal of 4-HBA from the environment. In this study, two bacterial strains FZ-5 and FZ-8 capable of utilizing 4-HBA as the sole carbon and energy source under anaerobic conditions were isolated from marine sediment samples. Phylogenetic analysis identified the two strains FZ-5 and FZ-8 as Acinetobacter johnsonii and Klebsiella oxytoca, respectively. The strains FZ-5 and FZ-8 degraded 2000 mg·L^-1 4-HBA in 72 h with degradation rates of 71.04% and 80.10%, respectively. The optimum culture conditions for degradation by the strains and crude enzymes were also investigated. The strains FZ-5 and FZ-8 also exhibited the ability to degrade other lignin-derived compounds, such as protocatechuic acid, cinnamic acid, and vanillic acid. Immobilization of the two strains showed that they could be used for the bioremediation of 4-HBA in an aqueous environment. Soils inoculated with the strains FZ-5 and FZ-8 showed higher degradation of 4-HBA than the uninoculated soil, and the strains could survive efficiently in anaerobic soil. This is the first report of 4-HBA-degrading bacteria, belonging to the two genera, which showed degradation ability under anaerobic conditions. This study expound the strains could efficiently degrade 4-HBA in anaerobic soil and will help in the development of 4-HBA anaerobic bioremediation systems.

Polysaccharide degradation systems of the saprophytic bacterium Cellvibrio japonicus

Study of recalcitrant polysaccharide degradation by bacterial systems is critical for understanding biological processes such as global carbon cycling, nutritional contributions of the human gut microbiome, and the production of renewable fuels and chemicals. One bacterium that has a robust ability to degrade polysaccharides is the Gram-negative saprophyte Cellvibrio japonicus. A bacterium with a circuitous history, C. japonicus underwent several taxonomy changes from an initially described Pseudomonas sp. Most of the enzymes described in the pre-genomics era have also been renamed. This review aims to consolidate the biochemical, structural, and genetic data published on C. japonicus and its remarkable ability to degrade cellulose, xylan, and pectin substrates. Initially, C. japonicus carbohydrate-active enzymes were studied biochemically and structurally for their novel polysaccharide binding and degradation characteristics, while more recent systems biology approaches have begun to unravel the complex regulation required for lignocellulose degradation in an environmental context. Also included is a discussion for the future of C. japonicus as a model system, with emphasis on current areas unexplored in terms of polysaccharide degradation and emerging directions for C. japonicus in both environmental and biotechnological applications.

A novel, noncatalytic carbohydrate-binding module displays specificity for galactose-containing polysaccharides through calcium-mediated oligomerization

The enzymic degradation of plant cell walls plays a central role in the carbon cycle and is of increasing environmental and industrial significance. The catalytic modules of enzymes that catalyze this process are generally appended to noncatalytic carbohydrate-binding modules (CBMs). CBMs potentiate the rate of catalysis by bringing their cognate enzymes into intimate contact with the target substrate. A powerful plant cell wall-degrading system is the Clostridium thermocellum multienzyme complex, termed the "cellulosome." Here, we identify a novel CBM (CtCBM62) within the large C. thermocellum cellulosomal protein Cthe_2193 (defined as CtXyl5A), which establishes a new CBM family. Phylogenetic analysis of CBM62 members indicates that a circular permutation occurred within the family. CtCBM62 binds to d-galactose and l-arabinopyranose in either anomeric configuration. The crystal structures of CtCBM62, in complex with oligosaccharides containing α- and β-galactose residues, show that the ligand-binding site in the β-sandwich protein is located in the loops that connect the two β-sheets. Specificity is conferred through numerous interactions with the axial O4 of the target sugars, a feature that distinguishes galactose and arabinose from the other major sugars located in plant cell walls. CtCBM62 displays tighter affinity for multivalent ligands compared with molecules containing single galactose residues, which is associated with precipitation of these complex carbohydrates. These avidity effects, which confer the targeting of polysaccharides, are mediated by calcium-dependent oligomerization of the CBM.

Carbohydrate-binding modules promote the enzymatic deconstruction of intact plant cell walls by targeting and proximity effects

Cell wall degrading enzymes have a complex molecular architecture consisting of catalytic modules and noncatalytic carbohydrate-binding modules (CBMs). The function of CBMs in cell wall degrading processes is poorly understood. Here, we have evaluated the potential enzyme-targeting function of CBMs in the context of intact primary and secondary cell wall deconstruction. The capacity of a pectate lyase to degrade pectic homogalacturonan in primary cell walls was potentiated by cellulose-directed CBMs but not by xylan-directed CBMs. Conversely, the arabinofuranosidase-mediated removal of side chains from arabinoxylan in xylan-rich and cellulose-poor wheat grain endosperm cell walls was enhanced by a xylan-binding CBM but less so by a crystalline cellulose-specific module. The capacity of xylanases to degrade xylan in secondary cell walls was potentiated by both xylan- and cellulose-directed CBMs. These studies demonstrate that CBMs can potentiate the action of a cognate catalytic module toward polysaccharides in intact cell walls through the recognition of nonsubstrate polysaccharides. The targeting actions of CBMs therefore have strong proximity effects within cell wall structures, explaining why cellulose-directed CBMs are appended to many noncellulase cell wall hydrolases.

Cloning of a rumen fungal xylanase gene and purification of the recombinant enzyme via artificial oil bodies

A gene encoding a xylanase, named xynS20, was cloned from the ruminal fungus Neocallimastix patriciarum. The DNA sequence of xynS20 revealed that the gene was 1,008 bp in size and encoded amino acid sequences with a predicted molecular weight of 36 kDa. The amino acid sequence alignment showed that the highest sequence identity (28.4%) is with insect gut xylanase XYL6805. According to the sequence-based classification, a putative conserved domain of glycosyl hydrolase family 11 was detected at the N-terminus of XynS20 and a putative conserved domain of family 1 carbohydrate-binding module (CBM) was observed at the C-terminus of XynS20. An Asn-rich linker sequence was found between the N-terminal catalytic domain and the C-terminal CBM of XynS20. To examine the activity of the gene product, xynS20 gene was cloned as an oleosin-fused protein, expressed in Escherichia coli, affinity-purified by formation of artificial oil bodies, released from oleosin by intein-mediated peptide cleavage, and finally harvested by concentration of the supernatant. The specific activity of purified XynS20 toward oat spelt xylan was 1,982.8 U mg(-1). The recombinant XynS20 was stable in the mild acid pH range from 5.0 to 6.0, and the optimum pH was 6.0. The optimal reaction temperature of XynS20 was 45 degrees C; at temperatures below 30 and above 55 degrees C, enzyme activity was less than 50% of that at the optimal temperature.

Insights into plant cell wall degradation from the genome sequence of the soil bacterium Cellvibrio japonicus

The plant cell wall, which consists of a highly complex array of interconnecting polysaccharides, is the most abundant source of organic carbon in the biosphere. Microorganisms that degrade the plant cell wall synthesize an extensive portfolio of hydrolytic enzymes that display highly complex molecular architectures. To unravel the intricate repertoire of plant cell wall-degrading enzymes synthesized by the saprophytic soil bacterium Cellvibrio japonicus, we sequenced and analyzed its genome, which predicts that the bacterium contains the complete repertoire of enzymes required to degrade plant cell wall and storage polysaccharides. Approximately one-third of these putative proteins (57) are predicted to contain carbohydrate binding modules derived from 13 of the 49 known families. Sequence analysis reveals approximately 130 predicted glycoside hydrolases that target the major structural and storage plant polysaccharides. In common with that of the colonic prokaryote Bacteroides thetaiotaomicron, the genome of C. japonicus is predicted to encode a large number of GH43 enzymes, suggesting that the extensive arabinose decorations appended to pectins and xylans may represent a major nutrient source, not just for intestinal bacteria but also for microorganisms that occupy terrestrial ecosystems. The results presented here predict that C. japonicus possesses an extensive range of glycoside hydrolases, lyases, and esterases. Most importantly, the genome of C. japonicus is remarkably similar to that of the gram-negative marine bacterium, Saccharophagus degradans 2-40(T). Approximately 50% of the predicted C. japonicus plant-degradative apparatus appears to be shared with S. degradans, consistent with the utilization of plant-derived complex carbohydrates as a major substrate by both organisms.

The linker region plays a key role in the adaptation to cold of the cellulase from an Antarctic bacterium

The psychrophilic cellulase, Cel5G, from the Antarctic bacterium Pseudoalteromonas haloplanktis is composed of a catalytic module (CM) joined to a carbohydrate-binding module (CBM) by an unusually long, extended and flexible linker region (LR) containing three loops closed by three disulfide bridges. To evaluate the possible role of this region in cold adaptation, the LR was sequentially shortened by protein engineering, successively deleting one and two loops of this module, whereas the last disulfide bridge was also suppressed by replacing the last two cysteine residue by two alanine residues. The kinetic and thermodynamic properties of the mutants were compared with those of the full-length enzyme, and also with those of the cold-adapted CM alone and with those of the homologous mesophilic enzyme, Cel5A, from Erwinia chrysanthemi. The thermostability of the mutated enzymes as well as their relative flexibility were evaluated by differential scanning calorimetry and fluorescence quenching respectively. The topology of the structure of the shortest mutant was determined by SAXS (small-angle X-ray scattering). The data indicate that the sequential shortening of the LR induces a regular decrease of the specific activity towards macromolecular substrates, reduces the relative flexibility and concomitantly increases the thermostability of the shortened enzymes. This demonstrates that the long LR of the full-length enzyme favours the catalytic efficiency at low and moderate temperatures by rendering the structure not only less compact, but also less stable, and plays a crucial role in the adaptation to cold of this cellulolytic enzyme.

Phylogenetic and expression analysis of ZnF-AN1 genes in plants

In plants, ZnF-AN1 genes are part of a multigene family with 13 members in Arabidopsis thaliana, 19 members in Populus trichocarpa, 17 members in Oryza sativa, at least 11 members in Zea mays, and 2 members in Chlamydomonas reinhardtii. All ZnF-AN1 genes contain the ZnF-AN1 domain. According to the phylogenetic analysis of the ZnF-AN1 domain, we divided plant ZnF-AN1 genes into two types. The coding sequences of most type I members do not possess any introns, while most type II members do possess intron(s). Through Northern blot analysis of maize members and digital Northern analysis of Arabidopsis members, we found that most ZnF-AN1 genes are involved in responses to abiotic stresses. The evolutionary analysis indicated that the expansion rate of type I was higher than that of type II. After expansion, some ZnF-AN1 genes may have gained new functions, some may have lost their functions, and some were specialized to perform their functions in stress-specific or tissue-specific modes. In addition, we propose an evolutionary model of type II ZnF-AN1 genes in plants.

Understanding the biological rationale for the diversity of cellulose-directed carbohydrate-binding modules in prokaryotic enzymes

Plant cell walls are degraded by glycoside hydrolases that often contain noncatalytic carbohydrate-binding modules (CBMs), which potentiate degradation. There are currently 11 sequence-based cellulose-directed CBM families; however, the biological significance of the structural diversity displayed by these protein modules is uncertain. Here we interrogate the capacity of eight cellulose-binding CBMs to bind to cell walls. These modules target crystalline cellulose (type A) and are located in families 1, 2a, 3a, and 10 (CBM1, CBM2a, CBM3a, and CBM10, respectively); internal regions of amorphous cellulose (type B; CBM4-1, CBM17, CBM28); and the ends of cellulose chains (type C; CBM9-2). Type A CBMs bound particularly effectively to secondary cell walls, although they also recognized primary cell walls. Type A CBM2a and CBM10, derived from the same enzyme, displayed differential binding to cell walls depending upon cell type, tissue, and taxon of origin. Type B CBMs and the type C CBM displayed much weaker binding to cell walls than type A CBMs. CBM17 bound more extensively to cell walls than CBM4-1, even though these type B modules display similar binding to amorphous cellulose in vitro. The thickened primary cell walls of celery collenchyma showed significant binding by some type B modules, indicating that in these walls the cellulose chains do not form highly ordered crystalline structures. Pectate lyase treatment of sections resulted in an increased binding of cellulose-directed CBMs, demonstrating that decloaking cellulose microfibrils of pectic polymers can increase CBM access. The differential recognition of cell walls of diverse origin provides a biological rationale for the diversity of cellulose-directed CBMs that occur in cell wall hydrolases and conversely reveals the variety of cellulose microstructures in primary and secondary cell walls.

Probing the structural basis for the difference in thermostability displayed by family 10 xylanases

Thermostability is an important property of industrially significant hydrolytic enzymes: understanding the structural basis for this attribute will underpin the future biotechnological exploitation of these biocatalysts. The Cellvibrio family 10 (GH10) xylanases display considerable sequence identity but exhibit significant differences in thermostability; thus, these enzymes represent excellent models to examine the structural basis for the variation in stability displayed by these glycoside hydrolases. Here, we have subjected the intracellular Cellvibrio mixtus xylanase CmXyn10B to forced protein evolution. Error-prone PCR and selection identified a double mutant, A334V/G348D, which confers an increase in thermostability. The mutant has a Tm 8 degrees C higher than the wild-type enzyme and, at 55 degrees C, the first-order rate constant for thermal inactivation of A334V/G348D is 4.1 x 10(-4) min(-1), compared to a value of 1.6 x 10(-1) min(-1) for the wild-type enzyme. The introduction of the N to C-terminal disulphide bridge into A334V/G348D, which increases the thermostability of wild-type CmXyn10B, conferred a further approximately 2 degrees C increase in the Tm of the double mutant. The crystal structure of A334V/G348D showed that the introduction of Val334 fills a cavity within the hydrophobic core of the xylanase, increasing the number of van der Waals interactions with the surrounding aromatic residues, while O(delta1) of Asp348 makes an additional hydrogen bond with the amide of Gly344 and O(delta2) interacts with the arabinofuranose side-chain of the xylose moiety at the -2 subsite. To investigate the importance of xylan decorations in productive substrate binding, the activity of wild-type CmXyn10B, the mutant A334V/G348D, and several other GH10 xylanases against xylotriose and xylotriose containing an arabinofuranose side-chain (AX3) was assessed. The enzymes were more active against AX3 than xylotriose, providing evidence that the arabinose side-chain makes a generic contribution to substrate recognition by GH10 xylanases.

Kinetics of endoglucanase and endoxylanase uptake by soybean seeds

The uptakes of endoglucanase and endoxylanase by soybean were studied by measuring the fluorescent intensity of a carboxyfluorescein. The disappearance rates of these enzymes from solution were compared with predictions from different models. The Freundlich model provided the best fit for our data. Enzyme concentration in the solution did not change significantly after 11 d, and therefore it was assumed that equilibrium was reached. Average mass transfer coefficient was calculated for both endoglucanase and endoxylanase from the plot of the rate of uptake against (C(l av) -Cl*) and a value of 4 x 10(-5) ms(-1) was obtained. K value was used to calculate the effective diffusivities of the two enzymes assuming a slice. It is found that K was asymptotic with long residence times, and a value of 4.8 x 10(-10) m2 s(-1) was obtained.

Effects of the PT region of EngD and HLD of CbpA on solubility, catalytic activity and purification characteristics of EngD-CBDCbpA fusions from Clostridium cellulovorans

Chimeric proteins combining the catalytic N-terminal region of native EngD with its proline-threonine-threonine (PT) linker region, hydrophilic domain (HLD) and cellulose binding domain (CBD) of cellulose binding protein A (CbpA) from Clostridium cellulovorans were constructed, expressed, and analyzed. The chimeric proteins with CBD(CbpA) all demonstrated strong affinity to Avicel. The chimeric protein with the PT region of EngD and the HLD had the best catalytic activity and the highest estimated percentage of soluble protein amongst the chimeric proteins. Native EngD and two of the chimeric proteins (EngD-PT-HLD-CBD and EngD-CBD) were purified and their characteristics analyzed. Their binding affinities to Avicel as well as their enzymatic activities against various substrates were found to be consistent with the results we saw from protein lysate samples, which was good binding to Avicel but a decrease in solubility and catalytic activities in chimeric proteins without PT and/or HLD. The reasons for these are discussed. These fusion proteins may be important in applications, such as immobilization to solid cellulose substrate for purification of proteins and enrichment/aggregation of protein complexes.

The Use of Forced Protein Evolution to Investigate and Improve Stability of Family 10 Xylanases

Metal ions such as calcium often play a key role in protein thermostability. The inclusion of metal ions in industrial processes is, however, problematic. Thus, the evolution of enzymes that display enhanced stability, which is not reliant on divalent metals, is an important biotechnological goal. Here we have used forced protein evolution to interrogate whether the stabilizing effect of calcium in an industrially relevant enzyme can be replaced with amino acid substitutions. Our study has focused on the GH10 xylanase CjXyn10A from Cellvibrio japonicus, which contains an extended calcium binding loop that confers proteinase resistance and thermostability. Three rounds of error-prone PCR and selection identified a treble mutant, D262N/A80T/R347C, which in the absence of calcium is more thermostable than wild type CjXyn10A bound to the divalent metal. D262N influences the properties of the calcium binding site, A80T fills a cavity in the enzyme, increasing the number of hydrogen bonds and van der Waals interactions, and the R347C mutation introduces a disulfide bond that decreases the free energy of the unfolded enzyme. A derivative of CjXyn10A (CfCjXyn10A) in which the calcium binding loop has been replaced with a much shorter loop from Cellulomonas fimi CfXyn10A was also subjected to forced protein evolution to select for thermostablizing mutations. Two amino acid substitutions within the introduced loop and the A80T mutation increased the thermostability of the enzyme. This study demonstrates how forced protein evolution can be used to introduce enhanced stability into industrially relevant enzymes while removing calcium as a major stability determinant.

Glycoside hydrolase carbohydrate-binding modules as molecular probes for the analysis of plant cell wall polymers

Novel molecular probes have been developed for the analysis and detection of polysaccharides in plant cell walls using carbohydrate-binding modules (CBMs) derived from modular glycoside hydrolases belonging to families 2a, 6, and 29. Recombinant forms of these proteins containing his-tags, in conjunction with anti-his-tag detection, provide a flexible system that utilizes CBMs as molecular probes in a range of applications. Assays for the rapid analysis of the binding of CBMs to polysaccharides and oligosaccharides using nitrocellulose-based CBM macroarrays and microtiter plate-based CBM capture and competitive-inhibition assays are described. We also demonstrate the use of CBMs with his-tags for the localization of their target ligands in planta. The generation of molecular probes from other families of CBMs will dramatically increase the repertoire of molecular probes available to determine the developmental and functional aspects of plant cell walls.

Identification and analysis of polyserine linker domains in prokaryotic proteins with emphasis on the marine bacterium Microbulbifer degradans

Polyserine linkers (PSLs) are interdomain, serine-rich sequences found in modular proteins. Though common among eukaryotes, their presence in prokaryotic enzymes is limited. We identified 46 extracellular proteins involved in complex carbohydrate degradation from Microbulbifer degradans that contain PSLs that separate carbohydrate-binding domains or catalytic domains from other binding domains. In nine M. degradans proteins, PSLs also separated amino-terminal lipoprotein acylation sites from the remainder of the polypeptide. Furthermore, among the 76 PSL proteins identified in sequence repositories, 65 are annotated as proteins involved in complex carbohydrate degradation. We discuss the notion that PSLs are flexible, disordered spacer regions that enhance substrate accessibility.

The family 6 carbohydrate binding module CmCBM6-2 contains two ligand-binding sites with distinct specificities

The microbial degradation of the plant cell wall is an important biological process, representing a major component of the carbon cycle. Enzymes that mediate the hydrolysis of this composite structure are modular proteins that contain non-catalytic carbohydrate binding modules (CBMs) that enhance catalytic activity. CBMs are grouped into sequence-based families, and in a previous study we showed that a family 6 CBM (CBM6) that interacts with xylan contains two potential ligand binding clefts, designated cleft A and cleft B. Mutagenesis and NMR studies showed that only cleft A in this protein binds to xylan. Family 6 CBMs bind to a range of polysaccharides, and it was proposed that the variation in ligand specificity observed in these proteins reflects the specific cleft that interacts with the target carbohydrate. Here the biochemical properties of the C-terminal cellulose binding CBM6 (CmCBM6-2) from Cellvibrio mixtus endoglucanase 5A were investigated. The CBM binds to the beta1,4-beta1,3-mixed linked glucans lichenan and barley beta-glucan, cello-oligosaccharides, insoluble forms of cellulose, the beta1,3-glucan laminarin, and xylooligosaccharides. Mutagenesis studies, informed by the crystal structure of the protein (presented in the accompanying paper, Pires, V. M. R., Henshaw, J. L., Prates, J. A. M., Bolam, D., Ferreira, L. M. A. Fontes, C. M. G. A., Henrissat, B., Planas, A., Gilbert, H. J., Czjzek, M. (2004) J. Biol. Chem. 279, 21560-21568), show that both cleft A and B can accommodate cello-oligosaccharides and laminarin displays a preference for cleft A, whereas xylooligosaccharides exhibit absolute specificity for this site, and the beta1,4,-beta1,3-mixed linked glucans interact only with cleft B. The binding of CmCBM6-2 to insoluble cellulose involves synergistic interactions between cleft A and cleft B. These data show that CmCBM6-2 contains two binding sites that display differences in ligand specificity, supporting the view that distinct binding clefts with different specificities can contribute to the variation in ligand recognition displayed by family 6 CBMs. This is in sharp contrast to other CBM families, where variation in ligand binding is a result of changes in the topology of a single carbohydrate-binding site.

Structural and biochemical analysis of Cellvibrio japonicus xylanase 10C: how variation in substrate-binding cleft influences the catalytic profile of family GH-10 xylanases

Microbial degradation of the plant cell wall is the primary mechanism by which carbon is utilized in the biosphere. The hydrolysis of xylan, by endo-beta-1,4-xylanases (xylanases), is one of the key reactions in this process. Although amino acid sequence variations are evident in the substrate binding cleft of "family GH10" xylanases (see afmb.cnrs-mrs.fr/CAZY/), their biochemical significance is unclear. The Cellvibrio japonicus GH10 xylanase CjXyn10C is a bi-modular enzyme comprising a GH10 catalytic module and a family 15 carbohydrate-binding module. The three-dimensional structure at 1.85 A, presented here, shows that the sequence joining the two modules is disordered, confirming that linker sequences in modular glycoside hydrolases are highly flexible. CjXyn10C hydrolyzes xylan at a rate similar to other previously described GH10 enzymes but displays very low activity against xylooligosaccharides. The poor activity on short substrates reflects weak binding at the -2 subsite of the enzyme. Comparison of CjXyn10C with other family GH10 enzymes reveals "polymorphisms" in the substrate binding cleft including a glutamate/glycine substitution at the -2 subsite and a tyrosine insertion in the -2/-3 glycone region of the substrate binding cleft, both of which contribute to the unusual properties of the enzyme. The CjXyn10C-substrate complex shows that Tyr-340 stacks against the xylose residue located at the -3 subsite, and the properties of Y340A support the view that this tyrosine plays a pivotal role in substrate binding at this location. The generic importance of using CjXyn10C as a template in predicting the biochemical properties of GH10 xylanases is discussed.

The modular architecture of Cellvibrio japonicus mannanases in glycoside hydrolase families 5 and 26 points to differences in their role in mannan degradation

beta-1,4-Mannanases (mannanases), which hydrolyse mannans and glucomannans, are located in glycoside hydrolase families (GHs) 5 and 26. To investigate whether there are fundamental differences in the molecular architecture and biochemical properties of GH5 and GH26 mannanases, four genes encoding these enzymes were isolated from Cellvibrio japonicus and the encoded glycoside hydrolases were characterized. The four genes, man5A, man5B, man5C and man26B, encode the mannanases Man5A, Man5B, Man5C and Man26B, respectively. Man26B consists of an N-terminal signal peptide linked via an extended serine-rich region to a GH26 catalytic domain. Man5A, Man5B and Man5C contain GH5 catalytic domains and non-catalytic carbohydrate-binding modules (CBMs) belonging to families 2a, 5 and 10; Man5C in addition contains a module defined as X4 of unknown function. The family 10 and 2a CBMs bound to crystalline cellulose and ivory nut crystalline mannan, displaying very similar properties to the corresponding family 10 and 2a CBMs from Cellvibrio cellulases and xylanases. CBM5 bound weakly to these crystalline polysaccharides. The catalytic domains of Man5A, Man5B and Man26B hydrolysed galactomannan and glucomannan, but displayed no activity against crystalline mannan or cellulosic substrates. Although Man5C was less active against glucomannan and galactomannan than the other mannanases, it did attack crystalline ivory nut mannan. All the enzymes exhibited classic endo-activity producing a mixture of oligosaccharides during the initial phase of the reaction, although their mode of action against manno-oligosaccharides and glucomannan indicated differences in the topology of the respective substrate-binding sites. This report points to a different role for GH5 and GH26 mannanases from C. japonicus. We propose that as the GH5 enzymes contain CBMs that bind crystalline polysaccharides, these enzymes are likely to target mannans that are integral to the plant cell wall, while GH26 mannanases, which lack CBMs and rapidly release mannose from polysaccharides and oligosaccharides, target the storage polysaccharide galactomannan and manno-oligosaccharides.

Enzymatic properties of a neutral endo-1,3(4)-beta-xylanase Xyl II from Bacillus subtilis

A Bacillus sp. CCMI 966, characterised as Bacillus subtilis, has a duplication time of about 24 min. It produces at least two extracellular xylanases, Xyl I and Xyl II. The extracellular xylanase activity seems to be strongly correlated with the biomass growth profile. The Xyl II isoenzyme was purified by ammonium sulphate precipitation and anionic exchange chromatography, with a purification factor of 8.3. The molecular weight of the isoenzyme was estimated by SDS-PAGE revealing that Xyl II is a multimeric enzyme with a catalytic subunit of about 20 kDa. Under non-denaturing conditions, a molecular weight of about 340 kDa was obtained by native PAGE gel and of 20 kDa by gel filtration chromatography. The enzyme showed an optimum pH and temperature of 6.0 at 60 degrees C. Xyl II was stable at 40 degrees C for 180 min at pH 6.0. The specificity of Xyl II for different substrates was evaluated. Xyl II presents a higher affinity towards OSX, with a K(m) of 1.56 g l(-1) and showed the ability to hydrolyse laminarin, with a K(m) of 1.02 g l(-1). Xylotetraose is the main product of xylan degradation. The Xyl II ability for binding to cellulose and/or xylan was also studied.

The location of the ligand-binding site of carbohydrate-binding modules that have evolved from a common sequence is not conserved

Polysaccharide-degrading enzymes are generally modular proteins that contain non-catalytic carbohydrate-binding modules (CBMs), which potentiate the activity of the catalytic module. CBMs have been grouped into sequence-based families, and three-dimensional structural data are available for half of these families. Clostridium thermocellum xylanase 11A is a modular enzyme that contains a CBM from family 6 (CBM6), for which no structural data are available. We have determined the crystal structure of this module to a resolution of 2.1 A. The protein is a beta-sandwich that contains two potential ligand-binding clefts designated cleft A and B. The CBM interacts primarily with xylan, and NMR spectroscopy coupled with site-directed mutagenesis identified cleft A, containing Trp-92, Tyr-34, and Asn-120, as the ligand-binding site. The overall fold of CBM6 is similar to proteins in CBM families 4 and 22, although surprisingly the ligand-binding site in CBM4 and CBM22 is equivalent to cleft B in CBM6. These structural data define a superfamily of CBMs, comprising CBM4, CBM6, and CBM22, and demonstrate that, although CBMs have evolved from a relatively small number of ancestors, the structural elements involved in ligand recognition have been assembled at different locations on the ancestral scaffold.

A new family of rhamnogalacturonan lyases contains an enzyme that binds to cellulose

Pseudomonas cellulosa is an aerobic bacterium that synthesizes an extensive array of modular cellulases and hemicellulases, which have a modular architecture consisting of catalytic domains and distinct non-catalytic carbohydrate-binding modules (CBMs). To investigate whether the main-chain-cleaving pectinases from this bacterium also have a modular structure, a library of P. cellulosa genomic DNA, constructed in lambdaZAPII, was screened for pectinase-encoding sequences. A recombinant phage that attacked arabinan, galactan and rhamnogalacturonan was isolated. The encoded enzyme, designated Rgl11A, had a modular structure comprising an N-terminal domain that exhibited homology to Bacillus and Streptomyces proteins of unknown function, a middle domain that exhibited sequence identity to fibronectin-3 domains, and a C-terminal domain that was homologous to family 2a CBMs. Expression of the three modules of the Pseudomonas protein in Escherichia coli showed that its C-terminal module was a functional cellulose-binding domain, and the N-terminal module consisted of a catalytic domain that hydrolysed rhamnogalacturonan-containing substrates. The activity of Rgl11A against apple- and potato-derived rhamnogalacturonan substrates indicated that the enzyme had a strong preference for rhamnogalacturonans that contained galactose side chains, and which were not esterified. The enzyme had an absolute requirement for calcium, a high optimum pH, and catalysis was associated with an increase in absorbance at 235 nm, indicating that glycosidic bond cleavage was mediated via a beta-elimination mechanism. These data indicate that Rgl11A is a rhamnogalacturonan lyase and, together with the homologous Bacillus and Streptomyces proteins, comprise a new family of polysaccharide lyases. The presence of a family 2a CBM in Rgl11A, and in a P. cellulosa pectate lyase described in the accompanying paper [Brown, Mallen, Charnock, Davies and Black (2001) Biochem. J. 355, 155-165] suggests that the capacity to bind cellulose plays an important role in the activity of main-chain-cleaving Pseudomonas pectinases, in addition to cellulases and hemicellulases.

Cellulose-binding domains promote hydrolysis of different sites on crystalline cellulose

The cohesin-dockerin interaction in Clostridium thermocellum cellulosome mediates the tight binding of cellulolytic enzymes to the cellulosome-integrating protein CipA. Here, this interaction was used to study the effect of different cellulose-binding domains (CBDs) on the enzymatic activity of C. thermocellum endoglucanase CelD (1,4-beta-d endoglucanase, EC) toward various cellulosic substrates. The seventh cohesin domain of CipA was fused to CBDs originating from the Trichoderma reesei cellobiohydrolases I and II (CBD(CBH1) and CBD(CBH2)) (1,4-beta-d glucan-cellobiohydrolase, EC), from the Cellulomonas fimi xylanase/exoglucanase Cex (CBD(Cex)) (beta-1,4-d glucanase, EC), and from C. thermocellum CipA (CBD(CipA)). The CBD-cohesin hybrids interacted with the dockerin domain of CelD, leading to the formation of CelD-CBD complexes. Each of the CBDs increased the fraction of cellulose accessible to hydrolysis by CelD in the order CBD(CBH1) < CBD(CBH2) approximately CBD(Cex) < CBD(CipA). In all cases, the extent of hydrolysis was limited by the disappearance of sites accessible to CelD. Addition of a batch of fresh cellulose after completion of the reaction resulted in a new burst of activity, proving the reversible binding of the intact complexes despite the apparent binding irreversibility of some CBDs. Furthermore, burst of activity also was observed upon adding new batches of CelD-CBD complexes that contained a CBD differing from the first one. This complementation between different CBDs suggests that the sites made available for hydrolysis by each of the CBDs are at least partially nonoverlapping. The only exception was CBD(CipA), whose sites appeared to overlap all of the other sites.

A novel Cellvibrio mixtus family 10 xylanase that is both intracellular and expressed under non-inducing conditions

Hydrolysis of the plant cell wall polysaccharides cellulose and xylan requires the synergistic interaction of a repertoire of extracellular enzymes. Recently, evidence has emerged that anaerobic bacteria can synthesize high levels of periplasmic xylanases which may be involved in the hydrolysis of small xylo-oligosaccharides absorbed by the micro-organism. Cellvibrio mixtus, a saprophytic aerobic soil bacterium that is highly active against plant cell wall polysaccharides, was shown to express internal xylanase activity when cultured on media containing xylan or glucose as sole carbon source. A genomic library of C. mixtus DNA, constructed in lambdaZAPII, was screened for xylanase activity. The nucleotide sequence of the genomic insert from a xylanase-positive clone that expressed intracellular xylanase activity in Escherichia coli revealed an ORF of 1137 bp (xynC), encoding a polypeptide with a deduced M(r) of 43413, defined as xylanase C (XylC). Probing a gene library of Pseudomonas fluorescens subsp. cellulosa with C. mixtus xynC identified a xynC homologue (designated xynG) encoding XylG; XylG and xynG were 67% and 63% identical to the corresponding C. mixtus sequences, respectively. Both XylC and XylG exhibit extensive sequence identity with family 10 xylanases, particularly with non-modular enzymes, and gene deletion studies on xynC supported the suggestion that they are single-domain xylanases. Purified recombinant XylC had an M(r) of 41000, and displayed biochemical properties typical of family 10 polysaccharidases. However, unlike previously characterized xylanases, XylC was particularly sensitive to proteolytic inactivation by pancreatic proteinases and was thermolabile. C. mixtus was grown to late-exponential phase in the presence of glucose or xylan and the cytoplasmic, periplasmic and cell envelope fractions were probed with anti-XylC antibodies. The results showed that XylC was absent from the culture media but was predominantly present in the periplasm of C. mixtus cells grown on glucose, xylan, CM-cellulose or Avicel. These data suggest that C. mixtus can express non-modular internal xylanases whose potential roles in the hydrolysis of plant cell wall components are discussed.

Cohesin-dockerin recognition in cellulosome assembly: experiment versus hypothesis

The cohesin-dockerin interaction provides the basis for incorporation of the individual enzymatic subunits into the cellulosome complex. In a previous article (Pagés et al., Proteins 1997;29:517-527) we predicted that four amino acid residues of the approximately 70-residue dockerin domain would serve as recognition codes for binding to the cohesin domain. The validity of the prediction was examined by site-directed mutagenesis of the suspected residues, whereby the species-specificity of the cohesin-dockerin interaction was altered. The results support the premise that the four residues indeed play a role in biorecognition, while additional residues may also contribute to the specificity of the interaction. Proteins 2000;39:170-177.

A family 26 mannanase produced by Clostridium thermocellum as a component of the cellulosome contains a domain which is conserved in mannanases from anaerobic fungi

Cellulosomes prepared by the cellulose affinity digestion method from Clostridium thermocellum culture supernatant hydrolysed carob galactomannan during incubation at 60 degrees C and pH 6.5. A recombinant phage expressing mannanase activity was isolated from a library of C. thermocellum genomic DNA constructed in lambdaZAPII. The cloned fragment of DNA containing a putative mannanase gene (manA) was sequenced, revealing an ORF of 1767 nt, encoding a protein (mannanase A; Man26A) of 589 aa with a molecular mass of 66816 Da. The putative catalytic domain (CD) of Man26A, identified by gene sectioning and sequence comparisons, displayed up to 32% identity with other mannanases belonging to family 26. Immediately downstream of the CD and separated from it by a short proline/threonine linker was a duplicated 24-residue dockerin motif, which is conserved in all C. thermocellum cellulosomal enzymes described thus far and mediates their attachment to the cellulosome-integrating protein (CipA). Man26A consisting of the CD alone (Man26A") was hyperexpressed in Escherichia coli BL21(DE3) and purified. The truncated enzyme hydrolysed soluble and insoluble mannan, displaying a temperature optimum of 65 degrees C and a pH optimum of 6.5, but exhibited no activity against other plant cell wall polysaccharides. Antiserum raised against Man26A" cross-reacted with a polypeptide with a molecular mass of 70000 Da that is part of the C. thermocellum cellulosome. A second variant of Man26A containing the N-terminal segment of 130 residues and the CD (Man26A") bound to ivory-nut mannan and weakly to soluble Carob galactomannan and insoluble cellulose. Man26A" consisting of the CD alone did not bind to these polysaccharides. These results indicate that the N-terminal 130 residues of mature Man26A may constitute a weak mannan-binding domain. Sequence comparisons revealed a lack of identity between this region of Man26A and other polysaccharide-binding domains, but significant identity with a region conserved in the three family 26 mannanases from the anaerobic fungus Piromyces equi.

Molecular and biochemical characterization of two xylanase-encoding genes from Cellulomonas pachnodae

Two xylanase-encoding genes, named xyn11A and xyn10B, were isolated from a genomic library of Cellulomonas pachnodae by expression in Escherichia coli. The deduced polypeptide, Xyn11A, consists of 335 amino acids with a calculated molecular mass of 34,383 Da. Different domains could be identified in the Xyn11A protein on the basis of homology searches. Xyn11A contains a catalytic domain belonging to family 11 glycosyl hydrolases and a C-terminal xylan binding domain, which are separated from the catalytic domain by a typical linker sequence. Binding studies with native Xyn11A and a truncated derivative of Xyn11A, lacking the putative binding domain, confirmed the function of the two domains. The second xylanase, designated Xyn10B, consists of 1,183 amino acids with a calculated molecular mass of 124,136 Da. Xyn10B also appears to be a modular protein, but typical linker sequences that separate the different domains were not identified. It comprises a N-terminal signal peptide followed by a stretch of amino acids that shows homology to thermostabilizing domains. Downstream of the latter domain, a catalytic domain specific for family 10 glycosyl hydrolases was identified. A truncated derivative of Xyn10B bound tightly to Avicel, which was in accordance with the identified cellulose binding domain at the C terminus of Xyn10B on the basis of homology. C. pachnodae, a (hemi)cellulolytic bacterium that was isolated from the hindgut of herbivorous Pachnoda marginata larvae, secretes at least two xylanases in the culture fluid. Although both Xyn11A and Xyn10B had the highest homology to xylanases from Cellulomonas fimi, distinct differences in the molecular organizations of the xylanases from the two Cellulomonas species were identified.

The type II and X cellulose-binding domains of Pseudomonas xylanase A potentiate catalytic activity against complex substrates by a common mechanism

Xylanase A (Pf Xyn10A), in common with several other Pseudomonas fluorescens subsp. cellulosa polysaccharidases, consists of a Type II cellulose-binding domain (CBD), a catalytic domain (Pf Xyn10A(CD)) and an internal domain that exhibits homology to Type X CBDs. The Type X CBD of Pf Xyn10A, expressed as a discrete entity (CBD(X)) or fused to the catalytic domain (Pf Xyn10A'), bound to amorphous and bacterial microcrystalline cellulose with a K(a) of 2.5 x 10(5) M(-1). CBD(X) exhibited no affinity for soluble forms of cellulose or cello-oligosaccharides, suggesting that the domain interacts with multiple cellulose chains in the insoluble forms of the polysaccharide. Pf Xyn10A' was 2-3 times more active against cellulose-hemicellulose complexes than Pf Xyn10A(CD); however, Pf Xyn10A' and Pf Xyn10A(CD) exhibited the same activity against soluble substrates. CBD(X) did not disrupt the structure of plant-cell-wall material or bacterial microcrystalline cellulose, and did not potentiate Pf Xyn10A(CD) when not covalently linked to the enzyme. There was no substantial difference in the affinity of full-length Pf Xyn10A and the enzyme's Type II CBD for cellulose. The activity of Pf Xyn10A against cellulose-hemicellulose complexes was similar to that of Pf Xyn10A', and a derivative of Pf Xyn10A in which the Type II CBD is linked to the Pf Xyn10A(CD) via a serine-rich linker sequence [Bolam, Cireula, McQueen-Mason, Simpson, Williamson, Rixon, Boraston, Hazlewood and Gilbert (1998) Biochem J. 331, 775-781]. These data indicate that CBD(X) is functional in Pf Xyn10A and that no synergy, either in ligand binding or in the potentiation of catalysis, is evident between the Type II and X CBDs of the xylanase.

A family IIb xylan-binding domain has a similar secondary structure to a homologous family IIa cellulose-binding domain but different ligand specificity

BACKGROUND

Many enzymes that digest polysaccharides contain separate polysaccharide-binding domains. Structures have been previously determined for a number of cellulose-binding domains (CBDs) from cellulases.

RESULTS

The family IIb xylan-binding domain 1 (XBD1) from Cellulomonas fimi xylanase D is shown to bind xylan but not cellulose. Its structure is similar to that of the homologous family IIa CBD from C. fimi Cex, consisting of two four-stranded beta sheets that form a twisted 'beta sandwich'. The xylan-binding site is a groove made from two tryptophan residues that stack against the faces of the sugar rings, plus several hydrogen-bonding polar residues.

CONCLUSIONS

The biggest difference between the family IIa and IIb domains is that in the former the solvent-exposed tryptophan sidechains are coplanar, whereas in the latter they are perpendicular, forming a twisted binding site. The binding sites are therefore complementary to the secondary structures of the ligands cellulose and xylan. XBD1 and CexCBD represent a striking example of two proteins that have high sequence similarity but a different function.

Molecular and biotechnological aspects of xylanases

Hemicellulolytic microorganisms play a significant role in nature by recycling hemicellulose, one of the main components of plant polysaccharides. Xylanases (EC 3.2.1.8) catalyze the hydrolysis of xylan, the major constituent of hemicellulose. The use of these enzymes could greatly improve the overall economics of processing lignocellulosic materials for the generation of liquid fuels and chemicals. Recently cellulase-free xylanases have received great attention in the development of environmentally friendly technologies in the paper and pulp industry. In microorganisms that produce xylanases low molecular mass fragments of xylan and their positional isomers play a key role in regulating its biosynthesis. Xylanase and cellulase production appear to be regulated separately, although the pleiotropy of mutations, which causes the elimination of both genes, suggests some linkage in the synthesis of the two enzymes. Xylanases are found in a cornucopia of organisms and the genes encoding them have been cloned in homologous and heterologous hosts with the objectives of overproducing the enzyme and altering its properties to suit commercial applications. Sequence analyses of xylanases have revealed distinct catalytic and cellulose binding domains, with a separate non-catalytic domain that has been reported to confer enhanced thermostability in some xylanases. Analyses of three-dimensional structures and the properties of mutants have revealed the involvement of specific tyrosine and tryptophan residues in the substrate binding site and of glutamate and aspartate residues in the catalytic mechanism. Many lines of evidence suggest that xylanases operate via a double displacement mechanism in which the anomeric configuration is retained, although some of the enzymes catalyze single displacement reactions with inversion of configuration. Based on a dendrogram obtained from amino acid sequence similarities the evolutionary relationship between xylanases is assessed. In addition the properties of xylanases from extremophilic organisms have been evaluated in terms of biotechnological applications.

Pseudomonas cellulose-binding domains mediate their effects by increasing enzyme substrate proximity

To investigate the mode of action of cellulose-binding domains (CBDs), the Type II CBD from Pseudomonas fluorescens subsp. cellulosa xylanase A (XYLACBD) and cellulase E (CELECBD) were expressed as individual entities or fused to the catalytic domain of a Clostridium thermocellum endoglucanase (EGE). The two CBDs exhibited similar Ka values for bacterial microcrystalline cellulose (CELECBD, 1.62x10(6) M-1; XYLACBD, 1.83x10(6) M-1) and acid-swollen cellulose (CELECBD, 1.66x10(6) M-1; XYLACBD, 1.73x10(6) M-1). NMR spectra of XYLACBD titrated with cello-oligosaccharides showed that the environment of three tryptophan residues was affected when the CBD bound cellohexaose, cellopentaose or cellotetraose. The Ka values of the XYLACBD for C6, C5 and C4 cello-oligosaccharides were estimated to be 3.3x10(2), 1.4x10(2) and 4.0x10(1) M-1 respectively, suggesting that the CBD can accommodate at least six glucose molecules and has a much higher affinity for insoluble cellulose than soluble oligosaccharides. Fusion of either the CELECBD or XYLACBD to the catalytic domain of EGE potentiated the activity of the enzyme against insoluble forms of cellulose but not against carboxymethylcellulose. The increase in cellulase activity was not observed when the CBDs were incubated with the catalytic domain of either EGE or XYLA, with insoluble cellulose and a cellulose/hemicellulose complex respectively as the substrates. Pseudomonas CBDs did not induce the extension of isolated plant cell walls nor weaken cellulose paper strips in the same way as a class of plant cell wall proteins called expansins. The XYLACBD and CELECBD did not release small particles from the surface of cotton. The significance of these results in relation to the mode of action of Type II CBDs is discussed.

Cellulose binding domains and linker sequences potentiate the activity of hemicellulases against complex substrates

To evaluate the role of the CBDs and linker sequences in Pseudomonas xylanase A (XYLA) and arabinofuranosidase C (XYLC), the catalytic activity of derivatives of these enzymes, lacking either the linker sequences or CBDs, was assessed. Removal of the CBDs or linker sequences did not affect the activity of either XYLA or XYLC against soluble arabinoxylan, while derivatives of XYLA, in which either the CBD or interdomain regions had been deleted, exhibited decreased activity against the xylan component of cellulose/hemicellulose complexes. Although a truncated derivative of XYLC (XYLC"'), lacking its CBD, was less active than the full-length enzyme against plant cell wall material containing highly substituted arabinoxylan, XYLC"' was more active than XYLC on complex substrates where the degree of substitution of arabinoxylan was very low. These data indicate that CBDs and linker sequences play an important role in the activity of hemicellulases against plant cell walls and other cellulose/hemicellulose complexes.

Analysis of xysA, a gene from Streptomyces halstedii JM8 that encodes a 45-kilodalton modular xylanase, Xys1

The gene xysA from Streptomyces halstedii JM8 encodes a protein of 461 amino acids (Xys1) which is secreted into the culture supernatant as a protein of 45 kDa (Xys1L). Later, this form is proteolytically processed after residue D-362 to produce the protein Xys1S, which conserves the same xylanolytic activity. The cleavage removes a domain of 99 amino acids that shows similarity to bacterial cellulose binding domains and that allows the protein Xys1L to bind to crystalline cellulose (Avicel). Expression of this monocistronic gene is affected by the carbon source present in the culture medium, xylan being the best inducer. By using an anti-Xys1L serum, we have been able to detect xylanases similar in size to Xys1L and Xys1S in most of the different Streptomyces species analyzed, suggesting the ubiquity of these types of xylanases and their processing mechanism.

Arabinanase A from Pseudomonas fluorescens subsp. cellulosa exhibits both an endo- and an exo- mode of action

Pseudomonas fluorescens subsp. cellulosa expressed arabinanase activity when grown on media supplemented with arabinan or arabinose. Arabinanase activity was not induced by the inclusion of other plant structural polysaccharides, and was repressed by the addition of glucose. The majority of the Pseudomonas arabinanase activity was extracellular. Screening of a genomic library of P. fluorescens subsp. cellulosa DNA constructed in Lambda ZAPII, for recombinants that hydrolysed Red-dyed arabinan, identified five arabinan-degrading plaques. Each of the phage contained the same Pseudomonas arabinanase gene, designated arbA, which was present as a single copy in the Pseudomonas genome. The nucleotide sequence of arbA revealed an open reading frame of 1041 bp encoding a protein, designated arabinanase A (ArbA), of Mr 39438. The N-terminal sequence of ArbA exhibited features typical of a prokaryotic signal peptide. Analysis of the primary structure of ArbA indicated that, unlike most Pseudomonas plant cell wall hydrolases, it did not contain linker sequences or have a modular structure, but consisted of a single catalytic domain. Sequence comparison between the Pseudomonas arabinanase and proteins in the SWISS-PROT database showed that ArbA exhibits greatest sequence identity with arabinanase A from Aspergillus niger, placing the enzyme in glycosyl hydrolase Family 43. The significance of the differing substrate specificities of enzymes in Family 43 is discussed. ArbA purifed from a recombinant strain of Escherichia coli had an Mr of 34000 and an N-terminal sequence identical to residues 32-51 of the deduced sequence of ArbA, and hydrolysed linear arabinan, carboxymethylarabinan and arabino-oligosaccharides. The enzyme displayed no activity against other plant structural polysaccharides, including branched sugar beet arabinan. ArbA produced almost exclusively arabinotriose from linear arabinan and appeared to hydrolyse arabino-oligosaccharides by successively releasing arabinotriose. ArbA and the Aspergillus arabinanase mediated a decrease in the viscosity of linear arabinan that was associated with a significant release of reducing sugar. We propose that ArbA is an arabinanase that exhibits both an endo- and an exo- mode of action.

Microorganisms and enzymes involved in the degradation of plant fiber cell walls

One of natures most important biological processes is the degradation of lignocellulosic materials to carbon dioxide, water and humic substances. This implies possibilities to use biotechnology in the pulp and paper industry and consequently, the use of microorganisms and their enzymes to replace or supplement chemical methods is gaining interest. This chapter describes the structure of wood and the main wood components, cellulose, hemicelluloses and lignins. The enzyme and enzyme mechanisms used by fungi and bacteria to modify and degrade these components are described in detail. Techniques for how to assay for these enzyme activities are also described. The possibilities for biotechnology in the pulp and paper industry and other fiber utilizing industries based on these enzymes are discussed.

Evidence that linker sequences and cellulose-binding domains enhance the activity of hemicellulases against complex substrates

Xylanase A (XYLA) and arabinofuranosidase C (XYLC) from Pseudomonas fluorescens subsp. cellulosa are modular enzymes consisting of discrete cellulose-binding domains (CBDs) and catalytic domains joined by serine-rich linker sequences. To evaluate the role of the CBDs and interdomain regions, the capacity of full-length and truncated derivatives of the two enzymes, lacking either the linker sequences or CBDs, to hydrolyse a range of substrates, and bind to cellulose, was determined. Removal of the CBDs did not affect either the activity of XYLA or XYLC against soluble arabinoxylan. Similarly, deletion of the linker sequences did not alter the affinity of the enzymes for cellulose or their activity against soluble substrates, even when bound to cellulose via the CBDs. Truncated derivatives of XYLA lacking either the linker sequences or the CBD were less active against xylan contained in cellulose-hemicellulose complexes, compared with the full-length xylanase. Similarly, removal of the CBD from XYLC diminished the activity of the enzyme (XYLC''') against plant-cell-wall material containing highly substituted arabinoxylan. The role of CBDs and linker sequences in the catalytic activity of hemicellulases against the plant cell wall is discussed.

Microbial hydrolysis of polysaccharides

Microorganisms are efficient degraders of starch, chitin, and the polysaccharides in plant cell walls. Attempts to purify hydrolases led to the realization that a microorganism may produce a multiplicity of enzymes, referred to as a system, for the efficient utilization of a polysaccharide. In order to fully characterize a particular enzyme, it must be obtained free of the other components of a system. Quite often, this proves to be very difficult because of the complexity of a system. This realization led to the cloning of the genes encoding them as an approach to eliminating other components. More than 400 such genes have been cloned and sequenced, and the enzymes they encode have been grouped into more than 50 families of related amino acid sequences. The enzyme systems revealed in this manner are complex on two quite different levels. First, many of the individual enzymes are complex, as they are modular proteins comprising one or more catalytic domains linked to ancillary domains that often include one or more substrate-binding domains. Second, the systems are complex, comprising from a few to 20 or more enzymes, all of which hydrolyze a particular substrate. Systems for the hydrolysis of plant cell walls usually contain more components than systems for the hydrolysis of starch and chitin because the cell walls contain several polysaccharides. In general, the systems produced by different microorganisms for the hydrolysis of a particular polysaccharide comprise similar enzymes from the same families.

Purification and characterisation of a major xylanase with cellulase and transferase activities from Fusarium oxysporum

A major xylanase from Fusarium oxysporum was purified to homogeneity by gel filtration, affinity, and ion-exchange chromatographies. It has a molecular mass of 60.2 kDa and pI of 6.6 and was optimally active at pH 7.4 and at 50 degrees C. The enzyme was stable over the pH range 5.8-8.2 at 40 degrees C for 24 h and lost 45% of its original activity at pH 9.0 under the identical conditions. The enzyme rapidly hydrolysed xylans from oat spelts (husks) and birchwood, but the activities on carboxymethylcellulose (CMC), filter paper, and Avicel were very low. Determination of kcat/Km revealed that the enzyme hydrolysed oat spelts and birchwood xylans, 15-30 times more efficiently than CMC. In a 24 h incubation, at pH 7.0 and 9.0, the enzyme hydrolysed oat spelts and birchwood xylans by 75 and 65%, respectively. However, at pH 7.0, the enzyme released almost equal amounts of xylose and xylobiose from both xylans, whereas at pH 9.0, the concentration of xylobiose was twice as muchi as that of xylose and xylotriose. Xylanase attacked preferentially the internal glycosidic bonds of xylo- and 4-methylumbelliferyl cello-oligosaccharides [MeUmb(Glc)n]. The enzyme catalysed transglycosylation reaction with xylotriose, xylotetraose, and xylopentaose as donors and 4-methylumbelliferyl beta-D-glucoside (MeUmbGlc) as an acceptor.

Novel cellulose-binding domains, NodB homologues and conserved modular architecture in xylanases from the aerobic soil bacteria Pseudomonas fluorescens subsp. cellulosa and Cellvibrio mixtus

To test the hypothesis that selective pressure has led to the retention of cellulose-binding domains (CBDs) by hemicellulase enzymes from aerobic bacteria, four new xylanase (xyn) genes from two cellulolytic soil bacteria, Pseudomonas fluorescens subsp. cellulosa and Cellvibrio mixtus, have been isolated and sequenced. Pseudomonas genes xynE and xynF encoded modular xylanases (XYLE and XYLF) with predicted M(r) values of 68,600 and 65000 respectively. XYLE contained a glycosyl hydrolase family 11 catalytic domain at its N-terminus, followed by three other domains; the second of these exhibited sequence identity with NodB from rhizobia. The C-terminal domain (40 residues) exhibited significant sequence identity with a non-catalytic domain of previously unknown function, conserved in all the cellulases and one of the hemicellulases previously characterized from the pseudomonad, and was shown to function as a CBD when fused to the reporter protein glutathione-S-transferase. XYLF contained a C-terminal glycosyl hydrolase family 10 catalytic domain and a novel CBD at its N-terminus. C. mixtus genes xynA and xynB exhibited substantial sequence identity with xynE and xynF respectively, and encoded modular xylanases with the same molecular architecture and, by inference, the same functional properties. In the absence of extensive cross-hybridization between other multiple cel (cellulase) and xyn genes from P. fluorescens subsp. cellulosa and genomic DNA from C. mixtus, similarity between the two pairs of xylanases may indicate a recent transfer of genes between the two bacteria.

A modular xylanase containing a novel non-catalytic xylan-specific binding domain

Xylanase D (XYLD) from Cellulomonas fimi contains a C-terminal cellulose-binding domain (CBD) and an internal domain that exhibits 65% sequence identity with the C-terminal CBD. Full-length XYLD binds to both cellulose and xylan. Deletion of the C-terminal CBD from XYLD abolishes the capacity of the enzyme to bind to cellulose, although the truncated xylanase retains its xylan-binding properties. A derivative of XYLD lacking both the C-terminal CBD and the internal CBD homologue did not bind to either cellulose or xylan. A fusion protein consisting of the XYLD internal CBD homologue linked to the C-terminus of glutathione S-transferase (GST) bound to xylan, but not to cellulose, while GST bound to neither of the polysaccharides. The Km and specific activity of full-length XYLD and truncated derivatives of the enzyme lacking the C-terminal CBD (XYLDcbd), and both the CBD and the internal CBD homologue (XYLDcd), were determined with soluble and insoluble xylan as the substrates. The data showed that the specific activities of the three enzymes were similar for both substrates, as were the Km values for soluble substrate. However, the Km values of XYLD and XYLDcbd for insoluble xylan were significantly lower than the Km of XYLDcd. Overall, these data indicate that the internal CBD homologue in XYLD constitutes a discrete xylan-binding domain which influences the affinity of the enzyme for insoluble xylan but does not directly affect the catalytic activity of the xylanase. The rationale for the evolution of this domain is discussed.

Specificity of an esterase (XYLD) from Pseudomonas fluorescens subsp. cellulosa

Activity of an esterase from Pseudomonas fluorescens subsp. cellulosa (XYLD) on an insoluble feruloylated hemicellulose substrate (de-starched wheat bran) was dependent on the source of added endo-xylanase. The esterase exhibited high selectivity for the nature, position of linkage and size of the feruloylated oligosaccharides generated by hydrolysis of the hemicellulose. Increased affinity of XYLD with increasing size of the oligosaccharide substrate suggests that optimal activity is observed on substrates with at least 4 sugars.

Identification of a novel cellulose-binding domain within the multidomain 120 kDa xylanase XynA of the hyperthermophilic bacterium Thermotoga maritima

A segment of Thermotoga maritima strain MSB8 chromosomal DNA was isolated which encodes an endo-1,4-beta-D-xylanase, and the nucleotide sequence of the xylanase gene, designated xynA, was determined. With a half-life of about 40 min at 90 degrees C at the optimal pH of 6.2, purified recombinant XynA is one of the most thermostable xylanases known. XynA is a 1059-amino-acid (approximately 120 kDa) modular enzyme composed of an N-terminal signal peptide and five domains, in the order A1-A2-B-C1-C2. By comparison with other xylanases of family 10 of glycosyl hydrolases, the central approximately 340-amino-acid part (domain B) of XynA represents the catalytic domain. The N-terminal approximately 150-amino-acid repeated domains (A1-A2) have no significant similarity to the C-terminal approximately 170-amino-acid repeated domains (C1-C2). Cellulose-binding studies with truncated XynA derivatives and hybrid proteins indicated that the C-terminal repeated domains mediate the binding of XynA to microcrystalline cellulose and that C2 alone can also promote cellulose binding. C1 and C2 did not share amino acid sequence similarity with any other known cellulose-binding domain (CBD) and thus are CBDs of a novel type. Structurally related protein segments which are probably also CBDs were found in other multidomain xylanolytic enzymes. Deletion of the N-terminal repeated domains or of all the non-catalytic domains resulted in substantially reduced thermostability while a truncated xylanase derivative lacking the C-terminal tandem repeat was as thermostable as the full-length enzyme.(ABSTRACT TRUNCATED AT 250 WORDS)