Stability of Arthrobacter D-xylose isomerase to denaturants and heat

Structural knowledge or X-ray damage? A case study on xylose isomerase illustrating both

Xylose isomerase (XI) is an industrially important metalloprotein studied for decades. Its reaction mechanism has been postulated to involve movement of the catalytic metal cofactor to several different conformations. Here, a dose-dependent approach was used to investigate the radiation damage effects on XI and their potential influence on the reaction mechanism interpreted from the X-ray derived structures. Radiation damage is still one of the major challenges for X-ray diffraction experiments and causes both global and site-specific damage. In this study, consecutive high-resolution data sets from a single XI crystal from the same wedge were collected at 100 K and the progression of radiation damage was tracked over increasing dose (0.13-3.88 MGy). The catalytic metal and its surrounding amino acid environment experience a build-up of free radicals, and the results show radiation-damage-induced structural perturbations ranging from an absolute metal positional shift to specific residue motions in the active site. The apparent metal movement is an artefact of global damage and the resulting unit-cell expansion, but residue motion appears to be driven by the dose. Understanding and identifying radiation-induced damage is an important factor in accurately interpreting the biological conclusions being drawn.

On the indirect relationship between protein dynamics and enzyme activity

The behaviors of simple thermal systems have been well studied in physical chemistry and the principles obtained from such studies have been applied to complex thermal systems, such as proteins and enzymes. But the simple application of such principles is questionable and may lead to mistakes under some circumstances. In enzymology, the transition state theory of chemical reactions has been accepted as a fundamental theory, but the role of protein dynamics in enzyme catalysis is controversial in the context of transition state theory. By studying behaviors of complex thermal systems, we have revised the Arrhenius equation and transition state theory and our model is validated in enzymology. Formally speaking, the revised Arrhenius equation is apparently similar to a conventional Arrhenius equation, but the physical meanings of its parameters differ from that of traditional forms in principle. Within this model, the role of protein dynamics in enzyme catalysis is well defined and quantified.

Restoration of a defective Lactococcus lactis xylose isomerase

The genes (xylA) encoding xylose isomerase (XI) from two Lactococcus lactis subsp. lactis strains, 210 (Xyl(-)) and IO-1 (Xyl(+)), were cloned, and the activities of their expressed proteins in recombinant strains of Escherichia coli were investigated. The nucleotide and amino acid sequence homologies between the xylA genes were 98.4 and 98.6%, respectively, and only six amino acid residues differed between the two XIs. The purified IO-1 XI was soluble with K(m) and k(cat) being 2.25 mM and 184/s, respectively, while the 210 XI was insoluble and inactive. Site-directed mutagenesis on 210 xylA showed that a triple mutant possessing R202M/Y218D/V275A mutations regained XI activity and was soluble. The K(m) and k(cat) of this mutant were 4.15 mM and 141/s, respectively. One of the IO-1 XI mutants, S388T, was insoluble and showed negligible activity similar to that of 210 XI. The introduction of a K407E mutation to the IO-1 S388T XI mutant restored its activity and solubility. The dissolution of XI activity in L. lactis subsp. lactis involves a series of mutations that collectively eliminate enzyme activity by reducing the solubility of the enzyme.

Glucose isomerase: insights into protein engineering for increased thermostability

Thermostable glucose isomerases are desirable for production of 55% fructose syrups at >90 degrees C. Current commercial enzymes operate only at 60 degrees C to produce 45% fructose syrups. Protein engineering to construct more stable enzymes has so far been relatively unsuccessful, so this review focuses on elucidation of the thermal inactivation pathway as a future guide. The primary and tertiary structures of 11 Class 1 and 20 Class 2 enzymes are compared. Within each class the structures are almost identical and sequence differences are few. Structural differences between Class 1 and Class 2 are less than previously surmised. The thermostabilities of Class 1 enzymes are essentially identical, in contrast to previous reports, but in Class 2 they vary widely. In each class, thermal inactivation proceeds via the tetrameric apoenzyme, so metal ion affinity dominates thermostability. In Class 1 enzymes, subunit dissociation is not involved, but there is an irreversible conformational change in the apoenzyme leading to a more thermostable inactive tetramer. This may be linked to reversible conformational changes in the apoenzyme at alkaline pH arising from electrostatic repulsions in the active site, which break a buried Arg-30-Asp-299 salt bridge and bring Arg-30 to the surface. There is a different salt bridge in Class 2 enzymes, which might explain their varying thermostability. Previous protein engineering results are reviewed in light of these insights.

The structure of rhamnose isomerase from Escherichia coli and its relation with xylose isomerase illustrates a change between inter and intra-subunit complementation during evolution

Using a new expression construct, rhamnose isomerase from Escherichia coli was purified and crystallized. The crystal structure was solved by multiple isomorphous replacement and refined to a crystallographic residual of 17.4 % at 1.6 A resolution. Rhamnose isomerase is a tight tetramer of four (beta/alpha)(8)-barrels. A comparison with other known structures reveals that rhamnose isomerase is most similar to xylose isomerase. Alignment of the sequences of the two enzymes based on their structures reveals a hitherto undetected sequence identity of 13 %, suggesting that the two enzymes evolved from a common precursor. The structure and arrangement of the (beta/alpha)(8)-barrels of rhamnose isomerase are very similar to xylose isomerase. Each enzyme does, however, have additional alpha-helical domains, which are involved in tetramer association, and largely differ in structure. The structures of complexes of rhamnose isomerase with the inhibitor l-rhamnitol and the natural substrate l-rhamnose were determined and suggest that an extended loop, which is disordered in the native enzyme, becomes ordered on substrate binding, and may exclude bulk solvent during catalysis. Unlike xylose isomerase, this loop does not extend across a subunit interface but contributes to the active site of its own subunit. It illustrates how an interconversion between inter and intra-subunit complementation can occur during evolution. In the crystal structure (although not necessarily in vivo) rhamnose isomerase appears to bind Zn(2+) at a "structural" site. In the presence of substrate the enzyme also binds Mn(2+) at a nearby "catalytic" site. An array of hydrophobic residues, not present in xylose isomerase, is likely to be responsible for the recognition of l-rhamnose as a substrate. The available structural data suggest that a metal-mediated hydride-shift mechanism, which is generally favored for xylose isomerase, is also feasible for rhamnose isomerase.

Crystal structures of thermostable xylose isomerases from Thermus caldophilus and Thermus thermophilus: possible structural determinants of thermostability

The crystal structures of highly thermostable xylose isomerases from Thermus thermophilus (TthXI) and Thermus caldophilus (TcaXI), both with the optimum reaction temperature of 90 degrees C, have been determined by X-ray crystallography. The model of TcaXI has been refined to an R-factor of 17.8 % for data extending to 2.3 A and that of TthXI to 17.1 % for data extending to 2.2 A. The tetrameric arrangement of subunits characterized by the 222-symmetry and the tertiary fold of each subunit in both TcaXI and TthXI are basically the same as in other xylose isomerases. Each monomer is composed of two domains. Domain I (residues 1 to 321) folds into the (beta/alpha)8-barrel. Domain II (residues 322 to 387), lacking beta-strands, makes extensive contacts with domain I of an adjacent subunit. Each monomer of TcaXI contains ten beta-strands, 15 alpha-helices, and six 310-helices, while that of TthXI contains ten beta-strands, 16 alpha-helices, and five 310-helices. Although the electron density does not indicate the presence of bound metal ions in the present models of both TcaXI and TthXI, the active site residues show the conserved structural features. In order to understand the structural basis for thermostability of these enzymes, their structures have been compared with less thermostable XIs from Arthrobacter B3728 and Actinoplanes missouriensis (AXI and AmiXI), with the optimum reaction temperatures of 80 degrees C and 75 degrees C, respectively. Analyses of various factors that may affect protein thermostability indicate that the possible structural determinants of the enhanced thermostability of TcaXI/TthXI over AXI/AmiXI are (i) an increase in ion pairs and ion-pair networks, (ii) a decrease in the large inter-subunit cavities, (iii) a removal of potential deamidation/isoaspartate formation sites, and (iv) a shortened loop.

Thermotoga neapolitana homotetrameric xylose isomerase is expressed as a catalytically active and thermostable dimer in Escherichia coli

The xylA gene from Thermotoga neapolitana 5068 was expressed in Escherichia coli. Gel filtration chromatography showed that the recombinant enzyme was both a homodimer and a homotetramer, with the dimer being the more abundant form. The purified native enzyme, however, has been shown to be exclusively tetrameric. The two enzyme forms had comparable stabilities when they were thermoinactivated at 95 degrees C. Differential scanning calorimetry revealed thermal transitions at 99 and 109.5 degrees C for both forms, with an additional shoulder at 91 degrees C for the tetramer. These results suggest that the association of the subunits into the tetrameric form may have little impact on the stability and biocatalytic properties of the enzyme.

The detection of enzyme activity following sodium dodecyl sulfate-polyacrylamide gel electrophoresis

More than a hundred different enzymes impinging on aspects of cell function ranging from carbohydrate and lipid metabolism to signal transduction and gene expression to biomolecule degradation have been detected by the assay of their enzymatic activities following SDS-PAGE. The strategies by which this has been accomplished are as varied as the enzymes themselves and offer testimony to the creativeness and ingenuity of life scientists. Assay of enzyme activity following SDS-PAGE is well adapted to identifying the source of catalytic activity in a heterogeneous protein mixture or a heterooligomeric protein (20), or determining if multiple catalytic activities reside in a single polypeptide (60). The alliance of versatile enzyme assay techniques with the molecular resolution of SDS-PAGE offers a powerful means for meeting the increasing demand for the high-throughput screening arising from protein engineering, combinatorial chemistry, and functional genomics.

Stability and identification of active-site residues of carboxymethylcellulases from Aspergillus niger and Cellulomonas biazotea

Determination of the apparent pKa's of purified carboxymethylcellulases from Aspergillus niger and Cellulomonas biazotea at different temperatures and in the presence of dioxane indicated two side chain carboxyl groups which controlled the limiting rate in both organisms. The thermostability of both enzymes slightly decreased with increasing pH from 5 to 75 but was unaffected in the presence of 0.5 mmol/L Mn2+. The CMCase from C. biazotea had an activation energy of 35 kJ/mol and a half-life of 89 min in the presence of 8 mol/L urea at 40 degrees C. The half-life of CMCase from A. niger in 8 mol/L urea and at 37 degrees C was 125 min as determined by a 0-9 mol/L transverse urea gradient PAGE. The CMCases from A. niger and C. biazotea had the same thermostabilities in the absence of CMC although the enzyme from the former was more thermostable in the presence of the substrate. The CMCase from A. niger was also more efficient in hydrolyzing CMC than the enzyme from C. biazotea.

Role of electrostatics at the catalytic metal binding site in xylose isomerase action: Ca(2+)-inhibition and metal competence in the double mutant D254E/D256E

The catalytic metal binding site of xylose isomerase from Arthrobacter B3728 was modified by protein engineering to diminish the inhibitory effect of Ca2+ and to study the competence of metals on catalysis. To exclude Ca2+ from Site 2 a double mutant D254E/D256E was designed with reduced space available for binding. In order to elucidate structural consequences of the mutation the binary complex of the mutant with Mg2+ as well as ternary complexes with bivalent metal ions and the open-chain inhibitor xylitol were crystallized for x-ray studies. We determined the crystal structures of the ternary complexes containing Mg2+, Mn2+, and Ca2+ at 2.2 to 2.5 A resolutions, and refined them to R factors of 16.3, 16.6, and 19.1, respectively. We found that all metals are liganded by both engineered glutamates as well as by atoms O1 and O2 of the inhibitor. The similarity of the coordination of Ca2+ to that of the cofactors as well as results with Be2+ weaken the assumption that geometry differences should account for the catalytic noncompetence of this ion. Kinetic results of the D254E/D256E mutant enzyme showed that the significant decrease in Ca2+ inhibition was accompanied by a similar reduction in the enzymatic activity. Qualitative argumentation, based on the protein electrostatic potential, indicates that the proximity of the negative side chains to the substrate significantly reduces the electrostatic stabilization of the transition state. Furthermore, due to the smaller size of the catalytic metal site, no water molecule, coordinating the metal, could be observed in ternary complexes of the double mutant. Consequently, the proton shuttle step in the overall mechanism should differ from that in the wild type. These effects can account for the observed decrease in catalytic efficiency of the D254E/D256E mutant enzyme.

Molecular and industrial aspects of glucose isomerase

Glucose isomerase (GI) (D-xylose ketol-isomerase; EC. 5.3.1.5) catalyzes the reversible isomerization of D-glucose and D-xylose to D-fructose and D-xylulose, respectively. The enzyme has the largest market in the food industry because of its application in the production of high-fructose corn syrup (HFCS). HFCS, an equilibrium mixture of glucose and fructose, is 1.3 times sweeter than sucrose and serves as a sweetener for use by diabetics. Interconversion of xylose to xylulose by GI serves a nutritional requirement in saprophytic bacteria and has a potential application in the bioconversion of hemicellulose to ethanol. The enzyme is widely distributed in prokaryotes. Intensive research efforts are directed toward improving its suitability for industrial application. Development of microbial strains capable of utilizing xylan-containing raw materials for growth or screening for constitutive mutants of GI is expected to lead to discontinuation of the use of xylose as an inducer for the production of the enzyme. Elimination of Co2+ from the fermentation medium is desirable for avoiding health problems arising from human consumption of HFCS. Immobilization of GI provides an efficient means for its easy recovery and reuse and lowers the cost of its use. X-ray crystallographic and genetic engineering studies support a hydride shift mechanism for the action of GI. Cloning of GI in homologous as well as heterologous hosts has been carried out, with the prime aim of overproducing the enzyme and deciphering the genetic organization of individual genes (xylA, xylB, and xylR) in the xyl operon of different microorganisms. The organization of xylA and xylB seems to be highly conserved in all bacteria. The two genes are transcribed from the same strand in Escherichia coli and Bacillus and Lactobacillus species, whereas they are transcribed divergently on different strands in Streptomyces species. A comparison of the xylA sequences from several bacterial sources revealed the presence of two signature sequences, VXW(GP)GREG(YSTAE)E and (LIVM)EPKPX(EQ)P. The use of an inexpensive inducer in the fermentation medium devoid of Co2+ and redesigning of a tailor-made GI with increased thermostability, higher affinity for glucose, and lower pH optimum will contribute significantly to the development of an economically feasible commercial process for enzymatic isomerization of glucose to fructose. Manipulation of the GI gene by site-directed mutagenesis holds promise that a GI suitable for biotechnological applications will be produced in the foreseeable future.

Molecular and industrial aspects of glucose isomerase

Glucose isomerase (GI) (D-xylose ketol-isomerase; EC. 5.3.1.5) catalyzes the reversible isomerization of D-glucose and D-xylose to D-fructose and D-xylulose, respectively. The enzyme has the largest market in the food industry because of its application in the production of high-fructose corn syrup (HFCS). HFCS, an equilibrium mixture of glucose and fructose, is 1.3 times sweeter than sucrose and serves as a sweetener for use by diabetics. Interconversion of xylose to xylulose by GI serves a nutritional requirement in saprophytic bacteria and has a potential application in the bioconversion of hemicellulose to ethanol. The enzyme is widely distributed in prokaryotes. Intensive research efforts are directed toward improving its suitability for industrial application. Development of microbial strains capable of utilizing xylan-containing raw materials for growth or screening for constitutive mutants of GI is expected to lead to discontinuation of the use of xylose as an inducer for the production of the enzyme. Elimination of Co2+ from the fermentation medium is desirable for avoiding health problems arising from human consumption of HFCS. Immobilization of GI provides an efficient means for its easy recovery and reuse and lowers the cost of its use. X-ray crystallographic and genetic engineering studies support a hydride shift mechanism for the action of GI. Cloning of GI in homologous as well as heterologous hosts has been carried out, with the prime aim of overproducing the enzyme and deciphering the genetic organization of individual genes (xylA, xylB, and xylR) in the xyl operon of different microorganisms. The organization of xylA and xylB seems to be highly conserved in all bacteria. The two genes are transcribed from the same strand in Escherichia coli and Bacillus and Lactobacillus species, whereas they are transcribed divergently on different strands in Streptomyces species. A comparison of the xylA sequences from several bacterial sources revealed the presence of two signature sequences, VXW(GP)GREG(YSTAE)E and (LIVM)EPKPX(EQ)P. The use of an inexpensive inducer in the fermentation medium devoid of Co2+ and redesigning of a tailor-made GI with increased thermostability, higher affinity for glucose, and lower pH optimum will contribute significantly to the development of an economically feasible commercial process for enzymatic isomerization of glucose to fructose. Manipulation of the GI gene by site-directed mutagenesis holds promise that a GI suitable for biotechnological applications will be produced in the foreseeable future.

The stability of extracellular beta-glucosidase from Aspergillus niger is significantly enhanced by non-covalently attached polysaccharides

The removal of noncovalently bound polysaccharide coating from the extracellular enzymes of Aspergillus niger, by the technique of compartmental electrophoresis, had a very dramatic effect on the stability of beta-glucosidase. The polysaccharide-beta-glucosidase complex was extremely resistant to proteinases and far more stable against urea and temperature as compared with polysaccharide-free beta-glucosidase. The beta-glucosidase-polysaccharide complex was 18-, 36-, 40- and 82-fold more stable against chymotrypsin, 3 mol/L urea, total thermal denaturation and irreversible thermal denaturation, respectively, as compared with polysaccharide-free beta-glucosidase. The activation energy of polysaccharide-complexed beta-glucosidase (55 kJ/mol) was lower than polysaccharide-free enzyme (61 kJ/mol), indicating a slight activation of the enzyme by the polysaccharide. No significant difference could be detected in the specificity constant (V/K(m)) for A-nitrophenyl beta-D-glucopyranoside between polysaccharide-free and polysaccharide-complexed beta-glucosidase. We suggest that the function of these polysaccharides secreted by fungi including A. niger might be to protect the extracellular enzymes from proteolytic degradation, hence increasing their life span.

Arthrobacter D-xylose isomerase: chemical modification of carboxy groups and protein engineering of pH optimum

To try to lower the pH optimum, the carboxy groups of Arthrobacter D-xylose isomerase were coupled to glycinamide using a water-soluble carbodi-imide. In conditions that substituted all of the 59 carboxy groups in the denatured monomer, a maximum of 30 groups/monomer reacted in the native enzyme, whether in presence or absence of ligands, and the enzyme remained fully active and tetrameric throughout the coupling reaction. Purification by f.p.l.c. ion-exchange chromatography gave broad symmetrical peaks with increased pI, suggesting that the modified enzymes are essentially homogeneous. However, they are less stable than native enzyme in 8 M urea or on heating ('melting points' of 59 degrees versus 73 degrees C for the apoenzymes and 67 degrees versus 81.5 degrees C for the Mg(2+)-enzymes). Kinetic studies of the D-fructose isomerase activity at 30 degrees C showed that the glycinamidylated enzyme had unaltered activation constant for Mg2+, and Km was also similar to that of the native enzyme at pH 7.3, but increased rapidly at higher pH rather than remaining constant. Vmax. was constant from pH 6.2 to 8.0, suggesting a reduced pKa for His-219, which controls Vmax. in the native enzyme (normally 6.0). Three mutants were constructed by protein engineering with a view to reducing the pH optimum of enzyme activity. Two of these, Glu140-->Lys and Asp189-->Lys, could be detected in crude extracts of Escherichia coli by SDS/PAGE, but could not be purified, whereas mutant Trp136-->Glu was produced as a tetramer in amounts similar to the wild-type enzyme. However, it did not show any enzyme activity and was less stable in 0-9 M urea gradient PAGE.

Arthrobacter D-xylose isomerase: protein-engineered subunit interfaces

Mutants of Arthrobacter D-xylose isomerase were constructed in which one or two disulphide bridges or additional salt bridges were introduced at the A-A* subunit interfaces. These showed no change in enzyme activity or stability compared with the wild-type enzyme. However, a Tyr253 mutant in which a disulphide bridge was introduced at the A-B* subunit interface showed reduced thermostability that was identical in both oxidized and reduced forms, and also reduced stability in urea. X-ray-crystallographic analysis of the Mn(2+)-xylitol form of oxidized Y253C (the Tyr253-->Cys mutant) showed a changed conformation of Glu185 and also alternative conformations for Asp254, which is a ligand to the Site-[2] metal ion. With fructose, Mg(2+)-Y253C has a similar Km to that of the wild-type, and its Vmax. is also similar below pH 6.4, but declined thereafter. In the presence of Co2+, Y253C has lower activity than wild-type at all pH values, but its activity also declines at alkaline pH. These results suggest that electrostatic repulsion from the new position of Glu185 causes Asp254 to move when His219 is unprotonated, thereby preventing M2+ binding at Site [2]. These results also suggest that subunit dissociation does not lie on the pathway of thermal inactivation of D-xylose isomerase, but that movements of active-site groups are a trigger for conformational changes that initiate the unfolding process.