Antimicrobial mechanism of action of surfactant lipid preparations in enteric Gram-negative bacilli

Effect of cationic surfactant on the physicochemical and antibacterial properties of colloidal systems (emulsions and microemulsions)

Colloidal systems have been used to encapsulate, protect and release essential oils in mouthwashes. In this study, we investigated the effect of cetylpyridinium chloride (CPC) on the physicochemical properties and antimicrobial activity of oil-in-water colloidal systems containing tea tree oil (TTO) and the nonionic surfactant polysorbate 80. Our main aim was to evaluate whether CPC could improve the antimicrobial activity of TTO, since this activity is impaired when this essential oil is encapsulated with polysorbate 80. These systems were prepared with different amounts of TTO (0-0.5% w/w) and CPC (0-0.5% w/w), at a final concentration of 2% (w/w) polysorbate 80. Dynamic light scattering (DLS) results revealed the formation of oil-swollen micelles and oil droplets as a function of TTO concentration. Increases in CPC concentrations led to a reduction of around 88% in the mean diameter of oil-swollen micelles. Although this variation was of only 20% for the oil droplets, the samples appearance changed from turbid to transparent. The surface charge of colloidal structures was also markedly affected by the CPC as demonstrated by the transition in zeta potential from slightly negative to highly positive values. Electron paramagnetic resonance (EPR) studies showed that this transition is followed by significant increases in the fluidity of surfactant monolayer of both colloidal structures. The antimicrobial activity of colloidal systems was tested against a Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureaus) bacteria. Our results revealed that the inhibition of bacterial growth is observed for the same CPC concentration (0.05% w/w for E. coli and 0.3% w/w for S. aureus) regardless of TTO content. These findings suggest that TTO may not act as an active ingredient in polysorbate 80 containing mouthwashes.

Optimization and bio-fabrication of phyto-mediated silver nanoparticles (Ag-NPs) for antibacterial potential

This report examines the bio-fabrication of silver nanoparticles (Ag-NPs) utilizing AgNO3 and leaf extract of Crataegus monogyna as the precursor material. In order to maximize the antibacterial efficacy against Staphylococcus aureus, Proteus mirabilis, Klebsiella pneumoniae and Pseudomonas aeruginosa, the reaction conditions for the green fabrication of Ag-NPs were optimized. A one factor at a time approach (volume concentration of extract, volume concentration of AgNO3, pH and temperature) was used to optimize the best condition, and results were assessed through UV-visible spectroscopy and particle size distribution. The results showed that 20 mL of plant extract, 80 mL of AgNO3, pH 08, 100 °C temperature were the optimum reaction conditions under which we obtained the smallest Ag-NPs (7 nm). The scanning electron microscopy and X-ray diffraction analysis confirmed the spherical and crystalline nature of Ag-NPs. The antibacterial activity assay demonstrated a high antibacterial effect of Ag-NPs against S. aureus, P. mirabilis, K. pneumoniae and P. aeruginosa, and that impact was greater with smaller-sized nanoparticles (7 nm). This study shows that leaf extract of C. monogyna is a possible medium for the green fabrication of Ag-NPs, and control over reaction factors can establish the characteristics and antibacterial effectiveness of Ag-NPs.Communicated by Ramaswamy H. Sarma.

Biosynthesis of Functional Silver Nanoparticles Using Callus and Hairy Root Cultures of Aristolochia manshuriensis

This study delves into the novel utilization of Aristolochia manshuriensis cultured cells for extracellular silver nanoparticles (AgNPs) synthesis without the need for additional substances. The presence of elemental silver has been verified using energy-dispersive X-ray spectroscopy, while distinct surface plasmon resonance peaks were revealed by UV-Vis spectra. Transmission and scanning electron microscopy indicated that the AgNPs, ranging in size from 10 to 40 nm, exhibited a spherical morphology. Fourier-transform infrared analysis validated the abilty of A. manshuriensis extract components to serve as both reducing and capping agents for metal ions. In the context of cytotoxicity on embryonic fibroblast (NIH 3T3) and mouse neuroblastoma (N2A) cells, AgNPs demonstrated varying effects. Specifically, nanoparticles derived from callus cultures exhibited an IC50 of 2.8 µg/mL, effectively inhibiting N2A growth, whereas AgNPs sourced from hairy roots only achieved this only at concentrations of 50 µg/mL and above. Notably, all studied AgNPs' treatment-induced cytotoxicity in fibroblast cells, yielding IC50 values ranging from 7.2 to 36.3 µg/mL. Furthermore, the findings unveiled the efficacy of the synthesized AgNPs against pathogenic microorganisms impacting both plants and animals, including Agrobacterium rhizogenes, A. tumefaciens, Bacillus subtilis, and Escherichia coli. These findings underscore the effectiveness of biotechnological methodologies in offering advanced and enhanced green nanotechnology alternatives for generating nanoparticles with applications in combating cancer and infectious disorders.

Biopolymer Coating Imparts Sustainable Self-Disinfecting and Antimicrobial Properties to Fabric: Translated to Protective Gears for the Pandemic and Beyond

The global pandemic of COVID-19 and emerging antimicrobial drug resistance highlights the need for sustainable technology that enables more preparedness and active control measures. It is thus important to have a reliable solution to avert the present situations as well as preserve nature for habitable life in the future. One time use of PPE kits is promoting the accumulation of nondegradable waste, which may pose an unforeseen challenge in the future. We have developed a biocompatible, biodegradable, and nonirritating nanoemulsion coating for textiles. The study focused on coating cotton fabric to functionalize it with broad spectrum antimicrobial, antibiofilm, and anti-SARS-CoV-2 activity. The nanoemulsion comprises spherical particles of chitosan, oleic acid, and eugenol that are cross-linked to fibers. The nanoemulsion caused complete destruction of pathogens even for the most rigid biofilms formed by drug resistant Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans on the surface of the coated fabric. The secondary coat with beeswax imparts super hydrophobicity and 20 wash cycle resistance and leads to enhanced barrier properties with superior particulate filtration, bacterial filtration, and viral penetration efficiency as compared to an N95 respirator. The coated fabric qualifies as per standard parameters like breathability, flammability, splash resistance, and filtration efficiency for submicrometer particles, bacteria, and viruses. The scaleup and bulk manufacturing of the coating technology on fabric masks complied with standards. The consumer feedback rated the coated mask with high scores in breathability and comfortability as compared to an N95. The strategy promises to provide a long-term sustainable model compared to single use masks and PPE that will remain a nondegradable burden on the ecosystem for years to come.

Nanotechnology: a contemporary therapeutic approach in combating infections from multidrug-resistant bacteria

In the 20th century, the discovery of antibiotics played an essential role in the fight against infectious diseases, including meningitis, typhoid fever, pneumonia and Mycobacterium tuberculosis. The development of multidrug resistance in microflora due to improper antibiotic use created significant public health issues. Antibiotic resistance has increased at an alarming rate in the past few decades. Multidrug-resistant bacteria (superbugs) such as methicillin-resistant Staphylococcus aureus (MRSA) as well as drug-resistant tuberculosis pose serious health implications. Despite the continuous increase in resistant microbes, the discovery of novel antibiotics is constrained by the cost and complexities of discovery of drugs. The nanotechnology has given new hope in combating this problem. In the present review, recent developments in therapeutics utilizing nanotechnology for novel antimicrobial drug development are discussed. The nanoparticles of silver, gold and zinc oxide have proved to be efficient antimicrobial agents against multidrug-resistant Klebsiella, Pseudomonas, Escherichia Coli and MRSA. Using nanostructures as carriers for antimicrobial agents provides better bioavailability, less chances of sub-therapeutic drug accumulation and less drug-related toxicity. Nanophotothermal therapy using fullerene and antibody functionalized nanostructures are other strategies that can prove to be helpful.

Alteration of Cell Membrane Permeability by Cetyltrimethylammonium Chloride Induces Cell Death in Clinically Important Candida Species

The increased incidence of healthcare-related Candida infection has necessitated the use of effective disinfectants/antiseptics in healthcare settings as a preventive measure to decontaminate the hospital environment and stop the persistent colonization of the offending pathogens. Quanternary ammonium surfactants (QASs), with their promising antimicrobial efficacy, are considered as intriguing and appealing candidates for disinfectants. From this perspective, the present study investigated the antifungal efficacy and action mechanism of the QAS cetyltrimethylammonium chloride (CTAC) against three clinically important Candida species: C. albicans, C. tropicalis, and C. glabrata. CTAC exhibited phenomenal antifungal activity against all tested Candida spp., with minimum inhibitory concentrations (MIC) and minimum fungicidal concentrations (MFC) between 2 and 8 µg/mL. The time−kill kinetics of CTAC (at 2XMIC) demonstrated that an exposure time of 2 h was required to kill 99.9% of the inoculums in all tested strains. An important observation was that CTAC treatment did not influence intracellular reactive oxygen species (ROS), signifying that its phenomenal anticandidal efficacy was not mediated via oxidative stress. In addition, sorbitol supplementation increased CTAC’s MIC values against all tested Candida strains by three times (8−32 μg/mL), indicating that CTAC’s possible antifungal activity involves fungus cell membrane destruction. Interestingly, the increased fluorescence intensity of CTAC-treated cells in both propidium iodide (PI) and DAPI staining assays indicated the impairment of cell plasma membrane and nuclear membrane integrity by CTAC, respectively. Additionally, CTAC at MIC and 2XMIC was sufficient (>80%) to disrupt the mature biofilms of all tested spp., and it inhibited the yeast-to-hyphae transition at sub-MIC in C. albicans. Finally, the non-hemolytic activity of CTAC (upto 32 µg/mL) in human blood cells and HBECs signified its non-toxic nature at the investigated concentrations. Furthermore, thymol and citral, two phytocompounds, together with CTAC, showed synergistic fungicidal effectiveness against C. albicans planktonic cells. Altogether, the data of the present study appreciably broaden our understanding of the antifungal action mechanism of CTAC and support its future translation as a potential disinfectant against Candida-associated healthcare infections.

Silver Nanoparticles Produced by Laser Ablation and Re-Irradiation Are Effective Preventing Peri-Implantitis Multispecies Biofilm Formation

Implant-associated infection due to biofilm formation is a growing problem. Given that silver nanoparticles (Ag-NPs) have shown antibacterial effects, our goal is to study their effect against multispecies biofilm involved in the development of peri-implantitis. To this purpose, Ag-NPs were synthesized by laser ablation in de-ionized water using two different lasers, leading to the production of colloidal suspensions. Subsequently, part of each suspension was subjected to irradiation one and three times with the same laser source with which it was obtained. Ag-NPs were immobilized on the surface of titanium discs and the resultant materials were compared with unmodified titanium coupons. Nanoparticles were physico-chemically analysed to determine their shape, crystallinity, chemical composition, and mean diameter. The materials were incubated for 90 min or 48 h, to evaluate bacterial adhesion or biofilm formation respectively with Staphylococcus aureus or oral mixed bacterial flora composed of Streptococcus oralis, Actinomyces naeslundii, Veionella dispar, and Porphyromonas gingivalis. Ag-NPs help prevent the formation of biofilms both by S. aureus and by mixed oral bacterial flora. Nanoparticles re-irradiated three times showed the biggest antimicrobial effects. Modifying dental implants in this way could prevent the development of peri-implantitis.

Biosynthesis of silver nanoparticles using extract of Rumex nepalensis for bactericidal effect against food-borne pathogens and antioxidant activity

The evolution and incidence of multidrug-resistant food-borne pathogens still become a critical public health global issue. To avert this challenge there is great interest in medical applications of silver nanoparticles. Thus, this study aimed to synthesize silver nanoparticles (Rn-AgNPs) using aqueous leaf extract of Nepal Dock (Rumex nepalensis Spreng) and evaluate their antibacterial potential against food-borne pathogens and antioxidant activity. The Rn-AgNPs were characterized by UV-Vis spectrophotometry, Dynamic Light Scattering (DLS), Scanning Electron Microscopy (SEM), and Fourier Transform Infra-Red Spectroscopy (FTIR). The antibacterial activities of the Rn-AgNPs were evaluated using agar well diffusion (zone of inhibition, ZOI) and microdilution (minimum inhibitory concentration, MIC and minimum bactericidal concentration, MBC) methods. The antioxidant property of the Rn-AgNPs was investigated using radical scavenging (DPPH and hydroxyl) assays. The UV-Vis spectra of Rn-AgNPs elucidated the absorption maxima at 425 nm and FTIR detected numerous functional groups of biological compounds that are responsible for capping and stabilizing Rn-AgNPs. DLS analysis displayed monodispersed Rn-AgNPs of 86.7 nm size and highly negative zeta potential (-32.5 mV). Overall results showed that Escherichia coli was the most sensitive organism, whereas Staphylococcus aureus was the least sensitive against Rn-AgNPs. In the antioxidant tests, the AgNPs radical scavenging activity reached 95.44% at 100 μg/ml. This study indicates that Rn-AgNPs exhibit a strong antimicrobial on L. monocytogenes, S. aureus, S. typhimurium, and E. coli and antioxidant and thus might be developed as a new type of antimicrobial agent for the treatment of multidrug-resistant foodborne pathogens and extensible applications in nanomaterial food- and nanocomposite-based antimicrobial packaging and/or as an antioxidant.

Medicinal plants mediated the green synthesis of silver nanoparticles and their biomedical applications

The alarming effect of antibiotic resistance prompted the search for alternative medicine to resolve the microbial resistance conflict. Over the last two decades, scientists have become increasingly interested in metallic nanoparticles to discover their new dimensions. Green nano synthesis is a rapidly expanding field of interest in nanotechnology due to its feasibility, low toxicity, eco‐friendly nature, and long‐term viability. Some plants have long been used in medicine because they contain a variety of bioactive compounds. Silver has long been known for its antibacterial properties. Silver nanoparticles have taken a special place among other metal nanoparticles. Silver nanotechnology has a big impact on medical applications like bio‐coating, novel antimicrobial agents, and drug delivery systems. This review aims to provide a comprehensive understanding of the pharmaceutical qualities of medicinal plants, as well as a convenient guideline for plant‐based silver nanoparticles and their antimicrobial activity.

Influence of surface electric charge of Ti implants on osteoblastic interaction: A systematic review

Objective

A critical analysis of the existing literature to answer “What is the influence of electrical charge of titanium alloys in the electrical interaction with osteoblastic cells for osseointegration?”.

Design

This systematic review followed PRISMA. The personalized search strategy was applied in PubMed, Science Direct, Embase, and Scopus databases, furthermore, in the grey literature in the Google Scholar and ProQuest. The selection process was carried out in two stages independently by two reviewers according to the eligibility criteria. The risk of bias was also analyzed.

Results

When applying the search strategy, 306 articles were found, after removing duplicates 277 were analyzed by title and abstract, of which 33 were selected for full reading, of which 10 met the eligibility criteria. And one was included from the additional literature search. Of these, all had a low risk of bias.

Conclusions

1. The phenomenon of osseointegration is complex and, independent of the superficial electrical charge of the implant, it may occur. To understand osseointegration, attention must be paid to the synergistic action of the electrical potential; chemical composition, intrinsic to the alloy and from surface treatment; and topography, which will determine the speed of adhesion, proliferation, and osteoblast differentiation. 2. The presence of Ca2+ deposited on the surface acts as a driving force for biomineralization that induces osteoblastic attraction and differentiation; 3. For a better understanding of the current literature, more studies are needed to describe the osteogenic regulation process through protein mediation; 4. Topography and chemical composition act as decisive parameters for cell viability independent of the attractive electrical charge.

Multidrug resistance from a one health perspective in Ethiopia: A systematic review and meta-analysis of literature (2015–2020)

Purpose

The emergence of antimicrobial resistance is a major global health challenge and becoming an urgent priority for policymakers. There is a paucity of scientific studies presenting the multidrug resistance pattern from one health perspective in Ethiopia. Therefore, a systematic review and meta-analysis aimed to determine the pooled prevalence of multidrug resistance in bacteria from human, animal, food, and environmental sources.

Methods

In this systematic review and meta-analysis, an electronic search was made in PubMed & Google scholar using different keywords. The studies conducted in all areas of Ethiopia, published from 2015 to 2020 in peer-reviewed journals, English full-length papers were included. The meta-analysis was done on STATA version 14. The pooled prevalence of multidrug resistance for each bacterium was analysed using the random-effects model; Cochran Q statistics and the I² statistic was used to analyse heterogeneity and considered significant at p < 0.01.

Results

81 studies were included in the systematic review and meta-analysis; 53 human studies, eight animal studies, and 16 environments/food studies. The meta-analysis included six species from gram-positive bacteria and 13 from gram-negative bacteria. S. aureus 53% (95%CI: 42–64%), Coagulase negative Staphylococci 68%(95%CI:53–82), Pseudomonas spp. 73%(95%CI:48–93%), E. coli 70% (95%CI:61–78%), Citrobacter spp. 71%(95%CI:54–87%), Klebsiella spp. 68% (54–80%), Enterobacter spp. 67% (48–83%) and Salmonella spp. 65% (95%CI:48–81%) were the common multidrug-resistant species of bacteria from two or more sources.

Conclusion

In Ethiopia, the pooled prevalence of MDR is high in most bacterial species from humans, animals, food, and environmental sources. Staphylococcus, most members of the Enterobacteriaceae and Pseudomonas, are the standard MDR bacterial population involving all sources. Therefore, integrated policy and intervention measures should be implemented to reduce the emergence and spread of MDR bacteria for better animal and human health outcomes.

Investigation of Antimicrobial and Cytotoxic Properties and Specification of Silver Nanoparticles (AgNPs) Derived From Cicer arietinum L. Green Leaf Extract

Using biological materials to synthesize metallic nanoparticles has become a frequently preferred method by researchers. This synthesis method is both fast and inexpensive. In this study, an aqueous extract obtained from chickpea (Cicer arietinum L.) (CA) leaves was used in order to synthesize silver nanoparticles (AgNPs). For specification of the synthesized AgNPs, UV-vis spectrophotometer, Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction analysis (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), electron dispersive X-ray (EDX), and zeta potential (ZP) analyses data were used. Biologically synthesized AgNPs demonstrated a maximum surface plasmon resonance of 417.47 nm after 3 h. With the powder XRD model, the mean crystallite dimension of nanoparticles was determined as 12.17 mm with a cubic structure. According to the TEM results, the dimensions of the obtained silver nanoparticles were found to be 6.11–9.66 nm. The ZP of the electric charge on the surface of AgNPs was measured as −19.6 mV. The inhibition effect of AgNPs on food pathogen strains and yeast was determined with the minimum inhibition concentration (MIC) method. AgNPs demonstrated highly effective inhibition at low concentrations especially against the growth of B. subtilis (0.0625) and S. aureus (0.125) strains. The cytotoxic effects of silver nanoparticles on cancerous cell lines (CaCo-2, U118, Sk-ov-3) and healthy cell lines (HDF) were revealed. Despite the increase of AgNPs used against cancerous and healthy cell lines, no significant decrease in the percentage of viability was detected.

Di-anionic self-associating supramolecular amphiphiles (SSAs) as antimicrobial agents against MRSA and Escherichia coli

Herein, we report a series of di-anionic supramolecular self-associating amphiphiles (SSAs). We elucidate the antimicrobial properties of these SSAs against both methicillin resistant Staphylococcus aureus and Escherichia coli. In addition, we show this class of compound to form both intra- and intermolecular hydrogen bonded macrocyclic structures in the solid state.

Heads or tails? The synthesis, self-assembly, properties and uses of betaine and betaine-like surfactants

Betaines are a key class of zwitterionic surfactant that exhibit particularly favorable properties, making them indispensable in modern formulation. Due to their composition, betaines are readily biodegradable, mild on the skin and exhibit some antimicrobial activity. Vital to their function, these surfactants self-assemble into diverse micellar geometries, some of which contribute to increased solution viscosity, and their surface activity results in strong detergency and foaming. As such, their behavior has been exploited in various applications from personal care (including shampoos and liquid soaps) to specific industrial fields (such as enhanced oil recovery). This review aims to inform the reader of the diverse range of different betaine and betaine-like surfactants that have been actively researched over the past three decades. Synthesis as well as both chemical and physical characterization of betaine surfactants are discussed, including small-angle scattering studies that indicate self-assembly structures and rheological data that demonstrates texture and flow. Stimulus responsive systems and exotic betaine analogs with enhanced functionality are also covered. Crucially, the connection between surfactant molecular architecture and function are highlighted, exemplifying precisely why zwitterionic betaine and related surfactants are so uniquely functional.

Evaluation of Antimicrobial Potential and Comparison of HPLC Composition, Secondary Metabolites Count, and Antioxidant Activity of Mentha rotundifolia and Mentha pulegium Extracts

In the present study, the relationship between the phenolic counts, chemical composition, and biological activities of two Mentha species (Mentha rotundifolia (MR) and Mentha pulegium (MP)) was analyzed. The characterization of the action mode against pathogenic bacteria and the inhibition of spore germination of two fungal species using prepared methanolic extracts were studied here for the first time. The obtained data highlighted the presence of positive correlation between the secondary metabolites contents and the biological activities of the investigated extracts. In fact, HPLC analysis showed that the major components in both the extracts were eriocitrin and rosmarinic acid (25 and 20 mg/ml and 12 and 8 mg/ml in methanolic extracts of MR and MP, respectively). Moreover, the MR extract was rich in polyphenols and presents the highest antioxidant activity than MP ones. In addition, both extracts possess an antimicrobial activity against four Gram-positive and five Gram-negative bacteria and one yeast species (Candida albicans) and were able to inhibit the spore germination of two fungi species (Aspergillus niger and Aspergillus flavus). But, the significant activity was observed in the presence of MR methanolic extract. The effect of time on cell integrity of E. coli and L. monocytogenes determined by time-kill and bacteriolysis assays showed that the MR extract had a rapid bacteriolytic effect compared to the MP extract, and their capacities were significant against Gram-negative bacteria than positive ones. Based on the obtained data, it can be concluded that Saudi Mentha species have high pharmacological and industrial importance and they can be used in preparation of food or drugs.

HPLC-Analysis, Biological Activities and Characterization of Action Mode of Saudi Marrubium vulgare against Foodborne Diseases Bacteria

The present study aims to evaluate the chemical composition, metabolites secondary and pharmacology activities of methanolic extract of Marrubium vulgare collected from King Saudi Arabia. Moreover, the primary mode of action of the tested extract was studied here for the first time against E. coli and L. monocytogenes. HPLC analysis shows that the major components in the tested extract are luteolin-7-O-d-glucoside, ferulic acid and premarrubiin. Obtained data demonstrated that the investigated extract was richer in phenol (26.8 ± 0.01 mg/GAE g) than in flavonoids (0.61 ± 0.05 mg EC/mL). In addition, the methanolic extract showed an important antioxidant capacity against the DPPH (IC₅₀ = 35 ± 0.01 µg/mL) and ABTS (IC₅₀ = 25 ± 0.2 µg/mL) radical scavenging and a strong inhibition of acetylcholinesterase enzyme with an IC₅₀ value corresponding to 0.4 mg/mL. The antibacterial activity demonstrated that the evaluated extract had significant activity against both Gram-positive and Gram-negative bacteria. The effect of time on cell integrity on E. coli and L. monocytogenes determined by time-kill and bacteriolysis tests showed that the M. vulgare extract reduced the viability of both strains after 8 and 10 h and had a bacteriolytic effect against two different categories of bacteria, Gram-positive and negative, which are not of the same potency. Based on obtained data, it can be concluded that Saudi M. vulgare has a high pharmacological importance and can be used in preparation of food or drugs.

Lipid engineered nanoparticle therapy for burn wound treatment

INTRODUCTION

Skin is the largest organ of the human body protecting the underlying organs and tissues from any foreign attack. Any damage caused in the skin may sometimes result in serious consequences within the internal body tissues. Burn is one such issue that damage the layers of skin and thereby makingthe skin vulnerableand pronefor any foreign matter to enter and cause serious diseases.

METHODS

An online literature assessment was steered for the lipid nanoparticles, burn wound treatments, and different types of nanoformulation. Appropriate information was taken from different electronic scientific databases such as Web of Science, Elsevier, Science Direct, Springer, PubMed, Google Scholar etc.,Additional data was summarized from textbooks, local prints and scripts.

RESULTS

Recent innovations and developments in nanotechnology-based drug delivery systems has shown promising results in minimizing the drawbacks associated with conventional therapies. Lipid based nanoparticles possess capabilities to deliver active agents to their target site without the possibility of degradation. Conventional therapy of burn wound is costly and the treatment is long lasting, making the patient uncomfortable. Moreover, italso doesn't yield satisfactory results or narrow effects.Encapsulation of bioactives inside the lipid core protects the active entity from pH and enzymatic degradations.

CONCLUSION

This review highlights the drawbacks associated with the conventional dosage forms. A lot of consideration is focused on the advancement of nanomaterials using innovative methods in wound care for treating burn wounds with the faster healing effect.This review article highlights recent developments in lipid based nanoformulations for treatment of burn wound injury.

Biodirected Synthesis of Silver Nanoparticles Using Aqueous Honey Solutions and Evaluation of Their Antifungal Activity against Pathogenic Candida Spp

Silver nanoparticles (AgNPs) were synthesized using aqueous honey solutions with a concentration of 2%, 10%, and 20%-AgNPs-H2, AgNPs-H10, and AgNPs-H20. The reaction was conducted at 35 °C and 70 °C. Additionally, nanoparticles obtained with the citrate method (AgNPs-C), while amphotericin B (AmB) and fluconazole were used as controls. The presence and physicochemical properties of AgNPs was affirmed by analyzing the sample with ultraviolet-visible (UV-Vis) and fluorescence spectroscopy, scanning electron microscopy (SEM), and dynamic light scattering (DLS). The 20% honey solution caused an inhibition of the synthesis of nanoparticles at 35 °C. The antifungal activity of the AgNPs was evaluated using opportunistic human fungal pathogens Candida albicans and Candida parapsilosis. The antifungal effect was determined by the minimum inhibitory concentration (MIC) and disc diffusion assay. The highest activity in the MIC tests was observed in the AgNPs-H2 variant. AgNPs-H10 and AgNPs-H20 showed no activity or even stimulated fungal growth. The results of the Kirby-Bauer disc diffusion susceptibility test for C. parapsilosis strains indicated stronger antifungal activity of AgNPs-H than fluconazole. The study demonstrated that the antifungal activity of AgNPs is closely related to the concentration of honey used for the synthesis thereof.

Nanotechnology-based lipid systems applied to resistant bacterial control: A review of their use in the past two decades

The rate of infections caused by resistant bacteria to the antimicrobials available for human use grows exponentially every year, which generates major impacts on human health and the world economy. In the last two decades, human beings can witness the expressive increase in the Science and Technology worldwide, and areas such as Health Sciences have benefited from these advances in favor of human health, such as the advent of Pharmaceutical Nanotechnology as an important approach applied for bacterial infections treatment with resistance profile to available antibiotics. This review of the scientific literature brings the applicability of nanotechnology-based lipid systems as an innovative tool in the improvement of bacterial infections treatment. Important studies involving the use of liposomes, solid lipid nanoparticles, nanostructured lipid carriers, nanoemulsions, microemulsions and lipid nanocapsules were verified in the period from 2000 to 2020, where important scientific results were found and will serve as a basis for the use of these systems to remain in constant updating. This manuscript shows the use of these drug delivery systems as potential vehicles for antibacterial compounds, which opens a new hope in the complement of the antibacterial therapeutic arsenal. Important studies developed in the last 20 years are present in this review, and thus guarantees an update on the use of these drug delivery systems for researchers from different areas of Health Sciences.

Development of Microemulsion Containing Alpinia galanga Oil and Its Major Compounds: Enhancement of Antimicrobial Activities

The aim of the present study was to develop a microemulsion (ME) containing Alpinia galanga oil (AGO), 1,8-cineole (C), or methyl eugenol (M) as an active pharmaceutical ingredient (API) for enhancing their antimicrobial activities. Agar diffusion, broth microdilution, and killing kinetics were used for antimicrobial evaluations. The ME composed of 30% API, 33.4% Tween 80, 16.6% ethanol, and 20% water appeared as translucent systems with droplet size and polydispersity index of 101.1 ± 1.3 nm and 0.3 ± 0.1, 80.9 ± 1.1 nm and 0.4 ± 0.1, and 96.6 ± 2.0 nm and 0.2 ± 0.1 for ME-AGO, ME-C, and ME-M, respectively. These ME formulations showed minimum bacterial concentrations of 3.91–31.25 µg/mL and 50% fungal inhibition concentrations of 1.83 ± 0.27–0.46 ± 0.13 µg/mL, 2–4 times stronger, and faster kinetic killing rate than their respective API alone. Keeping the ME formulations at 4 °C, 25 °C, and 40 °C for 12 weeks did not affect their activities against fungi and Gram-negative bacteria, but the high temperature of 40 °C decreased their activities against Gram-positive bacteria. It is concluded that ME is a promising delivery system for AGO and its major compounds to enhance their water miscibility and antimicrobial activities.

Nanotechnology for virus treatment

The continued emergence of novel viruses poses a significant threat to global health. Uncontrolled outbreaks can result in pandemics that have the potential to overburden our healthcare and economic systems. While vaccination is a conventional modality that can be employed to promote herd immunity, antiviral vaccines can only be applied prophylactically and do little to help patients who have already contracted viral infections. During the early stages of a disease outbreak when vaccines are unavailable, therapeutic antiviral drugs can be used as a stopgap solution. However, these treatments do not always work against emerging viral strains and can be accompanied by adverse effects that sometimes outweigh the benefits. Nanotechnology has the potential to overcome many of the challenges facing current antiviral therapies. For example, nanodelivery vehicles can be employed to drastically improve the pharmacokinetic profile of antiviral drugs while reducing their systemic toxicity. Other unique nanomaterials can be leveraged for their virucidal or virus-neutralizing properties. In this review, we discuss recent developments in antiviral nanotherapeutics and provide a perspective on the application of nanotechnology to the SARS-CoV-2 outbreak and future virus pandemics.

In-Vitro Antibacterial and Anti-Inflammatory Effects of Surfactin-Loaded Nanoparticles for Periodontitis Treatment

Periodontitis is an inflammatory disease associated with biofilm formation and gingival recession. The practice of nanotechnology in the clinical field is increased overtime due to its potential advantages in drug delivery applications. Nanoparticles can deliver drugs into the targeted area with high efficiency and cause less damages to the tissues. In this study, we investigated the antibacterial and anti-inflammatory properties of surfactin-loaded κ-carrageenan oligosaccharides linked cellulose nanofibers (CO-CNF) nanoparticles. Three types of surfactin-loaded nanoparticles were prepared based on the increasing concentration of surfactin such as 50SNPs (50 mg surfactin-loaded CO-CNF nanoparticles), 100SNPs (100 mg surfactin-loaded CO-CNF nanoparticles), and 200SNPs (200 mg surfactin-loaded CO-CNF nanoparticles). The results showed that the nanoparticles inhibited the growth of Fusobacterium nucleatum and Pseudomonas aeruginosa. The reduction in biofilm formation and metabolic activity of the bacteria were confirmed by crystal violet and MTT assay, respectively. Besides, an increase in oxidative stress was also observed in bacteria. Furthermore, anti-inflammatory effects of surfactin-loaded CO-CNF nanoparticles was observed in lipopolysaccharide (LPS)-stimulated human gingival fibroblast (HGF) cells. A decrease in the production of reactive oxygen species (ROS), transcription factor, and cytokines were observed in the presence of nanoparticles. Collectively, these observations supported the use of surfactin-loaded CO-CNF as a potential candidate for periodontitis management.

Improved antimicrobial properties of methylene blue attached to silver nanoparticles

Photosensitizing agents are the cornerstone of Photodynamic Therapy (PDT). They play an essential role in deactivation process of multidrug resistant pathogens and tumor treatments. In this work, we studied a photosensitizing agent made from mixture of Silver Nanoparticles (Ag NPs) and Methylene Blue (MB) which possess improved important characteristics like high photostability and high singlet oxygen yield. Ag NPs were synthesized by pulsed laser ablation technique in different aqueous solutions like polyvinylpyrrolidone (PVP), citrate and Deionized (DI) water. The synthesized AgNPs were characterized in depth using with transmission electron microscopy (TEM), UV-vis (UV-vis), and photoluminescence (PL) spectra. These Ag NPs were combined with MB and used to eradicate the Gram-negative bacteria, Escherichia coli (E. coli), and Gram-positive bacteria, Staphylococcus aureus (S. aureus). MB and Ag NPs mixture was found to possess higher antimicrobial activity and thus were more effective in killing both Gram -positive and Gram-negative bacteria in comparison to individual exposure of MB and Ag NPs. Additionally, the antimicrobial effects varied with respect to the size of nanoparticles as well as the medium used for their synthesis. The data from this study supports the potential use of the proposed method in PDT where standard photosensitizers have limitations.

Eco friendly silver nanoparticles synthesis by Brassica oleracea and its antibacterial, anticancer and antioxidant properties

Production of environmentally amenable silver nanoparticles (AgNPs) has garnered the interest of the scientific community owing to their broad application primarily in the field of optronics, sensing and extensively in pharmaceuticals as promising antioxidant, antimicrobial and anticancer agents. The current study emphases on production of ecofriendly silver nanoparticles from Brassica oleracea (BO) and investigated their antibacterial, anticancer and antioxidant activity. The characteristics of synthesized BO-AgNPs were studied by ultraviolet-visible spectroscopy, particle size analysis, electro kinetic/zeta potential analysis, and Transmission electron microscope (TEM). A distinctive absorption maximum at 400 nm confirmed the formation of BO-AgNPs and data on TEM analysis have shown that the synthesized nanoparticles were predominantly spherical in shape. The BO-AgNPs obtained were assessed for antibacterial, antioxidant, and cytotoxic ability in MCF-7 cells. The antibacterial activity expressed was maximum against Staphylococcus epidermidis (Gram positive) and Pseudomonas aeruginosa (Gram negative) with DIZ of 14.33 ± 0.57 and 12.0 ± 0.20 mm respectively. Furthermore, the ability of the synthesized green nanoparticles to scavenge free radicals revealed a strong antioxidant activity. The cytotoxicity increased proportionately with increasing concentration of the green synthesized BO-AgNPs with maximum effect at 100 μg/ml and IC50 of 55 μg/ml. In conclusion, the data obtained in the study is reflective of the role of BO-AgNPs as potential and promising antimicrobial agent against bacterial infections and potential anticancer agent in cancer therapy.

Synthesis of bioactive silver nanoparticles using alginate, fucoidan and laminaran from brown algae as a reducing and stabilizing agent

In this report, polysaccharides - alginate, fucoidan, laminaran - were isolated from marine algae Saccharina cichorioides and Fucus evanescens and their activity as a reducing and stabilizing agents in the biogenic synthesis of silver nanoparticles was evaluated. The cytotoxic and antibacterial properties of obtained nanoparticles were also assessed. It was found that all tested polysaccharides could be used as a reducing agent; however, their catalytic activities varied significantly in the following range alginate < fucoidan < laminaran. Nanoparticles demonstrated cytotoxicity against rat C6 glioma cells. It was considerably higher for alginate- and laminaran-obtained nanosilver samples compared to fucoidan. Additionally, silver nanoparticles possessed considerable antibacterial properties more pronounced in fucoidan-obtained samples. Our data demonstrate that different algal polysaccharides can be used for the synthesis of silver nanoparticles with varying bioactivities.

Enhanced Antibacterial Activity of Se Nanoparticles Upon Coating with Recombinant Spider Silk Protein eADF4(κ16)

PURPOSE

Selenium nanoparticles (Se NPs) are promising antibacterial agents to tackle the growing problem of antimicrobial resistance. The aim of this study was to fabricate Se NPs with a net positive charge to enhance their antibacterial efficacy.

METHODS

Se NPs were coated with a positively charged protein - recombinant spider silk protein eADF4(κ16) - to give them a net positive surface charge. Their cytotoxicity and antibacterial activity were investigated, with negatively charged polyvinyl alcohol coated Se NPs as a control. Besides, these eADF4(κ16)-coated Se NPs were immobilized on the spider silk films, and the antibacterial activity of these films was investigated.

RESULTS

Compared to the negatively charged polyvinyl alcohol coated Se NPs, the positively charged eADF4(κ16)-coated Se NPs demonstrated a much higher bactericidal efficacy against the Gram-negative bacteria E. coli, with a minimum bactericidal concentration (MBC) approximately 50 times lower than that of negatively charged Se NPs. Cytotoxicity testing showed that the eADF4(κ16)-coated Se NPs are safe to both Balb/3T3 mouse embryo fibroblasts and HaCaT human skin keratinocytes up to 31 µg/mL, which is much higher than the MBC of these particles against E. coli (8 ± 1 µg/mL). In addition, antibacterial coatings were created by immobilising the eADF4(κ16)-coated Se NPs on positively charged spider silk films and these were shown to retain good bactericidal efficacy and overcome the issue of low particle stability in culture broth. It was found that these Se NPs needed to be released from the film surface in order to exert their antibacterial effects and this release can be regulated by the surface charge of the film, such as the change of the spider silk protein used.

CONCLUSION

Overall, eADF4(κ16)-coated Se NPs are promising new antibacterial agents against life-threatening bacteria.

Comparison of a topical surfactant and a topical antibiotic in the rat comb burn model

BACKGROUND

Burn injury progression in the secondary zone of ischemia is common leading to delayed healing and increased scarring. We hypothesized that a topical surfactant, would reduce burn injury progression in a validated rat comb burn model compared with topical antibiotic ointment.

METHODS

We created 40 comb burns on 20 rats which were randomized to daily topical application of the surfactant or a triple antibiotic ointment. The comb burns consisted of 4 full thickness burns with 3 unburned interspaces between the 4 burns. These unburned interspaces represented the zone of ischemia, and when left untreated, generally progress to full thickness necrosis within several days. Comb burns were assessed daily for the presence of gross necrosis of the interspaces. At 7 days the comb burns were excised and blindly evaluated for the presence of histological evidence of necrosis. The study had 80% power to detect a 25% difference in the percentages of necrotic interspaces on day 7.

RESULTS

There were no differences in the percentages of histologically necrotic interspaces at 7 days in burns treated with the surfactant or antibiotic ointment (85% [95%CI, 74 to 92] vs. 75% [95%CI, 63 to 84]; mean difference 10% [95%CI -4 to 24]). There were also no between group differences in the percentages of grossly necrotic interspaces on any of the seven days of the experiment. The surfactant remained intact and adherent while the antibiotic had been absorbed at each daily dressing change.

CONCLUSIONS

A topical surfactant did not reduce injury progression in the rat comb burn model when compared with antibiotic ointment. The surfactant was more durable than the antibiotic ointment.

The critical role of the dispersant agents in the preparation and ecotoxicity of nanomaterial suspensions

This work reports the role of different dispersants, namely, polyethylene glycol (PEG 200 2%), ethylene glycol 5%, ethanol 2%, dimethyl sulfoxide (DMSO 5%), and polyvinyl alcohol (PVA 5%) in the toxicity profile of several commercial nanomaterials (NM), such as hydrophilic and hydrophobic TiO₂, hydrophilic SiO₂, SiO₂ in aqueous suspension (aq), and ZnO towards the bioluminescent bacterium Aliivibrio fischeri. The majority of NM showed tendency to form agglomerates in the different dispersants. Although some particle agglomeration could be detected, DMSO at 5% was the best dispersant for hydrophobic TiO₂ NM while PVA at 5% was the most effective dispersant for the other types of NM. Average size was not the most relevant aspect accounting for their toxicity. A remarkable reduction in average size was followed by a decrease in NM toxicity, as demonstrated for SiO₂ aq. in PVA 5%. Contrarily, despite of high particle agglomeration, ZnO NM showed a higher toxicity to bacteria when compared with other tested NM. Independently of the average particle size or surface charge, the dispersant either enhanced the toxicity to bacteria or acted as physical barrier decreasing the NM harmful effect to A. fischeri.

Impacts of morphological-controlled ZnO nanoarchitectures on aerobic microbial communities during real wastewater treatment in an aerobic-photocatalytic system

This study aimed to evaluate the impacts of morphological-controlled ZnO nanoarchitectures on aerobic microbial communities during real wastewater treatment in an aerobic-photocatalytic system. Results showed that the antibacterial properties of ZnO nanoarchitectures were significantly more overwhelming than their photocatalytic properties. The inhibition of microbial activities in activated sludge by ZnO nanoarchitectures entailed an adverse effect on wastewater treatment efficiency. Subsequently, the 16S sequencing analysis were conducted to examine the impacts of ZnO nanoarchitectures on aerobic microbial communities, and found the significantly lower microbial diversity and species richness in activated sludge treated with 1D-ZnO nanorods as compared to other ZnO nanoarchitectures. Additionally, 1D-ZnO nanorods reduced the highest proportion of Proteobacteria phylum in activated sludge due to its higher proportion of active polar surfaces that facilitates Zn²⁺ ions dissolution. Pearson correlation coefficients showed that the experimental data obtained from COD removal efficiency and bacterial log reduction were statistically significant (p-value < 0.05), and presented a positive correlation with the concentration of Zn²⁺ ions. Finally, a non-parametric analysis of Friedman test and post-hoc analysis confirmed that the concentration of Zn²⁺ ions being released from ZnO nanoarchitectures is the main contributing factor for both the reduction in COD removal efficiency and bacterial log reduction.

Multi-dimensional zinc oxide (ZnO) nanoarchitectures as efficient photocatalysts: What is the fundamental factor that determines photoactivity in ZnO?

While bulk zinc oxide (ZnO) is of non-toxic in nature, ZnO nanoarchitectures could potentially induce the macroscopic characteristics of oxidative, lethality and toxicity in the water environment. Here we report a systematic study through state-of-the-art controllable synthesis of multi-dimensional ZnO nanoarchitectures (i.e. 0D-nanoparticle, 1D-nanorod, 2D-nanosheet, and 3D-nanoflowers), and subsequent in-depth understanding on the fundamental factor that determines their photoactivities. The photoactivities of resultant ZnO nanoarchitectures were interpreted in terms of the photodegradation of salicylic acid as well as inactivation of Bacillus subtilis and Escherichia coli under UV-A irradiation. Photodegradation results showed that 1D-ZnO nanorods demonstrated the highest salicylic acid photodegradation efficiency (99.4%) with a rate constant of 0.0364 min^-1. 1D-ZnO nanorods also exhibited the highest log reductions of B. subtilis and E. coli of 3.5 and 4.2, respectively. Through physicochemical properties standardisation, an intermittent higher k value for pore diameter (0.00097 min^-1 per mm), the highest k values for crystallite size (0.00171 min^-1 per nm) and specific surface area (0.00339 min^-1 per m²/g) contributed to the exceptional photodegradation performance of nanorods. Whereas, the average normalised log reduction against the physicochemical properties of nanorods (i.e. low crystallite size, high specific surface area and pore diameter) caused the strongest bactericidal effect.

Cetylpyridinium chloride produces increased zeta-potential on Salmonella Typhimurium cells, a mechanism of the pathogen's inactivation

Cetylpyridinium chloride (CPC) is a quaternary ammonium sanitizer approved for fresh poultry animal carcass sanitization from microbial human pathogens, such as Salmonella enterica. Nonetheless, the interactions of CPC with Salmonella cells, and the mechanism of the sanitizer's neutralization by lecithin remains largely unknown. This study aimed to investigate the interaction of CPC with lecithin and Salmonella Typhimurium to determine the interactions of the sanitizer and neutralizer impacting the bacterium's survival. Application of 0.8% CPC is proposed to produce loss of microbial membrane integrity with loss of electrostatic repulsion between individual cells, resulting in the eventual emulsification of membrane lipids with cytoplasmic contents leakage. Our findings point to a two-phase interaction between CPC and lecithin impacting S. Typhimurium survival. The first consists of electrostatic attraction and charge neutralization between oppositely charged components of pathogen cell and CPC. The second involves formation of aggregates between sanitizer and pathogen, or between sanitizer, pathogen membrane lipids, and lecithin.

Nanoemulsions of Green Tea Catechins and Other Natural Compounds for the Treatment of Urinary Tract Infection: Antibacterial Analysis

Purpose: Nanoemulsions (NEs) of polyphenon 60 (P60) and cranberry (NE I) and P60 and curcumin (NE II) were prepared with the aim to enhance anti-bacterial potential and to understand the mechanism of anti-bacterial action of the encapsulated compounds. Methods: To evaluate the antibacterial potential of the developed NE, microtiter biofilm formation assay was performed. The cytotoxicity analysis was done to assess the toxicity profile of the NEs. Further antibacterial analysis against uropathogenic strains was performed to check the developed NEs were effective against these strains. Results: In microtiter dish biofilm formation assay, both NE formulations inhibited the growth more effectively (Av. % inhibition ~84%) as compared to corresponding aqueous solution (Av. % inhibition ~64%) and placebo (Av. % inhibition ~59%) at their respective minimum inhibitory concentration (MIC) values. Cytotoxicity analysis using 3-(4,5-Dimethylthiazol-2-yl)- 2,5-diphenyltetrazolium bromide (MTT assay) showed that the formulations were nontoxic to Vero cells. The antibacterial studies against uropathogenic resistant strains also showed that NEs effectively inhibited the growth of bacterial strains. Conclusion: From different studies it was concluded that both the NE's were able to inhibit bacterial strains and could be further used for the treatment of urinary tract infection (UTI). The antibacterial activity of developed NEs showed that these could be used as alternative therapies for the treatment of UTI.

Engineering highly effective antimicrobial selenium nanoparticles through control of particle size

The overuse of antibiotics has induced the rapid development of antibiotic resistance in bacteria. As a result, antibiotic efficacy has become limited, and infection with multidrug-resistant bacteria is considered to be one of the largest global human health threats. Consequently, new, effective and safe antimicrobial agents need to be developed urgently. One promising candidate to address this requirement is selenium nanoparticles (Se NPs), which are made from the essential dietary trace element Se and have antimicrobial activity against Gram-positive bacteria. The size of nanomaterials can strongly affect their biophysical properties and functions; however, the effects of the size of Se NPs on their antibacterial efficacy has not been systematically investigated. Therefore, in this work, spherical Se NPs ranging from 43 to 205 nm in diameter were fabricated, and their mammalian cytotoxicity and antibacterial activity as a function of their size were systematically studied. The antibacterial activity of the Se NPs was shown to be strongly size dependent, with 81 nm Se NPs showing the maximal growth inhibition and killing effect of methicillin-sensitive and methicillin-resistant Staphylococcus aureus (MSSA and MRSA). The Se NPs were shown to have multi-modal mechanisms of action that depended on their size, including depleting internal ATP, inducing ROS production, and disrupting membrane potential. All the Se NPs were non-toxic towards mammalian cells up to 25 μg mL-1. Furthermore, the MIC value for the 81 nm particles produced in this research is 16 ± 7 μg mL-1, significantly lower than previously reported MIC values for Se NPs. This data illustrates that Se NP size is a facile yet critical and previously underappreciated parameter that can be tailored for maximal antimicrobial efficacy. We have identified that using Se NPs with a size of 81 nm and concentration of 10 μg mL-1 shows promise as a safe and efficient way to kill S. aureus without damaging mammalian cells.

Green synthesis of silver nanoparticles: effect of synthesis reaction parameters on antimicrobial activity

In this work, the biosynthesis of silver nanoparticles by Galega officinalis extract using AgNO₃ as a precursor was reported. The reaction parameters for the biosynthesis and efficiency in their antimicrobial control against Escherichia coli, Staphylococcus aureus and Pseudomonas syringae were determined. For biosynthesis, a central composite design combined with response surface methodology was used to optimize the process parameters (pH, AgNO₃ and extract concentration), and the design was assessed through the size distribution, zeta potential and polydispersity index of the nanoparticles. The results demonstrated that at pH 11, 1.6 mM of AgNO₃ and 15% vv^-1 of G. officinalis extract were the optimal reaction parameters. Transmission electron microscope (TEM) images and X-ray diffraction (XRD) confirmed the formation of small spherical silver nanoparticles. Antimicrobial assays showed a high inhibitory effect against E. coli, S. aureus and P. syringae, and that effect was larger with silver nanoparticles of a smaller size (23 nm). This work demonstrates that G. officinalis extract is a feasible medium for the synthesis of silver nanoparticles and that the control of the reaction parameters can determine the nanoparticle characteristics and therefore their antimicrobial effectiveness.

Surfactants: Role in biofilm management and cellular behaviour

Appropriate and effective wound cleaning represents an important process that is necessary for preparing the wound for improved wound healing and for helping to dislodge biofilms. Wound cleaning is of paramount importance to wound bed preparation for helping to enhance wound healing. Surfactant applications in wound care may represent an important area in the cleaning continuum. However, understanding of the role and significance of surfactants in wound cleansing, biofilm prevention and control, and enhancing cellular viability and proliferation is currently lacking. Despite this, some recent evidence on poloxamer-based surfactants where the surfactants are present in high concentration have been shown to have an important role to play in biofilm management; matrix metalloproteinase modulation; reducing inflammation; and enhancing cellular proliferation, behaviour, and viability. Consequently, this review aims to discuss the role, mode of action, and clinical significance of the use of medically accepted surfactants, with a focus on concentrated poloxamer-based surfactants, to wound healing but, more specifically, the role they may play in biofilm management and effects on cellular repair.

Sputtering of Electrospun Polymer-Based Nanofibers for Biomedical Applications: A Perspective

Electrospinning has gained wide attention recently in biomedical applications. Electrospun biocompatible scaffolds are well-known for biomedical applications such as drug delivery, wound dressing, and tissue engineering applications. In this review, the synthesis of polymer-based fiber composites using an electrospinning technique is discussed. Formerly, metal particles were then deposited on the surface of electrospun fibers using sputtering technology. Key nanometals for biomedical applications including silver and copper nanoparticles are discussed throughout this review. The formulated scaffolds were found to be suitable candidates for biomedical uses such as antibacterial coatings, surface modification for improving biocompatibility, and tissue engineering. This review briefly mentions the characteristics of the nanostructures while focusing on how nanostructures hold potential for a wide range of biomedical applications.